diff --git a/Makefile b/Makefile
index 540f7b2..fbf84a4 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 7
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION =
 NAME = Terrified Chipmunk
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 1460a5d..e28670f 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -434,7 +434,7 @@ void hpet_msi_unmask(struct irq_data *data)
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg |= HPET_TN_FSB;
+	cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
@@ -445,7 +445,7 @@ void hpet_msi_mask(struct irq_data *data)
 
 	/* mask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg &= ~HPET_TN_FSB;
+	cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 45e3e17..7efaeaa 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
@@ -95,6 +96,18 @@ enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {
@@ -438,6 +451,21 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 
@@ -486,6 +514,11 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 
@@ -595,6 +628,24 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.
@@ -620,6 +671,32 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index fdcdbb6..847ed55 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -519,6 +519,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 	},
 	{
 	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1S1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
 	.ident = "Sony Vaio VGN-FW520F",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0230cb6..ac9a69c 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -389,6 +389,12 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index b728880..4ac2593 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -156,6 +156,14 @@ static struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "X360"),
 		},
 	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Asus UL30VT",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
+		},
+	},
 	{ },
 };
 
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index e2c17d1..6939009 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -323,7 +323,7 @@ void u8500_clk_init(void)
 	clk_register_clkdev(clk, NULL, "gpioblock1");
 
 	clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE,
-				BIT(11), 0);
+				BIT(12), 0);
 
 	clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE,
 				BIT(0), 0);
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 4f41104..34ab2a8 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -31,6 +31,9 @@ MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
 MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
 MODULE_LICENSE("GPL");
 
+/* Family 16h Northbridge's function 4 PCI ID */
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
+
 /* D18F3 */
 #define REG_NORTHBRIDGE_CAP		0xe8
 
@@ -248,6 +251,7 @@ static void __devexit fam15h_power_remove(struct pci_dev *pdev)
 
 static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 26b5d4b..ec8e914 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -95,6 +95,9 @@ static int pnpacpi_set_resources(struct pnp_dev *dev)
 		return -ENODEV;
 	}
 
+	if (WARN_ON_ONCE(acpi_dev != dev->data))
+		dev->data = acpi_dev;
+
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;
diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c
index b05f5f7..f10ab70 100644
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -4,11 +4,12 @@ static struct usb_device_id InterfaceUsbtable[] = {
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
-	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
diff --git a/drivers/staging/bcm/InterfaceInit.h b/drivers/staging/bcm/InterfaceInit.h
index 866924e..241bf97 100644
--- a/drivers/staging/bcm/InterfaceInit.h
+++ b/drivers/staging/bcm/InterfaceInit.h
@@ -8,11 +8,11 @@
 #define BCM_USB_PRODUCT_ID_T3	0x0300
 #define BCM_USB_PRODUCT_ID_T3B	0x0210
 #define BCM_USB_PRODUCT_ID_T3L	0x0220
-#define BCM_USB_PRODUCT_ID_SM250	0xbccd
 #define BCM_USB_PRODUCT_ID_SYM	0x15E
 #define BCM_USB_PRODUCT_ID_1901	0xe017
 #define BCM_USB_PRODUCT_ID_226	0x0132 /* not sure if this is valid */
 #define BCM_USB_PRODUCT_ID_ZTE_226 0x172
+#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
 #define BCM_USB_PRODUCT_ID_ZTE_TU25	0x0007
 
 #define BCM_USB_MINOR_BASE	192
diff --git a/drivers/staging/telephony/ixj.c b/drivers/staging/telephony/ixj.c
index 1cfa0b0..cf6aa83 100644
--- a/drivers/staging/telephony/ixj.c
+++ b/drivers/staging/telephony/ixj.c
@@ -3190,12 +3190,12 @@ static void ixj_write_cid(IXJ *j)
 
 	ixj_fsk_alloc(j);
 
