rfc9634.original.xml   rfc9634.xml 
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="UTF-8"?>
<!-- pre-edited by ST 03/14/24 -->
<!DOCTYPE rfc [ <!DOCTYPE rfc [
<!ENTITY nbsp "&#160;"> <!ENTITY nbsp "&#160;">
<!ENTITY zwsp "&#8203;"> <!ENTITY zwsp "&#8203;">
<!ENTITY nbhy "&#8209;"> <!ENTITY nbhy "&#8209;">
<!ENTITY wj "&#8288;"> <!ENTITY wj "&#8288;">
]> ]>
<rfc xmlns:xi="http://www.w3.org/2001/XInclude" category="info" ipr="trust200902
" docName="draft-ietf-detnet-ip-oam-13" obsoletes="" updates="" submissionType=" <rfc xmlns:xi="http://www.w3.org/2001/XInclude" category="info" ipr="trust200902
IETF" xml:lang="en" tocInclude="true" tocDepth="3" symRefs="true" sortRefs="true " docName="draft-ietf-detnet-ip-oam-13" number="9634" consensus="true" obsoletes
" version="3"> ="" updates="" submissionType="IETF" xml:lang="en" tocInclude="true" tocDepth="3
<!-- xml2rfc v2v3 conversion 3.6.0 --> " symRefs="true" sortRefs="true" version="3">
<?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?>
<front> <front>
<title abbrev="OAM for DetNet over IP">Operations, Administration, and Maint <title abbrev="OAM for DetNet over IP">Operations, Administration, and Maint
enance (OAM) for Deterministic Networks (DetNet) with IP Data Plane</title> enance (OAM) for Deterministic Networking (DetNet) with the IP Data Plane</title
<seriesInfo name="Internet-Draft" value="draft-ietf-detnet-ip-oam-13"/> >
<seriesInfo name="RFC" value="9634"/>
<author initials="G." surname="Mirsky" fullname="Greg Mirsky"> <author initials="G." surname="Mirsky" fullname="Greg Mirsky">
<organization>Ericsson</organization> <organization>Ericsson</organization>
<address> <address>
<email>gregimirsky@gmail.com</email> <email>gregimirsky@gmail.com</email>
</address> </address>
</author> </author>
<author fullname="Mach(Guoyi) Chen" initials="M." surname="Chen"> <author fullname="Mach(Guoyi) Chen" initials="M." surname="Chen">
<organization>Huawei</organization> <organization>Huawei</organization>
<address> <address>
<postal>
<street/>
<city/>
<code/>
<country/>
</postal>
<email>mach.chen@huawei.com</email> <email>mach.chen@huawei.com</email>
</address> </address>
</author> </author>
<author initials="D" surname="Black" fullname="David Black"> <author initials="D." surname="Black" fullname="David Black">
<organization>Dell EMC</organization> <organization>Dell EMC</organization>
<address> <address>
<postal> <postal>
<street>176 South Street</street> <street>176 South Street</street>
<city>Hopkinton, MA</city> <city>Hopkinton</city><region>MA</region>
<code>01748</code> <code>01748</code>
<country>United States of America</country> <country>United States of America</country>
</postal> </postal>
<email>david.black@dell.com</email> <email>david.black@dell.com</email>
</address> </address>
</author> </author>
<date year="2024"/> <date month="October" year="2024"/>
<area>Routing</area> <area>RTG</area>
<workgroup>DetNet Working Group</workgroup> <workgroup>detnet</workgroup>
<keyword>Internet-Draft</keyword>
<keyword>DetNet</keyword> <keyword>DetNet</keyword>
<keyword>OAM</keyword> <keyword>OAM</keyword>
<abstract> <abstract>
<t> <t>
This document discusses the use of existing IP Operations, This document discusses the use of existing IP Operations,
Administration, and Maintenance protocols and mechanisms in Administration, and Maintenance protocols and mechanisms in
Deterministic Networking networks that use the IP data plane. Deterministic Networking networks that use the IP data plane.
</t> </t>
</abstract> </abstract>
</front> </front>
<middle> <middle>
<section anchor="intro" numbered="true" toc="default"> <section anchor="intro" numbered="true" toc="default">
<name>Introduction</name> <name>Introduction</name>
<t> <t>
<xref target="RFC8655" format="default"/> introduces and explains Determinist ic Networks (DetNet) <xref target="RFC8655" format="default"/> introduces and explains the Determi nistic Networking (DetNet)
architecture. architecture.
</t> </t>
<t> <t>
Operations, Administration, and Maintenance (OAM) protocols are used Operations, Administration, and Maintenance (OAM) protocols are used
to detect and localize defects in the network as well as to monitor network to detect and localize defects in the network as well as to monitor network
performance. Some OAM functions (e.g., failure detection), work in performance. Some OAM functions (e.g., failure detection) work in
the network proactively, while others (e.g., defect localization) are the network proactively, while others (e.g., defect localization) are
usually performed on-demand. These tasks are achieved by a combination usually performed on demand. These tasks are achieved by a combination
of active and hybrid OAM methods, as defined in <xref target="RFC7799"/>. of active and hybrid OAM methods, as defined in <xref target="RFC7799"/>.
</t> </t>
<t> <t>
<xref target="I-D.ietf-detnet-oam-framework" format="default"/> lists the OAM <xref target="RFC9551" format="default"/> lists the OAM functional requiremen
functional requirements ts
for DetNet, and defines the principles for OAM use within DetNet for DetNet and defines the principles for OAM use within DetNet
networks utilizing the IP data plane. The functional requirements networks utilizing the IP data plane. The functional requirements
can be compared against current OAM tools to identify gaps and can be compared against current OAM tools to identify gaps and
potential enhancements required to enable proactive and on-demand potential enhancements required to enable proactive and on-demand
path monitoring and service validation. path monitoring and service validation.
</t> </t>
<t> <t>
This document discusses the use of existing IP OAM protocols and mechan isms in This document discusses the use of existing IP OAM protocols and mechan isms in
DetNet networks that use the IP data plane. DetNet networks that use the IP data plane.
</t> </t>
</section> </section>
<section numbered="true" toc="default"> <section numbered="true" toc="default">
<name>Conventions used in this document</name> <name>Conventions Used in This Document</name>
<section numbered="true" toc="default"> <section numbered="true" toc="default">
<name>Terminology</name> <name>Terminology</name>
<t> <t>
The term "DetNet OAM" used in this document interchangeably with longer version The term "DetNet OAM" as used in this document means "a set of OAM protocols, me
"set of OAM protocols, methods and tools for Deterministic Networks". thods, and tools for Deterministic Networking".
</t> </t>
<t>DetNet: Deterministic Networks</t> <dl spacing="normal">
<t>OAM: Operations, Administration, and Maintenance</t> <dt>DetNet:</dt><dd>Deterministic Networking</dd>
<t>ICMP: Internet Control Message Protocol</t> <dt>OAM:</dt><dd>Operations, Administration, and Maintenance</dd>
<t>Underlay Network or Underlay Layer: The network that provides <dt>ICMP:</dt><dd>Internet Control Message Protocol</dd>
connectivity between DetNet nodes. MPLS networks providing LSP <dt>Underlay Network or Underlay Layer:</dt><dd>The network that provide
s
connectivity between DetNet nodes. MPLS networks providing Label Switched Pa
th (LSP)
connectivity between DetNet nodes are an example of the DetNet IP network und erlay connectivity between DetNet nodes are an example of the DetNet IP network und erlay
layer.</t> layer.</dd>
<t>DetNet Node: a node that is an actor in the DetNet domain. DetNet <dt>DetNet Node:</dt><dd>A node that is an actor in the DetNet domain.
domain edge nodes and nodes that perform the Packet Replication and Eliminati DetNet
on Function within the domain are domain edge nodes and nodes that perform the Packet Replication, Elimination,
examples of a DetNet node.</t> and Ordering Functions within the domain are
</section> examples of a DetNet node.</dd>
<!-- </dl>
<section numbered="true" toc="default">
<name>Keywords</name>
<t>
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be interpreted as
described in BCP 14 <xref target="RFC2119" format="default"/> <xref target="R
FC8174" format="default"/>
when, and only when, they appear in all capitals, as shown here.
</t>
</section> </section>
-->
</section> </section>
<section anchor="oam-data-plane" numbered="true" toc="default"> <section anchor="oam-data-plane" numbered="true" toc="default">
<name>Active OAM for DetNet Networks with the IP Data Plane</name> <name>Active OAM for DetNet Networks with the IP Data Plane</name>
<t> <t>
OAM protocols and mechanisms act within the data plane of the particular network ing layer. OAM protocols and mechanisms act within the data plane of the particular network ing layer.