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);
@@ -3340,12 +3340,12 @@ static void ixj_write_cidcw(IXJ *j)
 		ixj_pre_cid(j);
 	}
 	j->flags.cidcw_ack = 0;
-	strcpy(sdmf1, j->cid_send.month);
-	strcat(sdmf1, j->cid_send.day);
-	strcat(sdmf1, j->cid_send.hour);
-	strcat(sdmf1, j->cid_send.min);
-	strcpy(sdmf2, j->cid_send.number);
-	strcpy(sdmf3, j->cid_send.name);
+	strlcpy(sdmf1, j->cid_send.month, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.day, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.hour, sizeof(sdmf1));
+	strlcat(sdmf1, j->cid_send.min, sizeof(sdmf1));
+	strlcpy(sdmf2, j->cid_send.number, sizeof(sdmf2));
+	strlcpy(sdmf3, j->cid_send.name, sizeof(sdmf3));
 
 	len1 = strlen(sdmf1);
 	len2 = strlen(sdmf2);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6e49ec6..8d809a8 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -787,6 +787,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 	tmp.flags = ASYNC_LOW_LATENCY;
 	tmp.xmit_fifo_size = acm->writesize;
 	tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+	tmp.close_delay	= acm->port.close_delay / 10;
+	tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				acm->port.closing_wait / 10;
 
 	if (copy_to_user(info, &tmp, sizeof(tmp)))
 		return -EFAULT;
@@ -794,6 +798,37 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 		return 0;
 }
 
+static int set_serial_info(struct acm *acm,
+				struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&acm->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != acm->port.close_delay) ||
+		    (closing_wait != acm->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&acm->port.mutex);
+	return retval;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
@@ -804,6 +839,9 @@ static int acm_tty_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL: /* gets serial port data */
 		rv = get_serial_info(acm, (struct serial_struct __user *) arg);
 		break;
+	case TIOCSSERIAL:
+		rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+		break;
 	}
 
 	return rv;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 4b66374..3d98902 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -264,15 +264,9 @@ ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
 __releases(ehci->lock)
 __acquires(ehci->lock)
 {
-	if (likely (urb->hcpriv != NULL)) {
-		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
-
-		/* S-mask in a QH means it's an interrupt urb */
-		if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
-
-			/* ... update hc-wide periodic stats (for usbfs) */
-			ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
-		}
+	if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		/* ... update hc-wide periodic stats */
+		ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
 	}
 
 	if (unlikely(urb->unlinked)) {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 7cf3da7..528a540 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1646,7 +1646,7 @@ static void itd_link_urb(
 
 	/* don't need that schedule data any more */
 	iso_sched_free (stream, iso_sched);
-	urb->hcpriv = NULL;
+	urb->hcpriv = stream;
 
 	++ehci->isoc_count;
 	enable_periodic(ehci);
@@ -2045,7 +2045,7 @@ static void sitd_link_urb(
 
 	/* don't need that schedule data any more */
 	iso_sched_free (stream, sched);
-	urb->hcpriv = NULL;
+	urb->hcpriv = stream;
 
 	++ehci->isoc_count;
 	enable_periodic(ehci);
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index c5a1ea9..9d00d47 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1128,6 +1128,25 @@ dl_done_list (struct ohci_hcd *ohci)
 
 	while (td) {
 		struct td	*td_next = td->next_dl_td;
+		struct ed	*ed = td->ed;
+
+		/*
+		 * Some OHCI controllers (NVIDIA for sure, maybe others)
+		 * occasionally forget to add TDs to the done queue.  Since
+		 * TDs for a given endpoint are always processed in order,
+		 * if we find a TD on the donelist then all of its
+		 * predecessors must be finished as well.
+		 */
+		for (;;) {
+			struct td	*td2;
+
+			td2 = list_first_entry(&ed->td_list, struct td,
+					td_list);
+			if (td2 == td)
+				break;
+			takeback_td(ohci, td2);
+		}
+
 		takeback_td(ohci, td);
 		td = td_next;
 	}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 8345d7c..dcb72f7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,7 @@
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_ASROCK_P67	0x7023
@@ -58,8 +59,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
-		if (pdev->revision == 0x0) {
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
 			xhci->quirks |= XHCI_RESET_EP_QUIRK;
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a8f0523..fecde69 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -246,6 +246,7 @@ config USB_YUREX
 
 config USB_EZUSB_FX2
 	tristate "Functions for loading firmware on EZUSB chips"
+	depends on USB
 	help
 	  Say Y here if you need EZUSB device support.
 	  (Cypress FX/FX2/FX2LP microcontrollers)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eb033fc..402e597 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index be84587..2641d36 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -192,6 +192,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -1781,7 +1782,7 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 
 	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 57c12ef..049b6e7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -752,6 +752,12 @@
 #define TTI_VID			0x103E	/* Vendor Id */
 #define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
 
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID			0x104D
+#define NEWPORT_AGILIS_PID		0x3000
+
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
 #define INTERBIOMETRICS_VID              0x1209
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index edc64bb..da36dc7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -81,6 +81,7 @@ static void option_instat_callback(struct urb *urb);
 #define OPTION_PRODUCT_GTM380_MODEM		0x7201
 
 #define HUAWEI_VENDOR_ID			0x12D1
+#define HUAWEI_PRODUCT_E173			0x140C
 #define HUAWEI_PRODUCT_K4505			0x1464
 #define HUAWEI_PRODUCT_K3765			0x1465
 #define HUAWEI_PRODUCT_K4605			0x14C6
@@ -553,6 +554,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -884,6 +887,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
@@ -904,20 +911,34 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
 	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
@@ -1097,6 +1118,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 0ae7bb6..eab04a6 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -203,7 +203,7 @@ config USB_STORAGE_ENE_UB6250
 
 config USB_UAS
 	tristate "USB Attached SCSI"
-	depends on USB && SCSI
+	depends on USB && SCSI && BROKEN
 	help
 	  The USB Attached SCSI protocol is supported by some USB
 	  storage devices.  It permits higher performance by supporting
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 74df86b..2682295 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -212,13 +212,13 @@ DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
 #endif
 };
 
-static int blimit = 10;		/* Maximum callbacks per rcu_do_batch. */
-static int qhimark = 10000;	/* If this many pending, ignore blimit. */
-static int qlowmark = 100;	/* Once only this many pending, use blimit. */
+static long blimit = 10;	/* Maximum callbacks per rcu_do_batch. */
+static long qhimark = 10000;	/* If this many pending, ignore blimit. */
+static long qlowmark = 100;	/* Once only this many pending, use blimit. */
 
-module_param(blimit, int, 0444);
-module_param(qhimark, int, 0444);
-module_param(qlowmark, int, 0444);
+module_param(blimit, long, 0444);
+module_param(qhimark, long, 0444);
+module_param(qlowmark, long, 0444);
 
 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
 int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
@@ -1769,7 +1769,8 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 {
 	unsigned long flags;
 	struct rcu_head *next, *list, **tail;
-	int bl, count, count_lazy, i;
+	long bl, count, count_lazy;
+	int i;
 
 	/* If no callbacks are ready, just return.*/
 	if (!cpu_has_callbacks_ready_to_invoke(rdp)) {
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 9dcf15d..51b7159 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2437,7 +2437,7 @@ static void reset_iter_read(struct ftrace_iterator *iter)
 {
 	iter->pos = 0;
 	iter->func_pos = 0;
-	iter->flags &= ~(FTRACE_ITER_PRINTALL & FTRACE_ITER_HASH);
+	iter->flags &= ~(FTRACE_ITER_PRINTALL | FTRACE_ITER_HASH);
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b979426..4cb5e51 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1396,6 +1396,8 @@ rb_insert_pages(struct ring_buffer_per_cpu *cpu_buffer)
 		struct list_head *head_page_with_bit;
 
 		head_page = &rb_set_head_page(cpu_buffer)->list;
+		if (!head_page)
+			break;
 		prev_page = head_page->prev;
 