Thus, it is critical that the data plane encapsulation supports OAM mechanisms a nd enables them to be Thus, it is critical that the data plane encapsulation support OAM mechanisms an d enable them to be
configured so that DetNet OAM packets follow the same path configured so that DetNet OAM packets follow the same path
(unidirectional or bidirectional) through the network and receive (unidirectional or bidirectional) through the network and receive
the same forwarding treatment in the DetNet forwarding sub-layer the same forwarding treatment in the DetNet forwarding sub-layer
as the DetNet flow being monitored. as the DetNet flow being monitored.
</t> </t>
<t> <t>
The DetNet data plane encapsulation in a transport network with IP encapsulation s is specified The DetNet data plane encapsulation in a transport network with IP encapsulation s is specified
in Section 6 of <xref target="RFC8939" format="default"/>. in <xref target="RFC8939" sectionFormat="of" section="6"/>.
For the IP underlay network, DetNet flows are identified For the IP underlay network, DetNet flows are identified
by the ordered match to the provisioned information set that, among other elemen ts, includes the IP protocol, source port number, by the ordered match to the provisioned information set that, among other elemen ts, includes the IP protocol type, source port number, and
destination port number. Active IP OAM destination port number. Active IP OAM
protocols like Bidirectional Forwarding Detection (BFD) <xref target="RFC5880" f protocols like Bidirectional Forwarding Detection (BFD) <xref target="RFC5880" f
ormat="default"/> or ormat="default"/> or the
Simple Two-way Active Measurement Protocol (STAMP) <xref target="RFC8762" format Simple Two-way Active Measurement Protocol (STAMP) <xref target="RFC8762" format
="default"/>, ="default"/>
use UDP transport and the well-known UDP port numbers as the destination port. use UDP transport and the well-known UDP port numbers as the respective destinat
ion ports.
For BFD, the UDP destination port is specific to the BFD variant, For BFD, the UDP destination port is specific to the BFD variant,
e.g., Multihop BFD uses port 4784 <xref target="RFC5883"/>. e.g., multihop BFD uses port 4784 <xref target="RFC5883"/>.
</t> </t>
<t> <t>
Thus a DetNet node must be Thus, a DetNet node must be
able to associate an IP DetNet flow with the particular test session to ensure t hat test packets experience the able to associate an IP DetNet flow with the particular test session to ensure t hat test packets experience the
same treatment as the DetNet flow packets. For example, in a network where path selection and DetNet functionality same treatment as the DetNet flow packets. For example, in a network where path selection and DetNet functionality
are based on 3-tuples (destination and source IP addresses are based on 3-tuples (destination and source IP addresses
in combination with the Differentiated Services Code Point value) that assoc iation can be achieved in combination with the Differentiated Services Code Point value), that assoc iation can be achieved
by having the OAM traffic use the same 3-tuple as the monitored by having the OAM traffic use the same 3-tuple as the monitored
IP DetNet flow. IP DetNet flow.
In such a scenario, an IP OAM session between the same pair of IP nodes would sh are the network treatment In such a scenario, an IP OAM session between the same pair of IP nodes would sh are the network treatment
with the monitored IP DetNet flow regardless of whether ICMP, BFD, or STAMP prot ocol is used. with the monitored IP DetNet flow regardless of whether ICMP, BFD, or STAMP is u sed.
</t> </t>
<t> <t>
In IP networks, the majority of on-demand failure detection and localization is achieved through the use In IP networks, the majority of on-demand failure detection and localization is achieved through the use
of the Internet Control Message Protocol (ICMP), utilizing Echo Request and Echo Reply messages, of ICMP, utilizing Echo Request and Echo Reply messages,
along with a set of defined error messages such as Destination Unreachable, whic h provide detailed information through assigned code points. along with a set of defined error messages such as Destination Unreachable, whic h provide detailed information through assigned code points.
<xref target="RFC0792"/> and <xref target="RFC4443"/> define the ICMP for IPv4 a nd IPv6 networks, respectively. <xref target="RFC0792"/> and <xref target="RFC4443"/> define ICMP for IPv4 and I Pv6 networks, respectively.