 		first_page = pages->next;
@@ -2934,7 +2936,7 @@ unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu)
 	unsigned long flags;
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct buffer_page *bpage;
-	unsigned long ret;
+	unsigned long ret = 0;
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return 0;
@@ -2949,7 +2951,8 @@ unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu)
 		bpage = cpu_buffer->reader_page;
 	else
 		bpage = rb_set_head_page(cpu_buffer);
-	ret = bpage->page->time_stamp;
+	if (bpage)
+		ret = bpage->page->time_stamp;
 	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	return ret;
@@ -3260,6 +3263,8 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
 	 * Splice the empty reader page into the list around the head.
 	 */
 	reader = rb_set_head_page(cpu_buffer);
+	if (!reader)
+		goto out;
 	cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
 	cpu_buffer->reader_page->list.prev = reader->list.prev;
 
@@ -3778,12 +3783,17 @@ void
 ring_buffer_read_finish(struct ring_buffer_iter *iter)
 {
 	struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
+	unsigned long flags;
 
 	/*
 	 * Ring buffer is disabled from recording, here's a good place
-	 * to check the integrity of the ring buffer. 
+	 * to check the integrity of the ring buffer.
+	 * Must prevent readers from trying to read, as the check
+	 * clears the HEAD page and readers require it.
 	 */
+	raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 	rb_check_pages(cpu_buffer);
+	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	atomic_dec(&cpu_buffer->record_disabled);
 	atomic_dec(&cpu_buffer->buffer->resize_disabled);
diff --git a/mm/dmapool.c b/mm/dmapool.c
index c5ab33b..da1b0f0 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -50,7 +50,6 @@ struct dma_pool {		/* the pool */
 	size_t allocation;
 	size_t boundary;
 	char name[32];
-	wait_queue_head_t waitq;
 	struct list_head pools;
 };
 
@@ -62,8 +61,6 @@ struct dma_page {		/* cacheable header for 'allocation' bytes */
 	unsigned int offset;
 };
 
-#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
-
 static DEFINE_MUTEX(pools_lock);
 
 static ssize_t
@@ -172,7 +169,6 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
 	retval->size = size;
 	retval->boundary = boundary;
 	retval->allocation = allocation;
-	init_waitqueue_head(&retval->waitq);
 
 	if (dev) {
 		int ret;
@@ -227,7 +223,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
 		memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
 #endif
 		pool_initialise_page(pool, page);
-		list_add(&page->page_list, &pool->page_list);
 		page->in_use = 0;
 		page->offset = 0;
 	} else {
@@ -315,30 +310,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
 	might_sleep_if(mem_flags & __GFP_WAIT);
 
 	spin_lock_irqsave(&pool->lock, flags);
- restart:
 	list_for_each_entry(page, &pool->page_list, page_list) {
 		if (page->offset < pool->allocation)
 			goto ready;
 	}
-	page = pool_alloc_page(pool, GFP_ATOMIC);
-	if (!page) {
-		if (mem_flags & __GFP_WAIT) {
-			DECLARE_WAITQUEUE(wait, current);
 
-			__set_current_state(TASK_UNINTERRUPTIBLE);
-			__add_wait_queue(&pool->waitq, &wait);
-			spin_unlock_irqrestore(&pool->lock, flags);
+	/* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
+	spin_unlock_irqrestore(&pool->lock, flags);
 
-			schedule_timeout(POOL_TIMEOUT_JIFFIES);
+	page = pool_alloc_page(pool, mem_flags);
+	if (!page)
+		return NULL;
 
-			spin_lock_irqsave(&pool->lock, flags);
-			__remove_wait_queue(&pool->waitq, &wait);
-			goto restart;
-		}
-		retval = NULL;
-		goto done;
-	}
+	spin_lock_irqsave(&pool->lock, flags);
 