To utilize ICMP effectively for these purposes within DetNet, DetNet nodes must establish the association To utilize ICMP effectively for these purposes within DetNet, DetNet nodes must establish the association
of ICMP traffic between DetNet nodes with IP DetNet traffic. This entails ensuri ng that such of ICMP traffic between DetNet nodes with IP DetNet traffic. This entails ensuri ng that such
ICMP traffic traverses the same interfaces and receives identical QoS treatment as the monitored DetNet IP flow. ICMP traffic traverses the same interfaces and receives QoS treatment that is id entical to the monitored DetNet IP flow.
Failure to do so may result in ICMP being unable to detect and localize failures specific to the DetNet IP data plane. Failure to do so may result in ICMP being unable to detect and localize failures specific to the DetNet IP data plane.
</t> </t>
<section anchor="native-ip-section" numbered="true" toc="default"> <section anchor="native-ip-section" numbered="true" toc="default">
<name>Mapping Active OAM and IP DetNet flows</name> <name>Mapping Active OAM and IP DetNet Flows</name>
<t> <t>
IP OAM protocols are used to detect failures (e.g., BFD <xref target="RFC5880"/> ) IP OAM protocols are used to detect failures (e.g., BFD <xref target="RFC5880"/> )
and performance degradation (e.g., STAMP <xref target="RFC8762"/>) that affect a n IP DetNet flow. and performance degradation (e.g., STAMP <xref target="RFC8762"/>) that affect a n IP DetNet flow.
It is essential to ensure that specially constructed OAM packets traverse the sa For active OAM to be useful, it is essential to ensure that
me set of nodes and links specially constructed OAM packets traverse the same set of nodes and
and receive the same network QoS treatment as the monitored data flow, e.g., a D links and receive the same network QoS treatment as the monitored
etNet flow, for making active OAM useful. data flow, e.g., a DetNet flow.
When the UDP destination port When the UDP destination port
number used by the OAM protocol is assigned by IANA, then judicious number used by the OAM protocol is assigned by IANA, judicious
selection of the UDP source port may be able to achieve co-routedness selection of the UDP source port may help achieve co-routedness
of OAM with the monitored IP DetNet flow in multipath environments, of OAM with the monitored IP DetNet flow in multipath environments,
e.g., Link Aggregation Group or Equal Cost Multipath, via use of a e.g., Link Aggregation Group or Equal Cost Multipath, via the use of a
UDP source port value that results in the OAM traffic and the UDP source port value that results in the OAM traffic and the
monitored IP DetNet flow hashing to the same path based on the packet monitored IP DetNet flow hashing to the same path based on the packet
header hashes used for path selection. This does assume that forwarding header hashes used for path selection. This does assume that forwarding
equipment along the multipath makes consistent hashing decisions, which equipment along the multipath makes consistent hashing decisions, which
might not always be true in a heterogeneous environment. might not always be true in a heterogeneous environment.
(That also applies to encapsulation techniques described in <xref target="ip-udp (That also applies to the encapsulation techniques described in
-section"/> and <xref target="detnet-udp-section"/>.) Sections&nbsp;<xref target="ip-udp-section" format="counter"/> and <xref target=
"detnet-udp-section" format="counter"/>.)
To ensure the accuracy of OAM results in detecting failures and To ensure the accuracy of OAM results in detecting failures and
monitoring the performance of IP DetNet, it is essential that test packets not o nly traverse the same path as the monitored IP DetNet flow monitoring the performance of IP DetNet, it is essential that test packets not o nly traverse the same path as the monitored IP DetNet flow
but also receive the same treatment by the nodes, e.g., shaping, filtering, poli cing, and availability of the pre-allocated resources, but also receive the same treatment by the nodes, e.g., shaping, filtering, poli cing, and availability of the pre-allocated resources,
as experienced by the IP DetNet packet. That correlation between the particular IP OAM session and the monitored IP DetNet flow as experienced by the IP DetNet packet. That correlation between the particular IP OAM session and the monitored IP DetNet flow
can be achieved by using DetNet provisioning information (e.g., <xref target="I- can be achieved by using DetNet provisioning information (e.g., <xref target="RF
D.ietf-detnet-yang"/>). Each IP OAM protocol session C9633"/>). Each IP OAM protocol session
is presented as a DetNet Application with related service and forwarding sub-lay is presented as a DetNet application with related service and forwarding sub-lay
ers. The forwarding sub-layer of the IP OAM session ers. The forwarding sub-layer of the IP OAM session
is identical to the forwarding sub-layer of the monitored IP DetNet flow, except for information is identical to the forwarding sub-layer of the monitored IP DetNet flow, except for information
in the grouping ip-header, defined in <xref target="I-D.ietf-detnet-yang"/>. in the "ip-header" grouping item as defined in <xref target="RFC9633"/>.
<!--
</t> </t>
</section> </section>
<section anchor="ip-udp-section" numbered="true" toc="default"> <section anchor="ip-udp-section" numbered="true" toc="default">
<name>Active OAM Using IP-in-UDP Encapsulation</name> <name>Active OAM Using IP-in-UDP Encapsulation</name>
<t> <t>
As described above, active IP OAM is realized through several protocols. Some pr otocols use UDP transport, As described above, active IP OAM is realized through several protocols. Some pr otocols use UDP transport,
while ICMP is a network-layer protocol. The amount of operational work mapping I P OAM protocols while ICMP is a network-layer protocol. The amount of operational work mapping I P OAM protocols
to the monitored DetNet flow can be reduced by using an IP/UDP tunnel to carry I P test packets (<xref target="RFC2003"/>). to the monitored DetNet flow can be reduced by using an IP/UDP tunnel <xref targ et="RFC2003"/> to carry IP test packets.
Then, to ensure that OAM packets traverse the same set of nodes and links, the I P/UDP tunnel Then, to ensure that OAM packets traverse the same set of nodes and links, the I P/UDP tunnel
must be mapped to the monitored DetNet flow. Note that the DetNet domain for the must be mapped to the monitored DetNet flow. Note that in such a case, the DetNe
test packet t domain for the test packet
is seen as a single IP link in such a case. As a result, transit DetNet IP nodes is seen as a single IP link. As a result, transit DetNet IP nodes cannot be trac
cannot be traced ed
using the usual traceroute procedure, and a modification of the traceroute may b e required. using the usual traceroute procedure, and a modification of the traceroute may b e required.
</t> </t>
</section> </section>
<section anchor="detnet-udp-section" numbered="true" toc="default"> <section anchor="detnet-udp-section" numbered="true" toc="default">
<name>Active OAM Using DetNet-in-UDP Encapsulation</name> <name>Active OAM Using DetNet-in-UDP Encapsulation</name>
<t> <t>
Active OAM in IP DetNet can be realized using DetNet-in-UDP encapsulation. Active OAM in IP DetNet can be realized using DetNet-in-UDP encapsulation.
Using DetNet-in-UDP tunnel between IP DetNet nodes ensures that active OAM tes t packets follow the same path through Using a DetNet-in-UDP tunnel between IP DetNet nodes ensures that active OAM tes t packets follow the same path through
the network as the monitored IP DetNet flow packets and receive the network as the monitored IP DetNet flow packets and receive
the same forwarding treatment in the DetNet forwarding sub-layer the same forwarding treatment in the DetNet forwarding sub-layer
(see Section 4.1.2 of <xref target="RFC8655"/>) as the IP DetNet flow (see <xref target="RFC8655" sectionFormat="of" section="4.1.2"/>)
as the IP DetNet flow
being monitored. being monitored.
</t> </t>
<t> <t>
<xref target="I-D.ietf-detnet-mpls-over-ip-preof"/> describes how DetNet with MP <xref target="RFC9566"/> describes how DetNet with the MPLS-over-UDP/IP data pla
LS over UDP/IP data plane <xref target="RFC9025"/> can be used ne <xref target="RFC9025"/> can be used
to support Packet Replication, Elimination, and Ordering Functions to potentiall to support Packet Replication, Elimination, and Ordering Functions (PREOF) to po
y lower packet loss, improve the probability of on-time packet delivery tentially lower packet loss, improve the probability of on-time packet delivery,
and ensure in-order packet delivery in IP DetNet's service sub-layer. To ensure that an active OAM test packet follows the path of the monitored and ensure in-order packet delivery in IP DetNet's service sub-layer. To ensure that an active OAM test packet follows the path of the monitored
DetNet flow in the DetNet service sub-layer the encapsulation shown in <xref tar get="ip-detnet-udp-oam"/> is used. DetNet flow in the DetNet service sub-layer, the encapsulation shown in <xref ta rget="ip-detnet-udp-oam"/> is used.
</t> </t>
<figure anchor="ip-detnet-udp-oam"> <figure anchor="ip-detnet-udp-oam">
<name>DetNet Associated Channel Header Format</name> <name>DetNet Associated Channel Header Format</name>
<artwork name="" type="" align="left" alt=""><![CDATA[ <artwork name="" type="" align="left" alt=""><![CDATA[ +---------
+---------------------------------+ ------------------------+
| | | |
| DetNet App-Flow | | DetNet App-Flow |
| (original IP) Packet | | (original IP) Packet |
| | | |
+---------------------------------+ <--\ +---------------------------------+ <--\
| DetNet ACH | | | DetNet ACH | |
+---------------------------------+ +--> PREOF capable +---------------------------------+ +--> PREOF-capable
| Service-ID (S-Label) | | DetNet IP data | Service-ID (S-Label) | | DetNet IP data
+---------------------------------+ | plane encapsulation +---------------------------------+ | plane encapsulation
| UDP Header | | | UDP Header | |
+---------------------------------+ | +---------------------------------+ |
| IP Header | | | IP Header | |
+---------------------------------+ <--/ +---------------------------------+ <--/
| Data-Link | | Data-Link |
+---------------------------------+ +---------------------------------+
| Physical | | Physical |
+---------------------------------+ +---------------------------------+
skipping to change at line 245 skipping to change at line 229
| Service-ID (S-Label) | | DetNet IP data | Service-ID (S-Label) | | DetNet IP data
+---------------------------------+ | plane encapsulation +---------------------------------+ | plane encapsulation
| UDP Header | | | UDP Header | |
+---------------------------------+ | +---------------------------------+ |
| IP Header | | | IP Header | |
+---------------------------------+ <--/ +---------------------------------+ <--/
| Data-Link | | Data-Link |
+---------------------------------+ +---------------------------------+
| Physical | | Physical |
+---------------------------------+ +---------------------------------+
]]></artwork> ]]></artwork>
</figure> </figure>
<t> <ul spacing="normal">
where: <li>DetNet ACH - the DetNet Associated Channel Header as defined in <xre
</t> f target="RFC9546"/>.</li>
<ul empty="true"> <li>PREOF - Packet Replication, Elimination, and Ordering Functions used
<li>DetNet ACH is the DetNet Associated Channel Header defined in <xref in the DetNet service sub-layer as defined in <xref target="RFC8655"/>.</li>
target="I-D.ietf-detnet-mpls-oam"/>.</li> </ul>
<li>PREOF - Packet Replication, Elimination, and Ordering Functions if D
etNet service sub-layer defined in <xref target="RFC8655"/>.</li>
</ul>
</section> </section>
<section anchor="over-gre-section" numbered="true" toc="default"> <section anchor="over-gre-section" numbered="true" toc="default">
<name>The Application of Y.1731/G.8013 Using GRE-in-UDP Encapsulation</n ame> <name>The Application of Y.1731/G.8013 Using GRE-in-UDP Encapsulation</n ame>
<t> <t>
<xref target="RFC8086" format="default"/> has defined the method of encapsulatin g GRE (Generic Routing Encapsulation) headers <xref target="RFC8086" format="default"/> has defined the method of encapsulatin g GRE (Generic Routing Encapsulation) headers
in UDP. GRE-in-UDP encapsulation can be used for IP DetNet OAM as it eases the t in UDP. GRE-in-UDP encapsulation can be used for IP DetNet OAM, as it eases the
ask of mapping an OAM test session task of mapping an OAM test session
to a particular IP DetNet flow that is identified by N-tuple. Matching a GRE-in- to a particular IP DetNet flow that is identified by an N-tuple. Matching a GRE-
UDP tunnel to the monitored IP DetNet flow in-UDP tunnel to the monitored IP DetNet flow
enables the use of Y.1731/G.8013 <xref target="ITU-T.1731" format="default"/> as enables the use of Y.1731/G.8013 <xref target="ITU.Y1731" format="default"/> as
a comprehensive toolset of OAM. The Protocol Type field a comprehensive toolset of OAM. The Protocol Type field
in GRE header must be set to 0x8902, assigned by IANA to IEEE 802.1ag Connectivi in the GRE header must be set to 0x8902, assigned by IANA to the IEEE 802.1ag Co
ty Fault Management (CFM) Protocol / ITU-T Recommendation Y.1731. nnectivity Fault Management (CFM) protocol / ITU-T Recommendation Y.1731.
Y.1731/G.8013 supports the necessary functions required for IP DetNet OAM, i.e., Y.1731/G.8013 supports the necessary functions required for IP DetNet OAM, i.e.,
continuity check, one-way packet loss and packet delay measurement. continuity checks, one-way packet loss, and packet delay measurements.
</t> </t>
</section> </section>
</section> </section>
<!--
<section anchor="hybrid-oam" title="Use of Hybrid OAM in DetNet">
<t>Hybrid OAM methods are used in performance monitoring and defined in <xref ta
rget="RFC7799"/> as:
<list>
<t>Hybrid Methods are Methods of Measurement that use a combination of
Active Methods and Passive Methods.</t>
</list>
A hybrid measurement method may produce metrics as close to passive,
but it still alters something in a data packet even if that is the value of a
designated field in the packet encapsulation. One example of such a hybrid me
asurement method
is the Alternate Marking method (AMM) described in <xref target="RFC8321"/>.
One of the advantages
of the use of AMM in a DetNet domain with the IP data plane is that the marki
ng is applied to a data flow,
thus ensuring that measured metrics are directly applicable to the DetNet flo
w.
</t>
</section>
<section anchor="ip-over-tsn-sec" numbered="true" toc="default"> <section anchor="ip-over-tsn-sec" numbered="true" toc="default">
<name>Active OAM for DetNet IP Interworking with OAM of non-IP DetNet doma ins</name> <name>Active OAM for DetNet IP Interworking with OAM for Non-IP DetNet Domai ns</name>
<t> <t>
A domain in which IP data plane provides DetNet service could be used A domain in which the IP data plane provides DetNet service could be used
in conjunction with a TSN and a DetNet domain with MPLS data plane to deliver en in conjunction with a Time-Sensitive Networking (TSN) network and a DetNet domai
d-to-end service. n with the MPLS data plane to deliver end-to-end service.
In such scenarios, the ability to detect defects and monitor performance using O AM is essential. In such scenarios, the ability to detect defects and monitor performance using O AM is essential.
<xref target="I-D.ietf-detnet-mpls-oam" format="default"/> identified two OAM in <xref target="RFC9546" format="default"/> identifies two OAM interworking models
terworking models - peering and tunneling. -- peering and tunneling.
Interworking between DetNet domains with IP and MPLS data planes analyzed in Sec Interworking between DetNet domains with IP and MPLS data planes is analyzed in
tion 4.2 of <xref target="I-D.ietf-detnet-mpls-oam" format="default"/>. <xref target="RFC9546" sectionFormat="of" section="4.2"/>.
In addition, OAM interworking requirements and recommendations that apply In addition, OAM interworking requirements and recommendations that apply
between a DetNet Domain with the MPLS dataplane and an adjacent TSN between a DetNet domain with the MPLS data plane and an adjacent TSN
network also apply between a DetNet domain with the IP dataplane and network also apply between a DetNet domain with the IP data plane and
an adjacent TSN network. an adjacent TSN network.
</t> </t>
</section> </section>
<section anchor="iana-considerations" numbered="true" toc="default"> <section anchor="iana-considerations" numbered="true" toc="default">
<name>IANA Considerations</name> <name>IANA Considerations</name>
<t> <t>
This document does not have any requests for IANA allocation. This section can be deleted before the publication of the draft. This document has no IANA actions.
</t> </t>
</section> </section>
<section anchor="security-considerations" numbered="true" toc="default"> <section anchor="security-considerations" numbered="true" toc="default">
<name>Security Considerations</name> <name>Security Considerations</name>
<t> <t>
This document describes the applicability of the existing Fault Management an d This document describes the applicability of the existing Fault Management an d
Performance Monitoring IP OAM protocols. Performance Monitoring IP OAM protocols.
It does not raise any security concerns or issues in addition to ones common to networking or It does not raise any security concerns or issues in addition to those common to networking or
already documented in <xref target="RFC0792"/>, <xref target="RFC4443"/>, <xr ef target="RFC5880"/>, already documented in <xref target="RFC0792"/>, <xref target="RFC4443"/>, <xr ef target="RFC5880"/>,
and <xref target="RFC8762"/> for the referenced DetNet and OAM protocols. and <xref target="RFC8762"/> for the referenced DetNet and OAM protocols.
</t> </t>
</section> </section>
</middle> </middle>
<back> <back>
<!-- References split into informative and normative -->
<references> <references>
<name>References</name> <name>References</name>
<references> <references>
<name>Normative References</name> <name>Normative References</name>
<!-- <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.0
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R 792.xml"/>
FC.2119.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.4
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R 443.xml"/>
FC.8174.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8
--> 086.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8
FC.0792.xml"/> 655.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R
FC.4443.xml"/> <!-- draft-ietf-detnet-mpls-oam-15 (RFC 9546; published) -->
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.9
FC.8086.xml"/> 546.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8
FC.8655.xml"/> 939.xml"/>
<xi:include href="https://datatracker.ietf.org/doc/bibxml3/draft-ietf-de <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.9
tnet-mpls-oam.xml"/> 025.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2
FC.8939.xml"/> 003.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R
FC.9025.xml"/> <!-- draft-ietf-detnet-yang (RFC 9633; this doc. to be published with 9633) -->
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R <reference anchor="RFC9633" target="https://www.rfc-editor.org/info/rfc9633">
FC.2003.xml"/> <front>
<xi:include href="https://datatracker.ietf.org/doc/bibxml3/draft-ietf- <title>Deterministic Networking (DetNet) YANG Data Model</title>
detnet-yang.xml"/> <author initials="X." surname="Geng" fullname="Xuesong Geng">
<!-- <organization>Huawei Technologies</organization>
<?rfc include="reference.RFC.6310"?> </author>
<?rfc include="reference.RFC.7023"?> <author initials="Y." surname="Ryoo" fullname="Yeoncheol Ryoo">
<?rfc include="reference.I-D.ietf-detnet-ip-over-mpls"?> <organization>ETRI</organization>
<?rfc include="reference.I-D.ietf-detnet-ip-over-tsn"?> </author>
--> <author initials="D." surname="Fedyk" fullname="Don Fedyk">
<organization>LabN Consulting, L.L.C.</organization>
</author>
<author initials="R." surname="Rahman" fullname="Reshad Rahman">
<organization>Equinix</organization>
</author>
<author initials="Z." surname="Li" fullname="Zhenqiang Li">
<organization>China Mobile</organization>
</author>
<date month="October" year="2024" />
</front>
<seriesInfo name="RFC" value="9633"/>
<seriesInfo name="DOI" value="10.17487/RFC9633"/>
</reference>
</references> </references>
<references> <references>
<name>Informational References</name> <name>Informative References</name>
<reference anchor="ITU-T.1731">
<reference anchor="ITU.Y1731">
<front> <front>
<title>Operations, administration and maintenance (OAM) functions an d mechanisms for Ethernet-based networks</title> <title>Operation, administration and maintenance (OAM) functions and mechanisms for Ethernet-based networks</title>
<author> <author>
<organization>ITU-T</organization> <organization>ITU-T</organization>
</author> </author>
<date month="August" year="2015"/> <date month="June" year="2023"/>
</front> </front>
<seriesInfo name="ITU-T" value="G.8013/Y.1731"/> <seriesInfo name="ITU-T Recommendation" value="G.8013/Y.1731"/>
</reference> </reference>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R
FC.7799.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.7
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.R 799.xml"/>
FC.8762.xml"/> <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8
<!-- <?rfc include="reference.RFC.8321"?> --> 762.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5 <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.58
880.xml"/> 80.xml"/>
<xi:include href="https://xml2rfc.ietf.org/public/rfc/bibxml/reference.RFC.5 <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.58
883.xml"/> 83.xml"/>
<xi:include href="https://datatracker.ietf.org/doc/bibxml3/draft-ietf-de
tnet-oam-framework.xml"/> <!-- draft-ietf-detnet-oam-framework (RFC 9551; published) -->
<xi:include href="https://datatracker.ietf.org/doc/bibxml3/draft-ietf-det <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.95
net-mpls-over-ip-preof.xml"/> 51.xml"/>
<!-- ietf-detnet-mpls-over-ip-preof (RFC 9566; published) -->
<xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.95
66.xml"/>
</references> </references>
</references> </references>
</back> </back>
</rfc> </rfc>
 End of changes. 60 change blocks. 
205 lines changed or deleted 184 lines changed or added

This html diff was produced by rfcdiff 1.48.