+	list_add(&page->page_list, &pool->page_list);
  ready:
 	page->in_use++;
 	offset = page->offset;
@@ -348,7 +334,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
 #ifdef	DMAPOOL_DEBUG
 	memset(retval, POOL_POISON_ALLOCATED, pool->size);
 #endif
- done:
 	spin_unlock_irqrestore(&pool->lock, flags);
 	return retval;
 }
@@ -435,8 +420,6 @@ void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t dma)
 	page->in_use--;
 	*(int *)vaddr = page->offset;
 	page->offset = offset;
-	if (waitqueue_active(&pool->waitq))
-		wake_up_locked(&pool->waitq);
 	/*
 	 * Resist a temptation to do
 	 *    if (!is_page_busy(page)) pool_free_page(pool, page);
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 5acd6e8..20b0e9e 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -604,19 +604,13 @@ out_free_threads:
 #undef nsyscalls
 }
 
-static int sched__get_first_possible_cpu(pid_t pid, cpu_set_t **maskp,
-					 size_t *sizep)
+static int sched__get_first_possible_cpu(pid_t pid, cpu_set_t *maskp)
 {
-	cpu_set_t *mask;
-	size_t size;
 	int i, cpu = -1, nrcpus = 1024;
 realloc:
-	mask = CPU_ALLOC(nrcpus);
-	size = CPU_ALLOC_SIZE(nrcpus);
-	CPU_ZERO_S(size, mask);
+	CPU_ZERO(maskp);
 
-	if (sched_getaffinity(pid, size, mask) == -1) {
-		CPU_FREE(mask);
+	if (sched_getaffinity(pid, sizeof(*maskp), maskp) == -1) {
 		if (errno == EINVAL && nrcpus < (1024 << 8)) {
 			nrcpus = nrcpus << 2;
 			goto realloc;
@@ -626,19 +620,14 @@ realloc:
 	}
 
 	for (i = 0; i < nrcpus; i++) {
-		if (CPU_ISSET_S(i, size, mask)) {
-			if (cpu == -1) {
+		if (CPU_ISSET(i, maskp)) {
+			if (cpu == -1)
 				cpu = i;
-				*maskp = mask;
-				*sizep = size;
-			} else
-				CPU_CLR_S(i, size, mask);
+			else
+				CPU_CLR(i, maskp);
 		}
 	}
 
-	if (cpu == -1)
-		CPU_FREE(mask);
-
 	return cpu;
 }
 
@@ -653,8 +642,8 @@ static int test__PERF_RECORD(void)
 		.freq	    = 10,
 		.mmap_pages = 256,
 	};
-	cpu_set_t *cpu_mask = NULL;
-	size_t cpu_mask_size = 0;
+	cpu_set_t cpu_mask;
+	size_t cpu_mask_size = sizeof(cpu_mask);
 	struct perf_evlist *evlist = perf_evlist__new(NULL, NULL);
 	struct perf_evsel *evsel;
 	struct perf_sample sample;
@@ -718,8 +707,7 @@ static int test__PERF_RECORD(void)
 	evsel->attr.sample_type |= PERF_SAMPLE_TIME;
 	perf_evlist__config_attrs(evlist, &opts);
 
-	err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask,
-					    &cpu_mask_size);
+	err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask);
 	if (err < 0) {
 		pr_debug("sched__get_first_possible_cpu: %s\n", strerror(errno));
 		goto out_delete_evlist;
@@ -730,9 +718,9 @@ static int test__PERF_RECORD(void)
 	/*
 	 * So that we can check perf_sample.cpu on all the samples.
 	 */
-	if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, cpu_mask) < 0) {
+	if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, &cpu_mask) < 0) {
 		pr_debug("sched_setaffinity: %s\n", strerror(errno));
-		goto out_free_cpu_mask;
+		goto out_delete_evlist;
 	}
 
 	/*
@@ -916,8 +904,6 @@ found_exit:
 	}
 out_err:
 	perf_evlist__munmap(evlist);
-out_free_cpu_mask:
-	CPU_FREE(cpu_mask);
 out_delete_evlist:
 	perf_evlist__delete(evlist);
 out:
