## Automatically generated incremental diff
## From:   linux-2.5.3-pre4
## To:     linux-2.5.3-pre5
## Robot:  $Id: make-incremental-diff,v 1.9 2001/12/10 00:06:56 hpa Exp $

diff -urN linux-2.5.3-pre4/Documentation/Changes linux/Documentation/Changes
--- linux-2.5.3-pre4/Documentation/Changes	Thu Jan 24 12:35:15 2002
+++ linux/Documentation/Changes	Thu Jan 24 12:35:19 2002
@@ -31,7 +31,7 @@
 Eine deutsche Version dieser Datei finden Sie unter
 <http://www.stefan-winter.de/Changes-2.4.0.txt>.
 
-Last updated: November 29, 2001
+Last updated: January 22, 2002
 
 Chris Ricker (kaboom@gatech.edu or chris.ricker@genetics.utah.edu).
 
@@ -106,8 +106,8 @@
 your kernel.  This change does, however, mean that you need a recent
 release of binutils.
 
-System utils
-============
+System utililities
+==================
 
 Architectural changes
 ---------------------
@@ -261,8 +261,8 @@
 Getting updated software
 ========================
 
-Compilers
-*********
+Kernel compilation
+******************
 
 egcs 1.1.2 (gcc 2.91.66)
 ------------------------
@@ -272,15 +272,12 @@
 ----------
 o  <ftp://ftp.gnu.org/gnu/gcc/gcc-2.95.3.tar.gz>
 
-Gnu Make
-********
-
 Make 3.77
 ---------
 o  <ftp://ftp.gnu.org/gnu/make/make-3.77.tar.gz>
 
 Binutils
-********
+--------
 o  <ftp://ftp.kernel.org/pub/linux/devel/binutils/>
 
 System utilities
@@ -332,10 +329,10 @@
 
 Powertweak
 ----------
-o  <http://powertweak.sourceforge.net>
+o  <http://powertweak.sourceforge.net/>
 
-Network
-*******
+Networking
+**********
 
 PPP
 ---
diff -urN linux-2.5.3-pre4/Documentation/Configure.help linux/Documentation/Configure.help
--- linux-2.5.3-pre4/Documentation/Configure.help	Thu Jan 24 12:35:15 2002
+++ linux/Documentation/Configure.help	Wed Dec 31 16:00:00 1969
@@ -1,24419 +0,0 @@
-# Maintained by:
-#	Eric S. Raymond <mailto:esr@thyrsus.com>
-#	Steven Cole <mailto:elenstev@mesatop.com>
-#
-# Merged version 2.61: current with 2.4.16/2.5.1-pre1.
-#
-# This version of the Linux kernel configuration help texts
-# corresponds to kernel versions 2.4.x and 2.5.x.
-#
-# Translations of this file available on the WWW:
-#
-#   - Japanese, maintained by the JF Project <mailto:JF@linux.or.jp>, at
-#     <http://www.linux.or.jp/JF/JFdocs/Configure.help/>
-#   - Russian, by <mailto:kaf@linux.nevod.perm.su>, at
-#     <http://nevod.perm.su/service/linux/doc/kernel/Configure.help>
-#   - French, by Pierre Tane <mailto:tanep@bigfoot.com>, at
-#     <http://www.traduc.org/kernelfr/>
-#   - Polish, by Dominik Mierzejewski <mailto:dmierzej@elka.pw.edu.pl>, at
-#     <http://home.elka.pw.edu.pl/~dmierzej/linux/kernel/>
-#   - German, by SuSE, at <http://www.suse.de/~ke/kernel/>. This patch
-#     also includes infrastructure to support different languages.
-#   - Catalan, by Antoni Bella <mailto:bella5@teleline.es>, at
-#     <http://www.terra.es/personal7/bella5/traduccions.htm>
-#
-# To access a document on the WWW, you need to have a direct Internet
-# connection and a browser program such as netscape or lynx. If you
-# only have email access, you can still use FTP and WWW servers: send
-# an email to <mailto:mail-server@rtfm.mit.edu> with the text
-#   send usenet/news.answers/internet-services/access-via-email
-# in the body of the message.
-#
-# Information about what a kernel is, what it does, how to patch and
-# compile it and much more is contained in the Kernel-HOWTO, available
-# at <http://www.linuxdoc.org/docs.html#howto>. Before you start
-# compiling, make sure that you have the necessary versions of all
-# programs and libraries required to compile and run this kernel; they
-# are listed in the <file:Documentation/Changes>. Make sure to read the
-# toplevel kernel README file as well.
-#
-# Format of this file: description<nl>variable<nl>help text<nl><nl>.
-# The help texts may contain empty lines, but every non-empty line must
-# be indented two positions.  Order of the help texts does not matter,
-# however, no variable should be documented twice: if it is, only the
-# first occurrence will be used. We try to keep the help texts of related
-# variables close together. Lines starting with `#' are ignored. To be
-# nice to menuconfig, limit your line length to 70 characters. Use emacs'
-# kfill.el to edit and ispell.el to spell check this file or you lose.
-#
-# Comments of the form "# Choice:" followed by a menu name are used
-# internally by the maintainers' consistency-checking tools.
-#
-# If you add a help text to this file, please try to be as gentle as
-# possible. Don't use unexplained acronyms and generally write for the
-# hypothetical ignorant but intelligent user who has just bought a PC,
-# removed Windows, installed Linux and is now recompiling the kernel
-# for the first time. Tell them what to do if they're unsure. Technical
-# information should go in a README in the Documentation directory.
-#
-# Mention all the relevant READMEs and HOWTOs in the help text.
-# Make them file URLs relative to the top level of the source tree so
-# that help browsers can turn them into hotlinks.  All URLs ahould be
-# surrounded by <>.
-#
-# Repetitions are fine since the help texts are not meant to be read
-# in sequence.  It is good style to include URLs pointing to more
-# detailed technical information, pictures of the hardware, etc.
-#
-# The most important thing to include in a help entry is *motivation*.
-# Explain why someone configuring a kernel might want to select your
-# option.
-#
-# All this was shamelessly stolen from several different sources. Many
-# thanks to all the contributors. Feel free to use these help texts in
-# your own kernel configuration tools. The texts are copyrighted (c)
-# 1995-2000 by Axel Boldt and many others and are governed by the GNU
-# General Public License.
-
-Prompt for development and/or incomplete code/drivers
-CONFIG_EXPERIMENTAL
-  Some of the various things that Linux supports (such as network
-  drivers, file systems, network protocols, etc.) can be in a state
-  of development where the functionality, stability, or the level of
-  testing is not yet high enough for general use. This is usually
-  known as the "alpha-test" phase among developers. If a feature is
-  currently in alpha-test, then the developers usually discourage
-  uninformed widespread use of this feature by the general public to
-  avoid "Why doesn't this work?" type mail messages. However, active
-  testing and use of these systems is welcomed. Just be aware that it
-  may not meet the normal level of reliability or it may fail to work
-  in some special cases. Detailed bug reports from people familiar
-  with the kernel internals are usually welcomed by the developers
-  (before submitting bug reports, please read the documents
-  <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
-  <file:Documentation/BUG-HUNTING>, and
-  <file:Documentation/oops-tracing.txt> in the kernel source).
-
-  This option will also make obsoleted drivers available. These are
-  drivers that have been replaced by something else, and/or are
-  scheduled to be removed in a future kernel release.
-
-  Unless you intend to help test and develop a feature or driver that
-  falls into this category, or you have a situation that requires
-  using these features, you should probably say N here, which will
-  cause the configurator to present you with fewer choices. If
-  you say Y here, you will be offered the choice of using features or
-  drivers that are currently considered to be in the alpha-test phase.
-
-Prompt for drivers for obsolete features and hardware
-CONFIG_OBSOLETE
-  Obsolete drivers have usually been replaced by more recent software
-  that can talk to the same hardware.  Obsolete hardware is things
-  like MGA monitors that you are very unlikely to see on today's
-  systems.
-
-Symmetric Multi-Processing support
-CONFIG_SMP
-  This enables support for systems with more than one CPU. If you have
-  a system with only one CPU, like most personal computers, say N. If
-  you have a system with more than one CPU, say Y.
-
-  If you say N here, the kernel will run on single and multiprocessor
-  machines, but will use only one CPU of a multiprocessor machine. If
-  you say Y here, the kernel will run on many, but not all,
-  singleprocessor machines. On a singleprocessor machine, the kernel
-  will run faster if you say N here.
-
-  Note that if you say Y here and choose architecture "586" or
-  "Pentium" under "Processor family", the kernel will not work on 486
-  architectures. Similarly, multiprocessor kernels for the "PPro"
-  architecture may not work on all Pentium based boards.
-
-  People using multiprocessor machines who say Y here should also say
-  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
-  Management" code will be disabled if you say Y here.
-
-  See also the <file:Documentation/smp.tex>,
-  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
-  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you don't know what to do here, say N.
-
-Intel or compatible 80x86 processor
-CONFIG_X86
-  This is Linux's home port.  Linux was originally native to the Intel
-  386, and runs on all the later x86 processors including the Intel
-  486, 586, Pentiums, and various instruction-set-compatible chips by
-  AMD, Cyrix, and others.
-
-Alpha processor
-CONFIG_ALPHA
-  The Alpha is a 64-bit general-purpose processor designed and
-  marketed by the Digital Equipment Corporation of blessed memory, now
-  Compaq.  Alpha Linux dates from 1995-1996 and was the first non-x86
-  port. The Alpha Linux project has a home page at
-  <http://www.alphalinux.org/>.
-
-32-bit Sun Sparc
-CONFIG_SPARC32
-  SPARC is a family of RISC microprocessors designed and marketed by
-  Sun Microsystems, incorporated.  They are very widely found in Sun
-  workstations and clones. This port covers the original 32-bit SPARC;
-  it is old and stable and usually considered one of the "big three"
-  along with the Intel and Alpha ports.  The UltraLinux project
-  maintains both the SPARC32 and SPARC64 ports; its web page is
-  available at <http://www.ultralinux.org/>.
-
-64-bit Sun Sparc
-CONFIG_SPARC64
-  SPARC is a family of RISC microprocessors designed and marketed by
-  Sun Microsystems, incorporated.  This port covers the newer 64-bit
-  UltraSPARC.  The UltraLinux project maintains both the SPARC32 and
-  SPARC64 ports; its web page is available at
-  <http://www.ultralinux.org/>.
-
-Power PC processor
-CONFIG_PPC
-  The PowerPC is a very capable 32-bit RISC processor from Motorola,
-  the successor to their 68000 and 88000 series.  It powers recent
-  Macintoshes and also a widely-used series of single-board computers
-  from Motorola.  The Linux PowerPC port has a home page at
-  <http://penguinppc.org/>.
-
-Motorola 68K processors
-CONFIG_M68K
-  The Motorola 68K microprocessors are now obsolete, having been
-  superseded by the PowerPC line also from Motorola.  But they powered
-  the first wave of workstation hardware in the 1980s, including Sun
-  workstations; they were also the basis of the original Amiga and
-  later Atari personal computers.  A lot of this hardware is still
-  around.  The m68k project has a home page at
-  <http://www.linux-m68k.org/>.
-
-ARM processors
-CONFIG_ARM
-  The ARM series is a line of low-power-consumption RISC chip designs
-  licensed by ARM ltd and targeted at embedded applications and
-  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
-  manufactured, but  legacy ARM-based PC hardware remains popular in
-  Europe.  There is an ARM Linux project with a web page at
-  <http://www.arm.linux.org.uk/>.
-
-SuperH processors
-CONFIG_SUPERH
-  The SuperH is a RISC processor targeted for use in embedded systems
-  and consumer electronics; it was also used in the Sega Dreamcast
-  gaming console.  The SuperH port has a home page at
-  <http://www.sh-linux.org/>.
-
-IA64 processors, including Intel Itanium
-CONFIG_IA64
-  The Itanium is Intel's 64-bit successor to the 32-bit X86 line.  As
-  of early 2001 it is not yet in widespread production use.  The Linux
-  IA-64 project has a home page at <http://www.linuxia64.org/>.
-
-HP PA-RISC processor
-CONFIG_PARISC
-  The PA-RISC microprocessor is a RISC chip designed by
-  Hewlett-Packard and used in their line of workstations.  The PA-RISC
-  Linux project has a home page at <www.parisc-linux.org>.
-
-IBM System/390
-CONFIG_S390
-  Linux now runs on the venerable System/390 mainframe from IBM, in a
-  guest partition under VM.  In fact, over 40,000 simultaneous Linux
-  images have been run on a single mainframe!  The S390 Linux project
-  has a home page at <http://linux.s390.org/>.
-
-Axis Communications ETRAX 100LX embedded network CPU
-CONFIG_CRIS
-  Linux has been ported to run on the Axis Communications ETRAX 100LX
-  CPU and the single-board computers built around it, targeted for
-  network and embedded applications.  For more information see the
-  Axis Communication site, <http://developer.axis.com/>.
-
-Multiquad support for NUMA systems
-CONFIG_MULTIQUAD
-  This option is used for getting Linux to run on a (IBM/Sequent) NUMA 
-  multiquad box. This changes the way that processors are bootstrapped,
-  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-  You will need a new lynxer.elf file to flash your firmware with - send
-  email to Martin.Bligh@us.ibm.com
-
-IO-APIC Support on Uniprocessors
-CONFIG_X86_UP_IOAPIC
-  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
-  SMP-capable replacement for PC-style interrupt controllers. Most
-  SMP systems and a small number of uniprocessor systems have one.
-  If you have a single-CPU system with an IO-APIC, you can say Y here
-  to use it. If you say Y here even though your machine doesn't have
-  an IO-APIC, then the kernel will still run with no slowdown at all.
-
-  If you have a system with several CPUs, you do not need to say Y
-  here: the IO-APIC will be used automatically.
-
-Local APIC Support on Uniprocessors
-CONFIG_X86_UP_APIC
-  A local APIC (Advanced Programmable Interrupt Controller) is an
-  integrated interrupt controller in the CPU. If you have a single-CPU
-  system which has a processor with a local APIC, you can say Y here to
-  enable and use it. If you say Y here even though your machine doesn't
-  have a local APIC, then the kernel will still run with no slowdown at
-  all. The local APIC supports CPU-generated self-interrupts (timer,
-  performance counters), and the NMI watchdog which detects hard lockups.
-
-  If you have a system with several CPUs, you do not need to say Y
-  here: the local APIC will be used automatically.
-
-Kernel math emulation
-CONFIG_MATH_EMULATION
-  Linux can emulate a math coprocessor (used for floating point
-  operations) if you don't have one. 486DX and Pentium processors have
-  a math coprocessor built in, 486SX and 386 do not, unless you added
-  a 487DX or 387, respectively. (The messages during boot time can
-  give you some hints here ["man dmesg"].) Everyone needs either a
-  coprocessor or this emulation.
-
-  If you don't have a math coprocessor, you need to say Y here; if you
-  say Y here even though you have a coprocessor, the coprocessor will
-  be used nevertheless. (This behavior can be changed with the kernel
-  command line option "no387", which comes handy if your coprocessor
-  is broken. Try "man bootparam" or see the documentation of your boot
-  loader (lilo or loadlin) about how to pass options to the kernel at
-  boot time.) This means that it is a good idea to say Y here if you
-  intend to use this kernel on different machines.
-
-  More information about the internals of the Linux math coprocessor
-  emulation can be found in <file:arch/i386/math-emu/README>.
-
-  If you are not sure, say Y; apart from resulting in a 66 KB bigger
-  kernel, it won't hurt.
-
-Timer and CPU usage LEDs
-CONFIG_LEDS
-  If you say Y here, the LEDs on your machine will be used
-  to provide useful information about your current system status.
-
-  If you are compiling a kernel for a NetWinder or EBSA-285, you will
-  be able to select which LEDs are active using the options below. If
-  you are compiling a kernel for the EBSA-110 or the LART however, the
-  red LED will simply flash regularly to indicate that the system is
-  still functional. It is safe to say Y here if you have a CATS
-  system, but the driver will do nothing.
-
-Timer LED
-CONFIG_LEDS_TIMER
-  If you say Y here, one of the system LEDs (the green one on the
-  NetWinder, the amber one on the EBSA285, or the red one on the LART)
-  will flash regularly to indicate that the system is still
-  operational. This is mainly useful to kernel hackers who are
-  debugging unstable kernels.
-
-  The LART uses the same LED for both Timer LED and CPU usage LED
-  functions. You may choose to use both, but the Timer LED function
-  will overrule the CPU usage LED.
-
-CPU usage LED
-CONFIG_LEDS_CPU
-  If you say Y here, the red LED will be used to give a good real
-  time indication of CPU usage, by lighting whenever the idle task
-  is not currently executing.
-
-  The LART uses the same LED for both Timer LED and CPU usage LED
-  functions. You may choose to use both, but the Timer LED function
-  will overrule the CPU usage LED.
-
-Kernel FP software completion
-CONFIG_MATHEMU
-  This option is required for IEEE compliant floating point arithmetic
-  on the Alpha. The only time you would ever not say Y is to say M in
-  order to debug the code. Say Y unless you know what you are doing.
-
-# Choice: himem
-High Memory support
-CONFIG_NOHIGHMEM
-  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
-  However, the address space of 32-bit x86 processors is only 4
-  Gigabytes large. That means that, if you have a large amount of
-  physical memory, not all of it can be "permanently mapped" by the
-  kernel. The physical memory that's not permanently mapped is called
-  "high memory".
-
-  If you are compiling a kernel which will never run on a machine with
-  more than 1 Gigabyte total physical RAM, answer "off" here (default
-  choice and suitable for most users). This will result in a "3GB/1GB"
-  split: 3GB are mapped so that each process sees a 3GB virtual memory
-  space and the remaining part of the 4GB virtual memory space is used
-  by the kernel to permanently map as much physical memory as
-  possible.
-
-  If the machine has between 1 and 4 Gigabytes physical RAM, then
-  answer "4GB" here.
-
-  If more than 4 Gigabytes is used then answer "64GB" here. This
-  selection turns Intel PAE (Physical Address Extension) mode on.
-  PAE implements 3-level paging on IA32 processors. PAE is fully
-  supported by Linux, PAE mode is implemented on all recent Intel
-  processors (Pentium Pro and better). NOTE: If you say "64GB" here,
-  then the kernel will not boot on CPUs that don't support PAE!
-
-  The actual amount of total physical memory will either be
-  auto detected or can be forced by using a kernel command line option
-  such as "mem=256M". (Try "man bootparam" or see the documentation of
-  your boot loader (lilo or loadlin) about how to pass options to the
-  kernel at boot time.)
-
-  If unsure, say "off".
-
-4GB
-CONFIG_HIGHMEM4G
-  Select this if you have a 32-bit processor and between 1 and 4
-  gigabytes of physical RAM.
-
-64GB
-CONFIG_HIGHMEM64G
-  Select this if you have a 32-bit processor and more than 4
-  gigabytes of physical RAM.
-
-Normal PC floppy disk support
-CONFIG_BLK_DEV_FD
-  If you want to use the floppy disk drive(s) of your PC under Linux,
-  say Y. Information about this driver, especially important for IBM
-  Thinkpad users, is contained in <file:Documentation/floppy.txt>.
-  That file also contains the location of the Floppy driver FAQ as
-  well as location of the fdutils package used to configure additional
-  parameters of the driver at run time.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called floppy.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-iSeries Virtual I/O Disk Support
-CONFIG_VIODASD
-  If you are running on an iSeries system and you want to use
-  virtual disks created and managed by OS/400, say Y.
-
-iSeries Virtual I/O Disk IDE Emulation
-CONFIG_VIODASD_IDE
-  This causes the iSeries virtual disks to look like IDE disks.
-  If you have programs or utilities that only support certain
-  kinds of disks, this option will cause iSeries virtual disks
-  to pretend to be IDE disks, which may satisfy the program.
-
-Support for PowerMac floppy
-CONFIG_MAC_FLOPPY
-  If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
-  floppy controller, say Y here. Most commonly found in PowerMacs.
-
-RAM disk support
-CONFIG_BLK_DEV_RAM
-  Saying Y here will allow you to use a portion of your RAM memory as
-  a block device, so that you can make file systems on it, read and
-  write to it and do all the other things that you can do with normal
-  block devices (such as hard drives). It is usually used to load and
-  store a copy of a minimal root file system off of a floppy into RAM
-  during the initial install of Linux.
-
-  Note that the kernel command line option "ramdisk=XX" is now
-  obsolete. For details, read <file:Documentation/ramdisk.txt>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M and read <file:Documentation/modules.txt>. The module will be
-  called rd.o.
-
-  Most normal users won't need the RAM disk functionality, and can
-  thus say N here.
-
-Default RAM disk size
-CONFIG_BLK_DEV_RAM_SIZE
-  The default value is 4096. Only change this if you know what are
-  you doing. If you are using IBM S/390, then set this to 8192.
-
-Initial RAM disk (initrd) support
-CONFIG_BLK_DEV_INITRD
-  The initial RAM disk is a RAM disk that is loaded by the boot loader
-  (loadlin or lilo) and that is mounted as root before the normal boot
-  procedure. It is typically used to load modules needed to mount the
-  "real" root file system, etc. See <file:Documentation/initrd.txt>
-  for details.
-
-Loopback device support
-CONFIG_BLK_DEV_LOOP
-  Saying Y here will allow you to use a regular file as a block
-  device; you can then create a file system on that block device and
-  mount it just as you would mount other block devices such as hard
-  drive partitions, CD-ROM drives or floppy drives. The loop devices
-  are block special device files with major number 7 and typically
-  called /dev/loop0, /dev/loop1 etc.
-
-  This is useful if you want to check an ISO 9660 file system before
-  burning the CD, or if you want to use floppy images without first
-  writing them to floppy. Furthermore, some Linux distributions avoid
-  the need for a dedicated Linux partition by keeping their complete
-  root file system inside a DOS FAT file using this loop device
-  driver.
-
-  The loop device driver can also be used to "hide" a file system in a
-  disk partition, floppy, or regular file, either using encryption
-  (scrambling the data) or steganography (hiding the data in the low
-  bits of, say, a sound file). This is also safe if the file resides
-  on a remote file server. If you want to do this, you will first have
-  to acquire and install a kernel patch from
-  <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
-  say Y to this option.
-
-  Note that alternative ways to use encrypted file systems are
-  provided by the cfs package, which can be gotten from
-  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
-  package, available at <http://tcfs.dia.unisa.it/>. You do not need
-  to say Y here if you want to use one of these. However, using cfs
-  requires saying Y to "NFS file system support" below while using
-  tcfs requires applying a kernel patch. An alternative steganography
-  solution is provided by StegFS, also available from
-  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
-
-  To use the loop device, you need the losetup utility and a recent
-  version of the mount program, both contained in the util-linux
-  package. The location and current version number of util-linux is
-  contained in the file <file:Documentation/Changes>.
-
-  Note that this loop device has nothing to do with the loopback
-  device used for network connections from the machine to itself.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. The module
-  will be called loop.o.
-
-  Most users will answer N here.
-
-Network block device support
-CONFIG_BLK_DEV_NBD
-  Saying Y here will allow your computer to be a client for network
-  block devices, i.e. it will be able to use block devices exported by
-  servers (mount file systems on them etc.). Communication between
-  client and server works over TCP/IP networking, but to the client
-  program this is hidden: it looks like a regular local file access to
-  a block device special file such as /dev/nd0.
-
-  Network block devices also allows you to run a block-device in
-  userland (making server and client physically the same computer,
-  communicating using the loopback network device).
-
-  Read <file:Documentation/nbd.txt> for more information, especially
-  about where to find the server code, which runs in user space and
-  does not need special kernel support.
-
-  Note that this has nothing to do with the network file systems NFS
-  or Coda; you can say N here even if you intend to use NFS or Coda.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. The module
-  will be called nbd.o.
-
-  If unsure, say N.
-
-ATA/IDE/MFM/RLL support
-CONFIG_IDE
-  If you say Y here, your kernel will be able to manage low cost mass
-  storage units such as ATA/(E)IDE and ATAPI units. The most common
-  cases are IDE hard drives and ATAPI CD-ROM drives.
-
-  If your system is pure SCSI and doesn't use these interfaces, you
-  can say N here.
-
-  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
-  for mass storage units such as hard disks. It was designed by
-  Western Digital and Compaq Computer in 1984. It was then named
-  ST506. Quite a number of disks use the IDE interface.
-
-  AT Attachment (ATA) is the superset of the IDE specifications.
-  ST506 was also called ATA-1.
-
-  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
-  ATA-3. It provides support for larger disks (up to 8.4GB by means of
-  the LBA standard), more disks (4 instead of 2) and for other mass
-  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
-  ATA-4 and provides faster (and more CPU friendly) transfer modes
-  than previous PIO (Programmed processor Input/Output) from previous
-  ATA/IDE standards by means of fast DMA controllers.
-
-  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
-  CD-ROM drives, similar in many respects to the SCSI protocol.
-
-  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
-  designed in order to prevent data corruption and disk crash by
-  detecting pre hardware failure conditions (heat, access time, and
-  the like...). Disks built since June 1995 may follow this standard.
-  The kernel itself don't manage this; however there are quite a
-  number of user programs such as smart that can query the status of
-  SMART parameters disk.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. The module
-  will be called ide.o.
-
-  For further information, please read <file:Documentation/ide.txt>.
-
-  If unsure, say Y.
-
-Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
-CONFIG_BLK_DEV_IDE
-  If you say Y here, you will use the full-featured IDE driver to
-  control up to ten ATA/IDE interfaces, each being able to serve a
-  "master" and a "slave" device, for a total of up to twenty ATA/IDE
-  disk/cdrom/tape/floppy drives.
-
-  Useful information about large (>540 MB) IDE disks, multiple
-  interfaces, what to do if ATA/IDE devices are not automatically
-  detected, sound card ATA/IDE ports, module support, and other
-  topics, is contained in <file:Documentation/ide.txt>. For detailed
-  information about hard drives, consult the Disk-HOWTO and the
-  Multi-Disk-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  To fine-tune ATA/IDE drive/interface parameters for improved
-  performance, look for the hdparm package at
-  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/ide.txt>. The module will be called ide-mod.o.
-  Do not compile this driver as a module if your root file system (the
-  one containing the directory /) is located on an IDE device.
-
-  If you have one or more IDE drives, say Y or M here. If your system
-  has no IDE drives, or if memory requirements are really tight, you
-  could say N here, and select the "Old hard disk driver" below
-  instead to save about 13 KB of memory in the kernel.
-
-Old hard disk (MFM/RLL/IDE) driver
-CONFIG_BLK_DEV_HD_ONLY
-  There are two drivers for MFM/RLL/IDE hard disks. Most people use
-  the newer enhanced driver, but this old one is still around for two
-  reasons. Some older systems have strange timing problems and seem to
-  work only with the old driver (which itself does not work with some
-  newer systems). The other reason is that the old driver is smaller,
-  since it lacks the enhanced functionality of the new one. This makes
-  it a good choice for systems with very tight memory restrictions, or
-  for systems with only older MFM/RLL/ESDI drives. Choosing the old
-  driver can save 13 KB or so of kernel memory.
-
-  If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
-  instead of this one. For more detailed information, read the
-  Disk-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Use old disk-only driver on primary interface
-CONFIG_BLK_DEV_HD_IDE
-  There are two drivers for MFM/RLL/IDE disks.  Most people use just
-  the new enhanced driver by itself.  This option however installs the
-  old hard disk driver to control the primary IDE/disk interface in
-  the system, leaving the new enhanced IDE driver to take care of only
-  the 2nd/3rd/4th IDE interfaces.  Doing this will prevent you from
-  having an IDE/ATAPI CD-ROM or tape drive connected to the primary
-  IDE interface.  Choosing this option may be useful for older systems
-  which have MFM/RLL/ESDI controller+drives at the primary port
-  address (0x1f0), along with IDE drives at the secondary/3rd/4th port
-  addresses.
-
-  Normally, just say N here; you will then use the new driver for all
-  4 interfaces.
-
-Include IDE/ATA-2 DISK support
-CONFIG_BLK_DEV_IDEDISK
-  This will include enhanced support for MFM/RLL/IDE hard disks.  If
-  you have a MFM/RLL/IDE disk, and there is no special reason to use
-  the old hard disk driver instead, say Y.  If you have an SCSI-only
-  system, you can say N here.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ide-disk.o.  Do not compile this driver as a module
-  if your root file system (the one containing the directory /) is
-  located on the IDE disk. If unsure, say Y.
-
-Use multi-mode by default
-CONFIG_IDEDISK_MULTI_MODE
-  If you get this error, try to say Y here:
-
-  hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
-  hda: set_multmode: error=0x04 { DriveStatusError }
-
-  If in doubt, say N.
-
-PCMCIA IDE support
-CONFIG_BLK_DEV_IDECS
-  Support for outboard IDE disks, tape drives, and CD-ROM drives
-  connected through a  PCMCIA card.
-
-Include IDE/ATAPI CD-ROM support
-CONFIG_BLK_DEV_IDECD
-  If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
-  a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
-  SCSI protocol. Most new CD-ROM drives use ATAPI, including the
-  NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
-  double(2X) or better speed drives.
-
-  If you say Y here, the CD-ROM drive will be identified at boot time
-  along with other IDE devices, as "hdb" or "hdc", or something
-  similar (check the boot messages with dmesg). If this is your only
-  CD-ROM drive, you can say N to all other CD-ROM options, but be sure
-  to say Y or M to "ISO 9660 CD-ROM file system support".
-
-  Note that older versions of LILO (LInux LOader) cannot properly deal
-  with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
-  <ftp://brun.dyndns.org/pub/linux/lilo/>.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ide-cd.o.
-
-Include IDE/ATAPI TAPE support
-CONFIG_BLK_DEV_IDETAPE
-  If you have an IDE tape drive using the ATAPI protocol, say Y.
-  ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
-  similar to the SCSI protocol.  If you have an SCSI tape drive
-  however, you can say N here.
-
-  You should also say Y if you have an OnStream DI-30 tape drive; this
-  will not work with the SCSI protocol, until there is support for the
-  SC-30 and SC-50 versions.
-
-  If you say Y here, the tape drive will be identified at boot time
-  along with other IDE devices, as "hdb" or "hdc", or something
-  similar, and will be mapped to a character device such as "ht0"
-  (check the boot messages with dmesg).  Be sure to consult the
-  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
-  for usage information.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ide-tape.o.
-
-Include IDE/ATAPI FLOPPY support
-CONFIG_BLK_DEV_IDEFLOPPY
-  If you have an IDE floppy drive which uses the ATAPI protocol,
-  answer Y.  ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
-  drives, similar to the SCSI protocol.
-
-  The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
-  this driver. For information about jumper settings and the question
-  of when a ZIP drive uses a partition table, see
-  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
-  (ATAPI PD-CD/CDR drives are not supported by this driver; support
-  for PD-CD/CDR drives is available if you answer Y to
-  "SCSI emulation support", below).
-
-  If you say Y here, the FLOPPY drive will be identified along with
-  other IDE devices, as "hdb" or "hdc", or something similar (check
-  the boot messages with dmesg).
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ide-floppy.o.
-
-SCSI emulation support
-CONFIG_BLK_DEV_IDESCSI
-  This will provide SCSI host adapter emulation for IDE ATAPI devices,
-  and will allow you to use a SCSI device driver instead of a native
-  ATAPI driver.
-
-  This is useful if you have an ATAPI device for which no native
-  driver has been written (for example, an ATAPI PD-CD or CDR drive);
-  you can then use this emulation together with an appropriate SCSI
-  device driver. In order to do this, say Y here and to "SCSI support"
-  and "SCSI generic support", below. You must then provide the kernel
-  command line "hdx=scsi" (try "man bootparam" or see the
-  documentation of your boot loader (lilo or loadlin) about how to
-  pass options to the kernel at boot time) for devices if you want the
-  native EIDE sub-drivers to skip over the native support, so that
-  this SCSI emulation can be used instead. This is required for use of
-  CD-RW's.
-
-  Note that this option does NOT allow you to attach SCSI devices to a
-  box that doesn't have a SCSI host adapter installed.
-
-  If both this SCSI emulation and native ATAPI support are compiled
-  into the kernel, the native support will be used.
-
-ISA-PNP EIDE support
-CONFIG_BLK_DEV_ISAPNP
-  If you have an ISA EIDE card that is PnP (Plug and Play) and
-  requires setup first before scanning for devices, say Y here.
-
-  If unsure, say N.
-
-CMD640 chipset bugfix/support
-CONFIG_BLK_DEV_CMD640
-  The CMD-Technologies CMD640 IDE chip is used on many common 486 and
-  Pentium motherboards, usually in combination with a "Neptune" or
-  "SiS" chipset. Unfortunately, it has a number of rather nasty
-  design flaws that can cause severe data corruption under many common
-  conditions. Say Y here to include code which tries to automatically
-  detect and correct the problems under Linux. This option also
-  enables access to the secondary IDE ports in some CMD640 based
-  systems.
-
-  This driver will work automatically in PCI based systems (most new
-  systems have PCI slots). But if your system uses VESA local bus
-  (VLB) instead of PCI, you must also supply a kernel boot parameter
-  to enable the CMD640 bugfix/support: "ide0=cmd640_vlb". (Try "man
-  bootparam" or see the documentation of your boot loader about how to
-  pass options to the kernel.)
-
-  The CMD640 chip is also used on add-in cards by Acculogic, and on
-  the "CSA-6400E PCI to IDE controller" that some people have. For
-  details, read <file:Documentation/ide.txt>.
-
-CMD640 enhanced support
-CONFIG_BLK_DEV_CMD640_ENHANCED
-  This option includes support for setting/autotuning PIO modes and
-  prefetch on CMD640 IDE interfaces.  For details, read
-  <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
-  and your BIOS does not already do this for you, then say Y here.
-  Otherwise say N.
-
-RZ1000 chipset bugfix/support
-CONFIG_BLK_DEV_RZ1000
-  The PC-Technologies RZ1000 IDE chip is used on many common 486 and
-  Pentium motherboards, usually along with the "Neptune" chipset.
-  Unfortunately, it has a rather nasty design flaw that can cause
-  severe data corruption under many conditions. Say Y here to include
-  code which automatically detects and corrects the problem under
-  Linux. This may slow disk throughput by a few percent, but at least
-  things will operate 100% reliably.
-
-Generic PCI IDE chipset support
-CONFIG_BLK_DEV_IDEPCI
-  Say Y here for PCI systems which use IDE drive(s).
-  This option helps the IDE driver to automatically detect and
-  configure all PCI-based IDE interfaces in your system.
-
-Support for sharing PCI IDE interrupts
-CONFIG_IDEPCI_SHARE_IRQ
-  Some ATA/IDE chipsets have hardware support which allows for
-  sharing a single IRQ with other cards. To enable support for
-  this in the ATA/IDE driver, say Y here.
-
-  It is safe to say Y to this question, in most cases.
-  If unsure, say N.
-
-Generic PCI bus-master DMA support
-CONFIG_BLK_DEV_IDEDMA_PCI
-  If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
-  is capable of bus-master DMA operation (most Pentium PCI systems),
-  you will want to say Y here to reduce CPU overhead. You can then use
-  the "hdparm" utility to enable DMA for drives for which it was not
-  enabled automatically. By default, DMA is not enabled automatically
-  for these drives, but you can change that by saying Y to the
-  following question "Use DMA by default when available". You can get
-  the latest version of the hdparm utility from
-  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
-  Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
-  and the file <file:Documentation/ide.txt> for more information.
-
-  It is safe to say Y to this question.
-
-Good-Bad DMA Model-Firmware (WIP)
-CONFIG_IDEDMA_NEW_DRIVE_LISTINGS
-  If you say Y here, the model and firmware revision of your drive
-  will be compared against a blacklist of buggy drives that claim to
-  be (U)DMA capable but aren't. This is a blanket on/off test with no
-  speed limit options.
-
-  Straight GNU GCC 2.7.3/2.8.X compilers are known to be safe;
-  whereas, many versions of EGCS have a problem and miscompile if you
-  say Y here.
-
-  If in doubt, say N.
-
-Attempt to HACK around Chipsets that TIMEOUT (WIP)
-CONFIG_BLK_DEV_IDEDMA_TIMEOUT
-  If you say Y here, this is a NASTY UGLY HACK!
-
-  We have to issue an abort and requeue the request DMA engine got
-  turned off by a goofy ASIC, and we have to clean up the mess, and
-  here is as good as any.  Do it globally for all chipsets.
-
-  If in doubt, say N.
-
-Boot off-board chipsets first support
-CONFIG_BLK_DEV_OFFBOARD
-  Normally, IDE controllers built into the motherboard (on-board
-  controllers) are assigned to ide0 and ide1 while those on add-in PCI
-  cards (off-board controllers) are relegated to ide2 and ide3.
-  Answering Y here will allow you to reverse the situation, with
-  off-board controllers on ide0/1 and on-board controllers on ide2/3.
-  This can improve the usability of some boot managers such as lilo
-  when booting from a drive on an off-board controller.
-
-  If you say Y here, and you actually want to reverse the device scan
-  order as explained above, you also need to issue the kernel command
-  line option "ide=reverse". (Try "man bootparam" or see the
-  documentation of your boot loader (lilo or loadlin) about how to
-  pass options to the kernel at boot time.)
-
-  Note that, if you do this, the order of the hd* devices will be
-  rearranged which may require modification of fstab and other files.
-
-  If in doubt, say N.
-
-Use PCI DMA by default when available
-CONFIG_IDEDMA_PCI_AUTO
-  Prior to kernel version 2.1.112, Linux used to automatically use
-  DMA for IDE drives and chipsets which support it. Due to concerns
-  about a couple of cases where buggy hardware may have caused damage,
-  the default is now to NOT use DMA automatically. To revert to the
-  previous behaviour, say Y to this question.
-
-  If you suspect your hardware is at all flakey, say N here.
-  Do NOT email the IDE kernel people regarding this issue!
-
-  It is normally safe to answer Y to this question unless your
-  motherboard uses a VIA VP2 chipset, in which case you should say N.
-
-IGNORE word93 Validation BITS
-CONFIG_IDEDMA_IVB
-  There are unclear terms is ATA-4 and ATA-5 standards how certain
-  hardware (an 80c ribbon) should be detected. Different interpretations
-  of the standards have been released in hardware. This causes problems:
-  for example, a host with Ultra Mode 4 (or higher) will not run
-  in that mode with an 80c ribbon.
-
-  If you are experiencing compatibility or performance problems, you
-  MAY try to answering Y here. However, it does not necessarily solve
-  any of your problems, it could even cause more of them.
-
-  It is normally safe to answer Y; however, the default is N.
-
-ATA Work(s) In Progress (EXPERIMENTAL)
-CONFIG_IDEDMA_PCI_WIP
-  If you enable this you will be able to use and test highly
-  developmental projects. If you say N, the configurator will
-  simply skip those options.
-
-  It is SAFEST to say N to this question.
-
-Asyncronious DMA support (EXPERIMENTAL)
-CONFIG_BLK_DEV_ADMA
-  Please read the comments at the top of
-  <file:drivers/ide/ide-adma.c>.
-
-Pacific Digital A-DMA support (EXPERIMENTAL)
-CONFIG_BLK_DEV_PDC_ADMA
-  Please read the comments at the top of <file:drivers/ide/ide-pci.c>.
-
-3ware Hardware ATA-RAID support
-CONFIG_BLK_DEV_3W_XXXX_RAID
-  3ware is the only hardware ATA-Raid product in Linux to date.
-  This card is 2,4, or 8 channel master mode support only.
-  SCSI support required!!!
-
-  <http://www.3ware.com/>
-
-  Please read the comments at the top of
-  <file:drivers/scsi/3w-xxxx.c>.
-
-AEC62XX chipset support
-CONFIG_BLK_DEV_AEC62XX
-  This driver adds up to 4 more EIDE devices sharing a single
-  interrupt. This add-on card is a bootable PCI UDMA controller. In
-  order to get this card to initialize correctly in some cases, you
-  should say Y here, and preferably also to "Use DMA by default when
-  available".
-
-  The ATP850U/UF is an UltraDMA 33 chipset base.
-  The ATP860 is an UltraDMA 66 chipset base.
-  The ATP860M(acintosh) version is an UltraDMA 66 chipset base.
-
-  Please read the comments at the top of <file:drivers/ide/aec62xx.c>.
-  If you say Y here, then say Y to "Use DMA by default when available"
-  as well.
-
-AEC62XX Tuning support
-CONFIG_AEC62XX_TUNING
-  Please read the comments at the top of <file:drivers/ide/aec62xx.c>.
-  If unsure, say N.
-
-ALI M15x3 chipset support
-CONFIG_BLK_DEV_ALI15X3
-  This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
-  onboard chipsets.  It also tests for Simplex mode and enables
-  normal dual channel support.
-
-  If you say Y here, you also need to say Y to "Use DMA by default
-  when available", above.  Please read the comments at the top of
-  <file:drivers/ide/alim15x3.c>.
-
-  If unsure, say N.
-
-ALI M15x3 WDC support (DANGEROUS)
-CONFIG_WDC_ALI15X3
-  This allows for UltraDMA support for WDC drives that ignore CRC
-  checking. You are a fool for enabling this option, but there have
-  been requests. DO NOT COMPLAIN IF YOUR DRIVE HAS FS CORRUPTION, IF
-  YOU ENABLE THIS! No one will listen, just laugh for ignoring this
-  SERIOUS WARNING.
-
-  Using this option can allow WDC drives to run at ATA-4/5 transfer
-  rates with only an ATA-2 support structure.
-
-  SAY N!
-
-AMD Viper support
-CONFIG_BLK_DEV_AMD74XX
-  This driver ensures (U)DMA support for the AMD756/760 Viper
-  chipsets.
-
-  If you say Y here, you also need to say Y to "Use DMA by default
-  when available", above.
-  Please read the comments at the top of <file:drivers/ide/amd74xx.c>.
-
-  If unsure, say N.
-
-AMD Viper ATA-66 Override (WIP)
-CONFIG_AMD74XX_OVERRIDE
-  This option auto-forces the ata66 flag.
-  This effect can be also invoked by calling "idex=ata66"
-  If unsure, say N.
-
-CMD64X chipset support
-CONFIG_BLK_DEV_CMD64X
-  Say Y here if you have an IDE controller which uses any of these
-  chipsets: CMD643, CMD646, or CMD648.
-
-CY82C693 chipset support
-CONFIG_BLK_DEV_CY82C693
-  This driver adds detection and support for the CY82C693 chipset
-  used on Digital's PC-Alpha 164SX boards.
-
-  If you say Y here, you need to say Y to "Use DMA by default
-  when available" as well.
-
-Cyrix CS5530 MediaGX chipset support
-CONFIG_BLK_DEV_CS5530
-  Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
-  will automatically be detected and configured if found.
-
-  It is safe to say Y to this question.
-
-  People with SCSI-only systems should say N here. If unsure, say Y.
-
-HPT34X chipset support
-CONFIG_BLK_DEV_HPT34X
-  This driver adds up to 4 more EIDE devices sharing a single
-  interrupt. The HPT343 chipset in its current form is a non-bootable
-  controller; the HPT345/HPT363 chipset is a bootable (needs BIOS FIX)
-  PCI UDMA controllers. This driver requires dynamic tuning of the
-  chipset during the ide-probe at boot time. It is reported to support
-  DVD II drives, by the manufacturer.
-
-HPT34X AUTODMA support (WIP)
-CONFIG_HPT34X_AUTODMA
-  This is a dangerous thing to attempt currently! Please read the
-  comments at the top of <file:drivers/ide/hpt34x.c>.  If you say Y
-  here, then say Y to "Use DMA by default when available" as well.
-
-  If unsure, say N.
-
-HPT366 chipset support
-CONFIG_BLK_DEV_HPT366
-  HPT366 is an Ultra DMA chipset for ATA-66.
-  HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
-  HPT370 is an Ultra DMA chipset for ATA-100.
-
-  This driver adds up to 4 more EIDE devices sharing a single
-  interrupt.
-
-  The HPT366 chipset in its current form is bootable. One solution
-  for this problem are special LILO commands for redirecting the
-  reference to device 0x80. The other solution is to say Y to "Boot
-  off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
-  your mother board has the chipset natively mounted. Regardless one
-  should use the fore mentioned option and call at LILO or include
-  "ide=reverse" in LILO's append-line.
-
-  This driver requires dynamic tuning of the chipset during the
-  ide-probe at boot. It is reported to support DVD II drives, by the
-  manufacturer.
-
-NS87415 chipset support (EXPERIMENTAL)
-CONFIG_BLK_DEV_NS87415
-  This driver adds detection and support for the NS87415 chip
-  (used in SPARC64, among others).
-
-  Please read the comments at the top of <file:drivers/ide/ns87415.c>.
-
-OPTi 82C621 chipset enhanced support (EXPERIMENTAL)
-CONFIG_BLK_DEV_OPTI621
-  This is a driver for the OPTi 82C621 EIDE controller.
-  Please read the comments at the top of <file:drivers/ide/opti621.c>.
-
-ServerWorks OSB4/CSB5 chipset support
-CONFIG_BLK_DEV_SVWKS
-  This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
-  chipsets.
-
-Intel PIIXn chipsets support
-CONFIG_BLK_DEV_PIIX
-  This driver adds PIO mode setting and tuning for all PIIX IDE
-  controllers by Intel.  Since the BIOS can sometimes improperly tune
-  PIO 0-4 mode settings, this allows dynamic tuning of the chipset
-  via the standard end-user tool 'hdparm'.
-
-  Please read the comments at the top of <file:drivers/ide/piix.c>.
-
-  If you say Y here, you should also say Y to "PIIXn Tuning support",
-  below.
-
-  If unsure, say N.
-
-PIIXn Tuning support
-CONFIG_PIIX_TUNING
-  This driver extension adds DMA mode setting and tuning for all PIIX
-  IDE controllers by Intel. Since the BIOS can sometimes improperly
-  set up the device/adapter combination and speed limits, it has
-  become a necessity to back/forward speed devices as needed.
-
-  Case 430HX/440FX PIIX3 need speed limits to reduce UDMA to DMA mode
-  2 if the BIOS can not perform this task at initialization.
-
-  If unsure, say N.
-
-PROMISE PDC20246/PDC20262/PDC20265/PDC20267/PDC20268 support
-CONFIG_BLK_DEV_PDC202XX
-  Promise Ultra33 or PDC20246
-  Promise Ultra66 or PDC20262
-  Promise Ultra100 or PDC20265/PDC20267/PDC20268
-
-  This driver adds up to 4 more EIDE devices sharing a single
-  interrupt. This add-on card is a bootable PCI UDMA controller. Since
-  multiple cards can be installed and there are BIOS ROM problems that
-  happen if the BIOS revisions of all installed cards (three-max) do
-  not match, the driver attempts to do dynamic tuning of the chipset
-  at boot-time for max-speed.  Ultra33 BIOS 1.25 or newer is required
-  for more than one card. This card may require that you say Y to
-  "Special UDMA Feature".
-
-  If you say Y here, you need to say Y to "Use DMA by default when
-  available" as well.
-
-  Please read the comments at the top of
-  <file:drivers/ide/pdc202xx.c>.
-
-  If unsure, say N.
-
-Special UDMA Feature
-CONFIG_PDC202XX_BURST
-  This option causes the pdc202xx driver to enable UDMA modes on the
-  PDC202xx even when the PDC202xx BIOS has not done so.
-
-  It was originally designed for the PDC20246/Ultra33, whose BIOS will
-  only setup UDMA on the first two PDC20246 cards.  It has also been
-  used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
-  when the PDC20265 BIOS has been disabled (for faster boot up).
-
-  Please read the comments at the top of
-  <file:drivers/ide/pdc202xx.c>.
-
-  If unsure, say N.
-
-Special FastTrak Feature
-CONFIG_PDC202XX_FORCE
-  For FastTrak enable overriding BIOS.
-
-SiS5513 chipset support
-CONFIG_BLK_DEV_SIS5513
-  This driver ensures (U)DMA support for SIS5513 chipset based
-  mainboards. SiS620/530 UDMA mode 4, SiS5600/5597 UDMA mode 2, all
-  other DMA mode 2 limited chipsets are unsupported to date.
-
-  If you say Y here, you need to say Y to "Use DMA by default when
-  available" as well.
-
-  Please read the comments at the top of <file:drivers/ide/sis5513.c>.
-
-SLC90E66 chipset support
-CONFIG_BLK_DEV_SLC90E66
-  This driver ensures (U)DMA support for Victroy66 SouthBridges for
-  SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
-  The nice thing about it is that you can mix Ultra/DMA/PIO devices
-  and it will handle timing cycles.  Since this is an improved
-  look-a-like to the PIIX4 it should be a nice addition.
-
-  If you say Y here, you need to say Y to "Use DMA by default when
-  available" as well.
-
-  Please read the comments at the top of
-  <file:drivers/ide/slc90e66.c>.
-
-Winbond SL82c105 support
-CONFIG_BLK_DEV_SL82C105
-  If you have a Winbond SL82c105 IDE controller, say Y here to enable
-  special configuration for this chip. This is common on various CHRP
-  motherboards, but could be used elsewhere. If in doubt, say Y.
-
-Tekram TRM290 chipset support
-CONFIG_BLK_DEV_TRM290
-  This driver adds support for bus master DMA transfers
-  using the Tekram TRM290 PCI IDE chip. Volunteers are
-  needed for further tweaking and development.
-  Please read the comments at the top of <file:drivers/ide/trm290.c>.
-
-VIA82CXXX chipset support
-CONFIG_BLK_DEV_VIA82CXXX
-  This allows you to configure your chipset for a better use while
-  running PIO/(U)DMA, it will allow you to enable efficiently the
-  second channel dma usage, as it may not be set by BIOS.  It will try
-  to set fifo configuration at its best.  It will allow you to get
-  information from /proc/ide/via provided you enabled "/proc file
-  system" support.
-
-  Please read the comments at the top of
-  <file:drivers/ide/via82cxxx.c>.
-
-  If you say Y here, then say Y to "Use DMA by default when available"
-  as well.
-
-  If unsure, say N.
-
-RapIDE interface support
-CONFIG_BLK_DEV_IDE_RAPIDE
-  Say Y here if you want to support the Yellowstone RapIDE controller
-  manufactured for use with Acorn computers.
-
-Other IDE chipset support
-CONFIG_IDE_CHIPSETS
-  Say Y here if you want to include enhanced support for various IDE
-  interface chipsets used on motherboards and add-on cards. You can
-  then pick your particular IDE chip from among the following options.
-  This enhanced support may be necessary for Linux to be able to
-  access the 3rd/4th drives in some systems. It may also enable
-  setting of higher speed I/O rates to improve system performance with
-  these chipsets. Most of these also require special kernel boot
-  parameters to actually turn on the support at runtime; you can find
-  a list of these in the file <file:Documentation/ide.txt>.
-
-  People with SCSI-only systems can say N here.
-
-Generic 4 drives/port support
-CONFIG_BLK_DEV_4DRIVES
-  Certain older chipsets, including the Tekram 690CD, use a single set
-  of I/O ports at 0x1f0 to control up to four drives, instead of the
-  customary two drives per port. Support for this can be enabled at
-  runtime using the "ide0=four" kernel boot parameter if you say Y
-  here.
-
-ALI M14xx support
-CONFIG_BLK_DEV_ALI14XX
-  This driver is enabled at runtime using the "ide0=ali14xx" kernel
-  boot parameter.  It enables support for the secondary IDE interface
-  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
-  I/O speeds to be set as well.  See the files
-  <file:Documentation/ide.txt> and <file:drivers/ide/ali14xx.c> for
-  more info.
-
-DTC-2278 support
-CONFIG_BLK_DEV_DTC2278
-  This driver is enabled at runtime using the "ide0=dtc2278" kernel
-  boot parameter. It enables support for the secondary IDE interface
-  of the DTC-2278 card, and permits faster I/O speeds to be set as
-  well. See the <file:Documentation/ide.txt> and
-  <file:drivers/ide/dtc2278.c> files for more info.
-
-Holtek HT6560B support
-CONFIG_BLK_DEV_HT6560B
-  This driver is enabled at runtime using the "ide0=ht6560b" kernel
-  boot parameter. It enables support for the secondary IDE interface
-  of the Holtek card, and permits faster I/O speeds to be set as well.
-  See the <file:Documentation/ide.txt> and
-  <file:drivers/ide/ht6560b.c> files for more info.
-
-PROMISE DC4030 support (EXPERIMENTAL)
-CONFIG_BLK_DEV_PDC4030
-  This driver provides support for the secondary IDE interface and
-  cache of Promise IDE chipsets, e.g. DC4030 and DC5030.  This driver
-  is known to incur timeouts/retries during heavy I/O to drives
-  attached to the secondary interface.  CD-ROM and TAPE devices are
-  not supported yet.  This driver is enabled at runtime using the
-  "ide0=dc4030" kernel boot parameter.  See the
-  <file:Documentation/ide.txt> and <file:drivers/ide/pdc4030.c> files
-  for more info.
-
-QDI QD65XX support
-CONFIG_BLK_DEV_QD65XX
-  This driver is enabled at runtime using the "ide0=qd65xx" kernel
-  boot parameter.  It permits faster I/O speeds to be set.  See the
-  <file:Documentation/ide.txt> and <file:drivers/ide/qd65xx.c> for
-  more info.
-
-UMC 8672 support
-CONFIG_BLK_DEV_UMC8672
-  This driver is enabled at runtime using the "ide0=umc8672" kernel
-  boot parameter. It enables support for the secondary IDE interface
-  of the UMC-8672, and permits faster I/O speeds to be set as well.
-  See the files <file:Documentation/ide.txt> and
-  <file:drivers/ide/umc8672.c> for more info.
-
-Amiga Gayle IDE interface support
-CONFIG_BLK_DEV_GAYLE
-  This is the IDE driver for the builtin IDE interface on some Amiga
-  models. It supports both the `A1200 style' (used in A600 and A1200)
-  and `A4000 style' (used in A4000 and A4000T) of the Gayle IDE
-  interface. Say Y if you have such an Amiga model and want to use IDE
-  devices (hard disks, CD-ROM drives, etc.) that are connected to the
-  builtin IDE interface.
-
-Falcon IDE interface support
-CONFIG_BLK_DEV_FALCON_IDE
-  This is the IDE driver for the builtin IDE interface on the Atari
-  Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
-  disks, CD-ROM drives, etc.) that are connected to the builtin IDE
-  interface.
-
-Amiga Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)
-CONFIG_BLK_DEV_BUDDHA
-  This is the IDE driver for the IDE interfaces on the Buddha, 
-  Catweasel and X-Surf expansion boards.  It supports up to two interfaces 
-  on the Buddha, three on the Catweasel and two on the X-Surf.
-
-  Say Y if you have a Buddha or Catweasel expansion board and want to
-  use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
-  to one of its IDE interfaces.
-
-Amiga IDE Doubler support (EXPERIMENTAL)
-CONFIG_BLK_DEV_IDEDOUBLER
-  This driver provides support for the so-called `IDE doublers' (made
-  by various manufacturers, e.g. Eyetech) that can be connected to the
-  builtin IDE interface of some Amiga models. Using such an IDE
-  doubler, you can connect up to four instead of two IDE devices on
-  the Amiga's builtin IDE interface.
-
-  Note that the normal Amiga Gayle IDE driver may not work correctly
-  if you have an IDE doubler and don't enable this driver!
-
-  Say Y if you have an IDE doubler.  The driver is enabled at kernel
-  runtime using the "ide=doubler" kernel boot parameter.
-
-WarpEngine SCSI support
-CONFIG_WARPENGINE_SCSI
-  Support for MacroSystem Development's WarpEngine Amiga SCSI-2
-  controller. Info at
-  <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>.
-
-Builtin PowerMac IDE support
-CONFIG_BLK_DEV_IDE_PMAC
-  This driver provides support for the built-in IDE controller on
-  most of the recent Apple Power Macintoshes and PowerBooks.
-  If unsure, say Y.
-
-PowerMac IDE DMA support
-CONFIG_BLK_DEV_IDEDMA_PMAC
-  This option allows the driver for the built-in IDE controller on
-  Power Macintoshes and PowerBooks to use DMA (direct memory access)
-  to transfer data to and from memory.  Saying Y is safe and improves
-  performance.
-
-Use DMA by default
-CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
-  This option allows the driver for the built-in IDE controller on
-  Power Macintoshes and PowerBooks to use DMA automatically, without
-  it having to be explicitly enabled.  This option is provided because
-  of concerns about a couple of cases where using DMA on buggy PC
-  hardware may have caused damage.  Saying Y should be safe on all
-  Apple machines.
-
-Macintosh Quadra/Powerbook IDE interface support
-CONFIG_BLK_DEV_MAC_IDE
-  This is the IDE driver for the builtin IDE interface on some m68k
-  Macintosh models. It supports both the `Quadra style' (used in
-  Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
-  (used in the Powerbook 150 and 190 models) IDE interface.
-
-  Say Y if you have such an Macintosh model and want to use IDE
-  devices (hard disks, CD-ROM drives, etc.) that are connected to the
-  builtin IDE interface.
-
-ICS IDE interface support
-CONFIG_BLK_DEV_IDE_ICSIDE
-  On Acorn systems, say Y here if you wish to use the ICS IDE
-  interface card.  This is not required for ICS partition support.
-  If you are unsure, say N to this.
-
-ICS DMA support
-CONFIG_BLK_DEV_IDEDMA_ICS
-  Say Y here if you want to add DMA (Direct Memory Access) support to
-  the ICS IDE driver.
-
-Use ICS DMA by default
-CONFIG_IDEDMA_ICS_AUTO
-  Prior to kernel version 2.1.112, Linux used to automatically use
-  DMA for IDE drives and chipsets which support it. Due to concerns
-  about a couple of cases where buggy hardware may have caused damage,
-  the default is now to NOT use DMA automatically. To revert to the
-  previous behaviour, say Y to this question.
-
-  If you suspect your hardware is at all flakey, say N here.
-  Do NOT email the IDE kernel people regarding this issue!
-
-XT hard disk support
-CONFIG_BLK_DEV_XD
-  Very old 8 bit hard disk controllers used in the IBM XT computer
-  will be supported if you say Y here.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. The module
-  will be called xd.o.
-
-  It's pretty unlikely that you have one of these: say N.
-
-PS/2 ESDI hard disk support
-CONFIG_BLK_DEV_PS2
-  Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
-  hard disk.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ps2esdi.o.
-
-Mylex DAC960/DAC1100 PCI RAID Controller support
-CONFIG_BLK_DEV_DAC960
-  This driver adds support for the Mylex DAC960, AcceleRAID, and
-  eXtremeRAID PCI RAID controllers.  See the file
-  <file:Documentation/README.DAC960> for further information about
-  this driver.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called DAC960.o.
-
-Parallel port IDE device support
-CONFIG_PARIDE
-  There are many external CD-ROM and disk devices that connect through
-  your computer's parallel port. Most of them are actually IDE devices
-  using a parallel port IDE adapter. This option enables the PARIDE
-  subsystem which contains drivers for many of these external drives.
-  Read <file:Documentation/paride.txt> for more information.
-
-  If you have said Y to the "Parallel-port support" configuration
-  option, you may share a single port between your printer and other
-  parallel port devices. Answer Y to build PARIDE support into your
-  kernel, or M if you would like to build it as a loadable module. If
-  your parallel port support is in a loadable module, you must build
-  PARIDE as a module. If you built PARIDE support into your kernel,
-  you may still build the individual protocol modules and high-level
-  drivers as loadable modules. If you build this support as a module,
-  it will be called paride.o.
-
-  To use the PARIDE support, you must say Y or M here and also to at
-  least one high-level driver (e.g. "Parallel port IDE disks",
-  "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
-  to at least one protocol driver (e.g. "ATEN EH-100 protocol",
-  "MicroSolutions backpack protocol", "DataStor Commuter protocol"
-  etc.).
-
-Parallel port IDE disks
-CONFIG_PARIDE_PD
-  This option enables the high-level driver for IDE-type disk devices
-  connected through a parallel port. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  parallel port IDE driver, otherwise you should answer M to build
-  it as a loadable module. The module will be called pd.o. You
-  must also have at least one parallel port protocol driver in your
-  system. Among the devices supported by this driver are the SyQuest
-  EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
-  hard drives from MicroSolutions.
-
-Parallel port ATAPI CD-ROMs
-CONFIG_PARIDE_PCD
-  This option enables the high-level driver for ATAPI CD-ROM devices
-  connected through a parallel port. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  parallel port ATAPI CD-ROM driver, otherwise you should answer M to
-  build it as a loadable module. The module will be called pcd.o. You
-  must also have at least one parallel port protocol driver in your
-  system. Among the devices supported by this driver are the
-  MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
-  you have such a CD-ROM drive, you should also say Y or M to "ISO
-  9660 CD-ROM file system support" below, because that's the file
-  system used on CD-ROMs.
-
-Parallel port ATAPI disks
-CONFIG_PARIDE_PF
-  This option enables the high-level driver for ATAPI disk devices
-  connected through a parallel port. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  parallel port ATAPI disk driver, otherwise you should answer M
-  to build it as a loadable module. The module will be called pf.o.
-  You must also have at least one parallel port protocol driver in
-  your system. Among the devices supported by this driver are the
-  MicroSolutions backpack PD/CD drive and the Imation Superdisk
-  LS-120 drive.
-
-Parallel port ATAPI tapes
-CONFIG_PARIDE_PT
-  This option enables the high-level driver for ATAPI tape devices
-  connected through a parallel port. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  parallel port ATAPI disk driver, otherwise you should answer M
-  to build it as a loadable module. The module will be called pt.o.
-  You must also have at least one parallel port protocol driver in
-  your system. Among the devices supported by this driver is the
-  parallel port version of the HP 5GB drive.
-
-Parallel port generic ATAPI devices
-CONFIG_PARIDE_PG
-  This option enables a special high-level driver for generic ATAPI
-  devices connected through a parallel port. The driver allows user
-  programs, such as cdrtools, to send ATAPI commands directly to a
-  device.
-
-  If you chose to build PARIDE support into your kernel, you may
-  answer Y here to build in the parallel port generic ATAPI driver,
-  otherwise you should answer M to build it as a loadable module. The
-  module will be called pg.o.
-
-  You must also have at least one parallel port protocol driver in
-  your system.
-
-  This driver implements an API loosely related to the generic SCSI
-  driver. See <file:include/linux/pg.h>. for details.
-
-  You can obtain the most recent version of cdrtools from
-  <ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/>. Versions 1.6.1a3 and
-  later fully support this driver.
-
-ATEN EH-100 protocol
-CONFIG_PARIDE_ATEN
-  This option enables support for the ATEN EH-100 parallel port IDE
-  protocol. This protocol is used in some inexpensive low performance
-  parallel port kits made in Hong Kong. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  protocol driver, otherwise you should answer M to build it as a
-  loadable module. The module will be called aten.o. You must also
-  have a high-level driver for the type of device that you want to
-  support.
-
-Micro Solutions BACKPACK Series 5 protocol
-CONFIG_PARIDE_BPCK
-  This option enables support for the Micro Solutions BACKPACK
-  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
-  before 1999 were Series 5) Series 5 drives will NOT always have the
-  Series noted on the bottom of the drive. Series 6 drivers will.
-
-  In other words, if your BACKPACK drive dosen't say "Series 6" on the
-  bottom, enable this option.
-
-  If you chose to build PARIDE support into your kernel, you may
-  answer Y here to build in the protocol driver, otherwise you should
-  answer M to build it as a loadable module.  The module will be
-  called bpck.o.  You must also have a high-level driver for the type
-  of device that you want to support.
-
-Micro Solutions BACKPACK Series 6 protocol
-CONFIG_PARIDE_BPCK6
-  This option enables support for the Micro Solutions BACKPACK
-  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
-  after 1999 were Series 6) Series 6 drives will have the Series noted
-  on the bottom of the drive.  Series 5 drivers don't always have it
-  noted.
-
-  In other words, if your BACKPACK drive says "Series 6" on the
-  bottom, enable this option.
-
-  If you chose to build PARIDE support into your kernel, you may
-  answer Y here to build in the protocol driver, otherwise you should
-  answer M to build it as a loadable module.  The module will be
-  called bpck6.o.  You must also have a high-level driver for the type
-  of device that you want to support.
-
-DataStor Commuter protocol
-CONFIG_PARIDE_COMM
-  This option enables support for the Commuter parallel port IDE
-  protocol from DataStor. If you chose to build PARIDE support
-  into your kernel, you may answer Y here to build in the protocol
-  driver, otherwise you should answer M to build it as a loadable
-  module. The module will be called comm.o. You must also have
-  a high-level driver for the type of device that you want to support.
-
-DataStor EP-2000 protocol
-CONFIG_PARIDE_DSTR
-  This option enables support for the EP-2000 parallel port IDE
-  protocol from DataStor. If you chose to build PARIDE support
-  into your kernel, you may answer Y here to build in the protocol
-  driver, otherwise you should answer M to build it as a loadable
-  module. The module will be called dstr.o. You must also have
-  a high-level driver for the type of device that you want to support.
-
-Shuttle EPAT/EPEZ protocol
-CONFIG_PARIDE_EPAT
-  This option enables support for the EPAT parallel port IDE protocol.
-  EPAT is a parallel port IDE adapter manufactured by Shuttle
-  Technology and widely used in devices from major vendors such as
-  Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
-  PARIDE support into your kernel, you may answer Y here to build in
-  the protocol driver, otherwise you should answer M to build it as a
-  loadable module. The module will be called epat.o. You must also
-  have a high-level driver for the type of device that you want to
-  support.
-
-Shuttle EPAT c7/c8 extension
-CONFIG_PARIDE_EPATC8
-  This option enables support for the newer Shuttle EP1284 (aka c7 and
-  c8) chip. You need this if you are using any recent Imation SuperDisk
-  (LS-120) drive.
-
-Shuttle EPIA protocol
-CONFIG_PARIDE_EPIA
-  This option enables support for the (obsolete) EPIA parallel port
-  IDE protocol from Shuttle Technology. This adapter can still be
-  found in some no-name kits. If you chose to build PARIDE support
-  into your kernel, you may answer Y here to build in the protocol
-  driver, otherwise you should answer M to build it as a loadable
-  module. The module will be called epia.o. You must also have a
-  high-level driver for the type of device that you want to support.
-
-FIT TD-2000 protocol
-CONFIG_PARIDE_FIT2
-  This option enables support for the TD-2000 parallel port IDE
-  protocol from Fidelity International Technology. This is a simple
-  (low speed) adapter that is used in some portable hard drives. If
-  you chose to build PARIDE support into your kernel, you may answer Y
-  here to build in the protocol driver, otherwise you should answer M
-  to build it as a loadable module. The module will be called ktti.o.
-  You must also have a high-level driver for the type of device that
-  you want to support.
-
-FIT TD-3000 protocol
-CONFIG_PARIDE_FIT3
-  This option enables support for the TD-3000 parallel port IDE
-  protocol from Fidelity International Technology. This protocol is
-  used in newer models of their portable disk, CD-ROM and PD/CD
-  devices. If you chose to build PARIDE support into your kernel, you
-  may answer Y here to build in the protocol driver, otherwise you
-  should answer M to build it as a loadable module. The module will be
-  called fit3.o. You must also have a high-level driver for the type
-  of device that you want to support.
-
-Freecom IQ ASIC-2 protocol
-CONFIG_PARIDE_FRIQ
-  This option enables support for version 2 of the Freecom IQ parallel
-  port IDE adapter.  This adapter is used by the Maxell Superdisk
-  drive.  If you chose to build PARIDE support into your kernel, you
-  may answer Y here to build in the protocol driver, otherwise you
-  should answer M to build it as a loadable module. The module will be
-  called friq.o. You must also have a high-level driver for the type
-  of device that you want to support.
-
-FreeCom power protocol
-CONFIG_PARIDE_FRPW
-  This option enables support for the Freecom power parallel port IDE
-  protocol. If you chose to build PARIDE support into your kernel, you
-  may answer Y here to build in the protocol driver, otherwise you
-  should answer M to build it as a loadable module. The module will be
-  called frpw.o. You must also have a high-level driver for the type
-  of device that you want to support.
-
-KingByte KBIC-951A/971A protocols
-CONFIG_PARIDE_KBIC
-  This option enables support for the KBIC-951A and KBIC-971A parallel
-  port IDE protocols from KingByte Information Corp. KingByte's
-  adapters appear in many no-name portable disk and CD-ROM products,
-  especially in Europe. If you chose to build PARIDE support into your
-  kernel, you may answer Y here to build in the protocol driver,
-  otherwise you should answer M to build it as a loadable module. The
-  module will be called kbic.o. You must also have a high-level driver
-  for the type of device that you want to support.
-
-KT PHd protocol
-CONFIG_PARIDE_KTTI
-  This option enables support for the "PHd" parallel port IDE protocol
-  from KT Technology. This is a simple (low speed) adapter that is
-  used in some 2.5" portable hard drives. If you chose to build PARIDE
-  support into your kernel, you may answer Y here to build in the
-  protocol driver, otherwise you should answer M to build it as a
-  loadable module. The module will be called ktti.o. You must also
-  have a high-level driver for the type of device that you want to
-  support.
-
-OnSpec 90c20 protocol
-CONFIG_PARIDE_ON20
-  This option enables support for the (obsolete) 90c20 parallel port
-  IDE protocol from OnSpec (often marketed under the ValuStore brand
-  name). If you chose to build PARIDE support into your kernel, you
-  may answer Y here to build in the protocol driver, otherwise you
-  should answer M to build it as a loadable module. The module will
-  be called on20.o. You must also have a high-level driver for the
-  type of device that you want to support.
-
-OnSpec 90c26 protocol
-CONFIG_PARIDE_ON26
-  This option enables support for the 90c26 parallel port IDE protocol
-  from OnSpec Electronics (often marketed under the ValuStore brand
-  name). If you chose to build PARIDE support into your kernel, you
-  may answer Y here to build in the protocol driver, otherwise you
-  should answer M to build it as a loadable module. The module will be
-  called on26.o. You must also have a high-level driver for the type
-  of device that you want to support.
-
-Logical Volume Manager (LVM) support
-CONFIG_BLK_DEV_LVM
-  This driver lets you combine several hard disks, hard disk
-  partitions, multiple devices or even loop devices (for evaluation
-  purposes) into a volume group.  Imagine a volume group as a kind of
-  virtual disk. Logical volumes, which can be thought of as virtual
-  partitions, can be created in the volume group.  You can resize
-  volume groups and logical volumes after creation time, corresponding
-  to new capacity needs.  Logical volumes are accessed as block
-  devices named /dev/VolumeGroupName/LogicalVolumeName.
-
-  For details see <file:Documentation/LVM-HOWTO>.  You will need
-  supporting user space software; location is in
-  <file:Documentation/Changes>.
-
-  If you want to compile this support as a module ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called lvm-mod.o.
-
-Multiple devices driver support (RAID and LVM)
-CONFIG_MD
-  Support multiple physical spindles through a single logical device.
-  Required for RAID and logical volume management (LVM).
-
-Multiple devices driver support
-CONFIG_BLK_DEV_MD
-  This driver lets you combine several hard disk partitions into one
-  logical block device. This can be used to simply append one
-  partition to another one or to combine several redundant hard disks
-  into a RAID1/4/5 device so as to provide protection against hard
-  disk failures. This is called "Software RAID" since the combining of
-  the partitions is done by the kernel. "Hardware RAID" means that the
-  combining is done by a dedicated controller; if you have such a
-  controller, you do not need to say Y here.
-
-  More information about Software RAID on Linux is contained in the
-  Software RAID mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. There you will also learn
-  where to get the supporting user space utilities raidtools.
-
-  If unsure, say N.
-
-Linear (append) mode
-CONFIG_MD_LINEAR
-  If you say Y here, then your multiple devices driver will be able to
-  use the so-called linear mode, i.e. it will combine the hard disk
-  partitions by simply appending one to the other.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called linear.o.
-
-  If unsure, say Y.
-
-RAID-0 (striping) mode
-CONFIG_MD_RAID0
-  If you say Y here, then your multiple devices driver will be able to
-  use the so-called raid0 mode, i.e. it will combine the hard disk
-  partitions into one logical device in such a fashion as to fill them
-  up evenly, one chunk here and one chunk there. This will increase
-  the throughput rate if the partitions reside on distinct disks.
-
-  Information about Software RAID on Linux is contained in the
-  Software-RAID mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. There you will also
-  learn where to get the supporting user space utilities raidtools.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called raid0.o.
-
-  If unsure, say Y.
-
-RAID-1 (mirroring) mode
-CONFIG_MD_RAID1
-  A RAID-1 set consists of several disk drives which are exact copies
-  of each other.  In the event of a mirror failure, the RAID driver
-  will continue to use the operational mirrors in the set, providing
-  an error free MD (multiple device) to the higher levels of the
-  kernel.  In a set with N drives, the available space is the capacity
-  of a single drive, and the set protects against a failure of (N - 1)
-  drives.
-
-  Information about Software RAID on Linux is contained in the
-  Software-RAID mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  There you will also
-  learn where to get the supporting user space utilities raidtools.
-
-  If you want to use such a RAID-1 set, say Y. This code is also
-  available as a module called raid1.o ( = code which can be inserted
-  in and removed from the running kernel whenever you want).  If you
-  want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  If unsure, say Y.
-
-RAID-4/RAID-5 mode
-CONFIG_MD_RAID5
-  A RAID-5 set of N drives with a capacity of C MB per drive provides
-  the capacity of C * (N - 1) MB, and protects against a failure
-  of a single drive. For a given sector (row) number, (N - 1) drives
-  contain data sectors, and one drive contains the parity protection.
-  For a RAID-4 set, the parity blocks are present on a single drive,
-  while a RAID-5 set distributes the parity across the drives in one
-  of the available parity distribution methods.
-
-  Information about Software RAID on Linux is contained in the
-  Software-RAID mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. There you will also
-  learn where to get the supporting user space utilities raidtools.
-
-  If you want to use such a RAID-4/RAID-5 set, say Y. This code is
-  also available as a module called raid5.o ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  If unsure, say Y.
-
-Multipath I/O support
-CONFIG_MD_MULTIPATH
-  Multipath-IO is the ability of certain devices to address the same
-  physical disk over multiple 'IO paths'. The code ensures that such
-  paths can be defined and handled at runtime, and ensures that a
-  transparent failover to the backup path(s) happens if a IO errors
-  arrives on the primary path.
-
-  If unsure, say N.
-
-Support for IDE Raid controllers
-CONFIG_BLK_DEV_ATARAID
-  Say Y or M if you have an IDE Raid controller and want linux
-  to use its softwareraid feature.  You must also select an
-  appropriate for your board low-level driver below.
-
-  Note, that Linux does not use the Raid implemetation in BIOS, and
-  the main purpose for this feature is to retain compatibility and
-  data integrity with other OS-es, using the same disk array. Linux
-  has its own Raid drivers, which you should use if you need better
-  performance.
-
-Support Promise software RAID (Fasttrak(tm))
-CONFIG_BLK_DEV_ATARAID_PDC
-  Say Y or M if you have a Promise Fasttrak (tm) Raid controller
-  and want linux to use the softwareraid feature of this card.
-  This driver uses /dev/ataraid/dXpY (X and Y numbers) as device
-  names.
-
-  If you choose to compile this as a module, the module will be called
-  pdcraid.o.
-
-Highpoint 370 software RAID
-CONFIG_BLK_DEV_ATARAID_HPT
-  Say Y or M if you have a Highpoint HPT 370 Raid controller
-  and want linux to use the softwareraid feature of this card.
-  This driver uses /dev/ataraid/dXpY (X and Y numbers) as device
-  names.
-
-  If you choose to compile this as a module, the module will be called
-  hptraid.o.
-
-Support for Acer PICA 1 chipset
-CONFIG_ACER_PICA_61
-  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-  kernel that runs on these, say Y here. For details about Linux on
-  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-  <http://oss.sgi.com/mips/>.
-
-Support for Algorithmics P4032 (EXPERIMENTAL)
-CONFIG_ALGOR_P4032
-  This is an evaluation board of the British company Algorithmics.
-  The board uses the R4300 and a R5230 CPUs.  For more information
-  about this board see <http://www.algor.co.uk/>.
-
-Support for BAGET MIPS series
-CONFIG_BAGET_MIPS
-  This enables support for the Baget, a Russian embedded system.  For
-  more details about the Baget see the Linux/MIPS FAQ on
-  <http://oss.sgi.com/mips/>.
-
-Baget AMD LANCE support
-CONFIG_BAGETLANCE
-  Say Y to enable kernel support for AMD Lance Ethernet cards on the
-  MIPS-32-based Baget embedded system.  This chipset is better known
-  via the NE2100 cards.
-
-Support for DECstations
-CONFIG_DECSTATION
-  This enables support for DEC's MIPS based workstations.  For details
-  see the Linux/MIPS FAQ on <http://oss.sgi.com/mips/> and the
-  DECstation porting pages on <http://decstation.unix-ag.org/>.
-
-  If you have one of the following DECstation Models you definitely
-  want to choose R4xx0 for the CPU Type:
-
-	DECstation 5000/50
-	DECstation 5000/150
-	DECstation 5000/260
-	DECsystem 5900/260
-
-  otherwise choose R3000.
-
-Support for Cobalt Micro Server
-CONFIG_COBALT_MICRO_SERVER
-  Support for MIPS-based Cobalt boxes (they have been bought by Sun
-  and are now the "Server Appliance Business Unit") including the 2700
-  series -- versions 1 of the Qube and Raq.  To compile a Linux kernel
-  for this hardware, say Y here.
-
-Support for Cobalt 2800
-CONFIG_COBALT_28
-  Support for the second generation of MIPS-based Cobalt boxes (they
-  have been bought by Sun and are now the "Server Appliance Business
-  Unit") including the 2800 series -- versions 2 of the Qube and Raq.
-  To compile a Linux kernel for this hardware, say Y here.
-
-Support for the Momentum Computer Ocelot SBC
-CONFIG_MOMENCO_OCELOT
-  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-  Momentum Computer <http://www.momenco.com/>.
-
-Support for NEC DDB Vrc-5074
-CONFIG_DDB5074
-  This enables support for the VR5000-based NEC DDB Vrc-5074
-  evaluation board.
-
-Support for NEC DDB Vrc-5476
-CONFIG_DDB5476
-  This enables support for the R5432-based NEC DDB Vrc-5476
-  evaluation board.
-
-  Features : kernel debugging, serial terminal, NFS root fs, on-board
-  ether port (Need an additional patch at <http://linux.junsun.net/>),
-  USB, AC97, PCI, PCI VGA card & framebuffer console, IDE controller,
-  PS2 keyboard, PS2 mouse, etc.
-
-Support for NEC DDB Vrc-5477
-CONFIG_DDB5477
-  This enables support for the R5432-based NEC DDB Vrc-5477
-  evaluation board.
-
-  Features : kernel debugging, serial terminal, NFS root fs, on-board
-  ether port (Need an additional patch at <http://linux.junsun.net/>),
-  USB, AC97, PCI, etc.
-
-Support for MIPS Atlas board
-CONFIG_MIPS_ATLAS
-  This enables support for the QED R5231-based MIPS Atlas evaluation
-  board.
-
-Support for MIPS Malta board
-CONFIG_MIPS_MALTA
-  This enables support for the VR5000-based MIPS Malta evaluation
-  board.
-
-Support for Galileo Evaluation board or CoSine Orion
-CONFIG_ORION
-  Say Y if configuring for the Galileo evaluation board
-  or CoSine Orion.  More information is available at
-  <http://tochna.technion.ac.il/project/linux/html/linux.html>.
-
-  Otherwise, say N.
-
-Support for Mips Magnum 4000
-CONFIG_MIPS_MAGNUM_4000
-  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-  kernel that runs on these, say Y here. For details about Linux on
-  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-  <http://oss.sgi.com/mips/>.
-
-Enable Qtronix 990P Keyboard Support
-CONFIG_QTRONIX_KEYBOARD
-  Images of Qtronix keyboards are at
-  <http://www.qtronix.com/keyboard.html>.
-
-Support for Olivetti M700
-CONFIG_OLIVETTI_M700
-  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-  kernel that runs on these, say Y here. For details about Linux on
-  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-  <http://oss.sgi.com/mips/>.
-
-Support for SNI RM200 PCI
-CONFIG_SNI_RM200_PCI
-  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
-  Nixdorf Informationssysteme (SNI), parent company of Pyramid
-  Technology and now in turn merged with Fujitsu.  Say Y here to
-  support this machine type.
-
-Support for SGI IP22
-CONFIG_SGI_IP22
-  This are the SGI Indy, Challenge S and Indigo2, as well as certain
-  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
-  that runs on these, say Y here.
-
-Support for SGI IP27
-CONFIG_SGI_IP27
-  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
-  workstations.  To compile a Linux kernel that runs on these, say Y
-  here.
-
-IP27 N-Mode
-CONFIG_SGI_SN0_N_MODE
-  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-  configured in either N-Modes which allows for more nodes or M-Mode
-  which allows for more memory.  Your system is most probably
-  running in M-Mode, so you should say N here.
-
-MIPS JAZZ onboard SONIC Ethernet support
-CONFIG_MIPS_JAZZ_SONIC
-  This is the driver for the onboard card of MIPS Magnum 4000,
-  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-MIPS JAZZ FAS216 SCSI support
-CONFIG_JAZZ_ESP
-  This is the driver for the onboard SCSI host adapter of MIPS Magnum
-  4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
-  systems.
-
-MIPS GT96100 support
-CONFIG_MIPS_GT96100
-  Say Y here to support the Galileo Technology GT96100 communications
-  controller card.  There is a web page at <http://www.galileot.com/>.
-
-MIPS GT96100 Ethernet support
-CONFIG_MIPS_GT96100ETH
-  Say Y here to support the Ethernet subsystem on your GT96100 card.
-
-Zalon SCSI support
-CONFIG_SCSI_ZALON
-  The Zalon is an interface chip that sits between the PA-RISC
-  processor and the NCR 53c720 SCSI controller on K-series PA-RISC
-  boards (these are used, among other places, on some HP 780
-  workstations).  Say Y here to make sure it gets initialized
-  correctly before the Linux kernel tries to talk to the controller.
-
-Kernel floating-point instruction emulation
-CONFIG_MIPS_FPU_EMULATOR
-  This option enables the MIPS software floatingpoint support.  Due to
-  the way floating point works you should always enable this option
-  unless you exactly know what you're doing.
-
-SGI PROM Console Support
-CONFIG_SGI_PROM_CONSOLE
-  Say Y here to set up the boot console on serial port 0.
-
-DZ11 Serial Support
-CONFIG_DZ
-  DZ11-family serial controllers for VAXstations, including the
-  DC7085, M7814, and M7819.
-
-
-TURBOchannel support
-CONFIG_TC
-  TurboChannel is a DEC (now Compaq) bus for Alpha and MIPS processors.
-  Documentation on writing device drivers for TurboChannel is available at:
-  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
-
-Z85C30 Serial Support
-CONFIG_ZS
-  Documentation on the Zilog 85C350 serial communications controller
-  is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>.
-
-PCMCIA SCSI adapter support
-CONFIG_SCSI_PCMCIA
-  Say Y here if you intend to attach a PCMCIA or CardBus card to your
-  computer which acts as a SCSI host adapter. These are credit card
-  size devices often used with laptops.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions PCMCIA SCSI host adapters.
-
-Adaptec APA1480 CardBus support
-CONFIG_PCMCIA_APA1480
-  Say Y here if you intend to attach this type of CardBus SCSI host
-  adapter to your computer.
-
-  This driver is also available as a module called apa1480_cb.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support
-CONFIG_PCMCIA_NINJA_SCSI
-  If you intend to attach this type of PCMCIA SCSI host adapter to
-  your computer, say Y here and read
-  <file:Documentation/README.nsp_cs.eng>.
-
-  This driver is also available as a module called nsp_cs.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Adaptec AHA152X PCMCIA support
-CONFIG_PCMCIA_AHA152X
-  Say Y here if you intend to attach this type of PCMCIA SCSI host
-  adapter to your computer.
-
-  This driver is also available as a module called aha152x_cs.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Qlogic PCMCIA support
-CONFIG_PCMCIA_QLOGIC
-  Say Y here if you intend to attach this type of PCMCIA SCSI host
-  adapter to your computer.
-
-  This driver is also available as a module called qlogic_cs.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Future Domain PCMCIA support
-CONFIG_PCMCIA_FDOMAIN
-  Say Y here if you intend to attach this type of PCMCIA SCSI host
-  adapter to your computer.
-
-  This driver is also available as a module called fdomain_cs.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-# Choice: mipstype
-CPU type
-CONFIG_CPU_R3000
-  Please make sure to pick the right CPU type. Linux/MIPS is not
-  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
-  *not* work on R4000 machines and vice versa.  However, since most
-  of the supported machines have an R4000 (or similar) CPU, R4x00
-  might be a safe bet.  If the resulting kernel does not work,
-  try to recompile with R3000.
-
-  R3000    MIPS Technologies R3000-series processors,
-           including the 3041, 3051, and 3081.
-
-  R6000    MIPS Technologies R6000-series processors,
-           including the 64474, 64475, 64574 and 64575.
-
-  R4300    MIPS Technologies R4300-series processors.
-
-  R4x00    MIPS Technologies R4000-series processors other than 4300,
-           including the 4640, 4650, and 4700.
-
-  R5000    MIPS Technologies R5000-series processors other than the
-           Nevada.
-
-  R52xx    MIPS Technologies R52xx-series ("Nevada") processors.
-
-  R10000   MIPS Technologies R10000-series processors.
-
-R6000
-CONFIG_CPU_R6000
-  MIPS Technologies R6000-series processors, including the 64474,
-  64475, 64574 and 64575.
-
-R4300
-CONFIG_CPU_R4300
-  MIPS Technologies R4300-series processors.
-
-R4x00
-CONFIG_CPU_R4X00
-  MIPS Technologies R4000-series processors other than 4300, including
-  the 4640, 4650, and 4700.
-
-R5000
-CONFIG_CPU_R5000
-  MIPS Technologies R5000-series processors other than the Nevada.
-
-R52x0
-CONFIG_CPU_NEVADA
-  MIPS Technologies R52x0-series ("Nevada") processors.
-
-R8000
-CONFIG_CPU_R8000
-  MIPS Technologies R8000-series processors.
-
-R10000
-CONFIG_CPU_R10000
-  MIPS Technologies R10000-series processors.
-
-Discontiguous Memory Support
-CONFIG_DISCONTIGMEM
-  Say Y to upport efficient handling of discontiguous physical memory,
-  for architectures which are either NUMA (Non-Uniform Memory Access)
-  or have huge holes in the physical address space for other reasons.
-  See <file:Documentation/vm/numa> for more.
-
-Mapped kernel support
-CONFIG_MAPPED_KERNEL
-  Change the way a Linux kernel is loaded unto memory on a MIPS64
-  machine.  This is required in order to support text replication and
-  NUMA.  If you need to undersatand it, read the source code.
-
-Kernel text replication support
-CONFIG_REPLICATE_KTEXT
-  Say Y here to enable replicating the kernel text across multiple
-  nodes in a NUMA cluster.  This trades memory for speed.
-
-Exception handler replication support
-CONFIG_REPLICATE_EXHANDLERS
-  Say Y here to enable replicating the kernel exception handlers
-  across multiple nodes in a NUMA cluster. This trades memory for
-  speed.
-
-NUMA support?
-CONFIG_NUMA
-  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-  Access).  This option is for configuring high-end multiprocessor
-  server machines.  If in doubt, say N.
-
-CPU type
-CONFIG_CPU_VR41XX
-  The options selects support for the NEC VR41xx series of processors.
-  Only choose this option if you have one of these processors as a
-  kernel built with this option will not run on any other type of
-  processor or vice versa.
-
-CPU feature configuration
-CONFIG_CPU_ADVANCED
-  Saying yes here allows you to select support for various features
-  your CPU may or may not have.  Most people should say N here.
-
-ll/sc Instructions available
-CONFIG_CPU_HAS_LLSC
-  MIPS R4000 series and later provide the Load Linked (ll)
-  and Store Conditional (sc) instructions. More information is
-  available at <http://www.go-ecs.com/mips/miptek1.htm>.
-
-  Say Y here if your CPU has the ll and sc instructions.  Say Y here
-  for better performance, N if you don't know.  You must say Y here
-  for multiprocessor machines.
-
-lld and scd instructions
-CONFIG_CPU_HAS_LLDSCD
-  Say Y here if your CPU has the lld and scd instructions, the 64-bit
-  equivalents of ll and sc.  Say Y here for better performance, N if
-  you don't know.  You must say Y here for multiprocessor machines.
-
-Writeback Buffer available
-CONFIG_CPU_HAS_WB
-  Say N here for slightly better performance.  You must say Y here for
-  machines which require flushing of write buffers in software.  Saying
-  Y is the safe option; N may result in kernel malfunction and crashes.
-
-Support for large 64-bit configurations
-CONFIG_MIPS_INSANE_LARGE
-  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-  previous 64-bit processors which only supported 40 bit / 1TB. If you
-  need processes of more than 1TB virtual address space, say Y here.
-  This will result in additional memory usage, so it is not
-  recommended for normal users.
-
-Generate little endian code
-CONFIG_CPU_LITTLE_ENDIAN
-  Some MIPS machines can be configured for either little or big endian
-  byte order. These modes require different kernels. Say Y if your
-  machine is little endian, N if it's a big endian machine.
-
-Use power LED as a heartbeat
-CONFIG_HEARTBEAT
-  Use the power-on LED on your machine as a load meter.  The exact
-  behavior is platform-dependent, but normally the flash frequency is
-  a hyperbolic function of the 5-minute load average.
-
-Networking support
-CONFIG_NET
-  Unless you really know what you are doing, you should say Y here.
-  The reason is that some programs need kernel networking support even
-  when running on a stand-alone machine that isn't connected to any
-  other computer. If you are upgrading from an older kernel, you
-  should consider updating your networking tools too because changes
-  in the kernel and the tools often go hand in hand. The tools are
-  contained in the package net-tools, the location and version number
-  of which are given in <file:Documentation/Changes>.
-
-  For a general introduction to Linux networking, it is highly
-  recommended to read the NET-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Socket filtering
-CONFIG_FILTER
-  The Linux Socket Filter is derived from the Berkeley Packet Filter.
-  If you say Y here, user-space programs can attach a filter to any
-  socket and thereby tell the kernel that it should allow or disallow
-  certain types of data to get through the socket.  Linux Socket
-  Filtering works on all socket types except TCP for now.  See the
-  text file <file:Documentation/networking/filter.txt> for more
-  information.
-
-  You need to say Y here if you want to use PPP packet filtering
-  (see the CONFIG_PPP_FILTER option below).
-
-  If unsure, say N.
-
-Network packet filtering (replaces ipchains)
-CONFIG_NETFILTER
-  Netfilter is a framework for filtering and mangling network packets
-  that pass through your Linux box.
-
-  The most common use of packet filtering is to run your Linux box as
-  a firewall protecting a local network from the Internet. The type of
-  firewall provided by this kernel support is called a "packet
-  filter", which means that it can reject individual network packets
-  based on type, source, destination etc. The other kind of firewall,
-  a "proxy-based" one, is more secure but more intrusive and more
-  bothersome to set up; it inspects the network traffic much more
-  closely, modifies it and has knowledge about the higher level
-  protocols, which a packet filter lacks. Moreover, proxy-based
-  firewalls often require changes to the programs running on the local
-  clients. Proxy-based firewalls don't need support by the kernel, but
-  they are often combined with a packet filter, which only works if
-  you say Y here.
-
-  You should also say Y here if you intend to use your Linux box as
-  the gateway to the Internet for a local network of machines without
-  globally valid IP addresses. This is called "masquerading": if one
-  of the computers on your local network wants to send something to
-  the outside, your box can "masquerade" as that computer, i.e. it
-  forwards the traffic to the intended outside destination, but
-  modifies the packets to make it look like they came from the
-  firewall box itself. It works both ways: if the outside host
-  replies, the Linux box will silently forward the traffic to the
-  correct local computer. This way, the computers on your local net
-  are completely invisible to the outside world, even though they can
-  reach the outside and can receive replies. It is even possible to
-  run globally visible servers from within a masqueraded local network
-  using a mechanism called portforwarding. Masquerading is also often
-  called NAT (Network Address Translation).
-
-  Another use of Netfilter is in transparent proxying: if a machine on
-  the local network tries to connect to an outside host, your Linux
-  box can transparently forward the traffic to a local server,
-  typically a caching proxy server.
-
-  Various modules exist for netfilter which replace the previous
-  masquerading (ipmasqadm), packet filtering (ipchains), transparent
-  proxying, and portforwarding mechanisms. Please see
-  <file:Documentation/Changes> under "iptables" for the location of
-  these packages.
-
-  Make sure to say N to "Fast switching" below if you intend to say Y
-  here, as Fast switching currently bypasses netfilter.
-
-  Chances are that you should say Y here if you compile a kernel which
-  will run as a router and N for regular hosts. If unsure, say N.
-
-Network packet filtering debugging
-CONFIG_NETFILTER_DEBUG
-  You can say Y here if you want to get additional messages useful in
-  debugging the netfilter code.
-
-Connection tracking (required for masq/NAT)
-CONFIG_IP_NF_CONNTRACK
-  Connection tracking keeps a record of what packets have passed
-  through your machine, in order to figure out how they are related
-  into connections.
-
-  This is required to do Masquerading or other kinds of Network
-  Address Translation (except for Fast NAT).  It can also be used to
-  enhance packet filtering (see `Connection state match support'
-  below).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-IRC Send/Chat support
-CONFIG_IP_NF_IRC
-  There is a commonly-used extension to IRC called
-  Direct Client-to-Client Protocol (DCC).  This enables users to send
-  files to each other, and also chat to each other without the need
-  of a server.  DCC Sending is used anywhere you send files over IRC,
-  and DCC Chat is most commonly used by Eggdrop bots.  If you are
-  using NAT, this extension will enable you to send files and initiate
-  chats.  Note that you do NOT need this extension to get files or
-  have others initiate chats, or everything else in IRC.
-
-  If you want to compile it as a module, say 'M' here and read
-  Documentation/modules.txt.  If unsure, say 'N'.
-
-FTP protocol support
-CONFIG_IP_NF_FTP
-  Tracking FTP connections is problematic: special helpers are
-  required for tracking them, and doing masquerading and other forms
-  of Network Address Translation on them.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `Y'.
-
-User space queueing via NETLINK
-CONFIG_IP_NF_QUEUE
-  Netfilter has the ability to queue packets to user space: the
-  netlink device can be used to access them using this driver.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-IP tables support (required for filtering/masq/NAT)
-CONFIG_IP_NF_IPTABLES
-  iptables is a general, extensible packet identification framework.
-  The packet filtering and full NAT (masquerading, port forwarding,
-  etc) subsystems now use this: say `Y' or `M' here if you want to use
-  either of those.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-limit match support
-CONFIG_IP_NF_MATCH_LIMIT
-  limit matching allows you to control the rate at which a rule can be
-  matched: mainly useful in combination with the LOG target ("LOG
-  target support", below) and to avoid some Denial of Service attacks.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MAC address match support
-CONFIG_IP_NF_MATCH_MAC
-  MAC matching allows you to match packets based on the source
-  Ethernet address of the packet.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Netfilter MARK match support
-CONFIG_IP_NF_MATCH_MARK
-  Netfilter mark matching allows you to match packets based on the
-  `nfmark' value in the packet.  This can be set by the MARK target
-  (see below).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Multiple port match support
-CONFIG_IP_NF_MATCH_MULTIPORT
-  Multiport matching allows you to match TCP or UDP packets based on
-  a series of source or destination ports: normally a rule can only
-  match a single range of ports.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-TTL match support
-CONFIG_IP_NF_MATCH_TTL
-  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
-  to match packets by their TTL value.
-
-  If you want to compile it as a module, say M here and read
-  Documentation/modules.txt.  If unsure, say `N'.
-
-length match support
-CONFIG_IP_NF_MATCH_LENGTH
-  This option allows you to match the length of a packet against a
-  specific value or range of values.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-AH/ESP match support
-CONFIG_IP_NF_MATCH_AH_ESP
-  These two match extensions (`ah' and `esp') allow you to match a
-  range of SPIs inside AH or ESP headers of IPSec packets.
-
-  If you want to compile it as a module, say M here and read
-  Documentation/modules.txt.  If unsure, say `N'.
-
-TOS match support
-CONFIG_IP_NF_MATCH_TOS
-  TOS matching allows you to match packets based on the Type Of
-  Service fields of the IP packet.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Connection state match support
-CONFIG_IP_NF_MATCH_STATE
-  Connection state matching allows you to match packets based on their
-  relationship to a tracked connection (ie. previous packets).  This
-  is a powerful tool for packet classification.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Unclean match support
-CONFIG_IP_NF_MATCH_UNCLEAN
-  Unclean packet matching matches any strange or invalid packets, by
-  looking at a series of fields in the IP, TCP, UDP and ICMP headers.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Owner match support
-CONFIG_IP_NF_MATCH_OWNER
-  Packet owner matching allows you to match locally-generated packets
-  based on who created them: the user, group, process or session.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Packet filtering
-CONFIG_IP_NF_FILTER
-  Packet filtering defines a table `filter', which has a series of
-  rules for simple packet filtering at local input, forwarding and
-  local output.  See the man page for iptables(8).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-REJECT target support
-CONFIG_IP_NF_TARGET_REJECT
-  The REJECT target allows a filtering rule to specify that an ICMP
-  error should be issued in response to an incoming packet, rather
-  than silently being dropped.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MIRROR target support
-CONFIG_IP_NF_TARGET_MIRROR
-  The MIRROR target allows a filtering rule to specify that an
-  incoming packet should be bounced back to the sender.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Full NAT (Network Address Translation)
-CONFIG_IP_NF_NAT
-  The Full NAT option allows masquerading, port forwarding and other
-  forms of full Network Address Port Translation.  It is controlled by
-  the `nat' table in iptables: see the man page for iptables(8).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MASQUERADE target support
-CONFIG_IP_NF_TARGET_MASQUERADE
-  Masquerading is a special case of NAT: all outgoing connections are
-  changed to seem to come from a particular interface's address, and
-  if the interface goes down, those connections are lost.  This is
-  only useful for dialup accounts with dynamic IP address (ie. your IP
-  address will be different on next dialup).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Basic SNMP-ALG support
-CONFIG_IP_NF_NAT_SNMP_BASIC
-
-  This module implements an Application Layer Gateway (ALG) for
-  SNMP payloads.  In conjunction with NAT, it allows a network
-  management system to access multiple private networks with
-  conflicting addresses.  It works by modifying IP addresses
-  inside SNMP payloads to match IP-layer NAT mapping.
-
-  This is the "basic" form of SNMP-ALG, as described in RFC 2962
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-REDIRECT target support
-CONFIG_IP_NF_TARGET_REDIRECT
-  REDIRECT is a special case of NAT: all incoming connections are
-  mapped onto the incoming interface's address, causing the packets to
-  come to the local machine instead of passing through.  This is
-  useful for transparent proxies.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Packet mangling
-CONFIG_IP_NF_MANGLE
-  This option adds a `mangle' table to iptables: see the man page for
-  iptables(8).  This table is used for various packet alterations
-  which can effect how the packet is routed.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-TOS target support
-CONFIG_IP_NF_TARGET_TOS
-  This option adds a `TOS' target, which allows you to create rules in
-  the `mangle' table which alter the Type Of Service field of an IP
-  packet prior to routing.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MARK target support
-CONFIG_IP_NF_TARGET_MARK
-  This option adds a `MARK' target, which allows you to create rules
-  in the `mangle' table which alter the netfilter mark (nfmark) field
-  associated with the packet prior to routing. This can change
-  the routing method (see `Use netfilter MARK value as routing
-  key') and can also be used by other subsystems to change their
-  behavior.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-TCPMSS target support
-CONFIG_IP_NF_TARGET_TCPMSS
-  This option adds a `TCPMSS' target, which allows you to alter the
-  MSS value of TCP SYN packets, to control the maximum size for that
-  connection (usually limiting it to your outgoing interface's MTU
-  minus 40).
-
-  This is used to overcome criminally braindead ISPs or servers which
-  block ICMP Fragmentation Needed packets.  The symptoms of this
-  problem are that everything works fine from your Linux
-  firewall/router, but machines behind it can never exchange large
-  packets:
-	1) Web browsers connect, then hang with no data received.
-	2) Small mail works fine, but large emails hang.
-	3) ssh works fine, but scp hangs after initial handshaking.
-
-  Workaround: activate this option and add a rule to your firewall
-  configuration like:
-
-        iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
-		 -j TCPMSS --clamp-mss-to-pmtu
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-TCPMSS match support
-CONFIG_IP_NF_MATCH_TCPMSS
-  This option adds a `tcpmss' match, which allows you to examine the
-  MSS value of TCP SYN packets, which control the maximum packet size
-  for that connection.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-ULOG target support
-CONFIG_IP_NF_TARGET_ULOG
-  This option adds a `ULOG' target, which allows you to create rules in
-  any iptables table. The packet is passed to a userspace logging
-  daemon using netlink multicast sockets; unlike the LOG target
-  which can only be viewed through syslog.
-
-  The apropriate userspace logging daemon (ulogd) may be obtained from
-  http://www.gnumonks.org/projects/ulogd
-
-  If you want to compile it as a module, say M here and read
-  Documentation/modules.txt.  If unsure, say `N'.
-
-LOG target support
-CONFIG_IP_NF_TARGET_LOG
-  This option adds a `LOG' target, which allows you to create rules in
-  any iptables table which records the packet header to the syslog.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-ipchains (2.2-style) support
-CONFIG_IP_NF_COMPAT_IPCHAINS
-  This option places ipchains (with masquerading and redirection
-  support) back into the kernel, using the new netfilter
-  infrastructure.  It is not recommended for new installations (see
-  `Packet filtering').  With this enabled, you should be able to use
-  the ipchains tool exactly as in 2.2 kernels.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-ipfwadm (2.0-style) support
-CONFIG_IP_NF_COMPAT_IPFWADM
-  This option places ipfwadm (with masquerading and redirection
-  support) back into the kernel, using the new netfilter
-  infrastructure.  It is not recommended for new installations (see
-  `Packet filtering').  With this enabled, you should be able to use
-  the ipfwadm tool exactly as in 2.0 kernels.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MAC address match support
-CONFIG_IP6_NF_MATCH_MAC
-  mac matching allows you to match packets based on the source
-  Ethernet address of the packet.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Netfilter MARK match support
-CONFIG_IP6_NF_MATCH_MARK
-  Netfilter mark matching allows you to match packets based on the
-  `nfmark' value in the packet.  This can be set by the MARK target
-  (see below).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Multiple port match support
-CONFIG_IP6_NF_MATCH_MULTIPORT
-  Multiport matching allows you to match TCP or UDP packets based on
-  a series of source or destination ports: normally a rule can only
-  match a single range of ports.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-IPV6 queue handler (EXPERIMENTAL)
-CONFIG_IP6_NF_QUEUE
-
-  This option adds a queue handler to the kernel for IPv6
-  packets which lets us to receive the filtered packets
-  with QUEUE target using libiptc as we can do with
-  the IPv4 now.
-
-  (C) Fernando Anton 2001
-  IPv64 Project - Work based in IPv64 draft by Arturo Azcorra.
-  Universidad Carlos III de Madrid
-  Universidad Politecnica de Alcala de Henares
-  email: fanton@it.uc3m.es
-
-  If you want to compile it as a module, say M here and read
-  Documentation/modules.txt. If unsure, say `N'.
-
-Owner match support
-CONFIG_IP6_NF_MATCH_OWNER
-  Packet owner matching allows you to match locally-generated packets
-  based on who created them: the user, group, process or session.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Packet filtering
-CONFIG_IP6_NF_FILTER
-  Packet filtering defines a table `filter', which has a series of
-  rules for simple packet filtering at local input, forwarding and
-  local output.  See the man page for iptables(8).
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-Packet mangling
-CONFIG_IP6_NF_MANGLE
-  This option adds a `mangle' table to iptables: see the man page for
-  iptables(8).  This table is used for various packet alterations
-  which can effect how the packet is routed.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-MARK target support
-CONFIG_IP6_NF_TARGET_MARK
-  This option adds a `MARK' target, which allows you to create rules
-  in the `mangle' table which alter the netfilter mark (nfmark) field
-  associated with the packet packet prior to routing. This can change
-  the routing method (see `Use netfilter MARK value as routing
-  key') and can also be used by other subsystems to change their
-  behavior.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-TCP Explicit Congestion Notification support
-CONFIG_INET_ECN
-  Explicit Congestion Notification (ECN) allows routers to notify
-  clients about network congestion, resulting in fewer dropped packets
-  and increased network performance.  This option adds ECN support to
-  the Linux kernel, as well as a sysctl (/proc/sys/net/ipv4/tcp_ecn)
-  which allows ECN support to be disabled at runtime.
-
-  Note that, on the Internet, there are many broken firewalls which
-  refuse connections from ECN-enabled machines, and it may be a while
-  before these firewalls are fixed.  Until then, to access a site
-  behind such a firewall (some of which are major sites, at the time
-  of this writing) you will have to disable this option, either by
-  saying N now or by using the sysctl.
-
-  If in doubt, say N.
-
-IPv6 tables support (required for filtering/masq/NAT)
-CONFIG_IP6_NF_IPTABLES
-  ip6tables is a general, extensible packet identification framework.
-  Currently only the packet filtering and packet mangling subsystem
-  for IPv6 use this, but connection tracking is going to follow.
-  Say 'Y' or 'M' here if you want to use either of those.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-IPv6 limit match support
-CONFIG_IP6_NF_MATCH_LIMIT
-  limit matching allows you to control the rate at which a rule can be
-  matched: mainly useful in combination with the LOG target ("LOG
-  target support", below) and to avoid some Denial of Service attacks.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-LOG target support
-CONFIG_IP6_NF_TARGET_LOG
-  This option adds a `LOG' target, which allows you to create rules in
-  any iptables table which records the packet header to the syslog.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  If unsure, say `N'.
-
-SYN flood protection
-CONFIG_SYN_COOKIES
-  Normal TCP/IP networking is open to an attack known as "SYN
-  flooding". This denial-of-service attack prevents legitimate remote
-  users from being able to connect to your computer during an ongoing
-  attack and requires very little work from the attacker, who can
-  operate from anywhere on the Internet.
-
-  SYN cookies provide protection against this type of attack. If you
-  say Y here, the TCP/IP stack will use a cryptographic challenge
-  protocol known as "SYN cookies" to enable legitimate users to
-  continue to connect, even when your machine is under attack. There
-  is no need for the legitimate users to change their TCP/IP software;
-  SYN cookies work transparently to them. For technical information
-  about SYN cookies, check out <http://cr.yp.to/syncookies.html>.
-
-  If you are SYN flooded, the source address reported by the kernel is
-  likely to have been forged by the attacker; it is only reported as
-  an aid in tracing the packets to their actual source and should not
-  be taken as absolute truth.
-
-  SYN cookies may prevent correct error reporting on clients when the
-  server is really overloaded. If this happens frequently better turn
-  them off.
-
-  If you say Y here, note that SYN cookies aren't enabled by default;
-  you can enable them by saying Y to "/proc file system support" and
-  "Sysctl support" below and executing the command
-
-    echo 1 >/proc/sys/net/ipv4/tcp_syncookies
-
-  at boot time after the /proc file system has been mounted.
-
-  If unsure, say N.
-
-HCI EMU (virtual device) driver
-CONFIG_BLUEZ_HCIEMU
-  Bluetooth Virtual HCI device driver.
-  This driver is required if you want to use HCI Emulation software.
-
-  Say Y here to compile support for Virtual HCI devices into the
-  kernel or say M to compile it as module (hci_usb.o).
-
-# Choice: alphatype
-Alpha system type
-CONFIG_ALPHA_GENERIC
-  This is the system type of your hardware.  A "generic" kernel will
-  run on any supported Alpha system. However, if you configure a
-  kernel for your specific system, it will be faster and smaller.
-
-  To find out what type of Alpha system you have, you may want to
-  check out the Linux/Alpha FAQ, accessible on the WWW from
-  <http://www.alphalinux.org/>. In summary:
-
-  Alcor/Alpha-XLT     AS 600
-  Alpha-XL            XL-233, XL-266
-  AlphaBook1          Alpha laptop
-  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-  Cabriolet           AlphaPC64, AlphaPCI64
-  DP264               DP264
-  EB164               EB164 21164 evaluation board
-  EB64+               EB64+ 21064 evaluation board
-  EB66                EB66 21066 evaluation board
-  EB66+               EB66+ 21066 evaluation board
-  Jensen              DECpc 150, DEC 2000 model 300,
-                      DEC 2000 model 500
-  LX164               AlphaPC164-LX
-  Miata               Personal Workstation 433a, 433au, 500a,
-                      500au, 600a, or 600au
-  Mikasa              AS 1000
-  Noname              AXPpci33, UDB (Multia)
-  Noritake            AS 1000A, AS 600A, AS 800
-  PC164               AlphaPC164
-  Rawhide             AS 1200, AS 4000, AS 4100
-  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
-  SX164               AlphaPC164-SX
-  Sable               AS 2000, AS 2100
-  Shark		      DS 20L
-  Takara              Takara
-  Titan               Privateer
-  Wildfire            AlphaServer GS 40/80/160/320
-
-  If you don't know what to do, choose "generic".
-
-# Most of the information on these variants is from
-# <http://www.alphalinux.org/docs/alpha-howto.html>
-Alcor/Alpha-XLT
-CONFIG_ALPHA_ALCOR
-  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
-  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
-  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
-  controller (256-bit memory bus) and a PCI interface.  It also does
-  all the work required to support an external Bcache and to maintain
-  memory coherence when a PCI device DMAs into (or out of) memory.
-
-Alpha-XL
-CONFIG_ALPHA_XL
-  XL-233 and XL-266-based Alpha systems.
-
-AlphaBook1
-CONFIG_ALPHA_BOOK1
-  Dec AlphaBook1/Burns Alpha-based laptops.
-
-Avanti
-CONFIG_ALPHA_AVANTI
-  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-  Alphas. Info at
-  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
-Cabriolet
-CONFIG_ALPHA_CABRIOLET
-  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-  Bcache SIMMs.  Requires power supply with 3.3V output.
-
-DP264
-CONFIG_ALPHA_DP264
-  Various 21264 systems with the tsunami core logic chipset.
-  API Networks: 264DP, UP2000(+), CS20;
-  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
-
-EB164
-CONFIG_ALPHA_EB164
-  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-  motherboard.  Requires power supply with 3.3V output.
-
-EB64+
-CONFIG_ALPHA_EB64P
-  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-  Runs from standard PC power supply.
-
-EB66
-CONFIG_ALPHA_EB66
-  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-  supply.  The EB66 schematic was published as a marketing poster
-  advertising the 21066 as "the first microprocessor in the world with
-  embedded PCI".
-
-EB66+
-CONFIG_ALPHA_EB66P
-  Later variant of the EB66 board.
-
-Eiger
-CONFIG_ALPHA_EIGER
-  Apparently an obscure OEM single-board computer based on the
-  Typhoon/Tsunami chipset family. Information on it is scanty.
-
-Jensen
-CONFIG_ALPHA_JENSEN
-  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-  of the first-generation Alpha systems. A number of these systems
-  seem to be available on the second- hand market. The Jensen is a
-  floor-standing tower system which originally used a 150MHz 21064 It
-  used programmable logic to interface a 486 EISA I/O bridge to the
-  CPU.
-
-LX164
-CONFIG_ALPHA_LX164
-  A technical overview of this board is available at
-  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
-
-Miata
-CONFIG_ALPHA_MIATA
-  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
-  or 600au).  There is an Installation HOWTO for this hardware at
-  <http://members.brabant.chello.nl/~s.vandereijk/miata.html>.
-
-Mikasa
-CONFIG_ALPHA_MIKASA
-  AlphaServer 1000-based Alpha systems.
-
-Nautilus
-CONFIG_ALPHA_NAUTILUS
-  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-
-Noname
-CONFIG_ALPHA_NONAME
-  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-  is a baby-AT size, and runs from a standard PC power supply. It has
-  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-  2 versions, with either PS/2 or large DIN connectors for the
-  keyboard.
-
-Noritake
-CONFIG_ALPHA_NORITAKE
-  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
-  systems.
-
-Rawhide
-CONFIG_ALPHA_RAWHIDE
-  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
-  See HOWTO at
-  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
-
-Ruffian
-CONFIG_ALPHA_RUFFIAN
-  Samsung APC164UX.  There is a page on known problems and workarounds
-  at <http://www.alphalinux.org/faq/FAQ-11.html>.
-
-Sable
-CONFIG_ALPHA_SABLE
-  Digital AlphaServer 2000 and 2100-based systems.
-
-Takara
-CONFIG_ALPHA_TAKARA
-  Alpha 11164-based OEM single-board computer.
-
-Wildfire
-CONFIG_ALPHA_WILDFIRE
-  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
-
-EV5 CPU daughtercard (model 5/xxx)
-CONFIG_ALPHA_PRIMO
-  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-EV5 CPU(s) (model 5/xxx)
-CONFIG_ALPHA_GAMMA
-  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-Use SRM as bootloader
-CONFIG_ALPHA_SRM
-  There are two different types of booting firmware on Alphas: SRM,
-  which is command line driven, and ARC, which uses menus and arrow
-  keys. Details about the Linux/Alpha booting process are contained in
-  the Linux/Alpha FAQ, accessible on the WWW from
-  <http://www.alphalinux.org/>.
-
-  The usual way to load Linux on an Alpha machine is to use MILO
-  (a bootloader that lets you pass command line parameters to the
-  kernel just like lilo does for the x86 architecture) which can be
-  loaded either from ARC or can be installed directly as a permanent
-  firmware replacement from floppy (which requires changing a certain
-  jumper on the motherboard). If you want to do either of these, say N
-  here. If MILO doesn't work on your system (true for Jensen
-  motherboards), you can bypass it altogether and boot Linux directly
-  from an SRM console; say Y here in order to do that. Note that you
-  won't be able to boot from an IDE disk using SRM.
-
-  If unsure, say N.
-
-Legacy kernel start address
-CONFIG_ALPHA_LEGACY_START_ADDRESS
-  The 2.4 kernel changed the kernel start address from 0x310000
-  to 0x810000 to make room for the Wildfire's larger SRM console.
-
-  If you're using aboot 0.7 or later, the bootloader will examine the
-  ELF headers to determine where to transfer control. Unfortunately,
-  most older bootloaders -- APB or MILO -- hardcoded the kernel start
-  address rather than examining the ELF headers, and the result is a
-  hard lockup.
-
-  Say Y if you have a broken bootloader.  Say N if you do not, or if
-  you wish to run on Wildfire.
-
-Large VMALLOC support
-CONFIG_ALPHA_LARGE_VMALLOC
-  Process creation and other aspects of virtual memory management can
-  be streamlined if we restrict the kernel to one PGD for all vmalloc
-  allocations.  This equates to about 8GB.
-
-  Under normal circumstances, this is so far and above what is needed
-  as to be laughable.  However, there are certain applications (such
-  as benchmark-grade in-kernel web serving) that can make use of as
-  much vmalloc space as is available.
-
-  Say N unless you know you need gobs and gobs of vmalloc space.
-
-Non-standard serial port support
-CONFIG_SERIAL_NONSTANDARD
-  Say Y here if you have any non-standard serial boards -- boards
-  which aren't supported using the standard "dumb" serial driver.
-  This includes intelligent serial boards such as Cyclades,
-  Digiboards, etc. These are usually used for systems that need many
-  serial ports because they serve many terminals or dial-in
-  connections.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about non-standard serial boards.
-
-  Most people can say N here.
-
-Extended dumb serial driver options
-CONFIG_SERIAL_EXTENDED
-  If you wish to use any non-standard features of the standard "dumb"
-  driver, say Y here. This includes HUB6 support, shared serial
-  interrupts, special multiport support, support for more than the
-  four COM 1/2/3/4 boards, etc.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about serial driver options. If unsure, say N.
-
-Support more than 4 serial ports
-CONFIG_SERIAL_MANY_PORTS
-  Say Y here if you have dumb serial boards other than the four
-  standard COM 1/2/3/4 ports. This may happen if you have an AST
-  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
-  from <http://www.linuxdoc.org/docs.html#howto>), or other custom
-  serial port hardware which acts similar to standard serial port
-  hardware. If you only use the standard COM 1/2/3/4 ports, you can
-  say N here to save some memory. You can also say Y if you have an
-  "intelligent" multiport card such as Cyclades, Digiboards, etc.
-
-Support for serial ports defined by ACPI tables
-CONFIG_SERIAL_ACPI
-  Legacy free machines may not have serial ports at the legacy COM1, 
-  COM2 etc addresses. Serial ports on such machines are described by
-  the ACPI tables SPCR (Serial Port Console Redirection) table and 
-  DBGP (Debug Port) table. Say Y here if you want to include support
-  for these serial ports.
-
-Support for sharing serial interrupts
-CONFIG_SERIAL_SHARE_IRQ
-  Some serial boards have hardware support which allows multiple dumb
-  serial ports on the same board to share a single IRQ. To enable
-  support for this in the serial driver, say Y here.
-
-Auto-detect IRQ on standard ports (unsafe)
-CONFIG_SERIAL_DETECT_IRQ
-  Say Y here if you want the kernel to try to guess which IRQ
-  to use for your serial port.
-
-  This is considered unsafe; it is far better to configure the IRQ in
-  a boot script using the setserial command.
-
-  If unsure, say N.
-
-Support special multiport boards
-CONFIG_SERIAL_MULTIPORT
-  Some multiport serial ports have special ports which are used to
-  signal when there are any serial ports on the board which need
-  servicing. Say Y here to enable the serial driver to take advantage
-  of those special I/O ports.
-
-SGI Zilog85C30 serial support
-CONFIG_SGI_SERIAL
-  If you want to use your SGI's built-in serial ports under Linux,
-  answer Y.
-
-SGI Newport Graphics support
-CONFIG_SGI_NEWPORT_GFX
-  If you have an SGI machine and you want to compile the graphics
-  drivers, say Y here. This will include the code for the
-  /dev/graphics and /dev/gfx drivers into the kernel for supporting
-  virtualized access to your graphics hardware.
-
-SGI Newport Console support
-CONFIG_SGI_NEWPORT_CONSOLE
-  Say Y here if you want the console on the Newport aka XL graphics
-  card of your Indy.  Most people say Y here.
-
-SGI DS1286 RTC support
-CONFIG_SGI_DS1286
-  If you say Y here and create a character special file /dev/rtc with
-  major number 10 and minor number 135 using mknod ("man mknod"), you
-  will get access to the real time clock built into your computer.
-  Every SGI has such a clock built in. It reports status information
-  via the file /proc/rtc and its behaviour is set by various ioctls on
-  /dev/rtc.
-
-Support the Bell Technologies HUB6 card
-CONFIG_HUB6
-  Say Y here to enable support in the dumb serial driver to support
-  the HUB6 card.
-
-PCMCIA serial device support
-CONFIG_PCMCIA_SERIAL_CS
-  Say Y here to enable support for 16-bit PCMCIA serial devices,
-  including serial port cards, modems, and the modem functions of
-  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
-  credit-card size devices often used with laptops.)
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called serial_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-ACP Modem (Mwave) support
-CONFIG_MWAVE
-  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
-  kernel driver and a user level application. Together these components
-  support direct attachment to public switched telephone networks (PSTNs)
-  and support selected world wide countries.
-
-  This version of the ACP Modem driver supports the IBM Thinkpad 600E,
-  600, and 770 that include on board ACP modem hardware.
-
-  The modem also supports the standard communications port interface
-  (ttySx) and is compatible with the Hayes AT Command Set.
-
-  The user level application needed to use this driver can be found at
-  the IBM Linux Technology Center (LTC) web site:
-  <http://www.ibm.com/linux/ltc/>.
-
-  If you own one of the above IBM Thinkpads which has the Mwave chipset
-  in it, say Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mwave.o. If you want to compile it as
-  a module, say M here and read Documentation/modules.txt.
-
-/dev/agpgart (AGP Support)
-CONFIG_AGP
-  AGP (Accelerated Graphics Port) is a bus system mainly used to
-  connect graphics cards to the rest of the system.
-
-  If you have an AGP system and you say Y here, it will be possible to
-  use the AGP features of your 3D rendering video card. This code acts
-  as a sort of "AGP driver" for the motherboard's chipset.
-
-  If you need more texture memory than you can get with the AGP GART
-  (theoretically up to 256 MB, but in practice usually 64 or 128 MB
-  due to kernel allocation issues), you could use PCI accesses
-  and have up to a couple gigs of texture space.
-
-  Note that this is the only means to have XFree4/GLX use
-  write-combining with MTRR support on the AGP bus. Without it, OpenGL
-  direct rendering will be a lot slower but still faster than PIO.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-  This driver is available as a module.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  The
-  module will be called agpgart.o.
-
-Intel 440LX/BX/GX/815/820/830/840/845/850/860 support
-CONFIG_AGP_INTEL
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850 and 860 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-Intel I810/I815 DC100/I810e support
-CONFIG_AGP_I810
-  This option gives you AGP support for the Xserver on the Intel 810
-  815 and 830m chipset boards for their on-board integrated graphics. This
-  is required to do any useful video modes with these boards.
-
-VIA chipset support
-CONFIG_AGP_VIA
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on VIA MPV3/Apollo Pro chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-AMD Irongate, 761, and 762 support
-CONFIG_AGP_AMD
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-Generic SiS support
-CONFIG_AGP_SIS
-  This option gives you AGP support for the GLX component of the "soon
-  to be released" XFree86 4.x on Silicon Integrated Systems [SiS]
-  chipsets.
-
-  Note that 5591/5592 AGP chipsets are NOT supported.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-Serverworks LE/HE support
-CONFIG_AGP_SWORKS
-  Say Y here to support the Serverworks AGP card.  See 
-  <http://www.serverworks.com/> for product descriptions and images.
-
-ALI chipset support
-CONFIG_AGP_ALI
-  This option gives you AGP support for the GLX component of the
-  XFree86 4.x on the following ALi chipsets.  The supported chipsets
-  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
-  For the ALi-chipset question, ALi suggests you refer to
-  <http://www.ali.com.tw/eng/support/index.shtml>.
-
-  The M1541 chipset can do AGP 1x and 2x, but note that there is an
-  acknowledged incompatibility with Matrox G200 cards. Due to
-  timing issues, this chipset cannot do AGP 2x with the G200.
-  This is a hardware limitation. AGP 1x seems to be fine, though.
-
-  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
-  use GLX or DRI.  If unsure, say N.
-
-Support for ISA-bus hardware
-CONFIG_ISA
-  Find out whether you have ISA slots on your motherboard.  ISA is the
-  name of a bus system, i.e. the way the CPU talks to the other stuff
-  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-Support for PCI bus hardware
-CONFIG_PCI
-  Find out whether you have a PCI motherboard. PCI is the name of a
-  bus system, i.e. the way the CPU talks to the other stuff inside
-  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-  VESA. If you have PCI, say Y, otherwise N.
-
-  The PCI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
-  information about which PCI hardware does work under Linux and which
-  doesn't.
-
-PCI support
-CONFIG_PCI_INTEGRATOR
-  Find out whether you have a PCI motherboard. PCI is the name of a
-  bus system, i.e. the way the CPU talks to the other stuff inside
-  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-  VESA. If you have PCI, say Y, otherwise N.
-
-  The PCI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
-  information about which PCI hardware does work under Linux and which
-  doesn't.
-
-QSpan PCI
-CONFIG_PCI_QSPAN
-  Find out whether you have a PCI motherboard. PCI is the name of a
-  bus system, i.e. the way the CPU talks to the other stuff inside
-  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-  VESA. If you have PCI, say Y, otherwise N.
-
-  The PCI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
-  information about which PCI hardware does work under Linux and which
-  doesn't.
-
-# Choice: pci_access
-PCI access mode
-CONFIG_PCI_GOBIOS
-  On PCI systems, the BIOS can be used to detect the PCI devices and
-  determine their configuration. However, some old PCI motherboards
-  have BIOS bugs and may crash if this is done. Also, some embedded
-  PCI-based systems don't have any BIOS at all. Linux can also try to
-  detect the PCI hardware directly without using the BIOS.
-
-  With this option, you can specify how Linux should detect the PCI
-  devices. If you choose "BIOS", the BIOS will be used, if you choose
-  "Direct", the BIOS won't be used, and if you choose "Any", the
-  kernel will try the direct access method and falls back to the BIOS
-  if that doesn't work. If unsure, go with the default, which is
-  "Any".
-
-PCI device name database
-CONFIG_PCI_NAMES
-  By default, the kernel contains a database of all known PCI device
-  names to make the information in /proc/pci, /proc/ioports and
-  similar files comprehensible to the user. This database increases
-  size of the kernel image by about 80KB, but it gets freed after the
-  system boots up, so it doesn't take up kernel memory. Anyway, if you
-  are building an installation floppy or kernel for an embedded system
-  where kernel image size really matters, you can disable this feature
-  and you'll get device ID numbers instead of names.
-
-  When in doubt, say Y.
-
-PCI Hotplug support
-CONFIG_HOTPLUG_PCI
-  Say Y here if you have a motherboard with a PCI Hotplug controller.
-  This allows you to add and remove PCI cards while the machine is
-  powered up and running.  The file system pcihpfs must be mounted
-  in order to interact with any PCI Hotplug controllers.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pci_hotplug.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  When in doubt, say N.
-
-PCI Compaq Hotplug controller
-CONFIG_HOTPLUG_PCI_COMPAQ
-  Say Y here if you have a motherboard with a Compaq PCI Hotplug
-  controller.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cpqphp.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  When in doubt, say N.
-
-PCI Compaq Hotplug controller NVRAM support
-CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM
-  Say Y here if you have a Compaq server that has a PCI Hotplug
-  controller.  This will allow the PCI Hotplug driver to store the PCI
-  system configuration options in NVRAM.
-
-  When in doubt, say N.
-
-MCA support
-CONFIG_MCA
-  MicroChannel Architecture is found in some IBM PS/2 machines and
-  laptops.  It is a bus system similar to PCI or ISA. See
-  <file:Documentation/mca.txt> (and especially the web page given
-  there) before attempting to build an MCA bus kernel.
-
-Support for EISA-bus hardware
-CONFIG_EISA
-  The Extended Industry Standard Architecture (EISA) bus was
-  developed as an open alternative to the IBM MicroChannel bus.
-
-  The EISA bus provided some of the features of the IBM MicroChannel
-  bus while maintaining backward compatibility with cards made for
-  the older ISA bus.  The EISA bus saw limited use between 1988 and
-  1995 when it was made obsolete by the PCI bus.
-
-  Say Y here if you are building a kernel for an EISA-based machine.
-
-  Otherwise, say N.
-
-SGI Visual Workstation support
-CONFIG_VISWS
-  The SGI Visual Workstation series is an IA32-based workstation
-  based on SGI systems chips with some legacy PC hardware attached.
-  Say Y here to create a kernel to run on the SGI 320 or 540.
-  A kernel compiled for the Visual Workstation will not run on other
-  PC boards and vice versa.
-  See <file:Documentation/sgi-visws.txt> for more.
-
-SGI Visual Workstation framebuffer support
-CONFIG_FB_SGIVW
-  SGI Visual Workstation support for framebuffer graphics.
-
-I2O support
-CONFIG_I2O
-  The Intelligent Input/Output (I2O) architecture allows hardware
-  drivers to be split into two parts: an operating system specific
-  module called the OSM and an hardware specific module called the
-  HDM. The OSM can talk to a whole range of HDM's, and ideally the
-  HDM's are not OS dependent. This allows for the same HDM driver to
-  be used under different operating systems if the relevant OSM is in
-  place. In order for this to work, you need to have an I2O interface
-  adapter card in your computer. This card contains a special I/O
-  processor (IOP), thus allowing high speeds since the CPU does not
-  have to deal with I/O.
-
-  If you say Y here, you will get a choice of interface adapter
-  drivers and OSM's with the following questions.
-
-  This support is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  You will get modules called
-  i2o_core.o and i2o_config.o.
-
-  If unsure, say N.
-
-I2O PCI support
-CONFIG_I2O_PCI
-  Say Y for support of PCI bus I2O interface adapters. Currently this
-  is the only variety supported, so you should say Y.
-
-  This support is also available as a module called i2o_pci.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-I2O Block OSM
-CONFIG_I2O_BLOCK
-  Include support for the I2O Block OSM. The Block OSM presents disk
-  and other structured block devices to the operating system.
-
-  This support is also available as a module called i2o_block.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-I2O LAN OSM
-CONFIG_I2O_LAN
-  Include support for the LAN OSM. You will also need to include
-  support for token ring or FDDI if you wish to use token ring or FDDI
-  I2O cards with this driver.
-
-  This support is also available as a module called i2o_lan.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-I2O SCSI OSM
-CONFIG_I2O_SCSI
-  Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel
-  I2O controller. You can use both the SCSI and Block OSM together if
-  you wish.
-
-  This support is also available as a module called i2o_scsi.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-I2O /proc support
-CONFIG_I2O_PROC
-  If you say Y here and to "/proc file system support", you will be
-  able to read I2O related information from the virtual directory
-  /proc/i2o.
-
-  This support is also available as a module called i2o_proc.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Plug and Play support
-CONFIG_PNP
-  Plug and Play (PnP) is a standard for peripherals which allows those
-  peripherals to be configured by software, e.g. assign IRQ's or other
-  parameters. No jumpers on the cards are needed, instead the values
-  are provided to the cards from the BIOS, from the operating system,
-  or using a user-space utility.
-
-  Say Y here if you would like Linux to configure your Plug and Play
-  devices. You should then also say Y to "ISA Plug and Play support",
-  below. Alternatively, you can say N here and configure your PnP
-  devices using the user space utilities contained in the isapnptools
-  package.
-
-  This support is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-ISA Plug and Play support
-CONFIG_ISAPNP
-  Say Y here if you would like support for ISA Plug and Play devices.
-  Some information is in <file:Documentation/isapnp.txt>.
-
-  This support is also available as a module called isapnp.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-  If unsure, say Y.
-
-PNPBIOS support
-CONFIG_PNPBIOS
-  Linux uses the PNPBIOS as defined in "Plug and Play BIOS
-  Specification Version 1.0A May 5, 1994" to autodetect built-in
-  mainboard resources (e.g. parallel port resources).
-
-  Other features (e.g. change resources, ESCD, event notification,
-  Docking station information, ISAPNP services) are not used.
-
-  Note: ACPI is expected to supersede PNPBIOS some day, currently it
-  co-exists nicely.
-
-  See latest pcmcia-cs (stand-alone package) for a nice "lspnp" tools,
-  or have a look at /proc/bus/pnp.
-
-  If unsure, say Y.
-
-Support for hot-pluggable devices
-CONFIG_HOTPLUG
-  Say Y here if you want to plug devices into your computer while
-  the system is running, and be able to use them quickly.  In many
-  cases, the devices can likewise be unplugged at any time too.
-
-  One well known example of this is PCMCIA- or PC-cards, credit-card
-  size devices such as network cards, modems or hard drives which are
-  plugged into slots found on all modern laptop computers.  Another
-  example, used on modern desktops as well as laptops, is USB.
-
-  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
-  Then your kernel will automatically call out to a user mode "policy
-  agent" (/sbin/hotplug) to load modules and set up software needed
-  to use devices as you hotplug them.
-
-PCMCIA/CardBus support
-CONFIG_PCMCIA
-  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-  computer.  These are credit-card size devices such as network cards,
-  modems or hard drives often used with laptops computers.  There are
-  actually two varieties of these cards: the older 16 bit PCMCIA cards
-  and the newer 32 bit CardBus cards.  If you want to use CardBus
-  cards, you need to say Y here and also to "CardBus support" below.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).  Please also read the PCMCIA-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  When compiled this way, there will be modules called pcmcia_core.o
-  and ds.o.  If you want to compile it as a module, say M here and
-  read <file:Documentation/modules.txt>.
-
-CardBus card and (Yenta) bridge support
-CONFIG_CARDBUS
-  CardBus is a bus mastering architecture for PC-cards, which allows
-  for 32 bit PC-cards (the original PCMCIA standard specifies only
-  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
-
-  This option enables support for CardBus PC Cards, as well as support
-  for CardBus host bridges.  Virtually all modern PCMCIA bridges are
-  CardBus compatible.  A "bridge" is the hardware inside your computer
-  that PCMCIA cards are plugged into.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).
-
-  If unsure, say Y.
-
-i82092 compatible bridge support
-CONFIG_I82092
-  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
-  found in some older laptops and more commonly in evaluation boards for the
-  chip.
-
-i82365 compatible host bridge support
-CONFIG_I82365
-  Say Y here to include support for ISA-bus PCMCIA host bridges that
-  are register compatible with the Intel i82365.  These are found on
-  older laptops and ISA-bus card readers for desktop systems.  A
-  "bridge" is the hardware inside your computer that PCMCIA cards are
-  plugged into. If unsure, say N.
-
-Databook TCIC host bridge support
-CONFIG_TCIC
-  Say Y here to include support for the Databook TCIC family of PCMCIA
-  host bridges. These are only found on a handful of old systems.
-  "Bridge" is the name used for the hardware inside your computer that
-  PCMCIA cards are plugged into. If unsure, say N.
-
-System V IPC
-CONFIG_SYSVIPC
-  Inter Process Communication is a suite of library functions and
-  system calls which let processes (running programs) synchronize and
-  exchange information. It is generally considered to be a good thing,
-  and some programs won't run unless you say Y here. In particular, if
-  you want to run the DOS emulator dosemu under Linux (read the
-  DOSEMU-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>), you'll need to say Y
-  here.
-
-  You can find documentation about IPC with "info ipc" and also in
-  section 6.4 of the Linux Programmer's Guide, available from
-  <http://www.linuxdoc.org/docs.html#guide>.
-
-BSD Process Accounting
-CONFIG_BSD_PROCESS_ACCT
-  If you say Y here, a user level program will be able to instruct the
-  kernel (via a special system call) to write process accounting
-  information to a file: whenever a process exits, information about
-  that process will be appended to the file by the kernel.  The
-  information includes things such as creation time, owning user,
-  command name, memory usage, controlling terminal etc. (the complete
-  list is in the struct acct in <file:include/linux/acct.h>).  It is
-  up to the user level program to do useful things with this
-  information.  This is generally a good idea, so say Y.
-
-Sysctl support
-CONFIG_SYSCTL
-  The sysctl interface provides a means of dynamically changing
-  certain kernel parameters and variables on the fly without requiring
-  a recompile of the kernel or reboot of the system.  The primary
-  interface consists of a system call, but if you say Y to "/proc
-  file system support", a tree of modifiable sysctl entries will be
-  generated beneath the /proc/sys directory. They are explained in the
-  files in <file:Documentation/sysctl/>.  Note that enabling this
-  option will enlarge the kernel by at least 8 KB.
-
-  As it is generally a good thing, you should say Y here unless
-  building a kernel for install/rescue disks or your system is very
-  limited in memory.
-
-# Choice: kcore
-Kernel core (/proc/kcore) format
-CONFIG_KCORE_ELF
-  If you enabled support for /proc file system then the file
-  /proc/kcore will contain the kernel core image. This can be used
-  in gdb:
-
-  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
-
-  You have two choices here: ELF and A.OUT. Selecting ELF will make
-  /proc/kcore appear in ELF core format as defined by the Executable
-  and Linking Format specification. Selecting A.OUT will choose the
-  old "a.out" format which may be necessary for some old versions
-  of binutils or on some architectures.
-
-  This is especially useful if you have compiled the kernel with the
-  "-g" option to preserve debugging information. It is mainly used
-  for examining kernel data structures on the live kernel so if you
-  don't understand what this means or are not a kernel hacker, just
-  leave it at its default value ELF.
-
-# Choice: kcore
-Select a.out format for /proc/kcore
-CONFIG_KCORE_AOUT
-  Not necessary unless you're using a very out-of-date binutils
-  version.  You probably want KCORE_ELF.
-
-Kernel support for ELF binaries
-CONFIG_BINFMT_ELF
-  ELF (Executable and Linkable Format) is a format for libraries and
-  executables used across different architectures and operating
-  systems. Saying Y here will enable your kernel to run ELF binaries
-  and enlarge it by about 13 KB. ELF support under Linux has now all
-  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
-  because it is portable (this does *not* mean that you will be able
-  to run executables from different architectures or operating systems
-  however) and makes building run-time libraries very easy. Many new
-  executables are distributed solely in ELF format. You definitely
-  want to say Y here.
-
-  Information about ELF is contained in the ELF HOWTO available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you find that after upgrading from Linux kernel 1.2 and saying Y
-  here, you still can't run any ELF binaries (they just crash), then
-  you'll have to install the newest ELF runtime libraries, including
-  ld.so (check the file <file:Documentation/Changes> for location and
-  latest version).
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called binfmt_elf.o. Saying M or N here is dangerous because
-  some crucial programs on your system might be in ELF format.
-
-Kernel support for a.out binaries
-CONFIG_BINFMT_AOUT
-  A.out (Assembler.OUTput) is a set of formats for libraries and
-  executables used in the earliest versions of UNIX. Linux used the
-  a.out formats QMAGIC and ZMAGIC until they were replaced with the
-  ELF format.
-
-  As more and more programs are converted to ELF, the use for a.out
-  will gradually diminish. If you disable this option it will reduce
-  your kernel by one page. This is not much and by itself does not
-  warrant removing support. However its removal is a good idea if you
-  wish to ensure that absolutely none of your programs will use this
-  older executable format. If you don't know what to answer at this
-  point then answer Y. If someone told you "You need a kernel with
-  QMAGIC support" then you'll have to say Y here. You may answer M to
-  compile a.out support as a module and later load the module when you
-  want to use a program or library in a.out format. The module will be
-  called binfmt_aout.o. Saying M or N here is dangerous though,
-  because some crucial programs on your system might still be in A.OUT
-  format.
-
-Kernel support for Linux/Intel ELF binaries
-CONFIG_BINFMT_EM86
-  Say Y here if you want to be able to execute Linux/Intel ELF
-  binaries just like native Alpha binaries on your Alpha machine. For
-  this to work, you need to have the emulator /usr/bin/em86 in place.
-
-  You can get the same functionality by saying N here and saying Y to
-  "Kernel support for MISC binaries".
-
-  You may answer M to compile the emulation support as a module and
-  later load the module when you want to use a Linux/Intel binary. The
-  module will be called binfmt_em86.o. If unsure, say Y.
-
-Kernel support for SOM binaries
-CONFIG_BINFMT_SOM
-  SOM is a binary executable format inherited from HP/UX.  Say Y here
-  to be able to load and execute SOM binaries directly.
-
-Kernel support for MISC binaries
-CONFIG_BINFMT_MISC
-  If you say Y here, it will be possible to plug wrapper-driven binary
-  formats into the kernel. You will like this especially when you use
-  programs that need an interpreter to run like Java, Python or
-  Emacs-Lisp. It's also useful if you often run DOS executables under
-  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>). Once you have
-  registered such a binary class with the kernel, you can start one of
-  those programs simply by typing in its name at a shell prompt; Linux
-  will automatically feed it to the correct interpreter.
-
-  You can do other nice things, too. Read the file
-  <file:Documentation/binfmt_misc.txt> to learn how to use this
-  feature, and <file:Documentation/java.txt> for information about how
-  to include Java support.
-
-  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
-  use this part of the kernel.
-
-  You may say M here for module support and later load the module when
-  you have use for it; the module is called binfmt_misc.o. If you
-  don't know what to answer at this point, say Y.
-
-Kernel support for JAVA binaries
-CONFIG_BINFMT_JAVA
-  If you say Y here, the kernel will load and execute Java J-code
-  binaries directly.  Note: this option is obsolete and scheduled for
-  removal, use CONFIG_BINFMT_MISC instead.
-
-Solaris binary emulation
-CONFIG_SOLARIS_EMUL
-  This is experimental code which will enable you to run (many)
-  Solaris binaries on your SPARC Linux machine.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called solaris.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-SUN SME environment monitoring
-CONFIG_ENVCTRL
-  Kernel support for temperature and fan monitoring on Sun SME
-  machines.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called envctrl.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-# Choice: x86
-Processor family
-CONFIG_M386
-  This is the processor type of your CPU. This information is used for
-  optimizing purposes. In order to compile a kernel that can run on
-  all x86 CPU types (albeit not optimally fast), you can specify
-  "386" here.
-
-  The kernel will not necessarily run on earlier architectures than
-  the one you have chosen, e.g. a Pentium optimized kernel will run on
-  a PPro, but not necessarily on a i486.
-
-  Here are the settings recommended for greatest speed:
-   - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-     486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-     will run on a 386 class machine.
-   - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-     SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-   - "586" for generic Pentium CPUs, possibly lacking the TSC
-     (time stamp counter) register.
-   - "Pentium-Classic" for the Intel Pentium.
-   - "Pentium-MMX" for the Intel Pentium MMX.
-   - "Pentium-Pro" for the Intel Pentium Pro/Celeron/Pentium II.
-   - "Pentium-III" for the Intel Pentium III
-     and Celerons based on the Coppermine core.
-   - "Pentium-4" for the Intel Pentium 4.
-   - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-   - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-   - "Crusoe" for the Transmeta Crusoe series.
-   - "Winchip-C6" for original IDT Winchip.
-   - "Winchip-2" for IDT Winchip 2.
-   - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-   - "CyrixIII" for VIA Cyrix III or VIA C3.
-
-  If you don't know what to do, choose "386".
-
-486
-CONFIG_M486
-  Select this for a x486 processor, ether Intel or one of the
-  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-  U5S.
-
-586/K5/5x86/6x86/6x86MX
-CONFIG_M586
-  Select this for an x586 or x686 processor such as the AMD K5, the
-  Intel 5x86 or 6x86, or the Intel 6x86MX.  This choice does not
-  assume the RDTSC instruction.
-
-Pentium Classic
-CONFIG_M586TSC
-  Select this for a Pentium Classic processor with the RDTSC (Read
-  Time Stamp Counter) instruction for benchmarking.
-
-32-bit PDC
-CONFIG_PDC_NARROW
-  Saying Y here will allow developers with a C180, C200, C240, C360,
-  J200, J210, and/or a J2240 to test 64-bit kernels by providing a
-  wrapper for the 32-bit PDC calls.  Since the machines which require
-  this option do not support over 4G of RAM, this option is targeted
-  for developers of these machines wishing to test changes on both
-  32-bit and 64-bit configurations.
-
-  If unsure, say N.
-
-VGA text console
-CONFIG_VGA_CONSOLE
-  Saying Y here will allow you to use Linux in text mode through a
-  display that complies with the generic VGA standard. Virtually
-  everyone wants that.
-
-  The program SVGATextMode can be used to utilize SVGA video cards to
-  their full potential in text mode. Download it from
-  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-  Say Y.
-
-Distribute interrupts on all CPUs by default
-CONFIG_IRQ_ALL_CPUS
-  This option gives the kernel permission to distribute IRQs across
-  multiple CPUs.  Saying N here will route all IRQs to the first
-  CPU. Generally SMP PowerMacs can answer Y. SMP IBM CHRP boxes or
-  Power3 boxes should say N for now.
-
-Video mode selection support
-CONFIG_VIDEO_SELECT
-  This enables support for text mode selection on kernel startup. If
-  you want to take advantage of some high-resolution text mode your
-  card's BIOS offers, but the traditional Linux utilities like
-  SVGATextMode don't, you can say Y here and set the mode using the
-  "vga=" option from your boot loader (lilo or loadlin) or set
-  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-  "man bootparam" or see the documentation of your boot loader about
-  how to pass options to the kernel.)
-
-  Read the file <file:Documentation/svga.txt> for more information
-  about the Video mode selection support. If unsure, say N.
-
-Support for frame buffer devices
-CONFIG_FB
-  The frame buffer device provides an abstraction for the graphics
-  hardware. It represents the frame buffer of some video hardware and
-  allows application software to access the graphics hardware through
-  a well-defined interface, so the software doesn't need to know
-  anything about the low-level (hardware register) stuff.
-
-  Frame buffer devices work identically across the different
-  architectures supported by Linux and make the implementation of
-  application programs easier and more portable; at this point, an X
-  server exists which uses the frame buffer device exclusively.
-  On several non-X86 architectures, the frame buffer device is the
-  only way to use the graphics hardware.
-
-  The device is accessed through special device nodes, usually located
-  in the /dev directory, i.e. /dev/fb*.
-
-  You need an utility program called fbset to make full use of frame
-  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-  and the Framebuffer-HOWTO at
-  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-  information.
-
-  Say Y here and to the driver for your graphics board below if you
-  are compiling a kernel for a non-x86 architecture.
-
-  If you are compiling for the x86 architecture, you can say Y if you
-  want to play with it, but it is not essential. Please note that
-  running graphical applications that directly touch the hardware
-  (e.g. an accelerated X server) and that are not frame buffer
-  device-aware may cause unexpected results. If unsure, say N.
-
-Acorn VIDC support
-CONFIG_FB_ACORN
-  This is the frame buffer device driver for the Acorn VIDC graphics
-  hardware found in Acorn RISC PCs and other ARM-based machines.  If
-  unsure, say N.
-
-Permedia2 support
-CONFIG_FB_PM2
-  This is the frame buffer device driver for the Permedia2 AGP frame
-  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
-  product page at
-  <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
-
-Enable FIFO disconnect feature
-CONFIG_FB_PM2_FIFO_DISCONNECT
-  Support the Permedia2 FIFOI disconnect feature (see CONFIG_FB_PM2).
-
-Generic Permedia2 PCI board support
-CONFIG_FB_PM2_PCI
-  Say Y to enable support for Permedia2 AGP frame buffer card from
-  3Dlabs (aka `Graphic Blaster Exxtreme') on the PCI bus.
-
-Phase5 CVisionPPC/BVisionPPC support
-CONFIG_FB_PM2_CVPPC
-  Say Y to enable support for the Amiga Phase 5 CVisionPPC BVisionPPC
-  framebuffer cards.  Phase 5 is no longer with us, alas.
-
-Amiga native chipset support
-CONFIG_FB_AMIGA
-  This is the frame buffer device driver for the builtin graphics
-  chipset found in Amigas.
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called amifb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Amiga OCS chipset support
-CONFIG_FB_AMIGA_OCS
-  This enables support for the original Agnus and Denise video chips,
-  found in the Amiga 1000 and most A500's and A2000's. If you intend
-  to run Linux on any of these systems, say Y; otherwise say N.
-
-Amiga ECS chipset support
-CONFIG_FB_AMIGA_ECS
-  This enables support for the Enhanced Chip Set, found in later
-  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
-  you intend to run Linux on any of these systems, say Y; otherwise
-  say N.
-
-Amiga AGA chipset support
-CONFIG_FB_AMIGA_AGA
-  This enables support for the Advanced Graphics Architecture (also
-  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
-  and CD32. If you intend to run Linux on any of these systems, say Y;
-  otherwise say N.
-
-Amiga CyberVision support
-CONFIG_FB_CYBER
-  This enables support for the Cybervision 64 graphics card from
-  Phase5. Please note that its use is not all that intuitive (i.e. if
-  you have any questions, be sure to ask!). Say N unless you have a
-  Cybervision 64 or plan to get one before you next recompile the
-  kernel. Please note that this driver DOES NOT support the
-  Cybervision 64 3D card, as they use incompatible video chips.
-
-CyberPro 20x0 support
-CONFIG_FB_CYBER2000
-  This enables support for the Integraphics CyberPro 20x0 and 5000
-  VGA chips used in the Rebel.com Netwinder and other machines.
-  Say Y if you have a NetWinder or a graphics card containing this
-  device, otherwise say N.
-
-Amiga CyberVision3D support
-CONFIG_FB_VIRGE
-  This enables support for the Cybervision 64/3D graphics card from
-  Phase5. Please note that its use is not all that intuitive (i.e. if
-  you have any questions, be sure to ask!). Say N unless you have a
-  Cybervision 64/3D or plan to get one before you next recompile the
-  kernel. Please note that this driver DOES NOT support the older
-  Cybervision 64 card, as they use incompatible video chips.
-
-Amiga RetinaZ3 support
-CONFIG_FB_RETINAZ3
-  This enables support for the Retina Z3 graphics card. Say N unless
-  you have a Retina Z3 or plan to get one before you next recompile
-  the kernel.
-
-Cirrus Logic generic driver
-CONFIG_FB_CLGEN
-  This enables support for Cirrus Logic GD542x/543x based boards on
-  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-
-  If you have a PCI-based system, this enables support for these
-  chips: GD-543x, GD-544x, GD-5480.
-
-  Please read the file <file:Documentation/fb/clgenfb.txt>.
-
-  Say N unless you have such a graphics board or plan to get one
-  before you next recompile the kernel.
-
-Apollo support
-CONFIG_APOLLO
-  Say Y here if you want to run Linux on an MC680x0-based Apollo
-  Domain workstation such as the DN3500.
-
-Apollo 3c505 "EtherLink Plus" support
-CONFIG_APOLLO_ELPLUS
-  Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
-  If you don't have one made for Apollos, you can use one from a PC,
-  except that your Apollo won't be able to boot from it (because the
-  code in the ROM will be for a PC).
-
-Atari native chipset support
-CONFIG_FB_ATARI
-  This is the frame buffer device driver for the builtin graphics
-  chipset found in Ataris.
-
-Amiga FrameMaster II/Rainbow II support
-CONFIG_FB_FM2
-  This is the frame buffer device driver for the Amiga FrameMaster
-  card from BSC (exhibited 1992 but not shipped as a CBM product).
-
-Open Firmware frame buffer device support
-CONFIG_FB_OF
-  Say Y if you want support with Open Firmware for your graphics
-  board.
-
-S3 Trio frame buffer device support
-CONFIG_FB_S3TRIO
-  If you have a S3 Trio say Y. Say N for S3 Virge.
-
-3Dfx Banshee/Voodoo3 display support
-CONFIG_FB_3DFX
-  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
-  chips. Say Y if you have such a graphics board.
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called tdfxfb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-nVidia Riva support
-CONFIG_FB_RIVA
-  This driver supports graphics boards with the nVidia Riva/Geforce
-  chips.
-  Say Y if you have such a graphics board.
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called rivafb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-ATI Mach64 display support
-CONFIG_FB_ATY
-  This driver supports graphics boards with the ATI Mach64 chips.
-  Say Y if you have such a graphics board.
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called atyfb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-ATI Rage128 display support
-CONFIG_FB_ATY128
-  This driver supports graphics boards with the ATI Rage128 chips.
-  Say Y if you have such a graphics board and read
-  <file:Documentation/fb/aty128fb.txt>.
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called aty128fb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Maxine (Personal DECstation) onboard framebuffer support
-CONFIG_FB_MAXINE
-  Say Y here to directly support the on-board framebuffer in the
-  Maxine (5000/20, /25, /33) version of the DECstation.  There is a
-  page dedicated to Linux on DECstations at <http://decstation.unix-ag.org/>.
-
-PMAG-BA TURBOchannel framebuffer support
-CONFIG_FB_PMAG_BA
-  Say Y here to directly support the on-board PMAG-BA framebuffer in
-  the 5000/1xx versions of the DECstation.  There is a page dedicated
-  to Linux on DECstations at <http://decstation.unix-ag.org/>.
-
-PMAGB-B TURBOchannel framebuffer support
-CONFIG_FB_PMAGB_B
-  Say Y here to directly support the on-board PMAGB-B framebuffer in
-  the 5000/1xx versions of the DECstation.  There is a page dedicated
-  to Linux on DECstations at <http://decstation.unix-ag.org/>.
-
-FutureTV PCI card
-CONFIG_ARCH_FTVPCI
-  Say Y here if you intend to run this kernel on a FutureTV (nee Nexus
-  Electronics) StrongARM PCI card.
-
-ANAKIN Vehicle Telematics Platform
-CONFIG_ARCH_ANAKIN
-  The Anakin is a StrongArm based SA110 - 2 DIN Vehicle Telematics Platform.
-  64MB SDRAM - 4 Mb Flash - Compact Flash Interface - 1 MB VRAM
-
-  On board peripherals:
-        * Front display: 400x234 16 bit TFT touchscreen
-        * External independent second screen interface
-        * CAN controller SJA1000
-        * USB host controller
-        * 6 channel video codec with hardware overlay
-        * Smartcard reader
-        * IrDa
-
-  Modules interfaced over the Multi Media Extension slots:
-        * A communication card
-                Wavecom GPRS modem
-                uBlock GPS
-                Bosch DAB module
-        * An audio card ( 4 * 40W, AC97 Codec, I2S)
-
-Altera Excalibur XA10 Dev Board
-ARCH_CAMELOT
-  This enables support for Altera's Excalibur XA10 development board.
-  If you would like to build your kernel to run on one of these boards
-  then you must say 'Y' here. Otherwise say 'N'
-
-Link-Up Systems LCD support
-CONFIG_FB_L7200
-  This driver supports the L7200 Color LCD.
-  Say Y if you want graphics support.
-
-NeoMagic display support (EXPERIMENTAL)
-CONFIG_FB_NEOMAGIC
-  This driver supports notebooks with NeoMagic PCI chips.
-  Say Y if you have such a graphics card. 
-
-  The driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called neofb.o. If you want to compile it as a
-  module, say M here and read Documentation/modules.txt.
-
-PowerMac "control" frame buffer device support
-CONFIG_FB_CONTROL
-  This driver supports a frame buffer for the graphics adapter in the
-  Power Macintosh 7300 and others.
-
-PowerMac "platinum" frame buffer device support
-CONFIG_FB_PLATINUM
-  This driver supports a frame buffer for the "platinum" graphics
-  adapter in some Power Macintoshes.
-
-PowerMac "valkyrie" frame buffer device support
-CONFIG_FB_VALKYRIE
-  This driver supports a frame buffer for the "valkyrie" graphics
-  adapter in some Power Macintoshes.
-
-Chips 65550 display support
-CONFIG_FB_CT65550
-  This is the frame buffer device driver for the Chips & Technologies
-  65550 graphics chip in PowerBooks.
-
-TGA frame buffer support
-CONFIG_FB_TGA
-  This is the frame buffer device driver for generic TGA graphic
-  cards. Say Y if you have one of those.
-
-VESA VGA graphics console
-CONFIG_FB_VESA
-  This is the frame buffer device driver for generic VESA 2.0
-  compliant graphic cards. The older VESA 1.2 cards are not supported.
-  You will get a boot time penguin logo at no additional cost. Please
-  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-
-VGA 16-color planar support
-CONFIG_FBCON_VGA_PLANES
-  This low level frame buffer console driver enable the kernel to use
-  the 16-color planar modes of the old VGA cards where the bits of
-  each pixel are separated into 4 planes.
-
-  Only answer Y here if you have a (very old) VGA card that isn't VESA
-  2 compatible.
-
-VGA 16-color graphics console
-CONFIG_FB_VGA16
-  This is the frame buffer device driver for VGA 16 color graphic
-  cards. Say Y if you have such a card.
-
-  This code is also available as a module. If you want to compile it
-  as a module ( = code which can be inserted in and removed from the
-  running kernel whenever you want), say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  vga16fb.o.
-
-Generic STI frame buffer device support
-CONFIG_FB_STI
-  STI refers to the HP "Standard Text Interface" which is a set of
-  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-  Enabling this option will implement the linux framebuffer device and
-  an fbcon color text console using calls to the STI BIOS routines.
-  The HP framebuffer device is usually planar, uses a strange memory
-  layout, and changing the plane mask to create colored pixels
-  requires a call to the STI routines, so do not expect /dev/fb to
-  actually be useful.  However, it is the best we have as far as
-  graphics on the HP chipsets due to lack of hardware level
-  documentation for the various on-board HP chipsets used in these
-  systems.  It is sufficient for basic text console functions,
-  including fonts.
-
-  You should probably enable this option, unless you are having
-  trouble getting video when booting the kernel (make sure it isn't
-  just that you are running the console on the serial port, though).
-  Really old HP boxes may not have STI, and must use the PDC BIOS
-  console or the IODC BIOS.
-
-Select other compiled-in fonts
-CONFIG_FBCON_FONTS
-  Say Y here if you would like to use fonts other than the default
-  your frame buffer console usually use.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about foreign fonts.
-
-  If unsure, say N (the default choices are safe).
-
-VGA 8x16 font
-CONFIG_FONT_8x16
-  This is the "high resolution" font for the VGA frame buffer (the one
-  provided by the VGA text console 80x25 mode.
-
-  If unsure, say Y.
-
-Support only 8 pixels wide fonts
-CONFIG_FBCON_FONTWIDTH8_ONLY
-  Answer Y here will make the kernel provide only the 8x8 fonts (these
-  are the less readable).
-
-  If unsure, say N.
-
-Sparc console 8x16 font
-CONFIG_FONT_SUN8x16
-  This is the high resolution console font for Sun machines. Say Y.
-
-Sparc console 12x22 font (not supported by all drivers)
-CONFIG_FONT_SUN12x22
-  This is the high resolution console font for Sun machines with very
-  big letters (like the letters used in the SPARC PROM). If the
-  standard font is unreadable for you, say Y, otherwise say N.
-
-VGA 8x8 font
-CONFIG_FONT_8x8
-  This is the "high resolution" font for the VGA frame buffer (the one
-  provided by the text console 80x50 (and higher) modes).
-
-  Note that this is a poor quality font. The VGA 8x16 font is quite a
-  lot more readable.
-
-  Given the resolution provided by the frame buffer device, answer N
-  here is safe.
-
-Mac console 6x11 font (not supported by all drivers)
-CONFIG_FONT_6x11
-  Small console font with Macintosh-style high-half glyphs.  Some Mac
-  framebuffer drivers don't support this one at all.
-
-Pearl (old m68k) console 8x8 font
-CONFIG_FONT_PEARL_8x8
-  Small console font with PC-style control-character and high-half
-  glyphs.
-
-Acorn console 8x8 font
-CONFIG_FONT_ACORN_8x8
-  Small console font with PC-style control characters and high-half
-  glyphs.
-
-Backward compatibility mode for Xpmac
-CONFIG_FB_COMPAT_XPMAC
-  If you use the Xpmac X server (common with mklinux), you'll need to
-  say Y here to use X. You should consider changing to XFree86 which
-  includes a server that supports the frame buffer device directly
-  (XF68_FBDev).
-
-Hercules (HGA) mono graphics support
-CONFIG_FB_HGA
-  Say Y here if you have a Hercules mono graphics card.
-
-  This driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want).
-  The module will be called hgafb.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  As this card technology is 15 years old, most people will answer N
-  here.
-
-Epson 1355 framebuffer support
-CONFIG_FB_E1355
-  Build in support for the SED1355 Epson Research Embedded RAMDAC
-  LCD/CRT Controller (since redesignated as the S1D13505) as a
-  framebuffer.  Product specs at
-  <http://www.erd.epson.com/vdc/html/products.htm>.
-
-Dreamcast Frame Buffer support
-CONFIG_FB_DC
-  Say Y here to enable support for the framebuffer on the Sega
-  Dreamcast.  This driver is also available as a module, dcfb.o.
-
-Register Base Address
-CONFIG_E1355_REG_BASE
-  Epson SED1355/S1D13505 LCD/CRT controller register base address.
-  See the manuals at
-  <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
-  discussion.
-
-Framebuffer Base Address
-CONFIG_E1355_FB_BASE
-  Epson SED1355/S1D13505 LCD/CRT controller memory base address.  See
-  the manuals at
-  <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
-  discussion.
-
-NEC PowerVR 2 display support
-CONFIG_FB_PVR2
-  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
-  run linux on your Dreamcast, you will have to say Y here.
-  This driver may or may not work on other PowerVR 2 cards, but is
-  totally untested.  Use at your own risk.  If unsure, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want).
-  The module will be called pvr2fb.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  You can pass several parameters to the driver at boot time or at
-  module load time.  The parameters look like "video=pvr2:XXX", where
-  the meaning of XXX can be found at the end of the main source file
-  (<file:drivers/video/pvr2fb.c>). Please see the file
-  <file:Documentation/fb/pvr2fb.txt>.
-
-Debug pvr2fb
-CONFIG_FB_PVR2_DEBUG
-  Say Y here if you wish for the pvr2fb driver to print out debugging
-  messages. Most people will want to say N here. If unsure, you will
-  also want to say N.
-
-Matrox unified accelerated driver
-CONFIG_FB_MATROX
-  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
-  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
-  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-  Matrox G400 or G450 card in your box. At this time, support for the
-  G100 is untested and support for G450 is highly experimental.
-
-  This driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want).
-  The module will be called matroxfb.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  You can pass several parameters to the driver at boot time or at
-  module load time. The parameters look like "video=matrox:XXX", and
-  are described in <file:Documentation/fb/matroxfb.txt>.
-
-Matrox Millennium I/II support
-CONFIG_FB_MATROX_MILLENIUM
-  Say Y here if you have a Matrox Millennium or Matrox Millennium II
-  video card. If you select "Advanced lowlevel driver options" below,
-  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
-  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
-  also use font widths different from 8.
-
-Matrox Mystique support
-CONFIG_FB_MATROX_MYSTIQUE
-  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
-  video card. If you select "Advanced lowlevel driver options" below,
-  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
-  packed pixel and 32 bpp packed pixel. You can also use font widths
-  different from 8.
-
-Matrox G100/G200/G400/G450 support
-CONFIG_FB_MATROX_G100
-  Say Y here if you have a Matrox G100, G200, G400 or G450 based
-  video card. If you select "Advanced lowlevel driver options", you
-  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
-  pixel and 32 bpp packed pixel. You can also use font widths
-  different from 8.
-
-  If you need support for G400 secondary head, you must first say Y to
-  "I2C support" and "I2C bit-banging support" in the character devices
-  section, and then to "Matrox I2C support" and "G400 second head
-  support" here in the framebuffer section.
-
-Matrox I2C support
-CONFIG_FB_MATROX_I2C
-  This drivers creates I2C buses which are needed for accessing the
-  DDC (I2C) bus present on all Matroxes, an I2C bus which
-  interconnects Matrox optional devices, like MGA-TVO on G200 and
-  G400, and the secondary head DDC bus, present on G400 only.
-
-  You can say Y or M here if you want to experiment with monitor
-  detection code. You must say Y or M here if you want to use either
-  second head of G400 or MGA-TVO on G200 or G400.
-
-  If you compile it as module, it will create a module named
-  i2c-matroxfb.o.
-
-Matrox G400 second head support
-CONFIG_FB_MATROX_MAVEN
-  WARNING !!! This support does not work with G450 !!!
-
-  Say Y or M here if you want to use a secondary head (meaning two
-  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
-  head is not compatible with accelerated XFree 3.3.x SVGA servers -
-  secondary head output is blanked while you are in X. With XFree
-  3.9.17 preview you can use both heads if you use SVGA over fbdev or
-  the fbdev driver on first head and the fbdev driver on second head.
-
-  If you compile it as module, two modules are created,
-  matroxfb_crtc2.o and matroxfb_maven.o. Matroxfb_maven is needed for
-  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
-  also load i2c-matroxfb to get it to run.
-
-  The driver starts in monitor mode and you must use the matroxset
-  tool (available at
-  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
-  PAL or NTSC or to swap primary and secondary head outputs.
-  Secondary head driver also always start in 640x480 resolution, you
-  must use fbset to change it.
-
-  Also do not forget that second head supports only 16 and 32 bpp
-  packed pixels, so it is a good idea to compile them into the kernel
-  too.  You can use only some font widths, as the driver uses generic
-  painting procedures (the secondary head does not use acceleration
-  engine).
-
-Matrox G450 second head support
-CONFIG_FB_MATROX_G450
-  Say Y or M here if you want to use a secondary head (meaning two
-  monitors in parallel) on G450.
-
-  If you compile it as module, two modules are created,
-  matroxfb_crtc2.o and matroxfb_g450.o. Both modules are needed if you
-  want two independent display devices.
-
-  The driver starts in monitor mode and currently does not support
-  output in TV modes.  You must use the matroxset tool (available
-  at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to swap
-  primary and secondary head outputs.  Secondary head driver always
-  start in 640x480 resolution and you must use fbset to change it.
-
-  Also do not forget that second head supports only 16 and 32 bpp
-  packed pixels, so it is a good idea to compile them into the kernel
-  too. You can use only some font widths, as the driver uses generic
-  painting procedures (the secondary head does not use acceleration
-  engine).
-
-Matrox unified driver multihead support
-CONFIG_FB_MATROX_MULTIHEAD
-  Say Y here if you have more than one (supported) Matrox device in
-  your computer and you want to use all of them for different monitors
-  ("multihead"). If you have only one device, you should say N because
-  the driver compiled with Y is larger and a bit slower, especially on
-  ia32 (ix86).
-
-  If you said M to "Matrox unified accelerated driver" and N here, you
-  will still be able to use several Matrox devices simultaneously:
-  insert several instances of the module matroxfb.o into the kernel
-  with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
-  for the different Matrox devices. This method is slightly faster but
-  uses 40 KB of kernel memory per Matrox card.
-
-  There is no need for enabling 'Matrox multihead support' if you have
-  only one Matrox card in the box.
-
-3Dfx Voodoo Graphics / Voodoo2 frame buffer support
-CONFIG_FB_VOODOO1
-  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
-  Voodoo2 (cvg) based graphics card.
-
-  This driver is also available as a module ( = code which can be 
-  inserted and removed from the running kernel whenever you want).
-  The module will be called sstfb.o. If you want to compile it as
-  a module, say M here and read Documentation/modules.txt.
-
-  WARNING: Do not use any application that uses the 3D engine
-  (namely glide) while using this driver.
-  Please read the file Documentation/fb/README-sstfb.txt for supported
-  options and other important info  support.
-
-MDA text console (dual-headed)
-CONFIG_MDA_CONSOLE
-  Say Y here if you have an old MDA or monochrome Hercules graphics
-  adapter in your system acting as a second head ( = video card). You
-  will then be able to use two monitors with your Linux system. Do not
-  say Y here if your MDA card is the primary card in your system; the
-  normal VGA driver will handle it.
-
-  This driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want).
-  The module will be called mdacon.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-SBUS and UPA framebuffers
-CONFIG_FB_SBUS
-  Say Y if you want support for SBUS or UPA based frame buffer device.
-
-Creator/Creator3D support
-CONFIG_FB_CREATOR
-  This is the frame buffer device driver for the Creator and Creator3D
-  graphics boards.
-
-CGsix (GX,TurboGX) support
-CONFIG_FB_CGSIX
-  This is the frame buffer device driver for the CGsix (GX, TurboGX)
-  frame buffer.
-
-BWtwo support
-CONFIG_FB_BWTWO
-  This is the frame buffer device driver for the BWtwo frame buffer.
-
-CGthree support
-CONFIG_FB_CGTHREE
-  This is the frame buffer device driver for the CGthree frame buffer.
-
-CGfourteen (SX) support
-CONFIG_FB_CGFOURTEEN
-  This is the frame buffer device driver for the CGfourteen frame
-  buffer on Desktop SPARCsystems with the SX graphics option.
-
-P9100 (Sparcbook 3 only) support
-CONFIG_FB_P9100
-  This is the frame buffer device driver for the P9100 card
-  supported on Sparcbook 3 machines.
-
-Leo (ZX) support
-CONFIG_FB_LEO
-  This is the frame buffer device driver for the SBUS-based Sun ZX
-  (leo) frame buffer cards.
-
-IGA 168x display support
-CONFIG_FB_IGA
-  This is the framebuffer device for the INTERGRAPHICS 1680 and
-  successor frame buffer cards.
-
-TCX (SS4/SS5 only) support
-CONFIG_FB_TCX
-  This is the frame buffer device driver for the TCX 24/8bit frame
-  buffer.
-
-HD64461 Frame Buffer support
-CONFIG_FB_HIT
-  This is the frame buffer device driver for the Hitachi HD64461 LCD
-  frame buffer card.
-
-SIS 630/540 display support
-CONFIG_FB_SIS
-  This is the frame buffer device driver for the SiS 630 and 640 Super
-  Socket 7 UMA cards.  Specs available at <http://www.sis.com.tw/>.
-
-SIS 630/540/730 support
-CONFIG_FB_SIS_300
-  This is the frame buffer device driver for the SiS 630 and related
-  Super Socket 7 UMA cards.  Specs available at
-  <http://www.sis.com.tw/>.
-
-SIS 315H/315 support
-CONFIG_FB_SIS_315
-  This is the frame buffer device driver for the SiS 315 graphics
-  card.  Specs available at <http://www.sis.com.tw/>.
-
-IMS Twin Turbo display support
-CONFIG_FB_IMSTT
-  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
-  many Macintosh and compatible computers.
-
-Virtual Frame Buffer support (ONLY FOR TESTING!)
-CONFIG_FB_VIRTUAL
-  This is a `virtual' frame buffer device. It operates on a chunk of
-  unswappable kernel memory instead of on the memory of a graphics
-  board. This means you cannot see any output sent to this frame
-  buffer device, while it does consume precious memory. The main use
-  of this frame buffer device is testing and debugging the frame
-  buffer subsystem. Do NOT enable it for normal systems! To protect
-  the innocent, it has to be enabled explicitly at boot time using the
-  kernel option `video=vfb:'.
-
-  This driver is also available as a module ( = code which can be
-  inserted and removed from the running kernel whenever you want). The
-  module will be called vfb.o. If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-Mach64 CT/VT/GT/LT (incl. 3D RAGE) support
-CONFIG_FB_ATY_CT
-  Say Y here to support use of ATI's 64-bit Rage boards (or other
-  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
-  framebuffer device.  The ATI product support page for these boards
-  is at <http://support.ati.com/products/pc/mach64/>.
-
-Sony Vaio Picturebook laptop LCD panel support
-CONFIG_FB_ATY_CT_VAIO_LCD
-  Say Y here if you want to use the full width of the Sony Vaio 
-  Picturebook laptops LCD panels (you will get a 128x30 console).
-
-  Note that you need to activate this mode using the 'vga=0x301'
-  option from your boot loader (lilo or loadlin).  See the
-  documentation of your boot loader about how to pass options to the
-  kernel.
-  
-Mach64 GX support
-CONFIG_FB_ATY_GX
-  Say Y here to support use of the ATI Mach64 Graphics Expression
-  board (or other boards based on the Mach64 GX chipset) as a
-  framebuffer device.  The ATI product support page for these boards
-  is at
-  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-
-ATI Radeon display support
-CONFIG_FB_RADEON
-  Choose this option if you want to use an ATI Radeon graphics card as
-  a framebuffer device.  There are both PCI and AGP versions.  You
-  don't need to choose this to run the Radeon in plain VGA mode.
-  There is a product page at
-  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
-SA-1100 LCD support
-CONFIG_FB_SA1100
-  This is a framebuffer device for the SA-1100 LCD Controller.
-  See <http://www.linux-fbdev.org/> for information on framebuffer
-  devices.
-
-  If you plan to use the LCD display with your SA-1100 system, say
-  Y here.
-
-Advanced low level driver options
-CONFIG_FBCON_ADVANCED
-  The frame buffer console uses character drawing routines that are
-  tailored to the specific organization of pixels in the memory of
-  your graphics hardware. These are called the low level frame buffer
-  console drivers. Note that they are used for text console output
-  only; they are NOT needed for graphical applications.
-
-  If you say N here, the needed low level drivers are automatically
-  enabled, depending on what frame buffer devices you selected above.
-  This is recommended for most users.
-
-  If you say Y here, you have more fine-grained control over which low
-  level drivers are enabled. You can e.g. leave out low level drivers
-  for color depths you do not intend to use for text consoles.
-
-  Low level frame buffer console drivers can be modules ( = code which
-  can be inserted and removed from the running kernel whenever you
-  want). The modules will be called fbcon-*.o. If you want to compile
-  (some of) them as modules, read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-Monochrome support
-CONFIG_FBCON_MFB
-  This is the low level frame buffer console driver for monochrome
-  (2 colors) packed pixels.
-
-2 bpp packed pixels support
-CONFIG_FBCON_CFB2
-  This is the low level frame buffer console driver for 2 bits per
-  pixel (4 colors) packed pixels.
-
-4 bpp packed pixels support
-CONFIG_FBCON_CFB4
-  This is the low level frame buffer console driver for 4 bits per
-  pixel (16 colors) packed pixels.
-
-8 bpp packed pixels support
-CONFIG_FBCON_CFB8
-  This is the low level frame buffer console driver for 8 bits per
-  pixel (256 colors) packed pixels.
-
-16 bpp packed pixels support
-CONFIG_FBCON_CFB16
-  This is the low level frame buffer console driver for 15 or 16 bits
-  per pixel (32K or 64K colors, also known as `hicolor') packed
-  pixels.
-
-24 bpp packed pixels support
-CONFIG_FBCON_CFB24
-  This is the low level frame buffer console driver for 24 bits per
-  pixel (16M colors, also known as `truecolor') packed pixels. It is
-  NOT for `sparse' 32 bits per pixel mode.
-
-32 bpp packed pixels support
-CONFIG_FBCON_CFB32
-  This is the low level frame buffer console driver for 32 bits per
-  pixel (16M colors, also known as `truecolor') sparse packed pixels.
-
-Amiga bitplanes support
-CONFIG_FBCON_AFB
-  This is the low level frame buffer console driver for 1 to 8
-  bitplanes (2 to 256 colors) on Amiga.
-
-Amiga interleaved bitplanes support
-CONFIG_FBCON_ILBM
-  This is the low level frame buffer console driver for 1 to 8
-  interleaved bitplanes (2 to 256 colors) on Amiga.
-
-Atari interleaved bitplanes (2 planes) support
-CONFIG_FBCON_IPLAN2P2
-  This is the low level frame buffer console driver for 2 interleaved
-  bitplanes (4 colors) on Atari.
-
-Atari interleaved bitplanes (4 planes) support
-CONFIG_FBCON_IPLAN2P4
-  This is the low level frame buffer console driver for 4 interleaved
-  bitplanes (16 colors) on Atari.
-
-Atari interleaved bitplanes (8 planes) support
-CONFIG_FBCON_IPLAN2P8
-  This is the low level frame buffer console driver for 8 interleaved
-  bitplanes (256 colors) on Atari.
-
-Mac variable bpp packed pixels support
-CONFIG_FBCON_MAC
-  This is the low level frame buffer console driver for 1/2/4/8/16/32
-  bits per pixel packed pixels on Mac. It supports variable font
-  widths for low resolution screens.
-
-HGA monochrome support
-CONFIG_FBCON_HGA
-  This is the low level frame buffer console driver for Hercules mono
-  graphics cards.
-
-VGA characters/attributes support
-CONFIG_FBCON_VGA
-  This is the low level frame buffer console driver for VGA text mode;
-  it is used by frame buffer device drivers that support VGA text
-  mode.
-
-Parallel-port support
-CONFIG_PARPORT
-  If you want to use devices connected to your machine's parallel port
-  (the connector at the computer with 25 holes), e.g. printer, ZIP
-  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
-  create a mini network by connecting the parallel ports of two local
-  machines) etc., then you need to say Y here; please read
-  <file:Documentation/parport.txt> and
-  <file:drivers/parport/BUGS-parport>.
-
-  For extensive information about drivers for many devices attaching
-  to the parallel port see <http://www.torque.net/linux-pp.html> on
-  the WWW.
-
-  It is possible to share a single parallel port among several devices
-  and it is safe to compile all the corresponding drivers into the
-  kernel.  If you want to compile parallel port support as a module
-  ( = code which can be inserted in and removed from the running
-  kernel whenever you want), say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  parport.o.  If you have more than one parallel port and want to
-  specify which port and IRQ to be used by this driver at module load
-  time, take a look at <file:Documentation/parport.txt>.
-
-  If unsure, say Y.
-
-PC-style hardware
-CONFIG_PARPORT_PC
-  You should say Y here if you have a PC-style parallel port. All IBM
-  PC compatible computers and some Alphas have PC-style parallel
-  ports.
-
-  This code is also available as a module.  If you want to compile it
-  as a module ( = code which can be inserted in and removed from the
-  running kernel whenever you want), say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  parport_pc.o.
-
-  If unsure, say Y.
-
-Parallel+serial PCI card support
-CONFIG_PARPORT_SERIAL
-  This adds support for multi-IO PCI cards that have parallel and
-  serial ports.  You should say Y or M here.  If you say M, the module
-  will be called parport_serial.o.
-
-Use FIFO/DMA if available
-CONFIG_PARPORT_PC_FIFO
-  Many parallel port chipsets provide hardware that can speed up
-  printing. Say Y here if you want to take advantage of that.
-
-  As well as actually having a FIFO, or DMA capability, the kernel
-  will need to know which IRQ the parallel port has.  By default,
-  parallel port interrupts will not be used, and so neither will the
-  FIFO.  See <file:Documentation/parport.txt> to find out how to
-  specify which IRQ/DMA to use.
-
-SuperIO chipset support
-CONFIG_PARPORT_PC_SUPERIO
-  Saying Y here enables some probes for Super-IO chipsets in order to
-  find out things like base addresses, IRQ lines and DMA channels.  It
-  is safe to say N.
-
-Support for PCMCIA management for PC-style ports
-CONFIG_PARPORT_PC_PCMCIA
-  Say Y here if you need PCMCIA support for your PC-style parallel
-  ports. If unsure, say N.
-
-Support foreign hardware
-CONFIG_PARPORT_OTHER
-  Say Y here if you want to be able to load driver modules to support
-  other non-standard types of parallel ports. This causes a
-  performance loss, so most people say N.
-
-Amiga built-in parallel port support
-CONFIG_PARPORT_AMIGA
-  Say Y here if you need support for the parallel port hardware on
-  Amiga machines. This code is also available as a module (say M),
-  called parport_amiga.o. If in doubt, saying N is the safe plan.
-
-Atari built-in parallel port support
-CONFIG_PARPORT_ATARI
-  Say Y here if you need support for the parallel port hardware on
-  Atari machines. This code is also available as a module (say M),
-  called parport_atari.o. If in doubt, saying N is the safe plan.
-
-Multiface III parallel port support
-CONFIG_PARPORT_MFC3
-  Say Y here if you need parallel port support for the MFC3 card.
-  This code is also available as a module (say M), called
-  parport_mfc3.o. If in doubt, saying N is the safe plan.
-
-Support IEEE 1284 status readback
-CONFIG_PRINTER_READBACK
-  If you have a device on your parallel port that support this
-  protocol, this option will allow the device to report its status. It
-  is safe to say Y.
-
-IEEE 1284 transfer modes
-CONFIG_PARPORT_1284
-  If you have a printer that supports status readback or device ID, or
-  want to use a device that uses enhanced parallel port transfer modes
-  such as EPP and ECP, say Y here to enable advanced IEEE 1284
-  transfer modes. Also say Y if you want device ID information to
-  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
-
-Enable loadable module support
-CONFIG_MODULES
-  Kernel modules are small pieces of compiled code which can be
-  inserted in or removed from the running kernel, using the programs
-  insmod and rmmod. This is described in the file
-  <file:Documentation/modules.txt>, including the fact that you have
-  to say "make modules" in order to compile the modules that you chose
-  during kernel configuration.  Modules can be device drivers, file
-  systems, binary executable formats, and so on. If you think that you
-  may want to make use of modules with this kernel in the future, then
-  say Y here.  If unsure, say Y.
-
-Set version information on all symbols for modules
-CONFIG_MODVERSIONS
-  Usually, modules have to be recompiled whenever you switch to a new
-  kernel.  Saying Y here makes it possible, and safe, to use the
-  same modules even after compiling a new kernel; this requires the
-  program modprobe. All the software needed for module support is in
-  the modutils package (check the file <file:Documentation/Changes>
-  for location and latest version).  NOTE: if you say Y here but don't
-  have the program genksyms (which is also contained in the above
-  mentioned modutils package), then the building of your kernel will
-  fail.  If you are going to use modules that are generated from
-  non-kernel sources, you would benefit from this option.  Otherwise
-  it's not that important.  So, N ought to be a safe bet.
-
-Kernel module loader support
-CONFIG_KMOD
-  Normally when you have selected some drivers and/or file systems to
-  be created as loadable modules, you also have the responsibility to
-  load the corresponding modules (using the programs insmod or
-  modprobe) before you can use them. If you say Y here however, the
-  kernel will be able to load modules for itself: when a part of the
-  kernel needs a module, it runs modprobe with the appropriate
-  arguments, thereby loading the module if it is available. (This is a
-  replacement for kerneld.) Say Y here and read about configuring it
-  in <file:Documentation/kmod.txt>.
-
-ARP daemon support
-CONFIG_ARPD
-  Normally, the kernel maintains an internal cache which maps IP
-  addresses to hardware addresses on the local network, so that
-  Ethernet/Token Ring/ etc. frames are sent to the proper address on
-  the physical networking layer. For small networks having a few
-  hundred directly connected hosts or less, keeping this address
-  resolution (ARP) cache inside the kernel works well. However,
-  maintaining an internal ARP cache does not work well for very large
-  switched networks, and will use a lot of kernel memory if TCP/IP
-  connections are made to many machines on the network.
-
-  If you say Y here, the kernel's internal ARP cache will never grow
-  to more than 256 entries (the oldest entries are expired in a LIFO
-  manner) and communication will be attempted with the user space ARP
-  daemon arpd. Arpd then answers the address resolution request either
-  from its own cache or by asking the net.
-
-  This code is experimental and also obsolete. If you want to use it,
-  you need to find a version of the daemon arpd on the net somewhere,
-  and you should also say Y to "Kernel/User network link driver",
-  below. If unsure, say N.
-
-TCP/IP networking
-CONFIG_INET
-  These are the protocols used on the Internet and on most local
-  Ethernets. It is highly recommended to say Y here (this will enlarge
-  your kernel by about 144 KB), since some programs (e.g. the X window
-  system) use TCP/IP even if your machine is not connected to any
-  other computer. You will get the so-called loopback device which
-  allows you to ping yourself (great fun, that!).
-
-  For an excellent introduction to Linux networking, please read the
-  NET-3-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This option is also necessary if you want to use the full power of
-  term (term is a program which gives you almost full Internet
-  connectivity if you have a regular dial up shell account on some
-  Internet connected Unix computer; for more information, read
-  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-  If you say Y here and also to "/proc file system support" and
-  "Sysctl support" below, you can change various aspects of the
-  behavior of the TCP/IP code by writing to the (virtual) files in
-  /proc/sys/net/ipv4/*; the options are explained in the file
-  <file:Documentation/networking/ip-sysctl.txt>.
-
-  Short answer: say Y.
-
-IP multicasting
-CONFIG_IP_MULTICAST
-  This is code for addressing several networked computers at once,
-  enlarging your kernel by about 2 KB. You need multicasting if you
-  intend to participate in the MBONE, a high bandwidth network on top
-  of the Internet which carries audio and video broadcasts. More
-  information about the MBONE is on the WWW at
-  <http://www-itg.lbl.gov/mbone/>. Information about the multicast
-  capabilities of the various network cards is contained in
-  <file:Documentation/networking/multicast.txt>. For most people, it's
-  safe to say N.
-
-Advanced router
-CONFIG_IP_ADVANCED_ROUTER
-  If you intend to run your Linux box mostly as a router, i.e. as a
-  computer that forwards and redistributes network packets, say Y; you
-  will then be presented with several options that allow more precise
-  control about the routing process.
-
-  The answer to this question won't directly affect the kernel:
-  answering N will just cause the configurator to skip all the
-  questions about advanced routing.
-
-  Note that your box can only act as a router if you enable IP
-  forwarding in your kernel; you can do that by saying Y to "/proc
-  file system support" and "Sysctl support" below and executing the
-  line
-
-    echo "1" > /proc/sys/net/ipv4/ip_forward
-
-  at boot time after the /proc file system has been mounted.
-
-  If you turn on IP forwarding, you will also get the rp_filter, which
-  automatically rejects incoming packets if the routing table entry
-  for their source address doesn't match the network interface they're
-  arriving on. This has security advantages because it prevents the
-  so-called IP spoofing, however it can pose problems if you use
-  asymmetric routing (packets from you to a host take a different path
-  than packets from that host to you) or if you operate a non-routing
-  host which has several IP addresses on different interfaces. To turn
-  rp_filter off use:
-
-        echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter
-  or
-        echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
-
-  If unsure, say N here.
-
-Policy routing
-CONFIG_IP_MULTIPLE_TABLES
-  Normally, a router decides what to do with a received packet based
-  solely on the packet's final destination address. If you say Y here,
-  the Linux router will also be able to take the packet's source
-  address into account. Furthermore, if you also say Y to "Use TOS
-  value as routing key" below, the TOS (Type-Of-Service) field of the
-  packet can be used for routing decisions as well. In addition, if
-  you say Y here and to "Fast network address translation" below,
-  the router will also be able to modify source and destination
-  addresses of forwarded packets.
-
-  If you are interested in this, please see the preliminary
-  documentation at <http://www.compendium.com.ar/policy-routing.txt>
-  and <ftp://post.tepkom.ru/pub/vol2/Linux/docs/advanced-routing.tex>.
-  You will need supporting software from
-  <ftp://ftp.inr.ac.ru/ip-routing/>.
-
-  If unsure, say N.
-
-Equal cost multipath
-CONFIG_IP_ROUTE_MULTIPATH
-  Normally, the routing tables specify a single action to be taken in
-  a deterministic manner for a given packet. If you say Y here
-  however, it becomes possible to attach several actions to a packet
-  pattern, in effect specifying several alternative paths to travel
-  for those packets. The router considers all these paths to be of
-  equal "cost" and chooses one of them in a non-deterministic fashion
-  if a matching packet arrives.
-
-Use TOS value as routing key
-CONFIG_IP_ROUTE_TOS
-  The header of every IP packet carries a TOS (Type Of Service) value
-  with which the packet requests a certain treatment, e.g. low
-  latency (for interactive traffic), high throughput, or high
-  reliability.  If you say Y here, you will be able to specify
-  different routes for packets with different TOS values.
-
-Use netfilter MARK value as routing key
-CONFIG_IP_ROUTE_FWMARK
-  If you say Y here, you will be able to specify different routes for
-  packets with different mark values (see iptables(8), MARK target).
-
-Verbose route monitoring
-CONFIG_IP_ROUTE_VERBOSE
-  If you say Y here, which is recommended, then the kernel will print
-  verbose messages regarding the routing, for example warnings about
-  received packets which look strange and could be evidence of an
-  attack or a misconfigured system somewhere. The information is
-  handled by the klogd daemon which is responsible for kernel messages
-  ("man klogd").
-
-Large routing tables
-CONFIG_IP_ROUTE_LARGE_TABLES
-  If you have routing zones that grow to more than about 64 entries,
-  you may want to say Y here to speed up the routing process.
-
-Fast network address translation
-CONFIG_IP_ROUTE_NAT
-  If you say Y here, your router will be able to modify source and
-  destination addresses of packets that pass through it, in a manner
-  you specify.  General information about Network Address Translation
-  can be gotten from the document
-  <http://www.csn.tu-chemnitz.de/~mha/linux-ip-nat/diplom/nat.html>.
-
-Kernel level IP autoconfiguration
-CONFIG_IP_PNP
-  This enables automatic configuration of IP addresses of devices and
-  of the routing table during kernel boot, based on either information
-  supplied on the kernel command line or by BOOTP or RARP protocols.
-  You need to say Y only for diskless machines requiring network
-  access to boot (in which case you want to say Y to "Root file system
-  on NFS" as well), because all other machines configure the network
-  in their startup scripts.
-
-BOOTP support
-CONFIG_IP_PNP_BOOTP
-  If you want your Linux box to mount its whole root file system (the
-  one containing the directory /) from some other computer over the
-  net via NFS and you want the IP address of your computer to be
-  discovered automatically at boot time using the BOOTP protocol (a
-  special protocol designed for doing this job), say Y here. In case
-  the boot ROM of your network card was designed for booting Linux and
-  does BOOTP itself, providing all necessary information on the kernel
-  command line, you can say N here. If unsure, say Y. Note that if you
-  want to use BOOTP, a BOOTP server must be operating on your network.
-  Read <file:Documentation/nfsroot.txt> for details.
-
-DHCP support
-CONFIG_IP_PNP_DHCP
-  If you want your Linux box to mount its whole root file system (the
-  one containing the directory /) from some other computer over the
-  net via NFS and you want the IP address of your computer to be
-  discovered automatically at boot time using the DHCP protocol (a
-  special protocol designed for doing this job), say Y here. In case
-  the boot ROM of your network card was designed for booting Linux and
-  does DHCP itself, providing all necessary information on the kernel
-  command line, you can say N here.
-
-  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
-  must be operating on your network.  Read
-  <file:Documentation/nfsroot.txt> for details.
-
-RARP support
-CONFIG_IP_PNP_RARP
-  If you want your Linux box to mount its whole root file system (the
-  one containing the directory /) from some other computer over the
-  net via NFS and you want the IP address of your computer to be
-  discovered automatically at boot time using the RARP protocol (an
-  older protocol which is being obsoleted by BOOTP and DHCP), say Y
-  here. Note that if you want to use RARP, a RARP server must be
-  operating on your network. Read <file:Documentation/nfsroot.txt> for
-  details.
-
-IP tunneling
-CONFIG_NET_IPIP
-  Tunneling means encapsulating data of one protocol type within
-  another protocol and sending it over a channel that understands the
-  encapsulating protocol. This particular tunneling driver implements
-  encapsulation of IP within IP, which sounds kind of pointless, but
-  can be useful if you want to make your (or some other) machine
-  appear on a different network than it physically is, or to use
-  mobile-IP facilities (allowing laptops to seamlessly move between
-  networks without changing their IP addresses; check out
-  <http://anchor.cs.binghamton.edu/~mobileip/LJ/index.html>).
-
-  Saying Y to this option will produce two modules ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want). Most people won't need this and can say N.
-
-GRE tunnels over IP
-CONFIG_NET_IPGRE
-  Tunneling means encapsulating data of one protocol type within
-  another protocol and sending it over a channel that understands the
-  encapsulating protocol. This particular tunneling driver implements
-  GRE (Generic Routing Encapsulation) and at this time allows
-  encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
-  This driver is useful if the other endpoint is a Cisco router: Cisco
-  likes GRE much better than the other Linux tunneling driver ("IP
-  tunneling" above). In addition, GRE allows multicast redistribution
-  through the tunnel.
-
-Broadcast GRE over IP
-CONFIG_NET_IPGRE_BROADCAST
-  One application of GRE/IP is to construct a broadcast WAN (Wide Area
-  Network), which looks like a normal Ethernet LAN (Local Area
-  Network), but can be distributed all over the Internet. If you want
-  to do that, say Y here and to "IP multicast routing" below.
-
-IP multicast routing
-CONFIG_IP_MROUTE
-  This is used if you want your machine to act as a router for IP
-  packets that have several destination addresses. It is needed on the
-  MBONE, a high bandwidth network on top of the Internet which carries
-  audio and video broadcasts. In order to do that, you would most
-  likely run the program mrouted. Information about the multicast
-  capabilities of the various network cards is contained in
-  <file:Documentation/networking/multicast.txt>. If you haven't heard
-  about it, you don't need it.
-
-PIM-SM version 1 support
-CONFIG_IP_PIMSM_V1
-  Kernel side support for Sparse Mode PIM (Protocol Independent
-  Multicast) version 1. This multicast routing protocol is used widely
-  because Cisco supports it. You need special software to use it
-  (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more
-  information about PIM.
-
-  Say Y if you want to use PIM-SM v1. Note that you can say N here if
-  you just want to use Dense Mode PIM.
-
-PIM-SM version 2 support
-CONFIG_IP_PIMSM_V2
-  Kernel side support for Sparse Mode PIM version 2. In order to use
-  this, you need an experimental routing daemon supporting it (pimd or
-  gated-5). This routing protocol is not used widely, so say N unless
-  you want to play with it.
-
-Unix domain sockets
-CONFIG_UNIX
-  If you say Y here, you will include support for Unix domain sockets;
-  sockets are the standard Unix mechanism for establishing and
-  accessing network connections.  Many commonly used programs such as
-  the X Window system and syslog use these sockets even if your
-  machine is not connected to any network.  Unless you are working on
-  an embedded system or something similar, you therefore definitely
-  want to say Y here.
-
-  However, the socket support is also available as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>. The module will be
-  called unix.o.  If you try building this as a module and you have
-  said Y to "Kernel module loader support" above, be sure to add
-  'alias net-pf-1 unix' to your /etc/modules.conf file. Note that
-  several important services won't work correctly if you say M here
-  and then neglect to load the module.
-
-  Say Y unless you know what you are doing.
-
-The IPv6 protocol
-CONFIG_IPV6
-  This is experimental support for the next version of the Internet
-  Protocol: IP version 6 (also called IPng "IP next generation").
-  Features of this new protocol include: expanded address space,
-  authentication and privacy, and seamless interoperability with the
-  current version of IP (IP version 4). For general information about
-  IPv6, see <http://playground.sun.com/pub/ipng/html/ipng-main.html>;
-  for specific information about IPv6 under Linux read the HOWTO at
-  <http://www.bieringer.de/linux/IPv6/> and the file net/ipv6/README
-  in the kernel source.
-
-  If you want to use IPv6, please upgrade to the newest net-tools as
-  given in <file:Documentation/Changes>. You will still be able to do
-  regular IPv4 networking as well.
-
-  This protocol support is also available as a module ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want). The module will be called ipv6.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  It is safe to say N here for now.
-
-IPv6: routing messages via old netlink
-CONFIG_IPV6_NETLINK
-  You can say Y here to receive routing messages from the IPv6 code
-  through the old netlink interface. However, a better option is to
-  say Y to "Kernel/User network link driver" and to "Routing
-  messages" instead.
-
-Kernel httpd acceleration
-CONFIG_KHTTPD
-  The kernel httpd acceleration daemon (kHTTPd) is a (limited) web
-  server built into the kernel. It is limited since it can only serve
-  files from the file system and cannot deal with executable content
-  such as CGI scripts. Serving files is sped up if you use kHTTPd.
-  If kHTTPd is not able to fulfill a request, it can transparently
-  pass it through to a user space web server such as apache.
-
-  Saying "M" here builds the kHTTPd module; this is NOT enough to have
-  a working kHTTPd. For safety reasons, the module has to be activated
-  by doing a "echo 1 > /proc/sys/net/khttpd/start" after inserting the
-  module.
-
-  Before using this, read the README in net/khttpd !
-
-  The kHTTPd is experimental. Be careful when using it on a production
-  machine. Also note that kHTTPd doesn't support virtual servers yet.
-
-The IPX protocol
-CONFIG_IPX
-  This is support for the Novell networking protocol, IPX, commonly
-  used for local networks of Windows machines.  You need it if you
-  want to access Novell NetWare file or print servers using the Linux
-  Novell client ncpfs (available from
-  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
-  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>).  In order
-  to do the former, you'll also have to say Y to "NCP file system
-  support", below.
-
-  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
-  is similar to TCP. There is also experimental support for SPX in
-  Linux (see "SPX networking", below).
-
-  To turn your Linux box into a fully featured NetWare file server and
-  IPX router, say Y here and fetch either lwared from
-  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
-  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
-  information, read the IPX-HOWTO available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  General information about how to connect Linux, Windows machines and
-  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-  The IPX driver would enlarge your kernel by about 16 KB. This driver
-  is also available as a module ( = code which can be inserted in and
-  removed from the running kernel whenever you want).  The module will
-  be called ipx.o.  If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.  Unless you want to
-  integrate your Linux box with a local Novell network, say N.
-
-Full internal IPX network
-CONFIG_IPX_INTERN
-  Every IPX network has an address that identifies it. Sometimes it is
-  useful to give an IPX "network" address to your Linux box as well
-  (for example if your box is acting as a file server for different
-  IPX networks: it will then be accessible from everywhere using the
-  same address). The way this is done is to create a virtual internal
-  "network" inside your box and to assign an IPX address to this
-  network. Say Y here if you want to do this; read the IPX-HOWTO at
-  <http://www.linuxdoc.org/docs.html#howto> for details.
-
-  The full internal IPX network enables you to allocate sockets on
-  different virtual nodes of the internal network. This is done by
-  evaluating the field sipx_node of the socket address given to the
-  bind call. So applications should always initialize the node field
-  to 0 when binding a socket on the primary network. In this case the
-  socket is assigned the default node that has been given to the
-  kernel when the internal network was created. By enabling the full
-  internal IPX network the cross-forwarding of packets targeted at
-  'special' sockets to sockets listening on the primary network is
-  disabled. This might break existing applications, especially RIP/SAP
-  daemons. A RIP/SAP daemon that works well with the full internal net
-  can be found on <ftp://ftp.gwdg.de/pub/linux/misc/ncpfs/>.
-
-  If you don't know what you are doing, say N.
-
-#(We're told this will come back someday)
-
-SPX networking
-CONFIG_SPX
-  * Orphaned entry retained 20 April 2001 by Petr Vandrovec     *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  The Sequenced Packet eXchange protocol is a transport layer protocol
-  built on top of IPX. It is used in Novell NetWare systems for
-  client-server applications and is similar to TCP (which runs on top
-  of IP).
-
-  Note that Novell NetWare file sharing does not use SPX; it uses a
-  protocol called NCP, for which separate Linux support is available
-  ("NCP file system support" below for the client side, and the user
-  space programs lwared or mars_nwe for the server side).
-
-  Say Y here if you have use for SPX; read the IPX-HOWTO at
-  <http://www.linuxdoc.org/docs.html#howto> for details.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called af_spx.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-DECnet networking
-CONFIG_DECNET
-  The DECnet networking protocol was used in many products made by
-  Digital (now Compaq).  It provides reliable stream and sequenced
-  packet communications over which run a variety of services similar
-  to those which run over TCP/IP.
-
-  To find some tools to use with the kernel layer support, please
-  look at Patrick Caulfield's web site:
-  <http://linux.dreamtime.org/decnet/>.
-
-  More detailed documentation is available in
-  <file:Documentation/networking/decnet.txt>.
-
-  Be sure to say Y to "/proc file system support" and "Sysctl support"
-  below when using DECnet, since you will need sysctl support to aid
-  in configuration at run time.
-
-  The DECnet code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called decnet.o.
-
-DECnet SIOCFIGCONF support
-CONFIG_DECNET_SIOCGIFCONF
-  This option should only be turned on if you are really sure that
-  you know what you are doing. It can break other applications which
-  use this system call and the proper way to get the information
-  provided by this call is to use rtnetlink.
-
-  If unsure, say N.
-
-DECnet router support
-CONFIG_DECNET_ROUTER
-  Add support for turning your DECnet Endnode into a level 1 or 2
-  router.  This is an unfinished option for developers only.  If you
-  do say Y here, then make sure that you also say Y to "Kernel/User
-  network link driver", "Routing messages" and "Network packet
-  filtering".  The first two are required to allow configuration via
-  rtnetlink (currently you need Alexey Kuznetsov's iproute2 package
-  from <ftp://ftp.inr.ac.ru/>). The "Network packet filtering" option
-  will be required for the forthcoming routing daemon to work.
-
-  See <file:Documentation/networking/decnet.txt> for more information.
-
-Use FWMARK value as DECnet routing key
-CONFIG_DECNET_ROUTE_FWMARK
-  If you say Y here, you will be able to specify different routes for
-  packets with different FWMARK ("firewalling mark") values
-  (see ipchains(8), "-m" argument).
-
-AppleTalk interfaces support
-CONFIG_APPLETALK
-  AppleTalk is the way Apple computers speak to each other on a
-  network. If your Linux box is connected to such a network and you
-  want to join the conversation, say Y.
-
-AppleTalk protocol support
-CONFIG_ATALK
-  AppleTalk is the way Apple computers speak to each other on a
-  network.  If your Linux box is connected to such a network and you
-  want to join the conversation, say Y.  You will need to use the
-  netatalk package so that your Linux box can act as a print and file
-  server for Macs as well as access AppleTalk printers.  Check out
-  <http://www.zettabyte.net/netatalk/> on the WWW for details.
-  EtherTalk is the name used for AppleTalk over Ethernet and the
-  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
-  network using serial links.  EtherTalk and LocalTalk are fully
-  supported by Linux.
-
-  General information about how to connect Linux, Windows machines and
-  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
-  NET-3-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
-  information as well.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called appletalk.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  You
-  almost certainly want to compile it as a module so you can restart
-  your AppleTalk stack without rebooting your machine.  I hear that
-  the GNU boycott of Apple is over, so even politically correct people
-  are allowed to say Y here.
-
-AppleTalk-IP driver support
-CONFIG_IPDDP
-  This allows IP networking for users who only have AppleTalk
-  networking available. This feature is experimental. With this
-  driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux
-  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
-  you want your Linux box to act as an Internet gateway for a zoo of
-  AppleTalk connected Macs). Please see the file
-  <file:Documentation/networking/ipddp.txt> for more information.
-
-  If you say Y here, the AppleTalk-IP support will be compiled into
-  the kernel. In this case, you can either use encapsulation or
-  decapsulation, but not both. With the following two questions, you
-  decide which one you want.
-
-  If you say M here, the AppleTalk-IP support will be compiled as a
-  module ( = code which can be inserted in and removed from the
-  running kernel whenever you want, read
-  <file:Documentation/modules.txt>).  The module is called ipddp.o.
-  In this case, you will be able to use both encapsulation and
-  decapsulation simultaneously, by loading two copies of the module
-  and specifying different values for the module option ipddp_mode.
-
-IP to AppleTalk-IP Encapsulation support
-CONFIG_IPDDP_ENCAP
-  If you say Y here, the AppleTalk-IP code will be able to encapsulate
-  IP packets inside AppleTalk frames; this is useful if your Linux box
-  is stuck on an AppleTalk network (which hopefully contains a
-  decapsulator somewhere). Please see
-  <file:Documentation/networking/ipddp.txt> for more information. If
-  you said Y to "AppleTalk-IP driver support" above and you say Y
-  here, then you cannot say Y to "AppleTalk-IP to IP Decapsulation
-  support", below.
-
-AppleTalk-IP to IP Decapsulation support
-CONFIG_IPDDP_DECAP
-  If you say Y here, the AppleTalk-IP code will be able to decapsulate
-  AppleTalk-IP frames to IP packets; this is useful if you want your
-  Linux box to act as an Internet gateway for an AppleTalk network.
-  Please see <file:Documentation/networking/ipddp.txt> for more
-  information.  If you said Y to "AppleTalk-IP driver support" above
-  and you say Y here, then you cannot say Y to "IP to AppleTalk-IP
-  Encapsulation support", above.
-
-Apple/Farallon LocalTalk PC card support
-CONFIG_LTPC
-  This allows you to use the AppleTalk PC card to connect to LocalTalk
-  networks. The card is also known as the Farallon PhoneNet PC card.
-  If you are in doubt, this card is the one with the 65C02 chip on it.
-  You also need version 1.3.3 or later of the netatalk package.
-  This driver is experimental, which means that it may not work.
-  See the file <file:Documentation/networking/ltpc.txt>.
-
-COPS LocalTalk PC card support
-CONFIG_COPS
-  This allows you to use COPS AppleTalk cards to connect to LocalTalk
-  networks. You also need version 1.3.3 or later of the netatalk
-  package. This driver is experimental, which means that it may not
-  work. This driver will only work if you choose "AppleTalk DDP"
-  networking support, above.
-  Please read the file <file:Documentation/networking/cops.txt>.
-
-Dayna firmware support
-CONFIG_COPS_DAYNA
-  Support COPS compatible cards with Dayna style firmware (Dayna
-  DL2000/ Daynatalk/PC (half length), COPS LT-95, Farallon PhoneNET PC
-  III, Farallon PhoneNET PC II).
-
-Tangent firmware support
-CONFIG_COPS_TANGENT
-  Support COPS compatible cards with Tangent style firmware (Tangent
-  ATB_II, Novell NL-1000, Daystar Digital LT-200.
-
-Amateur Radio support
-CONFIG_HAMRADIO
-  If you want to connect your Linux box to an amateur radio, answer Y
-  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
-  the AX25-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about amateur radio.
-
-Amateur Radio AX.25 Level 2 protocol
-CONFIG_AX25
-  This is the protocol used for computer communication over amateur
-  radio. It is either used by itself for point-to-point links, or to
-  carry other protocols such as tcp/ip. To use it, you need a device
-  that connects your Linux box to your amateur radio. You can either
-  use a low speed TNC (a Terminal Node Controller acts as a kind of
-  modem connecting your computer's serial port to your radio's
-  microphone input and speaker output) supporting the KISS protocol or
-  one of the various SCC cards that are supported by the generic Z8530
-  or the DMA SCC driver. Another option are the Baycom modem serial
-  and parallel port hacks or the sound card modem (supported by their
-  own drivers). If you say Y here, you also have to say Y to one of
-  those drivers.
-
-  Information about where to get supporting software for Linux amateur
-  radio as well as information about how to configure an AX.25 port is
-  contained in the AX25-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. You might also want to
-  check out the file <file:Documentation/networking/ax25.txt> in the
-  kernel source. More information about digital amateur radio in
-  general is on the WWW at
-  <http://www.tapr.org/tapr/html/pkthome.html>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ax25.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-AX.25 DAMA Slave support
-CONFIG_AX25_DAMA_SLAVE
-  DAMA is a mechanism to prevent collisions when doing AX.25
-  networking. A DAMA server (called "master") accepts incoming traffic
-  from clients (called "slaves") and redistributes it to other slaves.
-  If you say Y here, your Linux box will act as a DAMA slave; this is
-  transparent in that you don't have to do any special DAMA
-  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
-  say N.
-
-AX.25 DAMA Master support
-CONFIG_AX25_DAMA_MASTER
-  DAMA is a mechanism to prevent collisions when doing AX.25
-  networking. A DAMA server (called "master") accepts incoming traffic
-  from clients (called "slaves") and redistributes it to other
-  slaves. If you say Y here, your Linux box will act as a DAMA server.
-  If unsure, say N.
-
-Amateur Radio NET/ROM support
-CONFIG_NETROM
-  NET/ROM is a network layer protocol on top of AX.25 useful for
-  routing.
-
-  A comprehensive listing of all the software for Linux amateur radio
-  users as well as information about how to configure an AX.25 port is
-  contained in the AX25-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. You also might want to
-  check out the file <file:Documentation/networking/ax25.txt>. More
-  information about digital amateur radio in general is on the WWW at
-  <http://www.tapr.org/tapr/html/pkthome.html>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called netrom.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Amateur Radio X.25 PLP (Rose)
-CONFIG_ROSE
-  The Packet Layer Protocol (PLP) is a way to route packets over X.25
-  connections in general and amateur radio AX.25 connections in
-  particular, essentially an alternative to NET/ROM.
-
-  A comprehensive listing of all the software for Linux amateur radio
-  users as well as information about how to configure an AX.25 port is
-  contained in the AX25-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  You also might want to
-  check out the file <file:Documentation/networking/ax25.txt>. More
-  information about digital amateur radio in general is on the WWW at
-  <http://www.tapr.org/tapr/html/pkthome.html>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called rose.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Serial port KISS driver for AX.25
-CONFIG_MKISS
-  KISS is a protocol used for the exchange of data between a computer
-  and a Terminal Node Controller (a small embedded system commonly
-  used for networking over AX.25 amateur radio connections; it
-  connects the computer's serial port with the radio's microphone
-  input and speaker output).
-
-  Although KISS is less advanced than the 6pack protocol, it has
-  the advantage that it is already supported by most modern TNCs
-  without the need for a firmware upgrade.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called mkiss.o.
-
-Serial port 6PACK driver for AX.25
-CONFIG_6PACK
-  6pack is a transmission protocol for the data exchange between your
-  PC and your TNC (the Terminal Node Controller acts as a kind of
-  modem connecting your computer's serial port to your radio's
-  microphone input and speaker output). This protocol can be used as
-  an alternative to KISS for networking over AX.25 amateur radio
-  connections, but it has some extended functionality.
-
-  Note that this driver is still experimental and might cause
-  problems. For details about the features and the usage of the
-  driver, read <file:Documentation/networking/6pack.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called 6pack.o.
-
-BPQ Ethernet driver
-CONFIG_BPQETHER
-  AX.25 is the protocol used for computer communication over amateur
-  radio. If you say Y here, you will be able to send and receive AX.25
-  traffic over Ethernet (also called "BPQ AX.25"), which could be
-  useful if some other computer on your local network has a direct
-  amateur radio connection.
-
-High-speed (DMA) SCC driver for AX.25
-CONFIG_DMASCC
-  This is a driver for high-speed SCC boards, i.e. those supporting
-  DMA on one port. You usually use those boards to connect your
-  computer to an amateur radio modem (such as the WA4DSY 56kbps
-  modem), in order to send and receive AX.25 packet radio network
-  traffic.
-
-  Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis
-  PackeTwin, and S5SCC/DMA boards. They are detected automatically.
-  If you have one of these cards, say Y here and read the AX25-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver can operate multiple boards simultaneously. If you
-  compile it as a module (by saying M instead of Y), it will be called
-  dmascc.o. If you don't pass any parameter to the driver, all
-  possible I/O addresses are probed. This could irritate other devices
-  that are currently not in use. You may specify the list of addresses
-  to be probed by "dmascc=addr1,addr2,..." (when compiled into the
-  kernel image) or "io=addr1,addr2,..." (when loaded as a module). The
-  network interfaces will be called dmascc0 and dmascc1 for the board
-  detected first, dmascc2 and dmascc3 for the second one, and so on.
-
-  Before you configure each interface with ifconfig, you MUST set
-  certain parameters, such as channel access timing, clock mode, and
-  DMA channel. This is accomplished with a small utility program,
-  dmascc_cfg, available at
-  <http://www.nt.tuwien.ac.at/~kkudielk/Linux/>. Please be sure to get
-  at least version 1.27 of dmascc_cfg, as older versions will not
-  work with the current driver.
-
-Z8530 SCC driver for AX.25
-CONFIG_SCC
-  These cards are used to connect your Linux box to an amateur radio
-  in order to communicate with other computers. If you want to use
-  this, read <file:Documentation/networking/z8530drv.txt> and the
-  AX25-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
-  to "Amateur Radio AX.25 Level 2" support.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called scc.o.
-
-Support for TRX that feedback the tx signal to rx
-CONFIG_SCC_TRXECHO
-  Some transmitters feed the transmitted signal back to the receive
-  line.  Say Y here to foil this by explicitly disabling the receiver
-  during data transmission.  If in doubt, say Y.
-
-Additional delay for PA0HZP OptoSCC compatible boards
-CONFIG_SCC_DELAY
-  Say Y here if you experience problems with the SCC driver not
-  working properly; please read
-  <file:Documentation/networking/z8530drv.txt> for details. If unsure,
-  say N.
-
-YAM driver for AX.25
-CONFIG_YAM
-  The YAM is a modem for packet radio which connects to the serial
-  port and includes some of the functions of a Terminal Node
-  Controller. If you have one of those, say Y here.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.
-
-BAYCOM picpar and par96 driver for AX.25
-CONFIG_BAYCOM_PAR
-  This is a driver for Baycom style simple amateur radio modems that
-  connect to a parallel interface. The driver supports the picpar and
-  par96 designs. To configure the driver, use the sethdlc utility
-  available in the standard ax25 utilities package. For information on
-  the modems, see <http://www.baycom.de/> and the file
-  <file:Documentation/networking/baycom.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called baycom_par.o.
-
-BAYCOM EPP driver for AX.25
-CONFIG_BAYCOM_EPP
-  This is a driver for Baycom style simple amateur radio modems that
-  connect to a parallel interface. The driver supports the EPP
-  designs. To configure the driver, use the sethdlc utility available
-  in the standard ax25 utilities package. For information on the
-  modems, see <http://www.baycom.de/> and the file
-  <file:Documentation/networking/baycom.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called baycom_par.o.
-
-BAYCOM ser12 full-duplex driver for AX.25
-CONFIG_BAYCOM_SER_FDX
-  This is one of two drivers for Baycom style simple amateur radio
-  modems that connect to a serial interface. The driver supports the
-  ser12 design in full-duplex mode. In addition, it allows the
-  baudrate to be set between 300 and 4800 baud (however not all modems
-  support all baudrates). This is the preferred driver. The next
-  driver, "BAYCOM ser12 half-duplex driver for AX.25" is the old
-  driver and still provided in case this driver does not work with
-  your serial interface chip. To configure the driver, use the sethdlc
-  utility available in the standard ax25 utilities package. For
-  information on the modems, see <http://www.baycom.de/> and
-  <file:Documentation/networking/baycom.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called baycom_ser_fdx.o.
-
-BAYCOM ser12 half-duplex driver for AX.25
-CONFIG_BAYCOM_SER_HDX
-  This is one of two drivers for Baycom style simple amateur radio
-  modems that connect to a serial interface. The driver supports the
-  ser12 design in full-duplex mode. This is the old driver.  It is
-  still provided in case your serial interface chip does not work with
-  the full-duplex driver. This driver is depreciated.  To configure
-  the driver, use the sethdlc utility available in the standard ax25
-  utilities package. For information on the modems, see
-  <http://www.baycom.de/> and
-  <file:Documentation/networking/baycom.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called baycom_ser_hdx.o.
-
-Sound card modem driver for AX.25
-CONFIG_SOUNDMODEM
-  This experimental driver allows a standard Sound Blaster or
-  WindowsSoundSystem compatible sound card to be used as a packet
-  radio modem (NOT as a telephone modem!), to send digital traffic
-  over amateur radio.
-
-  To configure the driver, use the sethdlc, smdiag and smmixer
-  utilities available in the standard ax25 utilities package. For
-  information on how to key the transmitter, see
-  <http://www.ife.ee.ethz.ch/~sailer/pcf/ptt_circ/ptt.html> and
-  <file:Documentation/networking/soundmodem.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called soundmodem.o.
-
-Sound card modem support for Sound Blaster and compatible cards
-CONFIG_SOUNDMODEM_SBC
-  This option enables the soundmodem driver to use Sound Blaster and
-  compatible cards. If you have a dual mode card (i.e. a WSS cards
-  with a Sound Blaster emulation) you should say N here and Y to
-  "Sound card modem support for WSS and Crystal cards", below, because
-  this usually results in better performance. This option also
-  supports SB16/32/64 in full-duplex mode.
-
-Sound card modem support for WSS and Crystal cards
-CONFIG_SOUNDMODEM_WSS
-  This option enables the soundmodem driver to use WindowsSoundSystem
-  compatible cards. These cards feature a codec chip from either
-  Analog Devices (such as AD1848, AD1845, AD1812) or Crystal
-  Semiconductors (such as CS4248, CS423x). This option also supports
-  the WSS full-duplex operation which currently works with Crystal
-  CS423x chips. If you don't need full-duplex operation, do not enable
-  it to save performance.
-
-Sound card modem support for 1200 baud AFSK modulation
-CONFIG_SOUNDMODEM_AFSK1200
-  This option enables the soundmodem driver 1200 baud AFSK modem,
-  compatible to popular modems using TCM3105 or AM7911. The
-  demodulator requires about 12% of the CPU power of a Pentium 75 CPU
-  per channel.
-
-Sound card modem support for 2400 baud AFSK modulation (7.3728MHz crystal)
-CONFIG_SOUNDMODEM_AFSK2400_7
-  This option enables the soundmodem driver 2400 baud AFSK modem,
-  compatible to TCM3105 modems (over-)clocked with a 7.3728MHz
-  crystal. Note that the availability of this driver does _not_ imply
-  that I recommend building such links. It is only here since users
-  especially in eastern Europe have asked me to do so. In fact this
-  modulation scheme has many disadvantages, mainly its incompatibility
-  with many transceiver designs and the fact that the TCM3105 (if
-  used) is operated widely outside its specifications.
-
-Sound card modem support for 2400 baud AFSK modulation (8MHz crystal)
-CONFIG_SOUNDMODEM_AFSK2400_8
-  This option enables the soundmodem driver 2400 baud AFSK modem,
-  compatible to TCM3105 modems (over-)clocked with an 8MHz crystal.
-  Note that the availability of this driver does _not_ imply that I
-  recommend building such links. It is only here since users
-  especially in eastern Europe have asked me to do so. In fact this
-  modulation scheme has many disadvantages, mainly its incompatibility
-  with many transceiver designs and the fact that the TCM3105 (if
-  used) is operated widely outside its specifications.
-
-Sound card modem support for 2666 baud AFSK modulation
-CONFIG_SOUNDMODEM_AFSK2666
-  This option enables the soundmodem driver 2666 baud AFSK modem.
-  This modem is experimental, and not compatible to anything
-  else I know of.
-
-Sound card modem support for 4800 baud 8PSK modulation
-CONFIG_SOUNDMODEM_PSK4800
-  This option enables the soundmodem driver 4800 baud 8PSK modem.
-  This modem is experimental, and not compatible to anything
-  else I know of.
-
-Sound card modem support for 4800 baud HAPN-1 modulation
-CONFIG_SOUNDMODEM_HAPN4800
-  This option enables the soundmodem driver 4800 baud HAPN-1
-  compatible modem. This modulation seems to be widely used 'down
-  under' and in the Netherlands. Here, nobody uses it, so I could not
-  test if it works. It is compatible to itself, however :-)
-
-Sound card modem support for 9600 baud FSK G3RUH modulation
-CONFIG_SOUNDMODEM_FSK9600
-  This option enables the soundmodem driver 9600 baud FSK modem,
-  compatible to the G3RUH standard. The demodulator requires about 4%
-  of the CPU power of a Pentium 75 CPU per channel. You can say Y to
-  both 1200 baud AFSK and 9600 baud FSK if you want (but obviously you
-  can only use one protocol at a time, depending on what the other end
-  can understand).
-
-CCITT X.25 Packet Layer
-CONFIG_X25
-  X.25 is a set of standardized network protocols, similar in scope to
-  frame relay; the one physical line from your box to the X.25 network
-  entry point can carry several logical point-to-point connections
-  (called "virtual circuits") to other computers connected to the X.25
-  network. Governments, banks, and other organizations tend to use it
-  to connect to each other or to form Wide Area Networks (WANs). Many
-  countries have public X.25 networks. X.25 consists of two
-  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
-  if you want that) and the lower level data link layer protocol LAPB
-  (say Y to "LAPB Data Link Driver" below if you want that).
-
-  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
-  <http://www.cisco.com/univercd/data/doc/software/11_0/rpcg/cx25.htm>.
-  Information about X.25 for Linux is contained in the files
-  <file:Documentation/networking/x25.txt> and
-  <file:Documentation/networking/x25-iface.txt>.
-
-  One connects to an X.25 network either with a dedicated network card
-  using the X.21 protocol (not yet supported by Linux) or one can do
-  X.25 over a standard telephone line using an ordinary modem (say Y
-  to "X.25 async driver" below) or over Ethernet using an ordinary
-  Ethernet card and either the 802.2 LLC protocol (say Y to "802.2
-  LLC" below) or LAPB over Ethernet (say Y to "LAPB Data Link Driver"
-  and "LAPB over Ethernet driver" below).
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called x25.o. If unsure, say N.
-
-LAPB Data Link Driver
-CONFIG_LAPB
-  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
-  the lower) part of the X.25 protocol. It offers a reliable
-  connection service to exchange data frames with one other host, and
-  it is used to transport higher level protocols (mostly X.25 Packet
-  Layer, the higher part of X.25, but others are possible as well).
-  Usually, LAPB is used with specialized X.21 network cards, but Linux
-  currently supports LAPB only over Ethernet connections. If you want
-  to use LAPB connections over Ethernet, say Y here and to "LAPB over
-  Ethernet driver" below. Read
-  <file:Documentation/networking/lapb-module.txt> for technical
-  details.
-
-  If you want to compile this driver as a module though ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called lapb.o.  If unsure, say N.
-
-802.2 LLC
-CONFIG_LLC
-  This is a Logical Link Layer protocol used for X.25 connections over
-  Ethernet, using ordinary Ethernet cards.
-
-Frame Diverter
-CONFIG_NET_DIVERT
-  The Frame Diverter allows you to divert packets from the
-  network, that are not aimed at the interface receiving it (in
-  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
-  with the Frames Diverter on, can do some *really* transparent www
-  caching using a Squid proxy for example.
-
-  This is very useful when you don't want to change your router's
-  config (or if you simply don't have access to it).
-
-  The other possible usages of diverting Ethernet Frames are
-  numberous:
-   - reroute smtp traffic to another interface
-   - traffic-shape certain network streams
-   - transparently proxy smtp connections
-   - etc...
-
-  For more informations, please refer to:
-    <http://diverter.sourceforge.net/>
-    <http://perso.wanadoo.fr/magpie/EtherDivert.html>
-
-  If unsure, say N.
-
-802.1d Ethernet Bridging
-CONFIG_BRIDGE
-  If you say Y here, then your Linux box will be able to act as an
-  Ethernet bridge, which means that the different Ethernet segments it
-  is connected to will appear as one Ethernet to the participants.
-  Several such bridges can work together to create even larger
-  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
-  As this is a standard, Linux bridges will cooperate properly with
-  other third party bridge products.
-
-  In order to use the Ethernet bridge, you'll need the bridge
-  configuration tools; see <file:Documentation/networking/bridge.txt>
-  for location. Please read the Bridge mini-HOWTO for more
-  information.
-
-  Note that if your box acts as a bridge, it probably contains several
-  Ethernet devices, but the kernel is not able to recognize more than
-  one at boot time without help; for details read the Ethernet-HOWTO,
-  available from in <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this code as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called bridge.o.
-
-  If unsure, say N.
-
-Packet socket
-CONFIG_PACKET
-  The Packet protocol is used by applications which communicate
-  directly with network devices without an intermediate network
-  protocol implemented in the kernel, e.g. tcpdump.  If you want them
-  to work, choose Y.
-
-  This driver is also available as a module called af_packet.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>; if you use modprobe
-  or kmod, you may also want to add "alias net-pf-17 af_packet" to
-  /etc/modules.conf.
-
-  If unsure, say Y.
-
-Packet socket: mmapped IO
-CONFIG_PACKET_MMAP
-  If you say Y here, the Packet protocol driver will use an IO
-  mechanism that results in faster communication.
-
-  If unsure, say N.
-
-Netlink device emulation
-CONFIG_NETLINK_DEV
-  This option will be removed soon. Any programs that want to use
-  character special nodes like /dev/tap0 or /dev/route (all with major
-  number 36) need this option, and need to be rewritten soon to use
-  the real netlink socket.
-  This is a backward compatibility option, choose Y for now.
-
-Asynchronous Transfer Mode (ATM)
-CONFIG_ATM
-  ATM is a high-speed networking technology for Local Area Networks
-  and Wide Area Networks.  It uses a fixed packet size and is
-  connection oriented, allowing for the negotiation of minimum
-  bandwidth requirements.
-
-  In order to participate in an ATM network, your Linux box needs an
-  ATM networking card. If you have that, say Y here and to the driver
-  of your ATM card below.
-
-  Note that you need a set of user-space programs to actually make use
-  of ATM.  See the file <file:Documentation/networking/atm.txt> for
-  further details.
-
-Classical IP over ATM
-CONFIG_ATM_CLIP
-  Classical IP over ATM for PVCs and SVCs, supporting InARP and
-  ATMARP. If you want to communication with other IP hosts on your ATM
-  network, you will typically either say Y here or to "LAN Emulation
-  (LANE)" below.
-
-Do NOT send ICMP if no neighbour
-CONFIG_ATM_CLIP_NO_ICMP
-  Normally, an "ICMP host unreachable" message is sent if a neighbour
-  cannot be reached because there is no VC to it in the kernel's
-  ATMARP table. This may cause problems when ATMARP table entries are
-  briefly removed during revalidation. If you say Y here, packets to
-  such neighbours are silently discarded instead.
-
-LAN Emulation (LANE) support
-CONFIG_ATM_LANE
-  LAN Emulation emulates services of existing LANs across an ATM
-  network. Besides operating as a normal ATM end station client, Linux
-  LANE client can also act as an proxy client bridging packets between
-  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
-
-Multi-Protocol Over ATM (MPOA) support
-CONFIG_ATM_MPOA
-  Multi-Protocol Over ATM allows ATM edge devices such as routers,
-  bridges and ATM attached hosts establish direct ATM VCs across
-  subnetwork boundaries. These shortcut connections bypass routers
-  enhancing overall network performance.
-
-ATM over TCP
-CONFIG_ATM_TCP
-  ATM over TCP driver. Useful mainly for development and for
-  experiments. If unsure, say N.
-
-Efficient Networks ENI155P
-CONFIG_ATM_ENI
-  Driver for the Efficient Networks ENI155p series and SMC ATM
-  Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
-  2MB on-board RAM (Efficient calls them "C" and "S", respectively),
-  and the FPGA and the ASIC Tonga versions of the board are supported.
-  The driver works with MMF (-MF or ...F) and UTP-5 (-U5 or ...D)
-  adapters.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called eni.o.
-
-Enable extended debugging
-CONFIG_ATM_ENI_DEBUG
-  Extended debugging records various events and displays that list
-  when an inconsistency is detected. This mechanism is faster than
-  generally using printks, but still has some impact on performance.
-  Note that extended debugging may create certain race conditions
-  itself. Enable this ONLY if you suspect problems with the driver.
-
-Fine-tune burst settings
-CONFIG_ATM_ENI_TUNE_BURST
-  In order to obtain good throughput, the ENI NIC can transfer
-  multiple words of data per PCI bus access cycle. Such a multi-word
-  transfer is called a burst.
-
-  The default settings for the burst sizes are suitable for most PCI
-  chipsets. However, in some cases, large bursts may overrun buffers
-  in the PCI chipset and cause data corruption. In such cases, large
-  bursts must be disabled and only (slower) small bursts can be used.
-  The burst sizes can be set independently in the send (TX) and
-  receive (RX) direction.
-
-  Note that enabling many different burst sizes in the same direction
-  may increase the cost of setting up a transfer such that the
-  resulting throughput is lower than when using only the largest
-  available burst size.
-
-  Also, sometimes larger bursts lead to lower throughput, e.g. on an
-  Intel 440FX board, a drop from 135 Mbps to 103 Mbps was observed
-  when going from 8W to 16W bursts.
-
-Enable 16W TX bursts (discouraged)
-CONFIG_ATM_ENI_BURST_TX_16W
-  Burst sixteen words at once in the send direction. This may work
-  with recent PCI chipsets, but is known to fail with older chipsets.
-
-Enable 8W TX bursts (recommended)
-CONFIG_ATM_ENI_BURST_TX_8W
-  Burst eight words at once in the send direction. This is the default
-  setting.
-
-Enable 4W TX bursts (optional)
-CONFIG_ATM_ENI_BURST_TX_4W
-  Burst four words at once in the send direction. You may want to try
-  this if you have disabled 8W bursts. Enabling 4W if 8W is also set
-  may or may not improve throughput.
-
-Enable 2W TX bursts (optional)
-CONFIG_ATM_ENI_BURST_TX_2W
-  Burst two words at once in the send direction. You may want to try
-  this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or 8W
-  are also set may or may not improve throughput.
-
-Enable 16W RX bursts (discouraged)
-CONFIG_ATM_ENI_BURST_RX_16W
-  Burst sixteen words at once in the receive direction. This may work
-  with recent PCI chipsets, but is known to fail with older chipsets.
-
-Enable 8W RX bursts (discouraged)
-CONFIG_ATM_ENI_BURST_RX_8W
-  Burst eight words at once in the receive direction. This may work
-  with recent PCI chipsets, but is known to fail with older chipsets,
-  such as the Intel Neptune series.
-
-Enable 4W RX bursts (recommended)
-CONFIG_ATM_ENI_BURST_RX_4W
-  Burst four words at once in the receive direction. This is the
-  default setting. Enabling 4W if 8W is also set may or may not
-  improve throughput.
-
-Enable 2W RX bursts (optional)
-CONFIG_ATM_ENI_BURST_RX_2W
-  Burst two words at once in the receive direction. You may want to
-  try this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or
-  8W are also set may or may not improve throughput.
-
-ZeitNet ZN1221/ZN1225
-CONFIG_ATM_ZATM
-  Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
-  adapters.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called zatm.o.
-
-Enable extended debugging
-CONFIG_ATM_ZATM_DEBUG
-  Extended debugging records various events and displays that list
-  when an inconsistency is detected. This mechanism is faster than
-  generally using printks, but still has some impact on performance.
-  Note that extended debugging may create certain race conditions
-  itself. Enable this ONLY if you suspect problems with the driver.
-
-Fujitsu FireStream (FS50/FS155)
-CONFIG_ATM_FIRESTREAM
-  Driver for the Fujitsu FireStream 155 (MB86697) and
-  FireStream 50 (MB86695) ATM PCI chips.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  firestream.o.
-
-Enable usec resolution timestamps
-CONFIG_ATM_ZATM_EXACT_TS
-  The uPD98401 SAR chip supports a high-resolution timer (approx. 30
-  MHz) that is used for very accurate reception timestamps. Because
-  that timer overflows after 140 seconds, and also to avoid timer
-  drift, time measurements need to be periodically synchronized with
-  the normal system time. Enabling this feature will add some general
-  overhead for timer synchronization and also per-packet overhead for
-  time conversion.
-
-IDT 77201/11 (NICStAR) (ForeRunnerLE)
-CONFIG_ATM_NICSTAR
-  The NICStAR chipset family is used in a large number of ATM NICs for
-  25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
-  series. Say Y if you have one of those.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called
-  nicstar.o.
-
-Use suni PHY driver (155Mbps)
-CONFIG_ATM_NICSTAR_USE_SUNI
-  Support for the S-UNI and compatible PHYsical layer chips. These are
-  found in most 155Mbps NICStAR based ATM cards, namely in the
-  ForeRunner LE155 cards. This driver provides detection of cable~
-  removal and reinsertion and provides some statistics. This driver
-  doesn't have removal capability when compiled as a module, so if you
-  need that capability don't include S-UNI support (it's not needed to
-  make the card work).
-
-Use IDT77015 PHY driver (25Mbps)
-CONFIG_ATM_NICSTAR_USE_IDT77105
-  Support for the PHYsical layer chip in ForeRunner LE25 cards. In
-  addition to cable removal/reinsertion detection, this driver allows
-  you to control the loopback mode of the chip via a dedicated IOCTL.
-  This driver is required for proper handling of temporary carrier
-  loss, so if you have a 25Mbps NICStAR based ATM card you must say Y.
-
-IDT 77252 (NICStAR II)
-CONFIG_ATM_IDT77252
-  Driver for the IDT 77252 ATM PCI chips.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called idt77252.o
-
-Enable debugging messages
-CONFIG_ATM_IDT77252_DEBUG
-  Somewhat useful debugging messages are available. The choice of
-  messages is controlled by a bitmap.  This may be specified as a
-  module argument.  See the file <file:drivers/atm/idt77252.h> for
-  the meanings of the bits in the mask.
-
-  When active, these messages can have a significant impact on the
-  speed of the driver, and the size of your syslog files! When
-  inactive, they will have only a modest impact on performance.
-
-Receive ALL cells in raw queue
-CONFIG_ATM_IDT77252_RCV_ALL
-  Enable receiving of all cells on the ATM link, that do not match
-  an open connection in the raw cell queue of the driver.  Useful
-  for debugging or special applications only, so the safe answer is N.
-
-Madge Ambassador (Collage PCI 155 Server)
-CONFIG_ATM_AMBASSADOR
-  This is a driver for ATMizer based ATM card produced by Madge
-  Networks Ltd. Say Y (or M to compile as a module named ambassador.o)
-  here if you have one of these cards.
-
-Enable debugging messages
-CONFIG_ATM_AMBASSADOR_DEBUG
-  Somewhat useful debugging messages are available. The choice of
-  messages is controlled by a bitmap.  This may be specified as a
-  module argument (kernel command line argument as well?), changed
-  dynamically using an ioctl (not yet) or changed by sending the
-  string "Dxxxx" to VCI 1023 (where x is a hex digit).  See the file
-  <file:drivers/atm/ambassador.h> for the meanings of the bits in the
-  mask.
-
-  When active, these messages can have a significant impact on the
-  speed of the driver, and the size of your syslog files! When
-  inactive, they will have only a modest impact on performance.
-
-Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)
-CONFIG_ATM_HORIZON
-  This is a driver for the Horizon chipset ATM adapter cards once
-  produced by Madge Networks Ltd. Say Y (or M to compile as a module
-  named horizon.o) here if you have one of these cards.
-
-Enable debugging messages
-CONFIG_ATM_HORIZON_DEBUG
-  Somewhat useful debugging messages are available. The choice of
-  messages is controlled by a bitmap.  This may be specified as a
-  module argument (kernel command line argument as well?), changed
-  dynamically using an ioctl (not yet) or changed by sending the
-  string "Dxxxx" to VCI 1023 (where x is a hex digit).  See the file
-  <file:drivers/atm/horizon.h> for the meanings of the bits in the
-  mask.
-
-  When active, these messages can have a significant impact on the
-  speed of the driver, and the size of your syslog files! When
-  inactive, they will have only a modest impact on performance.
-
-Interphase ATM PCI x575/x525/x531
-CONFIG_ATM_IA
-  This is a driver for the Interphase (i)ChipSAR adapter cards
-  which include a variety of variants in term of the size of the
-  control memory (128K-1KVC, 512K-4KVC), the size of the packet
-  memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
-  UTP155, UTP25, DS3 and E3). Go to:
-  	<http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
-  for more info about the cards. Say Y (or M to compile as a module
-  named iphase.o) here if you have one of these cards.
-
-  See the file <file:Documentation/networking/iphase.txt> for further
-  details.
-
-Enable debugging messages
-CONFIG_ATM_IA_DEBUG
-  Somewhat useful debugging messages are available. The choice of
-  messages is controlled by a bitmap. This may be specified as a
-  module argument (kernel command line argument as well?), changed
-  dynamically using an ioctl (Get the debug utility, iadbg, from
-  <ftp://ftp.iphase.com/pub/atm/pci/>).
-
-  See the file <file:drivers/atm/iphase.h> for the meanings of the
-  bits in the mask.
-
-  When active, these messages can have a significant impact on the
-  speed of the driver, and the size of your syslog files! When
-  inactive, they will have only a modest impact on performance.
-
-Linux telephony support
-CONFIG_PHONE
-  Say Y here if you have a telephony card, which for example allows
-  you to use a regular phone for voice-over-IP applications.
-
-  Note: this has nothing to do with modems.  You do not need to say Y
-  here in order to be able to use a modem under Linux.
-
-  This support is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  phonedev.o.
-
-Compaq Smart Array support
-CONFIG_BLK_CPQ_CISS_DA
-  This is the driver for Compaq Smart Array 5xxx controllers.
-  Everyone using these boards should say Y here.
-  See <file:Documentation/cciss.txt> for the current list of
-  boards supported by this driver, and for further information
-  on the use of this driver.
-
-SCSI tape drive support for Smart Array 5xxx
-CONFIG_CISS_SCSI_TAPE
-  When enabled (Y), this option allows SCSI tape drives and SCSI medium
-  changers (tape robots) to be accessed via a Compaq 5xxx array 
-  controller.  (See Documentation/cciss.txt for more details.)
-
-  "SCSI support" and "SCSI tape support" must also be enabled for this 
-  option to work.
-
-  When this option is disabled (N), the SCSI portion of the driver 
-  is not compiled.
-
-QuickNet Internet LineJack/PhoneJack support
-CONFIG_PHONE_IXJ
-  Say M if you have a telephony card manufactured by Quicknet
-  Technologies, Inc.  These include the Internet PhoneJACK and
-  Internet LineJACK Telephony Cards. You will get a module called
-  ixj.o.
-
-  For the ISA versions of these products, you can configure the
-  cards using the isapnp tools (pnpdump/isapnp) or you can use the
-  isapnp support.  Please read <file:Documentation/telephony/ixj.txt>.
-
-  For more information on these cards, see Quicknet's web site at:
-  <http://www.quicknet.net/>.
-
-  If you do not have any Quicknet telephony cards, you can safely
-  say N here.
-
-FORE Systems 200E-series
-CONFIG_ATM_FORE200E_MAYBE
-  This is a driver for the FORE Systems 200E-series ATM adapter
-  cards. It simultaneously supports PCA-200E and SBA-200E models
-  on PCI and SBUS hosts. Say Y (or M to compile as a module
-  named fore_200e.o) here if you have one of these ATM adapters.
-
-  Note that the driver will actually be compiled only if you
-  additionally enable the support for PCA-200E and/or SBA-200E
-  cards.
-
-  See the file <file:Documentation/networking/fore200e.txt> for
-  further details.
-
-Enable PCA-200E card support on PCI-based hosts
-CONFIG_ATM_FORE200E_PCA
-  Say Y here if you want your PCA-200E cards to be probed.
-
-Use default PCA-200E firmware
-CONFIG_ATM_FORE200E_PCA_DEFAULT_FW
-  Use the default PCA-200E firmware data shipped with the driver.
-
-  Normal users do not have to deal with the firmware stuff, so
-  they should say Y here.
-
-Pathname of user-supplied binary firmware
-CONFIG_ATM_FORE200E_PCA_FW
-  This defines the pathname of an alternative PCA-200E binary
-  firmware image supplied by the user. This pathname may be
-  absolute or relative to the drivers/atm directory.
-
-  The driver comes with an adequate firmware image, so normal users do
-  not have to supply an alternative one. They just say Y to "Use
-  default PCA-200E firmware" instead.
-
-Enable SBA-200E card support on SBUS-based hosts
-CONFIG_ATM_FORE200E_SBA
-  Say Y here if you want your SBA-200E cards to be probed.
-
-Use default SBA-200E firmware
-CONFIG_ATM_FORE200E_SBA_DEFAULT_FW
-  Use the default SBA-200E firmware data shipped with the driver.
-
-  Normal users do not have to deal with the firmware stuff, so
-  they should say Y here.
-
-Pathname of user-supplied binary firmware
-CONFIG_ATM_FORE200E_SBA_FW
-  This defines the pathname of an alternative SBA-200E binary
-  firmware image supplied by the user. This pathname may be
-  absolute or relative to the drivers/atm directory.
-
-  The driver comes with an adequate firmware image, so normal users do
-  not have to supply an alternative one. They just say Y to "Use
-  default SBA-200E firmware", above.
-
-Maximum number of tx retries
-CONFIG_ATM_FORE200E_TX_RETRY
-  Specifies the number of times the driver attempts to transmit
-  a message before giving up, if the transmit queue of the ATM card
-  is transiently saturated.
-
-  Saturation of the transmit queue may occur only under extreme
-  conditions, e.g. when a fast host continuously submits very small
-  frames (<64 bytes) or raw AAL0 cells (48 bytes) to the ATM adapter.
-
-  Note that under common conditions, it is unlikely that you encounter
-  a saturation of the transmit queue, so the retry mechanism never
-  comes into play.
-
-Debugging level (0-3)
-CONFIG_ATM_FORE200E_DEBUG
-  Specifies the level of debugging messages issued by the driver.
-  The verbosity of the driver increases with the value of this
-  parameter.
-
-  When active, these messages can have a significant impact on
-  the performances of the driver, and the size of your syslog files!
-  Keep the debugging level to 0 during normal operations.
-
-Fusion MPT device support
-CONFIG_FUSION
-  LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
-  provides high performance SCSI host initiator, and LAN [1] interface
-  services to a host system.  The Fusion architecture is capable of
-  duplexing these protocols on high-speed Fibre Channel
-  (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320)
-  physical medium.
-
-          [1] LAN is not supported on parallel SCSI medium.
-
-  These drivers require a Fusion MPT compatible PCI adapter installed
-  in the host system.  MPT adapters contain specialized I/O processors
-  to handle I/O workload, and more importantly to offload this work
-  from the host CPU(s).
-
-  If you have Fusion MPT hardware and want to use it, you can say
-  Y or M here to add MPT (base + ScsiHost) drivers.
-    <Y> = build lib (fusion.o), and link [static] into the kernel [2]
-          proper
-    <M> = compiled as [dynamic] modules [3] named: (mptbase.o,
-          mptscsih.o)
-
-          [2] In order enable capability to boot the linux kernel
-              natively from a Fusion MPT target device, you MUST
-               answer Y here! (currently requires CONFIG_BLK_DEV_SD)
-          [3] This support is also available as a module ( = code
-              which can be inserted in and removed from the running
-              kernel whenever you want).  If you want to compile as
-              modules, say M here and read
-              <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-  If you say Y or M here you will get a choice of these
-  additional protocol and support module options:         Module Name:
-    <M>   Enhanced SCSI error reporting                     (isense.o)
-    <M>   Fusion MPT misc device (ioctl) driver             (mptctl.o)
-    <M>   Fusion MPT LAN driver                             (mptlan.o)
-
-  ---
-  Fusion MPT is trademark of LSI Logic Corporation, and its
-  architecture is based on LSI Logic's Message Passing Interface (MPI)
-  specification.
-
-Fusion MPT enhanced SCSI error reporting [optional] module
-CONFIG_FUSION_ISENSE
-  The isense module (roughly stands for Interpret SENSE data) is
-  completely optional.  It simply provides extra English readable
-  strings in SCSI Error Report(s) that might be generated from the
-  Fusion MPT SCSI Host driver, for example when a target device
-  returns a SCSI check condition on a I/O.  Without this module
-  loaded you might see:
-
-    SCSI Error Report =-=-= (ioc0,scsi5:0)
-      SCSI_Status=02h (CHECK_CONDITION)
-      Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00
-      SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-      SenseKey=2h (NOT READY); FRU=02h
-      ASC/ASCQ=29h/00h
-
-  Where otherwise, if this module had been loaded, you would see:
-
-    SCSI Error Report =-=-= (ioc0,scsi5:0)
-      SCSI_Status=02h (CHECK_CONDITION)
-      Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
-      SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-      SenseKey=2h (NOT READY); FRU=02h
-      ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
-
-  Say M for "Enhanced SCSI error reporting" to compile this optional module,
-  creating a driver named: isense.o.
-
-  NOTE: Support for building this feature into the kernel is not
-  available, due to kernel size considerations.
-
-Fusion MPT misc device (ioctl) driver [optional] module
-CONFIG_FUSION_CTL
-  The Fusion MPT misc device driver provides specialized control
-  of MPT adapters via system ioctl calls.  Use of ioctl calls to
-  the MPT driver requires that you create and use a misc device
-  node ala:
-    mknod /dev/mptctl c 10 240
-
-  One use of this ioctl interface is to perform an upgrade (reflash)
-  of the MPT adapter firmware.  Refer to readme file(s) distributed
-  with the Fusion MPT linux driver for additional details.
-
-  If enabled by saying M to this, a driver named: mptctl.o
-  will be compiled.
-
-  If unsure whether you really want or need this, say N.
-
-Fusion MPT LAN driver [optional]
-CONFIG_FUSION_LAN
-  This module supports LAN IP traffic over Fibre Channel port(s)
-  on Fusion MPT compatible hardware (LSIFC9xx chips).
-  The physical interface used is defined in RFC 2625.
-  Please refer to that document for details.
-
-  Installing this driver requires the knowledge to configure and
-  activate a new network interface, "fc0", using standard Linux tools.
-
-  If enabled by saying M to this, a driver named: mptlan.o
-  will be compiled.
-
-  If unsure whether you really want or need this, say N.
-
-  NOTES: This feature is NOT available nor supported for linux-2.2.x
-  kernels.  You must be building a linux-2.3.x or linux-2.4.x kernel
-  in order to configure this option.
-  Support for building this feature into the linux kernel is not
-  yet available.
-
-SCSI support
-CONFIG_SCSI
-  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
-  any other SCSI device under Linux, say Y and make sure that you know
-  the name of your SCSI host adapter (the card inside your computer
-  that "speaks" the SCSI protocol, also called SCSI controller),
-  because you will be asked for it.
-
-  You also need to say Y here if you want support for the parallel
-  port version of the 100 MB IOMEGA ZIP drive.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called scsi_mod.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>.  However, do not compile this as a
-  module if your root file system (the one containing the directory /)
-  is located on a SCSI device.
-
-SCSI disk support
-CONFIG_BLK_DEV_SD
-  If you want to use a SCSI hard disk or the SCSI or parallel port
-  version of the IOMEGA ZIP drive under Linux, say Y and read the
-  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sd_mod.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>.  Do not compile this driver as a
-  module if your root file system (the one containing the directory /)
-  is located on a SCSI disk. In this case, do not compile the driver
-  for your SCSI host adapter (below) as a module either.
-
-Maximum number of SCSI disks that can be loaded as modules
-CONFIG_SD_EXTRA_DEVS
-  This controls the amount of additional space allocated in tables for
-  drivers that are loaded as modules after the kernel is booted.  In
-  the event that the SCSI core itself was loaded as a module, this
-  value is the number of additional disks that can be loaded after the
-  first host driver is loaded.
-
-  Admittedly this isn't pretty, but there are tons of race conditions
-  involved with resizing the internal arrays on the fly.  Someday this
-  flag will go away, and everything will work automatically.
-
-  If you don't understand what's going on, go with the default.
-
-Maximum number of SCSI tapes that can be loaded as modules
-CONFIG_ST_EXTRA_DEVS
-  This controls the amount of additional space allocated in tables for
-  drivers that are loaded as modules after the kernel is booted.  In
-  the event that the SCSI core itself was loaded as a module, this
-  value is the number of additional tapes that can be loaded after the
-  first host driver is loaded.
-
-  Admittedly this isn't pretty, but there are tons of race conditions
-  involved with resizing the internal arrays on the fly.  Someday this
-  flag will go away, and everything will work automatically.
-
-  If you don't understand what's going on, go with the default.
-
-SCSI tape support
-CONFIG_CHR_DEV_ST
-  If you want to use a SCSI tape drive under Linux, say Y and read the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, and
-  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
-  SCSI CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called st.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>.
-
-OnStream SC-x0 SCSI tape support
-CONFIG_CHR_DEV_OSST
-  The OnStream SC-x0 SCSI tape drives can not be driven by the
-  standard st driver, but instead need this special osst driver and
-  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
-  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
-  as well.  Note that there is also a second generation of OnStream
-  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
-  tapes (QIC-157) and can be driven by the standard driver st.
-  For more information, you may have a look at the SCSI-HOWTO
-  <http://www.linuxdoc.org/docs.html#howto>  and
-  <file:drivers/scsi/README.osst>  in the kernel source.
-  More info on the OnStream driver may be found on
-  <http://linux1.onstream.nl/test/>
-  Please also have a look at the standard st docu, as most of it
-  applies to osst as well.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called osst.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>.
-
-SCSI CD-ROM support
-CONFIG_BLK_DEV_SR
-  If you want to use a SCSI CD-ROM under Linux, say Y and read the
-  SCSI-HOWTO and the CD-ROM-HOWTO at
-  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
-  or M to "ISO 9660 CD-ROM file system support" later.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sr_mod.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>.
-
-Maximum number of CD-ROM devices that can be loaded as modules
-CONFIG_SR_EXTRA_DEVS
-  This controls the amount of additional space allocated in tables for
-  drivers that are loaded as modules after the kernel is booted. In
-  the event that the SCSI core itself was loaded as a module, this
-  value is the number of additional CD-ROMs that can be loaded after
-  the first host driver is loaded.
-
-  Admittedly this isn't pretty, but there are tons of race conditions
-  involved with resizing the internal arrays on the fly.  Someday this
-  flag will go away, and everything will work automatically.
-
-  If you don't understand what's going on, go with the default.
-
-Enable vendor-specific extensions (for SCSI CD-ROM)
-CONFIG_BLK_DEV_SR_VENDOR
-  This enables the usage of vendor specific SCSI commands. This is
-  required to support multisession CDs with old NEC/TOSHIBA cdrom
-  drives (and HP Writers). If you have such a drive and get the first
-  session only, try saying Y here; everybody else says N.
-
-SCSI generic support
-CONFIG_CHR_DEV_SG
-  If you want to use SCSI scanners, synthesizers or CD-writers or just
-  about anything having "SCSI" in its name other than hard disks,
-  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
-  directly, so you need some additional software which knows how to
-  talk to these devices using the SCSI protocol:
-
-  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
-  writer software look at Cdrtools
-  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
-  and for burning a "disk at once": CDRDAO
-  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
-  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
-  For other devices, it's possible that you'll have to write the
-  driver software yourself. Please read the file
-  <file:Documentation/scsi-generic.txt> for more information.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> and
-  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
-  say N.
-
-Probe all LUNs on each SCSI device
-CONFIG_SCSI_MULTI_LUN
-  If you have a SCSI device that supports more than one LUN (Logical
-  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
-  can say Y here to force the SCSI driver to probe for multiple LUNs.
-  A SCSI device with multiple LUNs acts logically like multiple SCSI
-  devices. The vast majority of SCSI devices have only one LUN, and
-  so most people can say N here and should in fact do so, because it
-  is safer.
-
-Verbose SCSI error reporting (kernel size +=12K)
-CONFIG_SCSI_CONSTANTS
-  The error messages regarding your SCSI hardware will be easier to
-  understand if you say Y here; it will enlarge your kernel by about
-  12 KB. If in doubt, say Y.
-
-SCSI logging facility
-CONFIG_SCSI_LOGGING
-  This turns on a logging facility that can be used to debug a number
-  of SCSI related problems.
-
-  If you say Y here, no logging output will appear by default, but you
-  can enable logging by saying Y to "/proc file system support" and
-  "Sysctl support" below and executing the command
-
-     echo "scsi log token [level]" > /proc/scsi/scsi
-
-  at boot time after the /proc file system has been mounted.
-
-  There are a number of things that can be used for 'token' (you can
-  find them in the source: <file:drivers/scsi/scsi.c>), and this
-  allows you to select the types of information you want, and the
-  level allows you to select the level of verbosity.
-
-  If you say N here, it may be harder to track down some types of SCSI
-  problems. If you say Y here your kernel will be somewhat larger, but
-  there should be no noticeable performance impact as long as you have
-  logging turned off.
-
-SGI WD93C93 SCSI Driver
-CONFIG_SCSI_SGIWD93
-  Say Y here to support the on-board WD93C93 SCSI controller found (a)
-  on the Indigo2 and other MIPS-based SGI machines, and (b) on ARCS
-  ARM-based machines.
-
-DEC NCR53C94 SCSI Driver
-CONFIG_SCSI_DECNCR
-  Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
-  based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
-
-AdvanSys SCSI support
-CONFIG_SCSI_ADVANSYS
-  This is a driver for all SCSI host adapters manufactured by
-  AdvanSys. It is documented in the kernel source in
-  <file:drivers/scsi/advansys.c>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  advansys.o.
-
-Adaptec AHA152X/2825 support
-CONFIG_SCSI_AHA152X
-  This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
-  SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
-  must be manually specified in this case.
-
-  It is explained in section 3.3 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. You might also want to
-  read the file <file:drivers/scsi/README.aha152x>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aha152x.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Adaptec AHA1542 support
-CONFIG_SCSI_AHA1542
-  This is support for a SCSI host adapter.  It is explained in section
-  3.4 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Note that Trantor was
-  purchased by Adaptec, and some former Trantor products are being
-  sold under the Adaptec name.  If it doesn't work out of the box, you
-  may have to change some settings in <file:drivers/scsi/aha1542.h>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called aha1542.o.
-
-Adaptec AHA1740 support
-CONFIG_SCSI_AHA1740
-  This is support for a SCSI host adapter.  It is explained in section
-  3.5 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/aha1740.h>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aha1740.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Adaptec AIC7xxx support
-CONFIG_SCSI_AIC7XXX
-  This driver supports all of Adaptec's PCI based SCSI controllers
-  (not the hardware RAID controllers though) as well as the aic7770
-  based EISA and VLB SCSI controllers (the 274x and 284x series).
-  This is an Adaptec sponsored driver written by Justin Gibbs.  It is
-  intended to replace the previous aic7xxx driver maintained by Doug
-  Ledford since Doug is no longer maintaining that driver.
-
-Adaptec I2O RAID controllers
-CONFIG_SCSI_DPT_I2O
-  This driver supports all of Adaptec's I2O based RAID controllers as 
-  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
-  driver by Deanna Bonds.  See <file:drivers/scsi/README.dpti>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  dpt_i2o.o.
-
-Default number of TCQ commands per device
-CONFIG_AIC7XXX_CMDS_PER_DEVICE
-  Specify the number of commands you would like to allocate per SCSI
-  device when Tagged Command Queueing (TCQ) is enabled on that device.
-
-  This is an upper bound value for the number of tagged transactions
-  to be used for any device.  The aic7xxx driver will automatically
-  vary this number based on device behavior.  For devices with a
-  fixed maximum, the driver will eventually lock to this maximum
-  and display a console message inidicating this value.
-
-  Note: Unless you experience some type of device failure, the default
-	value, no enforced limit, should work for you.
-
-  Default: 253
-
-Delay in seconds after SCSI bus reset
-CONFIG_AIC7XXX_RESET_DELAY_MS
-  The number of milliseconds to delay after an initial bus reset.
-  The bus settle delay following all error recovery actions is
-  dictated by the SCSI layer and is not affected by this value.
-
-  Default: 15000 (15 seconds)
-
-Build Adapter Firmware with Kernel Build
-CONFIG_AIC7XXX_BUILD_FIRMWARE
-  This option should only be enabled if you are modifying the firmware
-  source to the aic7xxx driver and wish to have the generated firmware
-  include files updated during a normal kernel build.  The assembler
-  for the firmware requires lex and yacc or their equivalents, as well
-  as the db v1 library.  You may have to install additional packages
-  or modify the assembler make file or the files it includes if your
-  build environment is different than that of the author.
-
-Old Adaptec AIC7xxx support
-CONFIG_SCSI_AIC7XXX_OLD
-  WARNING This driver is an older aic7xxx driver and is no longer
-  under active development.  Adaptec, Inc. is writing a new driver to
-  take the place of this one, and it is recommended that whenever
-  possible, people should use the new Adaptec written driver instead
-  of this one.  This driver will eventually be phased out entirely.
-
-  This is support for the various aic7xxx based Adaptec SCSI
-  controllers. These include the 274x EISA cards; 284x VLB cards;
-  2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
-  motherboard based SCSI controllers from Adaptec. It does not support
-  the AAA-13x RAID controllers from Adaptec, nor will it likely ever
-  support them. It does not support the 2920 cards from Adaptec that
-  use the Future Domain SCSI controller chip. For those cards, you
-  need the "Future Domain 16xx SCSI support" driver.
-
-  In general, if the controller is based on an Adaptec SCSI controller
-  chip from the aic777x series or the aic78xx series, this driver
-  should work. The only exception is the 7810 which is specifically
-  not supported (that's the RAID controller chip on the AAA-13x
-  cards).
-
-  Note that the AHA2920 SCSI host adapter is *not* supported by this
-  driver; choose "Future Domain 16xx SCSI support" instead if you have
-  one of those.
-
-  Information on the configuration options for this controller can be
-  found by checking the help file for each of the available
-  configuration options. You should read
-  <file:drivers/scsi/aic7xxx_old/README.aic7xxx> at a minimum before
-  contacting the maintainer with any questions.  The SCSI-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>, can also
-  be of great help.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called aic7xxx_old.o.
-
-Enable tagged command queueing (TCQ) by default
-CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT
-  This option causes the aic7xxx driver to attempt to use Tagged
-  Command Queueing (TCQ) on all devices that claim to support it.
-
-  TCQ is a feature of SCSI-2 which improves performance: the host
-  adapter can send several SCSI commands to a device's queue even if
-  previous commands haven't finished yet.  Because the device is
-  intelligent, it can optimize its operations (like head positioning)
-  based on its own request queue.  Not all devices implement this
-  correctly.
-
-  If you say Y here, you can still turn off TCQ on troublesome devices
-  with the use of the tag_info boot parameter.  See the file
-  <file:drivers/scsi/README.aic7xxx> for more information on that and
-  other aic7xxx setup commands.  If this option is turned off, you may
-  still enable TCQ on known good devices by use of the tag_info boot
-  parameter.
-
-  If you are unsure about your devices then it is safest to say N
-  here.
-
-  However, TCQ can increase performance on some hard drives by as much
-  as 50% or more, so it is recommended that if you say N here, you
-  should at least read the <file:drivers/scsi/README.aic7xxx> file so
-  you will know how to enable this option manually should your drives
-  prove to be safe in regards to TCQ.
-
-  Conversely, certain drives are known to lock up or cause bus resets
-  when TCQ is enabled on them.  If you have a Western Digital
-  Enterprise SCSI drive for instance, then don't even bother to enable
-  TCQ on it as the drive will become unreliable, and it will actually
-  reduce performance.
-
-Default number of TCQ commands per device
-CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE
-  Specify the number of commands you would like to allocate per SCSI
-  device when Tagged Command Queueing (TCQ) is enabled on that device.
-
-  Reasonable figures are in the range of 8 to 24 commands per device,
-  but depending on hardware could be increased or decreased from that
-  figure. If the number is too high for any particular device, the
-  driver will automatically compensate usually after only 10 minutes
-  of uptime. It will not hinder performance if some of your devices
-  eventually have their command depth reduced, but is a waste of
-  memory if all of your devices end up reducing this number down to a
-  more reasonable figure.
-
-  NOTE: Certain very broken drives are known to lock up when given
-  more commands than they like to deal with. Quantum Fireball drives
-  are the most common in this category. For the Quantum Fireball
-  drives it is suggested to use no more than 8 commands per device.
-
-  Default: 8
-
-Collect statistics to report in /proc
-CONFIG_AIC7XXX_OLD_PROC_STATS
-  This option tells the driver to keep track of how many commands have
-  been sent to each particular device and report that information to
-  the user via the /proc/scsi/aic7xxx/n file, where n is the number of
-  the aic7xxx controller you want the information on. This adds a
-  small amount of overhead to each and every SCSI command the aic7xxx
-  driver handles, so if you aren't really interested in this
-  information, it is best to leave it disabled. This will only work if
-  you also say Y to "/proc file system support", below.
-
-  If unsure, say N.
-
-IBM ServeRAID support
-CONFIG_SCSI_IPS
-  This is support for the IBM ServeRAID hardware RAID controllers.
-  See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
-  for more information.  If this driver does not work correctly
-  without modification please contact the author by email at
-  ipslinux@us.ibm.com.
-
-  You can build this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  but only a single instance may be loaded. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  The module will be called ips.o.
-
-BusLogic SCSI support
-CONFIG_SCSI_BUSLOGIC
-  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
-  Adapters. Consult the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, and the files
-  <file:drivers/scsi/README.BusLogic> and
-  <file:drivers/scsi/README.FlashPoint> for more information. If this
-  driver does not work correctly without modification, please contact
-  the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
-
-  You can also build this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  but only a single instance may be loaded. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  The module will be called BusLogic.o.
-
-Omit BusLogic SCSI FlashPoint support
-CONFIG_SCSI_OMIT_FLASHPOINT
-  This option allows you to omit the FlashPoint support from the
-  BusLogic SCSI driver. The FlashPoint SCCB Manager code is
-  substantial, so users of MultiMaster Host Adapters may wish to omit
-  it.
-
-Compaq Fibre Channel 64-bit/66Mhz HBA support
-CONFIG_SCSI_CPQFCTS
-  Say Y here to compile in support for the Compaq StorageWorks Fibre
-  Channel 64-bit/66Mhz Host Bus Adapter.
-
-DMX3191D SCSI support
-CONFIG_SCSI_DMX3191D
-  This is support for Domex DMX3191D SCSI Host Adapters.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dmx3191d.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-DTC3180/3280 SCSI support
-CONFIG_SCSI_DTC3280
-  This is support for DTC 3180/3280 SCSI Host Adapters.  Please read
-  the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, and the file
-  <file:drivers/scsi/README.dtc3x80>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dtc.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support
-CONFIG_SCSI_EATA_DMA
-  This is support for the EATA-DMA protocol compliant SCSI Host
-  Adapters like the SmartCache III/IV, SmartRAID controller families
-  and the DPT PM2011B and PM2012B controllers.
-
-  Note that this driver is obsolete; if you have one of the above
-  SCSI Host Adapters, you should normally say N here and Y to "EATA
-  ISA/EISA/PCI support", below.  Please read the SCSI-HOWTO, available
-  from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called eata_dma.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-EATA-PIO (old DPT PM2001, PM2012A) support
-CONFIG_SCSI_EATA_PIO
-  This driver supports all EATA-PIO protocol compliant SCSI Host
-  Adapters like the DPT PM2001 and the PM2012A.  EATA-DMA compliant
-  host adapters could also use this driver but are discouraged from
-  doing so, since this driver only supports hard disks and lacks
-  numerous features.  You might want to have a look at the SCSI-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called eata_pio.o.
-
-UltraStor 14F/34F support
-CONFIG_SCSI_U14_34F
-  This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
-  The source at <file:drivers/scsi/u14-34f.c> contains some
-  information about this hardware.  If the driver doesn't work out of
-  the box, you may have to change some settings in
-  <file: drivers/scsi/u14-34f.c>.  Read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Note that there is also
-  another driver for the same hardware: "UltraStor SCSI support",
-  below.  You should say Y to both only if you want 24F support as
-  well.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called u14-34f.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-enable elevator sorting
-CONFIG_SCSI_U14_34F_LINKED_COMMANDS
-  This option enables elevator sorting for all probed SCSI disks and
-  CD-ROMs. It definitely reduces the average seek distance when doing
-  random seeks, but this does not necessarily result in a noticeable
-  performance improvement: your mileage may vary...
-
-  The safe answer is N.
-
-maximum number of queued commands
-CONFIG_SCSI_U14_34F_MAX_TAGS
-  This specifies how many SCSI commands can be maximally queued for
-  each probed SCSI device. You should reduce the default value of 8
-  only if you have disks with buggy or limited tagged command support.
-  Minimum is 2 and maximum is 14. This value is also the window size
-  used by the elevator sorting option above. The effective value used
-  by the driver for each probed SCSI device is reported at boot time.
-
-Future Domain 16xx SCSI/AHA-2920A support
-CONFIG_SCSI_FUTURE_DOMAIN
-  This is support for Future Domain's 16-bit SCSI host adapters
-  (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
-  other adapters based on the Future Domain chipsets (Quantum
-  ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
-  It is explained in section 3.7 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
-  and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
-  controller support"). This Future Domain driver works with the older
-  Adaptec AHA-2920A boards with a Future Domain chip on them.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called fdomain.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Future Domain MCS-600/700 SCSI support
-CONFIG_SCSI_FD_MCS
-  This is support for Future Domain MCS 600/700 MCA SCSI adapters.
-  Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
-  is identical to the MCS 700 and hence also supported by this driver.
-  This driver also supports the Reply SB16/SCSI card (the SCSI part).
-  It supports multiple adapters in the same system.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called fd_mcs.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Generic NCR5380/53c400 SCSI support
-CONFIG_SCSI_GENERIC_NCR5380
-  This is the generic NCR family of SCSI controllers, not to be
-  confused with the NCR 53c7 or 8xx controllers.  It is explained in
-  section 3.8 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/g_NCR5380.h>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called g_NCR5380.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Enable NCR53c400 extensions
-CONFIG_SCSI_GENERIC_NCR53C400
-  This enables certain optimizations for the NCR53c400 SCSI cards.
-  You might as well try it out.  Note that this driver will only probe
-  for the Trantor T130B in its default configuration; you might have
-  to pass a command line option to the kernel at boot time if it does
-  not detect your card.  See the file
-  <file:drivers/scsi/README.g_NCR5380> for details.
-
-# Choice: ncr5380
-NCR5380/53c400 mapping method (use Port for T130B)
-CONFIG_SCSI_G_NCR5380_PORT
-  The NCR5380 and NCR53c400 SCSI controllers come in two varieties:
-  port or memory mapped. You should know what you have. The most
-  common card, Trantor T130B, uses port mapped mode.
-
-NCR Dual 700 MCA SCSI support
-CONFIG_SCSI_NCR_D700
-  This is a driver for the MicroChannel Dual 700 card produced by
-  NCR and commonly used in 345x/35xx/4100 class machines.  It always
-  tries to negotiate sync and uses tag command queueing.
-
-  Unless you have an NCR manufactured machine, the chances are that
-  you do not have this SCSI card, so say N.
-
-HP LASI SCSI support for 53c700
-CONFIG_SCSI_LASI700
-  This is a driver for the lasi baseboard in some parisc machines
-  which is based on the 53c700 chip.  Will also support LASI subsystems
-  based on the 710 chip using 700 emulation mode.
-
-  Unless you know you have a 53c700 or 53c710 based lasi, say N here
-
-NCR53c7,8xx SCSI support
-CONFIG_SCSI_NCR53C7xx
-  This is a driver for the 53c7 and 8xx NCR family of SCSI
-  controllers, not to be confused with the NCR 5380 controllers.  It
-  is explained in section 3.8 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/53c7,8xx.h>.  Please read
-  <file:drivers/scsi/README.ncr53c7xx> for the available boot time
-  command line options.
-
-  Note: there is another driver for the 53c8xx family of controllers
-  ("NCR53C8XX SCSI support" below).  If you want to use them both, you
-  need to say M to both and build them as modules, but only one may be
-  active at a time. If you have a 53c8xx board, it's better to use the
-  other driver.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 53c7,8xx.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Always negotiate synchronous transfers
-CONFIG_SCSI_NCR53C7xx_sync
-  In general, this is good; however, it is a bit dangerous since there
-  are some broken SCSI devices out there. Take your chances. Safe bet
-  is N.
-
-Allow FAST-SCSI [10MHz]
-CONFIG_SCSI_NCR53C7xx_FAST
-  This will enable 10MHz FAST-SCSI transfers with your host
-  adapter. Some systems have problems with that speed, so it's safest
-  to say N here.
-
-Allow DISCONNECT
-CONFIG_SCSI_NCR53C7xx_DISCONNECT
-  This enables the disconnect/reconnect feature of the NCR SCSI
-  controller. When you say Y here, a slow SCSI device will not lock
-  the SCSI bus while processing a request, allowing simultaneous use
-  of e.g. a SCSI hard disk and SCSI tape or CD-ROM drive, and
-  providing much better performance when using slow and fast SCSI
-  devices at the same time. Some devices, however, do not operate
-  properly with this option enabled, and will cause your SCSI system
-  to hang, which might cause a system crash. The safe answer
-  therefore is to say N.
-
-SYM53C8XX Version 2 SCSI support
-CONFIG_SCSI_SYM53C8XX_2
-  This driver supports the whole NCR53C8XX/SYM53C8XX family of 
-  PCI-SCSI controllers. It also supports the subset of LSI53C10XX 
-  Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 
-  language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 
-  controllers.
-
-  If your system has problems using this new major version of the
-  SYM53C8XX driver, you may switch back to driver version 1.
-
-  Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
-  information.
-
-PCI DMA addressing mode
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
-  This option only applies to PCI-SCSI chip that are PCI DAC capable 
-  (875A, 895A, 896, 1010-33, 1010-66, 1000).
-
-  When set to 0, only PCI 32 bit DMA addressing (SAC) will be performed.
-  When set to 1, 40 bit DMA addressing (with upper 24 bits of address 
-  set to zero) is supported. The addressable range is here 1 TB.
-  When set to 2, full 64 bits of address for DMA are supported, but only
-  16 segments of 4 GB can be addressed. The addressable range is so 
-  limited to 64 GB.
-
-  The safest value is 0 (32 bit DMA addressing) that is guessed to still 
-  fit most of real machines.
-
-  The preferred value 1 (40 bit DMA addressing) should make happy 
-  properly engineered PCI DAC capable host bridges. You may configure
-  this option for Intel platforms with more than 4 GB of memory.
-
-  The still experimental value 2 (64 bit DMA addressing with 16 x 4GB 
-  segments limitation) can be used on systems that require PCI address 
-  bits past bit 39 to be set for the addressing of memory using PCI 
-  DAC cycles.
-
-use normal IO
-CONFIG_SCSI_SYM53C8XX_IOMAPPED
-  If you say Y here, the driver will preferently use normal IO rather than 
-  memory mapped IO.
-
-maximum number of queued commands
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS
-  This option allows you to specify the maximum number of commands
-  that can be queued to any device, when tagged command queuing is
-  possible. The driver supports up to 256 queued commands per device.
-  This value is used as a compiled-in hard limit.
-
-default tagged command queue depth
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
-  This is the default value of the command queue depth the driver will 
-  announce to the generic SCSI layer for devices that support tagged 
-  command queueing. This value can be changed from the boot command line.
-  This is a soft limit that cannot exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
-
-NCR53C8XX SCSI support
-CONFIG_SCSI_NCR53C8XX
-  This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
-  of PCI-SCSI controllers.  This driver supports parity checking,
-  tagged command queuing and fast synchronous data transfers up to 80
-  MB/s with wide FAST-40 LVD devices and controllers.
-
-  Recent versions of the 53C8XX chips are better supported by the
-  option "SYM53C8XX SCSI support", below.
-
-  Note: there is yet another driver for the 53c8xx family of
-  controllers ("NCR53c7,8xx SCSI support" above).  If you want to use
-  them both, you need to say M to both and build them as modules, but
-  only one may be active at a time.  If you have a 53c8xx board, you
-  probably do not want to use the "NCR53c7,8xx SCSI support".
-
-  Please read <file:drivers/scsi/README.ncr53c8xx> for more
-  information.
-
-SYM53C8XX Version 1 SCSI support
-CONFIG_SCSI_SYM53C8XX
-  This driver supports all the features of recent 53C8XX chips (used
-  in PCI SCSI controllers), notably the hardware phase mismatch
-  feature of the SYM53C896.
-
-  Older versions of the 53C8XX chips are not supported by this
-  driver.  If your system uses either a 810 rev. < 16, a 815, or a 825
-  rev. < 16 PCI SCSI processor, you must use the generic NCR53C8XX
-  driver ("NCR53C8XX SCSI support" above) or configure both the
-  NCR53C8XX and this SYM53C8XX drivers either as module or linked to
-  the kernel image.
-
-  When both drivers are linked into the kernel, the SYM53C8XX driver
-  is called first at initialization and you can use the 'excl=ioaddr'
-  driver boot option to exclude attachment of adapters by the
-  SYM53C8XX driver.  For example, entering
-  'sym53c8xx=excl:0xb400,excl=0xc000' at the lilo prompt prevents
-  adapters at io address 0xb400 and 0xc000 from being attached by the
-  SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
-  The 'excl' option is also supported by the NCR53C8XX driver.
-
-  Please read <file:drivers/scsi/README.ncr53c8xx> for more
-  information.
-
-Synchronous transfer frequency in MHz
-CONFIG_SCSI_NCR53C8XX_SYNC
-  The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
-  rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80.  The numbers
-  are respectively the maximum data transfer rates in mega-transfers
-  per second for each class.  For example, a FAST-20 Wide 16 device is
-  able to transfer data at 20 million 16 bit packets per second for a
-  total rate of 40 MB/s.
-
-  You may specify 0 if you want to only use asynchronous data
-  transfers. This is the safest and slowest option. Otherwise, specify
-  a value between 5 and 80, depending on the capability of your SCSI
-  controller.  The higher the number, the faster the data transfer.
-  Note that 80 should normally be ok since the driver decreases the
-  value automatically according to the controller's capabilities.
-
-  Your answer to this question is ignored for controllers with NVRAM,
-  since the driver will get this information from the user set-up.  It
-  also can be overridden using a boot setup option, as follows
-  (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
-  for FAST-20 synchronous data transfer (20 mega-transfers per
-  second).
-
-  The normal answer therefore is not to go with the default but to
-  select the maximum value 80 allowing the driver to use the maximum
-  value supported by each controller. If this causes problems with
-  your SCSI devices, you should come back and decrease the value.
-
-  There is no safe option other than using good cabling, right
-  terminations and SCSI conformant devices.
-
-Use normal IO
-CONFIG_SCSI_NCR53C8XX_IOMAPPED
-  If you say Y here, the driver will use normal IO, as opposed to
-  memory mapped IO. Memory mapped IO has less latency than normal IO
-  and works for most Intel-based hardware. Under Linux/Alpha only
-  normal IO is currently supported by the driver and so, this option
-  has no effect on those systems.
-
-  The normal answer therefore is N; try Y only if you encounter SCSI
-  related problems.
-
-Not allow targets to disconnect
-CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
-  This option is only provided for safety if you suspect some SCSI
-  device of yours to not support properly the target-disconnect
-  feature. In that case, you would say Y here. In general however, to
-  not allow targets to disconnect is not reasonable if there is more
-  than 1 device on a SCSI bus. The normal answer therefore is N.
-
-Default tagged command queue depth
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-  "Tagged command queuing" is a feature of SCSI-2 which improves
-  performance: the host adapter can send several SCSI commands to a
-  device's queue even if previous commands haven't finished yet.
-  Because the device is intelligent, it can optimize its operations
-  (like head positioning) based on its own request queue. Some SCSI
-  devices don't implement this properly; if you want to disable this
-  feature, enter 0 or 1 here (it doesn't matter which).
-
-  The default value is 8 and should be supported by most hard disks.
-  This value can be overridden from the boot command line using the
-  'tags' option as follows (example):
-  'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
-  4, set queue depth to 16 for target 2 and target 3 on controller 0
-  and set queue depth to 10 for target 0 / lun 2 on controller 1.
-
-  The normal answer therefore is to go with the default 8 and to use
-  a boot command line option for devices that need to use a different
-  command queue depth.
-
-  There is no safe option other than using good SCSI devices.
-
-Maximum number of queued commands
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-  This option allows you to specify the maximum number of commands
-  that can be queued to any device, when tagged command queuing is
-  possible. The default value is 32. Minimum is 2, maximum is 64.
-  Modern hard disks are able to support 64 tags and even more, but
-  do not seem to be faster when more than 32 tags are being used.
-
-  So, the normal answer here is to go with the default value 32 unless
-  you are using very large hard disks with large cache (>= 1 MB) that
-  are able to take advantage of more than 32 tagged commands.
-
-  There is no safe option and the default answer is recommended.
-
-Assume boards are SYMBIOS compatible
-CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
-  This option allows you to enable some features depending on GPIO
-  wiring. These General Purpose Input/Output pins can be used for
-  vendor specific features or implementation of the standard SYMBIOS
-  features. Genuine SYMBIOS controllers use GPIO0 in output for
-  controller LED and GPIO3 bit as a flag indicating
-  singled-ended/differential interface. The Tekram DC-390U/F boards
-  uses a different GPIO wiring.
-
-  Your answer to this question is ignored if all your controllers have
-  NVRAM, since the driver is able to detect the board type from the
-  NVRAM format.
-
-  If all the controllers in your system are genuine SYMBIOS boards or
-  use BIOS and drivers from SYMBIOS, you would want to say Y here,
-  otherwise N. N is the safe answer.
-
-Enable traffic profiling
-CONFIG_SCSI_NCR53C8XX_PROFILE
-  This option allows you to enable profiling information gathering.
-  These statistics are not very accurate due to the low frequency
-  of the kernel clock (100 Hz on i386) and have performance impact
-  on systems that use very fast devices.
-
-  The normal answer therefore is N.
-
-Include support for the NCR PQS/PDS SCSI card
-CONFIG_SCSI_NCR53C8XX_PQS_PDS
-  Say Y here if you have a special SCSI adapter produced by NCR
-  corporation called a PCI Quad SCSI or PCI Dual SCSI. You do not need
-  this if you do not have one of these adapters. However, since this
-  device is detected as a specific PCI device, this option is quite
-  safe.
-
-  The common answer here is N, but answering Y is safe.
-
-IBMMCA SCSI support
-CONFIG_SCSI_IBMMCA
-  This is support for the IBM SCSI adapter found in many of the PS/2
-  series computers.  These machines have an MCA bus, so you need to
-  answer Y to "MCA support" as well and read
-  <file:Documentation/mca.txt>.
-
-  If the adapter isn't found during boot (a common problem for models
-  56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
-  option, where <pun> is the id of the SCSI subsystem (usually 7, but
-  if that doesn't work check your reference diskette).  Owners of
-  model 95 with a LED-matrix-display can in addition activate some
-  activity info like under OS/2, but more informative, by setting
-  'ibmmcascsi=display' as an additional kernel parameter.  Try "man
-  bootparam" or see the documentation of your boot loader about how to
-  pass options to the kernel.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ibmmca.o.
-
-Standard SCSI-order
-CONFIG_IBMMCA_SCSI_ORDER_STANDARD
-  In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
-  are assigned to the drive letters, starting with the lowest SCSI-id
-  (physical number -- pun) to be drive C:, as seen from DOS and
-  similar operating systems. When looking into papers describing the
-  ANSI-SCSI-standard, this assignment of drives appears to be wrong.
-  The SCSI-standard follows a hardware-hierarchy which says that id 7
-  has the highest priority and id 0 the lowest. Therefore, the host
-  adapters are still today everywhere placed as SCSI-id 7 by default.
-  In the SCSI-standard, the drive letters express the priority of the
-  disk. C: should be the hard disk, or a partition on it, with the
-  highest priority. This must therefore be the disk with the highest
-  SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
-  original definition of the SCSI-standard as also industrial- and
-  process-control-machines, like VME-CPUs running under realtime-OSes
-  (e.g. LynxOS, OS9) do.
-
-  If you like to run Linux on your MCA-machine with the same
-  assignment of hard disks as seen from e.g. DOS or OS/2 on your
-  machine, which is in addition conformant to the SCSI-standard, you
-  must say Y here. This is also necessary for MCA-Linux users who want
-  to keep downward compatibility to older releases of the
-  IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
-  June 1997).
-
-  If you like to have the lowest SCSI-id assigned as drive C:, as
-  modern SCSI-BIOSes do, which does not conform to the standard, but
-  is widespread and common in the PC-world of today, you must say N
-  here. If unsure, say Y.
-
-Reset SCSI-devices at boot time
-CONFIG_IBMMCA_SCSI_DEV_RESET
-  By default, SCSI-devices are reset when the machine is powered on.
-  However, some devices exist, like special-control-devices,
-  SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
-  not reset when switched on. If you say Y here, each device connected
-  to your SCSI-bus will be issued a reset-command after it has been
-  probed, while the kernel is booting. This may cause problems with
-  more modern devices, like hard disks, which do not appreciate these
-  reset commands, and can cause your system to hang. So say Y only if
-  you know that one of your older devices needs it; N is the safe
-  answer.
-
-NCR MCA 53C9x SCSI support
-CONFIG_SCSI_MCA_53C9X
-  Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
-  controller based on the NCR 53C94.  This driver will allow use of
-  the controller on the 3550, and very possibly others.
-
-  If you want to compile this as a module (= code which can be
-  inserted and removed from the running kernel whenever you want), say
-  M here and read <file:Documentation/modules.txt>.  The module will
-  be called mca_53c9x.o.
-
-Always IN2000 SCSI support
-CONFIG_SCSI_IN2000
-  This is support for an ISA bus SCSI host adapter.  You'll find more
-  information in <file:drivers/scsi/README.in2000>. If it doesn't work
-  out of the box, you may have to change the jumpers for IRQ or
-  address selection.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called in2000.o.
-
-Initio 91XXU(W) SCSI support
-CONFIG_SCSI_INITIO
-  This is support for the Initio 91XXU(W) SCSI host adapter.  Please
-  read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called initio.o.
-
-PAS16 SCSI support
-CONFIG_SCSI_PAS16
-  This is support for a SCSI host adapter.  It is explained in section
-  3.10 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/pas16.h>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pas16.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Initio INI-A100U2W SCSI support
-CONFIG_SCSI_INIA100
-  This is support for the Initio INI-A100U2W SCSI host adapter.
-  Please read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called a100u2w.o.
-
-PCI2000 support
-CONFIG_SCSI_PCI2000
-  This is support for the PCI2000I EIDE interface card which acts as a
-  SCSI host adapter.  Please read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module called pci2000.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-PCI2220i support
-CONFIG_SCSI_PCI2220I
-  This is support for the PCI2220i EIDE interface card which acts as a
-  SCSI host adapter.  Please read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module called pci2220i.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-PSI240i support
-CONFIG_SCSI_PSI240I
-  This is support for the PSI240i EIDE interface card which acts as a
-  SCSI host adapter.  Please read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module called psi240i.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Qlogic FAS SCSI support
-CONFIG_SCSI_QLOGIC_FAS
-  This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
-  FastSCSI! cards as well as any other card based on the FASXX chip
-  (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
-
-  This driver does NOT support the PCI versions of these cards. The
-  PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
-  SCSI support"), below.
-
-  Information about this driver is contained in
-  <file:drivers/scsi/README.qlogicfas>.  You should also read the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called qlogicfas.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Qlogic ISP SCSI support
-CONFIG_SCSI_QLOGIC_ISP
-  This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
-  IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
-  card is supported by the "AM53/79C974 PCI SCSI" driver.)
-
-  If you say Y here, make sure to choose "BIOS" at the question "PCI
-  access mode".
-
-  Please read the file <file:drivers/scsi/README.qlogicisp>.  You
-  should also read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called qlogicisp.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Qlogic ISP FC SCSI support
-CONFIG_SCSI_QLOGIC_FC
-  This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called qlogicfc.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Qlogic QLA 1280 SCSI support
-CONFIG_SCSI_QLOGIC_1280
-  Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called qla1280.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Seagate ST-02 and Future Domain TMC-8xx SCSI support
-CONFIG_SCSI_SEAGATE
-  These are 8-bit SCSI controllers; the ST-01 is also supported by
-  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.  If it
-  doesn't work out of the box, you may have to change some settings in
-  <file:drivers/scsi/seagate.h>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called seagate.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Trantor T128/T128F/T228 SCSI support
-CONFIG_SCSI_T128
-  This is support for a SCSI host adapter. It is explained in section
-  3.11 of the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/t128.h>.  Note that Trantor was purchased by
-  Adaptec, and some former Trantor products are being sold under the
-  Adaptec name.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called t128.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-UltraStor SCSI support
-CONFIG_SCSI_ULTRASTOR
-  This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
-  adapter family.  This driver is explained in section 3.12 of the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
-  of the box, you may have to change some settings in
-  <file:drivers/scsi/ultrastor.h>.
-
-  Note that there is also another driver for the same hardware:
-  "UltraStor 14F/34F support", above.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ultrastor.o.
-
-7000FASST SCSI support
-CONFIG_SCSI_7000FASST
-  This driver supports the Western Digital 7000 SCSI host adapter
-  family.  Some information is in the source:
-  <file:drivers/scsi/wd7000.c>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wd7000.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-ACARD SCSI support
-CONFIG_SCSI_ACARD
-  This driver supports the ACARD 870U/W SCSI host adapter.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called atp870u.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support
-CONFIG_SCSI_EATA
-  This driver supports all EATA/DMA-compliant SCSI host adapters.  DPT
-  ISA and all EISA I/O addresses are probed looking for the "EATA"
-  signature.  If you chose "BIOS" at the question "PCI access mode",
-  the addresses of all the PCI SCSI controllers reported by the PCI
-  subsystem are probed as well.
-
-  You want to read the start of <file:drivers/scsi/eata.c> and the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that there is also another driver for the same hardware
-  available: "EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti,
-  Alphatronix) support". You should say Y to only one of them.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called eata.o.
-
-enable tagged command queueing
-CONFIG_SCSI_EATA_TAGGED_QUEUE
-  This is a feature of SCSI-2 which improves performance: the host
-  adapter can send several SCSI commands to a device's queue even if
-  previous commands haven't finished yet. Most EATA adapters negotiate
-  this feature automatically with the device, even if your answer is
-  N. The safe answer is N.
-
-enable elevator sorting
-CONFIG_SCSI_EATA_LINKED_COMMANDS
-  This option enables elevator sorting for all probed SCSI disks and
-  CD-ROMs. It definitely reduces the average seek distance when doing
-  random seeks, but this does not necessarily result in a noticeable
-  performance improvement: your mileage may vary...
-  The safe answer is N.
-
-maximum number of queued commands
-CONFIG_SCSI_EATA_MAX_TAGS
-  This specifies how many SCSI commands can be maximally queued for
-  each probed SCSI device. You should reduce the default value of 16
-  only if you have disks with buggy or limited tagged command support.
-  Minimum is 2 and maximum is 62. This value is also the window size
-  used by the elevator sorting option above. The effective value used
-  by the driver for each probed SCSI device is reported at boot time.
-
-NCR53c406a SCSI support
-CONFIG_SCSI_NCR53C406A
-  This is support for the NCR53c406a SCSI host adapter.  For user
-  configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
-  in the kernel source.  Also read the SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called NCR53c406.o.
-
-Symbios 53c416 SCSI support
-CONFIG_SCSI_SYM53C416
-  This is support for the sym53c416 SCSI host adapter, the SCSI
-  adapter that comes with some HP scanners. This driver requires that
-  the sym53c416 is configured first using some sort of PnP
-  configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
-  are using isapnp then you need to compile this driver as a module
-  and then load it using insmod after isapnp has run. The parameters
-  of the configured card(s) should be passed to the driver. The format
-  is:
-
-    insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
-
-  There is support for up to four adapters. If you want to compile
-  this driver as a module ( = code which can be inserted in and
-  removed from the running kernel whenever you want), say M here and
-  read <file:Documentation/modules.txt>. The module will be called
-  sym53c416.o.
-
-Simple 53c710 SCSI support (Compaq, NCR machines)
-CONFIG_SCSI_SIM710
-  This is a simple driver for NCR53c710 based SCSI host adapters.
-
-  More complex drivers for this chip are available ("NCR53c7,8xx SCSI
-  support", above), but they require that the scsi chip be able to do
-  DMA block moves between memory and on-chip registers, which can
-  cause problems under certain conditions.  This driver is designed to
-  avoid these problems and is intended to work with any Intel machines
-  using 53c710 chips, including various Compaq and NCR machines.
-
-  Please read the comments at the top of the file
-  <file:drivers/scsi/sim710.c> for more information.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called sim710.o.
-
-Tekram DC390(T) and Am53/79C974 SCSI support
-CONFIG_SCSI_DC390T
-  This driver supports PCI SCSI host adapters based on the Am53C974A
-  chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
-  PCscsi/PCnet (Am53/79C974) solutions.
-
-  Documentation can be found in <file:drivers/scsi/README.tmscsim>.
-
-  Note that this driver does NOT support Tekram DC390W/U/F, which are
-  based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
-  Also note that there is another generic Am53C974 driver,
-  "AM53/79C974 PCI SCSI support" below.  You can pick either one.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called tmscsim.o.
-
-Omit support for other Am53/79C974 based SCSI adapters
-CONFIG_SCSI_DC390T_NOGENSUPP
-  If you say N here, the DC390(T) SCSI driver relies on the DC390
-  EEPROM to get initial values for its settings, such as speed,
-  termination, etc.  If it can't find this EEPROM, it will use
-  defaults or the user supplied boot/module parameters.  For details
-  on driver configuration see <file:drivers/scsi/README.tmscsim>.
-
-  If you say Y here and if no EEPROM is found, the driver gives up and
-  thus only supports Tekram DC390(T) adapters.  This can be useful if
-  you have a DC390(T) and another Am53C974 based adapter, which, for
-  some reason, you want to drive with the other AM53C974 driver.
-
-  If unsure, say N.
-
-AM53/79C974 PCI SCSI support
-CONFIG_SCSI_AM53C974
-  This is support for the AM53/79C974 SCSI host adapters.  Please read
-  <file:drivers/scsi/README.AM53C974> for details.  Also, the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, is for you.
-
-  Note that there is another driver for AM53C974 based adapters:
-  "Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support", above.  You
-  can pick either one.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called AM53C974.o.
-
-AMI MegaRAID support
-CONFIG_SCSI_MEGARAID
-  This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
-  and 467 SCSI host adapters.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called megaraid.o.
-
-Intel/ICP (former GDT SCSI Disk Array) RAID Controller Support
-CONFIG_SCSI_GDTH
-  Formerly called GDT SCSI Disk Array Controller Support.
- 
-  This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 
-  manufactured by Intel/ICP vortex (an Intel Company). It is documented
-  in the kernel source in <file:drivers/scsi/gdth.c> and
-  <file:drivers/scsi/gdth.h.>
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-IOMEGA parallel port (ppa - older drives)
-CONFIG_SCSI_PPA
-  This driver supports older versions of IOMEGA's parallel port ZIP
-  drive (a 100 MB removable media device).
-
-  Note that you can say N here if you have the SCSI version of the ZIP
-  drive: it will be supported automatically if you said Y to the
-  generic "SCSI disk support", above.
-
-  If you have the ZIP Plus drive or a more recent parallel port ZIP
-  drive (if the supplied cable with the drive is labeled "AutoDetect")
-  then you should say N here and Y to "IOMEGA parallel port (imm -
-  newer drives)", below.
-
-  For more information about this driver and how to use it you should
-  read the file <file:drivers/scsi/README.ppa>.  You should also read
-  the SCSI-HOWTO, which is available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If you use this driver,
-  you will still be able to use the parallel port for other tasks,
-  such as a printer; it is safe to compile both drivers into the
-  kernel.
-
-  This driver is also available as a module which can be inserted in
-  and removed from the running kernel whenever you want.  To compile
-  this driver as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called ppa.o.
-
-IOMEGA parallel port (imm - newer drives)
-CONFIG_SCSI_IMM
-  This driver supports newer versions of IOMEGA's parallel port ZIP
-  drive (a 100 MB removable media device).
-
-  Note that you can say N here if you have the SCSI version of the ZIP
-  drive: it will be supported automatically if you said Y to the
-  generic "SCSI disk support", above.
-
-  If you have the ZIP Plus drive or a more recent parallel port ZIP
-  drive (if the supplied cable with the drive is labeled "AutoDetect")
-  then you should say Y here; if you have an older ZIP drive, say N
-  here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
-
-  For more information about this driver and how to use it you should
-  read the file <file:drivers/scsi/README.ppa>.  You should also read
-  the SCSI-HOWTO, which is available from
-  <http://www.linuxdoc.org/docs.html#howto>.  If you use this driver,
-  you will still be able to use the parallel port for other tasks,
-  such as a printer; it is safe to compile both drivers into the
-  kernel.
-
-  This driver is also available as a module which can be inserted in
-  and removed from the running kernel whenever you want.  To compile
-  this driver as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called imm.o.
-
-Force the Iomega ZIP drivers to use EPP-16
-CONFIG_SCSI_IZIP_EPP16
-  EPP (Enhanced Parallel Port) is a standard for parallel ports which
-  allows them to act as expansion buses that can handle up to 64
-  peripheral devices.
-
-  Some parallel port chipsets are slower than their motherboard, and
-  so we have to control the state of the chipset's FIFO queue every
-  now and then to avoid data loss. This will be done if you say Y
-  here.
-
-  Generally, saying Y is the safe option and slows things down a bit.
-
-Assume slow parallel port control register
-CONFIG_SCSI_IZIP_SLOW_CTR
-  Some parallel ports are known to have excessive delays between
-  changing the parallel port control register and good data being
-  available on the parallel port data/status register. This option
-  forces a small delay (1.0 usec to be exact) after changing the
-  control register to let things settle out. Enabling this option may
-  result in a big drop in performance but some very old parallel ports
-  (found in 386 vintage machines) will not work properly.
-
-  Generally, saying N is fine.
-
-SCSI debugging host simulator
-CONFIG_SCSI_DEBUG
-  This is a host adapter simulator that can be programmed to simulate
-  a large number of conditions that could occur on a real bus. The
-  advantage is that many hard to reproduce problems can be tested in a
-  controlled environment where there is reduced risk of losing
-  important data. This is primarily of use to people trying to debug
-  the middle and upper layers of the SCSI subsystem. If unsure, say N.
-
-Fibre Channel and FC4 SCSI support
-CONFIG_FC4
-  Fibre Channel is a high speed serial protocol mainly used to
-  connect large storage devices to the computer; it is compatible with
-  and intended to replace SCSI.
-
-  This is an experimental support for storage arrays connected to your
-  computer using optical fibre cables and the "X3.269-199X Fibre
-  Channel Protocol for SCSI" specification. If you want to use this,
-  you need to say Y here and to "SCSI support" as well as to the
-  drivers for the storage array itself and for the interface adapter
-  such as SOC or SOC+. This subsystem could even serve for IP
-  networking, with some code extensions.
-
-  If unsure, say N.
-
-Sun SOC/Sbus
-CONFIG_FC4_SOC
-  Serial Optical Channel is an interface card with one or two Fibre
-  Optic ports, each of which can be connected to a disk array. Note
-  that if you have older firmware in the card, you'll need the
-  microcode from the Solaris driver to make it work.
-
-  This support is also available as a module called soc.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun SOC+ (aka SOCAL)
-CONFIG_FC4_SOCAL
-  Serial Optical Channel Plus is an interface card with up to two
-  Fibre Optic ports. This card supports FC Arbitrated Loop (usually
-  A5000 or internal FC disks in E[3-6]000 machines through the
-  Interface Board). You'll probably need the microcode from the
-  Solaris driver to make it work.
-
-  This support is also available as a module called socal.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-SparcSTORAGE Array 100 and 200 series
-CONFIG_SCSI_PLUTO
-  If you never bought a disk array made by Sun, go with N.
-
-  This support is also available as a module called pluto.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun Enterprise Network Array (A5000 and EX500)
-CONFIG_SCSI_FCAL
-  This driver drives FC-AL disks connected through a Fibre Channel
-  card using the drivers/fc4 layer (currently only SOCAL). The most
-  common is either A5000 array or internal disks in E[3-6]000
-  machines.
-
-  This support is also available as a module called fcal.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>. If unsure, say N.
-
-Acorn SCSI card (aka30) support
-CONFIG_SCSI_ACORNSCSI_3
-  This enables support for the Acorn SCSI card (aka30). If you have an
-  Acorn system with one of these, say Y. If unsure, say N.
-
-Support SCSI 2 Tagged queueing
-CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
-  Say Y here to enable tagged queuing support on the Acorn SCSI card.
-
-  This is a feature of SCSI-2 which improves performance: the host
-  adapter can send several SCSI commands to a device's queue even if
-  previous commands haven't finished yet. Some SCSI devices don't
-  implement this properly, so the safe answer is N.
-
-Support SCSI 2 Synchronous Transfers
-CONFIG_SCSI_ACORNSCSI_SYNC
-  Say Y here to enable synchronous transfer negotiation with all
-  targets on the Acorn SCSI card.
-
-  In general, this improves performance; however some SCSI devices
-  don't implement it properly, so the safe answer is N.
-
-ARXE SCSI support
-CONFIG_SCSI_ARXESCSI
-  Around 1991, Arxe Systems Limited released a high density floppy
-  disc interface for the Acorn Archimedes range, to allow the use of
-  HD discs from the then new A5000 on earlier models. This interface
-  was either sold on its own or with an integral SCSI controller.
-  Technical details on this NCR53c94-based device are available at
-  <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
-  Say Y here to compile in support for the SCSI controller.
-
-Oak SCSI support
-CONFIG_SCSI_OAK1
-  This enables support for the Oak SCSI card. If you have an Acorn
-  system with one of these, say Y. If unsure, say N.
-
-Cumana SCSI I support
-CONFIG_SCSI_CUMANA_1
-  This enables support for the Cumana SCSI I card. If you have an
-  Acorn system with one of these, say Y. If unsure, say N.
-
-Cumana SCSI II support
-CONFIG_SCSI_CUMANA_2
-  This enables support for the Cumana SCSI II card. If you have an
-  Acorn system with one of these, say Y. If unsure, say N.
-
-EcoSCSI support
-CONFIG_SCSI_ECOSCSI
-  This enables support for the EcoSCSI card -- a small card that sits
-  in the Econet socket. If you have an Acorn system with one of these,
-  say Y. If unsure, say N.
-
-EESOX SCSI support
-CONFIG_SCSI_EESOXSCSI
-  This enables support for the EESOX SCSI card. If you have an Acorn
-  system with one of these, say Y, otherwise say N.
-
-PowerTec SCSI support
-CONFIG_SCSI_POWERTECSCSI
-  This enables support for the Powertec SCSI card on Acorn systems. If
-  you have one of these, say Y. If unsure, say N.
-
-IEEE 1394 (FireWire) support
-CONFIG_IEEE1394
-  IEEE 1394 describes a high performance serial bus, which is also
-  known as FireWire(tm) or i.Link(tm) and is used for connecting all
-  sorts of devices (most notably digital video cameras) to your
-  computer.
-
-  If you have FireWire hardware and want to use it, say Y here.  This
-  is the core support only, you will also need to select a driver for
-  your IEEE 1394 adapter.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ieee1394.o.
-
-Texas Instruments PCILynx support
-CONFIG_IEEE1394_PCILYNX
-  Say Y here if you have an IEEE-1394 controller with the Texas
-  Instruments PCILynx chip.  Note: this driver is written for revision
-  2 of this chip and may not work with revision 0.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called pcilynx.o.
-
-Use local RAM on PCILynx board
-CONFIG_IEEE1394_PCILYNX_LOCALRAM
-  This option makes the PCILynx driver use local RAM available on some
-  PCILynx setups for Packet Control Lists. Local RAM is random access
-  memory which resides on the PCILynx board as opposed to on your
-  computer's motherboard. Local RAM may speed up command processing
-  because no PCI transfers are necessary during use of the Packet
-  Control Lists.
-
-  Note that there are no known PCILynx systems providing local RAM
-  except for the evaluation boards by Texas Instruments and that the
-  PCILynx does not reliably report missing RAM. This means that it is
-  dangerous to say Y here if you are not absolutely sure that your
-  board provides 64KB of local RAM.
-
-  If unsure, say N.
-
-Support for non-IEEE1394 local ports
-CONFIG_IEEE1394_PCILYNX_PORTS
-  This option enables driver code to access the RAM, ROM and AUX ports
-  of the PCILynx through character devices in /dev.  If you don't know
-  what this is about then you won't need it.
-
-  If unsure, say N.
-
-#Adaptec AIC-5800 IEEE 1394 support
-#CONFIG_IEEE1394_AIC5800
-#  Say Y here if you have a IEEE 1394 controller using the Adaptec
-#  AIC-5800 chip.  All Adaptec host adapters (89xx series) use this
-#  chip, as well as miro's DV boards.
-#
-#  If you want to compile this as a module ( = code which can be
-#  inserted in and removed from the running kernel whenever you want),
-#  say M here and read <file:Documentation/modules.txt>.  The module
-#  will be called aic5800.o.
-#
-OHCI-1394 support
-CONFIG_IEEE1394_OHCI1394
-  Enable this driver if you have an IEEE 1394 controller based on the
-  OHCI-1394 specification. The current driver is only tested with OHCI
-  chipsets made by Texas Instruments and NEC. Most third-party vendors
-  use one of these chipsets.  It should work with any OHCI-1394
-  compliant card, however.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ohci1394.o.
-
-OHCI-1394 Video support
-CONFIG_IEEE1394_VIDEO1394
-  This option enables video device usage for OHCI-1394 cards.  Enable
-  this option only if you have an IEEE 1394 video device connected to
-  an OHCI-1394 card.
-
-OHCI-DV I/O support
-CONFIG_IEEE1394_DV1394
-  This driver allows you to transmit and receive DV (digital video)
-  streams on an OHCI-1394 card using a simple frame-oriented
-  interface.
-
-  The user-space API for dv1394 is documented in dv1394.h.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called dv1394.o.
-
-SBP-2 support (Harddisks etc.)
-CONFIG_IEEE1394_SBP2
-  This option enables you to use SBP-2 devices connected to your IEEE
-  1394 bus.  SBP-2 devices include harddrives and DVD devices.
-
-Raw IEEE 1394 I/O support
-CONFIG_IEEE1394_RAWIO
-  Say Y here if you want support for the raw device. This is generally
-  a good idea, so you should say Y here. The raw device enables
-  direct communication of user programs with the IEEE 1394 bus and
-  thus with the attached peripherals.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called raw1394.o.
-
-Excessive debugging output
-CONFIG_IEEE1394_VERBOSEDEBUG
-  If you say Y here, you will get very verbose debugging logs from the
-  subsystem which includes a dump of the header of every sent and
-  received packet.  This can amount to a high amount of data collected
-  in a very short time which is usually also saved to disk by the
-  system logging daemons.
-
-  Say Y if you really want or need the debugging output, everyone else
-  says N.
-
-Network device support
-CONFIG_NETDEVICES
-  You can say N here if you don't intend to connect your Linux box to
-  any other computer at all or if all your connections will be over a
-  telephone line with a modem either via UUCP (UUCP is a protocol to
-  forward mail and news between unix hosts over telephone lines; read
-  the UUCP-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
-  account or a BBS, even using term (term is a program which gives you
-  almost full Internet connectivity if you have a regular dial up
-  shell account on some Internet connected Unix computer. Read
-  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
-  You'll have to say Y if your computer contains a network card that
-  you want to use under Linux (make sure you know its name because you
-  will be asked for it and read the Ethernet-HOWTO (especially if you
-  plan to use more than one network card under Linux)) or if you want
-  to use SLIP (Serial Line Internet Protocol is the protocol used to
-  send Internet traffic over telephone lines or null modem cables) or
-  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
-  and newer replacement for SLIP) or PLIP (Parallel Line Internet
-  Protocol is mainly used to create a mini network by connecting the
-  parallel ports of two local machines) or AX.25/KISS (protocol for
-  sending Internet traffic over amateur radio links).
-
-  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
-  Olaf Kirch's excellent and free book "Network Administrator's
-  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
-  unsure, say Y.
-
-Dummy net driver support
-CONFIG_DUMMY
-  This is essentially a bit-bucket device (i.e. traffic you send to
-  this device is consigned into oblivion) with a configurable IP
-  address. It is most commonly used in order to make your currently
-  inactive SLIP address seem like a real address for local programs.
-  If you use SLIP or PPP, you might want to say Y here. Since this
-  thing often comes in handy, the default is Y. It won't enlarge your
-  kernel either. What a deal. Read about it in the Network
-  Administrator's Guide, available from
-  <http://www.linuxdoc.org/docs.html#guide>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called dummy.o.  If you want to use more than one dummy
-  device at a time, you need to compile this driver as a module.
-  Instead of 'dummy', the devices will then be called 'dummy0',
-  'dummy1' etc.
-
-Bonding driver support
-CONFIG_BONDING
-  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
-  Channels together. This is called 'Etherchannel' by Cisco,
-  'Trunking' by Sun, and 'Bonding' in Linux.
-
-  If you have two Ethernet connections to some other computer, you can
-  make them behave like one double speed connection using this driver.
-  Naturally, this has to be supported at the other end as well, either
-  with a similar Bonding Linux driver, a Cisco 5500 switch or a
-  SunTrunking SunSoft driver.
-
-  This is similar to the EQL driver, but it merges Ethernet segments
-  instead of serial lines.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called bonding.o.
-
-SLIP (serial line) support
-CONFIG_SLIP
-  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
-  connect to your Internet service provider or to connect to some
-  other local Unix box or if you want to configure your Linux box as a
-  Slip/CSlip server for other people to dial in. SLIP (Serial Line
-  Internet Protocol) is a protocol used to send Internet traffic over
-  serial connections such as telephone lines or null modem cables;
-  nowadays, the protocol PPP is more commonly used for this same
-  purpose.
-
-  Normally, your access provider has to support SLIP in order for you
-  to be able to use it, but there is now a SLIP emulator called SLiRP
-  around (available from
-  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-  allows you to use SLIP over a regular dial up shell connection. If
-  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
-  NET-3-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, explains how to
-  configure SLIP. Note that you don't need this option if you just
-  want to run term (term is a program which gives you almost full
-  Internet connectivity if you have a regular dial up shell account on
-  some Internet connected Unix computer. Read
-  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
-  support will enlarge your kernel by about 4 KB. If unsure, say N.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>. The module will be
-  called slip.o.
-
-CSLIP compressed headers
-CONFIG_SLIP_COMPRESSED
-  This protocol is faster than SLIP because it uses compression on the
-  TCP/IP headers (not on the data itself), but it has to be supported
-  on both ends. Ask your access provider if you are not sure and
-  answer Y, just in case. You will still be able to use plain SLIP. If
-  you plan to use SLiRP, the SLIP emulator (available from
-  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
-  allows you to use SLIP over a regular dial up shell connection, you
-  definitely want to say Y here. The NET-3-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, explains how to configure
-  CSLIP. This won't enlarge your kernel.
-
-Keepalive and linefill
-CONFIG_SLIP_SMART
-  Adds additional capabilities to the SLIP driver to support the
-  RELCOM line fill and keepalive monitoring. Ideal on poor quality
-  analogue lines.
-
-Six bit SLIP encapsulation
-CONFIG_SLIP_MODE_SLIP6
-  Just occasionally you may need to run IP over hostile serial
-  networks that don't pass all control characters or are only seven
-  bit. Saying Y here adds an extra mode you can use with SLIP:
-  "slip6". In this mode, SLIP will only send normal ASCII symbols over
-  the serial device. Naturally, this has to be supported at the other
-  end of the link as well. It's good enough, for example, to run IP
-  over the async ports of a Camtec JNT Pad. If unsure, say N.
-
-PPP (point-to-point protocol) support
-CONFIG_PPP
-  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
-  the same purpose: sending Internet traffic over telephone (and other
-  serial) lines.  Ask your access provider if they support it, because
-  otherwise you can't use it; most Internet access providers these
-  days support PPP rather than SLIP.
-
-  To use PPP, you need an additional program called pppd as described
-  in the PPP-HOWTO, available at
-  <http://www.linuxdoc.org/docs.html#howto>.  Make sure that you have
-  the version of pppd recommended in <file:Documentation/Changes>.
-  The PPP option enlarges your kernel by about 16 KB.
-
-  There are actually two versions of PPP: the traditional PPP for
-  asynchronous lines, such as regular analog phone lines, and
-  synchronous PPP which can be used over digital ISDN lines for
-  example.  If you want to use PPP over phone lines or other
-  asynchronous serial lines, you need to say Y (or M) here and also to
-  the next option, "PPP support for async serial ports".  For PPP over
-  synchronous lines, you should say Y (or M) here and to "Support
-  synchronous PPP", below.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you said Y to "Version information on all symbols" above, then
-  you cannot compile the PPP driver into the kernel; you can then only
-  compile it as a module.  The module will be called ppp_generic.o.
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.
-
-PPP multilink support
-CONFIG_PPP_MULTILINK
-  PPP multilink is a protocol (defined in RFC 1990) which allows you
-  to combine several (logical or physical) lines into one logical PPP
-  connection, so that you can utilize your full bandwidth.
-
-  This has to be supported at the other end as well and you need a
-  version of the pppd daemon which understands the multilink protocol.
-
-  If unsure, say N.
-
-PPP filtering
-CONFIG_PPP_FILTER
-  Say Y here if you want to be able to filter the packets passing over
-  PPP interfaces.  This allows you to control which packets count as
-  activity (i.e. which packets will reset the idle timer or bring up
-  a demand-dialled link) and which packets are to be dropped entirely.
-  You need to say Y here if you wish to use the pass-filter and
-  active-filter options to pppd.
-
-  If unsure, say N.
-
-PPP support for async serial ports
-CONFIG_PPP_ASYNC
-  Say Y (or M) here if you want to be able to use PPP over standard
-  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
-  a modem (not a synchronous or ISDN modem) to contact your ISP, you
-  need this option.
-
-  This code is also available as a module (code which can be inserted
-  into and removed from the running kernel).  If you want to compile
-  it as a module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say Y.
-
-PPP support for sync tty ports
-CONFIG_PPP_SYNC_TTY
-  Say Y (or M) here if you want to be able to use PPP over synchronous
-  (HDLC) tty devices, such as the SyncLink adapter. These devices
-  are often used for high-speed leased lines like T1/E1.
-
-  This code is also available as a module (code which can be inserted
-  into and removed from the running kernel).  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-PPP Deflate compression
-CONFIG_PPP_DEFLATE
-  Support for the Deflate compression method for PPP, which uses the
-  Deflate algorithm (the same algorithm that gzip uses) to compress
-  each PPP packet before it is sent over the wire.  The machine at the
-  other end of the PPP link (usually your ISP) has to support the
-  Deflate compression method as well for this to be useful.  Even if
-  they don't support it, it is safe to say Y here.
-
-  This code is also available as a module (code which can be inserted
-  into and removed from the running kernel).  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-PPP BSD-Compress compression
-CONFIG_PPP_BSDCOMP
-  Support for the BSD-Compress compression method for PPP, which uses
-  the LZW compression method to compress each PPP packet before it is
-  sent over the wire. The machine at the other end of the PPP link
-  (usually your ISP) has to support the BSD-Compress compression
-  method as well for this to be useful. Even if they don't support it,
-  it is safe to say Y here.
-
-  The PPP Deflate compression method ("PPP Deflate compression",
-  above) is preferable to BSD-Compress, because it compresses better
-  and is patent-free.
-
-  Note that the BSD compression code will always be compiled as a
-  module; it is called bsd_comp.o and will show up in the directory
-  modules once you have said "make modules". If unsure, say N.
-
-PPP over Ethernet
-CONFIG_PPPOE
-  Support for PPP over Ethernet.
-
-  This driver requires a specially patched pppd daemon.  The patch to
-  pppd, along with binaries of a patched pppd package can be found at:
-  <http://www.shoshin.uwaterloo.ca/~mostrows/>.
-
-Wireless LAN (non-hamradio)
-CONFIG_NET_RADIO
-  Support for wireless LANs and everything having to do with radio,
-  but not with amateur radio or FM broadcasting.
-
-  Saying Y here also enables the Wireless Extensions (creates
-  /proc/net/wireless and enables ifconfig access). The Wireless
-  Extension is a generic API allowing a driver to expose to the user
-  space configuration and statistics specific to common Wireless LANs.
-  The beauty of it is that a single set of tool can support all the
-  variations of Wireless LANs, regardless of their type (as long as
-  the driver supports Wireless Extension). Another advantage is that
-  these parameters may be changed on the fly without restarting the
-  driver (or Linux). If you wish to use Wireless Extensions with
-  wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
-  the tools from
-  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-  Some user-level drivers for scarab devices which don't require
-  special kernel support are available from
-  <ftp://shadow.cabi.net/pub/Linux/>.
-
-STRIP (Metricom Starmode radio IP)
-CONFIG_STRIP
-  Say Y if you have a Metricom radio and intend to use Starmode Radio
-  IP. STRIP is a radio protocol developed for the MosquitoNet project
-  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
-  traffic using Metricom radios.  Metricom radios are small, battery
-  powered, 100kbit/sec packet radio transceivers, about the size and
-  weight of a cellular telephone. (You may also have heard them called
-  "Metricom modems" but we avoid the term "modem" because it misleads
-  many people into thinking that you can plug a Metricom modem into a
-  phone line and use it as a modem.)
-
-  You can use STRIP on any Linux machine with a serial port, although
-  it is obviously most useful for people with laptop computers. If you
-  think you might get a Metricom radio in the future, there is no harm
-  in saying Y to STRIP now, except that it makes the kernel a bit
-  bigger.
-
-  You can also compile this as a module ( = code which can be inserted
-  in and removed from the running kernel whenever you want), say M
-  here and read <file:Documentation/modules.txt>.  The module will be
-  called strip.o.
-
-AT&T WaveLAN & DEC RoamAbout DS support
-CONFIG_WAVELAN
-  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
-  a Radio LAN (wireless Ethernet-like Local Area Network) using the
-  radio frequencies 900 MHz and 2.4 GHz.
-
-  This driver support the ISA version of the WaveLAN card.  A separate
-  driver for the PCMCIA (PC-card) hardware is available in David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).
-
-  If you want to use an ISA WaveLAN card under Linux, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. Some more specific
-  information is contained in
-  <file:Documentation/networking/wavelan.txt> and in the source code
-  <file:drivers/net/wavelan.p.h>.
-
-  You will also need the wireless tools package available from
-  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-  Please read the man pages contained therein.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wavelan.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Aironet Arlan 655 & IC2200 DS support
-CONFIG_ARLAN
-  Aironet makes Arlan, a class of wireless LAN adapters. These use the
-  www.Telxon.com chip, which is also used on several similar cards.
-  This driver is tested on the 655 and IC2200 series cards. Look at
-  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
-
-  The driver is built as two modules, arlan and arlan-proc. The latter
-  is the /proc interface and is not needed most of time.
-
-  On some computers the card ends up in non-valid state after some
-  time. Use a ping-reset script to clear it.
-
-Aironet 4500/4800 series adapters
-CONFIG_AIRONET4500
-  www.aironet.com (recently bought by Cisco) makes these 802.11 DS
-  adapters.  Driver by Elmer Joandi (elmer@ylenurme.ee).
-
-  Say Y here if you have such an adapter, and then say Y below to
-  the option that applies to your particular type of card (PCI, ISA,
-  or PCMCIA).
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aironet4500_core.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.
-
-  quick config parameters:
-	SSID=tsunami - "The Password"
-	adhoc=1  	there are no Access Points around
-	master=1 	Adhoc master (the one who creates network
-                        sync)
-	slave=1		Adhoc slave (btw, it is still forming own net
-			sometimes, and has problems with firmware...
-			change IbssJoinNetTimeout from /proc...)
-	channel=1..? 	meaningful in adhoc mode
-
-  If you have problems with screwing up card, both_bap_lock=1 is a
-  conservative value (performance hit 15%).
-
-  All other parameters can be set via the proc interface.
-
-Aironet 4500/4800 ISA/PCI/PNP/365 support
-CONFIG_AIRONET4500_NONCS
-  If you have an ISA, PCI or PCMCIA Aironet 4500/4800 wireless LAN
-  card, say Y here, and then also to the options below that apply
-  to you.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aironet4500_card.o.  If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Aironet 4500/4800 PNP support
-CONFIG_AIRONET4500_PNP
-  If you have an ISA Aironet 4500/4800 card which you want to use in
-  PnP (Plug and Play) mode, say Y here. This is the recommended mode
-  for ISA cards. Remember however to enable the PnP jumper on the
-  board if you say Y here.
-
-Aironet 4500/4800 PCI support
-CONFIG_AIRONET4500_PCI
-  If you have an PCI Aironet 4500/4800 card, say Y here.
-
-Aironet 4500/4800 ISA broken support
-CONFIG_AIRONET4500_ISA
-  If you have an ISA Aironet 4500/4800 card which you want to run in
-  non-PnP mode, say Y here. This is not recommended and does not work
-  correctly at this point. Say N.
-
-Aironet 4500/4800 I365 broken support
-CONFIG_AIRONET4500_I365
-  If you have a PCMCIA Aironet 4500/4800 card which you want to use
-  without the standard PCMCIA cardservices provided by the pcmcia-cs
-  package, say Y here. This is not recommended, so say N.
-
-Aironet 4500/4800 PCMCIA support
-CONFIG_AIRONET4500_CS
-  Say Y here if you have a PCMCIA Aironet 4500/4800 card which you
-  want to use with the standard PCMCIA cardservices provided by the
-  pcmcia-cs package.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aironet4500_cs.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Aironet 4500/4800 PROC interface
-CONFIG_AIRONET4500_PROC
-  If you say Y here (and to the "/proc file system" below), you will
-  be able to configure your Aironet card via the
-  /proc/sys/aironet4500 interface.
-
-  Additional info: look in <file:drivers/net/aironet4500_rid.c>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aironet4500_proc.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  NOTE: the proc interface uses a lot of memory, so it is recommended
-        to compile it as a module and remove the module after
-        configuration.
-
-LAPB over Ethernet driver
-CONFIG_LAPBETHER
-  This is a driver for a pseudo device (typically called /dev/lapb0)
-  which allows you to open an LAPB point-to-point connection to some
-  other computer on your Ethernet network.  In order to do this, you
-  need to say Y or M to the driver for your Ethernet card as well as
-  to "LAPB Data Link Driver".
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called lapbether.o.  If unsure, say N.
-
-X.25 async driver
-CONFIG_X25_ASY
-  This is a driver for sending and receiving X.25 frames over regular
-  asynchronous serial lines such as telephone lines equipped with
-  ordinary modems.  Experts should note that this driver doesn't
-  currently comply with the asynchronous HDLS framing protocols in
-  CCITT recommendation X.25.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called x25_asy.o.  If unsure, say N.
-
-PCMCIA network device support
-CONFIG_NET_PCMCIA
-  Say Y if you would like to include support for any PCMCIA or CardBus
-  network adapters, then say Y to the driver for your particular card
-  below.  PCMCIA- or PC-cards are credit-card size devices often used
-  with laptops computers; CardBus is the newer and faster version of
-  PCMCIA.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).  You also want to check out the PCMCIA-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If unsure, say N.
-
-3Com 3c589 PCMCIA support
-CONFIG_PCMCIA_3C589
-  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
-  (PC-card) Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c589_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>. If
-  unsure, say N.
-
-3Com 3c574 PCMCIA support
-CONFIG_PCMCIA_3C574
-  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
-  (PC-card) Fast Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c574_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-Fujitsu FMV-J18x PCMCIA support
-CONFIG_PCMCIA_FMVJ18X
-  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
-  PCMCIA (PC-card) Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called fmvj18x_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-NE2000 compatible PCMCIA support
-CONFIG_PCMCIA_PCNET
-  Say Y here if you intend to attach an NE2000 compatible PCMCIA
-  (PC-card) Ethernet or Fast Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pcnet_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>. If
-  unsure, say N.
-
-New Media PCMCIA support
-CONFIG_PCMCIA_NMCLAN
-  Say Y here if you intend to attach a New Media Ethernet or LiveWire
-  PCMCIA (PC-card) Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called nmclan_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-SMC 91Cxx PCMCIA support
-CONFIG_PCMCIA_SMC91C92
-  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
-  (PC-card) Ethernet or Fast Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smc91c92_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-Xircom 16-bit PCMCIA support
-CONFIG_PCMCIA_XIRC2PS
-  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
-  Ethernet or Fast Ethernet card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called xirc2ps_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-COM20020 ARCnet PCMCIA support
-CONFIG_ARCNET_COM20020_CS
-  Say Y here if you intend to attach this type of ARCnet PCMCIA card
-  to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called com20020_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-IBM PCMCIA Token Ring adapter support
-CONFIG_PCMCIA_IBMTR
-  Say Y here if you intend to attach this type of Token Ring PCMCIA
-  card to your computer. You then also need to say Y to "Token Ring
-  driver support".
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ibmtr_cs.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Xircom Tulip-like CardBus support
-CONFIG_PCMCIA_XIRTULIP
-  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
-  It should work with most DEC 21*4*-based chips/ethercards, as well
-  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
-  ASIX.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called xircom_tulip_cb.o.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>. If unsure, say N.
-
-PCMCIA Wireless LAN
-CONFIG_NET_PCMCIA_RADIO
-  Say Y here if you would like to use a PCMCIA (PC-card) device to
-  connect to a wireless local area network. Then say Y to the driver
-  for your particular card below.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location). You also want to check out the PCMCIA-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-Hermes chipset 802.11b support (Orinoco/Prism2/Symbol cards)
-CONFIG_HERMES
-  A driver for 802.11b wireless cards based based on the "Hermes" or
-  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
-  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
-  - except for the Cisco/Aironet cards.  Cards supported include the
-  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
-  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
-  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
-  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
-  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
-
-  This option includes the guts of the driver, but in order to
-  actually use a card you will also need to enable support for PCMCIA
-  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
-
-  You will also very likely also need the Wireless Tools in order to
-  configure your card and that /etc/pcmcia/wireless.opts works :
-  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
-
-Hermes 802.11b in PLX9052 based PCI adaptor support
-CONFIG_PLX_HERMES
-  Enable support for PCMCIA cards supported by the "Hermes" (aka
-  orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These
-  adaptors are not a full PCMCIA controller but act as a more limited
-  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
-  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
-  MA301 is such an adaptor.
-
-  Support for these adaptors is so far still incomplete and buggy.
-  You have been warned.
-
-Hermes support (Orinoco/WavelanIEEE/PrismII/Symbol 802.11b cards)
-CONFIG_PCMCIA_HERMES
-  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
-  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
-  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
-  others).  It should also be usable on various Prism II based cards
-  such as the Linksys, D-Link and Farallon Skyline.  It should also
-  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).  You also want to check out the PCMCIA-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  You will also very likely also need the Wireless Tools in order to
-  configure your card and that /etc/pcmcia/wireless.opts works:
-  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards
-CONFIG_AIRO
-  This is the standard Linux driver to support Cisco/Aironet ISA and
-  PCI 802.11 wireless cards.
-  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-  - with or without encryption) as well as card before the Cisco
-  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
-  This driver support both the standard Linux Wireless Extensions
-  and Cisco proprietary API, so both the Linux Wireless Tools and the
-  Cisco Linux utilities can be used to configure the card.
-
-  The driver can be compiled as a module and will be named "airo.o".
-
-Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards
-CONFIG_AIRO_CS
-  This is the standard Linux driver to support Cisco/Aironet PCMCIA
-  802.11 wireless cards.  This driver is the same as the Aironet
-  driver part of the Linux Pcmcia package.
-  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
-  - with or without encryption) as well as card before the Cisco
-  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
-  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
-  802.11b cards.
-
-  This driver support both the standard Linux Wireless Extensions
-  and Cisco proprietary API, so both the Linux Wireless Tools and the
-  Cisco Linux utilities can be used to configure the card.
-
-  To use your PC-cards, you will need supporting software from David
-  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-  for location).  You also want to check out the PCMCIA-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-Aviator/Raytheon 2.4MHz wireless support
-CONFIG_PCMCIA_RAYCS
-  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
-  (PC-card) wireless Ethernet networking card to your computer.
-  Please read the file <file:Documentation/networking/ray_cs.txt> for
-  details.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ray_cs.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-Apple Airport support (built-in)
-CONFIG_APPLE_AIRPORT
-  Say Y here to support the Airport 802.11b wireless Ethernet hardware
-  built into the Macintosh iBook and other recent PowerPC-based
-  Macintosh machines. This is essentially a Lucent Orinoco card with 
-  a non-standard interface
-
-Xircom Netwave AirSurfer wireless support
-CONFIG_PCMCIA_NETWAVE
-  Say Y here if you intend to attach this type of PCMCIA (PC-card)
-  wireless Ethernet networking card to your computer.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called netwave_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-AT&T/Lucent Wavelan wireless support
-CONFIG_PCMCIA_WAVELAN
-  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
-  (PC-card) wireless Ethernet networking card to your computer.  This
-  driver is for the non-IEEE-802.11 Wavelan cards.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wavelan_cs.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-  If unsure, say N.
-
-PLIP (parallel port) support
-CONFIG_PLIP
-  PLIP (Parallel Line Internet Protocol) is used to create a
-  reasonably fast mini network consisting of two (or, rarely, more)
-  local machines.  A PLIP link from a Linux box is a popular means to
-  install a Linux distribution on a machine which doesn't have a
-  CD-ROM drive (a minimal system has to be transferred with floppies
-  first). The kernels on both machines need to have this PLIP option
-  enabled for this to work.
-
-  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
-  ports (the connectors at the computers with 25 holes) are connected
-  with "null printer" or "Turbo Laplink" cables which can transmit 4
-  bits at a time (mode 0) or with special PLIP cables, to be used on
-  bidirectional parallel ports only, which can transmit 8 bits at a
-  time (mode 1); you can find the wiring of these cables in
-  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
-  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
-  and has some PLIP software installed, e.g. the Crynwr PLIP packet
-  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
-  and winsock or NCSA's telnet.
-
-  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
-  as the NET-3-HOWTO, both available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Note that the PLIP
-  protocol has been changed and this PLIP driver won't work together
-  with the PLIP support in Linux versions 1.0.x.  This option enlarges
-  your kernel by about 8 KB.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called plip.o.  If unsure, say Y or M, in case you buy a laptop
-  later.
-
-EQL (serial line load balancing) support
-CONFIG_EQUALIZER
-  If you have two serial connections to some other computer (this
-  usually requires two modems and two telephone lines) and you use
-  SLIP (the protocol for sending Internet traffic over telephone
-  lines) or PPP (a better SLIP) on them, you can make them behave like
-  one double speed connection using this driver.  Naturally, this has
-  to be supported at the other end as well, either with a similar EQL
-  Linux driver or with a Livingston Portmaster 2e.
-
-  Say Y if you want this and read
-  <file:Documentation/networking/eql.txt>.  You may also want to read
-  section 6.2 of the NET-3-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called eql.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-Universal TUN/TAP device driver support
-CONFIG_TUN
-  TUN/TAP provides packet reception and transmission for user space
-  programs.  It can be viewed as a simple Point-to-Point or Ethernet
-  device, which instead of receiving packets from a physical media,
-  receives them from user space program and instead of sending packets
-  via physical media writes them to the user space program.
-
-  When a program opens /dev/net/tun, driver creates and registers
-  corresponding net device tunX or tapX.  After a program closed above
-  devices, driver will automatically delete tunXX or tapXX device and
-  all routes corresponding to it.
-
-  Please read <file:Documentation/networking/tuntap.txt> for more
-  information.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tun.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-  If you don't know what to use this for, you don't need it.
-
-Ethertap network tap (OBSOLETE)
-CONFIG_ETHERTAP
-  If you say Y here (and have said Y to "Kernel/User network link
-  driver", above) and create a character special file /dev/tap0 with
-  major number 36 and minor number 16 using mknod ("man mknod"), you
-  will be able to have a user space program read and write raw
-  Ethernet frames from/to that special file.  tap0 can be configured
-  with ifconfig and route like any other Ethernet device but it is not
-  connected to any physical LAN; everything written by the user to
-  /dev/tap0 is treated by the kernel as if it had come in from a LAN
-  to the device tap0; everything the kernel wants to send out over the
-  device tap0 can instead be read by the user from /dev/tap0: the user
-  mode program replaces the LAN that would be attached to an ordinary
-  Ethernet device. Please read the file
-  <file:Documentation/networking/ethertap.txt> for more information.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ethertap.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-  If you don't know what to use this for, you don't need it.
-
-Sealevel Systems 4021 support
-CONFIG_SEALEVEL_4021
-  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
-
-  This driver can only be compiled as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to do that, say M here. The module will be called
-  sealevel.o.
-
-SyncLink HDLC/SYNCPPP support
-CONFIG_SYNCLINK_SYNCPPP
-  Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-  Normally the SyncLink WAN driver works with the main PPP
-  driver (ppp.c) and pppd program. HDLC/SYNCPPP support allows use
-  of the Cisco HDLC/PPP driver (syncppp.c).
-  The SyncLink WAN driver (in character devices) must also be enabled.
-
-FarSync T-Series support
-CONFIG_FARSYNC
-  This driver supports the FarSync T-Series X.21 (and V.35/V.24) cards
-  from FarSite Communications Ltd.
-  Synchronous communication is supported on all ports at speeds up to
-  8Mb/s (128K on V.24) using synchronous PPP or Cisco HDLC.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  say M here and read <file:Documentation/modules.txt>.
-  The module will be called farsync.o and if you want the module to be
-  automatically loaded when the interface is referenced then you
-  should add "alias syncX farsync" to /etc/modules.conf for each
-  interface, where X is 0, 1, 2, ...
-
-Frame Relay (DLCI) support
-CONFIG_DLCI
-  This is support for the frame relay protocol; frame relay is a fast
-  low-cost way to connect to a remote Internet access provider or to
-  form a private wide area network. The one physical line from your
-  box to the local "switch" (i.e. the entry point to the frame relay
-  network, usually at the phone company) can carry several logical
-  point-to-point connections to other computers connected to the frame
-  relay network. For a general explanation of the protocol, check out
-  <http://www.frforum.com/> on the WWW. To use frame relay, you need
-  supporting hardware (called FRAD) and certain programs from the
-  net-tools package as explained in
-  <file:Documentation/networking/framerelay.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dlci.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Max open DLCI
-CONFIG_DLCI_COUNT
-  This is the maximal number of logical point-to-point frame relay
-  connections (the identifiers of which are called DCLIs) that
-  the driver can handle. The default is probably fine.
-
-Max DLCI per device
-CONFIG_DLCI_MAX
-  You can specify here how many logical point-to-point frame relay
-  connections (the identifiers of which are called DCLIs) should be
-  handled by each of your hardware frame relay access devices. Go with
-  the default.
-
-SDLA (Sangoma S502/S508) support
-CONFIG_SDLA
-  Say Y here if you need a driver for the Sangoma S502A, S502E, and
-  S508 Frame Relay Access Devices. These are multi-protocol cards, but
-  only frame relay is supported by the driver at this time. Please
-  read <file:Documentation/framerelay.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sdla.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Acorn Econet/AUN protocols
-CONFIG_ECONET
-  Econet is a fairly old and slow networking protocol mainly used by
-  Acorn computers to access file and print servers. It uses native
-  Econet network cards. AUN is an implementation of the higher level
-  parts of Econet that runs over ordinary Ethernet connections, on
-  top of the UDP packet protocol, which in turn runs on top of the
-  Internet protocol IP.
-
-  If you say Y here, you can choose with the next two options whether
-  to send Econet/AUN traffic over a UDP Ethernet connection or over
-  a native Econet network card.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called econet.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-AUN over UDP
-CONFIG_ECONET_AUNUDP
-  Say Y here if you want to send Econet/AUN traffic over a UDP
-  connection (UDP is a packet based protocol that runs on top of the
-  Internet protocol IP) using an ordinary Ethernet network card.
-
-Native Econet
-CONFIG_ECONET_NATIVE
-  Say Y here if you have a native Econet network card installed in
-  your computer.
-
-WAN router
-CONFIG_WAN_ROUTER
-  Wide Area Networks (WANs), such as X.25, frame relay and leased
-  lines, are used to interconnect Local Area Networks (LANs) over vast
-  distances with data transfer rates significantly higher than those
-  achievable with commonly used asynchronous modem connections.
-  Usually, a quite expensive external device called a `WAN router' is
-  needed to connect to a WAN.
-
-  As an alternative, WAN routing can be built into the Linux kernel.
-  With relatively inexpensive WAN interface cards available on the
-  market, a perfectly usable router can be built for less than half
-  the price of an external router.  If you have one of those cards and
-  wish to use your Linux box as a WAN router, say Y here and also to
-  the WAN driver for your card, below.  You will then need the
-  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
-  Read <file:Documentation/networking/wan-router.txt> for more
-  information.
-
-  The WAN routing support is also available as a module called
-  wanrouter.o ( = code which can be inserted in and removed from the
-  running kernel whenever you want).  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-Fast switching (read help!)
-CONFIG_NET_FASTROUTE
-  Saying Y here enables direct NIC-to-NIC (NIC = Network Interface
-  Card) data transfers on the local network, which is fast.
-
-  IMPORTANT NOTE: This option is NOT COMPATIBLE with "Network packet
-  filtering" (CONFIG_NETFILTER). Say N here if you say Y there.
-
-  However, it will work with all options in the "Advanced router"
-  section (except for "Use TOS value as routing key" and
-  "Use FWMARK value as routing key").
-
-  At the moment, few devices support fast switching (tulip is one of
-  them, a modified 8390 driver can be found at
-  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
-
-  If unsure, say N.
-
-Forwarding between high speed interfaces
-CONFIG_NET_HW_FLOWCONTROL
-  This option enables NIC (Network Interface Card) hardware throttling
-  during periods of extremal congestion. At the moment only a couple
-  of device drivers support it (really only one -- tulip, a modified
-  8390 driver can be found at
-  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
-
-  Really, this option is applicable to any machine attached to a fast
-  enough network, and even a 10 Mb NIC is able to kill a not very slow
-  box, such as a 120MHz Pentium.
-
-  However, do not say Y here if you did not experience any serious
-  problems.
-
-QoS and/or fair queueing
-CONFIG_NET_SCHED
-  When the kernel has several packets to send out over a network
-  device, it has to decide which ones to send first, which ones to
-  delay, and which ones to drop. This is the job of the packet
-  scheduler, and several different algorithms for how to do this
-  "fairly" have been proposed.
-
-  If you say N here, you will get the standard packet scheduler, which
-  is a FIFO (first come, first served). If you say Y here, you will be
-  able to choose from among several alternative algorithms which can
-  then be attached to different network devices. This is useful for
-  example if some of your network devices are real time devices that
-  need a certain minimum data flow rate, or if you need to limit the
-  maximum data flow rate for traffic which matches specified criteria.
-  This code is considered to be experimental.
-
-  To administer these schedulers, you'll need the user-level utilities
-  from the package iproute2+tc at <ftp://ftp.inr.ac.ru/ip-routing/>.
-  That package also contains some documentation; for more, check out
-  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
-
-  This Quality of Service (QoS) support will enable you to use
-  Differentiated Services (diffserv) and Resource Reservation Protocol
-  (RSVP) on your Linux router if you also say Y to "QoS support",
-  "Packet classifier API" and to some classifiers below. Documentation
-  and software is at <http://icawww1.epfl.ch/linux-diffserv/>.
-
-  If you say Y here and to "/proc file system" below, you will be able
-  to read status information about packet schedulers from the file
-  /proc/net/psched.
-
-  The available schedulers are listed in the following questions; you
-  can say Y to as many as you like. If unsure, say N now.
-
-CBQ packet scheduler
-CONFIG_NET_SCH_CBQ
-  Say Y here if you want to use the Class-Based Queueing (CBQ) packet
-  scheduling algorithm for some of your network devices.  This
-  algorithm classifies the waiting packets into a tree-like hierarchy
-  of classes; the leaves of this tree are in turn scheduled by
-  separate algorithms (called "disciplines" in this context).
-
-  See the top of <file:net/sched/sch_cbq.c> for references about the
-  CBQ algorithm.
-
-  CBQ is a commonly used scheduler, so if you're unsure, you should
-  say Y here. Then say Y to all the queueing algorithms below that you
-  want to use as CBQ disciplines.  Then say Y to "Packet classifier
-  API" and say Y to all the classifiers you want to use; a classifier
-  is a routine that allows you to sort your outgoing traffic into
-  classes based on a certain criterion.
-
-  This code is also available as a module called sch_cbq.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-CSZ packet scheduler
-CONFIG_NET_SCH_CSZ
-  Say Y here if you want to use the Clark-Shenker-Zhang (CSZ) packet
-  scheduling algorithm for some of your network devices.  At the
-  moment, this is the only algorithm that can guarantee service for
-  real-time applications (see the top of <file:net/sched/sch_csz.c>
-  for details and references about the algorithm).
-
-  Note: this scheduler is currently broken.
-
-  This code is also available as a module called sch_csz.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-ATM pseudo-scheduler
-CONFIG_NET_SCH_ATM
-  Say Y here if you want to use the ATM pseudo-scheduler.  This
-  provides a framework for invoking classifiers (aka "filters"), which
-  in turn select classes of this queuing discipline.  Each class maps
-  the flow(s) it is handling to a given virtual circuit (see the top of
-  <file:net/sched/sch_atm.c>).
-
-  This code is also available as a module called sch_atm.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-The simplest PRIO pseudo-scheduler
-CONFIG_NET_SCH_PRIO
-  Say Y here if you want to use an n-band priority queue packet
-  "scheduler" for some of your network devices or as a leaf discipline
-  for the CBQ scheduling algorithm. If unsure, say Y.
-
-  This code is also available as a module called sch_prio.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Diffserv field marker
-CONFIG_NET_SCH_DSMARK
-  Say Y if you want to schedule packets avccording to the
-  Differentiated Services architecture proposed in RFC 2475.
-  Technical information on this method, with pointers to associated
-  RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
-
-  This code is also available as a module called sch_dsmark.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-GRED queue
-CONFIG_NET_SCH_GRED
-  Say Y here if you want to use the Generic Random Early Detection
-  (RED) packet scheduling algorithm for some of your network devices
-  (see the top of <file:net/sched/sch_red.c> for details and
-  references about the algorithm).
-
-  This code is also available as a module called sch_gred.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-RED queue
-CONFIG_NET_SCH_RED
-  Say Y here if you want to use the Random Early Detection (RED)
-  packet scheduling algorithm for some of your network devices (see
-  the top of <file:net/sched/sch_red.c> for details and references
-  about the algorithm).
-
-  This code is also available as a module called sch_red.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-SFQ queue
-CONFIG_NET_SCH_SFQ
-  Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
-  packet scheduling algorithm for some of your network devices or as a
-  leaf discipline for the CBQ scheduling algorithm (see the top of
-  <file:net/sched/sch_sfq.c> for details and references about the SFQ
-  algorithm).
-
-  This code is also available as a module called sch_sfq.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-TEQL queue
-CONFIG_NET_SCH_TEQL
-  Say Y here if you want to use the True Link Equalizer (TLE) packet
-  scheduling algorithm for some of your network devices or as a leaf
-  discipline for the CBQ scheduling algorithm. This queueing
-  discipline allows the combination of several physical devices into
-  one virtual device. (see the top of <file:net/sched/sch_teql.c> for
-  details).
-
-  This code is also available as a module called sch_teql.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-TBF queue
-CONFIG_NET_SCH_TBF
-  Say Y here if you want to use the Simple Token Bucket Filter (TBF)
-  packet scheduling algorithm for some of your network devices or as a
-  leaf discipline for the CBQ scheduling algorithm (see the top of
-  <file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
-
-  This code is also available as a module called sch_tbf.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Ingress Qdisc
-CONFIG_NET_SCH_INGRESS
-  If you say Y here, you will be able to police incoming bandwidth
-  and drop packets when this bandwidth exceeds your desired rate.
-  If unsure, say Y.
-
-  This code is also available as a module called cls_ingress.o
-  ( = code which can be inserted in and removed from the running
-  kernel whenever you want).  If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-QoS support
-CONFIG_NET_QOS
-  Say Y here if you want to include Quality Of Service scheduling
-  features, which means that you will be able to request certain
-  rate-of-flow limits for your network devices.
-
-  This Quality of Service (QoS) support will enable you to use
-  Differentiated Services (diffserv) and Resource Reservation Protocol
-  (RSVP) on your Linux router if you also say Y to "Packet classifier
-  API" and to some classifiers below. Documentation and software is at
-  <http://icawww1.epfl.ch/linux-diffserv/>.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about QoS support.
-
-Rate estimator
-CONFIG_NET_ESTIMATOR
-  In order for Quality of Service scheduling to work, the current
-  rate-of-flow for a network device has to be estimated; if you say Y
-  here, the kernel will do just that.
-
-Packet classifier API
-CONFIG_NET_CLS
-  The CBQ scheduling algorithm requires that network packets which are
-  scheduled to be sent out over a network device be classified
-  according to some criterion. If you say Y here, you will get a
-  choice of several different packet classifiers with the following
-  questions.
-
-  This will enable you to use Differentiated Services (diffserv) and
-  Resource Reservation Protocol (RSVP) on your Linux router.
-  Documentation and software is at
-  <http://icawww1.epfl.ch/linux-diffserv/>.
-
-Traffic policing (needed for in/egress)
-CONFIG_NET_CLS_POLICE
-  Say Y to support traffic policing (bandwidth limits).  Needed for
-  ingress and egress rate limiting.
-
-TC index classifier
-CONFIG_NET_CLS_TCINDEX
-  If you say Y here, you will be able to classify outgoing packets
-  according to the tc_index field of the skb. You will want this
-  feature if you want to implement Differentiated Services using
-  sch_dsmark. If unsure, say Y.
-
-  This code is also available as a module called cls_tcindex.o
-  ( = code which can be inserted in and removed from the running
-  kernel whenever you want). If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-Routing tables based classifier
-CONFIG_NET_CLS_ROUTE4
-  If you say Y here, you will be able to classify outgoing packets
-  according to the route table entry they matched. If unsure, say Y.
-
-  This code is also available as a module called cls_route.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Firewall based classifier
-CONFIG_NET_CLS_FW
-  If you say Y here, you will be able to classify outgoing packets
-  according to firewall criteria you specified.
-
-  This code is also available as a module called cls_fw.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-U32 classifier
-CONFIG_NET_CLS_U32
-  If you say Y here, you will be able to classify outgoing packets
-  according to their destination address. If unsure, say Y.
-
-  This code is also available as a module called cls_u32.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Special RSVP classifier
-CONFIG_NET_CLS_RSVP
-  The Resource Reservation Protocol (RSVP) permits end systems to
-  request a minimum and maximum data flow rate for a connection; this
-  is important for real time data such as streaming sound or video.
-
-  Say Y here if you want to be able to classify outgoing packets based
-  on their RSVP requests.
-
-  This code is also available as a module called cls_rsvp.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Special RSVP classifier for IPv6
-CONFIG_NET_CLS_RSVP6
-  The Resource Reservation Protocol (RSVP) permits end systems to
-  request a minimum and maximum data flow rate for a connection; this
-  is important for real time data such as streaming sound or video.
-
-  Say Y here if you want to be able to classify outgoing packets based
-  on their RSVP requests and you are using the new Internet Protocol
-  IPv6 as opposed to the older and more common IPv4.
-
-  This code is also available as a module called cls_rsvp6.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want).  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Network code profiler
-CONFIG_NET_PROFILE
-  If you say Y here and to "/proc file system support" below, some
-  obscure and undocumented information about the network code's
-  performance will be written to /proc/net/profile. If you don't know
-  what it is about, you don't need it: say N.
-
-Wan interfaces support
-CONFIG_WAN
-  Wide Area Networks (WANs), such as X.25, frame relay and leased
-  lines, are used to interconnect Local Area Networks (LANs) over vast
-  distances with data transfer rates significantly higher than those
-  achievable with commonly used asynchronous modem connections.
-  Usually, a quite expensive external device called a `WAN router' is
-  needed to connect to a WAN.
-
-  As an alternative, a relatively inexpensive WAN interface card can
-  allow your Linux box to directly connect to a WAN. If you have one
-  of those cards and wish to use it under Linux, say Y here and also
-  to the WAN driver for your card, below.
-
-  If unsure, say N.
-
-Comtrol Hostess SV-11 support
-CONFIG_HOSTESS_SV11
-  This is a network card for low speed synchronous serial links, at
-  up to 256Kbps. It supports both PPP and Cisco HDLC.
-
-  At this point, the driver can only be compiled as a module.
-
-COSA/SRP sync serial board support
-CONFIG_COSA
-  This is a driver for COSA and SRP synchronous serial boards. These
-  boards allow to connect synchronous serial devices (for example
-  base-band modems, or any other device with the X.21, V.24, V.35 or
-  V.36 interface) to your Linux box. The cards can work as the
-  character device, synchronous PPP network device, or the Cisco HDLC
-  network device.
-
-  To actually use the COSA or SRP board, you will need user-space
-  utilities for downloading the firmware to the cards and to set them
-  up. Look at the <http://www.fi.muni.cz/~kas/cosa/> for more
-  information about the cards (including the pointer to the user-space
-  utilities). You can also read the comment at the top of the
-  <file:drivers/net/wan/cosa.c> for details about the cards and the driver
-  itself.
-
-  The driver will be compiled as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cosa.o. For general information about
-  modules read <file:Documentation/modules.txt>.
-
-Etinc PCISYNC serial board support
-CONFIG_DSCC4
-  This is a driver for Etinc PCISYNC boards based on the Infineon
-  (ex. Siemens) DSCC4 chipset. It is supposed to work with the four
-  ports card. Take a look at <http://www.cogenit.fr/dscc4/>
-  for further informations about the driver and his configuration.
-
-  The driver will be compiled as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dscc4.o. For general information about
-  modules read <file:Documentation/modules.txt>.
-
-LanMedia Corp. serial boards (SSI/V.35, T1/E1, HSSI, T3)
-CONFIG_LANMEDIA
-  This is a driver for the following Lan Media family of serial
-  boards.
-
-  LMC 1000 board allows you to connect synchronous serial devices (for
-  example base-band modems, or any other device with the X.21, V.24,
-  V.35 or V.36 interface) to your Linux box.
-
-  LMC 1200 with on board DSU board allows you to connect your Linux
-  box dirrectly to a T1 or E1 circuit.
-
-  LMC 5200 board provides a HSSI interface capable of running up to
-  52 mbits per second.
-
-  LMC 5245 board connects directly to a T3 circuit saving the
-  additional external hardware.
-
-  To change setting such as syncPPP vs cisco HDLC or clock source you
-  will need lmcctl.  It is available at <ftp://ftp.lanmedia.com/>.
-
-  This code is also available as a module called lmc.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Fibre Channel driver support
-CONFIG_NET_FC
-  Fibre Channel is a high speed serial protocol mainly used to connect
-  large storage devices to the computer; it is compatible with and
-  intended to replace SCSI.
-
-  If you intend to use Fibre Channel, you need to have a Fibre channel
-  adaptor card in your computer; say Y here and to the driver for your
-  adaptor below. You also should have said Y to "SCSI support" and
-  "SCSI generic support".
-
-Interphase 5526 Tachyon chipset based adaptor support
-CONFIG_IPHASE5526
-  Say Y here if you have a Fibre Channel adaptor of this kind.
-
-  The driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called iph5526.o. For general information about
-  modules read <file:Documentation/modules.txt>.
-
-Red Creek Hardware VPN
-CONFIG_RCPCI
-  This is a driver for hardware which provides a Virtual Private
-  Network (VPN). Say Y if you have it.
-
-  This code is also available as a module called rcpci.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Granch SBNI12 Leased Line adapter driver
-CONFIG_SBNI
-  This is a driver for ISA SBNI12-xx cards which are low cost
-  alternatives to leased line modems. Say Y if you want to insert
-  the driver into the kernel or say M to compile it as a module (the
-  module will be called sbni.o).
-
-  You can find more information and last versions of drivers and
-  utilities at <http://www.granch.ru/>. If you have any question you
-  can send email to sbni@granch.ru.
-
-  Say N if unsure.
-
-SBNI Adapters Multiline feature
-CONFIG_SBNI_MULTILINE
-  Schedule traffic for some parallel lines, via SBNI12 adapters.
-  If you have two computers connected with two parallel lines it's
-  possible to increase transfer rate nearly twice. You should have
-  a program named 'sbniconfig' to configure adapters.
-
-  Say N if unsure.
-
-WAN router drivers
-CONFIG_WAN_ROUTER_DRIVERS
-  If you have a WAN interface card and you want your Linux box to act
-  as a WAN router, thereby connecting you Local Area Network to the
-  outside world over the WAN connection, say Y here and then to the
-  driver for your card below. In addition, you need to say Y to "Wan
-  Router".
-
-  You will need the wan-tools package which is available from
-  <ftp://ftp.sangoma.com/>. Read
-  <file:Documentation/networking/wan-router.txt> for more information.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about WAN router drivers. If unsure, say N.
-
-Sangoma WANPIPE(tm) multiprotocol cards
-CONFIG_VENDOR_SANGOMA
-  WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
-  is a family of intelligent multiprotocol WAN adapters with data
-  transfer rates up to 4Mbps. They are also known as Synchronous
-  Data Link Adapters (SDLA) and are designated as S514-PCI or
-  S508-ISA.  These cards support
-
-    - X.25, Frame Relay, PPP, Cisco HDLC protocols.
-
-    - API support for protocols like HDLC (LAPB),
-      HDLC Streaming, X.25, Frame Relay and BiSync.
-
-    - Ethernet Bridging over Frame Relay protocol.
-
-    - MULTILINK PPP
-
-    - Async PPP (Modem Dialup)
-
-  If you have one or more of these cards, say M to this option; you
-  may then also want to read the file
-  <file:Documentation/networking/wanpipe.txt>.  The next questions
-  will ask you about the protocols you want the driver to support.
-
-  The driver will be compiled as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wanpipe.o.  For general information about
-  modules read <file:Documentation/modules.txt>.
-
-WANPIPE X.25 support
-CONFIG_WANPIPE_X25
-  Say Y to this option if you are planning to connect a WANPIPE card
-  to an X.25 network.  Note, this feature also includes the X.25 API
-  support used to develope custom applications over the X.25 protocol.
-  If you say N, the X.25 support will not be included in the driver.
-  The X.25 option is supported on S514-PCI and S508-ISA cards.
-
-WANPIPE Frame Relay support
-CONFIG_WANPIPE_FR
-  Say Y to this option if you are planning to connect a WANPIPE card
-  to a frame relay network, or use frame relay API to develope
-  custom applications over the Frame  Relay protocol.
-  This feature also contains the Ethernet Bridging over Frame Relay,
-  where a WANPIPE frame relay link can be directly connected to the
-  Linux kernel bridge.  If you say N, the frame relay support will
-  not be included in the driver. The Frame Relay option is
-  supported on S514-PCI and S508-ISA cards.
-
-WANPIPE PPP support
-CONFIG_WANPIPE_PPP
-  Say Y to this option if you are planning to connect a WANPIPE card
-  to a leased line using Point-to-Point protocol (PPP). If you say N,
-  the PPP support will not be included in the driver. The PPP option
-  is supported on S514-PCI/S508-ISA cards.
-
-WANPIPE Multi-Port PPP support
-CONFIG_WANPIPE_MULTPPP
-  Say Y to this option if you are planning to connect a WANPIPE card
-  to a leased line using Point-to-Point protocol (PPP).  Note, the
-  MultiPort PPP uses the Linux Kernel SyncPPP protocol over the
-  Sangoma HDLC Streaming adapter.  In this case each Sangoma adapter
-  port can support an independent PPP connection.  For example, a
-  single Quad-Port PCI adapter can support up to four independent
-  PPP links. If you say N,the PPP support will not be included in the
-  driver.  The PPP option is supported on S514-PCI/S508-ISA cards.
-
-WANPIPE Cisco HDLC support
-CONFIG_WANPIPE_CHDLC
-  Say Y to this option if you are planning to connect a WANPIPE card
-  to a leased line using the Cisco HDLC protocol. This now supports
-  Dual Port Cisco HDLC on the S514-PCI/S508-ISA cards.
-  This support also allows user to build applications using the
-  HDLC streaming API.
-
-  CHDLC Streaming driver also supports MULTILINK PPP
-  support that can bind multiple WANPIPE T1 cards into
-  a single logical channel.
-
-  If you say  N, the Cisco HDLC support and
-  HDLC streaming API and MULTILINK PPP will not be
-  included in the driver.
-
-MultiGate (COMX) synchronous serial board support
-CONFIG_COMX
-  Say Y if you want to use any board from the MultiGate (COMX) family.
-  These boards are synchronous serial adapters for the PC,
-  manufactured by ITConsult-Pro Co, Hungary.
-
-  Read <file:Documentation/networking/comx.txt> for help on
-  configuring and using COMX interfaces.  Further info on these cards
-  can be found at <http://www.itc.hu/> or <info@itc.hu>.
-
-  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
-  use this driver.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called comx.o.
-
-Support for COMX/CMX/HiCOMX boards
-CONFIG_COMX_HW_COMX
-  Hardware driver for the 'CMX', 'COMX' and 'HiCOMX' boards from the
-  MultiGate family. Say Y if you have one of these.
-
-  You will need additional firmware to use these cards, which are
-  downloadable from <ftp://ftp.itc.hu/>.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  comx-hw-comx.o.
-
-Support for LoCOMX board
-CONFIG_COMX_HW_LOCOMX
-  Hardware driver for the 'LoCOMX' board from the MultiGate family.
-  Say Y if you have a board like this.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  comx-hw-locomx.o.
-
-Support for MixCOM board
-CONFIG_COMX_HW_MIXCOM
-  Hardware driver for the 'MixCOM' board from the MultiGate family.
-  Say Y if you have a board like this.
-
-  If you want to use the watchdog device on this card, you should
-  select it in the Watchdog Cards section of the Character Devices
-  configuration. The ISDN interface of this card is Teles 16.3
-  compatible, you should enable it in the ISDN configuration menu. The
-  driver for the flash ROM of this card is available separately on
-  <ftp://ftp.itc.hu/>.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>. The module will be called
-  comx-hw-mixcom.o.
-
-i810 TCO timer/watchdog support
-CONFIG_I810_TCO
-  Hardware driver for the TCO timer built into the Intel i810 and i815
-  chipset family.  The TCO (Total Cost of Ownership) timer is a
-  watchdog timer that will reboot the machine after its second
-  expiration. The expiration time can be configured by commandline
-  argument "i810_margin=<n>" where <n> is the counter initial value.
-  It is decremented every 0.6 secs, the default is 50 which gives a
-  timeout of 30 seconds and one minute until reset.
-
-  On some motherboards the driver may fail to reset the chipset's
-  NO_REBOOT flag which prevents the watchdog from rebooting the
-  machine. If this is the case you will get a kernel message like
-  "i810tco init: failed to reset NO_REBOOT flag".
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  i810-tco.o.
-
-Support for HDLC and syncPPP protocols on MultiGate boards
-CONFIG_COMX_PROTO_PPP
-  Cisco-HDLC and synchronous PPP protocol driver for all MultiGate
-  boards. Say Y if you want to use either protocol on your MultiGate
-  boards.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  comx-proto-ppp.o.
-
-Support for LAPB protocol on MultiGate boards
-CONFIG_COMX_PROTO_LAPB
-  LAPB protocol driver for all MultiGate boards. Say Y if you
-  want to use this protocol on your MultiGate boards.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  comx-proto-lapb.o.
-
-Support for Frame Relay on MultiGate boards
-CONFIG_COMX_PROTO_FR
-  Frame Relay protocol driver for all MultiGate boards. Say Y if you
-  want to use this protocol on your MultiGate boards.
-
-  If you want to compile this as a module, say M and read
-  <file:Documentation/modules.txt>.  The module will be called
-  comx-proto-fr.o.
-
-Cyclom 2X(tm) multiprotocol cards
-CONFIG_CYCLADES_SYNC
-  Cyclom 2X from Cyclades Corporation (<http://www.cyclades.com/> and
-  <http://www.cyclades.com.br/>) is an intelligent multiprotocol WAN
-  adapter with data transfer rates up to 512 Kbps. These cards support
-  the X.25 and SNA related protocols. If you have one or more of these
-  cards, say Y to this option. The next questions will ask you about
-  the protocols you want the driver to support (for now only X.25 is
-  supported).
-
-  While no documentation is available at this time please grab the
-  wanconfig tarball in
-  <http://www.conectiva.com.br/~acme/cycsyn-devel/> (with minor changes
-  to make it compile with the current wanrouter include files; efforts
-  are being made to use the original package available at
-  <ftp://ftp.sangoma.com/>).
-
-  Feel free to contact me or the cycsyn-devel mailing list at
-  acme@conectiva.com.br and cycsyn-devel@bazar.conectiva.com.br for
-  additional details, I hope to have documentation available as soon
-  as possible. (Cyclades Brazil is writing the Documentation).
-
-  The driver will be compiled as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cyclomx.o. For general information about
-  modules read <file:Documentation/modules.txt>.
-
-Cyclom 2X X.25 support
-CONFIG_CYCLOMX_X25
-  Say Y to this option if you are planning to connect a Cyclom 2X card
-  to an X.25 network.
-
-  If you say N, the X.25 support will not be included in the driver
-  (saves about 11 KB of kernel memory).
-
-Generic HDLC driver
-CONFIG_HDLC
-  Say Y to this option if your Linux box contains a WAN card supported
-  by this driver and you are planning to connect the box to a WAN
-  ( = Wide Area Network). You will need supporting software from
-  <http://hq.pm.waw.pl/hdlc/>.
-  Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
-  Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
-
-  If unsure, say N here.
-
-Raw HDLC support
-CONFIG_HDLC_RAW
-  Say Y to this option if you want generic HDLC driver to support
-  raw HDLC over WAN (Wide Area Network) connections.
-
-  If unsure, say N here.
-
-Cisco HDLC support
-CONFIG_HDLC_CISCO
-  Say Y to this option if you want generic HDLC driver to support
-  Cisco HDLC over WAN (Wide Area Network) connections.
-
-  If unsure, say N here.
-
-Frame-Relay HDLC support
-CONFIG_HDLC_FR
-  Say Y to this option if you want generic HDLC driver to support
-  Frame-Relay protocol over WAN (Wide Area Network) connections.
-
-  If unsure, say N here.
-
-Frame-Relay bridging support
-CONFIG_HDLC_FR_BRIDGE
-  Say Y to this option if you want generic HDLC driver to support
-  bridging LAN frames over Frame-Relay links.
-
-  If unsure, say N here.
-
-Synchronous Point-to-Point Protocol (PPP) support
-CONFIG_HDLC_PPP
-  Say Y to this option if you want generic HDLC driver to support
-  PPP over WAN (Wide Area Network) connections.
-
-  If unsure, say N here.
-
-CCITT X.25 over HDLC support
-CONFIG_HDLC_X25
-  Say Y to this option if you want generic HDLC driver to support
-  X.25 protocol over WAN (Wide Area Network) connections.
-
-  If unsure, say N here.
-
-SDL RISCom/N2 support
-CONFIG_N2
-  This driver is for RISCom/N2 single or dual channel ISA cards
-  made by SDL Communications Inc.  If you have such a card,
-  say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>.
-
-  Note that N2csu and N2dds cards are not supported by this driver.
-
-  If unsure, say N here.
-
-Moxa C101 support
-CONFIG_C101
-  This driver is for C101 SuperSync ISA cards made by Moxa
-  Technologies Co., Ltd. If you have such a card,
-  say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>
-
-  If unsure, say N here.
-
-Ethernet (10 or 100Mbit)
-CONFIG_NET_ETHERNET
-  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
-  type of Local Area Network (LAN) in universities and companies.
-
-  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
-  coaxial cable, linking computers in a chain), 10BASE-T or twisted
-  pair (10 Mbps over twisted pair cable, linking computers to central
-  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
-  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
-  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
-  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
-  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
-  Ethernet (1 Gbps over optical fiber or short copper links).
-
-  If your Linux machine will be connected to an Ethernet and you have
-  an Ethernet network interface card (NIC) installed in your computer,
-  say Y here and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. You will then also have
-  to say Y to the driver for your particular NIC.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about Ethernet network cards. If unsure, say N.
-
-Western Digital/SMC cards
-CONFIG_NET_VENDOR_SMC
-  If you have a network (Ethernet) card belonging to this class, say Y
-  and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about Western Digital cards. If you say Y, you will be
-  asked for your specific card in the following questions.
-
-WD80*3 support
-CONFIG_WD80x3
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-SMC Ultra MCA support
-CONFIG_ULTRAMCA
-  If you have a network (Ethernet) card of this type and are running
-  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smc-mca.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-SMC Ultra support
-CONFIG_ULTRA
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Important: There have been many reports that, with some motherboards
-  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
-  such as some BusLogic models) causes corruption problems with many
-  operating systems. The Linux smc-ultra driver has a work-around for
-  this but keep it in mind if you have such a SCSI card and have
-  problems.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smc-ultra.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-SMC Ultra32 EISA support
-CONFIG_ULTRA32
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smc-ultra32.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-SMC 9194 support
-CONFIG_SMC9194
-  This is support for the SMC9xxx based Ethernet cards. Choose this
-  option if you have a DELL laptop with the docking station, or
-  another SMC9192/9194 based chipset.  Say Y if you want it compiled
-  into the kernel, and read the file
-  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smc9194.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-PCI NE2000 and clones support
-CONFIG_NE2K_PCI
-  This driver is for NE2000 compatible PCI cards. It will not work
-  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
-  support" below). If you have a PCI NE2000 network (Ethernet) card,
-  say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver also works for the following NE2000 clone cards:
-    RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
-    NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
-    Holtek HT80232    Holtek HT80229
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ne2k-pci.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-Racal-Interlan (Micom) NI cards
-CONFIG_NET_VENDOR_RACAL
-  If you have a network (Ethernet) card belonging to this class, such
-  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about NI cards. If you say Y, you will be asked for
-  your specific card in the following questions.
-
-NI5010 support
-CONFIG_NI5010
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. Note that this is still
-  experimental code.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ni5010.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-NI5210 support
-CONFIG_NI52
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ni52.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-NI6510 support
-CONFIG_NI65
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ni65.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-RealTek RTL-8139C+ 10/100 PCI Fast Ethernet Adapter support
-CONFIG_8139CP
-  This is a driver for the Fast Ethernet PCI network cards based on
-  the RTL8139C+ chips. If you have one of those, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read Documentation/modules.txt. This is recommended.
-  The module will be called 8139cp.o.
-
-RealTek RTL-8139 PCI Fast Ethernet Adapter support
-CONFIG_8139TOO
-  This is a driver for the Fast Ethernet PCI network cards based on
-  the RTL8139 chips. If you have one of those, say Y and read
-  <file:Documentation/networking/8139too.txt> as well as the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called 8139too.o.
-
-Use PIO instead of MMIO
-CONFIG_8139TOO_PIO
-  This instructs the driver to use programmed I/O ports (PIO) instead
-  of PCI shared memory (MMIO).  This can possibly solve some problems
-  in case your mainboard has memory consistency issues.  If unsure,
-  say N.
-
-Support for automatic channel equalization
-CONFIG_8139TOO_TUNE_TWISTER
-  This implements a function which might come in handy in case you are
-  using low quality on long cabling. It tries to match the transceiver
-  to the cable characteristics. This is experimental since hardly
-  documented by the manufacturer.  If unsure, say N.
-
-Support for older RTL-8129/8130 boards
-CONFIG_8139TOO_8129
-  This enables support for the older and uncommon RTL-8129 and
-  RTL-8130 chips, which support MII via an external transceiver,
-  instead of an internal one.  Disabling this option will save some
-  memory by making the code size smaller.  If unsure, say Y.
-
-SiS 900/7016 PCI Fast Ethernet Adapter support
-CONFIG_SIS900
-  This is a driver for the Fast Ethernet PCI network cards based on
-  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-  SiS 630 and SiS 540 chipsets.  If you have one of those, say Y and
-  read the Ethernet-HOWTO, available at
-  <http://www.linuxdoc.org/docs.html#howto>.  Please read
-  <file:Documentation/networking/sis900.txt> and comments at the
-  beginning of <file:drivers/net/sis900.c> for more information.
-
-  This driver also supports AMD 79C901 HomePNA so that you can use
-  your phone line as a network cable.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called sis900.o.
-
-Packet Engines Yellowfin Gigabit-NIC / Symbios 53c885 support
-CONFIG_YELLOWFIN
-  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
-  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
-  used by the Beowulf Linux cluster project.  See
-  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
-  information about this driver in particular and Beowulf in general.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called yellowfin.o.
-
-General Instruments Surfboard 1000
-CONFIG_NET_SB1000
-  This is a driver for the General Instrument (also known as
-  NextLevel) SURFboard 1000 internal
-  cable modem. This is an ISA card which is used by a number of cable
-  TV companies to provide cable modem access. It's a one-way
-  downstream-only cable modem, meaning that your upstream net link is
-  provided by your regular phone modem.
-
-  At present this driver only compiles as a module, so say M here if
-  you have this card. The module will be called sb1000.o. Then read
-  <file:Documentation/networking/README.sb1000> for information on how
-  to use this module, as it needs special ppp scripts for establishing
-  a connection. Further documentation and the necessary scripts can be
-  found at:
-
-  <http://www.jacksonville.net/~fventuri/>
-  <http://home.adelphia.net/~siglercm/sb1000.html>
-  <http://linuxpower.cx/~cable/>
-
-  If you don't have this card, of course say N.
-
-Adaptec Starfire support
-CONFIG_ADAPTEC_STARFIRE
-  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
-  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
-  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
-  driver.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called starfire.o.
-
-Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support
-CONFIG_ACENIC
-  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
-  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
-  adapter. The driver allows for using the Jumbo Frame option (9000
-  bytes/frame) however it requires that your switches can handle this
-  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
-  line.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called acenic.o.
-
-Omit support for old Tigon I based AceNICs
-CONFIG_ACENIC_OMIT_TIGON_I
-  Say Y here if you only have Tigon II based AceNICs and want to leave
-  out support for the older Tigon I based cards which are no longer
-  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
-  version)).  This will reduce the size of the driver object by
-  app. 100KB.  If you are not sure whether your card is a Tigon I or a
-  Tigon II, say N here.
-
-  The safe and default value for this is N.
-
-SysKonnect SK-98xx support
-CONFIG_SK98LIN
-  Say Y here if you have a SysKonnect SK-98xx Gigabit Ethernet Server
-  Adapter. The following adapters are supported by this driver:
-  - SK-9841 (single link 1000Base-LX)
-  - SK-9842 (dual link   1000Base-LX)
-  - SK-9843 (single link 1000Base-SX)
-  - SK-9844 (dual link   1000Base-SX)
-  - SK-9821 (single link 1000Base-T)
-  - SK-9822 (dual link   1000Base-T)
-  - SK-9861 (single link Volition connector)
-  - SK-9862 (dual link   Volition connector)
-  The driver also supports the following adapters from Allied Telesyn:
-  - AT2970...
-
-  The dual link adapters support a link-failover feature.  Read
-  <file:Documentation/networking/sk98lin.txt> for information about
-  optional driver parameters.
-  Questions concerning this driver may be addressed to:
-    linux@syskonnect.de
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called sk98lin.o.
-
-Sun GEM support
-CONFIG_SUNGEM
-  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
-  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
-
-MyriCOM Gigabit Ethernet support
-CONFIG_MYRI_SBUS
-  This driver supports MyriCOM Sbus gigabit Ethernet cards.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called myri_sbus.o.
-
-D-Link 2000-based Gigabit Ethernet support
-CONFIG_DL2K
-  This driver supports D-Link 2000-based gigabit ethernet cards, which
-  includes
-       D-Link DGE-550T Gigabit Ethernet Adapter.
-       D-Link DL2000-based Gigabit Ethernet Adapter.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called dl2k.o.
-
-AMD LANCE and PCnet (AT1500 and NE2100) support
-CONFIG_LANCE
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. Some LinkSys cards are
-  of this type.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called lance.o.
-
-SGI IOC3 Ethernet
-CONFIG_SGI_IOC3_ETH
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-National Semiconductor DP83902AV support
-CONFIG_STNIC
-  Support for cards based on the National Semiconductor DP83902AV
-  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
-  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
-  <http://www.national.com/pf/DP/DP83902A.html>.
-
-  If unsure, say N.
-
-3COM cards
-CONFIG_NET_VENDOR_3COM
-  If you have a network (Ethernet) card belonging to this class, say Y
-  and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about 3COM cards. If you say Y, you will be asked for
-  your specific card in the following questions.
-
-3c501 "EtherLink" support
-CONFIG_EL1
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Also, consider buying a
-  new card, since the 3c501 is slow, broken, and obsolete: you will
-  have problems.  Some people suggest to ping ("man ping") a nearby
-  machine every minute ("man cron") when using this card.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c501.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-3c503 "EtherLink II" support
-CONFIG_EL2
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c503.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-3c505 "EtherLink Plus" support
-CONFIG_ELPLUS
-  Information about this network (Ethernet) card can be found in
-  <file:Documentation/networking/3c505.txt>.  If you have a card of
-  this type, say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called 3c505.o.
-
-3c507 (EtherLink 16) support
-CONFIG_EL16
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c507.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-3c523 "EtherlinkMC" support
-CONFIG_ELMC
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c523.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-3c527 "EtherLink/MC 32" support
-CONFIG_ELMC_II
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called 3c527.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-3c509/3c529 (MCA)/3c579 "EtherLink III"  support
-CONFIG_EL3
-  If you have a network (Ethernet) card belonging to the 3Com
-  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
-  from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If your card is not working you may need to use the DOS
-  setup disk to disable Plug & Play mode, and to select the default
-  media type.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called 3c509.o.
-
-3c515 ISA Fast EtherLink
-CONFIG_3C515
-  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
-  network card, say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called 3c515.o.
-
-3c590/3c900 series (592/595/597) "Vortex/Boomerang/Cyclone" support
-CONFIG_VORTEX
-  This option enables driver support for a large number of 10mbps and
-  10/100mbps EISA, PCI and PCMCIA 3Com network cards:
-
-  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
-  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
-  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
-  "Tornado"   (3c905)                                  PCI
-  "Hurricane" (3c555/3cSOHO)                           PCI
-
-  If you have such a card, say Y and read the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>. More
-  specific information is in
-  <file:Documentation/networking/vortex.txt> and in the comments at
-  the beginning of <file:drivers/net/3c59x.c>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.
-
-Other ISA cards
-CONFIG_NET_ISA
-  If your network (Ethernet) card hasn't been mentioned yet and its
-  bus system (that's the way the cards talks to the other components
-  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
-  Make sure you know the name of your card. Read the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If unsure, say Y.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the remaining ISA network card questions. If you say Y, you will be
-  asked for your specific card in the following questions.
-
-Generic ARCnet support
-CONFIG_ARCNET
-  If you have a network card of this type, say Y and check out the
-  (arguably) beautiful poetry in
-  <file:Documentation/networking/arcnet.txt>.
-
-  You need both this driver, and the driver for the particular ARCnet
-  chipset of your card. If you don't know, then it's probably a
-  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
-  support" below.
-
-  You might also want to have a look at the Ethernet-HOWTO, available
-  from <http://www.linuxdoc.org/docs.html#howto>(even though ARCnet
-  is not really Ethernet).
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called arcnet.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Enable old ARCNet packet format (RFC 1051)
-CONFIG_ARCNET_1051
-  This allows you to use RFC1051 with your ARCnet card via the virtual
-  arc0s device. You only need arc0s if you want to talk to ARCnet
-  software complying with the "old" standard, specifically, the DOS
-  arcnet.com packet driver, Amigas running AmiTCP, and some variants
-  of NetBSD. You do not need to say Y here to communicate with
-  industry-standard RFC1201 implementations, like the arcether.com
-  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
-  automatically as the arc0 device. Please read the ARCnet
-  documentation in <file:Documentation/networking/arcnet.txt> for more
-  information about using arc0e and arc0s.
-
-Enable standard ARCNet packet format (RFC 1201)
-CONFIG_ARCNET_1201
-  This allows you to use RFC1201 with your ARCnet card via the virtual
-  arc0 device.  You need to say Y here to communicate with
-  industry-standard RFC1201 implementations, like the arcether.com
-  packet driver or most DOS/Windows ODI drivers.  Please read the
-  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
-  for more information about using arc0.
-
-Enable raw mode packet interface
-CONFIG_ARCNET_RAW
-  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
-  to work unless talking to a copy of the same Linux arcnet driver,
-  but perhaps marginally faster in that case.
-
-ARCnet COM90xx (normal) chipset driver
-CONFIG_ARCNET_COM90xx
-  This is the chipset driver for the standard COM90xx cards. If you
-  have always used the old ARCnet driver without knowing what type of
-  card you had, this is probably the one for you.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called com90xx.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-ARCnet COM90xx (IO mapped) chipset driver
-CONFIG_ARCNET_COM90xxIO
-  This is the chipset driver for the COM90xx cards, using them in
-  IO-mapped mode instead of memory-mapped mode. This is slower than
-  the normal driver. Only use it if your card doesn't support shared
-  memory.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called com90io.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-ARCnet COM90xx (RIM I) chipset driver
-CONFIG_ARCNET_RIM_I
-  This is yet another chipset driver for the COM90xx cards, but this
-  time only using memory-mapped mode, and no IO ports at all. This
-  driver is completely untested, so if you have one of these cards,
-  please mail dwmw2@infradead.org, especially if it works!
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module will be called arc-rimi.o.  If you want to compile
-  it as a module, say M here and read <file:Documentation/modules.txt>
-  as  well as <file:Documentation/networking/net-modules.txt>.
-
-ARCnet COM20020 chipset driver
-CONFIG_ARCNET_COM20020
-  This is the driver for the new COM20020 chipset. It supports such
-  things as promiscuous mode, so packet sniffing is possible, and
-  extra diagnostic information.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called com20020.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-Cabletron E21xx support
-CONFIG_E2100
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called e2100.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-CS89x0 support (Daynaport CS and LC cards)
-CONFIG_CS89x0
-  Support for CS89x0 chipset based Ethernet cards. If you have a
-  network (Ethernet) card of this type, say Y and read the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto> as well as
-  <file:Documentation/networking/cs89x0.txt>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called cs89x.o.
-
-DEPCA, DE10x, DE200, DE201, DE202, DE422 support
-CONFIG_DEPCA
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto> as well as
-  <file:drivers/net/depca.c>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called
-  depca.o.
-
-EtherWORKS 3 (DE203, DE204, DE205) support
-CONFIG_EWRK3
-  This driver supports the DE203, DE204 and DE205 network (Ethernet)
-  cards. If this is for you, say Y and read
-  <file:Documentation/networking/ewrk3.txt> in the kernel source as
-  well as the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called ewrk3.o.
-
-SEEQ8005 support
-CONFIG_SEEQ8005
-  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
-  is for you, read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called ewrk3.o.
-
-AT1700/1720 support
-CONFIG_AT1700
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called at1700.o.
-
-FMV-181/182/183/184 support
-CONFIG_FMV18X
-  If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
-  say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you use an FMV-183 or FMV-184 and it is not working, you may need
-  to disable Plug & Play mode of the card.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called fmv18x.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-EtherExpressPro and EtherExpress 10 (i82595) support
-CONFIG_EEXPRESS_PRO
-  If you have a network (Ethernet) card of this type, say Y. This
-  driver supports intel i82595{FX,TX} based boards. Note however
-  that the EtherExpress PRO/100 Ethernet card has its own separate
-  driver.  Please read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called eepro.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-EtherExpress 16 support
-CONFIG_EEXPRESS
-  If you have an EtherExpress16 network (Ethernet) card, say Y and
-  read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Note that the Intel
-  EtherExpress16 card used to be regarded as a very poor choice
-  because the driver was very unreliable. We now have a new driver
-  that should do better.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called eexpress.o.
-
-Packet Engines Hamachi GNIC-II support
-CONFIG_HAMACHI
-  If you have a Gigabit Ethernet card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called hamachi.o.
-
-HP PCLAN+ (27247B and 27252A) support
-CONFIG_HPLAN_PLUS
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called hp-plus.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-HP PCLAN (27245 and other 27xxx series) support
-CONFIG_HPLAN
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called hp.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-HP 10/100VG PCLAN (ISA, EISA, PCI) support
-CONFIG_HP100
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called hp100.o.
-
-NE2000/NE1000 support
-CONFIG_NE2000
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Many Ethernet cards
-  without a specific driver are compatible with NE2000.
-
-  If you have a PCI NE2000 card however, say N here and Y to "PCI
-  NE2000 support", above. If you have a NE2000 card and are running on
-  an MCA system (a bus system used on some IBM PS/2 computers and
-  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
-  below.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ne.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-National Semiconductor DP8381x series PCI Ethernet support
-CONFIG_NATSEMI
-  This driver is for the National Semiconductor DP83810 series,
-  which is used in cards from PureData, NetGear, Linksys
-  and others, including the 83815 chip.
-  More specific information and updates are available from
-  <http://www.scyld.com/network/natsemi.html>.
-
-SK_G16 support
-CONFIG_SK_G16
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-NE/2 (ne2000 MCA version) support
-CONFIG_NE2_MCA
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ne2.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-SKnet MCA support
-CONFIG_SKMC
-  These are Micro Channel Ethernet adapters. You need to say Y to "MCA
-  support" in order to use this driver.  Supported cards are the SKnet
-  Junior MC2 and the SKnet MC2(+).  The driver automatically
-  distinguishes between the two cards. Note that using multiple boards
-  of different type hasn't been tested with this driver.  Say Y if you
-  have one of these Ethernet adapters.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called sk_mca.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-IBM LAN Adapter/A support
-CONFIG_IBMLANA
-  This is a Micro Channel Ethernet adapter.  You need to set
-  CONFIG_MCA to use this driver.  It is both available as an in-kernel
-  driver and as a module ( = code which can be inserted in and removed
-  from the running kernel whenever you want).  If you want to compile
-  it as a module, say M here and read <file:Documentation/modules.txt>
-  as well as <file:Documentation/networking/net-modules.txt>. The only
-  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
-  will both support 16K and 32K memory windows, however a 32K window
-  gives a better security against packet losses.  Usage of multiple
-  boards with this driver should be possible, but has not been tested
-  up to now due to lack of hardware.
-
-EISA, VLB, PCI and on board controllers
-CONFIG_NET_PCI
-  This is another class of network cards which attach directly to the
-  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about this class of network cards. If you say Y, you
-  will be asked for your specific card in the following questions. If
-  you are unsure, say Y.
-
-AMD PCnet32 (VLB and PCI) support
-CONFIG_PCNET32
-  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
-  answer Y here and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pcnet32.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Ansel Communications EISA 3200 support
-CONFIG_AC3200
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ac3200.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Mylex EISA LNE390A/LNE390B support
-CONFIG_LNE390
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called lne390.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Novell/Eagle/Microdyne NE3210 EISA support
-CONFIG_NE3210
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  Note that this driver
-  will NOT WORK for NE3200 cards as they are completely different.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ne3210.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Apricot Xen-II on board Ethernet
-CONFIG_APRICOT
-  If you have a network (Ethernet) controller of this type, say Y and
-  read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  The module will be
-  called apricot.o.
-
-Generic DECchip & DIGITAL EtherWORKS PCI/EISA
-CONFIG_DE4X5
-  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
-  These include the DE425, DE434, DE435, DE450 and DE500 models.  If
-  you have a network card of this type, say Y and read the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. More specific
-  information is contained in
-  <file:Documentation/networking/de4x5.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called de4x5.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-DECchip Tulip (dc21x4x) PCI support
-CONFIG_TULIP
-  This driver is developed for the SMC EtherPower series Ethernet
-  cards and also works with cards based on the DECchip 
-  21040/21041/21140 (Tulip series) chips.  Some LinkSys PCI cards are
-  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
-  (smc9332dst), you can also try the driver for "Generic DECchip"
-  cards, above.  However, most people with a network card of this type
-  will say Y here.) Do read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  More specific
-  information is contained in 
-  <file:Documentation/networking/tulip.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tulip.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-New Tulip bus configuration
-CONFIG_TULIP_MWI 
-  This configures your Tulip card specifically for the card and
-  system cache line size type you are using.
-
-  This is experimental code, not yet tested on many boards.
-
-  If unsure, say N.
-
-Digi Intl. RightSwitch SE-X support
-CONFIG_DGRS
-  This is support for the Digi International RightSwitch series of
-  PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
-  models.  If you have a network card of this type, say Y and read the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.  More specific
-  information is contained in <file:Documentation/networking/dgrs.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dgrs.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-EtherExpress Pro/100 support
-CONFIG_EEPRO100
-  If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
-  card, say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called eepro100.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-Enable Power Management
-CONFIG_EEPRO100_PM
-  Many Intel EtherExpress PRO/100 PCI network cards are capable
-  of providing power management capabilities.  To make use of these
-  capabilities, say Y.
-
-  WARNING:  This option is intended for kernel developers and testers.
-  It is still very experimental, with some people reporting complete
-  lockups.
-
-  It is recommended to say N here.
-
-Myson MTD-8xx PCI Ethernet support
-CONFIG_FEALNX
-  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
-  cards. Specifications and data at
-  <http://www.myson.com.hk/mtd/datasheet/>.
-
-ICL EtherTeam 16i/32 support
-CONFIG_ETH16I
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called eth16i.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-TI ThunderLAN support
-CONFIG_TLAN
-  If you have a PCI Ethernet network card based on the ThunderLAN chip
-  which is supported by this driver, say Y and read the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Devices currently supported by this driver are Compaq Netelligent,
-  Compaq NetFlex and Olicom cards.  Please read the file
-  <file:Documentation/networking/tlan.txt> for more details.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tlan.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-  Please email feedback to  torben.mathiasen@compaq.com.
-
-VIA Rhine support
-CONFIG_VIA_RHINE
-  If you have a VIA "rhine" based network card (Rhine-I (3043) or
-  Rhine-2 (VT86c100A)), say Y here.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called via-rhine.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt> as
-  well as <file:Documentation/networking/net-modules.txt>.
-
-Davicom DM910x/DM980x support
-CONFIG_DM9102
-  This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
-  Davicom (<http://www.davicom.com.tw/>).  If you have such a network
-  (Ethernet) card, say Y.  Some information is contained in the file
-  <file:Documentation/networking/dmfe.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dmfe.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-Racal-Interlan EISA ES3210 support
-CONFIG_ES3210
-  If you have a network (Ethernet) card of this type, say Y and read
-  the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called es3210.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/networking/net-modules.txt>.
-
-SMC EtherPower II
-CONFIG_EPIC100
-  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
-  which is based on the SMC83c17x (EPIC/100).
-  More specific information and updates are available from
-  <http://www.scyld.com/network/epic100.html>.
-
-DEC LANCE Ethernet controller support
-CONFIG_DECLANCE
-  This driver is for the series of Ethernet controllers produced by
-  DEC (now Compaq) based on the AMD Lance chipset, including the
-  DEPCA series.  (This chipset is better known via the NE2100 cards.)
-
-SGI Seeq Ethernet controller support
-CONFIG_SGISEEQ
-  Say Y here if you have an Seeq based Ethernet network card. This is
-  used in many Silicon Graphics machines.
-
-Sundance Alta PCI Ethernet support
-CONFIG_SUNDANCE
-  This driver is for the Sundance "Alta" chip.
-  More specific information and updates are available from
-  <http://www.scyld.com/network/sundance.html>.
-
-Sun3/Sun3x on-board LANCE support
-CONFIG_SUN3LANCE
-  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
-  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
-  here to compile in the Linux driver for this and enable Ethernet.
-  General Linux information on the Sun 3 and 3x series (now
-  discontinued) is at
-  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-  If you're not building a kernel for a Sun 3, say N.
-
-Sun3 on-board Intel 82586 support
-CONFIG_SUN3_82586
-  This driver enables support for the on-board Intel 82586 based
-  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
-  that this driver does not support 82586-based adapters on additional
-  VME boards.
-
-Winbond W89c840 PCI Ethernet support
-CONFIG_WINBOND_840
-  This driver is for the Winbond W89c840 chip.  It also works with
-  the TX9882 chip on the Compex RL100-ATX board.
-  More specific information and updates are available from
-  <http://www.scyld.com/network/drivers.html>.
-
-Zenith Z-Note support
-CONFIG_ZNET
-  The Zenith Z-Note notebook computer has a built-in network
-  (Ethernet) card, and this is the Linux driver for it. Note that the
-  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
-  by this driver. Read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Philips SAA9730 Ethernet support
-CONFIG_LAN_SAA9730
-  The SAA9730 is a combined multimedia and peripheral controller used
-  in thin clients, Internet access terminals, and diskless
-  workstations.
-  See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
-
-Pocket and portable adapters
-CONFIG_NET_POCKET
-  Cute little network (Ethernet) devices which attach to the parallel
-  port ("pocket adapters"), commonly used with laptops. If you have
-  one of those, say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to plug a network (or some other) card into the PCMCIA
-  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
-  credit card size extension cards used by all modern laptops), you
-  need the pcmcia-cs package (location contained in the file
-  <file:Documentation/Changes>) and you can say N here.
-
-  Laptop users should read the Linux Laptop home page at
-  <http://www.cs.utexas.edu/users/kharker/linux-laptop/>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about this class of network devices. If you say Y, you
-  will be asked for your specific device in the following questions.
-
-AT-LAN-TEC/RealTek pocket adapter support
-CONFIG_ATP
-  This is a network (Ethernet) device which attaches to your parallel
-  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>, if you
-  want to use this.  If you intend to use this driver, you should have
-  said N to the "Parallel printer support", because the two drivers
-  don't like each other.
-
-  If you want to compile this driver as a module however ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.  The module will be called atp.o.
-
-D-Link DE600 pocket adapter support
-CONFIG_DE600
-  This is a network (Ethernet) device which attaches to your parallel
-  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, if you want to use
-  this. It is possible to have several devices share a single parallel
-  port and it is safe to compile the corresponding drivers into the
-  kernel.
-
-  If you want to compile this driver as a module however ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called de600.o.
-
-D-Link DE620 pocket adapter support
-CONFIG_DE620
-  This is a network (Ethernet) device which attaches to your parallel
-  port. Read <file:Documentation/networking/DLINK.txt> as well as the
-  Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, if you want to use
-  this. It is possible to have several devices share a single parallel
-  port and it is safe to compile the corresponding drivers into the
-  kernel.
-
-  If you want to compile this driver as a module however ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called de620.o.
-
-Token Ring driver support
-CONFIG_TR
-  Token Ring is IBM's way of communication on a local network; the
-  rest of the world uses Ethernet. To participate on a Token Ring
-  network, you need a special Token ring network card. If you are
-  connected to such a Token Ring network and want to use your Token
-  Ring card under Linux, say Y here and to the driver for your
-  particular card below and read the Token-Ring mini-HOWTO, available
-  from <http://www.linuxdoc.org/docs.html#howto>. Most people can
-  say N here.
-
-IBM Tropic chipset based adapter support
-CONFIG_IBMTR
-  This is support for all IBM Token Ring cards that don't use DMA. If
-  you have such a beast, say Y and read the Token-Ring mini-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  Warning: this driver will almost definitely fail if more than one
-  active Token Ring card is present.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ibmtr.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-IBM Olympic chipset PCI adapter support
-CONFIG_IBMOL
-  This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
-  Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
-  Wake On Lan, and PCI 100/16/4 adapters.
-
-  If you have such an adapter, say Y and read the Token-Ring
-  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called olympic.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  Also read <file:Documentation/networking/olympic.txt> or check the
-  Linux Token Ring Project site for the latest information at
-  <http://www.linuxtr.net/>.
-
-IBM Lanstreamer chipset PCI adapter support
-CONFIG_IBMLS
-  This is support for IBM Lanstreamer PCI Token Ring Cards.
-
-  If you have such an adapter, say Y and read the Token-Ring
-  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a modules ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The modules will be called lanstreamer.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Generic TMS380 Token Ring ISA/PCI/MCA/EISA adapter support
-CONFIG_TMS380TR
-  This driver provides generic support for token ring adapters
-  based on the Texas Instruments TMS380 series chipsets.  This
-  includes the SysKonnect TR4/16(+) ISA (SK-4190), SysKonnect
-  TR4/16(+) PCI (SK-4590), SysKonnect TR4/16 PCI (SK-4591),
-  Compaq 4/16 PCI, Thomas-Conrad TC4048 4/16 PCI, and several
-  Madge adapters.  If you say Y here, you will be asked to select
-  which cards to support below.  If you're using modules, each
-  class of card will be supported by a separate module.
-
-  If you have such an adapter and would like to use it, say Y and
-  read the Token-Ring mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Also read the file <file:Documentation/networking/tms380tr.txt> or
-  check <http://www.auk.cx/tms380tr/>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tms380tr.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Generic TMS380 PCI support
-CONFIG_TMSPCI
-  This tms380 module supports generic TMS380-based PCI cards.
-
-  These cards are known to work:
-     - Compaq 4/16 TR PCI
-     - SysKonnect TR4/16 PCI (SK-4590/SK-4591)
-     - Thomas-Conrad TC4048 PCI 4/16
-     - 3Com Token Link Velocity
-
-  This driver is available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tmspci.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Generic TMS380 ISA support
-CONFIG_TMSISA
-  This tms380 module supports generic TMS380-based ISA cards.
-
-  These cards are known to work:
-     - SysKonnect TR4/16 ISA (SK-4190)
-
-  This driver is available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tmsisa.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Madge Smart 16/4 PCI Mk2 support
-CONFIG_ABYSS
-  This tms380 module supports the Madge Smart 16/4 PCI Mk2
-  cards (51-02).
-
-  This driver is available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called abyss.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Madge Smart 16/4 Ringnode MicroChannel
-CONFIG_MADGEMC
-  This tms380 module supports the Madge Smart 16/4 MC16 and MC32
-  MicroChannel adapters.
-
-  This driver is available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called madgemc.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-SMC ISA/MCA Token Ring adapter support
-CONFIG_SMCTR
-  This is support for the ISA and MCA SMC Token Ring cards,
-  specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A
-  (8115T/A) adapters.
-
-  If you have such an adapter and would like to use it, say Y or M and
-  read the Token-Ring mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto> and the file
-  <file:Documentation/networking/smctr.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called smctr.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Sun Happy Meal 10/100baseT support
-CONFIG_HAPPYMEAL
-  This driver supports the "hme" interface present on most Ultra
-  systems and as an option on older Sbus systems. This driver supports
-  both PCI and Sbus devices. This driver also supports the "qfe" quad
-  100baseT device available in both PCI and Sbus configurations.
-
-  This support is also available as a module called sunhme.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun Lance support
-CONFIG_SUNLANCE
-  This driver supports the "le" interface present on all 32-bit Sparc
-  systems, on some older Ultra systems and as an Sbus option.  These
-  cards are based on the AMD Lance chipset, which is better known
-  via the NE2100 cards.
-
-  This support is also available as a module called sunlance.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun BigMAC 10/100baseT support
-CONFIG_SUNBMAC
-  This driver supports the "be" interface available as an Sbus option.
-  This is Sun's older 100baseT Ethernet device.
-
-  This support is also available as a module called sunbmac.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun QuadEthernet support
-CONFIG_SUNQE
-  This driver supports the "qe" 10baseT Ethernet device, available as
-  an Sbus option. Note that this is not the same as Quad FastEthernet
-  "qfe" which is supported by the Happy Meal driver instead.
-
-  This support is also available as a module called sunqe.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Traffic Shaper
-CONFIG_SHAPER
-  The traffic shaper is a virtual network device that allows you to
-  limit the rate of outgoing data flow over some other network device.
-  The traffic that you want to slow down can then be routed through
-  these virtual devices. See
-  <file:Documentation/networking/shaper.txt> for more information.
-
-  An alternative to this traffic shaper is the experimental
-  Class-Based Queueing (CBQ) scheduling support which you get if you
-  say Y to "QoS and/or fair queueing" above.
-
-  To set up and configure shaper devices, you need the shapecfg
-  program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
-  shaper package.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called shaper.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-FDDI driver support
-CONFIG_FDDI
-  Fiber Distributed Data Interface is a high speed local area network
-  design; essentially a replacement for high speed Ethernet. FDDI can
-  run over copper or fiber. If you are connected to such a network and
-  want a driver for the FDDI card in your computer, say Y here (and
-  then also Y to the driver for your FDDI card, below). Most people
-  will say N.
-
-Digital DEFEA and DEFPA adapter support
-CONFIG_DEFXX
-  This is support for the DIGITAL series of EISA (DEFEA) and PCI
-  (DEFPA) controllers which can connect you to a local FDDI network.
-
-SysKonnect FDDI PCI support
-CONFIG_SKFP
-  Say Y here if you have a SysKonnect FDDI PCI adapter.
-  The following adapters are supported by this driver:
-  - SK-5521 (SK-NET FDDI-UP)
-  - SK-5522 (SK-NET FDDI-UP DAS)
-  - SK-5541 (SK-NET FDDI-FP)
-  - SK-5543 (SK-NET FDDI-LP)
-  - SK-5544 (SK-NET FDDI-LP DAS)
-  - SK-5821 (SK-NET FDDI-UP64)
-  - SK-5822 (SK-NET FDDI-UP64 DAS)
-  - SK-5841 (SK-NET FDDI-FP64)
-  - SK-5843 (SK-NET FDDI-LP64)
-  - SK-5844 (SK-NET FDDI-LP64 DAS)
-  - Netelligent 100 FDDI DAS Fibre SC
-  - Netelligent 100 FDDI SAS Fibre SC
-  - Netelligent 100 FDDI DAS UTP
-  - Netelligent 100 FDDI SAS UTP
-  - Netelligent 100 FDDI SAS Fibre MIC
-
-  Read <file:Documentation/networking/skfp.txt> for information about
-  the driver.
-
-  Questions concerning this driver can be addressed to:
-    linux@syskonnect.de
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  This is
-  recommended.  The module will be called skfp.o.
-
-HIgh Performance Parallel Interface (HIPPI) support
-CONFIG_HIPPI
-  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
-  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
-  can run over copper (25m) or fiber (300m on multi-mode or 10km on
-  single-mode). HIPPI networks are commonly used for clusters and to
-  connect to super computers. If you are connected to a HIPPI network
-  and have a HIPPI network card in your computer that you want to use
-  under Linux, say Y here (you must also remember to enable the driver
-  for your HIPPI card below). Most people will say N here.
-
-Essential RoadRunner HIPPI PCI adapter support
-CONFIG_ROADRUNNER
-  Say Y here if this is your PCI HIPPI network card.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called rrunner.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N.
-
-Use large TX/RX rings
-CONFIG_ROADRUNNER_LARGE_RINGS
-  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
-  of additional memory to allow for fastest operation, both for
-  transmitting and receiving. This memory cannot be used by any other
-  kernel code or by user space programs. Say Y here only if you have
-  the memory.
-
-Acorn Ether1 support
-CONFIG_ARM_ETHER1
-  If you have an Acorn system with one of these (AKA25) network cards,
-  you should say Y to this option if you wish to use it with Linux.
-
-Acorn/ANT Ether3 support
-CONFIG_ARM_ETHER3
-  If you have an Acorn system with one of these network cards, you
-  should say Y to this option if you wish to use it with Linux.
-
-I-Cubed EtherH support
-CONFIG_ARM_ETHERH
-  If you have an Acorn system with one of these network cards, you
-  should say Y to this option if you wish to use it with Linux.
-
-EBSA-110 Ethernet interface (AM79C961A)
-CONFIG_ARM_AM79C961A
-  If you wish to compile a kernel for the EBSA-110, then you should
-  always answer Y to this.
-
-Support Thumb instructions
-CONFIG_ARM_THUMB
-  Say Y if you want to have kernel support for ARM Thumb instructions,
-  fault handlers, and system calls.
-
-  The Thumb instruction set is a compressed form of the standard ARM
-  instruction set resulting in smaller binaries at the expense of
-  slightly less efficient code.
-
-  If you don't know what this all is, saying Y is a safe choice.
-
-Support CD-ROM drives that are not SCSI or IDE/ATAPI
-CONFIG_CD_NO_IDESCSI
-  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
-  here, otherwise N. Read the CD-ROM-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that the answer to this question doesn't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about these CD-ROM drives. If you are unsure what you
-  have, say Y and find out whether you have one of the following
-  drives.
-
-  For each of these drivers, a file Documentation/cdrom/{driver_name}
-  exists. Especially in cases where you do not know exactly which kind
-  of drive you have you should read there. Most of these drivers use a
-  file drivers/cdrom/{driver_name}.h where you can define your
-  interface parameters and switch some internal goodies.
-
-  All these CD-ROM drivers are also usable as a module ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want). If you want to compile them as module, say M instead of Y and
-  read <file:Documentation/modules.txt>.
-
-  If you want to use any of these CD-ROM drivers, you also have to
-  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
-  answer will get "defaulted" for you if you enable any of the Linux
-  CD-ROM drivers).
-
-Sony CDU31A/CDU33A CD-ROM support
-CONFIG_CDU31A
-  These CD-ROM drives have a spring-pop-out caddyless drawer, and a
-  rectangular green LED centered beneath it.  NOTE: these CD-ROM
-  drives will not be auto detected by the kernel at boot time; you
-  have to provide the interface address as an option to the kernel at
-  boot time as described in <file:Documentation/cdrom/cdu31a> or fill
-  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
-  bootparam" or see the documentation of your boot loader (lilo or
-  loadlin) about how to pass options to the kernel.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cdu31a.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Standard Mitsumi [no XA/Multisession] CD-ROM support
-CONFIG_MCD
-  This is the older of the two drivers for the older Mitsumi models
-  LU-005, FX-001 and FX-001D. This is not the right driver for the
-  FX-001DE and the triple or quad speed models (all these are
-  IDE/ATAPI models). Please also the file
-  <file:Documentation/cdrom/mcd>.
-
-  With the old LU-005 model, the whole drive chassis slides out for cd
-  insertion. The FX-xxx models use a motorized tray type mechanism.
-  Note that this driver does not support XA or MultiSession CDs
-  (PhotoCDs). There is a new driver (next question) which can do
-  this. If you want that one, say N here.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mcd.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-IRQ channel for Mitsumi CD-ROM
-CONFIG_MCD_IRQ
-  This allows you to specify the default value of the IRQ used by the
-  driver. This setting can be overridden by passing the "mcd="
-  parameter to the kernel at boot time (or at module load time if you
-  said M to "Standard Mitsumi CD-ROM support").
-
-I/O base address for Mitsumi CD-ROM
-CONFIG_MCD_BASE
-  This allows you to specify the default value of the I/O base address
-  used by the driver. This setting can be overridden by passing the
-  "mcd=" parameter to the kernel at boot time (or at module load time
-  if you said M to "Standard Mitsumi CD-ROM support").
-
-Mitsumi [XA/MultiSession] CD-ROM support
-CONFIG_MCDX
-  Use this driver if you want to be able to read XA or MultiSession
-  CDs (PhotoCDs) as well as ordinary CDs with your Mitsumi LU-005,
-  FX-001 or FX-001D CD-ROM drive. In addition, this driver uses much
-  less kernel memory than the old one, if that is a concern. This
-  driver is able to support more than one drive, but each drive needs
-  a separate interface card. Please read the file
-  <file:Documentation/cdrom/mcdx>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mcdx.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Matsushita/Panasonic/Creative, Longshine, TEAC CD-ROM support
-CONFIG_SBPCD
-  This driver supports most of the drives which use the Panasonic or
-  Sound Blaster interface.  Please read the file
-  <file:Documentation/cdrom/sbpcd>.
-
-  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
-  (sometimes labeled "Creative"), the Creative Labs CD200, the
-  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
-  model), the TEAC CD-55A fall under this category.  Some other
-  "electrically compatible" drives (Vertos, Genoa, some Funai models)
-  are currently not supported; for the Sanyo H94A drive currently a
-  separate driver (asked later) is responsible.  Most drives have a
-  uniquely shaped faceplate, with a caddyless motorized drawer, but
-  without external brand markings.  The older CR-52x drives have a
-  caddy and manual loading/eject, but still no external markings.  The
-  driver is able to do an extended auto-probing for interface
-  addresses and drive types; this can help to find facts in cases you
-  are not sure, but can consume some time during the boot process if
-  none of the supported drives gets found.  Once your drive got found,
-  you should enter the reported parameters into
-  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
-  This driver can support up to four CD-ROM controller cards, and each
-  card can support up to four CD-ROM drives; if you say Y here, you
-  will be asked how many controller cards you have.  If compiled as a
-  module, only one controller card (but with up to four drives) is
-  usable.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sbpcd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Matsushita/Panasonic, ... second CD-ROM controller support
-CONFIG_SBPCD2
-  Say Y here only if you have two CD-ROM controller cards of this type
-  (usually only if you have more than four drives).  You should enter
-  the parameters for the second, third and fourth interface card into
-  <file:drivers/cdrom/sbpcd.h> before compiling the new kernel.  Read
-  the file <file:Documentation/cdrom/sbpcd>.
-
-Matsushita/Panasonic, ... third CD-ROM controller support
-CONFIG_SBPCD3
-  Say Y here only if you have three CD-ROM controller cards of this
-  type (usually only if you have more than six drives).  You should
-  enter the parameters for the second, third and fourth interface card
-  into <file:include/linux/sbpcd.h> before compiling the new kernel.
-  Read the file <file:Documentation/cdrom/sbpcd>.
-
-Matsushita/Panasonic, ... fourth CD-ROM controller support
-CONFIG_SBPCD4
-  Say Y here only if you have four CD-ROM controller cards of this
-  type (usually only if you have more than eight drives).  You should
-  enter the parameters for the second, third and fourth interface card
-  into <file:include/linux/sbpcd.h> before compiling the new kernel.
-  Read the file <file:Documentation/cdrom/sbpcd>.
-
-Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CD-ROM support
-CONFIG_AZTCD
-  This is your driver if you have an Aztech CDA268-01A, Orchid
-  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
-  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
-  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
-  as Aztech CDA269-031SE. Please read the file
-  <file:Documentation/cdrom/aztcd>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aztcd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Sony CDU535 CD-ROM support
-CONFIG_CDU535
-  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
-  drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sonycd535.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Goldstar R420 CD-ROM support
-CONFIG_GSCD
-  If this is your CD-ROM drive, say Y here.  As described in the file
-  <file:Documentation/cdrom/gscd>, you might have to change a setting
-  in the file <file:drivers/cdrom/gscd.h> before compiling the
-  kernel.  Please read the file <file:Documentation/cdrom/gscd>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called gscd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Philips/LMS CM206 CD-ROM support
-CONFIG_CM206
-  If you have a Philips/LMS CD-ROM drive cm206 in combination with a
-  cm260 host adapter card, say Y here. Please also read the file
-  <file:Documentation/cdrom/cm206>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cm206.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Optics Storage DOLPHIN 8000AT CD-ROM support
-CONFIG_OPTCD
-  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
-  compatible interface. It also works with the Lasermate CR328A. If
-  you have one of those, say Y. This driver does not work for the
-  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
-  one. Please read the file <file:Documentation/cdrom/optcd>.
-
-  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-  file system support" below, because that's the file system used on
-  CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called optcd.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Sanyo CDR-H94A CD-ROM support
-CONFIG_SJCD
-  If this is your CD-ROM drive, say Y here and read the file
-  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
-  "ISO 9660 CD-ROM file system support" below, because that's the
-  file system used on CD-ROMs.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sjcd.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-ISP16/MAD16/Mozart soft configurable cdrom interface support
-CONFIG_ISP16_CDI
-  These are sound cards with built-in cdrom interfaces using the OPTi
-  82C928 or 82C929 chips. Say Y here to have them detected and
-  possibly configured at boot time. In addition, You'll have to say Y
-  to a driver for the particular cdrom drive you have attached to the
-  card. Read <file:Documentation/cdrom/isp16> for details.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called isp16.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-iSeries Virtual I/O CD Support
-CONFIG_VIOCD
-  If you are running Linux on an IBM iSeries system and you want to
-  read a CD drive owned by OS/400, say Y here.
-
-Quota support
-CONFIG_QUOTA
-  If you say Y here, you will be able to set per user limits for disk
-  usage (also called disk quotas). Currently, it works only for the
-  ext2 file system. You need additional software in order to use quota
-  support; for details, read the Quota mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. Probably the quota
-  support is only useful for multi user systems. If unsure, say N.
-
-Memory Technology Device (MTD) support
-CONFIG_MTD
-  Memory Technology Devices are flash, RAM and similar chips, often
-  used for solid state file systems on embedded devices. This option
-  will provide the generic support for MTD drivers to register
-  themselves with the kernel and for potential users of MTD devices
-  to enumerate the devices which are present and obtain a handle on
-  them. It will also allow you to select individual drivers for 
-  particular hardware and users of MTD devices. If unsure, say N.
-
-MTD debugging support
-CONFIG_MTD_DEBUG
-  This turns on low-level debugging for the entire MTD sub-system.
-  Normally, you should say 'N'.
-
-MTD partitioning support
-CONFIG_MTD_PARTITIONS
-  If you have a device which needs to divide its flash chip(s) up
-  into multiple 'partitions', each of which appears to the user as
-  a separate MTD device, you require this option to be enabled. If
-  unsure, say 'Y'.
-
-  Note, however, that you don't need this option for the DiskOnChip
-  devices. Partitioning on NFTL 'devices' is a different - that's the
-  'normal' form of partitioning used on a block device.
-
-RedBoot partition table parsing
-CONFIG_MTD_REDBOOT_PARTS
-  RedBoot is a ROM monitor and bootloader which deals with multiple
-  'images' in flash devices by putting a table in the last erase block
-  of the device, similar to a partition table, which gives the
-  offsets, lengths and names of all the images stored in the flash.
-
-  If you need code which can detect and parse this table, and register
-  MTD 'partitions' corresponding to each image in the table, enable
-  this option.
-
-  You will still need the parsing functions to be called by the driver
-  for your particular device. It won't happen automatically. The
-  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
-  example.
-
-Compaq bootldr partition table parsing
-CONFIG_MTD_BOOTLDR_PARTS
-  The Compaq bootldr deals with multiple 'images' in flash devices
-  by putting a table in one of the first erase blocks of the device,
-  similar to a partition table, which gives the offsets, lengths and
-  names of all the images stored in the flash.
-
-  If you need code which can detect and parse this table, and register
-  MTD 'partitions' corresponding to each image in the table, enable
-  this option.
-
-  You will still need the parsing functions to be called by the driver
-  for your particular device. It won't happen automatically. The 
-  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 
-  example.
-
-ARM Firmware Suite flash layout / partition parsing
-CONFIG_MTD_AFS_PARTS
-  The ARM Firmware Suite allows the user to divide flash devices into
-  multiple 'images'. Each such image has a header containing its name
-  and offset/size etc.
-
-  If you need code which can detect and parse these tables, and
-  register MTD 'partitions' corresponding to each image detected,
-  enable this option.
-
-  You will still need the parsing functions to be called by the driver
-  for your particular device.  It won't happen automatically.  The 
-  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
-
-MTD debugging verbosity (0 = quiet, 3 = noisy)
-CONFIG_MTD_DEBUG_VERBOSE
-  Determines the verbosity level of the MTD debugging messages.
-
-Direct chardevice access to MTD devices
-CONFIG_MTD_CHAR
-  This provides a character device for each MTD device present in
-  the system, allowing the user to read and write directly to the
-  memory chips, and also use ioctl() to obtain information about
-  the device, or to erase parts of it.
-
-Caching block device access to MTD devices
-CONFIG_MTD_BLOCK
-  Although most flash chips have an erase size too large to be useful
-  as block devices, it is possible to use MTD devices which are based
-  on RAM chips in this manner. This block device is a user of MTD
-  devices performing that function.
-
-  At the moment, it is also required for the Journalling Flash File
-  System(s) to obtain a handle on the MTD device when it's mounted
-  (although JFFS and JFFS2 don't actually use any of the functionality
-  of the mtdblock device).
-
-  Later, it may be extended to perform read/erase/modify/write cycles
-  on flash chips to emulate a smaller block size. Needless to say,
-  this is very unsafe, but could be useful for file systems which are
-  almost never written to.
-
-  You do not need this option for use with the DiskOnChip devices. For
-  those, enable NFTL support (CONFIG_NFTL) instead.
-
-Readonly block device access to MTD devices
-CONFIG_MTD_BLOCK_RO
-  This allows you to mount read-only file systems (such as cramfs)
-  from an MTD device, without the overhead (and danger) of the caching
-  driver.
-
-  You do not need this option for use with the DiskOnChip devices. For
-  those, enable NFTL support (CONFIG_NFTL) instead.
-
-FTL (Flash Translation Layer) support
-CONFIG_FTL
-  This provides support for the original Flash Translation Layer which
-  is part of the PCMCIA specification. It uses a kind of pseudo-
-  file system on a flash device to emulate a block device with
-  512-byte sectors, on top of which you put a 'normal' file system.
-
-  You may find that the algorithms used in this code are patented
-  unless you live in the Free World where software patents aren't
-  legal - in the USA you are only permitted to use this on PCMCIA
-  hardware, although under the terms of the GPL you're obviously
-  permitted to copy, modify and distribute the code as you wish. Just
-  not use it.
-
-NFTL (NAND Flash Translation Layer) support
-CONFIG_NFTL
-  This provides support for the NAND Flash Translation Layer which is
-  used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
-  file system on a flash device to emulate a block device with
-  512-byte sectors, on top of which you put a 'normal' file system.
-
-  You may find that the algorithms used in this code are patented
-  unless you live in the Free World where software patents aren't
-  legal - in the USA you are only permitted to use this on DiskOnChip
-  hardware, although under the terms of the GPL you're obviously
-  permitted to copy, modify and distribute the code as you wish. Just
-  not use it.
-
-Write support for NFTL (EXPERIMENTAL)
-CONFIG_NFTL_RW
-  If you're lucky, this will actually work. Don't whinge if it
-  doesn't.  Send mail to the MTD mailing list
-  <linux-mtd@lists.infradead.org> if you want to help to make it more
-  reliable.
-
-Common Flash Interface (CFI) support
-CONFIG_MTD_CFI
-  The Common Flash Interface specification was developed by Intel,
-  AMD and other flash manufactures that provides a universal method
-  for probing the capabilities of flash devices. If you wish to
-  support any device that is CFI-compliant, you need to enable this
-  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
-  for more information on CFI.
-
-CFI Advanced configuration options
-CONFIG_MTD_CFI_ADV_OPTIONS
-  If you need to specify a specific endianness for access to flash
-  chips, or if you wish to reduce the size of the kernel by including
-  support for only specific arrangements of flash chips, say 'Y'. This
-  option does not directly affect the code, but will enable other 
-  configuration options which allow you to do so.
-
-  If unsure, say 'N'.
-
-Specific CFI Flash geometry selection
-CONFIG_MTD_CFI_GEOMETRY
-  This option does not affect the code directly, but will enable 
-  some other configuration options which would allow you to reduce
-  the size of the kernel by including support for only certain 
-  arrangements of CFI chips. If unsure, say 'N' and all options 
-  which are supported by the current code will be enabled.
-
-Support 8-bit buswidth
-CONFIG_MTD_CFI_B1
-  If you wish to support CFI devices on a physical bus which is
-  8 bits wide, say 'Y'.
-
-Support 16-bit buswidth
-CONFIG_MTD_CFI_B2
-  If you wish to support CFI devices on a physical bus which is
-  16 bits wide, say 'Y'.
-
-Support 32-bit buswidth
-CONFIG_MTD_CFI_B4
-  If you wish to support CFI devices on a physical bus which is
-  32 bits wide, say 'Y'.
-
-Support 1-chip flash interleave
-CONFIG_MTD_CFI_I1
-  If your flash chips are not interleaved - i.e. you only have one
-  flash chip addressed by each bus cycle, then say 'Y'.
-
-Support 2-chip flash interleave
-CONFIG_MTD_CFI_I2
-  If your flash chips are interleaved in pairs - i.e. you have two
-  flash chips addressed by each bus cycle, then say 'Y'.
-
-Support 4-chip flash interleave
-CONFIG_MTD_CFI_I4
-  If your flash chips are interleaved in fours - i.e. you have four
-  flash chips addressed by each bus cycle, then say 'Y'.
-
-# Choice: mtd_swap_data
-Flash cmd/query data swapping
-CONFIG_MTD_CFI_NOSWAP
-  This option defines the way in which the CPU attempts to arrange
-  data bits when writing the 'magic' commands to the chips. Saying
-  'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
-  enabled, means that the CPU will not do any swapping; the chips
-  are expected to be wired to the CPU in 'host-endian' form. 
-  Specific arrangements are possible with the BIG_ENDIAN_BYTE and
-  LITTLE_ENDIAN_BYTE, if the bytes are reversed.
-
-  If you have a LART, on which the data (and address) lines were
-  connected in a fashion which ensured that the nets were as short
-  as possible, resulting in a bit-shuffling which seems utterly
-  random to the untrained eye, you need the LART_ENDIAN_BYTE option.
-
-  Yes, there really exists something sicker than PDP-endian :)
-
-CFI support for Intel/Sharp Extended Command Set chips
-CONFIG_MTD_CFI_INTELEXT
-  The Common Flash Interface defines a number of different command
-  sets which a CFI-compliant chip may claim to implement. This code
-  provides support for one of those command sets, used on Intel
-  StrataFlash and other parts.
-
-CFI support for AMD/Fujitsu Standard Command Set chips
-CONFIG_MTD_CFI_AMDSTD
-  The Common Flash Interface defines a number of different command
-  sets which a CFI-compliant chip may claim to implement. This code
-  provides support for one of those command sets, used on chips 
-  chips including the AMD Am29LV320.
-
-CFI support for Intel/Sharp Standard Commands
-CONFIG_MTD_CFI_INTELSTD
-  The Common Flash Interface defines a number of different command
-  sets which a CFI-compliant chip may claim to implement. This code
-  provides support for one of those command sets.
-
-pre-CFI Sharp chip support
-CONFIG_MTD_SHARP
-  This option enables support for flash chips using Sharp-compatible
-  commands, including some which are not CFI-compatible and hence 
-  cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
-
-AMD compatible flash chip support (non-CFI)
-CONFIG_MTD_AMDSTD
-  This option enables support for flash chips using AMD-compatible
-  commands, including some which are not CFI-compatible and hence 
-  cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
-
-  It also works on AMD compatible chips that do conform to CFI.
-
-Support for RAM chips in bus mapping
-CONFIG_MTD_RAM
-  This option enables basic support for RAM chips accessed through 
-  a bus mapping driver.
-
-Support for ROM chips in bus mapping
-CONFIG_MTD_ROM
-  This option enables basic support for ROM chips accessed through 
-  a bus mapping driver.
-
-JEDEC device support
-CONFIG_MTD_JEDEC
-  Enable older older JEDEC flash interface devices for self
-  programming flash.  It is commonly used in older AMD chips.  It is
-  only called JEDEC because the JEDEC association
-  <http://www.jedec.org/> distributes the identification codes for the
-  chips. WARNING!!!! This code does not compile and is incomplete as
-  are the specific JEDEC devices drivers.
-
-CFI Flash device mapped on StrongARM SA11x0
-CONFIG_MTD_SA1100
-  This enables access to the flash chips on most platforms based on
-  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
-  If you have such a board, say 'Y'.
-
-Support for Compaq bootldr partition tables on SA11x0
-CONFIG_MTD_SA1100_REDBOOT_PARTITIONS
-  Enabling this option will cause the kernel to look for a RedBoot 
-  FIS (Flash Image System) table in the last erase block of the flash
-  chips detected. If you are using RedBoot on your SA11x0-based board
-  and want Linux to present 'partitions' matching the images which
-  RedBoot has listed, say 'Y'.
-
-Support for Compaq bootldr partition tables on SA11x0
-CONFIG_MTD_SA1100_BOOTLDR_PARTITIONS
-  Enabling this option will cause the kernel to look for a Compaq
-  bootldr partition table on the flash chips detected.  If you are
-  using the Compaq bootldr on your SA11x0-based board and want Linux 
-  to present 'partitions' matching the images which the bootldr has
-  listed, say 'Y'.
-
-Flash chip mapping in physical memory
-CONFIG_MTD_PHYSMAP
-  This provides a 'mapping' driver which allows the CFI probe and
-  command set driver code to communicate with flash chips which
-  are mapped physically into the CPU's memory. You will need to
-  configure the physical address and size of the flash chips on
-  your particular board as well as the bus width.
-
-Physical start location of flash chip mapping
-CONFIG_MTD_PHYSMAP_START
-  This is the physical memory location at which the flash chips
-  are mapped on your particular target board. Refer to the
-  memory map which should hopefully be in the documentation for
-  your board.
-
-Physical length of flash chip mapping
-CONFIG_MTD_PHYSMAP_LEN
-  This is the total length of the mapping of the flash chips on
-  your particular board. If there is space, or aliases, in the
-  physical memory map between the chips, this could be larger
-  than the total amount of flash present. Refer to the memory
-  map which should hopefully be in the documentation for your
-  board.
-
-Buswidth of flash in bytes
-CONFIG_MTD_PHYSMAP_BUSWIDTH
-  This is the total width of the data bus of the flash devices
-  in octets. For example, if you have a data bus width of 32
-  bits, you would set the bus width octect value to 4. This is
-  used internally by the CFI drivers.
-
-Flash chip mapping on Sun Microsystems boardsets
-CONFIG_MTD_SUN_UFLASH
-  This provides a 'mapping' driver which supports the way in 
-  which user-programmable flash chips are connected on various 
-  Sun Microsystems boardsets.  This driver will require CFI support 
-  in the kernel, so if you did not enable CFI previously, do that now.
-
-Flash chip mapping on Nora
-CONFIG_MTD_NORA
-  If you had to ask, you don't have one. Say 'N'.
-
-Flash chip mapping on Photron PNC-2000
-CONFIG_MTD_PNC2000
-  PNC-2000 is the name of Network Camera product from PHOTRON
-  Ltd. in Japan. It uses CFI-compliant flash.
-
-Flash chip mapping on RPXlite PPC board
-CONFIG_MTD_RPXLITE
-  The RPXLite PowerPC board has CFI-compliant chips mapped in
-  a strange sparse mapping. This 'mapping' driver supports that
-  arrangement, allowing the CFI probe and command set driver code
-  to communicate with the chips on the RPXLite board. More at
-  <http://www.embeddedplanet.com/rpx_lite_specification_sheet.htm>.
-
-Flash chip mapping on AMD SC520 CDP board
-CONFIG_MTD_SC520CDP
-  The SC520 CDP board has two banks of CFI-compliant chips and one
-  Dual-in-line JEDEC chip. This 'mapping' driver supports that
-  arrangement, implementing three MTD devices.
-
-Flash chip mapping on Arcom Control Systems SBC-MediaGX
-CONFIG_MTD_SBC_GXX
-  This provides a driver for the on-board flash of Arcom Control
-  Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
-  By default the flash is split into 3 partitions which are accessed
-  as separate MTD devices.  This board utilizes Intel StrataFlash.
-  More info at
-  <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
-
-CFI Flash device mapped on D-Box2
-CONFIG_MTD_DBOX2
-  This enables access routines for the flash chips on the Nokia/Sagem
-  D-Box 2 board. If you have one of these boards and would like to use
-  the flash chips on it, say 'Y'.
-
-CFI Flash device mapped on the XScale IQ80310 board
-CONFIG_MTD_IQ80310
-  This enables access routines for the flash chips on the Intel XScale
-  IQ80310 evaluation board. If you have one of these boards and would 
-  like to use the flash chips on it, say 'Y'.
-
-CFI Flash device mapped on AMD NetSc520
-CONFIG_MTD_NETSC520
-  This enables access routines for the flash chips on the AMD NetSc520
-  demonstration board. If you have one of these boards and would like 
-  to use the flash chips on it, say 'Y'.
-
-Flash chip mapping on Arcom Control Systems ELAN-104NC
-CONFIG_MTD_ELAN_104NC
-  This provides a driver for the on-board flash of the Arcom Control
-  System's ELAN-104NC development board. By default the flash
-  is split into 3 partitions which are accessed as separate MTD
-  devices. This board utilizes Intel StrataFlash. More info at
-  <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
-
-Flash chip mapping on Compaq iPAQ/Bitsy
-CONFIG_MTD_BITSY
-  This provides a driver for the on-board flash found in Compaq's
-  iPAQ Palm PC and their research prototype the Itsy. iPAQ info at
-  <http://www5.compaq.com/products/handhelds/pocketpc/> and the
-  Itsy <http://www.research.digital.com/wrl/projects/Itsy/index.html>.
- 
-Flash chip mapping on Compaq iPAQ/Bitsy
-CONFIG_MTD_DC21285
-  This provides a driver for the flash accessed using Intel's
-  21285 bridge used with Intel's StrongARM processors. More info at
-  <http://developer.intel.com/design/bridge/quicklist/dsc-21285.htm>.
-
-Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board
-CONFIG_MTD_CSTM_MIPS_IXX
-  This provides a mapping driver for the Integrated Tecnology Express,
-  Inc (ITE) QED-4N-S01B eval board and the Globespan IVR Reference
-  Board.  It provides the necessary addressing, length, buswidth, vpp
-  code and addition setup of the flash device for these boards.  In
-  addition, this mapping driver can be used for other boards via
-  setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/LEN/BUSWIDTH
-  parameters.  This mapping will provide one mtd device using one
-  partition.  The start address can be offset from the beginning of
-  flash and the len can be less than the total flash device size to
-  allow a window into the flash.  Both CFI and JEDEC probes are
-  called.
-
-Physical start location of flash mapping
-CONFIG_MTD_CSTM_MIPS_IXX_START
-  This is the physical memory location that the MTD driver will
-  use for the flash chips on your particular target board. 
-  Refer to the memory map which should hopefully be in the 
-  documentation for your board.
-
-Physical length of flash mapping
-CONFIG_MTD_CSTM_MIPS_IXX_LEN
-  This is the total length that the MTD driver will use for the 
-  flash chips on your particular board.  Refer to the memory
-  map which should hopefully be in the documentation for your
-  board.
-
-Physical bus width of flash mapping
-CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH
-  This is the total bus width of the mapping of the flash chips
-  on your particular board.
-
-Flash chip mapping on Mixcom piggyback card
-CONFIG_MTD_MIXMEM
-  This supports the paging arrangement for access to flash chips
-  on the MixCOM piggyback card, allowing the flash chip drivers
-  to get on with their job of driving the flash chips without
-  having to know about the paging. If you have one of these boards,
-  you probably want to enable this mapping driver. More info is at
-  <http://www.itc.hu/>.
-
-Flash chip mapping on Octagon 5066 SBC
-CONFIG_MTD_OCTAGON
-  This provides a 'mapping' driver which supports the way in which
-  the flash chips are connected in the Octagon-5066 Single Board
-  Computer. More information on the board is available at
-  <http://www.octagonsystems.com/Products/5066/5066.html>.
-
-Flash chip mapping on Tempustech VMAX SBC301
-CONFIG_MTD_VMAX
-  This provides a 'mapping' driver which supports the way in which
-  the flash chips are connected in the Tempustech VMAX SBC301 Single
-  Board Computer. More information on the board is available at
-  <http://www.tempustech.com/tt301.htm>.
-
-Support for NAND flash devices
-CONFIG_MTD_NAND
-  This enables support for accessing all type of NAND flash
-  devices.
-
-Support for software ECC algorithm
-CONFIG_MTD_NAND_ECC
-  This enables software-based ECC for use with NAND flash chips. It
-  can detect and correct 1 bit errors per 256 byte blocks. This
-  should be used to increase the reliability of the data stored and
-  read on the device.
-
-Support for verify read after write
-CONFIG_MTD_NAND_VERIFY_WRITE
-  This adds an extra check when data is written to the flash. The
-  NAND flash device internally checks only bits transitioning
-  from 1 to 0. There is a rare possibility that even though the
-  device thinks the write was successful, a bit could have been
-  flipped accidentaly due to device wear, gamma rays, whatever.
-  Enable this if you are really paranoid.
-
-Support for the SPIA board
-CONFIG_MTD_NAND_SPIA
-  If you had to ask, you don't have one. Say 'N'.
-
-M-Systems Disk-On-Chip 1000 support
-CONFIG_MTD_DOC1000
-  This provides an MTD device driver for the M-Systems DiskOnChip
-  1000 devices, which are obsolete so you probably want to say 'N'.
-
-M-Systems Disk-On-Chip 2000 and Millennium support
-CONFIG_MTD_DOC2000
-  This provides an MTD device driver for the M-Systems DiskOnChip
-  2000 and Millennium devices.  Originally designed for the DiskOnChip
-  2000, it also now includes support for the DiskOnChip Millennium.
-  If you have problems with this driver and the DiskOnChip Millennium,
-  you may wish to try the alternative Millennium driver below. To use
-  the alternative driver, you will need to undefine DOC_SINGLE_DRIVER
-  in the <file:drivers/mtd/devices/docprobe.c> source code.
-
-  If you use this device, you probably also want to enable the NFTL
-  'NAND Flash Translation Layer' option below, which is used to
-  emulate a block device by using a kind of file system on the flash
-  chips.
-
-Alternative Disk-On-Chip Millennium support
-CONFIG_MTD_DOC2001
-  This provides an alternative MTD device driver for the M-Systems 
-  DiskOnChip Millennium devices.  Use this if you have problems with
-  the combined DiskOnChip 2000 and Millennium driver above.  To get
-  the DiskOnChip probe code to load and use this driver instead of
-  the other one, you will need to undefine DOC_SINGLE_DRIVER near
-  the beginning of <file:drivers/mtd/devices/docprobe.c>.
-
-  If you use this device, you probably also want to enable the NFTL
-  'NAND Flash Translation Layer' option below, which is used to
-  emulate a block device by using a kind of file system on the flash
-  chips.
-
-Probe for DiskOnChip devices
-CONFIG_MTD_DOCPROBE
-  This isn't a real config option, it's derived.
-
-Advanced detection options for DiskOnChip
-CONFIG_MTD_DOCPROBE_ADVANCED
-  This option allows you to specify nonstandard address at which to
-  probe for a DiskOnChip, or to change the detection options.  You
-  are unlikely to need any of this unless you are using LinuxBIOS.
-  Say 'N'.
-
-Probe for 0x55 0xAA BIOS Extension Signature
-CONFIG_MTD_DOCPROBE_55AA
-  Check for the 0x55 0xAA signature of a DiskOnChip, and do not
-  continue with probing if it is absent.  The signature will always be
-  present for a DiskOnChip 2000 or a normal DiskOnChip Millennium.
-  Only if you have overwritten the first block of a DiskOnChip
-  Millennium will it be  absent.  Enable this option if you are using
-  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
-  you have managed to wipe the first block.
-
-Physical address of DiskOnChip
-CONFIG_MTD_DOCPROBE_ADDRESS
-  By default, the probe for DiskOnChip devices will look for a
-  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-  This option allows you to specify a single address at which to probe
-  for the device, which is useful if you have other devices in that
-  range which get upset when they are probed.
-
-  (Note that on PowerPC, the normal probe will only check at
-  0xE4000000.)
-
-  Normally, you should leave this set to zero, to allow the probe at
-  the normal addresses.
-
-Probe high addresses
-CONFIG_MTD_DOCPROBE_HIGH
-  By default, the probe for DiskOnChip devices will look for a
-  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-  This option changes to make it probe between 0xFFFC8000 and
-  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-  useful to you.  Say 'N'.
-
-Ramix PMC551 PCI Mezzanine ram card support
-CONFIG_MTD_PMC551
-  This provides a MTD device driver for the Ramix PMC551 RAM PCI card
-  from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
-  These devices come in memory configurations from 32M - 1G.  If you
-  have one, you probably want to enable this.
-
-  If this driver is compiled as a module you get the ability to select
-  the size of the aperture window pointing into the devices memory.
-  What this means is that if you have a 1G card, normally the kernel
-  will use a 1G memory map as its view of the device.  As a module,
-  you can select a 1M window into the memory and the driver will
-  "slide" the window around the PMC551's memory.  This was
-  particularly useful on the 2.2 kernels on PPC architectures as there
-  was limited kernel space to deal with.
-
-PMC551 256M DRAM Bugfix
-CONFIG_MTD_PMC551_BUGFIX
-  Some of Ramix's PMC551 boards with 256M configurations have invalid
-  column and row mux values.  This option will fix them, but will
-  break other memory configurations.  If unsure say N.
-
-PMC551 Debugging
-CONFIG_MTD_PMC551_DEBUG
-  This option makes the PMC551 more verbose during its operation and
-  is only really useful if you are developing on this driver or
-  suspect a possible hardware or driver bug.  If unsure say N.
-
-Use extra onboard system memory as MTD device
-CONFIG_MTD_SLRAM
-  If your CPU cannot cache all of the physical memory in your machine,
-  you can still use it for storage or swap by using this driver to
-  present it to the system as a Memory Technology Device.
-
-Debugging RAM test driver
-CONFIG_MTD_MTDRAM
-  This enables a test MTD device driver which uses vmalloc() to
-  provide storage.  You probably want to say 'N' unless you're
-  testing stuff.
-
-MTDRAM erase block size in KB
-CONFIG_MTDRAM_ERASE_SIZE
-  This allows you to configure the size of the erase blocks in the
-  device emulated by the MTDRAM driver.  If the MTDRAM driver is built
-  as a module, it is also possible to specify this as a parameter when
-  loading the module.
-
-MTDRAM device size in KB
-CONFIG_MTDRAM_TOTAL_SIZE
-  This allows you to configure the total size of the MTD device
-  emulated by the MTDRAM driver.  If the MTDRAM driver is built
-  as a module, it is also possible to specify this as a parameter when
-  loading the module.
-
-SRAM Hexadecimal Absolute position or 0
-CONFIG_MTDRAM_ABS_POS
-  If you have system RAM accessible by the CPU but not used by Linux
-  in normal operation, you can give the physical address at which the
-  available RAM starts, and the MTDRAM driver will use it instead of
-  allocating space from Linux's available memory. Otherwise, leave 
-  this set to zero. Most people will want to leave this as zero.
-
-Flash chip mapping on the Flaga Digital Module
-CONFIG_MTD_CFI_FLAGADM
-  Mapping for the Flaga digital module.  If you don´t have one, ignore
-  this setting.
-
-Momenco Ocelot boot flash device
-CONFIG_MTD_OCELOT
-  This enables access routines for the boot flash device and for the
-  NVRAM on the Momenco Ocelot board.  If you have one of these boards
-  and would like access to either of these, say 'Y'.
-
-Support for absent chips in bus mapping
-CONFIG_MTD_ABSENT
-  This option enables support for a dummy probing driver used to
-  allocated placeholder MTD devices on systems that have socketed
-  or removable media.  Use of this driver as a fallback chip probe
-  preserves the expected registration order of MTD device nodes on
-  the system regardless of media presence.  Device nodes created
-  with this driver will return -ENODEV upon access.
-
-MTD Emulation using block device
-CONFIG_MTD_BLKMTD
-  This driver allows a block device to appear as an MTD. It would
-  generally be used in the following cases:
-
-    Using Compact Flash as an MTD, these usually present themselves to
-    the system as an ATA drive.
-    Testing MTD users (eg JFFS2) on large media and media that might
-    be removed during a write (using the floppy drive).
-
-Cirrus CDB89712 evaluation board mappings
-CONFIG_MTD_CDB89712
-  This enables access to the flash or ROM chips on the CDB89712 board.
-  If you have such a board, say 'Y'.
-
-Detect non-CFI AMD/JEDEC-compatible flash chips
-CONFIG_MTD_JEDECPROBE
-  This option enables JEDEC-style probing of flash chips which are not
-  compatible with the Common Flash Interface, but will use the common
-  CFI-targetted flash drivers for any chips which are identified which
-  are in fact compatible in all but the probe method. This actually
-  covers most AMD/Fujitsu-compatible chips, and will shortly cover also
-  non-CFI Intel chips (that code is in MTD CVS and should shortly be sent
-  for inclusion in Linus' tree)
-
-BIOS flash chip on Intel L440GX boards
-CONFIG_MTD_L440GX
-  Support for treating the BIOS flash chip on Intel L440GX motherboards
-  as an MTD device - with this you can reprogram your BIOS.
-
-  BE VERY CAREFUL.
-
-28F160xx flash driver for LART
-CONFIG_MTD_LART
-  This enables the flash driver for LART. Please note that you do
-  not need any mapping/chip driver for LART. This one does it all
-  for you, so go disable all of those if you enabled some of them (:
-
-Older (theoretically obsoleted now) drivers for non-CFI chips
-CONFIG_MTD_OBSOLETE_CHIPS
-  This option does not enable any code directly, but will allow you to
-  select some other chip drivers which are now considered obsolete,
-  because the generic CONFIG_JEDEC_PROBE code above should now detect
-  the chips which are supported by these drivers, and allow the generic
-  CFI-compatible drivers to drive the chips. Say 'N' here unless you have
-  already tried the CONFIG_JEDEC_PROBE method and reported its failure
-  to the MTD mailing list at <linux-mtd@lists.infradead.org>
-
-CFI Flash device mapped on Hitachi SolutionEngine
-CONFIG_MTD_SOLUTIONENGINE
-  This enables access to the flash chips on the Hitachi SolutionEngine and
-  similar boards. Say 'Y' if you are building a kernel for such a board.
-
-Flash chip mapping on TQM8xxL PPC board
-CONFIG_MTD_TQM8XXL
-  The TQM8xxL PowerPC board has up to two banks of CFI-compliant
-  chips, currently uses AMD one. This 'mapping' driver supports
-  that arrangement, allowing the CFI probe and command set driver
-  code to communicate with the chips on the TQM8xxL board. More at
-  <http://www.denx.de/embedded-ppc-en.html>.
-
-Darkness
-CONFIG_MEMORY_SET
-  This is an option about which you will never be asked a question.
-  Therefore, I conclude that you do not exist - go away.
-
-  There is a grue here.
-
-Physical memory size
-CONFIG_MEMORY_SIZE
-  This sets the default memory size assumed by your SH kernel. It can
-  be overridden as normal by the 'mem=' argument on the kernel command
-  line. If unsure, consult your board specifications or just leave it
-  as 0x00400000 which was the default value before this became
-  configurable.
-
-Cache and PCI noncoherent
-CONFIG_SH_PCIDMA_NONCOHERENT
-  Enable this option if your platform does not have a CPU cache which
-  remains coherent with PCI DMA. It is safest to say 'Y', although you
-  will see better performance if you can say 'N', because the PCI DMA
-  code will not have to flush the CPU's caches. If you have a PCI host
-  bridge integrated with your SH CPU, refer carefully to the chip specs
-  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
-
-USB (Universal Serial Bus) support
-CONFIG_USB
-  Universal Serial Bus (USB) is a specification for a serial bus
-  subsystem which offers higher speeds and more features than the
-  traditional PC serial port.  The bus supplies power to peripherals
-  and allows for hot swapping.  Up to 127 USB peripherals can be
-  connected to a single USB port in a tree structure.  The USB port is
-  the root of the tree, the peripherals are the leaves and the inner
-  nodes are special USB devices called hubs.  Many newer PC's have USB
-  ports and newer peripherals such as scanners, keyboards, mice,
-  modems, and printers support the USB protocol and can be connected
-  to the PC via those ports.
-
-  Say Y here if your computer has a USB port and you want to use USB
-  devices.  You then need to say Y to at least one of "UHCI support"
-  or "OHCI support" below (the type of interface that the USB hardware
-  in your computer provides to the operating system) and then choose
-  from among the drivers for USB peripherals.  You may want to check
-  out the information provided in <file:Documentation/usb/> and
-  especially the links given in <file:Documentation/usb/usb-help.txt>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usbcore.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB verbose debug messages
-CONFIG_USB_DEBUG
-  Say Y here if you want the USB core & hub drivers to produce a bunch
-  of debug messages to the system log. Select this if you are having a
-  problem with USB support and want to see more of what is going on.
-
-USB fetch large config
-CONFIG_USB_LARGE_CONFIG
-  This option changes the initial request for a config descriptor so
-  that some poorly designed devices will still work.  Some APC UPSes
-  need it.  Basically, the usb subsystem sends a request for a short
-  (8 byte) config, just to find out how large the real config is.
-  Incorrectly implemented devices may choke on this small config
-  request.  This option make the initial request for a quite large
-  config (1009 bytes), and things just work.
-
-  If you have an APC UPS, say Y; otherwise say N.
-
-USB long timeout
-CONFIG_USB_LONG_TIMEOUT
-  This option makes the standard time out a bit longer.  Basically,
-  some devices are just slow to respond, so this makes usb more
-  patient.  There should be no harm in selecting this, but it is
-  needed for some MGE Ellipse UPSes.
-
-  If you have an MGE Ellipse UPS, or you see timeouts in HID
-  transactions, say Y; otherwise say N.
-
-EHCI (USB 2.0) support
-CONFIG_USB_EHCI_HCD
-  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
-  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
-  If your USB host controller supports USB 2.0, you will likely want to
-  configure this Host Controller Driver.  At this writing, the primary
-  implementation of EHCI is a chip from NEC, widely available in add-on
-  PCI cards, but implementations are in the works from other vendors
-  including Intel and Philips.  Motherboard support is appearing.
-
-  EHCI controllers are packaged with "companion" host controllers (OHCI
-  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
-  will connect to EHCI if it the device is high speed, otherwise they
-  connect to a companion controller.  If you configure EHCI, you should
-  probably configure the OHCI (for NEC and some other vendors) USB Host
-  Controller Driver too.
-
-  You may want to read <file:Documentation/usb/ehci.txt>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ehci-hcd.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-UHCI (Intel PIIX4, VIA, ...) support
-CONFIG_USB_UHCI
-  The Universal Host Controller Interface is a standard by Intel for
-  accessing the USB hardware in the PC (which is also called the USB
-  host controller). If your USB host controller conforms to this
-  standard, you may want to say Y, but see below. All recent boards
-  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
-  i810, i820) conform to this standard. Also all VIA PCI chipsets
-  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
-  133).
-
-  Currently there exist two drivers for UHCI host controllers: this
-  one and the so-called JE driver, which you can get from
-  "UHCI alternate (JE) support", below. You need only one.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usb-uhci.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-UHCI (Intel PIIX4, VIA, ...) alternate (JE) support
-CONFIG_USB_UHCI_ALT
-  The Universal Host Controller Interface is a standard by Intel for
-  accessing the USB hardware in the PC (which is also called the USB
-  host controller). If your USB host controller conforms to this
-  standard, you may want to say Y, but see below. All recent boards
-  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
-  i810, i820) conform to this standard. Also all VIA PCI chipsets
-  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
-  133). If unsure, say Y.
-
-  Currently there exist two drivers for UHCI host controllers: this
-  so-called JE driver, and the one you get from "UHCI support", above.
-  You need only one.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called uhci.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support
-CONFIG_USB_OHCI
-  The Open Host Controller Interface is a standard by
-  Compaq/Microsoft/National for accessing the USB PC hardware (also
-  called USB host controller). If your USB host controller conforms to
-  this standard, say Y. The USB host controllers on most non-Intel
-  architectures and on several x86 compatibles with non-Intel chipsets
-  -- like SiS (aktual 610, 610 and so on) or ALi (ALi IV, ALi V,
-  Aladdin Pro..) -- conform to this standard.
-
-  You may want to read <file:Documentation/usb/ohci.txt>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usb-ohci.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Human Interface Device (full HID) support
-CONFIG_USB_HID
-  Say Y here if you want full HID support to connect keyboards,
-  mice, joysticks, graphic tablets, or any other HID based devices
-  to your computer via USB. You can't use this driver and the
-  HIDBP (Boot Protocol) keyboard and mouse drivers at the same time.
-  More information is available: <file:Documentation/input/input.txt>.
-
-  If unsure, say Y.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called hid.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-/dev/usb/hiddev raw HID device support
-CONFIG_USB_HIDDEV
-  Say Y here if you want to support HID devices (from the USB
-  specification standpoint) that aren't strictly user interface
-  devices, like monitor controls and Uninterruptable Power Supplies.
-
-  This module supports these devices separately using a separate
-  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
-  This driver requires CONFIG_USB_HID.
-
-  If unsure, say N.
-
-USB HIDBP Keyboard (basic) support
-CONFIG_USB_KBD
-  Say Y here if you don't want to use the generic HID driver for your
-  USB keyboard and prefer to use the keyboard in its limited Boot
-  Protocol mode instead. This driver is much smaller than the HID one.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usbkbd.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-USB HIDBP Mouse (basic) support
-CONFIG_USB_MOUSE
-  Say Y here if you don't want to use the generic HID driver for your
-  USB mouse and prefer to use the mouse in its limited Boot Protocol
-  mode instead. This driver is much smaller than the HID one.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usbmouse.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-Wacom Intuos/Graphire tablet support
-CONFIG_USB_WACOM
-  Say Y here if you want to use the USB version of the Wacom Intuos
-  or Graphire tablet.  Make sure to say Y to "Mouse support"
-  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-  (CONFIG_INPUT_EVDEV) as well.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called wacom.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Aiptek 8000U tablet support
-CONFIG_USB_AIPTEK
-  Say Y here if you want to use the USB version of the Aiptek 8000U
-  tablet.  Make sure to say Y to "Event interface support"
-  (CONFIG_INPUT_EVDEV) as well.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called aiptek.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Use input layer for ADB devices
-CONFIG_INPUT_ADBHID
-  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
-  such as keyboards, mice, joysticks, or graphic tablets handled by
-  the input layer.  If you say Y here, make sure to say Y to the
-  corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
-  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
-  support" (CONFIG_INPUT_EVDEV) as well.
-
-  If you say N here, you still have the option of using the old ADB
-  keyboard and mouse drivers.
-
-  If unsure, say Y.
-
-Input core support
-CONFIG_INPUT
-  Say Y here if you want to enable any of the following options for
-  USB Human Interface Device (HID) support.
-
-  Say Y here if you want to enable any of the USB HID options in the
-  USB support section which require Input core support.
-
-  Otherwise, say N.
-
-Keyboard support
-CONFIG_INPUT_KEYBDEV
-  Say Y here if you want your USB HID keyboard (or an ADB keyboard
-  handled by the input layer) to be able to serve as a system
-  keyboard.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called keybdev.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Mouse support
-CONFIG_INPUT_MOUSEDEV
-  Say Y here if you want your USB HID mouse (or ADB mouse handled by
-  the input layer) to be accessible as char devices 13:32+ -
-  /dev/input/mouseX and 13:63 - /dev/input/mice as an emulated ImPS/2
-  mouse.  That way, all user space programs will be able to use your
-  mouse.
-
-  If unsure, say Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mousedev.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Horizontal screen resolution
-CONFIG_INPUT_MOUSEDEV_SCREEN_X
-  If you're using a digitizer, or a graphic tablet, and want to use
-  it as a mouse then the mousedev driver needs to know the X window
-  screen resolution you are using to correctly scale the data. If
-  you're not using a digitizer, this value is ignored.
-
-Vertical screen resolution
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y
-  If you're using a digitizer, or a graphic tablet, and want to use
-  it as a mouse then the mousedev driver needs to know the X window
-  screen resolution you are using to correctly scale the data. If
-  you're not using a digitizer, this value is ignored.
-
-Joystick support
-CONFIG_INPUT_JOYDEV
-  Say Y here if you want your USB HID joystick or gamepad to be
-  accessible as char device 13:0+ - /dev/input/jsX device.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called joydev.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Event interface support
-CONFIG_INPUT_EVDEV
-  Say Y here if you want your USB or ADB HID device events be
-  accessible under char device 13:64+ - /dev/input/eventX in a generic
-  way.  This is the future ...
-
-USB Scanner support
-CONFIG_USB_SCANNER
-  Say Y here if you want to connect a USB scanner to your computer's
-  USB port. Please read <file:Documentation/usb/scanner.txt> and
-  <file:Documentation/usb/scanner-hp-sane.txt> for more information.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called scanner.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-HP 5300C scanner support 
-CONFIG_USB_HP5300
-  Say Y here if you want to connect a HP5300C scanner to your
-  computer's USB port.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called hp5300.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Audio support
-CONFIG_USB_AUDIO
-  Say Y here if you want to connect USB audio equipment such as
-  speakers to your computer's USB port.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called audio.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Modem (CDC ACM) support
-CONFIG_USB_ACM
-  This driver supports USB modems and ISDN adapters which support the
-  Communication Device Class Abstract Control Model interface.
-  Please read <file:Documentation/usb/acm.txt> for details.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called acm.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB serial converter support
-CONFIG_USB_SERIAL
-  Say Y here if you have a USB device that provides normal serial
-  ports, or acts like a serial device, and you want to connect it to
-  your USB bus.
-
-  Please read <file:Documentation/usb/usb-serial.txt> for more
-  information on the specifics of the different devices that are
-  supported, and on how to use them.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usbserial.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Generic Serial Driver
-CONFIG_USB_SERIAL_GENERIC
-  Say Y here if you want to use the generic USB serial driver.  Please
-  read <file:Documentation/usb/usb-serial.txt> for more information on
-  using this driver.  It is recommended that the "USB Serial converter
-  support" be compiled as a module for this driver to be used
-  properly.
-
-USB ConnectTech WhiteHEAT Serial Driver
-CONFIG_USB_SERIAL_WHITEHEAT
-  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
-  USB to serial converter device.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called whiteheat.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Handspring Visor Driver
-CONFIG_USB_SERIAL_VISOR
-  Say Y here if you want to connect to your HandSpring Visor, Palm
-  m500 or m505 through its USB docking station. See
-  <http://usbvisor.sourceforge.net/> for more information on using this
-  driver.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called visor.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Compaq iPAQ Driver
-CONFIG_USB_SERIAL_IPAQ
-  Say Y here if you want to connect to your Compaq iPAQ running
-  Windows CE 3.0 using a USB autosync cable. For information on using
-  the driver, read <file:Documentation/usb/usb-serial.txt>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ipaq.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB IR Dongle Serial Driver
-CONFIG_USB_SERIAL_IR
-  Say Y here if you want to enable simple serial support for USB IrDA
-  devices.  This is useful if you do not want to use the full IrDA
-  stack.
-  
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ir-usb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB IR Dongle Serial Driver
-CONFIG_USB_SERIAL_IR
-  Say Y here if you want to enable simple serial support for USB IrDA
-  devices.  This is useful if you do not want to use the full IrDA
-  stack.
-  
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ir-usb.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Belkin and Paracom Single Port Serial Driver
-CONFIG_USB_SERIAL_BELKIN
-  Say Y here if you want to use a Belkin USB Serial single port
-  adaptor (F5U103 is one of the model numbers) or the Peracom single
-  port USB to serial adapter.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called belkin_sa.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB FTDI Single Port Serial Driver
-CONFIG_USB_SERIAL_FTDI_SIO
-  Say Y here if you want to use a FTDI SIO single port USB to serial
-  converter device. The implementation I have is called the USC-1000.
-  This driver has also be tested with the 245 and 232 devices.
-
-  See <http://ftdi-usb-sio.sourceforge.net/> for more
-  information on this driver and the device.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ftdi_sio.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Keyspan PDA Single Port Serial Driver
-CONFIG_USB_SERIAL_KEYSPAN_PDA
-  Say Y here if you want to use a Keyspan PDA single port USB to
-  serial converter device.  This driver makes use of firmware
-  developed from scratch by Brian Warner.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called keyspan_pda.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Xircom / Entregra Single Port Serial Driver
-CONFIG_USB_SERIAL_XIRCOM
-  Say Y here if you want to use a Xircom or Entregra single port USB to
-  serial converter device.  This driver makes use of firmware
-  developed from scratch by Brian Warner.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called keyspan_pda.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Keyspan USA-xxx Serial Driver
-CONFIG_USB_SERIAL_KEYSPAN
-  Say Y here if you want to use Keyspan USB to serial converter
-  devices.  This driver makes use of Keyspan's official firmware
-  and was developed with their support.  You must also include
-  firmware to support your particular device(s).
-
-  See <http://misc.nu/hugh/keyspan.html> for more information.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called keyspan.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Keyspan USA-28 Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA28
-  Say Y here to include firmware for the USA-28 converter.
-
-USB Keyspan USA-28X Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA28X
-  Say Y here to include firmware for the USA-28X converter.
-  Be sure you have a USA-28X, there are also 28XA and 28XB
-  models, the label underneath has the actual part number.
-
-USB Keyspan USA-28XA Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA
-  Say Y here to include firmware for the USA-28XA converter.
-  Be sure you have a USA-28XA, there are also 28X and 28XB
-  models, the label underneath has the actual part number.
-
-USB Keyspan USA-28XB Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB
-  Say Y here to include firmware for the USA-28XB converter.
-  Be sure you have a USA-28XB, there are also 28X and 28XA
-  models, the label underneath has the actual part number.
-
-USB Keyspan USA-19 Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA19
-  Say Y here to include firmware for the USA-19 converter.
-
-USB Keyspan USA-18X Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA18X
-  Say Y here to include firmware for the USA-18X converter.
-
-USB Keyspan USA-19W Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA19W
-  Say Y here to include firmware for the USA-19W converter.
-
-USB Keyspan USA-49W Firmware
-CONFIG_USB_SERIAL_KEYSPAN_USA49W
-  Say Y here to include firmware for the USA-49W converter.
-
-USB ZyXEL omni.net LCD Plus Driver
-CONFIG_USB_SERIAL_OMNINET
-  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called omninet.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Digi International AccelePort USB Serial Driver
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT
-  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
-  2 port (plus parallel port) and 4 port USB serial converters.  The
-  parallel port on the USB 2 appears as a third serial port on Linux.
-  The Digi Acceleport USB 8 is not yet supported by this driver.
-
-  This driver works under SMP with the usb-uhci driver.  It does not
-  work under SMP with the uhci driver.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called digi_acceleport.o.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-USB Empeg empeg-car Mark I/II Driver
-CONFIG_USB_SERIAL_EMPEG
-  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
-  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
-  device node.  See <file:Documentation/usb/usb-serial.txt> for more
-  tidbits of information.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called empeg.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB MCT Single Port Serial Driver
-CONFIG_USB_SERIAL_MCT_U232
-  Say Y here if you want to use a USB Serial single port adapter from
-  Magic Control Technology Corp. (U232 is one of the model numbers).
-
-  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
-  BAY devices.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mct_u232.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Prolific 2303 Single Port Serial Driver
-CONFIG_USB_SERIAL_PL2303
-  Say Y here if you want to use the PL2303 USB Serial single port
-  adapter from Prolific.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pl2303.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB REINER SCT cyberJack pinpad/e-com chipcard reader
-CONFIG_USB_SERIAL_CYBERJACK
-  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
-  reader. This is an interface to ISO 7816 compatible contactbased
-  chipcards, e.g. GSM SIMs.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cyberjack.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-USB Edgeport Serial Driver
-CONFIG_USB_SERIAL_EDGEPORT
-  Say Y here if you want to use any of the following devices from
-  Inside Out Networks (Digi):
-       Edgeport/4
-       Rapidport/4
-       Edgeport/4t
-       Edgeport/2
-       Edgeport/4i
-       Edgeport/2i
-       Edgeport/421
-       Edgeport/21
-       Edgeport/8
-       Edgeport/8 Dual
-       Edgeport/2D8
-       Edgeport/4D8
-       Edgeport/8i
-       Edgeport/2 DIN
-       Edgeport/4 DIN
-       Edgeport/16 Dual
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called io_edgeport.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB PalmConnect (and other KL5KUSB105-based) Single Port Serial Driver
-CONFIG_USB_SERIAL_KLSI
-  Say Y here if you want to use a KL5KUSB105 - based single port
-  serial adapter. The most widely known -- and currently the only
-  tested -- device in this category is the PalmConnect USB Serial
-  adapter sold by Palm Inc. for use with their Palm III and Palm V
-  series PDAs.
-
-  Please read <file:Documentation/usb/usb-serial.txt> for more
-  information.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called kl5kusb105.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Serial Converter verbose debug
-CONFIG_USB_SERIAL_DEBUG
-  Say Y here if you want verbose debug messages from the USB Serial
-  Drivers sent to the kernel debug log.
-
-USB Printer support
-CONFIG_USB_PRINTER
-  Say Y here if you want to connect a USB printer to your computer's
-  USB port.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called printer.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB IBM (Xirlink) C-It Camera support
-CONFIG_USB_IBMCAM
-  Say Y here if you want to connect a IBM "C-It" camera, also known as
-  "Xirlink PC Camera" to your computer's USB port.  For more
-  information, read <file:Documentation/usb/ibmcam.txt>.
-
-  This driver uses the Video For Linux API.  You must enable
-  (Y or M in config) Video For Linux (under Character Devices)
-  to use this driver.  Information on this API and pointers to
-  "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ibmcam.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>. This
-  camera has several configuration options which can be specified when
-  you load the module.  Read <file:Documentation/usb/ibmcam.txt> to
-  learn more.
-
-USB OV511 Camera support
-CONFIG_USB_OV511
-  Say Y here if you want to connect this type of camera to your
-  computer's USB port. See <file:Documentation/usb/ov511.txt> for more
-  information and for a list of supported cameras.
-
-  This driver uses the Video For Linux API. You must say Y or M to
-  "Video For Linux" (under Character Devices) to use this driver.
-  Information on this API and pointers to "v4l" programs may be found
-  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ov511.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Communication Class Ethernet driver
-CONFIG_USB_CDCETHER
-  This driver supports devices conforming to the Communication Device
-  Class Ethernet Control Model.  This is used in some cable modems.
-  For more details on the specification, get the Communication Device
-  Class specification from <http://www.usb.org/>.
-
-  This driver should work with the following devices:
-        * Ericsson PipeRider (all variants)
-        * Motorola (DM100 and SB4100)
-        * Broadcom Cable Modem (reference design)
-        * Toshiba PCX1100U and possibly other cable modems
-
-  The device creates a network device (ethX, where X depends on what
-  other networking devices you have in use), as for a normal PCI
-  or ISA based ethernet network card.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called CDCEther.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-NetChip 1080-based USB Host-to-Host Link
-CONFIG_USB_NET1080
-  The NetChip 1080 is a USB 1.1 host controller.  NetChip has a web
-  site with technical information at <http://www.netchip.com/>.
-
-Philips webcam support
-CONFIG_USB_PWC
-  Say Y or M here if you want to use one of these Philips USB webcams:
-  PCA645, PCA646, PCVC675, PCVC680, PCVC690, PCVC730, PCVC740, or
-  the Askey VC010. The PCA635, PCVC665 and PCVC720 are not supported
-  by this driver and never will be.
-
-  This driver has an optional plugin, which is distributed as a binary
-  module only.  It contains code that allow you to use higher
-  resolutions and framerates but may not be distributed as source.
-  But even without this plugin you can these cams for most
-  applications.
-
-  See <file:Documentation/usb/philips.txt> for more information and
-  installation instructions.
-
-  The built-in microphone is enabled by selecting USB Audio support.
-
-  This driver uses the Video For Linux API. You must say Y or M to
-  "Video For Linux" (under Character Devices) to use this driver.
-  Information on this API and pointers to "v4l" programs may be found
-  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pwc.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB SE401 Camera support
-CONFIG_USB_SE401
-  Say Y here if you want to connect this type of camera to your
-  computer's USB port. See <file:Documentation/usb/se401.txt> for more
-  information and for a list of supported cameras.
-
-  This driver uses the Video For Linux API. You must say Y or M to
-  "Video For Linux" (under Multimedia Devices) to use this driver.
-  Information on this API and pointers to "v4l" programs may be found
-  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called se401.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB STV680 (Pencam) Camera support
-CONFIG_USB_STV680
-  Say Y here if you want to connect this type of camera to your
-  computer's USB port. This includes the Pencam line of cameras.
-  See <file:Documentation/usb/stv680.txt> for more information and for
-  a list of supported cameras.
-
-  This driver uses the Video For Linux API. You must say Y or M to
-  "Video For Linux" (under Multimedia Devices) to use this driver.
-  Information on this API and pointers to "v4l" programs may be found
-  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called stv680.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Vicam
-CONFIG_USB_VICAM
-  Say Y here if you have 3com homeconnect camera (vicam).
-
-  This driver uses the Video For Linux API. You must say Y or M to
-  "Video For Linux" (under Multimedia Devices) to use this driver.
-  Information on this API and pointers to "v4l" programs may be found
-  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called vicam.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-
-Pegasus/Pegasus II based USB-Ethernet device support
-CONFIG_USB_PEGASUS
-  Say Y here if you know you have Pegasus or Pegasus II based adapter.
-  If in doubt then look at linux/drivers/usb/pegasus.h for the complete
-  list of supported devices.
-  If your particular adapter is not in the list and you are _sure_ it
-  is Pegasus or Pegasus II based then send me (pmanolov@lnxw.com) vendor
-  and device IDs.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pegasus.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB KLSI KL5USB101-based Ethernet device support '
-CONFIG_USB_KAWETH
-  Say Y here if you want to use one of the following 10Mbps only
-  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
-       3Com 3C19250
-       ADS USB-10BT
-       ATEN USB Ethernet
-       ASANTE USB To Ethernet Adapter
-       AOX Endpoints USB Ethernet
-       Correga K.K.
-       D-Link DSB-650C and DU-E10
-       Entrega / Portgear E45
-       I-O DATA USB-ET/T
-       Jaton USB Ethernet Device Adapter
-       Kingston Technology USB Ethernet Adapter
-       Linksys USB10T
-       Mobility USB-Ethernet Adapter
-       NetGear EA-101
-       Peracom Enet and Enet2
-       Portsmith Express Ethernet Adapter
-       Shark Pocket Adapter
-       SMC 2202USB
-       Sony Vaio port extender
-
-  This driver is likely to work with most 10Mbps only USB Ethernet
-  adapters, including some "no brand" devices. It does NOT work on
-  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
-  the CATC NetMate driver for those. If you are not sure which one
-  you need, select both, and the correct one should be selected for
-  you.
-
-  This driver makes the adapter appear as a normal Ethernet interface,
-  typically on eth0, if it is the only ethernet device, or perhaps on
-  eth1, if you have a PCI or ISA ethernet card installed.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called kaweth.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB CATC NetMate-based Ethernet device support
-CONFIG_USB_CATC
-  Say Y if you want to use one of the following 10Mbps USB Ethernet
-  device based on the EL1210A chip. Supported devices are:
-    Belkin F5U111
-    CATC NetMate
-    CATC NetMate II
-    smartBridges smartNIC
-
-  This driver makes the adapter appear as a normal Ethernet interface,
-  typically on eth0, if it is the only ethernet device, or perhaps on
-  eth1, if you have a PCI or ISA ethernet card installed.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called catc.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Kodak DC-2xx Camera support
-CONFIG_USB_DC2XX
-  Say Y here if you want to connect this type of still camera to your
-  computer's USB port.  See <file:Documentation/usb/dc2xx.txt> for
-  more information; some non-Kodak cameras may also work with this
-  driver, given application support (such as <http://www.gphoto.org/>).
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dc2xx.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Mustek MDC800 Digital Camera support
-CONFIG_USB_MDC800
-  Say Y here if you want to connect this type of still camera to
-  your computer's USB port. This driver can be used with gphoto 0.4.3
-  and higher (look at <http://www.gphoto.org/>).
-  To use it create a device node with "mknod /dev/mustek c 180 32" and
-  configure it in your software.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mdc800.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB Mass Storage support
-CONFIG_USB_STORAGE
-  Say Y here if you want to connect USB mass storage devices to your
-  computer's USB port.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usb-storage.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Mass Storage verbose debug
-CONFIG_USB_STORAGE_DEBUG
-  Say Y here in order to have the USB Mass Storage code generate
-  verbose debugging messages.
-
-ISD-200 USB/ATA driver
-CONFIG_USB_STORAGE_ISD200
-  Say Y here if you want to use USB Mass Store devices based
-  on the In-Systems Design ISD-200 USB/ATA bridge.
-
-  Some of the products that use this chip are:
-
-    - Archos Jukebox 6000
-    - ISD SmartCable for Storage
-    - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
-    - Sony CRX10U CD-R/RW drive
-    - CyQ've CQ8060A CDRW drive
-    - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
-
-USS720 parport driver
-CONFIG_USB_USS720
-  This driver is for USB parallel port adapters that use the Lucent
-  Technologies USS-720 chip. These cables are plugged into your USB
-  port and provide USB compatibility to peripherals designed with
-  parallel port interfaces.
-
-  The chip has two modes: automatic mode and manual mode. In automatic
-  mode, it looks to the computer like a standard USB printer. Only
-  printers may be connected to the USS-720 in this mode. The generic
-  USB printer driver ("USB Printer support", above) may be used in
-  that mode, and you can say N here if you want to use the chip only
-  in this mode.
-
-  Manual mode is not limited to printers, any parallel port
-  device should work. This driver utilizes manual mode.
-  Note however that some operations are three orders of magnitude
-  slower than on a PCI/ISA Parallel Port, so timing critical
-  applications might not work.
-
-  Say Y here if you own an USS-720 USB->Parport cable and intend to
-  connect anything other than a printer to it.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called uss720.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-USB device file system
-CONFIG_USB_DEVICEFS
-  If you say Y here (and to "/proc file system support" in the "File
-  systems section, above), you will get a file /proc/bus/usb/devices
-  which lists the devices currently connected to your USB bus or
-  busses, a file /proc/bus/usb/drivers which lists the USB kernel
-  client drivers currently loaded, and for every connected device a
-  file named  "/proc/bus/usb/xxx/yyy", where xxx is the bus number and
-  yyy the device number; the latter files can be used by user space
-  programs to talk directly to the device. These files are "virtual",
-  meaning they are generated on the fly and not stored on the hard
-  drive.
-
-  You may need to mount the usbdevfs file system to see the files, use
-   mount -t usbdevfs none /proc/bus/usb
-
-  For the format of the various /proc/bus/usb/ files, please read
-  <file:Documentation/usb/proc_usb_info.txt>.
-
-  Please note that this code is completely unrelated to devfs, the
-  "/dev file system support".
-
-  Most users want to say Y here.
-
-Enforce USB bandwidth allocation
-CONFIG_USB_BANDWIDTH
-  If you say Y here, the USB subsystem enforces USB bandwidth
-  allocation and will prevent some device opens from succeeding
-  if they would cause USB bandwidth usage to go above 90% of
-  the bus bandwidth.
-
-  If you say N here, these conditions will cause warning messages
-  about USB bandwidth usage to be logged and some devices or
-  drivers may not work correctly.
-
-DABUSB driver
-CONFIG_USB_DABUSB
-  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
-  brought to you by the DAB-Team (<http://dab.in.tum.de/>).  This
-  driver can be taken as an example for URB-based bulk, control, and
-  isochronous transactions. URB's are explained in
-  <file:Documentation/usb/URB.txt>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dabusb.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Host-to-Host USB networking
-CONFIG_USB_USBNET
-  This driver supports network links over USB with USB "Network"
-  or "data transfer" cables, often used to network laptops to PCs.
-  Such cables have chips from suppliers such as Belkin/eTEK, GeneSys
-  (GeneLink), NetChip and Prolific. Intelligent USB devices could also
-  use this approach to provide Internet access, using standard USB
-  cabling. You can find these chips also on some motherboards with
-  USB PC2PC support.
-
-  These links will have names like "usb0", "usb1", etc.  They act
-  like two-node Ethernets, so you can use 802.1d Ethernet Bridging
-  (CONFIG_BRIDGE) to simplify your network routing.
-
-  This code is also available as a kernel module (code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called usbnet.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Freecom USB/ATAPI Bridge support
-CONFIG_USB_STORAGE_FREECOM
-  Support for the Freecom USB to IDE/ATAPI adaptor.
-  Freecom has a web page at <http://www.freecom.de/>.
-
-Microtech CompactFlash/SmartMedia reader
-CONFIG_USB_STORAGE_DPCM
-  Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia
-  reader, details at <http://www.microtechint.com/zio/index.html>.
-  This driver treats the flash card as a removable storage device.
-
-Sandisk SDDR-09 SmartMedia reader support
-CONFIG_USB_STORAGE_SDDR09
-  Say Y here to include additional code to support the Sandisk SDDR-09
-  SmartMedia reader in the USB Mass Storage driver.
-
-USB Diamond Rio500 support
-CONFIG_USB_RIO500
-  Say Y here if you want to connect a USB Rio500 mp3 player to your
-  computer's USB port. Please read <file:Documentation/usb/rio.txt>
-  for more information.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called rio500.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-USB Auerswald ISDN device support
-CONFIG_USB_AUERSWALD
-  Say Y here if you want to connect an Auerswald USB ISDN Device
-  to your computer's USB port.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called auerswald.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-D-Link DSB-R100 FM radio support
-CONFIG_USB_DSBR
-  Say Y here if you want to connect this type of radio to your
-  computer's USB port. Note that the audio is not digital, and
-  you must connect the line out connector to a sound card or a
-  set of speakers.
-
-  This driver uses the Video For Linux API.  You must enable
-  (Y or M in config) Video For Linux (under Character Devices)
-  to use this driver.  Information on this API and pointers to
-  "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dsbr100.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Always do synchronous disk IO for UBD
-CONFIG_BLK_DEV_UBD_SYNC
-  The User-Mode Linux port includes a driver called UBD which will let
-  you access arbitrary files on the host computer as block devices.
-  Writes to such a block device are not immediately written to the
-  host's disk; this may cause problems if, for example, the User-Mode
-  Linux 'Virtual Machine' uses a journalling file system and the host
-  computer crashes.
-
-  Synchronous operation (i.e. always writing data to the host's disk
-  immediately) is configurable on a per-UBD basis by using a special
-  kernel command line option.  Alternatively, you can say Y here to
-  turn on synchronous operation by default for all block.
-
-  If you're running a journalling file system (like reiserfs, for
-  example) in your virtual machine, you will want to say Y here.  If
-  you care for the safety of the data in your virtual machine, Y is a
-  wise choice too.  In all other cases (for example, if you're just
-  playing around with User-Mode Linux) you can choose N.
-
-Enable ptrace proxy
-CONFIG_PT_PROXY
-  This option enables a debugging interface which allows gdb to debug
-  the kernel without needing to actually attach to kernel threads.
-  If you want to do kernel debugging, say Y here; otherwise say N.
-
-Management console
-CONFIG_MCONSOLE
-  The user mode linux management console is a low-level interface to
-  the kernel, somewhat like the i386 SysRq interface.  Since there is
-  a full-blown operating system running under every user mode linux
-  instance, there is much greater flexibility possible than with the
-  SysRq mechanism.
-
-  If you answer 'Y' to this option, to use this feature, you need the
-  mconsole client (called uml_mconsole) which is present in CVS in
-  2.4.5-9um and later (path /tools/mconsole), and is also in the
-  distribution RPM package in 2.4.6 and later.
-
-  It is safe to say 'Y' here.
-
-Enable kernel debugging symbols
-CONFIG_DEBUGSYM
-  When this is enabled, the User-Mode Linux binary will include
-  debugging symbols.  This enlarges the binary by a few megabytes,
-  but aids in tracking down kernel problems in UML.  It is required
-  if you intend to do any kernel development.
-
-  If you're truly short on disk space or don't expect to report any
-  bugs back to the UML developers, say N, otherwise say Y.
-
-Enable gcov support
-CONFIG_GCOV
-  This option allows developers to retrieve coverage data from a UML
-  session.
-
-  See <http://user-mode-linux.sourceforge.net/gcov.html> for more
-  details.
-
-  If you're involved in UML kernel development and want to use gcov,
-  say Y.  If you're unsure, say N.
-
-Enable gprof support
-CONFIG_GPROF
-  This allows profiling of a User-Mode Linux kernel with the gprof
-  utility.
-
-  See <http://user-mode-linux.sourceforge.net/gprof.html> for more
-  details.
-
-  If you're involved in UML kernel development and want to use gprof,
-  say Y.  If you're unsure, say N.
-
-Host filesystem
-CONFIG_HOSTFS
-  While the User-Mode Linux port uses its own root file system for
-  booting and normal file access, this module lets the UML user
-  access files stored on the host.  It does not require any
-  network connection between the Host and UML.  An example use of
-  this might be:
-
-  mount none /tmp/fromhost -t hostfs -o /tmp/umlshare
-
-  where /tmp/fromhost is an empty directory inside UML and
-  /tmp/umlshare is a directory on the host with files the UML user
-  wishes to access.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/hostfs.html>.
-
-  If you'd like to be able to work with files stored on the host, 
-  say Y or M here; otherwise say N.
-
-Example IO Memory driver
-CONFIG_MMAPPER
-  The User-Mode Linux port can provide support for IO Memory
-  emulation with this option.  This allows a host file to be
-  specified as an I/O region on the kernel command line. That file
-  will be mapped into UML's kernel address space where a driver can
-  locate it and do whatever it wants with the memory, including
-  providing an interface to it for UML processes to use.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/iomem.html>.
-
-  If you'd like to be able to provide a simulated IO port space for
-  User-Mode Linux processes, say Y.  If unsure, say N.
-
-Virtual Serial Line
-CONFIG_SSL
-  The User-Mode Linux environment allows you to create virtual serial
-  lines on the UML that are usually made to show up on the host as
-  ttys or ptys.
-
-  See <http://user-mode-linux.sourceforge.net/input.html> for more
-  information and command line examples of how to use this facility.
-
-  Unless you have a specific reason for disabling this, say Y.
-
-Virtual network device
-CONFIG_UML_NET
-  While the User-Mode port cannot directly talk to any physical
-  hardware devices, this choice and the following transport options
-  provide one or more virtual network devices through which the UML
-  kernels can talk to each other, the host, and with the host's help,
-  machines on the outside world.
-
-  For more information, including explations of the networking and
-  sample configurations, see
-  <http://user-mode-linux.sourceforge.net/networking.html>.
-
-  If you'd like to be able to enable networking in the User-Mode
-  linux environment, say Y; otherwise say N.  Note that you must
-  enable at least one of the following transport options to actually
-  make use of UML networking.
-
-Daemon transport
-CONFIG_UML_NET_DAEMON
-  This User-Mode Linux network transport allows one or more running
-  UMLs on a single host to communicate with each other, but not to
-  the host.
-
-  To use this form of networking, you'll need to run the UML
-  networking daemon on the host.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/networking.html>  That site
-  has examples of the UML command line to use to enable Daemon
-  networking.
-
-  If you'd like to set up a network with other UMLs on a single host,
-  say Y.  If you need a network between UMLs on multiple physical
-  hosts, choose the Multicast Transport.  To set up a network with
-  the host and/or other IP machines, say Y to the Ethertap or Slip
-  transports.  You'll need at least one of them, but may choose
-  more than one without conflict.  If you don't need UML networking,
-  say N.
-
-Ethertap transport
-CONFIG_UML_NET_ETHERTAP
-  The Ethertap User-Mode Linux network transport allows a single
-  running UML to exchange packets with its host over one of the
-  host's Ethertap devices, such as /dev/tap0.  Additional running
-  UMLs can use additional Ethertap devices, one per running UML.
-  While the UML believes it's on a (multi-device, broadcast) virtual
-  Ethernet network, it's in fact communicating over a point-to-point
-  link with the host.
-
-  To use this, your host kernel must have support for Ethertap
-  devices.  Also, if your host kernel is 2.4.x, it must have 
-  CONFIG_NETLINK_DEV configured as Y or M.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/networking.html>  That site
-  has examples of the UML command line to use to enable Ethertap
-  networking.
-
-  If you'd like to set up an IP network with the host and/or the
-  outside world, say Y to this, the Daemon Transport and/or the 
-  Slip Transport.  You'll need at least one of them, but may choose
-  more than one without conflict.  If you don't need UML networking,
-  say N.
-
-TUN/TAP transport
-CONFIG_UML_NET_TUNTAP
-  The UML TUN/TAP network transport allows a UML instance to exchange
-  packets with the host over a TUN/TAP device.  This option will only
-  work with a 2.4 host, unless you've applied the TUN/TAP patch to
-  your 2.2 host kernel.
-
-  To use this transport, your host kernel must have support for TUN/TAP
-  devices, either built-in or as a module.
-
-Multicast transport
-CONFIG_UML_NET_MCAST
-  This Multicast User-Mode Linux network transport allows multiple
-  UMLs (even ones running on different host machines!) to talk to
-  each other over a virtual ethernet network.  However, it requires
-  at least one UML with one of the other transports to act as a
-  bridge if any of them need to be able to talk to their hosts or any
-  other IP machines.
-
-  To use this, your host kernel(s) must support IP Multicasting.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/networking.html>  That site
-  has examples of the UML command line to use to enable Multicast
-  networking, and notes about the security of this approach.
-
-  If you need UMLs on multiple physical hosts to communicate as if
-  they shared an Ethernet network, say Y.  If you need to communicate
-  with other IP machines, make sure you select one of the other
-  transports (possibly in addition to Multicast; they're not
-  exclusive).  If you don't need to network UMLs say N to each of
-  the transports.
-
-SLIP transport
-CONFIG_UML_NET_SLIP
-  The Slip User-Mode Linux network transport allows a running UML to
-  network with its host over a point-to-point link.  Unlike Ethertap,
-  which can carry any Ethernet frame (and hence even non-IP packets),
-  the Slip transport can only carry IP packets.
-
-  To use this, your host must support Slip devices.
-
-  For more information, see
-  <http://user-mode-linux.sourceforge.net/networking.html>.  That site
-  has examples of the UML command line to use to enable Slip
-  networking, and details of a few quirks with it.
-
-  The Ethertap Transport is preferred over Slip because of its
-  limitation.  If you prefer Slip, however, say Y here.  Otherwise
-  choose the Multicast transport (to network multiple UMLs on 
-  multiple hosts), Ethertap (to network with the host and the
-  outside world), and/or the Daemon transport (to network multiple
-  UMLs on a single host).  You may choose more than one without
-  conflict.  If you don't need UML networking, say N.
-
-Microtek USB scanner support
-CONFIG_USB_MICROTEK
-  Say Y here if you want support for the Microtek X6USB and
-  possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
-  Support for anything but the X6 is experimental.
-  Please report failures and successes.
-  The scanner will appear as a scsi generic device to the rest
-  of the system. Scsi support is required for this driver to compile
-  and work. SANE 1.0.4 or newer is needed to make use of your scanner.
-  This driver can be compiled as a module.
-
-HP 53xx and Minolta Dual Scanner support
-CONFIG_USB_HPUSBSCSI
-  Say Y here if you want support for the HP 53xx series of scanners
-  and the Minolta Scan Dual. This driver is experimental.
-  The scanner will be accessible as a SCSI device.
-
-USB Bluetooth support
-CONFIG_USB_BLUETOOTH
-  Say Y here if you want to connect a USB Bluetooth device to your
-  computer's USB port. You will need the Bluetooth stack (available
-  at <http://developer.axis.com/software/index.shtml>) to fully use
-  the device.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called bluetooth.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Minix fs support
-CONFIG_MINIX_FS
-  Minix is a simple operating system used in many classes about OS's.
-  The minix file system (method to organize files on a hard disk
-  partition or a floppy disk) was the original file system for Linux,
-  but has been superseded by the second extended file system ext2fs.
-  You don't want to use the minix file system on your hard disk
-  because of certain built-in restrictions, but it is sometimes found
-  on older Linux floppy disks.  This option will enlarge your kernel
-  by about 28 KB. If unsure, say N.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. The module
-  will be called minix.o.  Note that the file system of your root
-  partition (the one containing the directory /) cannot be compiled as
-  a module.
-
-Reiserfs support
-CONFIG_REISERFS_FS
-  Stores not just filenames but the files themselves in a balanced
-  tree.  Uses journaling.
-
-  Balanced trees are more efficient than traditional file system
-  architectural foundations.
-
-  In general, ReiserFS is as fast as ext2, but is very efficient with
-  large directories and small files.  Additional patches are needed
-  for NFS and quotas, please see <http://www.reiserfs.org/> for links.
-
-  It is more easily extended to have features currently found in
-  database and keyword search systems than block allocation based file
-  systems are.  The next version will be so extended, and will support
-  plugins consistent with our motto ``It takes more than a license to
-  make source code open.''
-
-  Read <http://www.reiserfs.org/> to learn more about reiserfs.
-
-  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
-  If you like it, you can pay us to add new features to it that you
-  need, buy a support contract, or pay us to port it to another OS.
-
-Enable extra Reiserfs consistency checks
-CONFIG_REISERFS_CHECK
-  If you set this to Y, then ReiserFS will perform every check it can
-  possibly imagine of its internal consistency throughout its
-  operation.  It will also go substantially slower.  More than once we
-  have forgotten that this was on, and then gone despondent over the
-  latest benchmarks.:-) Use of this option allows our team to go all
-  out in checking for consistency when debugging without fear of its
-  effect on end users.  If you are on the verge of sending in a bug
-  report, say Y and you might get a useful error message.  Almost
-  everyone should say N.
-
-Publish some reiserfs-specific info under /proc/fs/reiserfs
-CONFIG_REISERFS_PROC_INFO
-  Create under /proc/fs/reiserfs hierarchy of files, displaying
-  various ReiserFS statistics and internal data on the expense of
-  making your kernel or module slightly larger (+8 KB).  This also
-  increases amount of kernel memory required for each mount.  Almost
-  everyone but ReiserFS developers and people fine-tuning reiserfs or
-  tracing problems should say N.
-
-Second extended fs support
-CONFIG_EXT2_FS
-  This is the de facto standard Linux file system (method to organize
-  files on a storage device) for hard disks.
-
-  You want to say Y here, unless you intend to use Linux exclusively
-  from inside a DOS partition using the UMSDOS file system. The
-  advantage of the latter is that you can get away without
-  repartitioning your hard drive (which often implies backing
-  everything up and restoring afterwards); the disadvantage is that
-  Linux becomes susceptible to DOS viruses and that UMSDOS is somewhat
-  slower than ext2fs. Even if you want to run Linux in this fashion,
-  it might be a good idea to have ext2fs around: it enables you to
-  read more floppy disks and facilitates the transition to a *real*
-  Linux partition later. Another (rare) case which doesn't require
-  ext2fs is a diskless Linux box which mounts all files over the
-  network using NFS (in this case it's sufficient to say Y to "NFS
-  file system support" below). Saying Y here will enlarge your kernel
-  by about 44 KB.
-
-  The Ext2fs-Undeletion mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, gives information about
-  how to retrieve deleted files on ext2fs file systems.
-
-  To change the behavior of ext2 file systems, you can use the tune2fs
-  utility ("man tune2fs"). To modify attributes of files and
-  directories on ext2 file systems, use chattr ("man chattr").
-
-  Ext2fs partitions can be read from within DOS using the ext2tool
-  command line tool package (available from
-  <ftp://ibiblio.org/pub/Linux/system/filesystems/ext2/>) and from
-  within Windows NT using the ext2nt command line tool package from
-  <ftp://ibiblio.org/pub/Linux/utils/dos/>.  Explore2fs is a
-  graphical explorer for ext2fs partitions which runs on Windows 95
-  and Windows NT and includes experimental write support; it is
-  available from
-  <http://jnewbigin-pc.it.swin.edu.au/Linux/Explore2fs.htm>.
-
-  If you want to compile this file system as a module ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called ext2.o.  Be aware however that the file system
-  of your root partition (the one containing the directory /) cannot
-  be compiled as a module, and so this could be dangerous.  Most
-  everyone wants to say Y here.
-
-Ext3 journaling file system support (EXPERIMENTAL)
-CONFIG_EXT3_FS
-  This is the journaling version of the Second extended file system
-  (often called ext3), the de facto standard Linux file system
-  (method to organize files on a storage device) for hard disks.
-
-  The journaling code included in this driver means you do not have
-  to run e2fsck (file system checker) on your file systems after a
-  crash.  The journal keeps track of any changes that were being made
-  at the time the system crashed, and can ensure that your file system
-  is consistent without the need for a lengthy check.
-
-  Other than adding the journal to the file system, the on-disk format
-  of ext3 is identical to ext2.  It is possible to freely switch
-  between using the ext3 driver and the ext2 driver, as long as the
-  file system has been cleanly unmounted, or e2fsck is run on the file
-  system.
-
-  To add a journal on an existing ext2 file system or change the
-  behavior of ext3 file systems, you can use the tune2fs utility ("man
-  tune2fs").  To modify attributes of files and directories on ext3
-  file systems, use chattr ("man chattr").  You need to be using
-  e2fsprogs version 1.20 or later in order to create ext3 journals
-  (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
-  If you want to compile this file system as a module ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called ext3.o.  Be aware however that the file system
-  of your root partition (the one containing the directory /) cannot
-  be compiled as a module, and so this may be dangerous.
-
-Journal Block Device support (JBD for ext3) (EXPERIMENTAL)
-CONFIG_JBD
-  This is a generic journaling layer for block devices.  It is
-  currently used by the ext3 file system, but it could also be used to
-  add journal support to other file systems or block devices such as
-  RAID or LVM.
-
-  If you are using the ext3 file system, you need to say Y here. If
-  you are not using ext3 then you will probably want to say N.
-
-  If you want to compile this device as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called jbd.o.  If you are compiling ext3 into the kernel,
-  you cannot compile this code as a module.
-
-JBD (ext3) debugging support
-CONFIG_JBD_DEBUG
-  If you are using the ext3 journaled file system (or potentially any
-  other file system/device using JBD), this option allows you to
-  enable debugging output while the system is running, in order to
-  help track down any problems you are having.  By default the
-  debugging output will be turned off.
-
-  If you select Y here, then you will be able to turn on debugging
-  with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
-  1 and 5, the higher the number, the more debugging output is
-  generated.  To turn debugging off again, do
-  "echo 0 > /proc/sys/fs/jbd-debug".
-
-Buffer Head tracing (DEBUG)
-CONFIG_BUFFER_DEBUG
-  If you are a kernel developer working with file systems or in the
-  block device layer, this buffer head tracing may help you to track
-  down bugs in your code.  This enables some debugging macros
-  (BUFFER_TRACE, etc.) which allow you to track the state of a buffer
-  through various layers of code.  The debugging code is used
-  primarily by ext3 and JBD code.
-
-  Because this option adds considerably to the size of each buffer,
-  most people will want to say N here.
-
-BFS file system support
-CONFIG_BFS_FS
-  Boot File System (BFS) is a file system used under SCO UnixWare to
-  allow the bootloader access to the kernel image and other important
-  files during the boot process.  It is usually mounted under /stand
-  and corresponds to the slice marked as "STAND" in the UnixWare
-  partition.  You should say Y if you want to read or write the files
-  on your /stand slice from within Linux.  You then also need to say Y
-  to "UnixWare slices support", below.  More information about the BFS
-  file system is contained in the file
-  <file:Documentation/filesystems/bfs.txt>.
-
-  If you don't know what this is about, say N.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called bfs.o.  Note that the file system of your root
-  partition (the one containing the directory /) cannot be compiled as
-  a module.
-
-Compressed ROM file system support
-CONFIG_CRAMFS
-  Saying Y here includes support for CramFs (Compressed ROM File
-  System).  CramFs is designed to be a simple, small, and compressed
-  file system for ROM based embedded systems.  CramFs is read-only,
-  limited to 256MB file systems (with 16MB files), and doesn't support
-  16/32 bits uid/gid, hard links and timestamps.
-
-  See <file:Documentation/filesystems/cramfs.txt> and
-  <file:fs/cramfs/README> for further information.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called cramfs.o.  Note that the root file system (the one
-  containing the directory /) cannot be compiled as a module.
-
-  If unsure, say N.
-
-CMS file system support
-CONFIG_CMS_FS
-  Read only support for CMS minidisk file systems found on IBM
-  mainframe systems.  Only the basic format is supported so far.  If
-  you don't know what CMS is you probably don't want to know any more.
-
-Virtual memory file system support
-CONFIG_TMPFS
-  Tmpfs is a file system which keeps all files in virtual memory.
-
-  In contrast to RAM disks, which get allocated a fixed amount of
-  physical RAM, tmpfs grows and shrinks to accommodate the files it
-  contains and is able to swap unneeded pages out to swap space.
-
-  Everything is "virtual" in the sense that no files will be created
-  on your hard drive; if you reboot, everything in tmpfs will be
-  lost.
-
-  You should mount the file system somewhere to be able to use
-  POSIX shared memory. Adding the following line to /etc/fstab should
-  take care of things:
-
-  tmpfs		/dev/shm	tmpfs		defaults	0 0
-
-  Remember to create the directory that you intend to mount tmpfs on
-  if necessary (/dev/shm is automagically created if you use devfs).
-
-  You can set limits for the number of blocks and inodes used by the
-  file system with the mount options "size", "nr_blocks" and
-  "nr_inodes". These parameters accept a suffix k, m or g for kilo,
-  mega and giga and can be changed on remount.
-
-  The initial permissions of the root directory can be set with the
-  mount option "mode".
-
-Simple RAM-based file system support
-CONFIG_RAMFS
-  Ramfs is a file system which keeps all files in RAM. It allows
-  read and write access.
-
-  It is more of an programming example than a useable file system.  If
-  you need a file system which lives in RAM with limit checking use
-  tmpfs.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ramfs.o.
-
-ISO 9660 CD-ROM file system support
-CONFIG_ISO9660_FS
-  This is the standard file system used on CD-ROMs.  It was previously
-  known as "High Sierra File System" and is called "hsfs" on other
-  Unix systems.  The so-called Rock-Ridge extensions which allow for
-  long Unix filenames and symbolic links are also supported by this
-  driver.  If you have a CD-ROM drive and want to do more with it than
-  just listen to audio CDs and watch its LEDs, say Y (and read
-  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>), thereby
-  enlarging your kernel by about 27 KB; otherwise say N.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called isofs.o.
-
-Microsoft Joliet CD-ROM extensions
-CONFIG_JOLIET
-  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
-  which allows for long filenames in unicode format (unicode is the
-  new 16 bit character code, successor to ASCII, which encodes the
-  characters of almost all languages of the world; see
-  <http://www.unicode.org/> for more information).  Say Y here if you
-  want to be able to read Joliet CD-ROMs under Linux.
-
-Transparent decompression extension
-CONFIG_ZISOFS
-  This is a Linux-specific extension to RockRidge which lets you store
-  data in compressed form on a CD-ROM and have it transparently
-  decompressed when the CD-ROM is accessed.  See
-  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
-  necessary to create such a filesystem.  Say Y here if you want to be
-  able to read such compressed CD-ROMs.
-
-UDF file system support (read-only)
-CONFIG_UDF_FS
-  This is the new file system used on some CD-ROMs and DVDs. Say Y if
-  you intend to mount DVD discs or CDRW's written in packet mode, or
-  if written to by other UDF utilities, such as DirectCD. This UDF
-  file system support is read-only. If you want to write to UDF
-  file systems on some media, you need to say Y to "UDF read-write
-  support" below in addition. Please read
-  <file:Documentation/filesystems/udf.txt>.
-
-  This file system support is also available as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). The module is called udf.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-UDF write support (DANGEROUS)
-CONFIG_UDF_RW
-  Say Y if you want to test write support for UDF file systems.
-  Due to lack of support for writing to CDR/CDRW's, this option
-  is only supported for hard discs, DVD-RAM, and loopback files.
-
-DOS FAT fs support
-CONFIG_FAT_FS
-  If you want to use one of the FAT-based file systems (the MS-DOS,
-  VFAT (Windows 95) and UMSDOS (used to run Linux on top of an
-  ordinary DOS partition) file systems), then you must say Y or M here
-  to include FAT support. You will then be able to mount partitions or
-  diskettes with FAT-based file systems and transparently access the
-  files on them, i.e. MSDOS files will look and behave just like all
-  other Unix files.
-
-  This FAT support is not a file system in itself, it only provides
-  the foundation for the other file systems. You will have to say Y or
-  M to at least one of "MSDOS fs support" or "VFAT fs support" in
-  order to make use of it.
-
-  Another way to read and write MSDOS floppies and hard drive
-  partitions from within Linux (but not transparently) is with the
-  mtools ("man mtools") program suite. You don't need to say Y here in
-  order to do that.
-
-  If you need to move large files on floppies between a DOS and a
-  Linux box, say Y here, mount the floppy under Linux with an MSDOS
-  file system and use GNU tar's M option. GNU tar is a program
-  available for Unix and DOS ("man tar" or "info tar").
-
-  It is now also becoming possible to read and write compressed FAT
-  file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
-  details.
-
-  The FAT support will enlarge your kernel by about 37 KB. If unsure,
-  say Y.
-
-  If you want to compile this as a module however ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called fat.o.  Note that if you compile the FAT
-  support as a module, you cannot compile any of the FAT-based file
-  systems into the kernel -- they will have to be modules as well.
-  The file system of your root partition (the one containing the
-  directory /) cannot be a module, so don't say M here if you intend
-  to use UMSDOS as your root file system.
-
-MSDOS fs support
-CONFIG_MSDOS_FS
-  This allows you to mount MSDOS partitions of your hard drive (unless
-  they are compressed; to access compressed MSDOS partitions under
-  Linux, you can either use the DOS emulator DOSEMU, described in the
-  DOSEMU-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>, or try dmsdosfs in
-  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-  intend to use dosemu with a non-compressed MSDOS partition, say Y
-  here) and MSDOS floppies. This means that file access becomes
-  transparent, i.e. the MSDOS files look and behave just like all
-  other Unix files.
-
-  If you want to use UMSDOS, the Unix-like file system on top of a
-  DOS file system, which allows you to run Linux from within a DOS
-  partition without repartitioning, you'll have to say Y or M here.
-
-  If you have Windows 95 or Windows NT installed on your MSDOS
-  partitions, you should use the VFAT file system (say Y to "VFAT fs
-  support" below), or you will not be able to see the long filenames
-  generated by Windows 95 / Windows NT.
-
-  This option will enlarge your kernel by about 7 KB. If unsure,
-  answer Y. This will only work if you said Y to "DOS FAT fs support"
-  as well. If you want to compile this as a module however ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called msdos.o.
-
-VFAT (Windows-95) fs support
-CONFIG_VFAT_FS
-  This option provides support for normal Windows file systems with
-  long filenames.  That includes non-compressed FAT-based file systems
-  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-  programs from the mtools package.
-
-  You cannot use the VFAT file system for your Linux root partition
-  (the one containing the directory /); use UMSDOS instead if you
-  want to run Linux from within a DOS partition (i.e. say Y to
-  "Unix like fs on top of std MSDOS fs", below).
-
-  The VFAT support enlarges your kernel by about 10 KB and it only
-  works if you said Y to the "DOS FAT fs support" above.  Please read
-  the file <file:Documentation/filesystems/vfat.txt> for details.  If
-  unsure, say Y.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called vfat.o.
-
-Unix-like file system on top of standard MSDOS fs
-CONFIG_UMSDOS_FS
-  Say Y here if you want to run Linux from within an existing DOS
-  partition of your hard drive. The advantage of this is that you can
-  get away without repartitioning your hard drive (which often implies
-  backing everything up and restoring afterwards) and hence you're
-  able to quickly try out Linux or show it to your friends; the
-  disadvantage is that Linux becomes susceptible to DOS viruses and
-  that UMSDOS is somewhat slower than ext2fs.  Another use of UMSDOS
-  is to write files with long unix filenames to MSDOS floppies; it
-  also allows Unix-style soft-links and owner/permissions of files on
-  MSDOS floppies.  You will need a program called umssync in order to
-  make use of UMSDOS; read
-  <file:Documentation/filesystems/umsdos.txt>.
-
-  To get utilities for initializing/checking UMSDOS file system, or
-  latest patches and/or information, visit the UMSDOS home page at
-  <http://www.voyager.hr/~mnalis/umsdos/>.
-
-  This option enlarges your kernel by about 28 KB and it only works if
-  you said Y to both "DOS FAT fs support" and "MSDOS fs support"
-  above.  If you want to compile this as a module ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called umsdos.o.  Note that the file system of your
-  root partition (the one containing the directory /) cannot be a
-  module, so saying M could be dangerous.  If unsure, say N.
-
-/proc file system support
-CONFIG_PROC_FS
-  This is a virtual file system providing information about the status
-  of the system. "Virtual" means that it doesn't take up any space on
-  your hard disk: the files are created on the fly by the kernel when
-  you try to access them. Also, you cannot read the files with older
-  version of the program less: you need to use more or cat.
-
-  It's totally cool; for example, "cat /proc/interrupts" gives
-  information about what the different IRQs are used for at the moment
-  (there is a small number of Interrupt ReQuest lines in your computer
-  that are used by the attached devices to gain the CPU's attention --
-  often a source of trouble if two devices are mistakenly configured
-  to use the same IRQ). The program procinfo to display some
-  information about your system gathered from the /proc file system.
-
-  Before you can use the /proc file system, it has to be mounted,
-  meaning it has to be given a location in the directory hierarchy.
-  That location should be /proc. A command such as "mount -t proc proc
-  /proc" or the equivalent line in /etc/fstab does the job.
-
-  The /proc file system is explained in the file
-  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
-  ("man 5 proc").
-
-  This option will enlarge your kernel by about 67 KB. Several
-  programs depend on this, so everyone should say Y here.
-
-Support for PReP Residual Data
-CONFIG_PREP_RESIDUAL
-  Some PReP systems have residual data passed to the kernel by the
-  firmware.  This allows detection of memory size, devices present and
-  other useful pieces of information.  Sometimes this information is
-  not present or incorrect.
-
-  Unless you expect to boot on a PReP system, there is not need to
-  select Y.
-
-/dev file system support
-CONFIG_DEVFS_FS
-  This is support for devfs, a virtual file system (like /proc) which
-  provides the file system interface to device drivers, normally found
-  in /dev. Devfs does not depend on major and minor number
-  allocations. Device drivers register entries in /dev which then
-  appear automatically, which means that the system administrator does
-  not have to create character and block special device files in the
-  /dev directory using the mknod command (or MAKEDEV script) anymore.
-
-  This is work in progress. If you want to use this, you *must* read
-  the material in <file:Documentation/filesystems/devfs/>, especially
-  the file README there.
-
-  If unsure, say N.
-
-Automatically mount devfs at boot time
-CONFIG_DEVFS_MOUNT
-  This option appears if you have CONFIG_DEVFS_FS enabled. Setting
-  this to 'Y' will make the kernel automatically mount devfs onto /dev
-  when the system is booted, before the init thread is started.
-  You can override this with the "devfs=nomount" boot option.
-
-  If unsure, say N.
-
-Debug devfs
-CONFIG_DEVFS_DEBUG
-  If you say Y here, then the /dev file system code will generate
-  debugging messages. See the file
-  <file:Documentation/filesystems/devfs/boot-options> for more
-  details.
-
-  If unsure, say N.
-
-NFS file system support
-CONFIG_NFS_FS
-  If you are connected to some other (usually local) Unix computer
-  (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
-  on that computer (the NFS server) using the Network File Sharing
-  protocol, say Y. "Mounting files" means that the client can access
-  the files with usual UNIX commands as if they were sitting on the
-  client's hard disk. For this to work, the server must run the
-  programs nfsd and mountd (but does not need to have NFS file system
-  support enabled in its kernel). NFS is explained in the Network
-  Administrator's Guide, available from
-  <http://www.linuxdoc.org/docs.html#guide>, on its man page: "man
-  nfs", and in the NFS-HOWTO.
-
-  A superior but less widely used alternative to NFS is provided by
-  the Coda file system; see "Coda file system support" below.
-
-  If you say Y here, you should have said Y to TCP/IP networking also.
-  This option would enlarge your kernel by about 27 KB.
-
-  This file system is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called nfs.o. If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-  If you are configuring a diskless machine which will mount its root
-  file system over NFS at boot time, say Y here and to "Kernel
-  level IP autoconfiguration" above and to "Root file system on NFS"
-  below. You cannot compile this driver as a module in this case.
-  There are two packages designed for booting diskless machines over
-  the net: netboot, available from
-  <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
-  available from <http://ftp1.sourceforge.net/etherboot/>.
-
-  If you don't know what all this is about, say N.
-
-Provide NFSv3 client support
-CONFIG_NFS_V3
-  Say Y here if you want your NFS client to be able to speak the newer
-  version 3 of the NFS protocol.
-
-  If unsure, say N.
-
-Root file system on NFS
-CONFIG_ROOT_NFS
-  If you want your Linux box to mount its whole root file system (the
-  one containing the directory /) from some other computer over the
-  net via NFS (presumably because your box doesn't have a hard disk),
-  say Y. Read <file:Documentation/nfsroot.txt> for details. It is
-  likely that in this case, you also want to say Y to "Kernel level IP
-  autoconfiguration" so that your box can discover its network address
-  at boot time.
-
-  Most people say N here.
-
-NFS server support
-CONFIG_NFSD
-  If you want your Linux box to act as an NFS *server*, so that other
-  computers on your local network which support NFS can access certain
-  directories on your box transparently, you have two options: you can
-  use the self-contained user space program nfsd, in which case you
-  should say N here, or you can say Y and use the kernel based NFS
-  server. The advantage of the kernel based solution is that it is
-  faster.
-
-  In either case, you will need support software; the respective
-  locations are given in the file <file:Documentation/Changes> in the
-  NFS section.
-
-  If you say Y here, you will get support for version 2 of the NFS
-  protocol (NFSv2). If you also want NFSv3, say Y to the next question
-  as well.
-
-  Please read the NFS-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  The NFS server is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called nfsd.o.  If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.  If unsure,
-  say N.
-
-Provide NFSv3 server support
-CONFIG_NFSD_V3
-  If you would like to include the NFSv3 server as well as the NFSv2
-  server, say Y here.  If unsure, say Y.
-
-Provide NFS over TCP server support DEVELOPER ONLY
-CONFIG_NFSD_TCP
-  If you are a developer and want to work on fixing problems with
-  NFS server over TCP support, say Y here.  If unsure, say N.
-
-  Some problems can be found by looking for FIXME in
-  <file:net/sunrpc/svcsock.c>.
-
-OS/2 HPFS file system support
-CONFIG_HPFS_FS
-  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
-  is the file system used for organizing files on OS/2 hard disk
-  partitions. Say Y if you want to be able to read files from and
-  write files to an OS/2 HPFS partition on your hard drive. OS/2
-  floppies however are in regular MSDOS format, so you don't need this
-  option in order to be able to read them. Read
-  <file:Documentation/filesystems/hpfs.txt>.
-
-  This file system is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called hpfs.o.  If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.  If unsure,
-  say N.
-
-NTFS file system support (read-only)
-CONFIG_NTFS_FS
-  NTFS is the file system of Microsoft Windows NT. Say Y if you want
-  to get read access to files on NTFS partitions of your hard drive.
-  The Linux NTFS driver supports most of the mount options of the VFAT
-  driver, see <file:Documentation/filesystems/ntfs.txt>. Saying Y here
-  will give you read-only access to NTFS partitions.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ntfs.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-NTFS write support (DANGEROUS)
-CONFIG_NTFS_RW
-  If you say Y here, you will (maybe) be able to write to NTFS file
-  systems as well as read from them. The read-write support in NTFS
-  is far from being complete and is not well tested. If you say Y
-  here, back up your NTFS volume first, since it will probably get
-  damaged. Also, download the Linux-NTFS project distribution from
-  Sourceforge at <http://linux-ntfs.sf.net/> and always run the
-  included ntfsfix utility after writing to an NTFS partition from
-  Linux to fix some of the damage done by the driver. You should run
-  ntfsfix _after_ unmounting the partition in Linux but _before_
-  rebooting into Windows. When Windows next boots, chkdsk will be
-  run automatically to fix the remaining damage.
-  Please note that write support is limited to Windows NT4 and
-  earlier versions.
-
-  If unsure, say N.
-
-System V/Xenix/V7/Coherent file system support
-CONFIG_SYSV_FS
-  SCO, Xenix and Coherent are commercial Unix systems for Intel
-  machines, and Version 7 was used on the DEC PDP-11. Saying Y
-  here would allow you to read from their floppies and hard disk
-  partitions.
-
-  If you have floppies or hard disk partitions like that, it is likely
-  that they contain binaries from those other Unix systems; in order
-  to run these binaries, you will want to install linux-abi which is a
-  a set of kernel modules that lets you run SCO, Xenix, Wyse,
-  UnixWare, Dell Unix and System V programs under Linux.  It is
-  available via FTP (user: ftp) from
-  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
-  NOTE: that will work only for binaries from Intel-based systems;
-  PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
-  If you only intend to mount files from some other Unix over the
-  network using NFS, you don't need the System V file system support
-  (but you need NFS file system support obviously).
-
-  Note that this option is generally not needed for floppies, since a
-  good portable way to transport files and directories between unixes
-  (and even other operating systems) is given by the tar program ("man
-  tar" or preferably "info tar").  Note also that this option has
-  nothing whatsoever to do with the option "System V IPC". Read about
-  the System V file system in
-  <file:Documentation/filesystems/sysv-fs.txt>.
-  Saying Y here will enlarge your kernel by about 27 KB.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called sysv.o.
-
-  If you haven't heard about all of this before, it's safe to say N.
-
-Amiga FFS file system support
-CONFIG_AFFS_FS
-  The Fast File System (FFS) is the common file system used on hard
-  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
-  if you want to be able to read and write files from and to an Amiga
-  FFS partition on your hard drive.  Amiga floppies however cannot be
-  read with this driver due to an incompatibility of the floppy
-  controller used in an Amiga and the standard floppy controller in
-  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
-  and <file:fs/affs/Changes>.
-
-  With this driver you can also mount disk files used by Bernd
-  Schmidt's Un*X Amiga Emulator
-  (<http://www.freiburg.linux.de/~uae/>).
-  If you want to do this, you will also need to say Y or M to "Loop
-  device support", above.
-
-  This file system is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called affs.o.  If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.  If unsure,
-  say N.
-
-Apple Macintosh file system support
-CONFIG_HFS_FS
-  If you say Y here, you will be able to mount Macintosh-formatted
-  floppy disks and hard drive partitions with full read-write access.
-  Please read <file:fs/hfs/HFS.txt> to learn about the available mount
-  options.
-
-  This file system support is also available as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). The module is called hfs.o.  If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-ROM file system support
-CONFIG_ROMFS_FS
-  This is a very small read-only file system mainly intended for
-  initial ram disks of installation disks, but it could be used for
-  other read-only media as well.  Read
-  <file:Documentation/filesystems/romfs.txt> for details.
-
-  This file system support is also available as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). The module is called romfs.o.  If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  Note that the file system of your
-  root partition (the one containing the directory /) cannot be a
-  module.
-
-  If you don't know whether you need it, then you don't need it:
-  answer N.
-
-QNX4 file system support (read only)
-CONFIG_QNX4FS_FS
-  This is the file system used by the operating system QNX 4. Say Y if
-  you intend to mount QNX hard disks or floppies. Unless you say Y to
-  "QNX4FS read-write support" below, you will only be able to read
-  these file systems.
-
-  This file system support is also available as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). The module is called qnx4.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  If you don't know whether you need it, then you don't need it:
-  answer N.
-
-QNX4FS write support (DANGEROUS)
-CONFIG_QNX4FS_RW
-  Say Y if you want to test write support for QNX4 file systems.
-
-Kernel automounter support
-CONFIG_AUTOFS_FS
-  The automounter is a tool to automatically mount remote file systems
-  on demand. This implementation is partially kernel-based to reduce
-  overhead in the already-mounted case; this is unlike the BSD
-  automounter (amd), which is a pure user space daemon.
-
-  To use the automounter you need the user-space tools from the autofs
-  package; you can find the location in <file:Documentation/Changes>.
-  You also want to answer Y to "NFS file system support", below.
-
-  If you want to use the newer version of the automounter with more
-  features, say N here and say Y to "Kernel automounter v4 support",
-  below.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called autofs.o.
-
-  If you are not a part of a fairly large, distributed network, you
-  probably do not need an automounter, and can say N here.
-
-Kernel automounter version 4 support (also supports v3)
-CONFIG_AUTOFS4_FS
-  The automounter is a tool to automatically mount remote file systems
-  on demand. This implementation is partially kernel-based to reduce
-  overhead in the already-mounted case; this is unlike the BSD
-  automounter (amd), which is a pure user space daemon.
-
-  To use the automounter you need the user-space tools from
-  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/testing-v4/>; you also
-  want to answer Y to "NFS file system support", below.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called autofs4.o.  You will need to add "alias autofs
-  autofs4" to your modules configuration file.
-
-  If you are not a part of a fairly large, distributed network or
-  don't have a laptop which needs to dynamically reconfigure to the
-  local network, you probably do not need an automounter, and can say
-  N here.
-
-EFS file system support (read-only)
-CONFIG_EFS_FS
-  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
-  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
-  uses the XFS file system for hard disk partitions however).
-
-  This implementation only offers read-only access. If you don't know
-  what all this is about, it's safe to say N. For more information
-  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
-  If you want to compile the EFS file system support as a module ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>. The module will be called efs.o.
-
-Journalling Flash File System (JFFS) support
-CONFIG_JFFS_FS
-  JFFS is the Journaling Flash File System developed by Axis
-  Communications in Sweden, aimed at providing a crash/powerdown-safe
-  file system for disk-less embedded devices. Further information is
-  available at (<http://developer.axis.com/software/jffs/>).
-
-JFFS debugging verbosity (0 = quiet, 3 = noisy)
-CONFIG_JFFS_FS_VERBOSE
-  Determines the verbosity level of the JFFS debugging messages.
-
-Journalling Flash File System v2 (JFFS2) support
-CONFIG_JFFS2_FS
-  JFFS2 is the second generation of the Journalling Flash File System
-  for use on diskless embedded devices. It provides improved wear
-  levelling, compression and support for hard links. You cannot use
-  this on normal block devices, only on 'MTD' devices.
-
-  Further information should be made available soon at
-  <http://sources.redhat.com/jffs2/>.
-
-JFFS2 debugging verbosity (0 = quiet, 2 = noisy)
-CONFIG_JFFS2_FS_DEBUG
-  This controls the amount of debugging messages produced by the JFFS2
-  code. Set it to zero for use in production systems. For evaluation,
-  testing and debugging, it's advisable to set it to one. This will
-  enable a few assertions and will print debugging messages at the
-  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
-  is unlikely to be useful - it enables extra debugging in certain
-  areas which at one point needed debugging, but when the bugs were
-  located and fixed, the detailed messages were relegated to level 2.
-
-  If reporting bugs, please try to have available a full dump of the
-  messages at debug level 1 while the misbehaviour was occurring.
-
-JFFS stats available in /proc filesystem
-CONFIG_JFFS_PROC_FS
-  Enabling this option will cause statistics from mounted JFFS file systems
-  to be made available to the user in the /proc/fs/jffs/ directory.
-
-UFS file system support (read-only)
-CONFIG_UFS_FS
-  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-  OpenBSD and NeXTstep) use a file system called UFS. Some System V
-  Unixes can create and mount hard disk partitions and diskettes using
-  this file system as well. Saying Y here will allow you to read from
-  these partitions; if you also want to write to them, say Y to the
-  experimental "UFS file system write support", below. Please read the
-  file <file:Documentation/filesystems/ufs.txt> for more information.
-
-  If you only intend to mount files from some other Unix over the
-  network using NFS, you don't need the UFS file system support (but
-  you need NFS file system support obviously).
-
-  Note that this option is generally not needed for floppies, since a
-  good portable way to transport files and directories between unixes
-  (and even other operating systems) is given by the tar program ("man
-  tar" or preferably "info tar").
-
-  When accessing NeXTstep files, you may need to convert them from the
-  NeXT character set to the Latin1 character set; use the program
-  recode ("info recode") for this purpose.
-
-  If you want to compile the UFS file system support as a module ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>. The module will be called ufs.o.
-
-  If you haven't heard about all of this before, it's safe to say N.
-
-UFS file system write support (DANGEROUS)
-CONFIG_UFS_FS_WRITE
-  Say Y here if you want to try writing to UFS partitions. This is
-  experimental, so you should back up your UFS partitions beforehand.
-
-Advanced partition selection
-CONFIG_PARTITION_ADVANCED
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned under an operating system running on a different
-  architecture than your Linux system.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about foreign partitioning schemes.
-
-  If unsure, say N.
-
-Acorn partition support
-CONFIG_ACORN_PARTITION
-  Support hard disks partitioned under Acorn operating systems.
-
-Native filecore partition support
-CONFIG_ACORN_PARTITION_ADFS
-  The Acorn Disc Filing System is the standard file system of the
-  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-  systems and the Acorn Archimedes range of machines.  If you say
-  `Y' here, Linux will support disk partitions created under ADFS.
-
-PowerTec partition support
-CONFIG_ACORN_PARTITION_POWERTEC
-  Support reading partition tables created on Acorn machines using
-  the PowerTec SCSI drive.
-
-RISCiX partition support
-CONFIG_ACORN_PARTITION_RISCIX
-  Once upon a time, there was a native Unix port for the Acorn series
-  of machines called RISCiX.  If you say 'Y' here, Linux will be able
-  to read disks partitioned under RISCiX.
-
-ICS partition support
-CONFIG_ACORN_PARTITION_ICS
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned using the ICS interface on Acorn machines.
-
-Alpha OSF partition support
-CONFIG_OSF_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned on an Alpha machine.
-
-Macintosh partition map support
-CONFIG_MAC_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned on a Macintosh.
-
-Windows' Logical Disk Manager (Dynamic Disk) support (EXPERIMENTAL)
-CONFIG_LDM_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned using Windows 2000's or XP's Logical Disk Manager.
-  They are also known as "Dynamic Disks".
-
-  Windows 2000 introduced the concept of Dynamic Disks to get around
-  the limitations of the PC's partitioning scheme.  The Logical Disk
-  Manager allows the user to repartion a disk and create spanned,
-  mirrored, striped or RAID volumes, all without the need for
-  rebooting.
-
-  Normal partitions are now called Basic Disks under Windows 2000 and
-  XP.
-
-  Technical documentation to accompany this driver is available from:
-  <http://linux-ntfs.sf.net/ldm/>.
-
-  If unsure, say N.
-
-Windows' LDM extra logging
-CONFIG_LDM_DEBUG
-  Say Y here if you would like LDM to log verbosely.  This could be
-  helpful if the driver doesn't work as expected and you'd like to
-  report a bug.
-
-  If unsure, say N.
-
-PC BIOS (MSDOS partition tables) support
-CONFIG_MSDOS_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned on an x86 PC (not necessarily by DOS).
-
-Amiga partition table support
-CONFIG_AMIGA_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned under AmigaOS.
-
-Atari partition table support
-CONFIG_ATARI_PARTITION
-  Say Y here if you would like to use hard disks under Linux which
-  were partitioned under the Atari OS.
-
-BSD disklabel (FreeBSD partition tables) support
-CONFIG_BSD_DISKLABEL
-  FreeBSD uses its own hard disk partition scheme on your PC. It
-  requires only one entry in the primary partition table of your disk
-  and manages it similarly to DOS extended partitions, putting in its
-  first sector a new partition table in BSD disklabel format. Saying Y
-  here allows you to read these disklabels and further mount FreeBSD
-  partitions from within Linux if you have also said Y to "UFS
-  file system support", above. If you don't know what all this is
-  about, say N.
-
-Minix subpartition support
-CONFIG_MINIX_SUBPARTITION
-  Minix 2.0.0/2.0.2 subpartition table support for Linux.
-  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
-  subpartitions.
-
-Sun partition table support
-CONFIG_SUN_PARTITION
-  Like most systems, SunOS uses its own hard disk partition table
-  format, incompatible with all others. Saying Y here allows you to
-  read these partition tables and further mount SunOS partitions from
-  within Linux if you have also said Y to "UFS file system support",
-  above. This is mainly used to carry data from a SPARC under SunOS to
-  your Linux box via a removable medium like magneto-optical or ZIP
-  drives; note however that a good portable way to transport files and
-  directories between unixes (and even other operating systems) is
-  given by the tar program ("man tar" or preferably "info tar"). If
-  you don't know what all this is about, say N.
-
-Solaris (x86) partition table support
-CONFIG_SOLARIS_X86_PARTITION
-  Like most systems, Solaris x86 uses its own hard disk partition
-  table format, incompatible with all others. Saying Y here allows you
-  to read these partition tables and further mount Solaris x86
-  partitions from within Linux if you have also said Y to "UFS
-  file system support", above.
-
-SGI partition support
-CONFIG_SGI_PARTITION
-  Say Y here if you would like to be able to read the hard disk
-  partition table format used by SGI machines.
-
-Ultrix partition table support
-CONFIG_ULTRIX_PARTITION
-  Say Y here if you would like to be able to read the hard disk
-  partition table format used by DEC (now Compaq) Ultrix machines.
-  Otherwise, say N.
-
-IBM disk label and partition support
-CONFIG_IBM_PARTITION
-  Say Y here if you would like to be able to read the hard disk
-  partition table format used by IBM DASD disks operating under CMS.
-  Otherwise, say N.
-
-ADFS file system support
-CONFIG_ADFS_FS
-  The Acorn Disc Filing System is the standard file system of the
-  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-  systems and the Acorn Archimedes range of machines. If you say Y
-  here, Linux will be able to read from ADFS partitions on hard drives
-  and from ADFS-formatted floppy discs. If you also want to be able to
-  write to those devices, say Y to "ADFS write support" below.
-
-  The ADFS partition should be the first partition (i.e.,
-  /dev/[hs]d?1) on each of your drives. Please read the file
-  <file:Documentation/filesystems/adfs.txt> for further details.
-
-  This code is also available as a module called adfs.o ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  If unsure, say N.
-
-ADFS write support (DANGEROUS)
-CONFIG_ADFS_FS_RW
-  If you say Y here, you will be able to write to ADFS partitions on
-  hard drives and ADFS-formatted floppy disks. This is experimental
-  codes, so if you're unsure, say N.
-
-/dev/pts file system for Unix98 PTYs
-CONFIG_DEVPTS_FS
-  You should say Y here if you said Y to "Unix98 PTY support" above.
-  You'll then get a virtual file system which can be mounted on
-  /dev/pts with "mount -t devpts". This, together with the pseudo
-  terminal master multiplexer /dev/ptmx, is used for pseudo terminal
-  support as described in The Open Group's Unix98 standard: in order
-  to acquire a pseudo terminal, a process opens /dev/ptmx; the number
-  of the pseudo terminal is then made available to the process and the
-  pseudo terminal slave can be accessed as /dev/pts/<number>. What was
-  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-  The GNU C library glibc 2.1 contains the requisite support for this
-  mode of operation; you also need client programs that use the Unix98
-  API. Please read <file:Documentation/Changes> for more information
-  about the Unix98 pty devices.
-
-  Note that the experimental "/dev file system support"
-  (CONFIG_DEVFS_FS)  is a more general facility.
-
-FreeVxFS file system support (VERITAS VxFS(TM) compatible)
-CONFIG_VXFS_FS
-  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
-  file system format.  VERITAS VxFS(TM) is the standard file system
-  of SCO UnixWare (and possibly others) and optionally available
-  for Sunsoft Solaris, HP-UX and many other operating systems.
-  Currently only readonly access is supported.
-
-  NOTE: the file system type as used by mount(1), mount(2) and
-        fstab(5) is 'vxfs' as it describes the file system format, not
-        the actual driver.
-
-  This file system is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called freevxfs.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  If
-  unsure, say N. 
-
-UnixWare slices support
-CONFIG_UNIXWARE_DISKLABEL
-  Like some systems, UnixWare uses its own slice table inside a
-  partition (VTOC - Virtual Table of Contents). Its format is
-  incompatible with all other OSes. Saying Y here allows you to read
-  VTOC and further mount UnixWare partitions read-only from within
-  Linux if you have also said Y to "UFS file system support" or
-  "System V and Coherent file system support", above.
-
-  This is mainly used to carry data from a UnixWare box to your
-  Linux box via a removable medium like magneto-optical, ZIP or
-  removable IDE drives. Note, however, that a good portable way to
-  transport files and directories between unixes (and even other
-  operating systems) is given by the tar program ("man tar" or
-  preferably "info tar").
-
-  If you don't know what all this is about, say N.
-
-SMB file system support (to mount Windows shares etc.)
-CONFIG_SMB_FS
-  SMB (Server Message Block) is the protocol Windows for Workgroups
-  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
-  files and printers over local networks.  Saying Y here allows you to
-  mount their file systems (often called "shares" in this context) and
-  access them just like any other Unix directory.  Currently, this
-  works only if the Windows machines use TCP/IP as the underlying
-  transport protocol, and not NetBEUI.  For details, read
-  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note: if you just want your box to act as an SMB *server* and make
-  files and printing services available to Windows clients (which need
-  to have a TCP/IP stack), you don't need to say Y here; you can use
-  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
-  for that.
-
-  General information about how to connect Linux, Windows machines and
-  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-  If you want to compile the SMB support as a module ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called smbfs.o.  Most people say N, however.
-
-Use a default NLS
-CONFIG_SMB_NLS_DEFAULT
-  Enabling this will make smbfs use nls translations by default. You
-  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
-  settings and you need to give the default nls for the SMB server as
-  CONFIG_SMB_NLS_REMOTE.
-
-  The nls settings can be changed at mount time, if your smbmount
-  supports that, using the codepage and iocharset parameters.
-
-  smbmount from samba 2.2.0 or later supports this.
-
-Default Remote NLS Option
-CONFIG_SMB_NLS_REMOTE
-  This setting allows you to specify a default value for which
-  codepage the server uses. If this field is left blank no
-  translations will be done by default. The local codepage/charset
-  default to CONFIG_NLS_DEFAULT.
-
-  The nls settings can be changed at mount time, if your smbmount
-  supports that, using the codepage and iocharset parameters.
-
-  smbmount from samba 2.2.0 or later supports this.
-
-Coda file system support (advanced network fs)
-CONFIG_CODA_FS
-  Coda is an advanced network file system, similar to NFS in that it
-  enables you to mount file systems of a remote server and access them
-  with regular Unix commands as if they were sitting on your hard
-  disk.  Coda has several advantages over NFS: support for
-  disconnected operation (e.g. for laptops), read/write server
-  replication, security model for authentication and encryption,
-  persistent client caches and write back caching.
-
-  If you say Y here, your Linux box will be able to act as a Coda
-  *client*.  You will need user level code as well, both for the
-  client and server.  Servers are currently user level, i.e. they need
-  no kernel support.  Please read
-  <file:Documentation/filesystems/coda.txt> and check out the Coda
-  home page <http://www.coda.cs.cmu.edu/>.
-
-  If you want to compile the coda client support as a module ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.  The module will be called coda.o.
-
-InterMezzo file system support (experimental, replicating fs)
-CONFIG_INTERMEZZO_FS
-  InterMezzo is a networked file system with disconnected operation
-  and kernel level write back caching.  It is most often used for
-  replicating potentially large trees or keeping laptop/desktop copies
-  in sync.
-
-  If you say Y or M your kernel or module will provide InterMezzo
-  support.  You will also need a file server daemon, which you can get
-  from <http://www.inter-mezzo.org/>.
-
-NCP file system support (to mount NetWare volumes)
-CONFIG_NCP_FS
-  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
-  used by Novell NetWare clients to talk to file servers.  It is to
-  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
-  to mount NetWare file server volumes and to access them just like
-  any other Unix directory.  For details, please read the file
-  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
-  the IPX-HOWTO from <http://www.linuxdoc.org/docs.html#howto>.
-
-  You do not have to say Y here if you want your Linux box to act as a
-  file *server* for Novell NetWare clients.
-
-  General information about how to connect Linux, Windows machines and
-  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called ncpfs.o.  Say N unless you are connected to a Novell
-  network.
-
-Packet signatures
-CONFIG_NCPFS_PACKET_SIGNING
-  NCP allows packets to be signed for stronger security. If you want
-  security, say Y.  Normal users can leave it off.  To be able to use
-  packet signing you must use ncpfs > 2.0.12.
-
-Proprietary file locking
-CONFIG_NCPFS_IOCTL_LOCKING
-  Allows locking of records on remote volumes.  Say N unless you have
-  special applications which are able to utilize this locking scheme.
-
-Clear remove/delete inhibit when needed
-CONFIG_NCPFS_STRONG
-  Allows manipulation of files flagged as Delete or Rename Inhibit.
-  To use this feature you must mount volumes with the ncpmount
-  parameter "-s" (ncpfs-2.0.12 and newer).  Say Y unless you are not
-  mounting volumes with -f 444.
-
-Use NFS namespace if available
-CONFIG_NCPFS_NFS_NS
-  Allows you to utilize NFS namespace on NetWare servers.  It brings
-  you case sensitive filenames.  Say Y.  You can disable it at
-  mount-time with the `-N nfs' parameter of ncpmount.
-
-Use LONG (OS/2) namespace if available
-CONFIG_NCPFS_OS2_NS
-  Allows you to utilize OS2/LONG namespace on NetWare servers.
-  Filenames in this namespace are limited to 255 characters, they are
-  case insensitive, and case in names is preserved.  Say Y.  You can
-  disable it at mount time with the -N os2 parameter of ncpmount.
-
-Lowercase DOS filenames on LONG namespace volume
-CONFIG_NCPFS_SMALLDOS
-  If you say Y here, every filename on a NetWare server volume using
-  the OS2/LONG namespace and created under DOS or on a volume using
-  DOS namespace will be converted to lowercase characters.
-  Saying N here will give you these filenames in uppercase.
-
-  This is only a cosmetic option since the OS2/LONG namespace is case
-  insensitive. The only major reason for this option is backward
-  compatibility when moving from DOS to OS2/LONG namespace support.
-  Long filenames (created by Win95) will not be affected.
-
-  This option does not solve the problem that filenames appear
-  differently under Linux and under Windows, since Windows does an
-  additional conversions on the client side. You can achieve similar
-  effects by saying Y to "Allow using of Native Language Support"
-  below.
-
-Use Native Language Support
-CONFIG_NCPFS_NLS
-  Allows you to use codepages and I/O charsets for file name
-  translation between the server file system and input/output. This
-  may be useful, if you want to access the server with other operating
-  systems, e.g. Windows 95. See also NLS for more Information.
-
-  To select codepages and I/O charsets use ncpfs-2.2.0.13 or newer.
-
-Symbolic links and mode permission bits
-CONFIG_NCPFS_EXTRAS
-  This enables the use of symbolic links and an execute permission
-  bit on NCPFS. The file server need not have long name space or NFS
-  name space loaded for these to work.
-
-  To use the new attributes, it is recommended to use the flags
-  '-f 600 -d 755' on the ncpmount command line.
-
-Default NLS Option
-CONFIG_NLS_DEFAULT
-  The default NLS used when mounting file system. Note, that this is
-  the NLS used by your console, not the NLS used by a specific file
-  system (if different) to store data (filenames) on a disk.
-  Currently, the valid values are:
-  big5, cp437, cp737, cp775, cp850, cp852, cp855, cp857, cp860, cp861,
-  cp862, cp863, cp864, cp865, cp866, cp869, cp874, cp932, cp936,
-  cp949, cp950, cp1251, cp1255, euc-jp, euc-kr, gb2312, iso8859-1,
-  iso8859-2, iso8859-3, iso8859-4, iso8859-5, iso8859-6, iso8859-7,
-  iso8859-8, iso8859-9, iso8859-13, iso8859-14, iso8859-15,
-  koi8-r, koi8-ru, koi8-u, sjis, tis-620, utf8.
-  If you specify a wrong value, it will use the built-in NLS;
-  compatible with iso8859-1.
-
-  If unsure, specify it as "iso8859-1".
-
-Codepage 437 (United States, Canada)
-CONFIG_NLS_CODEPAGE_437
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored
-  in so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage that is used in
-  the United States and parts of Canada. This is recommended.
-
-Codepage 737 (Greek)
-CONFIG_NLS_CODEPAGE_737
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored
-  in so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage that is used for
-  Greek. If unsure, say N.
-
-Codepage 775 (Baltic Rim)
-CONFIG_NLS_CODEPAGE_775
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored
-  in so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage that is used
-  for the Baltic Rim Languages (Latvian and Lithuanian). If unsure,
-  say N.
-
-Codepage 850 (Europe)
-CONFIG_NLS_CODEPAGE_850
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage that is used for
-  much of Europe -- United Kingdom, Germany, Spain, Italy, and [add
-  more countries here]. It has some characters useful to many European
-  languages that are not part of the US codepage 437.
-
-  If unsure, say Y.
-
-Codepage 852 (Central/Eastern Europe)
-CONFIG_NLS_CODEPAGE_852
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the Latin 2 codepage used by DOS
-  for much of Central and Eastern Europe. It has all the required
-  characters for these languages: Albanian, Croatian, Czech, English,
-  Finnish, Hungarian, Irish, German, Polish, Romanian, Serbian (Latin
-  transcription), Slovak, Slovenian, and Sorbian.
-
-Codepage 855 (Cyrillic)
-CONFIG_NLS_CODEPAGE_855
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Cyrillic.
-
-Codepage 857 (Turkish)
-CONFIG_NLS_CODEPAGE_857
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Turkish.
-
-Codepage 860 (Portuguese)
-CONFIG_NLS_CODEPAGE_860
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Portuguese.
-
-Codepage 861 (Icelandic)
-CONFIG_NLS_CODEPAGE_861
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Icelandic.
-
-Codepage 862 (Hebrew)
-CONFIG_NLS_CODEPAGE_862
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Hebrew.
-
-Codepage 863 (Canadian French)
-CONFIG_NLS_CODEPAGE_863
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Canadian
-  French.
-
-Codepage 864 (Arabic)
-CONFIG_NLS_CODEPAGE_864
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Arabic.
-
-Codepage 865 (Norwegian, Danish)
-CONFIG_NLS_CODEPAGE_865
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for the Nordic
-  European countries.
-
-Codepage 866 (Cyrillic/Russian)
-CONFIG_NLS_CODEPAGE_866
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for
-  Cyrillic/Russian.
-
-Codepage 869 (Greek)
-CONFIG_NLS_CODEPAGE_869
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Greek.
-
-Thai charset (CP874, TIS-620)
-CONFIG_NLS_CODEPAGE_874
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Thai.
-
-Windows CP1251 (Bulgarian, Belarusian)
-CONFIG_NLS_CODEPAGE_1251
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Russian and
-  Bulgarian and Belarusian.
-
-Japanese charsets (Shift-JIS, EUC-JP)
-CONFIG_NLS_CODEPAGE_932
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Shift-JIS
-  or EUC-JP. To use EUC-JP, you can use 'euc-jp' as mount option or
-  NLS Default value during kernel configuration, instead of 'cp932'.
-
-Simplified Chinese charset (CP936, GB2312)
-CONFIG_NLS_CODEPAGE_936
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Simplified
-  Chinese(GBK).
-
-Korean charset (CP949, EUC-KR)
-CONFIG_NLS_CODEPAGE_949
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for UHC.
-
-Traditional Chinese charset (Big5)
-CONFIG_NLS_CODEPAGE_950
-  The Microsoft FAT file system family can deal with filenames in
-  native language character sets. These character sets are stored in
-  so-called DOS codepages. You need to include the appropriate
-  codepage if you want to be able to read/write these filenames on
-  DOS/Windows partitions correctly. This does apply to the filenames
-  only, not to the file contents. You can include several codepages;
-  say Y here if you want to include the DOS codepage for Traditional
-  Chinese(Big5).
-
-NLS ISO 8859-1 (Latin 1; Western European Languages)
-CONFIG_NLS_ISO8859_1
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 1 character
-  set, which covers most West European languages such as Albanian,
-  Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German,
-  Galician, Irish, Icelandic, Italian, Norwegian, Portuguese, Spanish,
-  and Swedish. It is also the default for the US. If unsure, say Y.
-
-NLS ISO 8859-2 (Latin 2; Slavic/Central European Languages)
-CONFIG_NLS_ISO8859_2
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 2 character
-  set, which works for most Latin-written Slavic and Central European
-  languages: Czech, German, Hungarian, Polish, Rumanian, Croatian,
-  Slovak, Slovene.
-
-NLS ISO 8859-3 (Latin 3; Esperanto, Galician, Maltese, Turkish)
-CONFIG_NLS_ISO8859_3
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 3 character
-  set, which is popular with authors of Esperanto, Galician, Maltese,
-  and Turkish.
-
-NLS ISO 8859-4 (Latin 4; old Baltic charset)
-CONFIG_NLS_ISO8859_4
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 4 character
-  set which introduces letters for Estonian, Latvian, and
-  Lithuanian. It is an incomplete predecessor of Latin 7.
-
-NLS ISO 8859-5 (Cyrillic)
-CONFIG_NLS_ISO8859_5
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for ISO8859-5, a Cyrillic
-  character set with which you can type Bulgarian, Belarusian,
-  Macedonian, Russian, Serbian, and Ukrainian. Note that the charset
-  KOI8-R is preferred in Russia.
-
-NLS ISO 8859-6 (Arabic)
-CONFIG_NLS_ISO8859_6
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for ISO8859-6, the Arabic
-  character set.
-
-NLS ISO 8859-7 (Modern Greek)
-CONFIG_NLS_ISO8859_7
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for ISO8859-7, the Modern
-  Greek character set.
-
-Hebrew charsets (ISO-8859-8, CP1255)
-CONFIG_NLS_ISO8859_8
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for ISO8859-8, the Hebrew
-  character set.
-
-NLS ISO 8859-9 (Latin 5; Turkish)
-CONFIG_NLS_ISO8859_9
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 5 character
-  set, and it replaces the rarely needed Icelandic letters in Latin 1
-  with the Turkish ones. Useful in Turkey.
-
-NLS ISO 8859-10 (Latin 6; Nordic)
-CONFIG_NLS_ISO8859_10
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 6 character
-  set, which adds the last Inuit (Greenlandic) and Sami (Lappish)
-  letters that were missing in Latin 4 to cover the entire Nordic
-  area.
-
-NLS ISO 8859-13 (Latin 7; Baltic)
-CONFIG_NLS_ISO8859_13
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 7 character
-  set, which supports modern Baltic languages including Latvian
-  and Lithuanian.
-
-NLS ISO 8859-14 (Latin 8; Celtic)
-CONFIG_NLS_ISO8859_14
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 8 character
-  set, which adds the last accented vowels for Welsh (aka Cymraeg)
-  (and Manx Gaelic) that were missing in Latin 1.
-  <http://linux.speech.cymru.org/> has further information.
-
-NLS ISO 8859-15 (Latin 9; Western European languages with Euro)
-CONFIG_NLS_ISO8859_15
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the Latin 9 character
-  set, which covers most West European languages such as Albanian,
-  Catalan, Danish, Dutch, English, Estonian, Faeroese, Finnish,
-  French, German, Galician, Irish, Icelandic, Italian, Norwegian,
-  Portuguese, Spanish, and Swedish. Latin 9 is an update to
-  Latin 1 (ISO 8859-1) that removes a handful of rarely used
-  characters and instead adds support for Estonian, corrects the
-  support for French and Finnish, and adds the new Euro character.
-  If unsure, say Y.
-
-NLS KOI8-R (Russian)
-CONFIG_NLS_KOI8_R
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the preferred Russian
-  character set.
-
-NLS KOI8-U/RU (Ukrainian, Belarusian)
-CONFIG_NLS_KOI8_U
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the preferred Ukrainian
-  (koi8-u) and Belarusian (koi8-ru) character sets.
-
-NLS UTF8
-CONFIG_NLS_UTF8
-  If you want to display filenames with native language characters
-  from the Microsoft FAT file system family or from JOLIET CD-ROMs
-  correctly on the screen, you need to include the appropriate
-  input/output character sets. Say Y here for the UTF-8 encoding of
-  the Unicode/ISO9646 universal character set.
-
-Virtual terminal
-CONFIG_VT
-  If you say Y here, you will get support for terminal devices with
-  display and keyboard devices. These are called "virtual" because you
-  can run several virtual terminals (also called virtual consoles) on
-  one physical terminal. This is rather useful, for example one
-  virtual terminal can collect system messages and warnings, another
-  one can be used for a text-mode user session, and a third could run
-  an X session, all in parallel. Switching between virtual terminals
-  is done with certain key combinations, usually Alt-<function key>.
-
-  The setterm command ("man setterm") can be used to change the
-  properties (such as colors or beeping) of a virtual terminal. The
-  man page console_codes(4) ("man console_codes") contains the special
-  character sequences that can be used to change those properties
-  directly. The fonts used on virtual terminals can be changed with
-  the setfont ("man setfont") command and the key bindings are defined
-  with the loadkeys ("man loadkeys") command.
-
-  You need at least one virtual terminal device in order to make use
-  of your keyboard and monitor. Therefore, only people configuring an
-  embedded system would want to say N here in order to save some
-  memory; the only way to log into such a system is then via a serial
-  or network connection.
-
-  If unsure, say Y, or else you won't be able to do much with your new
-  shiny Linux system :-)
-
-Support for console on virtual terminal
-CONFIG_VT_CONSOLE
-  The system console is the device which receives all kernel messages
-  and warnings and which allows logins in single user mode. If you
-  answer Y here, a virtual terminal (the device used to interact with
-  a physical terminal) can be used as system console. This is the most
-  common mode of operations, so you should say Y here unless you want
-  the kernel messages be output only to a serial port (in which case
-  you should say Y to "Console on serial port", below).
-
-  If you do say Y here, by default the currently visible virtual
-  terminal (/dev/tty0) will be used as system console. You can change
-  that with a kernel command line option such as "console=tty3" which
-  would use the third virtual terminal as system console. (Try "man
-  bootparam" or see the documentation of your boot loader (lilo or
-  loadlin) about how to pass options to the kernel at boot time.)
-
-  If unsure, say Y.
-
-STI console
-CONFIG_STI_CONSOLE
-  The STI console is the builtin display/keyboard on HP-PARISC
-  machines.  Say Y here to build support for it into your kernel.
-  The alternative is to use your primary serial port as a console.
-
-Use MDIO for PHY configuration
-CONFIG_USE_MDIO
-  On some boards the hardware configuration of the ethernet PHY can be
-  used without any software interaction over the MDIO interface, so
-  all MII code can be omitted. Say N here if unsure or if you don't
-  need link status reports.
-
-860T FEC Ethernet
-CONFIG_FEC_ENET
-  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
-  the Motorola MPC8260.
-
-Ethernet on FCC1
-CONFIG_FCC1_ENET
-  Use MPC8260 fast Ethernet controller 1 to drive Ethernet (default).
-
-Ethernet on FCC2
-CONFIG_FCC2_ENET
-  Use MPC8260 fast Ethernet controller 2 to drive Ethernet.
-
-Ethernet on FCC3
-CONFIG_FCC3_ENET
-  Use MPC8260 fast Ethernet controller 3 to drive Ethernet.
-
-CPM SCC Ethernet
-CONFIG_SCC_ENET
-  Enable Ethernet support via the Motorola MPC8xx serial
-  commmunications controller.
-
-Ethernet on SCC1
-CONFIG_SCC1_ENET
-  Use MPC8xx serial communications controller 1 to drive Ethernet
-  (default).
-
-Ethernet on SCC2
-CONFIG_SCC2_ENET
-  Use MPC8xx serial communications controller 2 to drive Ethernet.
-
-Ethernet on SCC3
-CONFIG_SCC3_ENET
-  Use MPC8xx serial communications controller 3 to drive Ethernet.
-
-Use Big CPM Ethernet Buffers
-CONFIG_ENET_BIG_BUFFERS
-  Allocate large buffers for MPC8xx Etherenet.  Increases throughput
-  and decreases the likelihood of dropped packets, but costs memory.
-
-Apple Desktop Bus (ADB) support
-CONFIG_ADB
-  Apple Desktop Bus (ADB) support is for support of devices which
-  are connected to an ADB port.  ADB devices tend to have 4 pins.
-  If you have an Apple Macintosh prior to the iMac, or a
-  "Blue and White G3", you probably want to say Y here.  Otherwise
-  say N.
-
-Support for CUDA based PowerMacs
-CONFIG_ADB_CUDA
-  This provides support for CUDA based Power Macintosh systems.  This
-  includes most OldWorld PowerMacs, the first generation iMacs, the
-  Blue&White G3 and the Yikes G4 (PCI Graphics).  All later models
-  should use CONFIG_ADB_PMU instead.
-
-  If unsure say Y.
-
-Support for PMU-based PowerMacs
-CONFIG_ADB_PMU
-  On the PowerBook 3400 and 2400, the PMU is a 6805 microprocessor
-  core whose primary function is to control battery charging and
-  system power.  The PMU also controls the ADB (Apple Desktop Bus)
-  which connects to the keyboard and mouse, as well as the
-  non-volatile RAM and the RTC (real time clock) chip.  Say Y to
-  enable support for this device; you should do so if your machine
-  is one of these PowerBooks.
-
-Include MacIO ADB driver
-CONFIG_ADB_MACIO
-  Say Y here to include direct support for the ADB controller in the
-  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
-  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
-  OpenPIC controller and two RS422/Geoports.)
-
-Support for ADB keyboard (old driver)
-CONFIG_ADB_KEYBOARD
-  This option allows you to use an ADB keyboard attached to your
-  machine. Note that this disables any other (ie. PS/2) keyboard
-  support, even if your machine is physically capable of using both at
-  the same time.
-
-  If you use an ADB keyboard (4 pin connector), say Y here.
-  If you use a PS/2 keyboard (6 pin connector), say N here.
-
-HIL keyboard support
-CONFIG_HIL
-  The "Human Interface Loop" is a older, 8-channel USB-like controller
-  used in Hewlette Packard PA-RISC based machines.  There are a few
-  cases where it is seen on PC/MAC architectures as well, usually also
-  manufactured by HP.  This driver is based off MACH and BSD drivers,
-  and implements support for a keyboard attached to the HIL port.
-  Full support for the USB-like functions and non-keyboard channels of
-  the HIL is not provided for in this driver.  There are vestiges of
-  mouse support in the driver, but it is probably not working.  The
-  necessary hardware documentation to fully support the HIL controller
-  and interface it to the linux-input API is lacking.
-
-  Enable this option if you intend to use a HIL keyboard.
-
-Include IOP (IIfx/Quadra 9x0) ADB driver
-CONFIG_ADB_IOP
-  The I/O Processor (IOP) is an Apple custom IC designed to provide
-  intelligent support for I/O controllers.  It is described at
-  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
-  support for it, say 'Y' here.
-
-Mac II style Apple Desktop Bus support
-CONFIG_ADB_MACII
-  Say Y here if want your kernel to support Macintosh systems that use
-  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
-  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
-  Centris 650.
-
-Mac IIsi style Apple Desktop Bus support
-CONFIG_ADB_MACIISI
-  Say Y here if want your kernel to support Macintosh systems that use
-  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
-  II, LC, LC II, LC III, Performa 460, and the Performa 600.
-
-Apple 68K PowerBook Power Management and Desktop Bus support
-CONFIG_ADB_PMU68K
-  Say Y here if want your kernel to support the m68k based Powerbooks.
-  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
-  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
-  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
-  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
-  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
-
-Macintosh IIfx/Quadra 900/Quadra 950 floppy support
-CONFIG_BLK_DEV_SWIM_IOP
-  Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
-  floppy controller on the Macintosh IIfx and Quadra 900/950.
-
-Macintosh NS8390 based Ethernet support
-CONFIG_MAC8390
-  If you want to include a driver to support Nubus or LC-PDS
-  Ethernet cards using an NS8390 chipset or its equivalent, say Y
-  and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Macintosh CS89x0 based Ethernet support
-CONFIG_MAC89x0
-  Support for CS89x0 chipset based Ethernet cards.  If you have a
-  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
-  read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  This module will
-  be called mac89x0.o.
-
-Macintosh onboard AMD 79C940 MACE based Ethernet support
-CONFIG_MACMACE
-  Support for the onboard AMD 79C940 MACE Ethernet controller used in
-  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
-  say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Macintosh SONIC based Ethernet support (onboard, NuBus, LC, CS)
-CONFIG_MACSONIC
-  Support for NatSemi SONIC based Ethernet devices.  This includes
-  the onboard Ethernet in many Quadras as well as some LC-PDS,
-  a few Nubus and all known Comm Slot Ethernet cards.  If you have
-  one of these say Y and read the Ethernet-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt> as well as
-  <file:Documentation/networking/net-modules.txt>.  This module will
-  be called macsonic.o.
-
-Macintosh NCR5380 SCSI support
-CONFIG_MAC_SCSI
-  This is the NCR 5380 SCSI controller included on most of the 68030
-  based Macintoshes.  If you have one of these say Y and read the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-Macintosh NCR53c9[46] SCSI support
-CONFIG_SCSI_MAC_ESP
-  This is the NCR 53c9x SCSI controller found on most of the 68040
-  based Macintoshes.  If you have one of these say Y and read the
-  SCSI-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mac_esp.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Standard/generic (8250/16550 and compatible UARTs) serial support
-CONFIG_SERIAL
-  This selects whether you want to include the driver for the standard
-  serial ports.  The standard answer is Y.  People who might say N
-  here are those that are setting up dedicated Ethernet WWW/FTP
-  servers, or users that have one of the various bus mice instead of a
-  serial mouse and don't intend to use their machine's standard serial
-  port for anything.  (Note that the Cyclades and Stallion multi
-  serial port drivers do not need this driver built in for them to
-  work.)
-
-  If you want to compile this driver as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  serial.o.
-  [WARNING: Do not compile this driver as a module if you are using
-  non-standard serial ports, since the configuration information will
-  be lost when the driver is unloaded.  This limitation may be lifted
-  in the future.]
-
-  BTW1: If you have a mouseman serial mouse which is not recognized by
-  the X window system, try running gpm first.
-
-  BTW2: If you intend to use a software modem (also called Winmodem)
-  under Linux, forget it.  These modems are crippled and require
-  proprietary drivers which are only available under Windows.
-
-  Most people will say Y or M here, so that they can use serial mice,
-  modems and similar devices connecting to the standard serial ports.
-
-Support for console on serial port
-CONFIG_SERIAL_CONSOLE
-  If you say Y here, it will be possible to use a serial port as the
-  system console (the system console is the device which receives all
-  kernel messages and warnings and which allows logins in single user
-  mode). This could be useful if some terminal or printer is connected
-  to that serial port.
-
-  Even if you say Y here, the currently visible virtual console
-  (/dev/tty0) will still be used as the system console by default, but
-  you can alter that using a kernel command line option such as
-  "console=ttyS1". (Try "man bootparam" or see the documentation of
-  your boot loader (lilo or loadlin) about how to pass options to the
-  kernel at boot time.)
-
-  If you don't have a VGA card installed and you say Y here, the
-  kernel will automatically use the first serial line, /dev/ttyS0, as
-  system console.
-
-  If unsure, say N.
-
-Support for PowerMac serial ports
-CONFIG_MAC_SERIAL
-  If you have Macintosh style serial ports (8 pin mini-DIN), say Y
-  here. If you also have regular serial ports and enable the driver
-  for them, you can't currently use the serial console feature.
-
-Comtrol Rocketport support
-CONFIG_ROCKETPORT
-  This is a driver for the Comtrol Rocketport cards which provide
-  multiple serial ports. You would need something like this to connect
-  more than two modems to your Linux box, for instance in order to
-  become a dial-in server.
-
-  If you want to compile this driver as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  rocket.o.
-
-Digiboard Intelligent async support
-CONFIG_DIGIEPCA
-  This is a driver for Digi International's Xx, Xeve, and Xem series
-  of cards which provide multiple serial ports. You would need
-  something like this to connect more than two modems to your Linux
-  box, for instance in order to become a dial-in server. This driver
-  supports the original PC (ISA) boards as well as PCI, and EISA. If
-  you have a card like this, say Y here and read the file
-  <file:Documentation/digiepca.txt>.
-
-  NOTE: There is another, separate driver for the Digiboard PC boards:
-  "Digiboard PC/Xx Support" below. You should (and can) only select
-  one of the two drivers.
-
-  If you want to compile this driver as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called epca.o.
-
-Digiboard PC/Xx Support
-CONFIG_DIGI
-  This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
-  that give you many serial ports. You would need something like this
-  to connect more than two modems to your Linux box, for instance in
-  order to become a dial-in server. If you have a card like that, say
-  Y here and read the file <file:Documentation/digiboard.txt>.
-
-  If you want to compile this driver as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called pcxx.o.
-
-SDL RISCom/8 card support
-CONFIG_RISCOM8
-  This is a driver for the SDL Communications RISCom/8 multiport card,
-  which gives you many serial ports. You would need something like
-  this to connect more than two modems to your Linux box, for instance
-  in order to become a dial-in server. If you have a card like that,
-  say Y here and read the file <file:Documentation/riscom8.txt>.
-
-  Also it's possible to say M here and compile this driver as kernel
-  loadable module; the module will be called riscom8.o.
-
-Computone IntelliPort Plus serial support
-CONFIG_COMPUTONE
-  This driver supports the entire family of Intelliport II/Plus
-  controllers with the exception of the MicroChannel controllers and
-  products previous to the Intelliport II. These are multiport cards,
-  which give you many serial ports. You would need something like this
-  to connect more than two modems to your Linux box, for instance in
-  order to become a dial-in server. If you have a card like that, say
-  Y here and read <file:Documentation/computone.txt>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>. You will get
-  two modules called ip2.o and ip2main.o.
-
-Specialix IO8+ card support
-CONFIG_SPECIALIX
-  This is a driver for the Specialix IO8+ multiport card (both the
-  ISA and the PCI version) which gives you many serial ports. You
-  would need something like this to connect more than two modems to
-  your Linux box, for instance in order to become a dial-in server.
-
-  If you have a card like that, say Y here and read the file
-  <file:Documentation/specialix.txt>. Also it's possible to say M here
-  and compile this driver as kernel loadable module which will be
-  called specialix.o.
-
-Specialix DTR/RTS pin is RTS
-CONFIG_SPECIALIX_RTSCTS
-  The Specialix IO8+ card can only support either RTS or DTR. If you
-  say N here, the driver will use the pin as "DTR" when the tty is in
-  software handshake mode.  If you say Y here or hardware handshake is
-  on, it will always be RTS.  Read the file
-  <file:Documentation/specialix.txt> for more information.
-
-Specialix RIO system support
-CONFIG_RIO
-  This is a driver for the Specialix RIO, a smart serial card which
-  drives an outboard box that can support up to 128 ports.  Product
-  information is at <http://www.sphinxcst.co.uk/perle/multi.htm>.
-  There are both ISA and PCI versions.
-
-Support really old RIO/PCI cards
-CONFIG_RIO_OLDPCI
-  Older RIO PCI cards need some initialization-time configuration to
-  determine the IRQ and some control addresses.  If you have a RIO and
-  this doesn't seem to work, try setting this to Y.
-
-Cyclades async mux support
-CONFIG_CYCLADES
-  This is a driver for a card that gives you many serial ports. You
-  would need something like this to connect more than two modems to
-  your Linux box, for instance in order to become a dial-in server.
-  For information about the Cyclades-Z card, read
-  <file:drivers/char/README.cycladesZ>.
-
-  As of 1.3.9x kernels, this driver's minor numbers start at 0 instead
-  of 32.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called cyclades.o.
-
-  If you haven't heard about it, it's safe to say N.
-
-Cyclades-Z interrupt mode operation
-CONFIG_CYZ_INTR
-  The Cyclades-Z family of multiport cards allows 2 (two) driver op
-  modes: polling and interrupt. In polling mode, the driver will check
-  the status of the Cyclades-Z ports every certain amount of time
-  (which is called polling cycle and is configurable). In interrupt
-  mode, it will use an interrupt line (IRQ) in order to check the
-  status of the Cyclades-Z ports. The default op mode is polling. If
-  unsure, say N.
-
-Stallion multiport serial support
-CONFIG_STALDRV
-  Stallion cards give you many serial ports.  You would need something
-  like this to connect more than two modems to your Linux box, for
-  instance in order to become a dial-in server.  If you say Y here,
-  you will be asked for your specific card model in the next
-  questions.  Make sure to read <file:Documentation/stallion.txt> in
-  this case.  If you have never heard about all this, it's safe to
-  say N.
-
-Stallion EasyIO or EC8/32 support
-CONFIG_STALLION
-  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
-  card, then this is for you; say Y.  Make sure to read
-  <file:Documentation/stallion.txt>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called stallion.o.
-
-Stallion EC8/64, ONboard, Brumby support
-CONFIG_ISTALLION
-  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
-  serial multiport card, say Y here. Make sure to read
-  <file:Documentation/stallion.txt>.
-
-  To compile it as a module ( = code which can be inserted in and
-  removed from the running kernel whenever you want), say M here and
-  read <file:Documentation/modules.txt>. The module will be called
-  istallion.o.
-
-Microgate SyncLink adapter support
-CONFIG_SYNCLINK
-  Provides support for the SyncLink ISA and PCI multiprotocol serial
-  adapters. These adapters support asynchronous and HDLC bit
-  synchronous communication up to 10Mbps (PCI adapter).
-
-  This driver can only be built as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called synclink.o.  If you want to do that, say M
-  here.
-
-Synchronous HDLC line discipline support
-CONFIG_N_HDLC
-  Allows synchronous HDLC communications with tty device drivers that
-  support synchronous HDLC such as the Microgate SyncLink adapter.
-
-  This driver can only be built as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called n_hdlc.o. If you want to do that, say M
-  here.
-
-Specialix SX (and SI) card support
-CONFIG_SX
-  This is a driver for the SX and SI multiport serial cards.
-  Please read the file <file:Documentation/sx.txt> for details.
-
-  This driver can only be built as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sx.o. If you want to do that, say M here.
-
-Hayes ESP serial port support
-CONFIG_ESPSERIAL
-  This is a driver which supports Hayes ESP serial ports.  Both single
-  port cards and multiport cards are supported.  Make sure to read
-  <file:Documentation/hayes-esp.txt>.
-
-  To compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>.  The module will be
-  called esp.o.  If unsure, say N.
-
-Moxa Intellio support
-CONFIG_MOXA_INTELLIO
-  Say Y here if you have a Moxa Intellio multiport serial card.
-
-  This driver can also be built as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called moxa.o. If you want to do that, say M
-  here.
-
-Moxa SmartIO support
-CONFIG_MOXA_SMARTIO
-  Say Y here if you have a Moxa SmartIO multiport serial card.
-
-  This driver can also be built as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called mxser.o. If you want to do that, say M
-  here.
-
-Multi-Tech multiport card support
-CONFIG_ISI
-  This is a driver for the Multi-Tech cards which provide several
-  serial ports.  The driver is experimental and can currently only be
-  built as a module ( = code which can be inserted in and removed from
-  the running kernel whenever you want).  Please read
-  <file:Documentation/modules.txt>.  The module will be called
-  isicom.o.
-
-Unix98 PTY support
-CONFIG_UNIX98_PTYS
-  A pseudo terminal (PTY) is a software device consisting of two
-  halves: a master and a slave. The slave device behaves identical to
-  a physical terminal; the master device is used by a process to
-  read data from and write data to the slave, thereby emulating a
-  terminal. Typical programs for the master side are telnet servers
-  and xterms.
-
-  Linux has traditionally used the BSD-like names /dev/ptyxx for
-  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-  has a number of problems. The GNU C library glibc 2.1 and later,
-  however, supports the Unix98 naming standard: in order to acquire a
-  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-  terminal is then made available to the process and the pseudo
-  terminal slave can be accessed as /dev/pts/<number>. What was
-  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-  The entries in /dev/pts/ are created on the fly by a virtual
-  file system; therefore, if you say Y here you should say Y to
-  "/dev/pts file system for Unix98 PTYs" as well.
-
-  If you want to say Y here, you need to have the C library glibc 2.1
-  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
-  Read the instructions in <file:Documentation/Changes> pertaining to
-  pseudo terminals. It's safe to say N.
-
-Maximum number of Unix98 PTYs in use (0-2048)
-CONFIG_UNIX98_PTY_COUNT
-  The maximum number of Unix98 PTYs that can be used at any one time.
-  The default is 256, and should be enough for desktop systems. Server
-  machines which support incoming telnet/rlogin/ssh connections and/or
-  serve several X terminals may want to increase this: every incoming
-  connection and every xterm uses up one PTY.
-
-  When not in use, each additional set of 256 PTYs occupy
-  approximately 8 KB of kernel memory on 32-bit architectures.
-
-Parallel printer support
-CONFIG_PRINTER
-  If you intend to attach a printer to the parallel port of your Linux
-  box (as opposed to using a serial printer; if the connector at the
-  printer has 9 or 25 holes ["female"], then it's serial), say Y.
-  Also read the Printing-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  It is possible to share one parallel port among several devices
-  (e.g. printer and ZIP drive) and it is safe to compile the
-  corresponding drivers into the kernel.  If you want to compile this
-  driver as a module however ( = code which can be inserted in and
-  removed from the running kernel whenever you want), say M here and
-  read <file:Documentation/modules.txt> and
-  <file:Documentation/parport.txt>.  The module will be called lp.o.
-
-  If you have several parallel ports, you can specify which ports to
-  use with the "lp" kernel command line option.  (Try "man bootparam"
-  or see the documentation of your boot loader (lilo or loadlin) about
-  how to pass options to the kernel at boot time.)  The syntax of the
-  "lp" command line option can be found in <file:drivers/char/lp.c>.
-
-  If you have more than 8 printers, you need to increase the LP_NO
-  macro in lp.c and the PARPORT_MAX macro in parport.h.
-
-Support for console on line printer
-CONFIG_LP_CONSOLE
-  If you want kernel messages to be printed out as they occur, you
-  can have a console on the printer. This option adds support for
-  doing that; to actually get it to happen you need to pass the
-  option "console=lp0" to the kernel at boot time.
-
-  If the printer is out of paper (or off, or unplugged, or too
-  busy..) the kernel will stall until the printer is ready again.
-  By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
-  can make the kernel continue when this happens,
-  but it'll lose the kernel messages.
-
-  If unsure, say N.
-
-Support for user-space parallel port device drivers
-CONFIG_PPDEV
-  Saying Y to this adds support for /dev/parport device nodes.  This
-  is needed for programs that want portable access to the parallel
-  port, for instance deviceid (which displays Plug-and-Play device
-  IDs).
-
-  This is the parallel port equivalent of SCSI generic support (sg).
-  It is safe to say N to this -- it is not needed for normal printing
-  or parallel port CD-ROM/disk support.
-
-  This support is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  ppdev.o.
-
-  If unsure, say N.
-
-Cobalt Networks support
-CONFIG_COBALT
-  Support for Cobalt Networks x86-based servers.
-
-Gen III (3000 series) system support
-CONFIG_COBALT_GEN_III
-  This option enables support for the 3000 series of Cobalt Networks
-  systems. This includes the RaQ 3, RaQ 4, and Qube 3 product lines.
-
-  This platform uses an AMD K6-2 processor, an ALI M1541/1533 chipset,
-  an optional NCR 53c875 SCSI controller, and two Intel 82559ER or
-  National Semiconductor DP83815 NICs.
-
-  Getting this option wrong will likely result in a kernel that does
-  not boot. Selecting support for more than 1 system series will add
-  bloat to your kernel, but will not cause anything bad to happen.
-
-  If you have a Cobalt Networks System, but aren't sure what kind,
-  say Y here.
-
-Gen V (5000 series) system support
-CONFIG_COBALT_GEN_V
-  This option enables support for the 5000 series of Cobalt Networks
-  systems. This includes the RaQ XTR product line.
-
-  This platform uses Intel Pentium III Coppermine FCPGA CPUs, the
-  ServerWorks LE chipset (with registered ECC DIMMs only!), two
-  HighPoint HPT370 IDE controllers, and two National Semiconductor
-  DP83815 NICs.
-
-  Getting this option wrong will likely result in a kernel that does
-  not boot. Selecting support for more than 1 system series will add
-  bloat to your kernel, but will not cause anything bad to happen.
-
-  If you have a Cobalt Networks System, but aren't sure what kind,
-  say Y here.
-
-Create legacy /proc files
-CONFIG_COBALT_OLDPROC
-  This option forces some Cobalt Networks drivers to support legacy
-  files in /proc.  Older versions of these drivers exported files
-  directly in /proc, as opposed to the newer /proc/cobalt.  If you say
-  N to this option, the old filenames will no longer be exported.
-  Regardless of your selection here, files in /proc/cobalt will be
-  exported.  Of course, you have to include support for /proc fs, too.
-
-  It is safe to say Y here.
-
-Front panel LCD support
-CONFIG_COBALT_LCD
-  This enables support for the Cobalt Networks front panel.  This is
-  for the LCD panel and buttons.  The primary method for connection is
-  via the parallel port (IO base 0x370), but newer systems use an
-  I2C bus.
-
-  If you have a Cobalt Networks system, you should say Y here.
-
-Software controlled LED support
-CONFIG_COBALT_LED
-  This enables support for the software-controlled LEDs on Cobalt
-  Networks systems.  This includes the fault light and front panel
-  LEDs on the RaQ XTR, the lightbar on the Qube 3, and others.
-
-  If you have a Cobalt Networks system, you should say Y here.
-
-Silicon serial number support
-CONFIG_COBALT_SERNUM
-  This enables support for the on-board serial number on Cobalt
-  Networks systems.  This is a universally-unique 64-bit serial
-  number.  Some systems use a Dallas DS2401 chip, others have an I2C
-  based EEPROM.
-
-  If you select Y here, the files /proc/cobalt/hostid and
-  /proc/cobalt/serialnumber will be created.  The hostid file contains
-  a 32 bit integer generated from the serial number, in binary form.
-  The serialnumber file contains the hexadecimal representation of the
-  serial number, in ASCII.
-
-  If you have a Cobalt Networks system, you should say Y here.
-
-Chipset watchdog timer support
-CONFIG_COBALT_WDT
-  This enables support for the watchdog timer built into Cobalt
-  chipsets.  The timer wakes up periodically, to make find out if
-  system has hung, or disabled interrupts too long.  The result of
-  detecting a hang is a hard reboot.
-
-  If you have a Cobalt Networks system, you should say Y here.
-
-Thermal sensor support
-CONFIG_COBALT_THERMAL
-  This enables support for the thermal sensor(s) built into Cobalt
-  Networks systems.  This driver exports /proc/cobalt/thermal_sensors.
-
-  If you have a Cobalt Networks system, you should say Y here.
-
-Fan tachometer support
-CONFIG_COBALT_FANS
-  This enables support for the fan tachometers built into some Cobalt
-  Networks systems.  This driver exports /proc/cobalt/faninfo.  Some
-  Cobalt software depends on this feature, and enabling it does not
-  cause any risks.
-
-  If you have a Cobalt Networks system, you should say Y here, unless
-  you are absolutely sure.
-
-Disk drive ruler support
-CONFIG_COBALT_RULER
-  This enables support for the cobalt hard drive ruler, found on some
-  Cobalt systems, including the RaQ XTR.  This is the device that
-  enables swapping of drives.  It is not needed for basic disk
-  operation. Enabling this on a system with no ruler will have no
-  adverse effects.
-
-  If you have a Cobalt Networks system, you should say Y here,
-  unless you are absolutely sure.
-
-I2C support
-CONFIG_I2C
-  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
-  many micro controller applications and developed by Philips.  SMBus,
-  or System Management Bus is a subset of the I2C protocol.  More
-  information is contained in the directory <file:Documentation/i2c/>,
-  especially in the file called "summary" there.
-
-  Both I2C and SMBus are supported here. You will need this for
-  hardware sensors support, and also for Video For Linux support.
-  Specifically, if you want to use a BT848 based frame grabber/overlay
-  boards under Linux, say Y here and also to "I2C bit-banging
-  interfaces", below.
-
-  If you want I2C support, you should say Y here and also to the
-  specific driver for your bus adapter(s) below.  If you say Y to
-  "/proc file system" below, you will then get a /proc interface which
-  is documented in <file:Documentation/i2c/proc-interface>.
-
-  This I2C support is also available as a module.  If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-core.o.
-
-UltraSPARC-III bootbus i2c controller driver
-CONFIG_BBC_I2C
-  The BBC devices on the UltraSPARC III have two I2C controllers.  The
-  first I2C controller connects mainly to configuration PROMs (NVRAM,
-  CPU configuration, DIMM types, etc.).  The second I2C controller
-  connects to environmental control devices such as fans and
-  temperature sensors.  The second controller also connects to the
-  smartcard reader, if present.  Say Y to enable support for these.
-
-I2C bit-banging interfaces
-CONFIG_I2C_ALGOBIT
-  This allows you to use a range of I2C adapters called bit-banging
-  adapters.  Say Y if you own an I2C adapter belonging to this class
-  and then say Y to the specific driver for you adapter below.
-
-  This support is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-algo-bit.o.
-
-Philips style parallel port adapter
-CONFIG_I2C_PHILIPSPAR
-  This supports parallel-port I2C adapters made by Philips.  Say Y if
-  you own such an adapter.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-philips-par.o.
-
-  Note that if you want support for different parallel port devices,
-  life will be much easier if you compile them all as modules.
-
-ELV adapter
-CONFIG_I2C_ELV
-  This supports parallel-port I2C adapters called ELV.  Say Y if you
-  own such an adapter.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-elv.o.
-
-Velleman K9000 adapter
-CONFIG_I2C_VELLEMAN
-  This supports the Velleman K9000 parallel-port I2C adapter.  Say Y
-  if you own such an adapter.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-velleman.o.
-
-I2C PCF 8584 interfaces
-CONFIG_I2C_ALGOPCF
-  This allows you to use a range of I2C adapters called PCF adapters.
-  Say Y if you own an I2C adapter belonging to this class and then say
-  Y to the specific driver for you adapter below.
-
-  This support is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-algo-pcf.o.
-
-Elektor ISA card
-CONFIG_I2C_ELEKTOR
-  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
-  such an adapter.
-
-  This driver is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-elektor.o.
-
-I2C device interface
-CONFIG_I2C_CHARDEV
-  Say Y here to use i2c-* device files, usually found in the /dev
-  directory on your system.  They make it possible to have user-space
-  programs use the I2C bus.  Information on how to do this is
-  contained in the file <file:Documentation/i2c/dev-interface>.
-
-  This code is also available as a module.  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called i2c-dev.o.
-
-I2C /proc support
-CONFIG_I2C_PROC
-  This provides support for i2c device entries in the /proc filesystem.
-  The entries will be found in /proc/sys/dev/sensors.
-
-  This code is also available as a module. If you want to compile
-  it as a module, say M here and read <file:Documentation/modules.txt>.
-  The module will be called i2c-proc.o.
-
-Bus Mouse Support
-CONFIG_BUSMOUSE
-  Say Y here if your machine has a bus mouse as opposed to a serial
-  mouse. Most people have a regular serial MouseSystem or
-  Microsoft mouse (made by Logitech) that plugs into a COM port
-  (rectangular with 9 or 25 pins). These people say N here. 
-
-  If you have a laptop, you either have to check the documentation or
-  experiment a bit to find out whether the trackball is a serial mouse
-  or not; it's best to say Y here for you.
-
-  This is the generic bus mouse driver code. If you have a bus mouse,
-  you will have to say Y here and also to the specific driver for your
-  mouse below.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called busmouse.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Mouse Support (not serial and bus mice)
-CONFIG_MOUSE
-  This is for machines with a mouse which is neither a serial nor a
-  bus mouse. Examples are PS/2 mice (such as the track balls on some
-  laptops) and some digitizer pads. Most people have a regular serial
-  MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
-  COM port (rectangular with 9 or 25 pins). These people say N here.
-  If you have something else, read the Busmouse-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
-  information about all non-serial mice, not just bus mice.
-
-  If you have a laptop, you either have to check the documentation or
-  experiment a bit to find out whether the trackball is a serial mouse
-  or not; it's best to say Y here for you.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about non-serial mice. If unsure, say Y.
-
-Logitech busmouse support
-CONFIG_LOGIBUSMOUSE
-  Logitech mouse connected to a proprietary interface card.  It's
-  generally a round connector with 9 pins. Note that the newer mice
-  made by Logitech don't use the Logitech protocol anymore; for those,
-  you don't need this option.  You want to read the Busmouse-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called busmouse.o.  If you are unsure, say N and read the
-  HOWTO nevertheless: it will tell you what you have.
-
-PS/2 mouse (aka "auxiliary device") support
-CONFIG_PSMOUSE
-  The PS/2 mouse connects to a special mouse port that looks much like
-  the keyboard port (small circular connector with 6 pins). This way,
-  the mouse does not use any serial ports. This port can also be used
-  for other input devices like light pens, tablets, keypads. Compaq,
-  AST and IBM all use this as their mouse port on currently shipping
-  machines. The trackballs of some laptops are PS/2 mice also. In
-  particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse.
-
-  Although PS/2 mice are not technically bus mice, they are explained
-  in detail in the Busmouse-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  When using a PS/2 mouse, you can get problems if you want to use the
-  mouse both on the Linux console and under X. Using the "-R" option
-  of the Linux mouse managing program gpm (available from
-  <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
-  the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
-
-C&T 82C710 mouse port support (as on TI Travelmate)
-CONFIG_82C710_MOUSE
-  This is a certain kind of PS/2 mouse used on the TI Travelmate. If
-  you are unsure, try first to say N here and come back if the mouse
-  doesn't work. Read the Busmouse-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-PC110 digitizer pad support
-CONFIG_PC110_PAD
-  This drives the digitizer pad on the IBM PC110 palmtop.  It can turn
-  the digitizer pad into a PS/2 mouse emulation with tap gestures or
-  into an absolute pad.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called pc110pad.o.
-
-Microsoft busmouse support
-CONFIG_MS_BUSMOUSE
-  These animals (also called Inport mice) are connected to an
-  expansion board using a round connector with 9 pins. If this is what
-  you have, say Y and read the Busmouse-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you are unsure, say N and read the HOWTO nevertheless: it will
-  tell you what you have. Also be aware that several vendors talk
-  about 'Microsoft busmouse' and actually mean PS/2 busmouse -- so
-  count the pins on the connector.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called msbusmouse.o.
-
-Apple Desktop Bus mouse support
-CONFIG_ADBMOUSE
-  Say Y here if you have this type of bus mouse (4 pin connector) as
-  is common on Macintoshes.  You may want to read the Busmouse-HOWTO,
-  available from <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called adbmouse.o.
-
-ATIXL busmouse support
-CONFIG_ATIXL_BUSMOUSE
-  This is a rare type of busmouse that is connected to the back of an
-  ATI video card.  Say Y if you have one of those. Note however that
-  most mice by ATI are actually Microsoft busmice; you should say Y to
-  "Microsoft busmouse support" above if you have one of those.  Read
-  the Busmouse-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called atixlmouse.o.
-
-  If you are unsure, say N and read the HOWTO nevertheless: it will
-  tell you what you have.
-
-QIC-02 tape support
-CONFIG_QIC02_TAPE
-  If you have a non-SCSI tape drive like that, say Y. Or, if you want
-  to compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>. The module will be called
-  tpqic02.o.
-
-iSeries Virtual Tape Support
-CONFIG_VIOTAPE
-  If you are running Linux on an iSeries system and you want Linux
-  to read and/or write a tape drive owned by OS/400, say Y here.
-
-Do you want runtime configuration for QIC-02
-CONFIG_QIC02_DYNCONF
-  You can either configure this driver once and for all by editing a
-  header file (<file:include/linux/tpqic02.h>), in which case you
-  should say N, or you can fetch a program via anonymous FTP which is
-  able to configure this driver during runtime.  The program to do
-  this is called 'qic02conf' and it is part of the
-  tpqic02-support-X.Y.tar.gz support package.
-
-  If you want to use the qic02conf program, say Y.
-
-Floppy tape drive (QIC-80/40/3010/3020/TR-1/TR-2/TR-3) support
-CONFIG_FTAPE
-  If you have a tape drive that is connected to your floppy
-  controller, say Y here.
-
-  Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
-  "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
-  controller of their own. These drives (and their companion
-  controllers) are also supported if you say Y here.
-
-  If you have a special controller (such as the CMS FC-10, FC-20,
-  Mountain Mach-II, or any controller that is based on the Intel 82078
-  FDC like the high speed controllers by Seagate and Exabyte and
-  Iomega's "Ditto Dash") you must configure it by selecting the
-  appropriate entries from the "Floppy tape controllers" sub-menu
-  below and possibly modify the default values for the IRQ and DMA
-  channel and the IO base in ftape's configuration menu.
-
-  If you want to use your floppy tape drive on a PCI-bus based system,
-  please read the file <file:drivers/char/ftape/README.PCI>.
-
-  The ftape kernel driver is also available as a runtime loadable
-  module ( = code which can be inserted in and removed from the
-  running kernel whenever you want). If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>. The
-  module will be called ftape.o.
-
-  Note that the Ftape-HOWTO is out of date (sorry) and documents the
-  older version 2.08 of this software but still contains useful
-  information.  There is a web page with more recent documentation at
-  <http://www.instmath.rwth-aachen.de/~heine/ftape/>.  This page
-  always contains the latest release of the ftape driver and useful
-  information (backup software, ftape related patches and
-  documentation, FAQ).  Note that the file system interface has
-  changed quite a bit compared to previous versions of ftape.  Please
-  read <file:Documentation/ftape.txt>.
-
-VFS interface for ftape
-CONFIG_ZFTAPE
-  Normally, you want to say Y or M. DON'T say N here or you
-  WON'T BE ABLE TO USE YOUR FLOPPY TAPE DRIVE.
-
-  The ftape module itself no longer contains the routines necessary
-  to interface with the kernel VFS layer (i.e. to actually write data
-  to and read data from the tape drive).  Instead the file system
-  interface (i.e. the hardware independent part of the driver) has
-  been moved to a separate module.
-
-  If you say M zftape will be compiled as a runtime loadable
-  module ( = code which can be inserted in and removed from the
-  running kernel whenever you want).  In this case you should read
-  <file:Documentation/modules.txt>.  The module will be called
-  zftape.o.
-
-  Regardless of whether you say Y or M here, an additional runtime
-  loadable module called `zft-compressor.o' which contains code to
-  support user transparent on-the-fly compression based on Ross
-  William's lzrw3 algorithm will be produced.  If you have enabled the
-  kernel module loader (i.e. have said Y to "Kernel module loader
-  support", above) then `zft-compressor.o' will be loaded
-  automatically by zftape when needed.
-
-  Despite its name, zftape does NOT use compression by default.  The
-  file <file:Documentation/ftape.txt> contains a short description of
-  the most important changes in the file system interface compared to
-  previous versions of ftape.  The ftape home page
-  <http://www.instmath.rwth-aachen.de/~heine/ftape/> contains
-  further information.
-
-  IMPORTANT NOTE: zftape can read archives created by previous
-  versions of ftape and provide file mark support (i.e. fast skipping
-  between tape archives) but previous version of ftape will lack file
-  mark support when reading archives produced by zftape.
-
-Default block size for zftape
-CONFIG_ZFT_DFLT_BLK_SZ
-  If unsure leave this at its default value, i.e. 10240. Note that
-  you specify only the default block size here. The block size can be
-  changed at run time using the MTSETBLK tape operation with the
-  MTIOCTOP ioctl (i.e. with "mt -f /dev/qft0 setblk #BLKSZ" from the
-  shell command line).
-
-  The probably most striking difference between zftape and previous
-  versions of ftape is the fact that all data must be written or read
-  in multiples of a fixed block size. The block size defaults to
-  10240 which is what GNU tar uses. The values for the block size
-  should be either 1 or multiples of 1024 up to a maximum value of
-  63488 (i.e. 62 K). If you specify `1' then zftape's builtin
-  compression will be disabled.
-
-  Reasonable values are `10240' (GNU tar's default block size),
-  `5120' (afio's default block size), `32768' (default block size some
-  backup programs assume for SCSI tape drives) or `1' (no restriction
-  on block size, but disables builtin compression).
-
-Number of DMA buffers
-CONFIG_FT_NR_BUFFERS
-  Please leave this at `3' unless you REALLY know what you are doing.
-  It is not necessary to change this value. Values below 3 make the
-  proper use of ftape impossible, values greater than 3 are a waste of
-  memory. You can change the amount of DMA memory used by ftape at
-  runtime with "mt -f /dev/qft0 setdrvbuffer #NUMBUFFERS". Each buffer
-  wastes 32 KB of memory. Please note that this memory cannot be
-  swapped out.
-
-Enable procfs status report (+2kb)
-CONFIG_FT_PROC_FS
-  Optional. Saying Y will result in creation of a directory
-  `/proc/ftape' under the /proc file system. The files can be viewed
-  with your favorite pager (i.e. use "more /proc/ftape/history" or
-  "less /proc/ftape/history" or simply "cat /proc/ftape/history"). The
-  file will contain some status information about the inserted
-  cartridge, the kernel driver, your tape drive, the floppy disk
-  controller and the error history for the most recent use of the
-  kernel driver. Saying Y will enlarge the size of the ftape driver
-  by approximately 2 KB.
-
-  WARNING: When compiling ftape as a module (i.e. saying M to "Floppy
-  tape drive") it is dangerous to use ftape's /proc file system
-  interface. Accessing `/proc/ftape' while the module is unloaded will
-  result in a kernel Oops. This cannot be fixed from inside ftape.
-
-# Choice: ftdebug
-Controlling the amount of debugging output of ftape
-CONFIG_FT_NORMAL_DEBUG
-  This option controls the amount of debugging output the ftape driver
-  is ABLE to produce; it does not increase or diminish the debugging
-  level itself. If unsure, leave this at its default setting,
-  i.e. choose "Normal".
-
-  Ftape can print lots of debugging messages to the system console
-  resp. kernel log files. Reducing the amount of possible debugging
-  output reduces the size of the kernel module by some KB, so it might
-  be a good idea to use "None" for emergency boot floppies.
-
-  If you want to save memory then the following strategy is
-  recommended: leave this option at its default setting "Normal" until
-  you know that the driver works as expected, afterwards reconfigure
-  the kernel, this time specifying "Reduced" or "None" and recompile
-  and install the kernel as usual. Note that choosing "Excessive"
-  debugging output does not increase the amount of debugging output
-  printed to the console but only makes it possible to produce
-  "Excessive" debugging output.
-
-  Please read <file:Documentation/ftape.txt> for a short description
-  how to control the amount of debugging output.
-
-Excessive
-CONFIG_FT_FULL_DEBUG
-  Extremely verbose output for driver debugging purposes.
-
-Reduced
-CONFIG_FT_NO_TRACE
-  Reduced tape driver debugging output.
-
-None
-CONFIG_FT_NO_TRACE_AT_ALL
-  Suppress all debugging output from the tape drive.
-
-# Choice: ftcontroller
-The floppy drive controller for ftape
-CONFIG_FT_STD_FDC
-  Only change this setting if you have a special controller. If you
-  didn't plug any add-on card into your computer system but just
-  plugged the floppy tape cable into the already existing floppy drive
-  controller then you don't want to change the default setting,
-  i.e. choose "Standard".
-
-  Choose "MACH-2" if you have a Mountain Mach-2 controller.
-  Choose "FC-10/FC-20" if you have a Colorado FC-10 or FC-20
-  controller.
-  Choose "Alt/82078" if you have another controller that is located at
-  an IO base address different from the standard floppy drive
-  controller's base address of `0x3f0', or uses an IRQ (interrupt)
-  channel different from `6', or a DMA channel different from
-  `2'. This is necessary for any controller card that is based on
-  Intel's 82078 FDC such as Seagate's, Exabyte's and Iomega's "high
-  speed" controllers.
-
-  If you choose something other than "Standard" then please make
-  sure that the settings for the IO base address and the IRQ and DMA
-  channel in the configuration menus below are correct. Use the manual
-  of your tape drive to determine the correct settings!
-
-  If you are already successfully using your tape drive with another
-  operating system then you definitely should use the same settings
-  for the IO base, the IRQ and DMA channel that have proven to work
-  with that other OS.
-
-  Note that this menu lets you specify only the default setting for
-  the hardware setup. The hardware configuration can be changed at
-  boot time (when ftape is compiled into the kernel, i.e. if you
-  have said Y to "Floppy tape drive") or module load time (i.e. if you
-  have said M to "Floppy tape drive").
-
-  Please read also the file <file:Documentation/ftape.txt> which
-  contains a short description of the parameters that can be set at
-  boot or load time. If you want to use your floppy tape drive on a
-  PCI-bus based system, please read the file
-  <file:drivers/char/ftape/README.PCI>.
-
-IO base for the floppy disk controller used with Ftape
-CONFIG_FT_FDC_BASE
-  You don't need to specify a value if the following default
-  settings for the base IO address are correct:
-  <<< MACH-2     : 0x1E0 >>>
-  <<< FC-10/FC-20: 0x180 >>>
-  <<< Secondary  : 0x370 >>>
-  Secondary refers to a secondary FDC controller like the "high speed"
-  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
-  Please make sure that the setting for the IO base address
-  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
-  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
-  successfully using the tape drive with another operating system then
-  you definitely should use the same settings for the IO base that has
-  proven to work with that other OS.
-
-  Note that this menu lets you specify only the default setting for
-  the IO base. The hardware configuration can be changed at boot time
-  (when ftape is compiled into the kernel, i.e. if you specified Y to
-  "Floppy tape drive") or module load time (i.e. if you have said M to
-  "Floppy tape drive").
-
-  Please read also the file <file:Documentation/ftape.txt> which
-  contains a short description of the parameters that can be set at
-  boot or load time.
-
-IRQ channel for the floppy disk controller used with Ftape
-CONFIG_FT_FDC_IRQ
-  You don't need to specify a value if the following default
-  settings for the interrupt channel are correct:
-  <<< MACH-2     : 6 >>>
-  <<< FC-10/FC-20: 9 >>>
-  <<< Secondary  : 6 >>>
-  Secondary refers to secondary a FDC controller like the "high speed"
-  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
-  Please make sure that the setting for the IO base address
-  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
-  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
-  successfully using the tape drive with another operating system then
-  you definitely should use the same settings for the IO base that has
-  proven to work with that other OS.
-
-  Note that this menu lets you specify only the default setting for
-  the IRQ channel. The hardware configuration can be changed at boot
-  time (when ftape is compiled into the kernel, i.e. if you said Y to
-  "Floppy tape drive") or module load time (i.e. if you said M to
-  "Floppy tape drive").
-
-  Please read also the file <file:Documentation/ftape.txt> which
-  contains a short description of the parameters that can be set at
-  boot or load time.
-
-DMA channel for the floppy disk controller used with Ftape
-CONFIG_FT_FDC_DMA
-  You don't need to specify a value if the following default
-  settings for the DMA channel are correct:
-  <<< MACH-2     : 2 >>>
-  <<< FC-10/FC-20: 3 >>>
-  <<< Secondary  : 2 >>>
-  Secondary refers to a secondary FDC controller like the "high speed"
-  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
-  Please make sure that the setting for the IO base address
-  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
-  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
-  successfully using the tape drive with another operating system then
-  you definitely should use the same settings for the IO base that has
-  proven to work with that other OS.
-
-  Note that this menu lets you specify only the default setting for
-  the DMA channel. The hardware configuration can be changed at boot
-  time (when ftape is compiled into the kernel, i.e. if you said Y to
-  "Floppy tape drive") or module load time (i.e. if you said M to
-  "Floppy tape drive").
-
-  Please read also the file <file:Documentation/ftape.txt> which
-  contains a short description of the parameters that can be set at
-  boot or load time.
-
-FDC FIFO Threshold before requesting DMA service
-CONFIG_FT_FDC_THR
-  Set the FIFO threshold of the FDC. If this is higher the DMA
-  controller may serve the FDC after a higher latency time. If this is
-  lower, fewer DMA transfers occur leading to less bus contention.
-  You may try to tune this if ftape annoys you with "reduced data
-  rate because of excessive overrun errors" messages. However, this
-  doesn't seem to have too much effect.
-
-  If unsure, don't touch the initial value, i.e. leave it at "8".
-
-FDC maximum data rate
-CONFIG_FT_FDC_MAX_RATE
-  With some motherboard/FDC combinations ftape will not be able to
-  run your FDC/tape drive combination at the highest available
-  speed. If this is the case you'll encounter "reduced data rate
-  because of excessive overrun errors" messages and lots of retries
-  before ftape finally decides to reduce the data rate.
-
-  In this case it might be desirable to tell ftape beforehand that
-  it need not try to run the tape drive at the highest available
-  speed. If unsure, leave this disabled, i.e. leave it at 2000
-  bits/sec.
-
-Direct Rendering Manager (XFree86 DRI support)
-CONFIG_DRM
-  Kernel-level support for the Direct Rendering Infrastructure (DRI)
-  introduced in XFree86 4.0. If you say Y here, you need to select
-  the module that's right for your graphics card from the list below.
-  These modules provide support for synchronization, security, and
-  DMA transfers. Please see <http://dri.sourceforge.net/> for more
-  details.  You should also select and configure AGP
-  (/dev/agpgart) support.
-
-Build drivers for new (XFree 4.1) DRM
-CONFIG_DRM_NEW
-  If you set this option, the new DRM version needed by XFree86 4.1
-  will be used.  Otherwise, the old DRM version will be used,
-  appropriate for XFree86 4.0.
-
-3dfx Banshee/Voodoo3+
-CONFIG_DRM_TDFX
-  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
-  graphics card.  If M is selected, the module will be called tdfx.o.
-
-3dlabs GMX 2000
-CONFIG_DRM_GAMMA
-  Choose this option if you have a 3dlabs GMX 2000 graphics card.
-  If M is selected, the module will be called gamma.o.
-
-ATI Rage 128
-CONFIG_DRM_R128
-  Choose this option if you have an ATI Rage 128 graphics card.  If M
-  is selected, the module will be called r128.o.  AGP support for
-  this card is strongly suggested (unless you have a PCI version).
-
-ATI Radeon
-CONFIG_DRM_RADEON
-  Choose this option if you have an ATI Radeon graphics card.  There
-  are both PCI and AGP versions.  You don't need to choose this to
-  run the Radeon in plain VGA mode.  There is a product page at
-  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-  If M is selected, the module will be called radeon.o.
-
-Intel I810
-CONFIG_DRM_I810
-  Choose this option if you have an Intel I810 graphics card.  If M is
-  selected, the module will be called i810.o.  AGP support is required
-  for this driver to work.
-
-Matrox G200/G400/G450
-CONFIG_DRM_MGA
-  Choose this option if you have a Matrox G200, G400 or G450 graphics
-  card.  If M is selected, the module will be called mga.o.  AGP
-  support is required for this driver to work.
-
-3dfx Banshee/Voodoo3+
-CONFIG_DRM40_TDFX
-  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
-  graphics card.  If M is selected, the module will be called tdfx.o.
-
-3dlabs GMX 2000
-CONFIG_DRM40_GAMMA
-  Choose this option if you have a 3dlabs GMX 2000 graphics card.
-  If M is selected, the module will be called gamma.o.
-
-ATI Rage 128
-CONFIG_DRM40_R128
-  Choose this option if you have an ATI Rage 128 graphics card.  If M
-  is selected, the module will be called r128.o.  AGP support for
-  this card is strongly suggested (unless you have a PCI version).
-
-ATI Radeon
-CONFIG_DRM40_RADEON
-  Choose this option if you have an ATI Radeon graphics card.  There
-  are both PCI and AGP versions.  You don't need to choose this to
-  run the Radeon in plain VGA mode.  There is a product page at
-  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-  If M is selected, the module will be called radeon.o.
-
-Intel I810
-CONFIG_DRM40_I810
-  Choose this option if you have an Intel I810 graphics card.  If M is
-  selected, the module will be called i810.o.  AGP support is required
-  for this driver to work.
-
-Matrox G200/G400/G450
-CONFIG_DRM40_MGA
-  Choose this option if you have a Matrox G200, G400 or G450 graphics
-  card.  If M is selected, the module will be called mga.o.  AGP
-  support is required for this driver to work.
-
-Creator/Creator3D/Elite3D
-CONFIG_DRM_FFB
-  Choose this option if you have one of Sun's Creator3D-based graphics
-  and frame buffer cards.  Product page at
-  <http://www.sun.com/desktop/products/Graphics/creator3d.html>.
-
-MTRR (Memory Type Range Register) support
-CONFIG_MTRR
-  On Intel P6 family processors (Pentium Pro, Pentium II and later)
-  the Memory Type Range Registers (MTRRs) may be used to control
-  processor access to memory ranges. This is most useful if you have
-  a video (VGA) card on a PCI or AGP bus. Enabling write-combining
-  allows bus write transfers to be combined into a larger transfer
-  before bursting over the PCI/AGP bus. This can increase performance
-  of image write operations 2.5 times or more. Saying Y here creates a
-  /proc/mtrr file which may be used to manipulate your processor's
-  MTRRs. Typically the X server should use this.
-
-  This code has a reasonably generic interface so that similar
-  control registers on other processors can be easily supported
-  as well:
-
-  The Cyrix 6x86, 6x86MX and M II processors have Address Range
-  Registers (ARRs) which provide a similar functionality to MTRRs. For
-  these, the ARRs are used to emulate the MTRRs.
-  The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
-  MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
-  write-combining. All of these processors are supported by this code
-  and it makes sense to say Y here if you have one of them.
-
-  Saying Y here also fixes a problem with buggy SMP BIOSes which only
-  set the MTRRs for the boot CPU and not for the secondary CPUs. This
-  can lead to all sorts of problems, so it's good to say Y here.
-
-  You can safely say Y even if your machine doesn't have MTRRs, you'll
-  just add about 9 KB to your kernel.
-
-  See <file:Documentation/mtrr.txt> for more information.
-
-CPU clock frequency of your DEC Alpha
-CONFIG_FT_ALPHA_CLOCK
-  On some DEC Alpha machines the CPU clock frequency cannot be
-  determined automatically, so you need to specify it here ONLY if
-  running a DEC Alpha, otherwise this setting has no effect.
-
-Double Talk PC internal speech card support
-CONFIG_DTLK
-  This driver is for the DoubleTalk PC, a speech synthesizer
-  manufactured by RC Systems (<http://www.rcsys.com/>).  It is also
-  called the `internal DoubleTalk'.  If you want to compile this as a
-  module ( = code which can be inserted in and removed from the
-  running kernel whenever you want), say M here and read
-  <file:Documentation/modules.txt>. The module will be called dtlk.o.
-
-Siemens R3964 serial protocol support
-CONFIG_R3964
-  This driver allows synchronous communication with devices using the
-  Siemens R3964 packet protocol. Unless you are dealing with special
-  hardware like PLCs, you are unlikely to need this.
-
-  To compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>. The module will be called
-  n_r3964.o.
-
-  If unsure, say N.
-
-Applicom intelligent fieldbus card support
-CONFIG_APPLICOM
-  This driver provides the kernel-side support for the intelligent
-  fieldbus cards made by Applicom International. More information
-  about these cards can be found on the WWW at the address
-  <http://www.applicom-int.com/>, or by email from David Woodhouse
-  <dwmw2@infradead.org>.
-
-  To compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>. The module will be called
-  applicom.o.
-
-  If unsure, say N.
-
-Sony Vaio Programmable I/O Control Device support
-CONFIG_SONYPI
-  This driver enables access to the Sony Programmable I/O Control
-  Device which can be found in many (all ?) Sony Vaio laptops.
-
-  If you have one of those laptops, read
-  <file:Documentation/sonypi.txt>, and say Y or M here.
-
-  If you want to compile the driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called sonypi.o.
-
-Intel Random Number Generator support
-CONFIG_INTEL_RNG
-  This driver provides kernel-side support for the Random Number
-  Generator hardware found on Intel i8xx-based motherboards.
-
-  Both a character driver, used to read() entropy data, and a timer
-  function which automatically adds entropy directly into the
-  kernel pool, are exported by this driver.
-
-  To compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>. The module will be called
-  i810_rng.o.
-
-  If unsure, say N.
-
-Power Management support
-CONFIG_PM
-  "Power Management" means that parts of your computer are shut
-  off or put into a power conserving "sleep" mode if they are not
-  being used.  There are two competing standards for doing this: APM
-  and ACPI.  If you want to use either one, say Y here and then also
-  to the requisite support below.
-
-  Power Management is most important for battery powered laptop
-  computers; if you have a laptop, check out the Linux Laptop home
-  page on the WWW at
-  <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
-  Battery Powered Linux mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  Note that, even if you say N here, Linux on the x86 architecture
-  will issue the hlt instruction if nothing is to be done, thereby
-  sending the processor to sleep and saving power.
-
-ACPI support
-CONFIG_ACPI
-  ACPI/OSPM support for Linux is currently under development. As such,
-  this support is preliminary and EXPERIMENTAL.  Configuring ACPI
-  support enables kernel interfaces that allow higher level software
-  (OSPM) to manipulate ACPI defined hardware and software interfaces,
-  including the evaluation of ACPI control methods.  If unsure, choose
-  N here.  Note, this option will enlarge your kernel by about 120K.
-
-  This support requires an ACPI compliant platform (hardware/firmware).
-  If both ACPI and Advanced Power Management (APM) support are
-  configured, whichever is loaded first shall be used.
-
-  This code DOES NOT currently provide a complete OSPM implementation
-  -- it has not yet reached APM's level of functionality.  When fully
-  implemented, Linux ACPI/OSPM will provide a more robust functional
-  replacement for legacy configuration and power management
-  interfaces, including the Plug-and-Play BIOS specification (PnP
-  BIOS), the Multi-Processor Specification (MPS), and the Advanced
-  Power Management specification (APM).
-
-  Linux support for ACPI/OSPM is based on Intel Corporation's ACPI
-  Component Architecture (ACPI CA). The latest ACPI CA source code,
-  documentation, debug builds, and implementation status information
-  can be downloaded from:
-  <http://developer.intel.com/technology/iapc/acpi/downloads.htm>.
-
-  The ACPI Sourceforge project may also be of interest:
-  <http://sf.net/projects/acpi/>
-
-Enable ACPI 2.0 with errata 1.3
-CONFIG_ACPI20
-  Enable support for the 2.0 version of the ACPI interpreter.  See the
-  help for ACPI for caveats and discussion.
-
-ACPI kernel configuration manager
-CONFIG_ACPI_KERNEL_CONFIG
-  If you say `Y' here, Linux's ACPI support will use the
-  hardware-level system descriptions found on IA64 machines.
-
-ACPI Debug Statements
-CONFIG_ACPI_DEBUG
-  The ACPI driver can optionally report errors with a great deal
-  of verbosity. Saying Y enables these statements. This will increase
-  your kernel size by around 50K.
-
-ACPI Bus Manager
-CONFIG_ACPI_BUSMGR
-  The ACPI Bus Manager enumerates devices in the ACPI namespace, and
-  handles PnP messages.  All ACPI devices use its services, so using
-  them requires saying Y here.
-
-ACPI System Driver
-CONFIG_ACPI_SYS
-  This driver will enable your system to shut down using ACPI, and
-  dump your ACPI DSDT table using /proc/acpi/dsdt.
-
-ACPI Processor Driver
-CONFIG_ACPI_CPU
-  This driver installs ACPI as the idle handler for Linux, and uses
-  ACPI C2 and C3 processor states to save power, on systems that
-  support it.
-
-ACPI Button
-CONFIG_ACPI_BUTTON
-  This driver registers for events based on buttons, such as the
-  power, sleep, and lid switch.  In the future, a daemon will read
-  /proc/acpi/event and perform user-defined actions such as shutting
-  down the system.  Until then, you can cat it, and see output when
-  a button is pressed.
-
-ACPI AC Adapter
-CONFIG_ACPI_AC
-  This driver adds support for the AC Adapter object, which indicates
-  whether a system is on AC, or not.  Typically, only laptops have
-  this object, since desktops are always on AC.
-
-ACPI Embedded Controller
-CONFIG_ACPI_EC
-  This driver is required on some systems for the proper operation of
-  the battery and thermal drivers.  If you are compiling for a laptop,
-  say Y.
-
-ACPI Control Method Battery
-CONFIG_ACPI_CMBATT
-  This driver adds support for battery information through
-  /proc/acpi/battery. If you have a laptop with a battery, say Y.
-
-ACPI Thermal
-CONFIG_ACPI_THERMAL
-  This driver handles overheating conditions on laptops. It is HIGHLY
-  recommended, as your laptop CPU may be damaged without it.
-
-Advanced Power Management BIOS support
-CONFIG_APM
-  APM is a BIOS specification for saving power using several different
-  techniques. This is mostly useful for battery powered laptops with
-  APM compliant BIOSes. If you say Y here, the system time will be
-  reset after a RESUME operation, the /proc/apm device will provide
-  battery status information, and user-space programs will receive
-  notification of APM "events" (e.g. battery status change).
-
-  If you select "Y" here, you can disable actual use of the APM
-  BIOS by passing the "apm=off" option to the kernel at boot time.
-
-  Note that the APM support is almost completely disabled for
-  machines with more than one CPU.
-
-  In order to use APM, you will need supporting software. For location
-  and more information, read <file:Documentation/pm.txt> and the
-  Battery Powered Linux mini-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  This driver does not spin down disk drives (see the hdparm(8)
-  manpage ("man 8 hdparm") for that), and it doesn't turn off
-  VESA-compliant "green" monitors.
-
-  This driver does not support the TI 4000M TravelMate and the ACER
-  486/DX4/75 because they don't have compliant BIOSes. Many "green"
-  desktop machines also don't have compliant BIOSes, and this driver
-  may cause those machines to panic during the boot phase.
-
-  Generally, if you don't have a battery in your machine, there isn't
-  much point in using this driver and you should say N. If you get
-  random kernel OOPSes or reboots that don't seem to be related to
-  anything, try disabling/enabling this option (or disabling/enabling
-  APM in your BIOS).
-
-  Some other things you should try when experiencing seemingly random,
-  "weird" problems:
-
-   1) make sure that you have enough swap space and that it is
-      enabled.
-   2) pass the "no-hlt" option to the kernel
-   3) switch on floating point emulation in the kernel and pass
-      the "no387" option to the kernel
-   4) pass the "floppy=nodma" option to the kernel
-   5) pass the "mem=4M" option to the kernel (thereby disabling
-      all but the first 4 MB of RAM)
-   6) make sure that the CPU is not over clocked.
-   7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-   8) disable the cache from your BIOS settings
-   9) install a fan for the video card or exchange video RAM
-   10) install a better fan for the CPU
-   11) exchange RAM chips
-   12) exchange the motherboard.
-
-  To compile this driver as a module ( = code which can be inserted in
-  and removed from the running kernel whenever you want), say M here
-  and read <file:Documentation/modules.txt>. The module will be called
-  apm.o.
-
-Ignore USER SUSPEND
-CONFIG_APM_IGNORE_USER_SUSPEND
-  This option will ignore USER SUSPEND requests. On machines with a
-  compliant APM BIOS, you want to say N. However, on the NEC Versa M
-  series notebooks, it is necessary to say Y because of a BIOS bug.
-
-Enable APM at boot time
-CONFIG_APM_DO_ENABLE
-  Enable APM features at boot time. From page 36 of the APM BIOS
-  specification: "When disabled, the APM BIOS does not automatically
-  power manage devices, enter the Standby State, enter the Suspend
-  State, or take power saving steps in response to CPU Idle calls."
-  This driver will make CPU Idle calls when Linux is idle (unless this
-  feature is turned off -- see "Do CPU IDLE calls", below). This
-  should always save battery power, but more complicated APM features
-  will be dependent on your BIOS implementation. You may need to turn
-  this option off if your computer hangs at boot time when using APM
-  support, or if it beeps continuously instead of suspending. Turn
-  this off if you have a NEC UltraLite Versa 33/C or a Toshiba
-  T400CDT. This is off by default since most machines do fine without
-  this feature.
-
-Make CPU Idle calls when idle
-CONFIG_APM_CPU_IDLE
-  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
-  On some machines, this can activate improved power savings, such as
-  a slowed CPU clock rate, when the machine is idle. These idle calls
-  are made after the idle loop has run for some length of time (e.g.,
-  333 mS). On some machines, this will cause a hang at boot time or
-  whenever the CPU becomes idle. (On machines with more than one CPU,
-  this option does nothing.)
-
-Enable console blanking using APM
-CONFIG_APM_DISPLAY_BLANK
-  Enable console blanking using the APM. Some laptops can use this to
-  turn off the LCD backlight when the screen blanker of the Linux
-  virtual console blanks the screen. Note that this is only used by
-  the virtual console screen blanker, and won't turn off the backlight
-  when using the X Window system. This also doesn't have anything to
-  do with your VESA-compliant power-saving monitor. Further, this
-  option doesn't work for all laptops -- it might not turn off your
-  backlight at all, or it might print a lot of errors to the console,
-  especially if you are using gpm.
-
-RTC stores time in GMT
-CONFIG_APM_RTC_IS_GMT
-  Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
-  stores the time in GMT (Greenwich Mean Time). Say N if your RTC
-  stores localtime.
-
-  It is in fact recommended to store GMT in your RTC, because then you
-  don't have to worry about daylight savings time changes. The only
-  reason not to use GMT in your RTC is if you also run a broken OS
-  that doesn't understand GMT.
-
-Allow interrupts during APM BIOS calls
-CONFIG_APM_ALLOW_INTS
-  Normally we disable external interrupts while we are making calls to
-  the APM BIOS as a measure to lessen the effects of a badly behaving
-  BIOS implementation.  The BIOS should reenable interrupts if it
-  needs to.  Unfortunately, some BIOSes do not -- especially those in
-  many of the newer IBM Thinkpads.  If you experience hangs when you
-  suspend, try setting this to Y.  Otherwise, say N.
-
-Use real mode APM BIOS call to power off
-CONFIG_APM_REAL_MODE_POWER_OFF
-  Use real mode APM BIOS calls to switch off the computer. This is
-  a work-around for a number of buggy BIOSes. Switch this option on if
-  your computer crashes instead of powering off properly.
-
-Watchdog Timer Support
-CONFIG_WATCHDOG
-  If you say Y here (and to one of the following options) and create a
-  character special file /dev/watchdog with major number 10 and minor
-  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
-  subsequently opening the file and then failing to write to it for
-  longer than 1 minute will result in rebooting the machine. This
-  could be useful for a networked machine that needs to come back
-  online as fast as possible after a lock-up. There's both a watchdog
-  implementation entirely in software (which can sometimes fail to
-  reboot the machine) and a driver for hardware watchdog boards, which
-  are more robust and can also keep track of the temperature inside
-  your computer. For details, read <file:Documentation/watchdog.txt>
-  in the kernel source.
-
-  The watchdog is usually used together with the watchdog daemon
-  which is available from
-  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
-  also monitor NFS connections and can reboot the machine when the process
-  table is full.
-
-  If unsure, say N.
-
-Disable watchdog shutdown on close
-CONFIG_WATCHDOG_NOWAYOUT
-  The default watchdog behaviour (which you get if you say N here) is
-  to stop the timer if the process managing it closes the file
-  /dev/watchdog. It's always remotely possible that this process might
-  get killed. If you say Y here, the watchdog cannot be stopped once
-  it has been started.
-
-WDT Watchdog timer
-CONFIG_WDT
-  If you have a WDT500P or WDT501P watchdog board, say Y here,
-  otherwise N. It is not possible to probe for this board, which means
-  that you have to inform the kernel about the IO port and IRQ using
-  the "wdt=" kernel option (try "man bootparam" or see the
-  documentation of your boot loader (lilo or loadlin) about how to
-  pass options to the kernel at boot time).
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called wdt.o.
-
-WDT PCI Watchdog timer
-CONFIG_WDTPCI
-  If you have a PCI WDT500/501 watchdog board, say Y here, otherwise
-  N.  It is not possible to probe for this board, which means that you
-  have to inform the kernel about the IO port and IRQ using the "wdt="
-  kernel option (try "man bootparam" or see the documentation of your
-  boot loader (lilo or loadlin) about how to pass options to the
-  kernel at boot time).
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called wdt_pci.o.
-
-WDT501 features
-CONFIG_WDT_501
-  Saying Y here and creating a character special file /dev/temperature
-  with major number 10 and minor number 131 ("man mknod") will give
-  you a thermometer inside your computer: reading from
-  /dev/temperature yields one byte, the temperature in degrees
-  Fahrenheit. This works only if you have a WDT501P watchdog board
-  installed.
-
-Fan Tachometer
-CONFIG_WDT_501_FAN
-  Enable the Fan Tachometer on the WDT501. Only do this if you have a
-  fan tachometer actually set up.
-
-Software Watchdog
-CONFIG_SOFT_WATCHDOG
-  A software monitoring watchdog. This will fail to reboot your system
-  from some situations that the hardware watchdog will recover
-  from. Equally it's a lot cheaper to install.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called
-   softdog.o.
-
-Berkshire Products PC Watchdog
-CONFIG_PCWATCHDOG
-  This is the driver for the Berkshire Products PC Watchdog card.
-  This card simply watches your kernel to make sure it doesn't freeze,
-  and if it does, it reboots your computer after a certain amount of
-  time. This driver is like the WDT501 driver but for different
-  hardware. Please read <file:Documentation/pcwd-watchdog.txt>. The PC
-  watchdog cards can be ordered from <http://www.berkprod.com/>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called pcwd.o. If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-  Most people will say N.
-
-Acquire SBC Watchdog Timer
-CONFIG_ACQUIRE_WDT
-  This is the driver for the hardware watchdog on the PSC-6x86 Single
-  Board Computer produced by Acquire Inc (and others).  This watchdog
-  simply watches your kernel to make sure it doesn't freeze, and if
-  it does, it reboots your computer after a certain amount of time.
-
-  This driver is like the WDT501 driver but for different hardware.
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called pscwdt.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  Most
-  people will say N.
-
-Advantech SBC Watchdog Timer
-CONFIG_ADVANTECH_WDT
-  If you are configuring a Linux kernel for the Advantech single-board
-  computer, say `Y' here to support its built-in watchdog timer
-  feature.  See the help for CONFIG_WATCHDOG for discussion.
-
-W83877F Watchdog Timer
-CONFIG_W83877F_WDT
-  This is the driver for the hardware watchdog on the W83877F chipset
-  as used in EMACS PC-104 motherboards (and likely others).  This
-  watchdog simply watches your kernel to make sure it doesn't freeze,
-  and if it does, it reboots your computer after a certain amount of
-  time.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called mixcomwd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  Most
-  people will say N.
-
-IB700 SBC Watchdog Timer
-CONFIG_IB700_WDT
-  This is the driver for the hardware watchdog on the IB700 Single
-  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
-  simply watches your kernel to make sure it doesn't freeze, and if
-  it does, it reboots your computer after a certain amount of time.
-
-  This driver is like the WDT501 driver but for slightly different hardware.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called ib700wdt.o. If you want to compile it as a
-  module, say M here and read Documentation/modules.txt. Most people
-  will say N.
-
-Mixcom Watchdog
-CONFIG_MIXCOMWD
-  This is a driver for the Mixcom hardware watchdog cards.  This
-  watchdog simply watches your kernel to make sure it doesn't freeze,
-  and if it does, it reboots your computer after a certain amount of
-  time.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called mixcomwd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.  Most
-  people will say N.
-
-ZF MachZ Watchdog
-CONFIG_MACHZ_WDT
-  If you are using a ZF Micro MachZ processor, say Y here, otherwise
-  N.  This is the driver for the watchdog timer builtin on that
-  processor using ZF-Logic interface.  This watchdog simply watches
-  your kernel to make sure it doesn't freeze, and if it does, it
-  reboots your computer after a certain amount of time.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called machzwd.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-SuperH 3/4 Watchdog
-CONFIG_SH_WDT
-  This driver adds watchdog support for the integrated watchdog in the
-  SuperH 3 and 4 processors. If you have one of these processors, say Y,
-  otherwise say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called shwdt.o. If you want to compile it as a module,
-  say M here and read Documentation/modules.txt.
-	      
-Toshiba Laptop support
-CONFIG_TOSHIBA
-  This adds a driver to safely access the System Management Mode of
-  the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
-  not work on models with a Pheonix BIOS. The System Management Mode
-  is used to set the BIOS and power saving options on Toshiba portables.
-
-  For information on utilities to make use of this driver see the
-  Toshiba Linux utilities web site at:
-  <http://www.buzzard.org.uk/toshiba/>.
-
-  Say Y if you intend to run this kernel on a Toshiba portable.
-  Say N otherwise.
-
-Dell Inspiron 8000 support
-CONFIG_I8K
-  This adds a driver to safely access the System Management Mode
-  of the CPU on the Dell Inspiron 8000. The System Management Mode
-  is used to read cpu temperature and cooling fan status and to
-  control the fans on the I8K portables.
-
-  This driver has been tested only on the Inspiron 8000 but it may
-  also work with other Dell laptops. You can force loading on other
-  models by passing the parameter `force=1' to the module. Use at
-  your own risk.
-
-  For information on utilities to make use of this driver see the
-  I8K Linux utilities web site at:
-  <http://www.debian.org/~dz/i8k/>
-
-  Say Y if you intend to run this kernel on a Dell Inspiron 8000.
-  Say N otherwise.
-
-/dev/cpu/microcode - Intel IA32 CPU microcode support
-CONFIG_MICROCODE
-  If you say Y here and also to "/dev file system support" in the
-  'File systems' section, you will be able to update the microcode on
-  Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
-  Pentium III, Pentium 4, Xeon etc.  You will obviously need the
-  actual microcode binary data itself which is not shipped with the
-  Linux kernel.
-
-  For latest news and information on obtaining all the required
-  ingredients for this driver, check:
-  <http://www.urbanmyth.org/microcode/>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called microcode.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.  If
-  you use modprobe or kmod you may also want to add the line
-  'alias char-major-10-184 microcode' to your /etc/modules.conf file.
-
-/dev/cpu/*/msr - Model-specific register support
-CONFIG_X86_MSR
-  This device gives privileged processes access to the x86
-  Model-Specific Registers (MSRs).  It is a character device with
-  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
-  MSR accesses are directed to a specific CPU on multi-processor
-  systems.
-
-/dev/cpu/*/cpuid - CPU information support
-CONFIG_X86_CPUID
-  This device gives processes access to the x86 CPUID instruction to
-  be executed on a specific processor.  It is a character device
-  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
-  /dev/cpu/31/cpuid.
-
-SBC-60XX Watchdog Timer
-CONFIG_60XX_WDT
- This driver can be used with the watchdog timer found on some
- single board computers, namely the 6010 PII based computer.
- It may well work with other cards.  It reads port 0x443 to enable
- and re-set the watchdog timer, and reads port 0x45 to disable
- the watchdog.  If you have a card that behave in similar ways,
- you can probably make this driver work with your card as well.
-
- You can compile this driver directly into the kernel, or use
- it as a module.  The module will be called sbc60xxwdt.o.
-
-Enhanced Real Time Clock Support
-CONFIG_RTC
-  If you say Y here and create a character special file /dev/rtc with
-  major number 10 and minor number 135 using mknod ("man mknod"), you
-  will get access to the real time clock (or hardware clock) built
-  into your computer.
-
-  Every PC has such a clock built in. It can be used to generate
-  signals from as low as 1Hz up to 8192Hz, and can also be used
-  as a 24 hour alarm. It reports status information via the file
-  /proc/driver/rtc and its behaviour is set by various ioctls on
-  /dev/rtc.
-
-  If you run Linux on a multiprocessor machine and said Y to
-  "Symmetric Multi Processing" above, you should say Y here to read
-  and set the RTC in an SMP compatible fashion.
-
-  If you think you have a use for such a device (such as periodic data
-  sampling), then say Y here, and read <file:Documentation/rtc.txt>
-  for details.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called rtc.o. If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-Tadpole ANA H8 Support
-CONFIG_H8
-  The Hitachi H8/337 is a microcontroller used to deal with the power
-  and thermal environment. If you say Y here, you will be able to
-  communicate with it via a character special device.
-
-  If unsure, say N.
-
-/dev/nvram support
-CONFIG_NVRAM
-  If you say Y here and create a character special file /dev/nvram
-  with major number 10 and minor number 144 using mknod ("man mknod"),
-  you get read and write access to the 50 bytes of non-volatile memory
-  in the real time clock (RTC), which is contained in every PC and
-  most Ataris.
-
-  This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
-  on Ataris. /dev/nvram may be used to view settings there, or to
-  change them (with some utility). It could also be used to frequently
-  save a few bits of very important data that may not be lost over
-  power-off and for which writing to disk is too insecure. Note
-  however that most NVRAM space in a PC belongs to the BIOS and you
-  should NEVER idly tamper with it. See Ralf Brown's interrupt list
-  for a guide to the use of CMOS bytes by your BIOS.
-
-  On Atari machines, /dev/nvram is always configured and does not need
-  to be selected.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called nvram.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Joystick support
-CONFIG_JOYSTICK
-  If you have a joystick, 6dof controller, gamepad, steering wheel,
-  weapon control system or something like that you can say Y here to
-  enable generic support for these controllers. You will also need to
-  say Y or M to at least one of the hardware specific drivers. This
-  will make the controllers available as /dev/input/jsX devices.
-  Please read the file <file:Documentation/input/joystick.txt> which
-  contains more information and the location of the joystick package
-  that you'll need.
-
-Game port support
-CONFIG_INPUT_GAMEPORT
-  Gameport support is for the standard 15-pin PC gameport.  If you
-  have a joystick, gamepad, gameport card, a soundcard with a gameport
-  or anything else that uses the gameport, say Y or M here and also to
-  at least one of the hardware specific drivers.
-  Please read the file <file:Documentation/input/joystick.txt> which
-  contains more information and the location of the joystick package
-  that you'll need if you use the gameport with a joystick.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called gameport.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Classic ISA/PnP gameports
-CONFIG_INPUT_NS558
-  Say Y here if you have an ISA or PnP gameport.
-  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ns558.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-PDPI Lightning 4 gamecard
-CONFIG_INPUT_LIGHTNING
-  Say Y here if you have a PDPI Lightning 4 gamecard. For more
-  information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called lightning.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Crystal SoundFusion gameports
-CONFIG_INPUT_CS461X
-  Say Y here if you have a Cirrus CS461x aka "Crystal SoundFusion"
-  PCI audio accelerator.  A product page for the CS4614 is at
-  <http://www.cirrus.com/design/products/overview/index.cfm?ProductID=40>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cs461x.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Aureal Vortex and Trident 4DWave gameports
-CONFIG_INPUT_PCIGAME
-  Say Y here if you have a Trident 4DWave DX/NX or Aureal Vortex 1/2
-  card. For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called pcigame.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-SoundBlaster Live! gameports
-CONFIG_INPUT_EMU10K1
-  Say Y here if you have a SoundBlaster Live! card and want to use
-  its gameport.  For more information on how to use the driver
-  please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called emu10k1-gp.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Classic PC analog joysticks and gamepads
-CONFIG_INPUT_ANALOG
-  Say Y here if you have a controller that connects to the PC
-  gameport.  This supports many different types, including joysticks
-  with throttle control, with rudders, or with extensions like
-  additional hats and buttons compatible with CH Flightstick Pro,
-  ThrustMaster FCS, 6 and 8 button gamepads, or Saitek Cyborg
-  joysticks.  For more information on how to use the driver please
-  read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called analog.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Assassin 3D and MadCatz Panther devices
-CONFIG_INPUT_A3D
-  Say Y here if you have an FPGaming or MadCatz controller using the
-  A3D protocol over the PC gameport.  For more information on how to
-  use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called a3d.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Logitech ADI digital joysticks and gamepads
-CONFIG_INPUT_ADI
-  Say Y here if you have a Logitech controller using the ADI
-  protocol over the PC gameport. For more information on how to use
-  the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called adi.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Creative Labs Blaster Cobra gamepad
-CONFIG_INPUT_COBRA
-  Say Y here if you have a Creative Labs Blaster Cobra gamepad.
-  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cobra.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Genius Flight2000 Digital joysticks and gamepads
-CONFIG_INPUT_GF2K
-  Say Y here if you have a Genius Flight2000 or MaxFighter digitally
-  communicating joystick or gamepad.  For more information on how to
-  use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called gf2k.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Gravis GrIP joysticks and gamepads
-CONFIG_INPUT_GRIP
-  Say Y here if you have a Gravis controller using the GrIP protocol
-  over the PC gameport.  For more information on how to use the driver
-  please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called grip.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-InterAct digital joysticks and gamepads
-CONFIG_INPUT_INTERACT
-  Say Y hereif you have an InterAct gameport or joystick
-  communicating digitally over the gameport.  For more information on
-  how to use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called interact.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-ThrustMaster DirectConnect joysticks and gamepads
-CONFIG_INPUT_TMDC
-  Say Y here if you have a ThrustMaster controller using the
-  DirectConnect (BSP) protocol over the PC gameport.  For more
-  information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called tmdc.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Microsoft SideWinder digital joysticks and gamepads
-CONFIG_INPUT_SIDEWINDER
-  Say Y here if you have a Microsoft controller using the Digital
-  Overdrive protocol over PC gameport.  For more information on how to
-  use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sidewinder.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Serial port device support
-CONFIG_INPUT_SERIO
-  Say Y here and to the Serial port input line discipline option if
-  you plan to use a joystick that communicates over the serial (COM)
-  port.  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called sidewinder.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Serial port input line discipline
-CONFIG_INPUT_SERPORT
-  Say Y here if you plan to use a joystick that communicates over the
-  serial (COM) port.  For more information on how to use the driver
-  please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called serport.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Logitech WingMan Warrior joystick
-CONFIG_INPUT_WARRIOR
-  Say Y here if you have a Logitech WingMan Warrior joystick connected
-  to your computer's serial port.  For more information on how to use
-  the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called warrior.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-LogiCad3d Magellan/SpaceMouse 6dof controller
-CONFIG_INPUT_MAGELLAN
-  Say Y here if you have a Magellan or Space Mouse 6DOF controller
-  connected to your computer's serial port.  For more information on
-  how to use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called magellan.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-SpaceTec SpaceOrb/Avenger 6dof controller
-CONFIG_INPUT_SPACEORB
-  Say Y here if you have a SpaceOrb 360 or SpaceBall Avenger 6DOF
-  controller connected to your computer's serial port.  For more
-  information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called spaceorb.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-SpaceTec SpaceBall 4000 FLX 6dof controller
-CONFIG_INPUT_SPACEBALL
-  Say Y here if you have a SpaceTec SpaceBall 4000 FLX controller
-  connected to your computer's serial port.  For more information on
-  how to use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called spaceball.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Gravis Stinger gamepad
-CONFIG_INPUT_STINGER
-  Say Y here if you have a Gravis Stinger connected to one of your
-  serial ports.  For more information on how to use the driver please
-  read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called stinger.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-I-Force joysticks/wheels
-CONFIG_INPUT_IFORCE_232
-  Say Y here if you have an I-Force joystick or steering wheel
-  connected to your serial (COM) port.  For more information on how
-  to use the driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called iforce.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-I-Force joysticks/wheels
-CONFIG_INPUT_IFORCE_USB
-  Say Y here if you have an I-Force joystick or steering wheel
-  connected to your USB port.  For more information on how to use the
-  driver please read <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called iforce.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Multisystem, Sega Genesis, Saturn joysticks and gamepads
-CONFIG_INPUT_DB9
-  Say Y here if you have a Sega Master System gamepad, Sega Genesis
-  gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
-  Commodore, Amstrad CPC joystick connected to your parallel port.
-  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt> and
-  <file:Documentation/input/joystick-parport.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called db9.o.  If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Multisystem, NES, SNES, N64, PSX joysticks and gamepads
-CONFIG_INPUT_GAMECON
-  Say Y here if you have a Nintendo Entertainment System gamepad,
-  Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad,
-  Sony PlayStation gamepad or a Multisystem -- Atari, Amiga,
-  Commodore, Amstrad CPC joystick connected to your parallel port.
-  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt> and
-  <file:Documentation/input/joystick-parport.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called gamecon.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Multisystem joysticks via TurboGraFX device
-CONFIG_INPUT_TURBOGRAFX
-  Say Y here if you have the TurboGraFX interface by Steffen Schwenke,
-  and want to use it with Multisystem -- Atari, Amiga, Commodore,
-  Amstrad CPC joystick.  For more information on how to use the driver
-  please read <file:Documentation/input/joystick.txt> and
-  <file:Documentation/input/joystick-parport.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called turbografx.o.  If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-Amiga joysticks
-CONFIG_INPUT_AMIJOY
-  Say Y here if you have an Amiga with a digital joystick connected
-  to it.  For more information on how to use the driver please read
-  <file:Documentation/input/joystick.txt>.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called joy-amiga.o.  If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Atomwide serial port support
-CONFIG_ATOMWIDE_SERIAL
-  If you have an Atomwide Serial card for an Acorn system, say Y to
-  this option.  The driver can handle 1, 2, or 3 port cards.
-  If unsure, say N.
-
-Dual serial port support
-CONFIG_DUALSP_SERIAL
-  If you have the Serial Port's dual serial card for an Acorn system,
-  say Y to this option.  If unsure, say N.
-
-NetWinder Button
-CONFIG_NWBUTTON
-  If you say Y here and create a character device node /dev/nwbutton
-  with major and minor numbers 10 and 158 ("man mknod"), then every
-  time the orange button is pressed a number of times, the number of
-  times the button was pressed will be written to that device.
-
-  This is most useful for applications, as yet unwritten, which
-  perform actions based on how many times the button is pressed in a
-  row.
-
-  Do not hold the button down for too long, as the driver does not
-  alter the behaviour of the hardware reset circuitry attached to the
-  button; it will still execute a hard reset if the button is held
-  down for longer than approximately five seconds.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  nwbutton.o.
-
-  Most people will answer Y to this question and "Reboot Using Button"
-  below to be able to initiate a system shutdown from the button.
-
-Reboot Using Button
-CONFIG_NWBUTTON_REBOOT
-  If you say Y here, then you will be able to initiate a system
-  shutdown and reboot by pressing the orange button a number of times.
-  The number of presses to initiate the shutdown is two by default,
-  but this can be altered by modifying the value of NUM_PRESSES_REBOOT
-  in nwbutton.h and recompiling the driver or, if you compile the
-  driver as a module, you can specify the number of presses at load
-  time with "insmod button reboot_count=<something>".
-
-Sound card support
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
-OSS sound modules
-CONFIG_SOUND_OSS
-  OSS is the Open Sound System suite of sound card drivers.  They make
-  sound programming easier since they provide a common API.  Say Y or
-  M here (the module will be called sound.o) if you haven't found a
-  driver for your sound card above, then pick your driver from the
-  list below.
-
-Persistent DMA buffers
-CONFIG_SOUND_DMAP
-  Linux can often have problems allocating DMA buffers for ISA sound
-  cards on machines with more than 16MB of RAM. This is because ISA
-  DMA buffers must exist below the 16MB boundary and it is quite
-  possible that a large enough free block in this region cannot be
-  found after the machine has been running for a while. If you say Y
-  here the DMA buffers (64Kb) will be allocated at boot time and kept
-  until the shutdown. This option is only useful if you said Y to
-  "OSS sound modules", above. If you said M to "OSS sound modules"
-  then you can get the persistent DMA buffer functionality by passing
-  the command-line argument "dmabuf=1" to the sound.o module.
-
-  Say Y unless you have 16MB or more RAM or a PCI sound card.
-
-Support for Aztech Sound Galaxy (non-PnP) cards
-CONFIG_SOUND_SGALAXY
-  This module initializes the older non Plug and Play sound galaxy
-  cards from Aztech. It supports the Waverider Pro 32 - 3D and the
-  Galaxy Washington 16.
-
-  If you compile the driver into the kernel, you have to add
-  "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
-  line.
-
-Support for AD1816(A) based cards
-CONFIG_SOUND_AD1816
-  Say M here if you have a sound card based on the Analog Devices
-  AD1816(A) chip.
-
-  If you compile the driver into the kernel, you have to add
-  "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-Yamaha OPL3-SA1 audio controller
-CONFIG_SOUND_OPL3SA1
-  Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
-  usually built into motherboards. Read
-  <file:Documentation/sound/OPL3-SA> for details.
-
-  If you compile the driver into the kernel, you have to add
-  "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-  command line.
-
-ProAudioSpectrum 16 support
-CONFIG_SOUND_PAS
-  Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
-  16 or Logitech SoundMan 16 sound card. Answer N if you have some
-  other card made by Media Vision or Logitech since those are not
-  PAS16 compatible. Please read <file:Documentation/sound/PAS16>.
-  It is not necessary to add Sound Blaster support separately; it
-  is included in PAS support.
-
-  If you compile the driver into the kernel, you have to add
-  "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
-  to the kernel command line.
-
-Enable PAS16 joystick port
-CONFIG_PAS_JOYSTICK
-  Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
-  port.
-
-100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support
-CONFIG_SOUND_SB
-  Answer Y if you have an original Sound Blaster card made by Creative
-  Labs or a 100% hardware compatible clone (like the Thunderboard or
-  SM Games). For an unknown card you may answer Y if the card claims
-  to be Sound Blaster-compatible.
-
-  Please read the file <file:Documentation/sound/Soundblaster>.
-
-  You should also say Y here for cards based on the Avance Logic
-  ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/ALS>) and
-  for cards based on ESS chips (read
-  <file:Documentation/sound/ESS1868> and
-  <file:Documentation/sound/ESS>). If you have an SB AWE 32 or SB AWE
-  64, say Y here and also to "AWE32 synth" below and read
-  <file:Documentation/sound/INSTALL.awe>. If you have an IBM Mwave
-  card, say Y here and read <file:Documentation/sound/mwave>.
-
-  If you compile the driver into the kernel and don't want to use
-  isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
-  command line.
-
-  You can say M here to compile this driver as a module; the module is
-  called sb.o.
-
-Gravis Ultrasound support
-CONFIG_SOUND_GUS
-  Say Y here for any type of Gravis Ultrasound card, including the GUS
-  or GUS MAX.  See also <file:Documentation/sound/ultrasound> for more
-  information on configuring this card with modules.
-
-  If you compile the driver into the kernel, you have to add
-  "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-MPU-401 support (NOT for SB16)
-CONFIG_SOUND_MPU401
-  Be careful with this question.  The MPU401 interface is supported by
-  all sound cards.  However, some natively supported cards have their
-  own driver for MPU401.  Enabling this MPU401 option with these cards
-  will cause a conflict.  Also, enabling MPU401 on a system that
-  doesn't really have a MPU401 could cause some trouble.  If your card
-  was in the list of supported cards, look at the card specific
-  instructions in the <file:Documentation/sound/README.OSS> file.  It
-  is safe to answer Y if you have a true MPU401 MIDI interface card.
-
-  If you compile the driver into the kernel, you have to add
-  "mpu401=<io>,<irq>" to the kernel command line.
-
-6850 UART support
-CONFIG_SOUND_UART6850
-  This option enables support for MIDI interfaces based on the 6850
-  UART chip. This interface is rarely found on sound cards. It's safe
-  to answer N to this question.
-
-  If you compile the driver into the kernel, you have to add
-  "uart6850=<io>,<irq>" to the kernel command line.
-
-PSS (AD1848, ADSP-2115, ESC614) support
-CONFIG_SOUND_PSS
-  Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
-  ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
-  ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
-  how to compile it into the kernel or as a module see the file
-  <file:Documentation/sound/PSS>.
-
-  If you compile the driver into the kernel, you have to add
-  "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
-  command line.
-
-Enable PSS mixer (Beethoven ADSP-16 and other compatible)
-CONFIG_PSS_MIXER
-  Answer Y for Beethoven ADSP-16. You may try to say Y also for other
-  cards if they have master volume, bass, treble, and you can't
-  control it under Linux. If you answer N for Beethoven ADSP-16, you
-  can't control master volume, bass, treble and synth volume.
-
-  If you said M to "PSS support" above, you may enable or disable this
-  PSS mixer with the module parameter pss_mixer. For more information
-  see the file <file:Documentation/sound/PSS>.
-
-Have DSPxxx.LD firmware file
-CONFIG_PSS_HAVE_BOOT
-  If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
-  to include this file. Without this file the synth device (OPL) may
-  not work.
-
-Full pathname of DSPxxx.LD firmware file
-CONFIG_PSS_BOOT_FILE
-  Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
-  starting from /.
-
-Microsoft Sound System support
-CONFIG_SOUND_MSS
-  Again think carefully before answering Y to this question.  It's
-  safe to answer Y if you have the original Windows Sound System card
-  made by Microsoft or Aztech SG 16 Pro (or NX16 Pro).  Also you may
-  say Y in case your card is NOT among these:
-
-     ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
-     Ensoniq SoundScape (and compatibles made by Reveal and Spea),
-     Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
-     Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
-     Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
-     82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
-     Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
-     SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
-     Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
-     Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
-     Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
-     notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
-     synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
-
-  For cards having native support in VoxWare, consult the card
-  specific instructions in <file:Documentation/sound/README.OSS>.
-  Some drivers have their own MSS support and saying Y to this option
-  will cause a conflict.
-
-  If you compile the driver into the kernel, you have to add
-  "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
-  line.
-
-SGI Visual Workstation on-board audio
-CONFIG_SOUND_VWSND
-  Say Y or M if you have an SGI Visual Workstation and you want to be
-  able to use its on-board audio.  Read
-  <file:Documentation/sound/vwsnd> for more info on this driver's
-  capabilities.
-
-Ensoniq SoundScape support
-CONFIG_SOUND_SSCAPE
-  Answer Y if you have a sound card based on the Ensoniq SoundScape
-  chipset. Such cards are being manufactured at least by Ensoniq, Spea
-  and Reveal (Reveal makes also other cards).
-
-  If you compile the driver into the kernel, you have to add
-  "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
-  line.
-
-MediaTriX AudioTriX Pro support
-CONFIG_SOUND_TRIX
-  Answer Y if you have the AudioTriX Pro sound card manufactured
-  by MediaTrix.
-
-Have TRXPRO.HEX firmware file
-CONFIG_TRIX_HAVE_BOOT
-  The MediaTrix AudioTrix Pro has an on-board microcontroller which
-  needs to be initialized by downloading the code from the file
-  TRXPRO.HEX in the DOS driver directory. If you don't have the
-  TRXPRO.HEX file handy you may skip this step. However, the SB and
-  MPU-401 modes of AudioTrix Pro will not work without this file!
-
-Full pathname of TRXPRO.HEX firmware file
-CONFIG_TRIX_BOOT_FILE
-  Enter the full pathname of your TRXPRO.HEX file, starting from /.
-
-Support for OPTi MAD16 and/or Mozart based cards
-CONFIG_SOUND_MAD16
-  Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
-  82C928 or 82C929 or 82C931) audio interface chip. These chips are
-  quite common so it's possible that many no-name cards have one of
-  them. In addition the MAD16 chip is used in some cards made by known
-  manufacturers such as Turtle Beach (Tropez), Reveal (some models)
-  and Diamond (latest ones). Note however that the Tropez sound cards
-  have their own driver; if you have one of those, say N here and Y or
-  M to "Full support for Turtle Beach WaveFront", below.
-
-  If you compile the driver into the kernel, you have to add
-  "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
-  kernel command line.
-
-  See also <file:Documentation/sound/Opti> and
-  <file:Documentation/sound/MAD16> for more information on setting
-  these cards up as modules.
-
-Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/sound cards
-CONFIG_SOUND_WAVEFRONT
-  Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
-  and read the files <file:Documentation/sound/Wavefront> and
-  <file:Documentation/sound/Tropez+>.
-
-Support MIDI in older MAD16 based cards (requires SB)
-CONFIG_MAD16_OLDCARD
-  Answer Y (or M) if you have an older card based on the C928 or
-  Mozart chipset and you want to have MIDI support. If you enable this
-  option you also need to enable support for Sound Blaster.
-
-Support for Crystal CS4232 based (PnP) cards
-CONFIG_SOUND_CS4232
-  Say Y here if you have a card based on the Crystal CS4232 chip set,
-  which uses its own Plug and Play protocol.
-
-  If you compile the driver into the kernel, you have to add
-  "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-  command line.
-
-  See <file:Documentation/sound/CS4232> for more information on
-  configuring this card.
-
-Support for Yamaha OPL3-SA2 and SA3 based PnP cards
-CONFIG_SOUND_OPL3SA2
-  Say Y or M if you have a card based on one of these Yamaha sound
-  chipsets or the "SAx", which is actually a SA3. Read
-  <file:Documentation/sound/OPL3-SA2> for more information on
-  configuring these cards.
-
-  If you compile the driver into the kernel and do not also
-  configure in the optional ISA PnP support, you will have to add
-  "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
-  command line.
-
-Support for Turtle Beach Wave Front (Maui, Tropez) synthesizers
-CONFIG_SOUND_MAUI
-  Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
-  sound card.
-
-  If you compile the driver into the kernel, you have to add
-  "maui=<io>,<irq>" to the kernel command line.
-
-Have OSWF.MOT firmware file
-CONFIG_MAUI_HAVE_BOOT
-  Turtle Beach Maui and Tropez sound cards have a microcontroller
-  which needs to be initialized prior to use. OSWF.MOT is a file
-  distributed with the card's DOS/Windows drivers. Answer Y if you
-  have this file.
-
-Full pathname of OSWF.MOT firmware file
-CONFIG_MAUI_BOOT_FILE
-  Enter the full pathname of your OSWF.MOT file, starting from /.
-
-Support for Turtle Beach MultiSound Classic, Tahiti, Monterey
-CONFIG_SOUND_MSNDCLAS
-  Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
-  Monterey (not for the Pinnacle or Fiji).
-
-  See <file:Documentation/sound/MultiSound> for important information
-  about this driver.  Note that it has been discontinued, but the
-  Voyetra Turtle Beach knowledge base entry for it is still available
-  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/790.asp>.
-
-MSND Classic I/O
-CONFIG_MSNDCLAS_IO
-  I/O port address for the MultiSound Classic and related cards.
-
-MSND Classic IRQ
-CONFIG_MSNDCLAS_IRQ
-  Interrupt Request line for the MultiSound Classic and related cards.
-
-MSND Classic memory address
-CONFIG_MSNDCLAS_MEM
-  Memory-mapped I/O base address for the MultiSound Classic and
-  related cards.
-
-Full pathname of MSNDINIT.BIN firmware file
-CONFIG_MSNDCLAS_INIT_FILE
-  The MultiSound cards have two firmware files which are required for
-  operation, and are not currently included. These files can be
-  obtained from Turtle Beach. See
-  <file:Documentation/sound/MultiSound> for information on how to
-  obtain this.
-
-Full pathname of MSNDPERM.BIN firmware file
-CONFIG_MSNDCLAS_PERM_FILE
-  The MultiSound cards have two firmware files which are required for
-  operation, and are not currently included. These files can be
-  obtained from Turtle Beach. See
-  <file:Documentation/sound/MultiSound> for information on how to
-  obtain this.
-
-Support for Turtle Beach MultiSound Pinnacle, Fiji
-CONFIG_SOUND_MSNDPIN
-  Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
-  See <file:Documentation/sound/MultiSound> for important information
-  about this driver. Note that it has been discontinued, but the
-  Voyetra Turtle Beach knowledge base entry for it is still available
-  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/600.asp>.
-
-MSND Pinnacle IDE I/O 0
-CONFIG_MSNDPIN_IDE_IO0
-  CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
-  Pinnacle and Fiji sound cards.
-
-MSND Pinnacle IDE I/O 1
-CONFIG_MSNDPIN_IDE_IO1
-  CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
-  Pinnacle and Fiji sound cards.
-
-MSND Pinnacle IDE IRQ
-CONFIG_MSNDPIN_IDE_IRQ
-  Interrupt request number for the IDE CD-ROM interface on the
-  MultiSound Pinnacle and Fiji sound cards.
-
-MSND Pinnacle I/O
-CONFIG_MSNDPIN_IO
-  Memory-mapped I/O base address for the primary synthesizer on
-  MultiSound Pinnacle and Fiji sound cards.
-
-MSND Pinnacle MPU I/O
-CONFIG_MSNDPIN_MPU_IO
-  Memory-mapped I/O base address for the Kurzweil daughterboard
-  synthesizer on MultiSound Pinnacle and Fiji sound cards.
-
-MSND Pinnacle MPU IRQ
-CONFIG_MSNDPIN_MPU_IRQ
-  Iinterrupt request number for the Kurzweil daughterboard
-  synthesizer on MultiSound Pinnacle and Fiji sound cards.
-
-MSND Pinnacle IRQ
-CONFIG_MSNDPIN_IRQ
-  Interrupt request line for the primary synthesizer on MultiSound
-  Pinnacle and Fiji sound cards.
-
-MSND Pinnacle joystick I/O
-CONFIG_MSNDPIN_JOYSTICK_IO
-  Memory-mapped I/O base address for the joystick port on MultiSound
-  Pinnacle and Fiji sound cards.
-
-MSND Pinnacle memory
-CONFIG_MSNDPIN_MEM
-  Memory-mapped I/O base address for the primary synthesizer on
-  MultiSound Pinnacle and Fiji sound cards.
-
-Full pathname of PNDSPINI.BIN firmware file
-CONFIG_MSNDPIN_INIT_FILE
-  The MultiSound cards have two firmware files which are required
-  for operation, and are not currently included. These files can be
-  obtained from Turtle Beach. See
-  <file:Documentation/sound/MultiSound> for information on how to
-  obtain this.
-
-Full pathname of PNDSPERM.BIN firmware file
-CONFIG_MSNDPIN_PERM_FILE
-  The MultiSound cards have two firmware files which are required for
-  operation, and are not currently included. These files can be
-  obtained from Turtle Beach. See
-  <file:Documentation/sound/MultiSound> for information on how to
-  obtain this.
-
-MSND Pinnacle has S/PDIF I/O
-CONFIG_MSNDPIN_DIGITAL
-  If you have the S/PDIF daughter board for the Pinnacle or Fiji,
-  answer Y here; otherwise, say N. If you have this, you will be able
-  to play and record from the S/PDIF port (digital signal). See
-  <file:Documentation/sound/MultiSound> for information on how to make
-  use of this capability.
-
-MSND Pinnacle non-PnP Mode
-CONFIG_MSNDPIN_NONPNP
-  The Pinnacle and Fiji card resources can be configured either with
-  PnP, or through a configuration port. Say Y here if your card is NOT
-  in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
-  use of the IDE and joystick peripherals on the card as well; these
-  do not show up when the card is in PnP mode. Specifying zero for any
-  resource of a device will disable the device. If you are running the
-  card in PnP mode, you must say N here and use isapnptools to
-  configure the card's resources.
-
-MSND Pinnacle config port
-CONFIG_MSNDPIN_CFG
-  This is the port which the Pinnacle and Fiji uses to configure the
-  card's resources when not in PnP mode. If your card is in PnP mode,
-  then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
-  Mode".
-
-MSND buffer size (kB)
-CONFIG_MSND_FIFOSIZE
-  Configures the size of each audio buffer, in kilobytes, for
-  recording and playing in the MultiSound drivers (both the Classic
-  and Pinnacle). Larger values reduce the chance of data overruns at
-  the expense of overall latency. If unsure, use the default.
-
-Yamaha FM synthesizer (YM3812/OPL-3) support
-CONFIG_SOUND_YM3812
-  Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
-  Answering Y is usually a safe and recommended choice, however some
-  cards may have software (TSR) FM emulation. Enabling FM support with
-  these cards may cause trouble (I don't currently know of any such
-  cards, however). Please read the file
-  <file:Documentation/sound/OPL3> if your card has an OPL3 chip.
-
-  If you compile the driver into the kernel, you have to add
-  "opl3=<io>" to the kernel command line.
-
-  If unsure, say Y.
-
-ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)
-CONFIG_SOUND_ACI_MIXER
-  ACI (Audio Command Interface) is a protocol used to communicate with
-  the microcontroller on some sound cards produced by miro and
-  Cardinal Technologies.  The main function of the ACI is to control
-  the mixer and to get a product identification.
-
-  This VoxWare ACI driver currently supports the ACI functions on the
-  miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
-  also controls the radio tuner. This is supported in the video4linux
-  miropcm20 driver (say M or Y here and go back to "Multimedia
-  devices" -> "Radio Adapters").
-
-  This driver is also available as a module and will be called aci.o.
-
-SB32/AWE support
-CONFIG_SOUND_AWE32_SYNTH
-  Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
-  similar sound card. See <file:Documentation/sound/README.awe>,
-  <file:Documentation/sound/AWE32> and the Soundblaster-AWE
-  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>
-  for more info.
-
-Gallant Audio Cards (SC-6000 and SC-6600 based)
-CONFIG_SOUND_AEDSP16
-  Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
-  driver supports Audio Excel DSP 16 but not the III nor PnP versions
-  of this card.
-
-  The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
-  a Microsoft Sound System card, so you should have said Y to either
-  "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
-  or "Microsoft Sound System support", above, and you need to answer
-  the "MSS emulation" and "SBPro emulation" questions below
-  accordingly. You should say Y to one and only one of these two
-  questions.
-
-  Read the <file:Documentation/sound/README.OSS> file and the head of
-  <file:drivers/sound/aedsp16.c> as well as
-  <file:Documentation/sound/AudioExcelDSP16> to get more information
-  about this driver and its configuration.
-
-Audio Excel DSP 16 (SBPro emulation)
-CONFIG_AEDSP16_SBPRO
-  Answer Y if you want your audio card to emulate Sound Blaster Pro.
-  You should then say Y to "100% Sound Blaster compatibles
-  (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
-  emulation)".
-
-  If you compile the driver into the kernel, you have to add
-  "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
-  command line.
-
-Audio Excel DSP 16 (MSS emulation)
-CONFIG_AEDSP16_MSS
-  Answer Y if you want your audio card to emulate Microsoft Sound
-  System. You should then say Y to "Microsoft Sound System support"
-  and say N to "Audio Excel DSP 16 (SBPro emulation)".
-
-SC-6600 based audio cards (new Audio Excel DSP 16)
-CONFIG_SC6600
-  The SC6600 is the new version of DSP mounted on the Audio Excel DSP
-  16 cards. Find in the manual the FCC ID of your audio card and
-  answer Y if you have an SC6600 DSP.
-
-SC-6600 Joystick Interface
-CONFIG_SC6600_JOY
-  Say Y here in order to use the joystick interface of the Audio Excel
-  DSP 16 card.
-
-SC-6600 CD-ROM Interface
-CONFIG_SC6600_CDROM  (4=None, 3=IDE, 1=Panasonic, 0=Sony)
-  This is used to activate the CD-ROM interface of the Audio Excel
-  DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
-  CD-ROM present.
-
-SC-6600 CD-ROM Interface I/O Address
-CONFIG_SC6600_CDROMBASE
-  Base I/O port address for the CD-ROM interface of the Audio Excel
-  DSP 16 card.
-
-Audio Excel DSP 16 (MPU401 emulation)
-CONFIG_AEDSP16_MPU401
-  Answer Y if you want your audio card to emulate the MPU-401 midi
-  interface. You should then also say Y to "MPU-401 support".
-
-  Note that the I/O base for MPU-401 support of aedsp16 is the same
-  you have selected for "MPU-401 support". If you are using this
-  driver as a module you have to specify the MPU I/O base address with
-  the parameter 'mpu_base=0xNNN'.
-
-C-Media PCI (CMI8338/8378)
-CONFIG_SOUND_CMPCI
-  Say Y or M if you have a PCI sound card using the CMI8338
-  or the CMI8378 chipset.  Data on these chips are available at
-  <http://www.cmedia.com.tw/>.
-
-  A userspace utility to control some internal registers of these
-  chips is available at
-  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-Support CMI8738 based audio cards
-CONFIG_SOUND_CMPCI_CM8738
-  Say Y or M if you have a PCI sound card using the CMI8338
-  or the CMI8378 chipset.  Data on this chip is available at
-  <http://www.cmedia.com.tw/doc8738.htm>.
-
-  A userspace utility to control some internal registers of these
-  chips is available at
-  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-Enable joystick
-CONFIG_SOUND_CMPCI_JOYSTICK
-  Say here in order to enable the joystick port on a sound crd using
-  the CMI8338 or the CMI8738 chipset.  Data on these chips are
-  available at <http://www.cmedia.com.tw/>.
-
-Number of speakers (2, 4, 5, 6)
-CONFIG_SOUND_CMPCI_SPEAKERS
-  Specify the number of speaker channels you want the card to drive,
-  as an integer.
-
-Enable S/PDIF loop for CMI8738
-CONFIG_SOUND_CMPCI_SPDIFLOOP
-  Enable loopback from SPDIF in to SPDIF out.  For discussion, see
-  "The 8738 Audio SPDIF In/Out Technical Data" on the technical
-  support page at <http://www.cmedia.com.tw/>.
-
-  A userspace utility to control even more internal registers of these
-  chips is available at
-  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-  This package will among other things help you enable SPDIF 
-  out/in/loop/monitor.
-
-Creative SBLive! (EMU10K1) based PCI sound cards
-CONFIG_SOUND_EMU10K1
-  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
-  such as the Creative SBLive!, SB PCI512 or Emu-APS.
-
-  For more information on this driver and the degree of support for the
-  different card models please check <http://opensource.creative.com/>.
-
-  It is now possible to load dsp microcode patches into the EMU10K1
-  chip.  These patches are used to implement real time sound
-  processing effects which include for example: signal routing,
-  bass/treble control, AC3 passthrough, ...
-  Userspace tools to create new patches and load/unload them can be
-  found at <http://opensource.creative.com/dist.html>.
-
-Creative EMU10K1 MIDI
-CONFIG_MIDI_EMU10K1
-  Say Y if you want to be able to use the OSS /dev/sequencer
-  interface.  This code is still experimental.
-
-Crystal SoundFusion (CS4280/461x)
-CONFIG_SOUND_FUSION
-  This module drives the Crystal SoundFusion devices (CS4280/46xx
-  series) when wired as native sound drivers with AC97 codecs.  If
-  this driver does not work try the CS4232 driver.
-
-Ensoniq AudioPCI (ES1370) based PCI sound cards
-CONFIG_SOUND_ES1370
-  Say Y or M if you have a PCI sound card utilizing the Ensoniq
-  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
-  out if your sound card uses an ES1370 without removing your
-  computer's cover, use lspci -n and look for the PCI ID
-  1274:5000. Since Ensoniq was bought by Creative Labs,
-  Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
-  This driver differs slightly from OSS/Free, so PLEASE READ
-  <file:Documentation/sound/es1370>.
-
-Ensoniq AudioPCI 97 (ES1371) based sound cards
-CONFIG_SOUND_ES1371
-  Say Y or M if you have a PCI sound card utilizing the Ensoniq
-  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
-  your sound card uses an ES1371 without removing your computer's
-  cover, use lspci -n and look for the PCI ID 1274:1371. Since
-  Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
-  models are either ES1370 or ES1371 based. This driver differs
-  slightly from OSS/Free, so PLEASE READ
-  <file:Documentation/sound/es1371>.
-
-ESS Solo1 based PCI sound cards (eg. SC1938)
-CONFIG_SOUND_ESSSOLO1
-  Say Y or M if you have a PCI sound card utilizing the ESS Technology
-  Solo1 chip. To find out if your sound card uses a
-  Solo1 chip without removing your computer's cover, use
-  lspci -n and look for the PCI ID 125D:1969. This driver
-  differs slightly from OSS/Free, so PLEASE READ
-  <file:Documentation/sound/solo1>.
-
-S3 SonicVibes based PCI sound cards
-CONFIG_SOUND_SONICVIBES
-  Say Y or M if you have a PCI sound card utilizing the S3
-  SonicVibes chipset. To find out if your sound card uses a
-  SonicVibes chip without removing your computer's cover, use
-  lspci -n and look for the PCI ID 5333:CA00. This driver
-  differs slightly from OSS/Free, so PLEASE READ
-  <file:Documentation/sound/sonicvibes>.
-
-Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core
-CONFIG_SOUND_TRIDENT
-  Say Y or M if you have a PCI sound card utilizing the Trident
-  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
-  or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
-  in SiS960 Super South Bridge and SiS540/630 Single Chipset.
-  The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
-  M1535+ or M1535D+ South Bridge.
-
-  Use lspci -n to find out if your sound card or chipset uses
-  Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
-  for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
-  10B9:5451 stands for ALi5451.
-
-  This driver supports S/PDIF in/out (record/playback) for ALi 5451
-  embedded in ALi M1535+ and M1535D+. Note that they aren't all
-  enabled by default; you can enable them by saying Y to "/proc file
-  system support" and "Sysctl support", and after the /proc file
-  system has been mounted, executing the command
-
-	command			what is enabled
-
-  echo 0>/proc/ALi5451	pcm out is also set to S/PDIF out. (Default).
-
-  echo 1>/proc/ALi5451	use S/PDIF out to output pcm data.
-
-  echo 2>/proc/ALi5451	use S/PDIF out to output non-pcm data.
-                        (AC3...).
-
-  echo 3>/proc/ALi5451	record from Ac97 in(MIC, Line in...).
-                        (Default).
-
-  echo 4>/proc/ALi5451	no matter Ac97 settings, record from S/PDIF
-                        in.
-
-
-  This driver differs slightly from OSS/Free, so PLEASE READ the
-  comments at the top of <file:drivers/sound/trident.c>.
-
-Rockwell WaveArtist
-CONFIG_SOUND_WAVEARTIST
-  Say Y here to include support for the Rockwell WaveArtist sound
-  system.  This driver is mainly for the NetWinder.
-
-VIA 82Cxxx Audio Codec
-CONFIG_SOUND_VIA82CXXX
-  Say Y here to include support for the audio codec found on VIA
-  82Cxxx-based chips. Typically these are built into a motherboard.
-
-  DO NOT select Sound Blaster or Adlib with this driver, unless
-  you have a Sound Blaster or Adlib card in addition to your VIA
-  audio chip.
-
-VIA 82C686 MIDI
-CONFIG_MIDI_VIA82CXXX
-  Answer Y to use the MIDI interface of the Via686. You may need to
-  enable this in the BIOS before it will work. This is for connection
-  to external MIDI hardware, and is not required for software playback
-  of MIDI files.
-
-NeoMagic 256AV/256ZX sound chipsets
-CONFIG_SOUND_NM256
-  Say M here to include audio support for the NeoMagic 256AV/256ZX
-  chipsets. These are the audio chipsets found in the Sony
-  Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
-  laptops. It includes support for an AC97-compatible mixer and an
-  apparently proprietary sound engine.
-
-  See <file:Documentation/sound/NM256> for further information.
-
-ESS Maestro, Maestro2, Maestro2E driver
-CONFIG_SOUND_MAESTRO
-  Say Y or M if you have a sound system driven by ESS's Maestro line
-  of PCI sound chips.  These include the Maestro 1, Maestro 2, and
-  Maestro 2E.  See <file:Documentation/sound/Maestro> for more
-  details.
-
-ESS Maestro3/Allegro driver
-CONFIG_SOUND_MAESTRO3
-  Say Y or M if you have a sound system driven by ESS's Maestro 3
-  PCI sound chip.
-
-Adlib Cards
-CONFIG_SOUND_ADLIB
-  Includes ASB 64 4D. Information on programming AdLib cards is
-  available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
-
-Crystal Sound CS4281
-CONFIG_SOUND_CS4281
-  Picture and feature list at
-  <http://www.pcbroker.com/crystal4281.html>.
-
-16 bit sampling option of GUS (_NOT_ GUS MAX)
-CONFIG_SOUND_GUS16
-  Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
-  sampling at 16-bit width.
-
-GUS MAX support
-CONFIG_SOUND_GUSMAX
-  Support for Gravis Ulstrasound MAX.
-
-Intel ICH audio support
-CONFIG_SOUND_ICH
-  Support for integral audio in Intel's I/O Controller Hub (ICH)
-  chipset, as used on the 810/820/840 motherboards.
-
-Verbose initialization
-CONFIG_SOUND_TRACEINIT
-  Verbose soundcard initialization -- affects the format of autoprobe
-  and initialization messages at boot time.
-
-TV card (bt848) mixer support
-CONFIG_SOUND_TVMIXER
-  Support for audio mixer facilities on the BT848 TV frame-grabber
-  card.
-
-VIDC 16-bit sound
-CONFIG_SOUND_VIDC
-  16-bit support for the VIDC onboard sound hardware found on Acorn
-  machines.
-
-Loopback MIDI device support
-CONFIG_SOUND_VMIDI
-  Support for MIDI loopback on port 1 or 2.
-
-Yamaha YMF7xx PCI audio (native mode)
-CONFIG_SOUND_YMFPCI
-  Support for Yamaha cards including the YMF711, YMF715, YMF718,
-  YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-Yamaha PCI legacy ports support
-CONFIG_SOUND_YMFPCI_LEGACY
-  Support for YMF7xx PCI cards emulating an MP401.
-
-RME Hammerfall (RME96XX) support
-CONFIG_SOUND_RME96XX
-  Say Y or M if you have a Hammerfall, Hammerfall light or Hammerfall
-  DSP card from RME.
-
-Are you using a crosscompiler
-CONFIG_CROSSCOMPILE
-  Say Y here if you are compiling the kernel on a different
-  architecture than the one it is intended to run on.
-
-Kernel support for Linux/MIPS 32-bit binary compatibility
-CONFIG_MIPS32_COMPAT
-  Select this option if you want Linux/MIPS 32-bit binary
-  compatibility. Since all software available for Linux/MIPS is
-  currently 32-bit you should say Y here.
-
-Build fp exception handler module
-CONFIG_MIPS_FPE_MODULE
-  Build the floating point exception handler module. This option is
-  only useful for people working on the floating point exception
-  handler. If you don't, say N.
-
-Galileo EV64120 Evaluation board
-CONFIG_MIPS_EV64120
-  This is an evaluation board based on the Galileo GT-64120
-  single-chip system controller that contains a MIPS R5000 compatible
-  core running at 75/100MHz.  Their website is located at
-  <http://www.galileot.com/>.  Say Y here if you wish to build a
-  kernel for this platform.
-
-Galileo EV96100 Evaluation board
-CONFIG_MIPS_EV96100
-  This is an evaluation board based on the Galielo GT-96100 LAN/WAN
-  communications controllers containing a MIPS R5000 compatible core
-  running at 83MHz. Their website is <http://www.galileot.com/>. Say Y
-  here if you wish to build a kernel for this platform.
-
-Support for ITE 8172G board
-CONFIG_MIPS_ITE8172
-  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
-  with ATX form factor that utilizes a MIPS R5000 to work with its
-  ITE8172G companion internet appliance chip. The MIPS core can be
-  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
-  a kernel for this platform.
-
-Support for Globespan IVR board
-CONFIG_MIPS_IVR
-  This is an evaluation board built by Globespan to showcase thir
-  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
-  R5000 MIPS core. More information can be found out their website
-  located at <http://www.globespan.net/products/product4.html>P. Say Y
-  here if you wish to build a kernel for this platform.
-
-Support for Alchemy Semi PB1000 board
-CONFIG_MIPS_PB1000
-  This is an evaluation board built by Alchemy Semiconducttor to
-  showcase their Au1000 Internet Edge Processor. It is SOC design
-  containing a MIPS32 core running at 266/400/500MHz with many
-  integrated peripherals. Further information can be found at their
-  website, <http://www.alchemysemi.com/>. Say Y here if you wish to
-  build a kernel for this platform.
-
-Support for Philips Nino
-CONFIG_NINO
-  Say Y here to select a kernel for the Philips Nino Palm PC. The
-  website at <http://www.realitydiluted.com/projects/nino/index.html>
-  will have more information.
-
-Model-500/510
-CONFIG_NINO_16MB
-  Say Y here to build a kernel specifically for Nino 500/501 color
-  Palm PCs from Philips (INCOMPLETE).
-
-Model-200/210/312/320/325/350/390
-CONFIG_NINO_8MB
-  Say Y here to build a kernel specifically for Nino Palm PCs with
-  8MB of memory. These include models 200/210/312/320/325/350/390.
-
-Model-300/301/302/319
-CONFIG_NINO_4MB
-  Say Y here to build a kernel specifically for Nino Palm PCs with
-  4MB of memory. These include models 300/301/302/319.
-
-Low-level debugging
-CONFIG_LL_DEBUG
-  Enable low-level debugging assertion macros in the kernel code.
-  Currently used only by the time services code in the MIPS port.
-  Don't turn this on unless you know what you are doing.
-
-Remote GDB kernel debugging
-CONFIG_REMOTE_DEBUG
-  If you say Y here, it will be possible to remotely debug the MIPS
-  kernel using gdb. This enlarges your kernel image disk size by
-  several megabytes and requires a machine with more than 16 MB,
-  better 32 MB RAM to avoid excessive linking time. This is only
-  useful for kernel hackers. If unsure, say N.
-
-Run uncached
-CONFIG_MIPS_UNCACHED
-  If you say Y here there kernel will disable all CPU caches.  This will
-  reduce the system's performance dramatically but can help finding
-  otherwise hard to track bugs.  It can also useful if you're doing
-  hardware debugging with a logic analyzer and need to see all traffic
-  on the bus.
-
-Magic System Request Key support
-CONFIG_MAGIC_SYSRQ
-  If you say Y here, you will have some control over the system even
-  if the system crashes for example during kernel debugging (e.g., you
-  will be able to flush the buffer cache to disk, reboot the system
-  immediately or dump some status information). This is accomplished
-  by pressing various keys while holding SysRq (Alt+PrintScreen). It
-  also works on a serial console (on PC hardware at least), if you
-  send a BREAK and then within 5 seconds a command keypress. The
-  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
-  unless you really know what this hack does.
-
-ISDN support
-CONFIG_ISDN
-  ISDN ("Integrated Services Digital Networks", called RNIS in France)
-  is a special type of fully digital telephone service; it's mostly
-  used to connect to your Internet service provider (with SLIP or
-  PPP).  The main advantage is that the speed is higher than ordinary
-  modem/telephone connections, and that you can have voice
-  conversations while downloading stuff.  It only works if your
-  computer is equipped with an ISDN card and both you and your service
-  provider purchased an ISDN line from the phone company.  For
-  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
-
-  This driver allows you to use an ISDN-card for networking
-  connections and as dialin/out device.  The isdn-tty's have a built
-  in AT-compatible modem emulator.  Network devices support autodial,
-  channel-bundling, callback and caller-authentication without having
-  a daemon running.  A reduced T.70 protocol is supported with tty's
-  suitable for German BTX.  On D-Channel, the protocols EDSS1
-  (Euro-ISDN) and 1TR6 (German style) are supported.  See
-  <file:Documentation/isdn/README> for more information.
-
-  If you want to compile the ISDN code as a module ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want), say M here and read <file:Documentation/modules.txt>.  The
-  module will be called isdn.o. If unsure, say N.
-
-Support synchronous PPP
-CONFIG_ISDN_PPP
-  Over digital connections such as ISDN, there is no need to
-  synchronize sender and recipient's clocks with start and stop bits
-  as is done over analog telephone lines. Instead, one can use
-  "synchronous PPP". Saying Y here will include this protocol. This
-  protocol is used by Cisco and Sun for example. So you want to say Y
-  here if the other end of your ISDN connection supports it. You will
-  need a special version of pppd (called ipppd) for using this
-  feature. See <file:Documentation/isdn/README.syncppp> and
-  <file:Documentation/isdn/syncPPP.FAQ> for more information.
-
-Support generic MP (RFC 1717)
-CONFIG_ISDN_MPP
-  With synchronous PPP enabled, it is possible to increase throughput
-  by bundling several ISDN-connections, using this protocol. See
-  <file:Documentation/isdn/README.syncppp> for more information.
-
-Use VJ-compression with synchronous PPP
-CONFIG_ISDN_PPP_VJ
-  This enables Van Jacobson header compression for synchronous PPP.
-  Say Y if the other end of the connection supports it.
-
-Support BSD compression
-CONFIG_ISDN_PPP_BSDCOMP
-  Support for the BSD-Compress compression method for PPP, which uses
-  the LZW compression method to compress each PPP packet before it is
-  sent over the wire. The machine at the other end of the PPP link
-  (usually your ISP) has to support the BSD-Compress compression
-  method as well for this to be useful. Even if they don't support it,
-  it is safe to say Y here.
-
-Support audio via ISDN
-CONFIG_ISDN_AUDIO
-  If you say Y here, the modem-emulator will support a subset of the
-  EIA Class 8 Voice commands. Using a getty with voice-support
-  (mgetty+sendfax by gert@greenie.muc.de with an extension, available
-  with the ISDN utility package for example), you will be able to use
-  your Linux box as an ISDN-answering machine. Of course, this must be
-  supported by the lowlevel driver also. Currently, the HiSax driver
-  is the only voice-supporting driver. See
-  <file:Documentation/isdn/README.audio> for more information.
-
-X.25 PLP on top of ISDN
-CONFIG_ISDN_X25
-  This feature provides the X.25 protocol over ISDN connections.
-  See <file:Documentation/isdn/README.x25> for more information
-  if you are thinking about using this.
-
-ISDN diversion services support
-CONFIG_ISDN_DIVERSION
-  This option allows you to use some supplementary diversion
-  services in conjunction with the HiSax driver on an EURO/DSS1
-  line.
-
-  Supported options are CD (call deflection), CFU (Call forward
-  unconditional), CFB (Call forward when busy) and CFNR (call forward
-  not reachable). Additionally the actual CFU, CFB and CFNR state may
-  be interrogated.
-
-  The use of CFU, CFB, CFNR and interrogation may be limited to some
-  countries. The keypad protocol is still not implemented. CD should
-  work in all countries if the service has been subscribed to.
-
-  Please read the file <file:Documentation/isdn/README.diversion>.
-
-ICN 2B and 4B support
-CONFIG_ISDN_DRV_ICN
-  This enables support for two kinds of ISDN-cards made by a German
-  company called ICN.  2B is the standard version for a single ISDN
-  line with two B-channels, 4B supports two ISDN lines.  For running
-  this card, additional firmware is necessary, which has to be
-  downloaded into the card using a utility which is distributed
-  separately.  See <file:Documentation/isdn/README> and
-  <file:Documentation/isdn/README.icn> for more
-  information.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called icn.o.
-
-isdnloop support
-CONFIG_ISDN_DRV_LOOP
-  This driver provides a virtual ISDN card. Its primary purpose is
-  testing of linklevel features or configuration without getting
-  charged by your service-provider for lots of phone calls.
-  You need will need the loopctrl utility from the latest isdn4k-utils
-  package to set up this driver.
-
-HiSax SiemensChipSet driver support
-CONFIG_ISDN_DRV_HISAX
-  This is a driver supporting the Siemens chipset on various
-  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
-  S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
-  compatibles).
-
-  HiSax is just the name of this driver, not the name of any hardware.
-
-  If you have a card with such a chipset, you should say Y here and
-  also to the configuration option of the driver for your particular
-  card, below.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called hisax.o.  See <file:Documentation/isdn/README.HiSax>
-  for more information on using this driver.
-
-HiSax Support for EURO/DSS1
-CONFIG_HISAX_EURO
-  Say Y or N according to the D-channel protocol which your local
-  telephone service company provides.
-
-  The call control protocol E-DSS1 is used in most European countries.
-  If unsure, say Y.
-
-Support for German chargeinfo
-CONFIG_DE_AOC
-  If you want that the HiSax hardware driver sends messages to the
-  upper level of the isdn code on each AOCD (Advice Of Charge, During
-  the call -- transmission of the fee information during a call) and
-  on each AOCE (Advice Of Charge, at the End of the call --
-  transmission of fee information at the end of the call), say Y here.
-  This works only in Germany.
-
-Disable sending complete
-CONFIG_HISAX_NO_SENDCOMPLETE
-  If you have trouble with some ugly exchanges or you live in
-  Australia select this option.
-
-Disable sending low layer compatibility
-CONFIG_HISAX_NO_LLC
-  If you have trouble with some ugly exchanges try to select this
-  option.
-
-Disable keypad protocol option
-CONFIG_HISAX_NO_KEYPAD
-  If you like to send special dial strings including * or # without
-  using the keypad protocol, select this option.
-
-HiSax Support for German 1TR6
-CONFIG_HISAX_1TR6
-  Say Y or N according to the D-channel protocol which your local
-  telephone service company provides.
-
-  1TR6 is an old call control protocol which was used in Germany
-  before E-DSS1 was established. Nowadays, all new lines in Germany
-  use E-DSS1.
-
-HiSax Support for US NI1
-CONFIG_HISAX_NI1
-  Enable this if you like to use ISDN in US on a NI1 basic rate
-  interface.
-
-Teles 16.0/8.0
-CONFIG_HISAX_16_0
-  This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
-  and many compatibles.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port/shmem settings.
-
-Teles 16.3 or PNP or PCMCIA
-CONFIG_HISAX_16_3
-  This enables HiSax support for the Teles ISDN-cards S0-16.3 the
-  Teles/Creatix PnP and the Teles PCMCIA.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-Teles PCI
-CONFIG_HISAX_TELESPCI
-  This enables HiSax support for the Teles PCI.
-  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-Teles S0Box
-CONFIG_HISAX_S0BOX
-  This enables HiSax support for the Teles/Creatix parallel port
-  S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
-  configure it.
-
-AVM A1 (Fritz)
-CONFIG_HISAX_AVM_A1
-  This enables HiSax support for the AVM A1 (aka "Fritz").
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-AVM PnP/PCI (Fritz!PnP/PCI)
-CONFIG_HISAX_FRITZPCI
-  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
-  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-AVM A1 PCMCIA (Fritz)
-CONFIG_HISAX_AVM_A1_PCMCIA
-  This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
-  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-Elsa cards
-CONFIG_HISAX_ELSA
-  This enables HiSax support for the Elsa Mircolink ISA cards, for the
-  Elsa Quickstep series cards and Elsa PCMCIA.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-ITK ix1-micro Revision 2
-CONFIG_HISAX_IX1MICROR2
-  This enables HiSax support for the ITK ix1-micro Revision 2 card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-Eicon.Diehl Diva cards
-CONFIG_HISAX_DIEHLDIVA
-  This enables HiSax support for the Eicon.Diehl Diva none PRO
-  versions passive ISDN cards.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-ASUSCOM ISA cards
-CONFIG_HISAX_ASUSCOM
-  This enables HiSax support for the AsusCom and their OEM versions
-  passive ISDN ISA cards.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-TELEINT cards
-CONFIG_HISAX_TELEINT
-  This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-HFC-S based cards
-CONFIG_HISAX_HFCS
-  This enables HiSax support for the HFC-S 2BDS0 based cards, like
-  teles 16.3c.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-Sedlbauer cards
-CONFIG_HISAX_SEDLBAUER
-  This enables HiSax support for the Sedlbauer passive ISDN cards.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using the different cards, a different D-channel protocol, or
-  non-standard IRQ/port settings.
-
-USR Sportster internal TA
-CONFIG_HISAX_SPORTSTER
-  This enables HiSax support for the USR Sportster internal TA card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-MIC card
-CONFIG_HISAX_MIC
-  This enables HiSax support for the ITH MIC card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-NETjet card
-CONFIG_HISAX_NETJET
-  This enables HiSax support for the NetJet from Traverse
-  Technologies.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-NETspider U card
-CONFIG_HISAX_NETJET_U
-  This enables HiSax support for the Netspider U interface ISDN card
-  from Traverse Technologies.
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-Niccy PnP/PCI card
-CONFIG_HISAX_NICCY
-  This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-Siemens I-Surf card
-CONFIG_HISAX_ISURF
-  This enables HiSax support for the Siemens I-Talk/I-Surf card with
-  ISAR chip.
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-HST Saphir card
-CONFIG_HISAX_HSTSAPHIR
-  This enables HiSax support for the HST Saphir card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-Telekom A4T card
-CONFIG_HISAX_BKM_A4T
-  This enables HiSax support for the Telekom A4T card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-Scitel Quadro card
-CONFIG_HISAX_SCT_QUADRO
-  This enables HiSax support for the Scitel Quadro card.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-Gazel cards
-CONFIG_HISAX_GAZEL
-  This enables HiSax support for the Gazel cards.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-HFC PCI-Bus cards
-CONFIG_HISAX_HFC_PCI
-  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
-
-  For more informations see under
-  <file:Documentation/isdn/README.hfc-pci>.
-
-Winbond W6692 based cards
-CONFIG_HISAX_W6692
-  This enables HiSax support for Winbond W6692 based PCI ISDN cards.
-
-  See <file:Documentation/isdn/README.HiSax> on how to configure it
-  using a different D-channel protocol, or non-standard IRQ/port
-  settings.
-
-HFC-S+, HFC-SP, HFC-PCMCIA cards
-CONFIG_HISAX_HFC_SX
-  This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
-  cards. This code is not finished yet.
-
-Am7930
-CONFIG_HISAX_AMD7930
-  This enables HiSax support for the AMD7930 chips on some SPARCs.
-  This code is not finished yet.
-
-HiSax debugging
-CONFIG_HISAX_DEBUG
-  This enables debugging code in the new-style HiSax drivers, i.e.
-  the ST5481 USB driver currently. 
-  If in doubt, say yes.
-
-ELSA PCMCIA MicroLink cards
-CONFIG_HISAX_ELSA_CS
-  This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
-  card.
-
-Sedlbauer PCMCIA cards
-CONFIG_HISAX_SEDLBAUER_CS
-  This enables the PCMCIA client driver for the Sedlbauer Speed Star
-  and Speed Star II cards.
-
-ST5481 USB ISDN adapter
-CONFIG_HISAX_ST5481
-  This enables the driver for ST5481 based USB ISDN adapters,
-  e.g. the BeWan Gazel 128 USB
-
-PCBIT-D support
-CONFIG_ISDN_DRV_PCBIT
-  This enables support for the PCBIT ISDN-card.  This card is
-  manufactured in Portugal by Octal.  For running this card,
-  additional firmware is necessary, which has to be downloaded into
-  the card using a utility which is distributed separately.  See
-  <file:Documentation/isdn/README> and
-  <file:Documentation/isdn/README.pcbit> for more information.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called pcbit.o.
-
-Spellcaster support
-CONFIG_ISDN_DRV_SC
-  This enables support for the Spellcaster BRI ISDN boards.  This
-  driver currently builds only in a modularized version ( = code which
-  can be inserted in and removed from the running kernel whenever you
-  want, details in <file:Documentation/modules.txt>); the module will
-  be called sc.o.  See <file:Documentation/isdn/README.sc> and
-  <http://www.spellcast.com/> for more information.
-
-Eicon active card support
-CONFIG_ISDN_DRV_EICON
-  Say Y here if you have an Eicon active ISDN card. In order to use
-  this card, additional firmware is necessary, which has to be loaded
-  into the card using the eiconctrl utility which is part of the
-  latest isdn4k-utils package. Please read the file
-  <file:Documentation/isdn/README.eicon> for more information.
-
-Legacy Eicon driver
-CONFIG_ISDN_DRV_EICON_OLD
-  Say Y here to use your Eicon active ISDN card with ISDN4Linux
-  isdn module.
-
-Eicon PCI DIVA Server BRI/PRI/4BRI support
-CONFIG_ISDN_DRV_EICON_PCI
-  Say Y here if you have an Eicon Diva Server (BRI/PRI/4BRI) ISDN
-  card.  Please read <file:Documentation/isdn/README.eicon> for more
-  information.
-
-Eicon old-type (S,SX,SCOM,Quadro,S2M) card support
-CONFIG_ISDN_DRV_EICON_ISA
-  Say Y here if you have an old-type Eicon active ISDN card. In order
-  to use this card, additional firmware is necessary, which has to be
-  loaded into the card using the eiconctrl utility which is part of
-  the latest isdn4k-utils package. Please read the file
-  <file:Documentation/isdn/README.eicon> for more information.
-
-Eicon driver type standalone
-CONFIG_ISDN_DRV_EICON_DIVAS
-  Enable this option if you want the eicon driver as standalone
-  version with no interface to the ISDN4Linux isdn module. If you
-  say Y here, the eicon module only supports the Diva Server PCI
-  cards and will provide its own IDI interface. You should say N
-  here.
-
-Support AT-Fax Class 1 and 2 commands
-CONFIG_ISDN_TTY_FAX
-  If you say Y here, the modem-emulator will support a subset of the
-  Fax Class 1 and 2 commands. Using a getty with fax-support
-  (mgetty+sendfax, hylafax), you will be able to use your Linux box as
-  an ISDN-fax-machine. This must be supported by the lowlevel driver
-  also. See <file:Documentation/isdn/README.fax> for more information.
-
-CAPI2.0 support
-CONFIG_ISDN_CAPI
-  This provides the CAPI (Common ISDN Application Programming
-  Interface, a standard making it easy for programs to access ISDN
-  hardware, see <http://www.capi.org/>.  This is needed for AVM's set
-  of active ISDN controllers like B1, T1, M1.
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The modules will be called capi.o and kernelcapi.o. If you want to
-  compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-CAPI2.0 /dev/capi20 support
-CONFIG_ISDN_CAPI_CAPI20
-  This option will provide the CAPI 2.0 interface to userspace
-  applications via /dev/capi20. Applications should use the
-  standardized libcapi20 to access this functionality.  You should say
-  Y/M here.
-
-CAPI2.0 Middleware support
-CONFIG_ISDN_CAPI_MIDDLEWARE
-  This option will enhance the capabilities of the /dev/capi20
-  interface.  It will provide a means of moving a data connection,
-  established via the usual /dev/capi20 interface to a special tty
-  device.  If you want to use pppd with pppdcapiplugin to dial up to
-  your ISP, say Y here.
-
-CAPI2.0 filesystem support
-CONFIG_ISDN_CAPI_CAPIFS
-  This option provides a special file system, similar to /dev/pts with
-  device nodes for the special ttys established by using the
-  middleware extension above. If you want to use pppd with
-  pppdcapiplugin to dial up to your ISP, say Y here.
-
-CAPI2.0 capidrv interface support
-CONFIG_ISDN_CAPI_CAPIDRV
-  This option provides the glue code to hook up CAPI driven cards to
-  the legacy isdn4linux link layer.  If you have a card which is
-  supported by a CAPI driver, but still want to use old features like
-  ippp interfaces or ttyI emulation, say Y/M here.
-
-AVM B1 ISA support
-CONFIG_ISDN_DRV_AVMB1_B1ISA
-  Enable support for the ISA version of the AVM B1 card.
-
-AVM B1 PCI support
-CONFIG_ISDN_DRV_AVMB1_B1PCI
-  Enable support for the PCI version of the AVM B1 card.
-
-AVM B1 PCI V4 support
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-  Enable support for the V4 version of AVM B1 PCI card.
-
-AVM T1/T1-B ISA support
-CONFIG_ISDN_DRV_AVMB1_T1ISA
-  Enable support for the AVM T1 T1B card.
-  Note: This is a PRI card and handle 30 B-channels.
-
-AVM B1/M1/M2 PCMCIA support
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
-  Enable support for the PCMCIA version of the AVM B1 card.
-
-AVM B1/M1/M2 PCMCIA cs module
-CONFIG_ISDN_DRV_AVMB1_AVM_CS
-  Enable the PCMCIA client driver for the AVM B1/M1/M2
-  PCMCIA cards.
-
-AVM T1/T1-B PCI support
-CONFIG_ISDN_DRV_AVMB1_T1PCI
-  Enable support for the AVM T1 T1B card.
-  Note: This is a PRI card and handle 30 B-channels.
-
-AVM C4/C2 support
-CONFIG_ISDN_DRV_AVMB1_C4
-  Enable support for the AVM C4/C2 PCI cards.
-  These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-Verbose reason code reporting (kernel size +=7K)
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
-  If you say Y here, the AVM B1 driver will give verbose reasons for
-  disconnecting. This will increase the size of the kernel by 7 KB. If
-  unsure, say Y.
-
-IBM Active 2000 support
-CONFIG_ISDN_DRV_ACT2000
-  Say Y here if you have an IBM Active 2000 ISDN card. In order to use
-  this card, additional firmware is necessary, which has to be loaded
-  into the card using a utility which is part of the latest
-  isdn4k-utils package. Please read the file
-  <file:Documentation/isdn/README.act2000> for more information.
-
-Auvertech TurboPAM support
-CONFIG_ISDN_DRV_TPAM
-  This enables support for the Auvertech TurboPAM ISDN-card.
-  For running this card, additional firmware is necessary, which has
-  to be downloaded into the card using a utility which is distributed
-  separately from the Auvertech's web site: <http://www.auvertech.fr/>.
-
-  Please redirect all support questions to support@auvertech.fr.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called tpam.o.
-
-Hypercope HYSDN cards (Champ, Ergo, Metro) support (module)
-CONFIG_HYSDN
-  Say Y here if you have one of Hypercope's active PCI ISDN cards
-  Champ, Ergo and Metro. You will then get a module called hysdn.o.
-  Please read the file <file:Documentation/isdn/README.hysdn> for more
-  information.
-
-HYSDN CAPI 2.0 support
-CONFIG_HYSDN_CAPI
-  Say Y here if you like to use Hypercope's CAPI 2.0 interface.
-
-Support for SUN4 machines (disables SUN4[CDM] support)
-CONFIG_SUN4
-  Say Y here if, and only if, your machine is a Sun4. Note that
-  a kernel compiled with this option will run only on Sun4.
-  (And the current version will probably work only on sun4/330.)
-
-SPARC ESP SCSI support
-CONFIG_SCSI_SUNESP
-  This is the driver for the Sun ESP SCSI host adapter. The ESP
-  chipset is present in most SPARC SBUS-based computers.
-
-  This support is also available as a module called esp.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-PTI Qlogic, ISP Driver
-CONFIG_SCSI_QLOGICPTI
-  This driver supports SBUS SCSI controllers from PTI or QLogic. These
-  controllers are known under Solaris as qpti and in the openprom as
-  PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
-  driven by a different driver.
-
-  This support is also available as a module called qlogicpti.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Sun PROM console
-CONFIG_PROM_CONSOLE
-  Say Y to build a console driver for Sun machines that uses the
-  terminal emulation built into their console PROMS.
-
-/dev/openprom device support
-CONFIG_SUN_OPENPROMIO
-  This driver provides user programs with an interface to the SPARC
-  PROM device tree. The driver implements a SunOS-compatible
-  interface and a NetBSD-compatible interface.
-
-  If you want to compile this as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M and read <file:Documentation/modules.txt>. If unsure, say Y.
-
-Openprom tree appears in /proc/openprom
-CONFIG_SUN_OPENPROMFS
-  If you say Y, the OpenPROM device tree will be available as a
-  virtual file system, which you can mount to /proc/openprom by "mount
-  -t openpromfs none /proc/openprom".
-
-  If you want to compile the /proc/openprom support as a module ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want), say M here and read
-  <file:Documentation/modules.txt>.
-  The module will be called openpromfs.o.  If unsure, say M.
-
-Kernel support for Linux/Sparc 32bit binary compatibility
-CONFIG_SPARC32_COMPAT
-  This allows you to run 32-bit binaries on your Ultra.
-  Everybody wants this; say Y.
-
-Kernel support for 32-bit ELF binaries
-CONFIG_BINFMT_ELF32
-  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
-  Everybody wants this; say Y.
-
-Kernel support for 32-bit (ie. SunOS) a.out binaries
-CONFIG_BINFMT_AOUT32
-  This allows you to run 32-bit a.out format binaries on your Ultra.
-  If you want to run SunOS binaries (see SunOS binary emulation below)
-  or other a.out binaries, say Y. If unsure, say N.
-
-SunOS binary emulation
-CONFIG_SUNOS_EMUL
-  This allows you to run most SunOS binaries.  If you want to do this,
-  say Y here and place appropriate files in /usr/gnemul/sunos. See
-  <http://www.ultralinux.org/faq.html> for more information.  If you
-  want to run SunOS binaries on an Ultra you must also say Y to
-  "Kernel support for 32-bit a.out binaries" above.
-
-Mostek real time clock support
-CONFIG_SUN_MOSTEK_RTC
-  The Mostek RTC chip is used on all known Sun computers except
-  some JavaStations. For a JavaStation you need to say Y both here
-  and to "Enhanced Real Time Clock Support".
-
-  Say Y here unless you are building a special purpose kernel.
-
-OBP Flash Device support
-CONFIG_OBP_FLASH
-  The OpenBoot PROM on Ultra systems is flashable. If you want to be
-  able to upgrade the OBP firmware, say Y here.
-
-JavaStation OS Flash SIMM
-CONFIG_SUN_JSFLASH
-  If you say Y here, you will be able to boot from your JavaStation's
-  Flash memory.
-
-Siemens SAB82532 serial support
-CONFIG_SAB82532
-  This driver supports the serial ports on newer (PCI) Ultra systems.
-  Say Y if you want to be able to use your serial ports.
-
-Videopix Frame Grabber
-CONFIG_SUN_VIDEOPIX
-  Say Y here to support the Videopix Frame Grabber from Sun
-  Microsystems, commonly found on SPARCstations.  This card, which is
-  based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and
-  SVIDEO signals.
-
-Sun bidirectional parallel port support
-CONFIG_SUN_BPP
-  Say Y here to support Sun's obsolete variant of IEEE1284
-  bidirectional parallel port protocol as /dev/bppX.  Can be built on
-  x86 machines.
-
-Aurora Multiboard 1600se
-CONFIG_SUN_AURORA
-  The Aurora Multiboard is a multi-port high-speed serial controller.
-  If you have one of these, say Y.
-
-Tadpole TS102 Microcontroller support
-CONFIG_TADPOLE_TS102_UCTRL
-  Say Y here to directly support the TS102 Microcontroller interface
-  on the Tadpole Sparcbook 3.  This device handles power-management
-  events, and can also notice the attachment/detachment of external
-  monitors and mice.
-
-Audio support
-CONFIG_SPARCAUDIO
-  This driver provides support for the build-in sound devices on most
-  Sun machines. If you want to be able to use this, select this option
-  and one or more of the lowlevel drivers below. See
-  <http://www.dementia.org/~shadow/sparcaudio.html> for more
-  information.
-
-AMD7930 Lowlevel Driver
-CONFIG_SPARCAUDIO_AMD7930
-  This driver supports the AMD 7930 chip found on sun4c, 4/6xx, and
-  SparcClassic systems.
-
-CS4231 Lowlevel Driver
-CONFIG_SPARCAUDIO_CS4231
-  This driver supports the Crystal Semiconductor CS4231 chip found on
-  the SS4, SS5, and Ultras.
-
-DBRI Lowlevel Driver
-CONFIG_SPARCAUDIO_DBRI
-  This driver supports the DBRI audio interface found on the SS10,
-  SS20, Sparcbook 3, and Voyager systems.
-
-Dummy Lowlevel Driver
-CONFIG_SPARCAUDIO_DUMMY
-  This is a pseudo-driver used for debugging and testing the
-  sparcaudio subsystem. Say N unless you want to work on this
-  subsystem.
-
-Sparc hardware
-CONFIG_PARPORT_SUNBPP
-  This driver provides support for the bidirectional parallel port
-  found on many Sun machines. Note that many of the newer Ultras
-  actually have pc style hardware instead.
-
-/proc/hardware support
-CONFIG_PROC_HARDWARE
-  Say Y here to support the /proc/hardware file, which gives you
-  access to information about the machine you're running on,
-  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-  and memory size.
-
-Bluetooth subsystem support
-CONFIG_BLUEZ
-  Bluetooth is low-cost, low-power, short-range wireless technology.
-  It was designed as a replacement for cables and other short-range
-  technologies like IrDA.  Bluetooth operates in personal area range
-  that typically extends up to 10 meters.  More information about
-  Bluetooth can be found at <http://www.bluetooth.com/>.
-
-  Linux Bluetooth subsystem consist of several layers:
-               HCI Core (device and connection manager, scheduler)
-               HCI Device drivers (interface to the hardware)
-               L2CAP Module (L2CAP protocol)
-
-  Say Y here to enable Linux Bluetooth support and to build HCI Core
-  layer.
-
-  To use Linux Bluetooth subsystem, you will need several user-space
-  utilities like hciconfig and hcid.  These utilities and updates to
-  Bluetooth kernel modules are provided in the BlueZ package.
-  For more information, see <http://bluez.sourceforge.net/>.
-
-  If you want to compile HCI Core as module (hci.o) say M here.
-
-L2CAP protocol support
-CONFIG_BLUEZ_L2CAP
-  L2CAP (Logical Link Control and Adaptation Protocol) provides
-  connection oriented and connection-less data transport.  L2CAP
-  support is required for most Bluetooth applications.
-
-  Say Y here to compile L2CAP support into the kernel or say M to
-  compile it as module (l2cap.o).
-
-HCI UART driver
-CONFIG_BLUEZ_HCIUART
-  Bluetooth HCI UART driver.
-  This driver is required if you want to use Bluetooth devices with
-  serial port interface.
-
-  Say Y here to compile support for Bluetooth UART devices into the
-  kernel or say M to compile it as module (hci_uart.o).
-
-HCI USB driver
-CONFIG_BLUEZ_HCIUSB
-  Bluetooth HCI USB driver.
-  This driver is required if you want to use Bluetooth devices with
-  USB interface.
-
-  Say Y here to compile support for Bluetooth USB devices into the
-  kernel or say M to compile it as module (hci_usb.o).
-
-HCI VHCI virtual HCI device driver
-CONFIG_BLUEZ_HCIVHCI
-  Bluetooth Virtual HCI device driver.
-  This driver is required if you want to use HCI Emulation software.
-
-  Say Y here to compile support for virtual HCI devices into the
-  kernel or say M to compile it as module (hci_vhci.o).
-
-# The following options are for Linux when running on the Hitachi
-# SuperH family of RISC microprocessors.
-
-SuperH RTC support
-CONFIG_SH_RTC
-  Selecting this option will allow the Linux kernel to emulate
-  PC's RTC.
-
-  If unsure, say N.
-
-SuperH DMAC support
-CONFIG_SH_DMA
-  Selecting this option will provide same API as PC's Direct Memory
-  Access Controller(8237A) for SuperH DMAC.
-
-  If unsure, say N.
-
-# Choice: cf_area
-CompactFlash Connection Area
-CONFIG_CF_AREA5
-  If your board has "Directly Connected" CompactFlash, You should
-  select the area where your CF is connected to.
-  
-  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-  - "Area6" if it is connected to Area 6 (0x18000000)
-
-  "Area6" will work for most boards. For ADX, select "Area5".
-
-#
-# m68k-specific kernel options
-# Documented by Chris Lawrence <mailto:quango@themall.net> et al.
-#
-Amiga support
-CONFIG_AMIGA
-  This option enables support for the Amiga series of computers. If
-  you plan to use this kernel on an Amiga, say Y here and browse the
-  material available in <file:Documentation/m68k>; otherwise say N.
-
-Commodore A2232 serial support
-CONFIG_A2232
-  This option supports the 2232 7-port serial card shipped with the
-  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
-  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
-  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
-  ports were connected with 8 pin DIN connectors on the card bracket,
-  for which 8 pin to DB25 adapters were supplied. The card also had
-  jumpers internally to toggle various pinning configurations.
-
-  This driver can be built as a module; but then "generic_serial.o"
-  will also be built as a module. This has to be loaded before
-  "ser_a2232.o". If you want to do this, answer M here and read
-  "<file:Documentation/modules.txt>".
-
-A4000T SCSI support
-CONFIG_A4000T_SCSI
-  Support for the NCR53C710 SCSI controller on the Amiga 4000T.
-
-A4091 SCSI support
-CONFIG_A4091_SCSI
-  Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
-  (1993).  Very obscure -- the 4091 was part of an Amiga 4000 upgrade
-  plan at the time the Amiga business was sold to DKB.
-
-Atari support
-CONFIG_ATARI
-  This option enables support for the 68000-based Atari series of
-  computers (including the TT, Falcon and Medusa). If you plan to use
-  this kernel on an Atari, say Y here and browse the material
-  available in <file:Documentation/m68k>; otherwise say N.
-
-Hades support
-CONFIG_HADES
-  This option enables support for the Hades Atari clone. If you plan
-  to use this kernel on a Hades, say Y here; otherwise say N.
-
-Macintosh support
-CONFIG_MAC
-  This option enables support for the Apple Macintosh series of
-  computers (yes, there is experimental support now, at least for part
-  of the series).
-
-  Say N unless you're willing to code the remaining necessary support.
-  ;)
-
-HP9000/300 support
-CONFIG_HP300
-  This option enables support for the HP9000/300 series of
-  workstations. Support for these machines is still very experimental.
-  If you plan to try to use the kernel on such a machine say Y here.
-  Everybody else says N.
-
-Q40/Q60 support
-CONFIG_Q40
-  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-  manufactured in Germany.  There is an official Q40 home page at
-  <http://www.q40.de/>.  This option enables support for the Q40 and
-  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-  emulation.
-
-Sun 3 support
-CONFIG_SUN3
-  This option enables support for the Sun 3 series of workstations.
-  Currently, only the Sun 3/80 is supported within the Sun 3x family.
-  You will also want to enable 68030 support.  General Linux
-  information on the Sun 3x series (now discontinued) is at
-  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-  If you don't want to compile a kernel for a Sun 3, say N.
-
-Sun 3X support
-CONFIG_SUN3X
-  This option enables support for the Sun 3x series of workstations.
-  Be warned that this support is very experimental. You will also want
-  to say Y to 68020 support and N to the other processors below.
-  General Linux information on the Sun 3x series (now discontinued)
-  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-  If you don't want to compile a kernel for a Sun 3x, say N.
-
-Sun3x builtin serial support
-CONFIG_SUN3X_ZS
-  ZS refers to a type of asynchronous serial port built in to the Sun3
-  and Sun3x workstations; if you have a Sun 3, you probably have
-  these.  Say 'Y' to support ZS ports directly.  This option must be
-  enabled in order to support the
-  keyboard and mouse ports.
-
-Sun keyboard support
-CONFIG_SUN_KEYBOARD
-  Say Y here to support the keyboard found on Sun 3 and 3x
-  workstations.  It can also be used support Sun Type-5 keyboards
-  through an adaptor.  See
-  <http://www.suse.cz/development/input/adapters.html> and
-  <http://sourceforge.net/projects/linuxconsole/> for details on the
-  latter.
-
-68020 support
-CONFIG_M68020
-  If you anticipate running this kernel on a computer with a MC68020
-  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-  Sun 3, which provides its own version.
-
-68030 support
-CONFIG_M68030
-  If you anticipate running this kernel on a computer with a MC68030
-  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-  work, as it does not include an MMU (Memory Management Unit).
-
-68040 support
-CONFIG_M68040
-  If you anticipate running this kernel on a computer with a MC68LC040
-  or MC68040 processor, say Y. Otherwise, say N. Note that an
-  MC68EC040 will not work, as it does not include an MMU (Memory
-  Management Unit).
-
-68060 support
-CONFIG_M68060
-  If you anticipate running this kernel on a computer with a MC68060
-  processor, say Y. Otherwise, say N.
-
-Math emulation support
-CONFIG_M68KFPU_EMU
-  At some point in the future, this will cause floating-point math
-  instructions to be emulated by the kernel on machines that lack a
-  floating-point math coprocessor.  Thrill-seekers and chronically
-  sleep-deprived psychotic hacker types can say Y now, everyone else
-  should probably wait a while.
-
-Math emulation only kernel
-CONFIG_M68KFPU_EMU_ONLY
-  This option prevents any floating-point instructions from being
-  compiled into the kernel, thereby the kernel doesn't save any
-  floating point context anymore during task switches, so this
-  kernel will only be usable on machines without a floating-point
-  math coprocessor. This makes the kernel a bit faster as no tests
-  needs to be executed whether a floating-point instruction in the
-  kernel should be executed or not.
-
-Math emulation extra precision
-CONFIG_M68KFPU_EMU_EXTRAPREC
-  The fpu uses normally a few bit more during calculations for
-  correct rounding, the emulator can (often) do the same but this
-  extra calculation can cost quite some time, so you can disable
-  it here. The emulator will then "only" calculate with a 64 bit
-  mantissa and round slightly incorrect, what is more then enough
-  for normal usage.
-
-Advanced configuration options
-CONFIG_ADVANCED
-  This gives you access to some advanced options for the CPU. The
-  defaults should be fine for most users, but these options may make
-  it possible for you to improve performance somewhat if you know what
-  you are doing.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about these options.
-
-  Most users should say N to this question.
-
-Use one physical chunk of memory only
-CONFIG_SINGLE_MEMORY_CHUNK
-  Ignore all but the first contiguous chunk of physical memory for VM
-  purposes.  This will save a few bytes kernel size and may speed up
-  some operations.  Say N if not sure.
-
-Use read-modify-write instructions
-CONFIG_RMW_INSNS
-  This allows to use certain instructions that work with indivisible
-  read-modify-write bus cycles. While this is faster than the
-  workaround of disabling interrupts, it can conflict with DMA
-  ( = direct memory access) on many Amiga systems, and it is also said
-  to destabilize other machines. It is very likely that this will
-  cause serious problems on any Amiga or Atari Medusa if set. The only
-  configuration where it should work are 68030-based Ataris, where it
-  apparently improves performance. But you've been warned! Unless you
-  really know what you are doing, say N. Try Y only if you're quite
-  adventurous.
-
-Amiga Zorro (AutoConfig) bus support
-CONFIG_ZORRO
-  This enables support for the Zorro bus in the Amiga. If you have
-  expansion cards in your Amiga that conform to the Amiga
-  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-  expansion cards that do not fit in the Zorro slots but fit in e.g.
-  the CPU slot may fall in this category, so you have to say Y to let
-  Linux use these.
-
-Zorro device name database
-CONFIG_ZORRO_NAMES
-  By default, the kernel contains a database of all known Zorro device
-  names to make the information in /proc/iomem comprehensible to the
-  user. This database increases the size of the kernel image by about
-  15KB, but it gets freed after the system boots up, so it doesn't
-  take up kernel memory. Anyway, if you are building an installation
-  floppy or kernel for an embedded system where kernel image size
-  really matters, you can disable this feature and you'll get device
-  ID numbers instead of names.
-
-  When in doubt, say Y.
-
-Amiga 1200/600 PCMCIA support
-CONFIG_AMIGA_PCMCIA
-  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-Hisoft Whippet PCMCIA serial support
-CONFIG_WHIPPET_SERIAL
-  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-  is no listing for the Whippet in their Amiga section.
-
-Amiga Zorro II ramdisk support
-CONFIG_AMIGA_Z2RAM
-  This enables support for using Chip RAM and Zorro II RAM as a
-  ramdisk or as a swap partition. Say Y if you want to include this
-  driver in the kernel. This driver is also available as a module
-  ( = code which can be inserted in and removed from the running
-  kernel whenever you want). The module is called z2ram.o. If you want
-  to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Support for ST-RAM as swap space
-CONFIG_STRAM_SWAP
-  Some Atari 68k macines (including the 520STF and 1020STE) divide
-  their addressible memory into ST and TT sections.  The TT section
-  (up to 512MB) is the main memory; the ST section (up to 4MB) is
-  accessible to the built-in graphics board, runs slower, and is
-  present mainly for backward compatibility with older machines.
-
-  This enables support for using (parts of) ST-RAM as swap space,
-  instead of as normal system memory. This can first enhance system
-  performance if you have lots of alternate RAM (compared to the size
-  of ST-RAM), because executable code always will reside in faster
-  memory. ST-RAM will remain as ultra-fast swap space. On the other
-  hand, it allows much improved dynamic allocations of ST-RAM buffers
-  for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
-  sound). The probability that such allocations at module load time
-  fail is drastically reduced.
-
-ST-RAM statistics in /proc
-CONFIG_STRAM_PROC
-  Say Y here to report ST-RAM usage statistics in /proc/stram.  See
-  the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
-  uses.
-
-Atari ACSI support
-CONFIG_ATARI_ACSI
-  This enables support for the Atari ACSI interface. The driver
-  supports hard disks and CD-ROMs, which have 512-byte sectors, or can
-  be switched to that mode. Due to the ACSI command format, only disks
-  up to 1 GB are supported. Special support for certain ACSI to SCSI
-  adapters, which could relax that, isn't included yet. The ACSI
-  driver is also the basis for certain other drivers for devices
-  attached to the ACSI bus: Atari SLM laser printer, BioNet-100
-  Ethernet, and PAMsNet Ethernet. If you want to use one of these
-  devices, you need ACSI support, too.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called acsi.o.
-
-Probe all LUNs on each ACSI device
-CONFIG_ACSI_MULTI_LUN
-  If you have a ACSI device that supports more than one LUN (Logical
-  Unit Number), e.g. a CD jukebox, you should say Y here so that all
-  will be found by the ACSI driver. An ACSI device with multiple LUNs
-  acts logically like multiple ACSI devices. The vast majority of ACSI
-  devices have only one LUN, and so most people can say N here and
-  should in fact do so, because it is safer.
-
-Atari SLM laser printer support
-CONFIG_ATARI_SLM
-  If you have an Atari SLM laser printer, say Y to include support for
-  it in the kernel. Otherwise, say N. This driver is also available as
-  a module ( = code which can be inserted in and removed from the
-  running kernel whenever you want). The module will be called
-  acsi_slm.o. Be warned: the driver needs much ST-RAM and can cause
-  problems due to that fact!
-
-A3000 WD33C93A support
-CONFIG_A3000_SCSI
-  If you have an Amiga 3000 and have SCSI devices connected to the
-  built-in SCSI controller, say Y. Otherwise, say N. This driver is
-  also available as a module ( = code which can be inserted in and
-  removed from the running kernel whenever you want). The module is
-  called wd33c93.o. If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.
-
-A2091 WD33C93A support
-CONFIG_A2091_SCSI
-  If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
-  say N. This driver is also available as a module ( = code which can
-  be inserted in and removed from the running kernel whenever you
-  want). The module is called wd33c93.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-GVP Series II WD33C93A support
-CONFIG_GVP11_SCSI
-  If you have a Great Valley Products Series II SCSI controller,
-  answer Y. Also say Y if you have a later model of GVP SCSI
-  controller (such as the GVP A4008 or a Combo board). Otherwise,
-  answer N. This driver does NOT work for the T-Rex series of
-  accelerators from TekMagic and GVP-M.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module will be called gvp11.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-CyberStorm SCSI support
-CONFIG_CYBERSTORM_SCSI
-  If you have an Amiga with an original (MkI) Phase5 Cyberstorm
-  accelerator board and the optional Cyberstorm SCSI controller,
-  answer Y. Otherwise, say N.
-
-CyberStorm II SCSI support
-CONFIG_CYBERSTORMII_SCSI
-  If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
-  and the optional Cyberstorm SCSI controller, say Y. Otherwise,
-  answer N.
-
-Blizzard 2060 SCSI support
-CONFIG_BLZ2060_SCSI
-  If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
-  and want to use the onboard SCSI controller, say Y. Otherwise,
-  answer N.
-
-Blizzard 1230IV/1260 SCSI support
-CONFIG_BLZ1230_SCSI
-  If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
-  1260 accelerator, and the optional SCSI module, say Y. Otherwise,
-  say N.
-
-Blizzard PowerUP 603e+ SCSI support
-CONFIG_BLZ603EPLUS_SCSI
-  If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
-  accelerator, say Y. Otherwise, say N.
-
-Fastlane SCSI support
-CONFIG_FASTLANE_SCSI
-  If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
-  one in the near future, say Y to this question. Otherwise, say N.
-
-BSC Oktagon SCSI support
-CONFIG_OKTAGON_SCSI
-  If you have the BSC Oktagon SCSI disk controller for the Amiga, say
-  Y to this question.  If you're in doubt about whether you have one,
-  see the picture at
-  <http://amiga.multigraph.com/photos/oktagon.html>.
-
-Atari native SCSI support
-CONFIG_ATARI_SCSI
-  If you have an Atari with built-in NCR5380 SCSI controller (TT,
-  Falcon, ...) say Y to get it supported. Of course also, if you have
-  a compatible SCSI controller (e.g. for Medusa).  This driver is also
-  available as a module ( = code which can be inserted in and removed
-  from the running kernel whenever you want).  The module is called
-  atari_scsi.o.  If you want to compile it as a module, say M here and
-  read <file:Documentation/modules.txt>.  This driver supports both
-  styles of NCR integration into the system: the TT style (separate
-  DMA), and the Falcon style (via ST-DMA, replacing ACSI).  It does
-  NOT support other schemes, like in the Hades (without DMA).
-
-Long delays for Toshiba CD-ROMs
-CONFIG_ATARI_SCSI_TOSHIBA_DELAY
-  This option increases the delay after a SCSI arbitration to
-  accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
-  use a Toshiba CD-ROM drive; otherwise, the option is not needed and
-  would impact performance a bit, so say N.
-
-Reset SCSI-devices at boottime
-CONFIG_ATARI_SCSI_RESET_BOOT
-  Reset the devices on your Atari whenever it boots.  This makes the
-  boot process fractionally longer but may assist recovery from errors
-  that leave the devices with SCSI operations partway completed.
-
-Hades SCSI DMA emulator
-CONFIG_TT_DMA_EMUL
-  This option enables code which emulates the TT SCSI DMA chip on the
-  Hades. This increases the SCSI transfer rates at least ten times
-  compared to PIO transfers.
-
-Ariadne support
-CONFIG_ARIADNE
-  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
-  Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module is called ariadne.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-Ariadne II and X-Surf support
-CONFIG_ARIADNE2
-  This driver is for the Village Tronic Ariadne II and the Individual
-  Computers X-Surf Ethernet cards. If you have such a card, say Y.
-  Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called ariadne2.o. If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-A2065 support
-CONFIG_A2065
-  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
-  say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module is called a2065.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Hydra support
-CONFIG_HYDRA
-  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module is called hydra.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Sun3 NCR5380 SCSI
-CONFIG_SUN3_SCSI
-  This option will enable support for the OBIO (onboard io) NCR5380
-  SCSI controller found in the Sun 3/50 and 3/60.  Note that this
-  driver does not provide support for VME SCSI boards.
-  General Linux information on the Sun 3 series (now discontinued)
-  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-Sun3x ESP SCSI driver
-CONFIG_SUN3X_ESP
-  The ESP was an on-board SCSI controller used on Sun 3/80
-  machines.  Say Y here to compile in support for it.
-
-PCMCIA NE2000 and compatibles support
-CONFIG_APNE
-  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
-  say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). The module is called apne.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Atari Lance support
-CONFIG_ATARILANCE
-  Say Y to include support for several Atari Ethernet adapters based
-  on the AMD Lance chipset: RieblCard (with or without battery), or
-  PAMCard VME (also the version by Rhotron, with different addresses).
-
-BioNet-100 support
-CONFIG_ATARI_BIONET
-  Say Y to include support for BioData's BioNet-100 Ethernet adapter
-  for the ACSI port. The driver works (has to work...) with a polled
-  I/O scheme, so it's rather slow :-(
-
-PAMsNet support
-CONFIG_ATARI_PAMSNET
-  Say Y to include support for the PAMsNet Ethernet adapter for the
-  ACSI port ("ACSI node"). The driver works (has to work...) with a
-  polled I/O scheme, so it's rather slow :-(
-
-Amiga mouse support
-CONFIG_AMIGAMOUSE
-  If you want to be able to use an Amiga mouse in Linux, say Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called amigamouse.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Atari mouse support
-CONFIG_ATARIMOUSE
-  If you want to be able to use an Atari mouse in Linux, say Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module is called atarimouse.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-Atari MFP serial support
-CONFIG_ATARI_MFPSER
-  If you like to use the MFP serial ports ("Modem1", "Serial1") under
-  Linux, say Y. The driver equally supports all kinds of MFP serial
-  ports and automatically detects whether Serial1 is available.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-  Note for Falcon users: You also have an MFP port, it's just not
-  wired to the outside... But you could use the port under Linux.
-
-Atari SCC serial support
-CONFIG_ATARI_SCC
-  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-  LAN) and like to use them under Linux, say Y. All built-in SCC's are
-  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-  two connectors for channel A (Serial2 and LAN), they are visible as
-  two separate devices.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Atari SCC serial DMA support
-CONFIG_ATARI_SCC_DMA
-  This enables DMA support for receiving data on channel A of the SCC.
-  If you have a TT you may say Y here and read
-  drivers/char/atari_SCC.README. All other users should say N here,
-  because only the TT has SCC-DMA, even if your machine keeps claiming
-  so at boot time.
-
-Atari MIDI serial support
-CONFIG_ATARI_MIDI
-  If you want to use your Atari's MIDI port in Linux, say Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Atari DSP56k Digital Signal Processor support
-CONFIG_ATARI_DSP56K
-  If you want to be able to use the DSP56001 in Falcons, say Y. This
-  driver is still experimental, and if you don't know what it is, or
-  if you don't have this processor, just say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Support for early boot text console
-CONFIG_BOOTX_TEXT
-  Say Y here to see progress messages from the boot firmware in text
-  mode. Requires either BootX or Open Firmware.
-
-Amiga builtin serial support
-CONFIG_AMIGA_BUILTIN_SERIAL
-  If you want to use your Amiga's built-in serial port in Linux,
-  answer Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-GVP IO-Extender support
-CONFIG_GVPIOEXT
-  If you want to use a GVP IO-Extender serial card in Linux, say Y.
-  Otherwise, say N.
-
-GVP IO-Extender parallel printer support
-CONFIG_GVPIOEXT_LP
-  Say Y to enable driving a printer from the parallel port on your
-  GVP IO-Extender card, N otherwise.
-
-GVP IO-Extender PLIP support
-CONFIG_GVPIOEXT_PLIP
-  Say Y to enable doing IP over the parallel port on your GVP
-  IO-Extender card, N otherwise.
-
-Multiface Card III serial support
-CONFIG_MULTIFACE_III_TTY
-  If you want to use a Multiface III card's serial port in Linux,
-  answer Y.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Amiga/Atari/PowerMac DMA sound support
-CONFIG_DMASOUND
-  Support built-in audio chips accessible by DMA on various machines
-  that have them.  Note that this symbol does not affect the kernel
-  directly; rather, it controls whether configuration questions
-  enabling DMA sound drivers for various specific machine
-  architectures will be used.
-
-Atari DMA sound support
-CONFIG_DMASOUND_ATARI
-  If you want to use the internal audio of your Atari in Linux, answer
-  Y to this question. This will provide a Sun-like /dev/audio,
-  compatible with the Linux/i386 sound system. Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-PowerMac DMA sound support
-CONFIG_DMASOUND_AWACS
-  If you want to use the internal audio of your PowerMac in Linux,
-  answer Y to this question. This will provide a Sun-like /dev/audio,
-  compatible with the Linux/i386 sound system. Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Amiga DMA sound support
-CONFIG_DMASOUND_PAULA
-  If you want to use the internal audio of your Amiga in Linux, answer
-  Y to this question. This will provide a Sun-like /dev/audio,
-  compatible with the Linux/i386 sound system. Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Q40 sound support
-CONFIG_DMASOUND_Q40
-  If you want to use the internal audio of your Q40 in Linux, answer
-  Y to this question. This will provide a Sun-like /dev/audio,
-  compatible with the Linux/i386 sound system. Otherwise, say N.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you
-  want). If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-HP DCA serial support
-CONFIG_HPDCA
-  If you want to use the internal "DCA" serial ports on an HP300
-  machine, say Y here.
-
-HP on-board LANCE support
-CONFIG_HPLANCE
-  If you want to use the builtin "LANCE" Ethernet controller on an
-  HP300 machine, say Y here.
-
-DIO bus support
-CONFIG_DIO
-  Say Y here to enable support for the "DIO" expansion bus used in
-  HP300 machines. If you are using such a system you almost certainly
-  want this.
-
-# Choice: ppctype
-Processor Type
-CONFIG_6xx
-  There are four types of PowerPC chips supported.  The more common
-  types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-  versions (821, 823, 850, 855, 860, 8260), the IBM embedded versions
-  (403 and 405) and the high end 64 bit Power processors (Power 3,
-  Power 4).  Unless you are building a kernel for one of the embedded
-  processor systems, or a 64 bit IBM RS/6000, choose 6xx.  Note that
-  the kernel runs in 32-bit mode even on 64-bit chips.  Also note that
-  because the 82xx family has a 603e core, specific support for that
-  chipset is asked later on.
-
-Motorola MPC8260 CPM support
-CONFIG_8260
-  The MPC8260 CPM (Communications Processor Module) is a typical
-  embedded CPU made by Motorola.  Selecting this option means that
-  you wish to build a kernel for a machine with specifically an 8260
-  for a CPU.
-
-  If in doubt, say N.
-
-# Choice: Machine type
-Oak
-CONFIG_OAK
-  Select Oak if you have an IBM 403GCX "Oak" Evaluation Board.
-
-  Select Walnut if you have an IBM 405GP "Walnut" Evaluation Board.
-
-  More information on these boards is available at:
-  <http://www.chips.ibm.com/products/powerpc/tools/evk_pn.html#GCX>.
-
-Walnut
-CONFIG_WALNUT
-  Select Walnut if you have an IBM 405GP "Walnut" Evaluation Board.
-
-Workarounds for PPC601 bugs
-CONFIG_PPC601_SYNC_FIX
-  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-  mean that extra synchronization instructions are required near
-  certain instructions, typically those that make major changes to the
-  CPU state.  These extra instructions reduce performance slightly.
-  If you say N here, these extra instructions will not be included,
-  resulting in a kernel which will run faster but may not run at all
-  on some systems with the PPC601 chip.
-
-  If in doubt, say Y here.
-
-8xx Cache (Copy-Back or Writethrough)
-CONFIG_8xx_COPYBACK
-  Saying Y here will cause the cache on an MPC8xx processor to be used
-  in Copy-Back mode.  If you say N here, it is used in Writethrough
-  mode.
-
-  If in doubt, say Y here.
-
-MPC860 (Pre Rev. C) CPU6 Silicon Errata
-CONFIG_8xx_CPU6
-  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
-  require workarounds for Linux (and most other OSes to work).  If you
-  get a BUG() very early in boot, this might fix the problem.  For
-  more details read the document entitled "MPC860 Family Device Errata
-  Reference" on Motorola's website.  This option also incurs a
-  performance hit.
-
-  If in doubt, say N here.
-
-MPC8xx IDE support
-CONFIG_BLK_DEV_MPC8xx_IDE
-  This option provides support for IDE on Motorola MPC8xx Systems.
-  Please see 'Type of MPC8xx IDE interface' for details.
-
-  If unsure, say N.
-
-Type of MPC8xx IDE interface
-CONFIG_IDE_8xx_PCCARD
-  Select how the IDE devices are connected to the MPC8xx system:
-
-  8xx_PCCARD uses the 8xx internal PCMCIA interface in combination
-             with a PC Card (e.g. ARGOSY portable Hard Disk Adapter),
-             ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL
-             systems)
-
-  8xx_DIRECT is used for directly connected IDE devices using the 8xx
-             internal PCMCIA interface (example: IVMS8 systems)
-
-  EXT_DIRECT is used for IDE devices directly connected to the 8xx
-             bus using some glue logic, but _not_ the 8xx internal
-             PCMCIA interface (example: IDIF860 systems)
-
-Use SMC2 for UART
-CONFIG_SMC2_UART
-  If you would like to use SMC2 as a serial port, say Y here.
-
-  If in doubt, say Y here.
-
-Use SMC2 for Console
-CONFIG_CONS_SMC2
-  If you are going to have a serial console on your device and are
-  using SMC2 for your serial port, say Y here, else say N.
-
-Use the alternate SMC2 I/O
-CONFIG_ALTSMC2
-  If you have an MPC823 or MPC850 and would like to use the alternate
-  SMC2 for I/O, say Y here.
-
-  If in doubt, say N here.
-
-Enable SCC2 and SCC3 for UART
-CONFIG_USE_SCC_IO
-  If your MPC8xx board has other SCC ports that you would like to use
-  for for a serial port, say Y here.
-
-  If in doubt, say N here.
-
-# Choice: ppc6xxtype
-Machine Type
-CONFIG_ALL_PPC
-  Linux currently supports several different kinds of PowerPC-based
-  machines: Apple Power Macintoshes and clones (such as the Motorola
-  Starmax series), PReP (PowerPC Reference Platform) machines (such
-  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
-  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
-  Platform), and several embedded PowerPC systems containing 4xx, 6xx,
-  7xx, 8xx, 74xx, and 82xx processors.  Currently, the default option
-  is to build a kernel which works on the first three.
-
-  Select PowerMac/PReP/MTX/CHRP if configuring for any of the above.
-
-  Select Gemini if configuring for a Synergy Microsystems' Gemini
-  series Single Board Computer.  More information is available at:
-  <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
-  Select APUS if configuring for a PowerUP Amiga.  More information is
-  available at: <http://linux-apus.sourceforge.net/>.
-
-Synergy-Gemini
-CONFIG_GEMINI
-  Select Gemini if configuring for a Synergy Microsystems' Gemini
-  series Single Board Computer.  More information is available at:
-  <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
-Amiga-Apus
-CONFIG_APUS
-  Select APUS if configuring for a PowerUP Amiga.
-  More information is available at:
-  <http://linux-apus.sourceforge.net/>.
-
-AltiVec Kernel Support
-CONFIG_ALTIVEC
-  This option enables kernel support for the Altivec extensions to the
-  PowerPC processor. The kernel currently supports saving and restoring
-  altivec registers, and turning on the 'altivec enable' bit so user
-  processes can execute altivec instructions.
-
-  This option is only usefully if you have a processor that supports
-  altivec (G4, otherwise known as 74xx series), but does not have
-  any affect on a non-altivec cpu (it does, however add code to the
-  kernel).
-
-  If in doubt, say Y here.
-
-Thermal Management Support
-CONFIG_TAU
-  G3 and G4 processors have an on-chip temperature sensor called the
-  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-  temperature within 2-4 degrees Celsius. This option shows the current
-  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-  Unfortunately, on some chip revisions, this sensor is very inaccurate
-  and in some cases, does not work at all, so don't assume the cpu
-  temp is actually what /proc/cpuinfo says it is.
-
-Interrupt driven TAU driver
-CONFIG_TAU_INT
-  The TAU supports an interrupt driven mode which causes an interrupt
-  whenever the temperature goes out of range. This is the fastest way
-  to get notified the temp has exceeded a range. With this option off,
-  a timer is used to re-check the temperature periodically.
-
-  However, on some cpus it appears that the TAU interrupt hardware
-  is buggy and can cause a situation which would lead unexplained hard
-  lockups.
-
-  Unless you are extending the TAU driver, or enjoy kernel/hardware
-  debugging, leave this option off.
-
-Average high and low temp
-CONFIG_TAU_AVERAGE
-  The TAU hardware can compare the temperature to an upper and lower bound.
-  The default behavior is to show both the upper and lower bound in
-  /proc/cpuinfo. If the range is large, the temperature is either changing
-  a lot, or the TAU hardware is broken (likely on some G4's). If the range
-  is small (around 4 degrees), the temperature is relatively stable.
-
-Power management support for PowerBooks
-CONFIG_PMAC_PBOOK
-  This provides support for putting a PowerBook to sleep; it also
-  enables media bay support.  Power management works on the
-  PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3. You
-  must get the power management daemon, pmud, to make it work and you
-  must have the /dev/pmu device (see the pmud README).
-
-  Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
-
-  If you have a PowerBook, you should say Y.
-
-  You may also want to compile the dma sound driver as a module and
-  have it autoloaded. The act of removing the module shuts down the
-  sound hardware for more power savings.
-
-Backlight control for LCD screens
-CONFIG_PMAC_BACKLIGHT
-  Say Y here to build in code to manage the LCD backlight on a
-  Macintosh PowerBook.  With this code, the backlight will be turned
-  on and off appropriately on power-management and lid-open/lid-closed
-  events; also, the PowerBook button device will be enabled so you can
-  change the screen brightness.
-
-# Choice: ppc8xxtype
-Embedded 8xx Board Type
-CONFIG_RPXLITE
-  Single-board computers based around the PowerPC MPC8xx chips and
-  intended for embedded applications.  The following types are
-  supported:
-
-  RPX-Lite:
-    Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
-  RPX-Classic:
-    Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on 
-    the MPC 860
-
-  BSE-IP: 
-    Bright Star Engineering ip-Engine.
-
-  TQM823L:
-  TQM850L:
-  TQM855L:
-  TQM860L:
-    MPC8xx based family of mini modules, half credit card size,
-    up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
-    2 x CAN bus interface, ...
-      Manufacturer: TQ Components, www.tq-group.de
-      Date of Release: October (?) 1999
-      End of Life: not yet :-)
-      URL:
-      - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
-      - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
-      - images: <http://www.denx.de/embedded-ppc-en.html>
-
-  FPS850L:
-    FingerPrint Sensor System (based on TQM850L)
-      Manufacturer: IKENDI AG, <http://www.ikendi.com/>
-      Date of Release: November 1999
-      End of life: end 2000 ?
-      URL: see TQM850L
-
-  SPD823TS:
-    MPC823 based board used in the "Tele Server" product
-    Manufacturer: Speech Design, <http://www.speech-design.de/>
-    Date of Release: Mid 2000 (?)
-    End of life: -
-    URL: <http://www.speech-design.de/>
-         select "English", then "Teleteam Solutions", then "TeleServer"
-
-  IVMS8:
-    MPC860 based board used in the "Integrated Voice Mail System",
-    Small Version (8 voice channels)
-    Manufacturer: Speech Design, <http://www.speech-design.de/>
-    Date of Release: December 2000 (?)
-    End of life: -
-    URL: <http://www.speech-design.de/>
-
-  IVML24:
-    MPC860 based board used in the "Integrated Voice Mail System", 
-    Large Version (24 voice channels)
-    Manufacturer: Speech Design, <http://www.speech-design.de/>
-    Date of Release: March 2001  (?)
-    End of life: -
-    URL: <http://www.speech-design.de/>
-
-  SM850:
-    Service Module (based on TQM850L)
-    Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/>
-    Date of Release: end 2000 (?)
-    End of life: mid 2001 (?)
-    URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html>
-
-  HERMES:
-    Hermes-Pro ISDN/LAN router with integrated 8 x hub
-    Manufacturer: Multidata Gesellschaft für Datentechnik und Informatik
-      <http://www.multidata.de/>
-    Date of Release: 2000 (?)
-    End of life: -
-    URL: <http://www.multidata.de/english/products/hpro.htm>
-
-  IP860:	
-    VMEBus IP (Industry Pack) carrier board with MPC860
-    Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-    Date of Release: ?
-    End of life: -
-    URL: <http://www.microsys.de/html/ip860.html>
-
-  PCU_E:
-    PCU = Peripheral Controller Unit, Extended
-    Manufacturer: Siemens AG, ICN (Information and Communication Networks)
-    	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-    Date of Release: April 2001
-    End of life: August 2001
-    URL: n. a.
-
-RPX-Classic
-CONFIG_RPXCLASSIC
-  The RPX-Classic is a single-board computer based on the Motorola
-  MPC860.  It features 16MB of DRAM and a variable amount of flash,
-  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
-  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
-  directly.
-
-BSE-IP
-CONFIG_BSEIP
-  Say Y here to support the Bright Star Engineering ipEngine SBC.
-  This is a credit-card-sized device featuring a MPC823 processor,
-  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
-  controller, and two RS232 ports.
-
-TQM823L
-CONFIG_TQM823L
-  Say Y here to support the TQM823L, one of an MPC8xx-based family of
-  mini SBCs (half credit-card size) from TQ Components first released
-  in late 1999.  Technical references are at
-  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-  <http://www.denx.de/embedded-ppc-en.html>.
-
-TQM850L
-CONFIG_TQM850L
-  Say Y here to support the TQM850L, one of an MPC8xx-based family of
-  mini SBCs (half credit-card size) from TQ Components first released
-  in late 1999.  Technical references are at
-  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-  <http://www.denx.de/embedded-ppc-en.html>.
-
-TQM855L
-CONFIG_TQM855L
-  Say Y here to support the TQM855L, one of an MPC8xx-based family of
-  mini SBCs (half credit-card size) from TQ Components first released
-  in late 1999.  Technical references are at
-  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-  <http://www.denx.de/embedded-ppc-en.html>.
-
-TQM860L
-CONFIG_TQM860L
-  Say Y here to support the TQM860L, one of an MPC8xx-based family of
-  mini SBCs (half credit-card size) from TQ Components first released
-  in late 1999.  Technical references are at
-  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-  <http://www.denx.de/embedded-ppc-en.html>.
-
-FPS850
-CONFIG_FPS850
-  Say Y here to support the FingerPrint Sensor from AKENDI IG, based
-  on the TQ Components TQM850L module, released November 1999 and
-  discontinued a year later.
-
-TQM860
-CONFIG_TQM860
-  Say Y here to support the TQM860, one of an MPC8xx-based family of
-  SBCs (credit-card size) from TQ Components first released in 
-  mid-1999 and discontinued mid-2000.
-
-SM850
-CONFIG_SM850
-  Say Y here to support the Service Module 850 from Dependable
-  Computer Systems, an SBC based on the TQM850L module by TQ
-  Components.  This board is no longer in production.  The
-  manufacturer's website is at <http://www.decomsys.com/>.
-
-SPD823TS
-CONFIG_SPD823TS
-  Say Y here to support the Speech Design 823 Tele-Server from Speech
-  Design, released in 2000.  The manufacturer's website is at
-  <http://www.speech-design.de/>.
-
-IVMS8
-CONFIG_IVMS8
-  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
-  from Speech Design, released March 2001.  The manufacturer's website
-  is at <http://www.speech-design.de/>.
-
-# IVML24 is not yet active
-IVML24
-CONFIG_IVML24
-  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
-  from Speech Design, released March 2001.  The manufacturer's website
-  is at <http://www.speech-design.de/>.
-
-MBX
-CONFIG_MBX
-  MBX is a line of Motorola single-board computer based around the
-  MPC821 and MPC860 processors, and intended for embedded-controller
-  applications.  Say Y here to support these boards directly.
-
-WinCept
-CONFIG_WINCEPT
-  The Wincept 100/110 is a Motorola single-board computer based on the
-  MPC821 PowerPC, introduced in 1998 and designed to be used in
-  thin-client machines.  Say Y to support it directly.
-
-# More systems that will be supported soon, according to
-# Wolfgang Denk <wd@denx.de>:
-#
-# TQM8260:
-#         MPC8260 based module
-#
-#         Manufacturer: TQ Components, www.tq-group.de
-#         Date of Release: June 2001
-#         End of Life: not yet :-)
-#         URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev003.pdf>
-#
-# IP860:
-#         VMEBus IP (Industry Pack) carrier board with MPC860
-#
-#         Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-#         Date of Release: ?
-#         End of life: -
-#         URL: <http://www.microsys.de/html/ip860.html>
-#
-# CU824:
-#         VMEBus Board with PCI extension with MPC8240 CPU
-#
-#         Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-#         Date of Release: early 2001 (?)
-#         End of life: -
-#         URL: <http://www.microsys.de/html/cu824.html>
-#
-# PM826:
-#         Modular system with MPC8260 CPU
-#
-#         Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-#         Date of Release: mid 2001
-#         End of life: -
-#         URL: <http://www.microsys.de/html/pm826.html>
-#
-# PCU_E:
-#         PCU = Peripheral Controller Unit; E = extended (?)
-#
-#         Mfr: Siemens AG, ICN (Information and Communication Networks)
-#         <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-#         Date of Release: April 2001
-#         End of life: -
-#         URL: n. a.o
-
-# Choice: ppc82xxtype
-Embedded 82xx Board Type
-CONFIG_EST8260
-  EST8260:
-    The EST8260 is a single-board computer manufactured by Wind River
-    Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-    the MPC8260.  Wind River Systems has a website at
-    <http://www.windriver.com/>, but the EST8260 cannot be found on it
-    and has probably been discontinued or rebadged.
-
-  TQM8260:
-    MPC8260 based module, little larger than credit card,
-    up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-    32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-    2 x serial ports, ...
-      Manufacturer: TQ Components, www.tq-group.de
-      Date of Release: June 2001
-      End of Life: not yet :-)
-      URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-  PM826:
-    Modular system with MPC8260 CPU
-    Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-    Date of Release: mid 2001
-    End of life: -
-    URL: <http://www.microsys.de/html/pm826.html>
-
-  CU824:
-    VMEBus Board with PCI extension with MPC8240 CPU
-    Manufacturer: MicroSys GmbH, http://www.microsys.de/
-    Date of Release: early 2001 (?)
-    End of life: -
-    URL: <http://www.microsys.de/html/cu824.html>
-
-ADB raw keycode support
-CONFIG_MAC_ADBKEYCODES
-  This provides support for sending raw ADB keycodes to console
-  devices.  This is the default up to 2.4.0, but in future this may be
-  phased out in favor of generic Linux keycodes.  If you say Y here,
-  you can dynamically switch via the
-      /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
-  sysctl and with the "keyboard_sends_linux_keycodes=" kernel
-  argument.
-
-  If unsure, say Y here.
-
-I2C/SPI Microcode Patch
-UCODE_PATCH
-  Motorola releases microcode updates for their 8xx CPM modules.  The
-  microcode update file has updates for IIC, SMC and USB.  Currently only
-  the USB update is available by default, if the MPC8xx USB option is
-  enabled.  If in doubt, say 'N' here.
-
-Mouse button 2+3 emulation support
-CONFIG_MAC_EMUMOUSEBTN
-  This provides generic support for emulating the 2nd and 3rd mouse
-  button with keypresses.  If you say Y here, the emulation is still
-  disabled by default.  The emulation is controlled by these sysctl
-  entries:
-      /proc/sys/dev/mac_hid/mouse_button_emulation
-      /proc/sys/dev/mac_hid/mouse_button2_keycode
-      /proc/sys/dev/mac_hid/mouse_button3_keycode
-
-Enhanced Real Time Clock Support (/dev/rtc)
-CONFIG_PPC_RTC
-  If you say Y here and create a character special file /dev/rtc with
-  major number 10 and minor number 135 using mknod ("man mknod"), you
-  will get access to the real time clock (or hardware clock) built
-  into your computer.
-
-  If unsure, say Y here.
-
-Support for Open Firmware device tree in /proc
-CONFIG_PROC_DEVICETREE
-  This option adds a device-tree directory under /proc which contains
-  an image of the device tree that the kernel copies from Open
-  Firmware. If unsure, say Y here.
-
-RTAS (RunTime Abstraction Services) in /proc
-CONFIG_PPC_RTAS
-  When you use this option, you will be able to use RTAS from
-  userspace.
-
-  RTAS stands for RunTime Abstraction Services and should
-  provide a portable way to access and set system information. This is
-  commonly used on RS/6000 (pSeries) computers.
-
-  You can access RTAS via the special proc file system entry rtas.
-  Don't confuse this rtas entry with the one in /proc/device-tree/rtas
-  which is readonly.
-
-  If you don't know if you can use RTAS look into
-  /proc/device-tree/rtas. If there are some entries, it is very likely
-  that you will be able to use RTAS.
-
-  You can do cool things with rtas. To print out information about
-  various sensors in the system, just do a
-
-    $ cat /proc/rtas/sensors
-
-  or if you power off your machine at night but want it running when
-  you enter your office at 7:45 am, do a
-
-    # date -d 'tomorrow 7:30' +%s > /proc/rtas/poweron
-
-  and shutdown.
-
-  If unsure, say Y.
-
-MESH (Power Mac internal SCSI) support
-CONFIG_SCSI_MESH
-  Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
-  SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
-  other Power Macintoshes do). Say Y to include support for this SCSI
-  adaptor. This driver is also available as a module called mesh.o
-  ( = code which can be inserted in and removed from the running
-  kernel whenever you want). If you want to compile it as a module,
-  say M here and read <file:Documentation/modules.txt>.
-
-Maximum synchronous transfer rate (MB/s) (0 = async)
-CONFIG_SCSI_MESH_SYNC_RATE
-  On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
-  drives a bus which is entirely internal to the machine (such as the
-  7500, 7600, 8500, etc.), the MESH is capable of synchronous
-  operation at up to 10 MB/s. On machines where the SCSI bus
-  controlled by the MESH can have external devices connected, it is
-  usually rated at 5 MB/s. 5 is a safe value here unless you know the
-  MESH SCSI bus is internal only; in that case you can say 10. Say 0
-  to disable synchronous operation.
-
-53C94 (Power Mac external SCSI) support
-CONFIG_SCSI_MAC53C94
-  On Power Macintoshes (and clones) with two SCSI buses, the external
-  SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
-  machines which only have one SCSI bus, such as the 7200, also use
-  the 53C94. Say Y to include support for the 53C94.
-
-  This driver is also available as a module called mac53c94.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-MACE (Power Mac Ethernet) support
-CONFIG_MACE
-  Power Macintoshes and clones with Ethernet built-in on the
-  motherboard will usually use a MACE (Medium Access Control for
-  Ethernet) interface. Say Y to include support for the MACE chip.
-
-  This driver is also available as a module called mace.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Use AAUI port instead of TP by default
-CONFIG_MACE_AAUI_PORT
-  Some Apple machines (notably the Apple Network Server) which use the
-  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
-  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
-  Y here if you have such a machine.  If unsure, say N.
-  The driver will default to AAUI on ANS anyway, and if you use it as
-  a module, you can provide the port_aaui=0|1 to force the driver.
-
-BMAC (G3 Ethernet) support
-CONFIG_BMAC
-  Say Y for support of BMAC Ethernet interfaces. These are used on G3
-  computers.
-
-  This driver is also available as a module called bmac.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-GMAC (G4/iBook Ethernet) support
-CONFIG_GMAC
-  Say Y for support of GMAC Ethernet interfaces. These are used on G4
-  and iBook computers.
-
-  This driver is also available as a module called gmac.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-National DP83902AV (Oak Ethernet) support
-CONFIG_OAKNET
-  Say Y if your machine has this type of Ethernet network card.
-
-  This driver is also available as a module called oaknet.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Video For Linux
-CONFIG_VIDEO_DEV
-  Support for audio/video capture and overlay devices and FM radio
-  cards. The exact capabilities of each device vary. User tools for
-  this are available from
-  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
-
-  If you are interested in writing a driver for such an audio/video
-  device or user software interacting with such a driver, please read
-  the file <file:Documentation/video4linux/API.html>.
-
-  This driver is also available as a module called videodev.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Video For Linux /proc file system information
-CONFIG_VIDEO_PROC_FS
-  If you say Y here, you are able to access video device information
-  in /proc/video.
-
-  To use this option, you have to check, that the "/proc file system
-  support" (CONFIG_PROC_FS) is enabled too.
-
-AIMSlab RadioTrack (aka RadioReveal) support
-CONFIG_RADIO_RTRACK
-  Choose Y here if you have one of these FM radio cards, and then fill
-  in the port address below.
-
-  Note that newer AIMSlab RadioTrack cards have a different chipset
-  and are not supported by this driver.  For these cards, use the
-  RadioTrack II driver below.
-
-  If you have a GemTeks combined (PnP) sound- and radio card you must
-  use this driver as a module and setup the card with isapnptools.
-  You must also pass the module a suitable io parameter, 0x248 has
-  been reported to be used by these cards.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.  More
-  information is contained in the file
-  <file:Documentation/video4linux/radiotrack.txt>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-aimslab.o.
-
-RadioTrack I/O port
-CONFIG_RADIO_RTRACK_PORT
-  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
-  haven't changed the jumper setting on the card.
-
-AIMSlab RadioTrack II support
-CONFIG_RADIO_RTRACK2
-  Choose Y here if you have this FM radio card, and then fill in the
-  port address below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-rtrack2.o.
-
-RadioTrack II I/O port
-CONFIG_RADIO_RTRACK2_PORT
-  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
-  haven't changed the jumper setting on the card.
-
-Aztech/Packard Bell Radio
-CONFIG_RADIO_AZTECH
-  Choose Y here if you have one of these FM radio cards, and then fill
-  in the port address below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-aztech.o.
-
-Aztech/Packard Bell radio card I/O port
-CONFIG_RADIO_AZTECH_PORT
-  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
-  haven't changed the setting of jumper JP3 on the card.  Removing the
-  jumper sets the card to 0x358.
-
-ADS Cadet AM/FM Radio Tuner Card
-CONFIG_RADIO_CADET
-  Choose Y here if you have one of these AM/FM radio cards, and then
-  fill in the port address below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  Further documentation on this driver can be found on the WWW at
-  <http://linux.blackhawke.net/cadet.html>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-cadet.o.
-
-SF16FMI Radio
-CONFIG_RADIO_SF16FMI
-  Choose Y here if you have one of these FM radio cards.  If you
-  compile the driver into the kernel and your card is not PnP one, you
-  have to add "sf16fm=<io>" to the kernel command line (I/O address is
-  0x284 or 0x384).
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-sf16fmi.o.
-
-Typhoon Radio (a.k.a. EcoRadio)
-CONFIG_RADIO_TYPHOON
-  Choose Y here if you have one of these FM radio cards, and then fill
-  in the port address and the frequency used for muting below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-typhoon.o.
-
-Support for /proc/radio-typhoon
-CONFIG_RADIO_TYPHOON_PROC_FS
-  Say Y here if you want the typhoon radio card driver to write
-  status information (frequency, volume, muted, mute frequency,
-  base address) to /proc/radio-typhoon. The file can be viewed with
-  your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
-  /proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
-
-Typhoon I/O port (0x316 or 0x336)
-CONFIG_RADIO_TYPHOON_PORT
-  Enter the I/O port of your Typhoon or EcoRadio radio card.
-
-Typhoon frequency set when muting the device (kHz)
-CONFIG_RADIO_TYPHOON_MUTEFREQ
-  Enter the frequency used for muting the radio. The device is never
-  completely silent. If the volume is just turned down, you can still
-  hear silent voices and music. For that reason, the frequency of the
-  radio device is set to the frequency you can enter here whenever
-  the device is muted. There should be no local radio station at that
-  frequency.
-
-Zoltrix Radio
-CONFIG_RADIO_ZOLTRIX
-  Choose Y here if you have one of these FM radio cards, and then fill
-  in the port address below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-zoltrix.o.
-
-ZOLTRIX I/O port (0x20c or 0x30c)
-CONFIG_RADIO_ZOLTRIX_PORT
-  Enter the I/O port of your Zoltrix radio card.
-
-I2C on parallel port
-CONFIG_I2C_PARPORT
-  I2C is a simple serial bus system used in many micro controller
-  applications.  Saying Y here will allow you to use your parallel
-  port as an I2C interface.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called i2c-parport.o.
-
-miroSOUND PCM20 radio
-CONFIG_RADIO_MIROPCM20
-  Choose Y here if you have this FM radio card. You also need to say Y
-  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
-  for this to work.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called miropcm20.o.
-
-miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)
-CONFIG_RADIO_MIROPCM20_RDS
-  Choose Y here if you want to see RDS/RBDS information like
-  RadioText, Programme Service name, Clock Time and date, Programme
-  TYpe and Traffic Announcement/Programme identification.  You also
-  need to say Y to "miroSOUND PCM20 radio" and devfs!
-
-  It's not possible to read the raw RDS packets from the device, so
-  the driver cant provide an V4L interface for this.  But the
-  availability of RDS is reported over V4L by the basic driver
-  already.  Here RDS can be read from files in /dev/v4l/rds.
-
-  As module the driver will be called miropcm20-rds.o.
-
-Maestro on board radio
-CONFIG_RADIO_MAESTRO
-  Say Y here to directly support the on-board radio tuner on the
-  Maestro 2 or 2E sound card.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-maestro.o.
-
-Guillemot MAXI Radio FM 2000 Radio Card
-CONFIG_RADIO_MAXIRADIO
-  Choose Y here if you have this radio card.  This card may also be
-  found as Gemtek PCI FM.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-maxiradio.o.
-
-GemTek Radio Card support
-CONFIG_RADIO_GEMTEK
-  Choose Y here if you have this FM radio card, and then fill in the
-  port address below.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-gemtek.o.
-
-GemTek I/O port
-CONFIG_RADIO_GEMTEK_PORT
-  Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
-  0x34c, if you haven't changed the jumper setting on the card. On
-  Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
-  port is 0x28c.
-
-Gemtek PCI Radio
-CONFIG_RADIO_GEMTEK_PCI
-  Choose Y here if you have this PCI FM radio card.
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video for Linux API.  Information on 
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-gemtek-pci.o.
-
-PlanB Video-In for PowerMacs
-CONFIG_VIDEO_PLANB
-  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
-  input hardware. If you want to experiment with this, say Y.
-  Otherwise, or if you don't understand a word, say N.
-  See <http://www.cpu.lu/~mlan/planb.html> for more info.
-
-  Saying M will compile this driver as a module (planb.o).
-
-TerraTec ActiveRadio
-CONFIG_RADIO_TERRATEC
-  Choose Y here if you have this FM radio card, and then fill in the
-  port address below. (TODO)
-
-  Note: This driver is in its early stages.  Right now volume and
-  frequency control and muting works at least for me, but
-  unfortunately I have not found anybody who wants to use this card
-  with Linux.  So if it is this what YOU are trying to do right now,
-  PLEASE DROP ME A NOTE!!  Rolf Offermanns (rolf@offermanns.de)
-
-  In order to control your radio card, you will need to use programs
-  that are compatible with the Video For Linux API.  Information on
-  this API and pointers to "v4l" programs may be found on the WWW at
-  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
-
-  If you want to compile this driver as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want),
-  say M here and read <file:Documentation/modules.txt>.  The module
-  will be called radio-terratec.o.
-
-Terratec I/O port (normally 0x590)
-CONFIG_RADIO_TERRATEC_PORT
-  Fill in the I/O port of your TerraTec FM radio card. If unsure, go
-  with the default.
-
-Trust FM radio card
-CONFIG_RADIO_TRUST
-  This is a driver for the Trust FM radio cards. Say Y if you have
-  such a card and want to use it under Linux.
-
-  This driver is also available as a module called radio-trust.o ( =
-  code which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-Trust I/O port (usually 0x350 or 0x358)
-CONFIG_RADIO_TRUST_PORT
-  Enter the I/O port of your Trust FM radio card. If unsure, try the
-  values "0x350" or "0x358".
-
-BT848 Video For Linux
-CONFIG_VIDEO_BT848
-  Support for BT848 based frame grabber/overlay boards. This includes
-  the Miro, Hauppauge and STB boards. Please read the material in
-  <file:Documentation/video4linux/bttv> for more information.
-
-  If you say Y or M here, you need to say Y or M to "I2C support" and
-  "I2C bit-banging interfaces" in the character device section.
-
-  This driver is available as a module called bttv.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-BT878 Audio DMA
-CONFIG_SOUND_BT878
-  Audio DMA support for bt878 based grabber boards.  As you might have
-  already noticed, bt878 is listed with two functions in /proc/pci.
-  Function 0 does the video stuff (bt848 compatible), function 1 does
-  the same for audio data.  This is a driver for the audio part of
-  the chip.  If you say 'Y' here you get a oss-compatible dsp device
-  where you can record from.  If you want just watch TV you probably
-  don't need this driver as most TV cards handle sound with a short
-  cable from the TV card to your sound card's line-in.
-
-  This driver is available as a module called btaudio.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-SGI Vino Video For Linux
-CONFIG_VIDEO_VINO
-  Say Y here to build in support for the Vino video input system found
-  on SGI Indy machines.
-
-Stradis 4:2:2 MPEG-2 video driver
-CONFIG_VIDEO_STRADIS
-  Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
-  driver for PCI.  There is a product page at
-  <http://www.stradis.com/decoder.html>.
-
-Zoran ZR36057/36060 Video For Linux
-CONFIG_VIDEO_ZORAN
-  Say Y here to include support for video cards based on the Zoran
-  ZR36057/36060 encoder/decoder chip (including the Iomega Buz and the
-  Miro DC10 and DC30 video capture cards).
-
-Include support for Iomega Buz
-CONFIG_VIDEO_ZORAN_BUZ
-  Say Y here to include support for the Iomega Buz video card.  There
-  is a Buz/Linux homepage at <http://www.lysator.liu.se/~gz/buz/>.
-
-Zoran ZR36120/36125 Video For Linux
-CONFIG_VIDEO_ZR36120
-  Support for ZR36120/ZR36125 based frame grabber/overlay boards.
-  This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
-  and Buster boards. Please read the material in
-  <file:Documentation/video4linux/zr36120.txt> for more information.
-
-  This driver is also available as a module called zr36120.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-SAA5249 Teletext processor
-CONFIG_VIDEO_SAA5249
-  Support for I2C bus based teletext using the SAA5249 chip. At the
-  moment this is only useful on some European WinTV cards.
-
-  This driver is also available as a module called saa5249.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-QuickCam BW Video For Linux
-CONFIG_VIDEO_BWQCAM
-  Say Y have if you the black and white version of the QuickCam
-  camera. See the next option for the color version.
-
-  This driver is also available as a module called bw-qcam.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-QuickCam Colour Video For Linux
-CONFIG_VIDEO_CQCAM
-  This is the video4linux driver for the colour version of the
-  Connectix QuickCam.  If you have one of these cameras, say Y here,
-  otherwise say N.  This driver does not work with the original
-  monochrome QuickCam, QuickCam VC or QuickClip.  It is also available
-  as a module (c-qcam.o).
-  Read <file:Documentation/video4linux/CQcam.txt> for more information.
-
-Winbond W9966CF Webcam Video For Linux
-CONFIG_VIDEO_W9966
-  Video4linux driver for Winbond's w9966 based Webcams.
-  Currently tested with the LifeView FlyCam Supra.
-  If you have one of these cameras, say Y here
-  otherwise say N.
-  This driver is also available as a module (w9966.o).
-
-  Check out <file:Documentation/video4linux/w9966.txt> for more
-  information.
-
-CPiA Video For Linux
-CONFIG_VIDEO_CPIA
-  This is the video4linux driver for cameras based on Vision's CPiA
-  (Colour Processor Interface ASIC), such as the Creative Labs Video
-  Blaster Webcam II. If you have one of these cameras, say Y here
-  and select parallel port and/or USB lowlevel support below,
-  otherwise say N. This will not work with the Creative Webcam III.
-
-  Please read <file:Documentation/video4linux/README.cpia> for more
-  information.
-
-  This driver is also available as a module (cpia.o).
-
-CPiA Parallel Port Lowlevel Support
-CONFIG_VIDEO_CPIA_PP
-  This is the lowlevel parallel port support for cameras based on
-  Vision's CPiA (Colour Processor Interface ASIC), such as the
-  Creative Webcam II. If you have the parallel port version of one
-  of these cameras, say Y here, otherwise say N. It is also available
-  as a module (cpia_pp.o).
-
-CPiA USB Lowlevel Support
-CONFIG_VIDEO_CPIA_USB
-  This is the lowlevel USB support for cameras based on Vision's CPiA
-  (Colour Processor Interface ASIC), such as the Creative Webcam II.
-  If you have the USB version of one of these cameras, say Y here,
-  otherwise say N. This will not work with the Creative Webcam III.
-  It is also available as a module (cpia_usb.o).
-
-Mediavision Pro Movie Studio Video For Linux
-CONFIG_VIDEO_PMS
-  Say Y if you have such a thing.  This driver is also available as a
-  module called pms.o ( = code which can be inserted in and removed
-  from the running kernel whenever you want).  If you want to compile
-  it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Sony Vaio Picturebook Motion Eye Video for Linux
-CONFIG_VIDEO_MEYE
-  This is the video4linux driver for the Motion Eye camera found
-  in the Vaio Picturebook laptops. Please read the material in
-  <file:Documentation/video4linux/meye.txt> for more information.
-
-  If you say Y or M here, you need to say Y or M to "Sony Programmable
-  I/O Control Device" in the character device section.
-
-  This driver is available as a module called meye.o ( = code
-  which can be inserted in and removed from the running kernel
-  whenever you want). If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.
-
-IBM's S/390 architecture
-CONFIG_ARCH_S390
-  Select this option, if you want to run the Kernel on one of IBM's
-  mainframes of the S/390 generation. You should have installed the
-  s390-compiler released by IBM (based on gcc-2.95.1) before.
-
-Merge some code into the kernel to make the image IPLable
-CONFIG_IPL
-  If you want to use the produced kernel to IPL directly from a
-  device, you have to merge a bootsector specific to the device
-  into the first bytes of the kernel. You will have to select the
-  IPL device.
-
-# Choice: s390_ipl
-IPL from a S/390 tape unit
-CONFIG_IPL_TAPE
-  Select this option if you want to IPL the image from a Tape.
-
-IPL from a virtual card reader emulated by VM/ESA
-CONFIG_IPL_RDR_VM
-  Select this option if you are running under VM/ESA and want
-  to IPL the image from the emulated card reader.
-
-IPL from a real card reader
-CONFIG_IPL_RDR
-  Select this option if you want to IPL the image from a real
-  card reader. Maybe you still got one and want to try. We didn't
-  test.
-
-Support for DASD hard disks
-CONFIG_DASD
-  Enable this option if you want to access DASDs directly utilizing
-  S/390s channel subsystem commands. This is necessary for running
-  natively on a single image or an LPAR.
-
-Enable DASD fast write
-CONFIG_DASD_FAST_IO
-  Enable fast I/O for DASDs. That means that the next I/O command
-  is already issued at interrupt time, if an I/O request is pending.
-  This option gives significant speedup of I/O, because we don't
-  schedule the bottom-halves as often as Intel.
-
-Support for IBM-style disk-labels (S/390)
-CONFIG_S390_PARTITION
-  Enable this option to assure standard IBM labels on the DASDs.
-  You must enable it, if you are planning to access DASDs also
-  attached to another IBM mainframe operation system (OS/390, 
-  VM/ESA, VSE/ESA).
-
-ECKD devices
-CONFIG_DASD_ECKD
-  ECKD devices are the most commonly used devices. you should enable
-  this option unless you are very sure to have no ECKD device.
-
-CKD devices
-CONFIG_DASD_CKD
-  CKD devices are currently unsupported.
-
-FBA devices
-CONFIG_DASD_FBA
-  FBA devices are currently unsupported.
-
-Merge some code into the kernel to make the image IPLable
-CONFIG_IPLABLE
-  If you want to use the produced kernel to IPL directly from a
-  device, you have to merge a bootsector specific to the device
-  into the first bytes of the kernel. You will have to select the
-  IPL device on another question, that pops up, when you select
-  CONFIG_IPLABE.
-
-Support for 3215 line mode terminal
-CONFIG_TN3215
-  Include support for IBM 3215 line-mode terminals.
-
-Support for console on 3215 line mode terminal
-CONFIG_TN3215_CONSOLE
-  Include support for using an IBM 3215 line-mode terminal as a
-  Linux system console.
-
-Support for 3270 line mode terminal
-CONFIG_TN3270
-  Include support for IBM 3270 line-mode terminals.
-
-Support for console on 3270 line mode terminal
-CONFIG_TN3270_CONSOLE
-  Include support for using an IBM 3270 line-mode terminal as a Linux
-  system console.  Available only if 3270 support is compiled in
-  statically.
-
-Support for HWC line mode terminal
-CONFIG_HWC
-  Include support for IBM HWC line-mode terminals.
-
-Console on HWC line mode terminal
-CONFIG_HWC_CONSOLE
-  Include support for using an IBM HWC line-mode terminal as the Linux
-  system console.
-
-S/390 tape device support
-CONFIG_S390_TAPE
-  Select this option if you want to access channel-attached tape
-  devices on IBM S/390 or zSeries.
-  If you select this option you will also want to select at
-  least one of the tape interface options and one of the tape
-  hardware options in order to access a tape device.
-  This option is also available as a module. The module will be
-  called tape390.o and include all selected interfaces and
-  hardware drivers.
-
-Support for tape character devices
-CONFIG_S390_TAPE_CHAR
-  Select this option if you want to access your channel-attached
-  tape devices using the character device interface.
-  This interface is similar to other Linux tape devices like
-  SCSI-Tapes (st) and the floppy tape device (ftape).
-  If unsure, say "Y".
-
-Support for tape block devices
-CONFIG_S390_TAPE_BLOCK
-  Select this option if you want to access your channel-attached tape
-  devices using the block device interface.  This interface is similar
-  to CD-ROM devices on other platforms.  The tapes can only be
-  accessed read-only when using this interface.  Have a look at
-  Documentation/s390/TAPE for further information about creating
-  volumes for and using this interface.  It is safe to say "Y" here.
-
-Support for 3490 tape hardware
-CONFIG_S390_TAPE_3490
-  Select this option if you want to access IBM 3480 magnetic
-  tape subsystems and 100% compatibles.
-  It is safe to say "Y" here.
-
-Support for 3480 tape hardware
-CONFIG_S390_TAPE_3480
-  Select this option if you want to access IBM 3490 magnetic
-  tape subsystems and 100% compatibles.
-
-CTC device support
-CONFIG_CTC
-  Select this option if you want to use channel-to-channel networking
-  on IBM S/390 or zSeries. This device driver supports real CTC
-  coupling using ESCON. It also supports virtual CTCs when running
-  under VM. It will use the channel device configuration if this is
-  available.  This option is also available as a module which will be
-  called ctc.o.  If you do not know what it is, it's safe to say "Y".
-
-Support for DIAG access to CMS reserved Disks
-CONFIG_DASD_DIAG
-  Select this option if you want to use CMS reserved Disks under VM
-  with the Diagnose250 command.  If you are not running under VM or
-  unsure what it is, say "N".
-
-XPRAM disk support
-CONFIG_BLK_DEV_XPRAM
-  Select this option if you want to use your expanded storage on S/390
-  or zSeries as a disk.  This is useful as a _fast_ swap device if you
-  want to access more than 2G of memory when running in 31 bit mode.
-  This option is also available as a module which will be called
-  xpram.o.  If unsure, say "N".
-
-Fast IRQ handling
-CONFIG_FAST_IRQ
-  Select this option in order to get the interrupts processed faster
-  on your S/390 or zSeries machine.  If selected, after an interrupt
-  is processed, the channel subsystem will be asked for other pending
-  interrupts which will also be processed before leaving the interrupt
-  context.  This speeds up the I/O a lot. Say "Y".
-
-IUCV device support (VM only)
-CONFIG_IUCV
-  Select this option if you want to use inter-user communication
-  vehicle networking under VM or VIF.  This option is also available
-  as a module which will be called iucv.o. If unsure, say "Y".
-
-Kernel support for 31 bit ELF binaries
-CONFIG_S390_SUPPORT
-  Select this option if you want to enable your system kernel to
-  handle system-calls from ELF binaries for 31 bit ESA.  This option
-  (and some other stuff like libraries and such) is needed for
-  executing 31 bit applications.  It is safe to say "Y".
-
-Channel Device Configuration
-CONFIG_CHANDEV
-  The channel device layer is a layer to provide a consistent
-  interface for configuration & default machine check (devices
-  appearing & disappearing) handling on Linux for s/390 & z/Series
-  channel devices.
-
-  s/390 & z/Series channel devices include among others
-
-  lcs (the most common ethernet/token ring/fddi standard on
-  zSeries)
-  ctc/escon hi speed like serial link standard on zSeries
-  claw used to talk to cisco routers.
-  qeth gigabit ethernet.
-
-  These devices use two channels one read & one write for
-  configuration & communication (& a third channel, the data
-  channel the case of gigabit ethernet). The motivation
-  behind developing this layer was that there was a lot of
-  duplicate code among the channel device drivers for
-  configuration.
-
-  Also the lcs & ctc drivers tended to fight over
-  3088/08's & 3088/1F's which could be either 2216/3172
-  channel attached lcs compatible devices or escon/ctc pipes
-  had to be configured separately as they couldn't autodetect,
-  this is now simplified by doing the configuration in a single
-  place (the channel device layer).
-
-  This layer isn't invasive & it is quite okay to use channel
-  drivers which don't use the channel device layer in
-  conjunction with drivers which do.
-
-  For more info see the chandev manpage usually distributed in
-  <file:Documentation/s390/chandev.8> in the Linux source tree.
-
-SAB3036 tuner support
-CONFIG_TUNER_3036
-  Say Y here to include support for Philips SAB3036 compatible tuners.
-  If in doubt, say N.
-
-Compaq SMART2 support
-CONFIG_BLK_CPQ_DA
-  This is the driver for Compaq Smart Array controllers.  Everyone
-  using these boards should say Y here.  See the file
-  <file:Documentation/cpqarray.txt> for the current list of boards
-  supported by this driver, and for further information on the use of
-  this driver.
-
-Show crashed user process info
-CONFIG_PROCESS_DEBUG
-  Say Y to print all process fault locations to the console.  This is
-  a debugging option; you probably do not want to set it unless you
-  are an S390 port maintainer.
-
-#
-# ARM options
-#
-# CML2 transition note: CML1 asks ARCH_ARCA5K, then has ARCH_A5K and ARCH_ARK
-# as subquestions.  CML2 asks the subquestions in the armtype menu and makes
-# ARCH_ARCA5K a derived symbol.
-ARM System type
-CONFIG_ARCH_ARCA5K
-  This selects what ARM system you wish to build the kernel for. It
-  also selects to some extent the CPU type. If you are unsure what
-  to set this option to, please consult any information supplied with
-  your system.
-
-# Choice: armtype
-A5000
-CONFIG_ARCH_A5K
-  Say Y here to to support the Acorn A5000.  Linux can support the
-  internal IDE disk and CD-ROM interface, serial and parallel port,
-  and the floppy drive.  Note that on some A5000s the floppy is
-  plugged into the wrong socket on the motherboard.
-
-Archimedes
-CONFIG_ARCH_ARC
-  The Acorn Archimedes was an personal computer based on an 8K ARM2
-  processor, released in 1987.  It supported 512K of RAM and 2 800K
-  floppy disks.  Picture and more detailed specifications at
-  <http://www.computingmuseum.com/museum/archi.htm>.
-
-EBSA-110
-CONFIG_ARCH_EBSA110
-  This is an evaluation board for the StrongARM processor available
-  from Digital. It has limited hardware on-board, including an onboard
-  Ethernet interface, two PCMCIA sockets, two serial ports and a
-  parallel port.
-
-RiscPC
-CONFIG_ARCH_RPC
-  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-2MB physical memory
-CONFIG_PAGESIZE_16
-  Say Y here if your Archimedes or A5000 system has only 2MB of
-  memory, otherwise say N.  The resulting kernel will not run on a
-  machine with 4MB of memory.
-
-CATS
-CONFIG_ARCH_CATS
-  Say Y here if you intend to run this kernel on the CATS.
-
-  Saying N will reduce the size of the Footbridge kernel.
-
-EBSA285 (addin mode)
-CONFIG_ARCH_EBSA285_ADDIN
-  Say Y here if you intend to run this kernel on the EBSA285 card
-  in addin mode.
-
-  Saying N will reduce the size of the Footbridge kernel.
-
-EBSA285 (host mode)
-CONFIG_ARCH_EBSA285_HOST
-  Say Y here if you intend to run this kernel on the EBSA285 card
-  in host ("central function") mode.
-
-  Saying N will reduce the size of the Footbridge kernel.
-
-LinkUp Systems L7200 SDB
-CONFIG_ARCH_L7200
-  Say Y here if you intend to run this kernel on a LinkUp Systems
-  L7200 Software Development Board which uses an ARM720T processor.
-  Information on this board can be obtained at:
-
-  <http://www.linkupsys.com/>
-
-  If you have any questions or comments about the Linux kernel port
-  to this board, send e-mail to sjhill@cotw.com.
-
-NetWinder
-CONFIG_ARCH_NETWINDER
-  Say Y here if you intend to run this kernel on the Rebel.COM
-  NetWinder.  Information about this machine can be found at:
-
-  <http://www.netwinder.org/>
-
-  Saying N will reduce the size of the Footbridge kernel.
-
-P720T
-CONFIG_ARCH_P720T
-  Say Y here if you intend to run this kernel on the ARM Prospector
-  720T.
-
-Compaq Personal Server
-CONFIG_ARCH_PERSONAL_SERVER
-  Say Y here if you intend to run this kernel on the Compaq
-  Personal Server.
-
-  Saying N will reduce the size of the Footbridge kernel.
-
-  The Compaq Personal Server is not available for purchase.
-  There are no product plans beyond the current research
-  prototypes at this time.  Information is available at:
-
-  <http://crl.research.compaq.com/projects/personalserver/>
-
-  If you have any questions or comments about the  Compaq Personal
-  Server, send e-mail to skiff@crl.dec.com.
-
-Assabet
-CONFIG_SA1100_ASSABET
-  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
-  Microprocessor Development Board (also known as the Assabet).
-
-Neponset
-CONFIG_ASSABET_NEPONSET
-  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
-  Microprocessor Development Board (Assabet)  with the SA-1111
-  Development Board (Nepon).
-
-Compaq iPAQ H3600
-CONFIG_SA1100_H3600
-  Say Y here if you intend to run this kernel on the Compaq iPAQ
-  H3600 handheld computer.  Information about this machine and the
-  Linux port to this machine can be found at:
-
-  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-  <http://www.compaq.com/products/handhelds/pocketpc/>
-
-Brutus
-CONFIG_SA1100_BRUTUS
-  Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
-  Microprocessor Development Board (also known as the Brutus).
-
-LART
-CONFIG_SA1100_LART
-  Say Y here if you are using the Linux Advanced Radio Terminal
-  (also known as the LART).  See <http://www.lart.tudelft.nl/> for
-  information on the LART.
-
-GraphicsClient
-CONFIG_SA1100_GRAPHICSCLIENT
-  Say Y here if you are using an Applied Data Systems Intel(R)
-  StrongARM(R) SA-1100 based Graphics Client SBC.  See
-  <http://www.flatpanels.com/> for information on this system.
-
-CerfBoard
-CONFIG_SA1100_CERF
-  The Intrinsyc CerfBoard is based on the StrongARM 1110.
-  More information is available at:
-  <http://www.intrinsyc.com/products/referenceplatforms/cerfboard.html>.
-
-  Say Y if configuring for an Intrinsyc CerfBoard.
-  Say N otherwise.
-
-FlexaNet
-CONFIG_SA1100_FLEXANET
-  Say Y here if you intend to run this kernel on the FlexaNet
-  handheld instruments. Information about this machine can be
-  found at: <http://www.flexanet.com/>.
-
-nanoEngine
-CONFIG_SA1100_NANOENGINE
-  The nanoEngine is a StrongARM 1110-based single board computer
-  from Bright Star Engineering. More information is available at:
-  <http://www.brightstareng.com/arm/nanoeng.htm>.
-
-  Say Y if configuring for a nanoEngine.
-  Say N otherwise.
-
-Pangolin
-CONFIG_SA1100_PANGOLIN
-  Pangolin is a StrongARM 1110-based evaluation platform produced
-  by Dialogue Technology.  It has EISA slots for ease of configuration
-  with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
-  card, and TFT-LCD card.
-
-  Say Y if configuring for a Pangolin.
-  Say N otherwise.
-
-Victor
-CONFIG_SA1100_VICTOR
-  Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
-  SA-1100 based Victor Digital Talking Book Reader.  See
-  <http://www.visuaide.com/pagevictor.en.html> for information on
-  this system.
-
-Support ARM610 processor
-CONFIG_CPU_ARM610
-  The ARM610 is the successor to the ARM3 processor
-  and was produced by VLSI Technology Inc.
-
-  Say Y if you want support for the ARM610 processor.
-  Otherwise, say N.
-
-Support ARM710 processor
-CONFIG_CPU_ARM710
-  A 32-bit RISC microprocessor based on the ARM7 processor core
-  designed by Advanced RISC Machines Ltd. The ARM710 is the
-  successor to the ARM610 processor. It was released in
-  July 1994 by VLSI Technology Inc.
-
-  Say Y if you want support for the ARM710 processor.
-  Otherwise, say N.
-
-Support ARM720T processor
-CONFIG_CPU_ARM720T
-  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
-  MMU built around an ARM7TDMI core.
-
-  Say Y if you want support for the ARM720T processor.
-  Otherwise, say N.
-
-Support ARM920T processor
-CONFIG_CPU_ARM920T
-  The ARM920T is licensed to be produced by numerous vendors,
-  and is used in the Maverick EP9312.  More information at
-  <http://linuxdevices.com/products/PD2382866068.html>.
-
-  Say Y if you want support for the ARM920T processor.
-  Otherwise, say N.
-
-Support ARM1020 processor
-CONFIG_CPU_ARM1020
-  The ARM1020 is the cached version of the ARM10 processor,
-  with an addition of a floating-point unit.
-
-  Say Y if you want support for the ARM1020 processor.
-  Otherwise, say N.
-
-Support StrongARM SA-110 processor
-CONFIG_CPU_SA110
-  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
-  is available at five speeds ranging from 100 MHz to 233 MHz.
-  More information is available at
-  <http://developer.intel.com/design/strong/sa110.htm>.
-
-  Say Y if you want support for the SA-110 processor.
-  Otherwise, say N.
-
-Math emulation
-CONFIG_FPE_NWFPE
-  Say Y to include the NWFPE floating point emulator in the kernel.
-  This is necessary to run most binaries. Linux does not currently
-  support floating point hardware so you need to say Y here even if
-  your machine has an FPA or floating point co-processor podule.
-
-  It is also possible to say M to build the emulator as a module
-  (nwfpe.o) or indeed to leave it out altogether. However, unless you
-  know what you are doing this can easily render your machine
-  unbootable. Saying Y is the safe option.
-
-  You may say N here if you are going to load the Acorn FPEmulator
-  early in the bootup.
-
-FastFPE math emulation
-CONFIG_FPE_FASTFPE
-  Say Y here to include the FAST floating point emulator in the kernel.
-  This is an experimental much faster emulator which has only 32 bit
-  precision for the mantissa.  It does not support any exceptions.
-  This makes it very simple, it is approximately 4-8 times faster than
-  NWFPE.
-
-  It should be sufficient for most programs.  It is definitely not
-  suitable if you do scientific calculations that need double
-  precision for iteration formulas that sum up lots of very small
-  numbers.  If you do not feel you need a faster FP emulation you
-  should better choose NWFPE.
-
-  It is also possible to say M to build the emulator as a module
-  (fastfpe.o).  But keep in mind that you should only load the FP
-  emulator early in the bootup.  You should never change from NWFPE to
-  FASTFPE or vice versa in an active system!
-
-DS1620 thermometer support
-CONFIG_DS1620
-  Say Y here to include support for the thermal management hardware
-  found in the NetWinder. This driver allows the user to control the
-  temperature set points and to read the current temperature.
-
-  It is also possible to say M here to build it as a module (ds1620.o)
-  It is recommended to be used on a NetWinder, but it is not a
-  necessity.
-
-Debug high memory support
-CONFIG_DEBUG_HIGHMEM
-  This options enables addition error checking for high memory systems.
-  Disable for production systems.
-
-Verbose kernel error messages
-CONFIG_DEBUG_ERRORS
-  This option controls verbose debugging information which can be
-  printed when the kernel detects an internal error. This debugging
-  information is useful to kernel hackers when tracking down problems,
-  but mostly meaningless to other people. It's safe to say Y unless
-  you are concerned with the code size or don't want to see these
-  messages.
-
-Compile kernel without frame pointer
-CONFIG_NO_FRAME_POINTER
-  If you say Y here, the resulting kernel will be slightly smaller and
-  faster. However, when a problem occurs with the kernel, the
-  information that is reported is severely limited. Most people
-  should say N here.
-
-Verbose user fault messages
-CONFIG_DEBUG_USER
-  When a user program crashes due to an exception, the kernel can
-  print a brief message explaining what the problem was. This is
-  sometimes helpful for debugging but serves no purpose on a
-  production system. Most people should say N here.
-
-Include gdb debugging information in kernel binary
-CONFIG_DEBUG_INFO
-  Say Y here to include source-level debugging information in the
-  `vmlinux' binary image. This is handy if you want to use gdb or
-  addr2line to debug the kernel. It has no impact on the in-memory
-  footprint of the running kernel but it can increase the amount of
-  time and disk space needed for compilation of the kernel. If in
-  doubt say N.
-
-Kernel low-level debugging functions
-CONFIG_DEBUG_LL
-  Say Y here to include definitions of printascii, printchar, printhex
-  in the kernel.  This is helpful if you are debugging code that
-  executes before the console is initialized.
-
-Kernel low-level debugging messages via footbridge serial port
-CONFIG_DEBUG_DC21285_PORT
-  Say Y here if you want the debug print routines to direct their
-  output to the serial port in the DC21285 (Footbridge). Saying N
-  will cause the debug messages to appear on the first 16550
-  serial port.
-
-Kernel low-level debugging messages via UART2
-CONFIG_DEBUG_CLPS711X_UART2
-  Say Y here if you want the debug print routines to direct their
-  output to the second serial port on these devices.  Saying N will
-  cause the debug messages to appear on the first serial port.
-
-Disable pgtable cache
-CONFIG_NO_PGT_CACHE
-  Normally the kernel maintains a `quicklist' of preallocated
-  pagetable structures in order to increase performance. On machines
-  with very few pages this may however be a loss. Say Y here to
-  disable the pgtable cache.
-
-RISC OS personality
-CONFIG_ARTHUR
-  Say Y here to include the kernel code necessary if you want to run
-  Acorn RISC OS/Arthur binaries under Linux. This code is still very
-  experimental; if this sounds frightening, say N and sleep in peace.
-  You can also say M here to compile this support as a module (which
-  will be called arthur.o).
-
-Initial kernel command line
-CONFIG_CMDLINE
-  On some architectures (EBSA110 and CATS), there is currently no way
-  for the boot loader to pass arguments to the kernel. For these
-  architectures, you should supply some command-line options at build
-  time by entering them here. As a minimum, you should specify the
-  memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
-Kernel-mode alignment trap handler
-CONFIG_ALIGNMENT_TRAP
-  ARM processors can not fetch/store information which is not
-  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
-  address divisible by 4. On 32-bit ARM processors, these non-aligned
-  fetch/store instructions will be emulated in software if you say
-  here, which has a severe performance impact. This is necessary for
-  correct operation of some network protocols. With an IP-only
-  configuration it is safe to say N, otherwise say Y.
-
-DC21285 serial port support
-CONFIG_SERIAL_21285
-  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
-  PCI bridge you can enable its onboard serial port by enabling this
-  option. The device has major ID 4, minor 64.
-
-Console on DC21285 serial port
-CONFIG_SERIAL_21285_CONSOLE
-  If you have enabled the serial port on the 21285 footbridge you can
-  make it the console by answering Y to this option.
-
-SA1100 serial port support
-CONFIG_SERIAL_SA1100
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  If you have a machine based on a SA1100/SA1110 StrongARM CPU you can
-  enable its onboard serial port by enabling this option.
-  Please read <file:Documentation/arm/SA1100/serial_UART> for further
-  info.
-
-Console on SA1100 serial port
-CONFIG_SERIAL_SA1100_CONSOLE
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  If you have enabled the serial port on the SA1100/SA1110 StrongARM
-  CPU you can make it the console by answering Y to this option.
-
-L7200 serial port support
-CONFIG_SERIAL_L7200
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  If you have a LinkUp Systems L7200 board you can enable its two
-  onboard serial ports by enabling this option. The device numbers
-  are major ID 4 with minor 64 and 65 respectively.
-
-Console on L7200 serial port
-CONFIG_SERIAL_L7200_CONSOLE
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  If you have enabled the serial ports on the L7200 development board
-  you can make the first serial port the console by answering Y to
-  this option.
-
-L7200 SDB keyboard support
-CONFIG_KEYBOARD_L7200
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  Enable this option if you would like to be able to use a keyboard
-  on a LinkUp Systems L7200 board.
-
-L7200 SDB Fujitsu keyboard support
-CONFIG_KEYBOARD_L7200_NORM
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  Select the Fujitsu keyboard if you want a normal QWERTY style
-  keyboard on the LinkUp SDB.
-
-L7200 SDB Prototype keyboard support
-CONFIG_KEYBOARD_L7200_DEMO
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  Select the prototype keyboard if you want to play with the
-  LCD/keyboard combination on the LinkUp SDB.
-
-Footbridge Mode
-CONFIG_HOST_FOOTBRIDGE
-  * Orphaned entry retained 20 April 2001 by Russell King       *
-  * If you read this note from the configurator, please contact *
-  * the Configure.help maintainers.                             *
-  The 21285 Footbridge chip can operate in either `host mode' or
-  `add-in' mode.  Say Y if your 21285 is in host mode, and therefore
-  is the configuration master, otherwise say N. This must not be
-  set to Y if the card is used in 'add-in' mode.
-
-MFM hard disk support
-CONFIG_BLK_DEV_MFM
-  Support the MFM hard drives on the Acorn Archimedes both
-  on-board the A4x0 motherboards and via the Acorn MFM podules.
-  Drives up to 64MB are supported. If you haven't got one of these
-  machines or drives just say N.
-
-Old Archimedes floppy (1772) support
-CONFIG_BLK_DEV_FD1772
-  Support the floppy drive on the Acorn Archimedes (A300, A4x0, A540,
-  R140 and R260) series of computers; it supports only 720K floppies
-  at the moment. If you don't have one of these machines just answer
-  N.
-
-Autodetect hard drive geometry
-CONFIG_BLK_DEV_MFM_AUTODETECT
-  If you answer Y, the MFM code will attempt to automatically detect
-  the cylinders/heads/sectors count on your hard drive. WARNING: This
-  sometimes doesn't work and it also does some dodgy stuff which
-  potentially might damage your drive.
-
-NetWinder /dev/flash support
-CONFIG_NWFLASH
-  If you say Y here and create a character device /dev/flash with
-  major 10 and minor 160 you can manipulate the flash ROM containing
-  the NetWinder firmware. Be careful as accidentally overwriting the
-  flash contents can render your computer unbootable. On no account
-  allow random users access to this device. :-)
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called nwflash.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
-  If you're not sure, say N.
-
-SRM environment variables in procfs
-CONFIG_SRM_ENV
-  If you enable this option, a subdirectory called srm_environment
-  will give you access to the most important SRM environment
-  variables. If you've got an Alpha style system supporting
-  SRC, then it is a good idea to say Yes or Module to this driver.
-
-  This driver is also available as a module and will be called
-  srm_env.o if you build it as a module.
-
-Footbridge internal watchdog
-CONFIG_21285_WATCHDOG
-  The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
-  here if you wish to use this. Alternatively say M to compile the
-  driver as a module, which will be called wdt285.o.
-
-  This driver does not work on all machines. In particular, early CATS
-  boards have hardware problems that will cause the machine to simply
-  lock up if the watchdog fires.
-
-  "If in doubt, leave it out" - say N.
-
-NetWinder WB83C977 watchdog
-CONFIG_977_WATCHDOG
-  Say Y here to include support for the WB977 watchdog included in
-  NetWinder machines. Alternatively say M to compile the driver as
-  a module, which will be called wdt977.o.
-
-  Not sure? It's safe to say N.
-
-IrDA subsystem support
-CONFIG_IRDA
-  Say Y here if you want to build support for the IrDA (TM) protocols.
-  The Infrared Data Associations (tm) specifies standards for wireless
-  infrared communication and is supported by most laptops and PDA's.
-
-  To use Linux support for the IrDA (tm) protocols, you will also need
-  some user-space utilities like irattach.  For more information, see
-  the file <file:Documentation/networking/irda.txt>.  You also want to
-  read the IR-HOWTO, available at
-  <http://www.linuxdoc.org/docs.html#howto>.
-
-  If you want to exchange bits of data (vCal, vCard) with a PDA, you
-  will need to install some OBEX application, such as OpenObex :
-  <http://sourceforge.net/projects/openobex/>
-
-  This support is also available as a module called irda.o.  If you
-  want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.
-
-Ultra (connectionless) protocol
-CONFIG_IRDA_ULTRA
-  Say Y here to support the connectionless Ultra IRDA protocol.
-  Ultra allows to exchange data over IrDA with really simple devices
-  (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
-  no management frames, simple fixed header).
-  Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
-
-IrDA cache last LSAP
-CONFIG_IRDA_CACHE_LAST_LSAP
-  Say Y here if you want IrLMP to cache the last LSAP used.  This
-  makes sense since most frames will be sent/received on the same
-  connection.  Enabling this option will save a hash-lookup per frame.
-
-  If unsure, say Y.
-
-IrDA Fast RRs
-CONFIG_IRDA_FAST_RR
-  Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
-  when acting as a primary station.
-  Disabling this option will make latency over IrDA very bad. Enabling
-  this option will make the IrDA stack send more packet than strictly
-  necessary, thus reduce your battery life (but not that much).
-
-  Fast RR will make IrLAP send out a RR frame immediately when
-  receiving a frame if its own transmit queue is currently empty. This
-  will give a lot of speed improvement when receiving much data since
-  the secondary station will not have to wait the max. turn around
-  time (usually 500ms) before it is allowed to transmit the next time.
-  If the transmit queue of the secondary is also empty, the primary will
-  start backing-off before sending another RR frame, waiting longer
-  each time until the back-off reaches the max. turn around time.
-  This back-off increase in controlled via
-  /proc/sys/net/irda/fast_poll_increase
-
-  If unsure, say Y.
-
-IrDA debugging information
-CONFIG_IRDA_DEBUG
-  Say Y here if you want the IrDA subsystem to write debug information
-  to your syslog. You can change the debug level in
-  /proc/sys/net/irda/debug .
-  When this option is enabled, the IrDA also perform many extra internal
-  verifications which will usually prevent the kernel to crash in case of
-  bugs.
-
-  If unsure, say Y (since it makes it easier to find the bugs).
-
-IrLAN protocol
-CONFIG_IRLAN
-  Say Y here if you want to build support for the IrLAN protocol.  If
-  you want to compile it as a module (irlan.o), say M here and read
-  <file:Documentation/modules.txt>.  IrLAN emulates an Ethernet and
-  makes it possible to put up a wireless LAN using infrared beams.
-
-  The IrLAN protocol can be used to talk with infrared access points
-  like the HP NetbeamIR, or the ESI JetEye NET.  You can also connect
-  to another Linux machine running the IrLAN protocol for ad-hoc
-  networking!
-
-IrNET protocol
-CONFIG_IRNET
-  Say Y here if you want to build support for the IrNET protocol.  If
-  you want to compile it as a module (irnet.o), say M here and read
-  <file:Documentation/modules.txt>.  IrNET is a PPP driver, so you
-  will also need a working PPP subsystem (driver, daemon and
-  config)...
-
-  IrNET is an alternate way to tranfer TCP/IP traffic over IrDA.  It
-  uses synchronous PPP over a set of point to point IrDA sockets.  You
-  can use it between Linux machine or with W2k.
-
-IrCOMM protocol
-CONFIG_IRCOMM
-  Say Y here if you want to build support for the IrCOMM protocol.  If
-  you want to compile it as a module (you will get ircomm.o and
-  ircomm-tty.o), say M here and read <file:Documentation/modules.txt>.
-  IrCOMM implements serial port emulation, and makes it possible to
-  use all existing applications that understands TTY's with an
-  infrared link.  Thus you should be able to use application like PPP,
-  minicom and others.  Enabling this option will create two modules
-  called ircomm and ircomm_tty.
-
-IrTTY IrDA Device Driver
-CONFIG_IRTTY_SIR
-  Say Y here if you want to build support for the IrTTY line
-  discipline.  If you want to compile it as a module (irtty.o), say M
-  here and read <file:Documentation/modules.txt>.  IrTTY makes it
-  possible to use Linux's own serial driver for all IrDA ports that
-  are 16550 compatible.  Most IrDA chips are 16550 compatible so you
-  should probably say Y to this option.  Using IrTTY will however
-  limit the speed of the connection to 115200 bps (IrDA SIR mode).
-
-  If unsure, say Y.
-
-IrPORT IrDA serial driver
-CONFIG_IRPORT_SIR
-  Say Y here if you want to build support for the IrPORT IrDA device
-  driver. If you want to compile it as a module (irport.o), say M here
-  and read <file:Documentation/modules.txt>.  IrPORT can be used
-  instead of IrTTY and sometimes this can be better.  One example is
-  if your IrDA port does not have echo-canceling, which will work OK
-  with IrPORT since this driver is working in half-duplex mode only.
-  You don't need to use irattach with IrPORT, but you just insert it
-  the same way as FIR drivers (insmod irport io=0x3e8 irq=11).  Notice
-  that IrPORT is a SIR device driver which means that speed is limited
-  to 115200 bps.
-
-  If unsure, say Y.
-
-USB IrDA FIR dongle Device Driver
-CONFIG_USB_IRDA
-  Say Y here if you want to build support for the USB IrDA FIR Dongle
-  device driver.  If you want to compile it as a module (irda-usb.o),
-  say M here and read <file:Documentation/modules.txt>.  IrDA-USB
-  support the various IrDA USB dongles available and most of their
-  pecularities.  Those dongles plug in the USB port of your computer,
-  are plug and play, and support SIR and FIR (4Mbps) speeds.  On the
-  other hand, those dongles tend to be less efficient than a FIR
-  chipset.
-
-  Please note that the driver is still experimental.  And of course,
-  you will need both USB and IrDA support in your kernel...
-
-Winbond W83977AF IrDA Device Driver
-CONFIG_WINBOND_FIR
-  Say Y here if you want to build IrDA support for the Winbond
-  W83977AF super-io chipset.  This driver should be used for the IrDA
-  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
-  FIR (4Mbps) speeds.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  w83977af_ir.o.
-
-NSC PC87108/PC87338 IrDA Device Driver
-CONFIG_NSC_FIR
-  Say Y here if you want to build support for the NSC PC87108 and
-  PC87338 IrDA chipsets.  This driver supports SIR,
-  MIR and FIR (4Mbps) speeds.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  nsc-ircc.o.
-
-National Semiconductor DP83820 series driver
-CONFIG_NS83820
-  This is a driver for the National Semiconductor DP83820 series
-  of gigabit ethernet MACs.  Cards using this chipset include
-  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
-  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
-  zero copy.
-
-Toshiba Type-O IR Port device driver
-CONFIG_TOSHIBA_FIR
-  Say Y here if you want to build support for the Toshiba Type-O IR
-  chipset.  This chipset is used by the Toshiba Libretto 100CT, and
-  many more laptops.  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.  The module will be
-  called toshoboe.o.
-
-SMC IrCC
-CONFIG_SMC_IRCC_FIR
-  Say Y here if you want to build support for the SMC Infrared
-  Communications Controller.  It is used in the Fujitsu Lifebook 635t
-  and Sony PCG-505TX.  If you want to compile it as a module, say M
-  here and read <file:Documentation/modules.txt>.  The module will be
-  called smc-ircc.o.
-
-ALi M5123 FIR Controller Driver
-CONFIG_ALI_FIR
-  Say Y here if you want to build support for the ALi M5123 FIR
-  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
-  M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports
-  SIR, MIR and FIR (4Mbps) speeds.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The module will be called
-  ali-ircc.o.
-
-VLSI 82C147 PCI-IrDA Controller Driver
-CONFIG_VLSI_FIR
-  Say Y here if you want to build support for the VLSI 82C147
-  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
-  and 5500 notebooks. The driver provides support for SIR, MIR and
-  FIR (4Mbps) speeds.
-
-  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>. The module will be called vlsi_ir.o.
-
-Serial dongle support
-CONFIG_DONGLE
-  Say Y here if you have an infrared device that connects to your
-  computer's serial port. These devices are called dongles. Then say Y
-  or M to the driver for your particular dongle below.
-
-  Note that the answer to this question won't directly affect the
-  kernel: saying N will just cause the configurator to skip all
-  the questions about serial dongles.
-
-ESI JetEye PC dongle
-CONFIG_ESI_DONGLE
-  Say Y here if you want to build support for the Extended Systems
-  JetEye PC dongle.  If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.  The ESI dongle attaches
-  to the normal 9-pin serial port connector, and can currently only be
-  used by IrTTY.  To activate support for ESI dongles you will have to
-  start irattach like this: "irattach -d esi".
-
-ACTiSYS IR-220L and IR220L+ dongle
-CONFIG_ACTISYS_DONGLE
-  Say Y here if you want to build support for the ACTiSYS IR-220L and
-  IR220L+ dongles.  If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.  The ACTiSYS dongles
-  attaches to the normal 9-pin serial port connector, and can
-  currently only be used by IrTTY.  To activate support for ACTiSYS
-  dongles you will have to start irattach like this:
-  "irattach -d actisys" or "irattach -d actisys+".
-
-Tekram IrMate 210B dongle
-CONFIG_TEKRAM_DONGLE
-  Say Y here if you want to build support for the Tekram IrMate 210B
-  dongle.  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The Tekram dongle attaches to the
-  normal 9-pin serial port connector, and can currently only be used
-  by IrTTY.  To activate support for Tekram dongles you will have to
-  start irattach like this: "irattach -d tekram".
-
-Greenwich GIrBIL dongle
-CONFIG_GIRBIL_DONGLE
-  Say Y here if you want to build support for the Greenwich GIrBIL
-  dongle.  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The Greenwich dongle attaches to
-  the normal 9-pin serial port connector, and can currently only be
-  used by IrTTY.  To activate support for Greenwich dongles you will
-  have to insert "irattach -d girbil" in the /etc/irda/drivers script.
-
-Parallax LiteLink dongle
-CONFIG_LITELINK_DONGLE
-  Say Y here if you want to build support for the Parallax Litelink
-  dongle.  If you want to compile it as a module, say M here and read
-  <file:Documentation/modules.txt>.  The Parallax dongle attaches to
-  the normal 9-pin serial port connector, and can currently only be
-  used by IrTTY.  To activate support for Parallax dongles you will
-  have to start irattach like this "irattach -d litelink".
-
-Old Belkin dongle
-CONFIG_OLD_BELKIN_DONGLE
-  Say Y here if you want to build support for the Adaptec Airport 1000
-  and 2000 dongles.  If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.  The module will be
-  called old_belkin.o.  Some information is contained in the comments
-  at the top of <file:drivers/net/irda/old_belkin.c>.
-
-VME (Motorola and BVM) support
-CONFIG_VME
-  Say Y here if you want to build a kernel for a 680x0 based VME
-  board.  Boards currently supported include Motorola boards MVME147,
-  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-  BVME6000 boards from BVM Ltd are also supported.
-
-MVME147 support
-CONFIG_MVME147
-  Say Y to include support for early Motorola VME boards.  This will
-  build a kernel which can run on MVME147 single-board computers.  If
-  you select this option you will have to select the appropriate
-  drivers for SCSI, Ethernet and serial ports later on.
-
-MVME162, 166 and 167 support
-CONFIG_MVME16x
-  Say Y to include support for Motorola VME boards.  This will build a
-  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-  MVME177 boards.  If you select this option you will have to select
-  the appropriate drivers for SCSI, Ethernet and serial ports later
-  on.
-
-BVME4000 and BVME6000 support
-CONFIG_BVME6000
-  Say Y to include support for VME boards from BVM Ltd.  This will
-  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-  you select this option you will have to select the appropriate
-  drivers for SCSI, Ethernet and serial ports later on.
-
-Use write-through caching for 68060 supervisor accesses
-CONFIG_060_WRITETHROUGH
-  The 68060 generally uses copyback caching of recently accessed data.
-  Copyback caching means that memory writes will be held in an on-chip
-  cache and only written back to memory some time later.  Saying Y
-  here will force supervisor (kernel) accesses to use writethrough
-  caching.  Writethrough caching means that data is written to memory
-  straight away, so that cache and memory data always agree.
-  Writethrough caching is less efficient, but is needed for some
-  drivers on 68060 based systems where the 68060 bus snooping signal
-  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-  this problem.
-
-WD33C93 SCSI driver for MVME147
-CONFIG_MVME147_SCSI
-  Support for the on-board SCSI controller on the Motorola MVME147
-  single-board computer.
-
-SCC support for MVME147 serial ports
-CONFIG_MVME147_SCC
-  This is the driver for the serial ports on the Motorola MVME147
-  boards.  Everyone using one of these boards should say Y here.
-
-NCR53C710 SCSI driver for MVME16x
-CONFIG_MVME16x_SCSI
-  The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
-  SCSI controller chip.  Almost everyone using one of these boards
-  will want to say Y to this question.
-
-NCR53C710 SCSI driver for BVME6000
-CONFIG_BVME6000_SCSI
-  The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
-  SCSI controller chip.  Almost everyone using one of these boards
-  will want to say Y to this question.
-
-MVME147 (Lance) Ethernet support
-CONFIG_MVME147_NET
-  Support for the on-board Ethernet interface on the Motorola MVME147
-  single-board computer.  Say Y here to include the
-  driver for this chip in your kernel.   If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-MVME16x Ethernet support
-CONFIG_MVME16x_NET
-  This is the driver for the Ethernet interface on the Motorola
-  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
-  driver for this chip in your kernel.   If you want to compile it as
-  a module, say M here and read <file:Documentation/modules.txt>.
-
-BVME6000 Ethernet support
-CONFIG_BVME6000_NET
-  This is the driver for the Ethernet interface on BVME4000 and
-  BVME6000 VME boards.  Say Y here to include the driver for this chip
-  in your kernel.   If you want to compile it as a module, say M here
-  and read <file:Documentation/modules.txt>.
-
-CD2401 support for MVME166/7 serial ports
-CONFIG_SERIAL167
-  This is the driver for the serial ports on the Motorola MVME166,
-  167, and 172 boards.  Everyone using one of these boards should say
-  Y here.
-
-SCC support for MVME162 serial ports
-CONFIG_MVME162_SCC
-  This is the driver for the serial ports on the Motorola MVME162 and
-  172 boards.  Everyone using one of these boards should say Y here.
-
-SCC support for BVME6000 serial ports
-CONFIG_BVME6000_SCC
-  This is the driver for the serial ports on the BVME4000 and BVME6000
-  boards from BVM Ltd.  Everyone using one of these boards should say
-  Y here.
-
-7-Segment Display support
-CONFIG_DISPLAY7SEG
-  This is the driver for the 7-segment display and LED present on
-  Sun Microsystems CompactPCI models CP1400 and CP1500.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called display7seg.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  If you do not have a CompactPCI model CP1400 or CP1500, or
-  another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
-  you should say N to this option.
-
-# Choice: cristype
-Etrax-100-LX-v1
-CONFIG_ETRAX100LX
-  Support version 1 of the Etrax 100LX.
-
-Etrax-100-LX-v2
-CONFIG_ETRAX100LX_V2
-  Support version 2 of the Etrax 100LX.
-
-Etrax-100-LX-for-xsim-simulator
-CONFIG_SVINTO_SIM
-  Support the xsim ETRAX Simulator.
-
-DRAM size (dec, in MB)
-CONFIG_ETRAX_DRAM_SIZE
-  Size of DRAM (decimal in MB) typically 2, 8 or 16.
-
-ETRAX Flash Memory configuration
-CONFIG_ETRAX_FLASH_BUSWIDTH
-  Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
-
-LED configuration on PA
-CONFIG_ETRAX_PA_LEDS
-  The Etrax network driver is responsible for flashing LED's when
-  packets arrive and are sent.  It uses macros defined in
-  <file:include/asm-cris/io.h>, and those macros are defined after what
-  YOU choose in this option.  The actual bits used are configured
-  separately.  Select this if the LEDs are on port PA.  Some products
-  put the leds on PB or a memory-mapped latch (CSP0) instead.
-
-LED configuration on PB
-CONFIG_ETRAX_PB_LEDS
-  The Etrax network driver is responsible for flashing LED's when
-  packets arrive and are sent.  It uses macros defined in
-  <file:include/asm-cris/io.h>, and those macros are defined after what
-  YOU choose in this option.  The actual bits used are configured
-  separately.  Select this if the LEDs are on port PB.  Some products
-  put the leds on PA or a memory-mapped latch (CSP0) instead.
-
-LED configuration on CSP0
-CONFIG_ETRAX_CSP0_LEDS
-  The Etrax network driver is responsible for flashing LED's when
-  packets arrive and are sent. It uses macros defined in
-  <file:include/asm-cris/io.h>, and those macros are defined after what
-  YOU choose in this option.  The actual bits used are configured
-  separately.  Select this if the LEDs are on a memory-mapped latch
-  using chip select CSP0, this is mapped at 0x90000000.
-  Some products put the leds on PA or PB instead.
-
-No LED at all
-CONFIG_ETRAX_NO_LEDS
-  Select this option if you don't have any LED at all.
-
-First green LED bit
-CONFIG_ETRAX_LED1G
-  Bit to use for the first green LED.
-  Most Axis products use bit 2 here.
-
-First red LED bit
-CONFIG_ETRAX_LED1R
-  Bit to use for the first red LED.
-  Most Axis products use bit 3 here.
-  For products with only one controllable LED,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Second green LED bit
-CONFIG_ETRAX_LED2G
-  Bit to use for the second green LED. The "Active" LED.
-  Most Axis products use bit 4 here.
-  For products with only one controllable LED,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Second red LED bit
-CONFIG_ETRAX_LED2R
-  Bit to use for the second red LED.
-  Most Axis products use bit 5 here.
-  For products with only one controllable LED,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Third green LED bit
-CONFIG_ETRAX_LED3G
-  Bit to use for the third green LED. The "Drive" LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Third red LED bit
-CONFIG_ETRAX_LED3R
-  Bit to use for the third red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Fourth green LED bit
-CONFIG_ETRAX_LED4G
-  Bit to use for the fourth green LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Fourth red LED bit
-CONFIG_ETRAX_LED4R
-  Bit to use for the fourth red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Fifth green LED bit
-CONFIG_ETRAX_LED5G
-  Bit to use for the fifth green LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Fifth red LED bit
-CONFIG_ETRAX_LED5R
-  Bit to use for the fifth red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Sixth green LED bit
-CONFIG_ETRAX_LED6G
-  Bit to use for the sixth green LED. The "Drive" LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Sixth red LED bit
-CONFIG_ETRAX_LED6R
-  Bit to use for the sixth red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Seventh green LED bit
-CONFIG_ETRAX_LED7G
-  Bit to use for the seventh green LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Seventh red LED bit
-CONFIG_ETRAX_LED7R
-  Bit to use for the seventh red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Eighth yellow LED bit
-CONFIG_ETRAX_LED8Y
-  Bit to use for the eighth yellow LED. The "Drive" LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Ninth yellow LED bit
-CONFIG_ETRAX_LED9Y
-  Bit to use for the ninth yellow LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Tenth yellow LED bit
-CONFIG_ETRAX_LED10Y
-  Bit to use for the tenth yellow LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Eleventh yellow LED bit
-CONFIG_ETRAX_LED11Y
-  Bit to use for the eleventh yellow LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Twelfth red LED bit
-CONFIG_ETRAX_LED12R
-  Bit to use for the twelfth red LED.
-  For products with only one or two controllable LEDs,
-  set this to same as CONFIG_ETRAX_LED1G (normally 2).
-
-Flash LED off during activity
-CONFIG_ETRAX_LED_OFF_DURING_ACTIVITY
-  This option allows you to decide whether the network LED (and
-  Bluetooth LED in case you use Bluetooth) will be on or off when
-  the network is connected, and whether it should flash off or on
-  when there is activity. If you say y to this option the network
-  LED will be lit when there is a connection, and will flash off
-  when there is activity.
-
-PA button configuration
-CONFIG_ETRAX_PA_BUTTON_BITMASK
-  This is a bitmask with information about what bits on PA that
-  are used for buttons.
-  Most products has a so called TEST button on PA1, if that's true
-  use 02 here.
-  Use 00 if there are no buttons on PA.
-  If the bitmask is <> 00 a button driver will be included in the gpio
-  driver. Etrax general I/O support must be enabled.
-
-PA changeable direction bits
-CONFIG_ETRAX_PA_CHANGEABLE_DIR
-  This is a bitmask with information of what bits in PA that a user
-  can change direction on using ioctl's.
-  Bit set = changeable.
-  You probably want 00 here.
-
-PA changeable data bits
-CONFIG_ETRAX_PA_CHANGEABLE_BITS
-  This is a bitmask with information of what bits in PA that a user
-  can change change the value on using ioctl's.
-  Bit set = changeable.
-  You probably want 00 here.
-
-PA changeable direction bits
-CONFIG_ETRAX_PB_CHANGEABLE_DIR
-  This is a bitmask with information of what bits in PB that a user
-  can change direction on using ioctl's.
-  Bit set = changeable.
-  You probably want 00 here.
-
-PB changeable data bits
-CONFIG_ETRAX_PB_CHANGEABLE_BITS
-  This is a bitmask with information of what bits in PB that a user
-  can change the value on using ioctl's.
-  Bit set = changeable.
-  You probably want 00 here.
-
-Kernel debugger (kgdb)
-CONFIG_ETRAX_KGDB
-  The CRIS version of gdb can be used to remotely debug a running
-  Linux kernel via the serial debug port.  Provided you have gdb-cris
-  installed, run gdb-cris vmlinux, then type
-
-  (gdb) set remotebaud 115200           <- kgdb uses 115200 as default
-  (gdb) target remote /dev/ttyS0        <- maybe you use another port
-
-  This should connect you to your booted kernel (or boot it now if you
-  didn't before).  The kernel halts when it boots, waiting for gdb if
-  this option is turned on!
-
-Etrax bus waitstates
-CONFIG_ETRAX_DEF_R_WAITSTATES
-  Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
-  good choice for most Axis products...
-
-Etrax bus configuration
-CONFIG_ETRAX_DEF_R_BUS_CONFIG
-  Assorted bits controlling write mode, DMA burst length etc.  104 is
-  a good choice for most Axis products...
-
-Etrax SDRAM configuration
-CONFIG_ETRAX_SDRAM
-  Enable this if you use SDRAM chips and configure
-  R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
-
-DRAM size (dec, in MB)
-CONFIG_ETRAX_DEF_R_DRAM_CONFIG
-  The R_DRAM_CONFIG register specifies everything on how the DRAM
-  chips in the system are connected to the Etrax CPU.  This is
-  different depending on the manufacturer, chip type and number of
-  chips.  So this value often needs to be different for each Axis
-  product.
-
-Etrax DRAM timing
-CONFIG_ETRAX_DEF_R_DRAM_TIMING
-  Different DRAM chips have different speeds.  Current Axis products
-  use 50ns DRAM chips which can use the timing: 5611.
-
-Etrax SDRAM configuration
-CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
-  The R_SDRAM_CONFIG register specifies everything on how the SDRAM
-  chips in the system are connected to the Etrax CPU.  This is
-  different depending on the manufacturer, chip type and number of
-  chips.  So this value often needs to be different for each Axis
-  product.
-
-Etrax SDRAM timing
-CONFIG_ETRAX_DEF_R_SDRAM_TIMING
-  Different SDRAM chips have different timing.
-
-Etrax General port A direction
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR
-  Configures the direction of general port A bits.  1 is out, 0 is in.
-  This is often totally different depending on the product used.
-  There are some guidelines though - if you know that only LED's are
-  connected to port PA, then they are usually connected to bits 2-4
-  and you can therefore use 1c.  On other boards which don't have the
-  LED's at the general ports, these bits are used for all kinds of
-  stuff.  If you don't know what to use, it is always safe to put all
-  as inputs, although floating inputs isn't good.
-
-Etrax General port A data
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA
-  Configures the initial data for the general port A bits.  Most
-  products should use 00 here.
-
-Etrax General port B config
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG
-  Configures the type of the general port B bits.  1 is chip select,
-  0 is port.  Most products should use 00 here.
-
-Etrax General port B direction
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR
-  Configures the direction of general port B bits. 1 is out, 0 is in.
-  This is often totally different depending on the product used.  Bits
-  0 and 1 on port PB are usually used for I2C communication, but the
-  kernel I2C driver sets the appropriate directions itself so you
-  don't need to take that into consideration when setting this option.
-  If you don't know what to use, it is always safe to put all as
-  inputs.
-
-Etrax General port B data
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA
-  Configures the initial data for the general port A bits.  Most
-  products should use FF here.
-
-Etrax General port device
-CONFIG_ETRAX_GPIO
-  Enables the Etrax general port device (major 120, minors 0 and 1).
-  You can use this driver to access the general port bits. It supports
-  these ioctl's:
-        #include <linux/etraxgpio.h>
-       fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
-       ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
-       ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
-       val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL);
-  Remember that you need to setup the port directions appropriately in
-  the General configuration.
-
-Etrax parallel data support
-CONFIG_ETRAX_PARDATA
-  Adds support for writing data to the parallel port par0 of the ETRAX
-  100.  If you create a character special file with major number 126,
-  you can write to the data bits of par0.
-  Note: you need to disable Etrax100 parallel port support.
-
-Etrax parallel LCD (HD44780) Driver
-CONFIG_ETRAX_LCD_HD44780
-  Adds support for a HD44780 controlled LCD connected to the parallel
-  port par0 of the Etrax.
-
-Etrax Serial port ser0 support
-CONFIG_ETRAX_SERIAL
-  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
-  You probably want this enabled.
-
-/proc/serial entry
-CONFIG_ETRAX_SERIAL_PROC_ENTRY
-  Enables /proc/serial entry where errors and statistics can be
-  viewed.  CONFIG_PROC_FS must also be set for this to work.
-
-Etrax Serial port fast flush of DMA using fast timer API
-CONFIG_ETRAX_SERIAL_FAST_TIMER
-  Select this to have the serial DMAs flushed at a higher rate than
-  normally, possible by using the fast timer API, the timeout is
-  approx. 4 character times.
-  If unsure, say N.
-
-Etrax Serial port fast flush of DMA
-CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
-  Select this to have the serial DMAs flushed at a higher rate than
-  normally possible through a fast timer interrupt (currently at
-  15360 Hz).
-  If unsure, say N.
-
-Etrax Serial port receive flush timeout
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
-  Number of timer ticks between flush of receive fifo (1 tick = 10ms).
-  Try 0-3 for low latency applications.  Approx 5 for high load
-  applications (e.g. PPP).  Maybe this should be more adaptive some
-  day...
-
-Etrax Serial port ser0 DTR, RI, DSR and CD support on PB
-CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB
-  Enables the status and control signals DTR, RI, DSR and CD on PB for
-  ser0.
-
-Serial port 1 enabled
-CONFIG_ETRAX_SERIAL_PORT1
-  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
-
-Etrax Serial port ser1 DTR, RI, DSR and CD support on PB
-CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
-  Enables the status and control signals DTR, RI, DSR and CD on PB for
-  ser1.
-
-Serial port 2 enabled
-CONFIG_ETRAX_SERIAL_PORT2
-  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
-
-Etrax Serial port ser2 DTR, RI, DSR and CD support on PA
-CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA
-  Enables the status and control signals DTR, RI, DSR and CD on PA for
-  ser2.
-
-Serial port 3 enabled
-CONFIG_ETRAX_SERIAL_PORT3
-  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
-
-Etrax100 RS-485 support
-CONFIG_ETRAX_RS485
-  Enables support for RS-485 serial communication.  For a primer on
-  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-
-Etrax100 RS-485 mode on PA
-CONFIG_ETRAX_RS485_ON_PA
-  Control Driver Output Enable on RS485 tranceiver using a pin on PA
-  port:
-          Axis 2400/2401 uses PA 3.
-
-Etrax100 RS-485 mode on PA bit
-CONFIG_ETRAX_RS485_ON_PA_BIT
-  Control Driver Output Enable on RS485 tranceiver using a this bit
-  on PA port.
-
-Ser0 DTR on PB bit
-CONFIG_ETRAX_SER0_DTR_ON_PB_BIT
-  Specify the pin of the PB port to carry the DTR signal for serial
-  port 0.
-
-Ser0 RI  on PB bit
-CONFIG_ETRAX_SER0_RI_ON_PB_BIT
-  Specify the pin of the PB port to carry the RI signal for serial
-  port 0.
-
-Ser0 DSR on PB bit
-CONFIG_ETRAX_SER0_DSR_ON_PB_BIT
-  Specify the pin of the PB port to carry the DSR signal for serial
-  port 0.
-
-Ser0 CD  on PB bit
-CONFIG_ETRAX_SER0_CD_ON_PB_BIT
-  Specify the pin of the PB port to carry the CD signal for serial
-  port 0.
-
-Ser1 DTR on PB bit
-CONFIG_ETRAX_SER1_DTR_ON_PB_BIT
-  Specify the pin of the PB port to carry the DTR signal for serial
-  port 1.
-
-Ser1 RI  on PB bit
-CONFIG_ETRAX_SER1_RI_ON_PB_BIT
-  Specify the pin of the PB port to carry the RI signal for serial
-  port 1.
-
-Ser1 DSR on PB bit
-CONFIG_ETRAX_SER1_DSR_ON_PB_BIT
-  Specify the pin of the PB port to carry the DSR signal for serial
-  port 1.
-
-Ser1 CD  on PB bit
-CONFIG_ETRAX_SER1_CD_ON_PB_BIT
-  Specify the pin of the PB port to carry the CD signal for serial
-  port 1.
-
-Ser2 DTR on PA bit
-CONFIG_ETRAX_SER2_DTR_ON_PA_BIT
-  Specify the pin of the PA port to carry the DTR signal for serial
-  port 2.
-
-Ser2 RI  on PA bit
-CONFIG_ETRAX_SER2_RI_ON_PA_BIT
-  Specify the pin of the PA port to carry the RI signal for serial
-  port 2.
-
-Ser2 DSR on PA bit
-CONFIG_ETRAX_SER2_DSR_ON_PA_BIT
-  Specify the pin of the PA port to carry the DTR signal for serial
-  port 2.
-
-Ser2 CD  on PA bit
-CONFIG_ETRAX_SER2_CD_ON_PA_BIT
-  Specify the pin of the PA port to carry the CD signal for serial
-  port 2.
-
-Etrax100 RS-485 disable receiver
-CONFIG_ETRAX_RS485_DISABLE_RECEIVER
-  It's necessary to disable the serial receiver to avoid serial
-  loopback.  Not all products are able to do this in software only.
-  Axis 2400/2401 must disable receiver.
-
-Etrax100 I2C Support
-CONFIG_ETRAX_I2C
-  Enables an I2C driver on PB0 and PB1 on ETRAX100.
-  EXAMPLE usage:
-        i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
-       ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
-       i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
-       val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
-
-Etrax100 I2C configuration
-CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
-  Select whether to use the special I2C mode in the PB I/O register or
-  not.  This option needs to be selected in order to use some drivers
-  that access the I2C I/O pins directly instead of going through the
-  I2C driver, like the DS1302 realtime-clock driver.  If you are
-  uncertain, choose Y here.
-
-Etrax100 I2C EEPROM (NVRAM) support
-CONFIG_ETRAX_I2C_EEPROM
-  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
-  driver.  Select size option: Probed, 2k, 8k, 16k.
-  (Probing works for 2k and 8k but not that well for 16k)
-
-Etrax100 I2C EEPROM (NVRAM) size/16kB
-CONFIG_ETRAX_I2C_EEPROM_16KB
-  Use a 16kB EEPROM.
-
-Etrax100 I2C EEPROM (NVRAM) size/2kB
-CONFIG_ETRAX_I2C_EEPROM_2KB
-  Use a 2kB EEPROM.
-
-Etrax100 I2C EEPROM (NVRAM) size/8kB
-CONFIG_ETRAX_I2C_EEPROM_8KB
-  Use a 8kB EEPROM.
-
-Etrax100 I2C EEPROM (NVRAM) size/probe
-CONFIG_ETRAX_I2C_EEPROM_PROBE
-  Specifies size or auto probe of the EEPROM size.
-  Options: Probed, 2k, 8k, 16k.
-  (Probing works for 2k and 8k but not that well for 16k)
-
-Etrax DS1302 Real-Time Clock driver
-CONFIG_ETRAX_DS1302
-  Enables the driver for the DS1302 Real-Time Clock battery-backed
-  chip on some products.  The kernel reads the time when booting, and
-  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
-  rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
-  device, major 121.  You can check the time with cat /proc/rtc, but
-  normal time reading should be done using libc function time and
-  friends.
-
-Etrax DS1302 RST on the Generic Port
-CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
-  If your product has the RST signal line for the DS1302 RTC on the
-  Generic Port then say Y here, otherwise leave it as N in which
-  case the RST signal line is assumed to be connected to Port PB
-  (just like the SCL and SDA lines).
-
-Etrax DS1302 RST bit number
-CONFIG_ETRAX_DS1302_RSTBIT
-  This is the bit number for the RST signal line of the DS1302 RTC on
-  the selected port. If you have selected the generic port then it
-  should be bit 27, otherwise your best bet is bit 5.
-
-Etrax DS1302 SCL bit number
-CONFIG_ETRAX_DS1302_SCLBIT
-  This is the bit number for the SCL signal line of the DS1302 RTC on
-  Port PB. This is probably best left at 3.
-
-Etrax DS1302 SDA bit number
-CONFIG_ETRAX_DS1302_SDABIT
-  This is the bit number for the SDA signal line of the DS1302 RTC on
-  Port PB. This is probably best left at 2.
-
-Etrax 100 IDE Reset
-CONFIG_ETRAX_IDE_CSP0_8_RESET
-  Configures the pin used to reset the IDE bus.
-
-Etrax 100 IDE Reset
-CONFIG_ETRAX_IDE_CSPE1_16_RESET
-  Configures the pin used to reset the IDE bus.
-
-Etrax 100 ATA/IDE support
-CONFIG_ETRAX_IDE_DELAY
-  Sets the time to wait for disks to regain consciousness after reset.
-
-Etrax 100 IDE Reset
-CONFIG_ETRAX_IDE_G27_RESET
-  Configures the pin used to reset the IDE bus.
-
-IDE reset on PB Bit 7
-CONFIG_ETRAX_IDE_PB7_RESET
-  Configures the pin used to reset the IDE bus.
-
-USB 1.1 host
-CONFIG_ETRAX_USB_HOST
-  This option enables the host functionality of the ETRAX 100LX
-  built-in USB controller. In host mode the controller is designed
-  for CTRL and BULK traffic only, INTR traffic may work as well
-  however (depending on the requirements of timeliness).
-
-USB 1.1 host port 1 enabled
-CONFIG_ETRAX_USB_HOST_PORT1
-  This option enables port 1 of the ETRAX 100LX USB root hub (RH).
-
-USB 1.1 host port 2 enabled
-CONFIG_ETRAX_USB_HOST_PORT2
-  This option enables port 2 of the ETRAX 100LX USB root hub (RH).
-
-ETRAX 100LX 10/100Mbit Ethernet controller
-CONFIG_ETRAX_ETHERNET
-  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
-  controller.
-
-ETRAX 100LX Synchronous serial ports
-CONFIG_ETRAX_SYNCHRONOUS_SERIAL
-  This option enables support for the ETRAX 100LX built-in
-  synchronous serial ports. These ports are used for continuous
-  streamed data like audio. The default setting is compatible
-  with the STA 013 MP3 decoder, but can easily be tuned to fit
-  any other audio encoder/decoder and SPI.
-
-ETRAX 100LX Synchronous serial port 0 enabled
-CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0
-  Enables the ETRAX 100LX synchronous serial port 0 (syncser0).
-
-ETRAX 100LX Synchronous serial port 0 uses DMA
-CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA
-  Makes synchronous serial port 0 use DMA.
-
-ETRAX 100LX Synchronous serial port 1 enabled
-CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1
-  Enables the ETRAX 100LX synchronous serial port 1 (syncser1).
-
-ETRAX 100LX Synchronous serial port 1 uses DMA
-CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA
-  Makes synchronous serial port 1 use DMA.
-
-Delay for drives to regain consciousness
-CONFIG_IDE_DELAY
-  Number of seconds to wait for IDE drives to spin up after an IDE
-  reset.
-
-ARTPEC-1 support
-CONFIG_JULIETTE
-  The ARTPEC-1 is a video-compression chip used in the AXIS 2100
-  network camera, which is built around an ETRAX-100 board.  With this
-  option selected, the ETRAX kernel configures a DMA channel at boot
-  time to talk to the chip.
-
-Axis flash-map support
-CONFIG_ETRAX_AXISFLASHMAP
-  This option enables MTD mapping of flash devices.  Needed to use
-  flash memories.  If unsure, say Y.
-
-Byte-offset of partition table sector
-CONFIG_ETRAX_PTABLE_SECTOR
-  Byte-offset of the partition table in the first flash chip.
-  The default value is 64kB and should not be changed unless
-  you know exactly what you are doing. The only valid reason
-  for changing this is when the flash block size is bigger
-  than 64kB (e.g. when using two parallel 16 bit flashes).
-
-Enable Etrax100 watchdog
-CONFIG_ETRAX_WATCHDOG
-  Enable the built-in watchdog timer support on Etrax100 embedded
-  network computers.
-
-# Choice: crisdebug
-Serial-0
-CONFIG_ETRAX_DEBUG_PORT0
-  Choose a serial port for the ETRAX debug console.  Default to
-  port 0.
-
-Etrax debug port on ser1
-CONFIG_ETRAX_DEBUG_PORT1
-  Use serial port 1 for the console.
-
-Etrax debug port on ser2
-CONFIG_ETRAX_DEBUG_PORT2
-  Use serial port 2 for the console.
-
-Etrax debug port on ser3
-CONFIG_ETRAX_DEBUG_PORT3
-  Use serial port 3 for the console.
-
-No Etrax debug port
-CONFIG_ETRAX_DEBUG_PORT_NULL
-  Disable serial-port debugging.
-
-Parallel port support
-CONFIG_ETRAX_PARPORT
-  Say Y here to enable the ETRAX on-board parallel ports.
-
-Parallel port 0 enabled
-CONFIG_ETRAX_PARALLEL_PORT0
-  Say Y here to enable parallel port 0.
-
-Parallel port 1 enabled
-CONFIG_ETRAX_PARALLEL_PORT1
-  Say Y here to enable parallel port 1.
-
-# Choice: crisrescue
-Select a product rescue port
-CONFIG_ETRAX_RESCUE_SER0
-  Select one of the four serial ports as a rescue port.  The default
-  is port 0.
-
-Serial-1
-CONFIG_ETRAX_RESCUE_SER1
-  Use serial port 1 as the rescue port.
-
-Serial-2
-CONFIG_ETRAX_RESCUE_SER2
-  Use serial port 2 as the rescue port.
-
-Serial-3
-CONFIG_ETRAX_RESCUE_SER3
-  Use serial port 3 as the rescue port.
-
-RIO Hardware Watchdog support
-CONFIG_WATCHDOG_RIO
-  Say Y here to support the hardware watchdog capability on Sun RIO
-  machines.  The watchdog timeout period is normally one minute but
-  can be changed with a boot-time parameter.
-
-CP1XXX Hardware Watchdog support
-CONFIG_WATCHDOG_CP1XXX
-  This is the driver for the hardware watchdog timers present on
-  Sun Microsystems CompactPCI models CP1400 and CP1500.
-
-  This driver is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called cpwatchdog.o. If you want to compile it
-  as a module, say M here and read <file:Documentation/modules.txt>.
-
-  If you do not have a CompactPCI model CP1400 or CP1500, or
-  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
-  you should say N to this option.
-
-# Choice: ia64type
-Itanium
-CONFIG_ITANIUM
-  Select your IA64 processor type.  The default is Intel Itanium.
-
-McKinley
-CONFIG_MCKINLEY
-  Select this to configure for a McKinley processor.
-
-# Choice: ia64system
-IA-64 system type
-CONFIG_IA64_GENERIC
-  This selects the system type of your hardware.  A "generic" kernel
-  will run on any supported IA-64 system.  However, if you configure
-  a kernel for your specific system, it will be faster and smaller.
-
-  To find out what type of IA-64 system you have, you may want to
-  check the IA-64 Linux web site at <http://www.linux-ia64.org/>.
-  As of the time of this writing, most hardware is DIG compliant,
-  so the "DIG-compliant" option is usually the right choice.
-
-  HP-simulator   For the HP simulator
-                 (<http://software.hp.com/ia64linux/>).
-  SN1-simulator  For the SGI SN1 simulator.
-  DIG-compliant  For DIG ("Developer's Interface Guide") compliant
-                 system.
-
-  If you don't know what to do, choose "generic".
-
-# Choice: pagesize
-Kernel page size
-CONFIG_IA64_PAGE_SIZE_4KB
-  This lets you select the page size of the kernel.  For best IA-64
-  performance, a page size of 8KB or 16KB is recommended.  For best
-  IA-32 compatibility, a page size of 4KB should be selected (the vast
-  majority of IA-32 binaries work perfectly fine with a larger page
-  size).  For Itanium systems, do NOT chose a page size larger than
-  16KB.
-
-  4KB                For best IA-32 compatibility
-  8KB                For best IA-64 performance
-  16KB               For best IA-64 performance
-  64KB               Not for Itanium.
-
-  If you don't know what to do, choose 8KB.
-
-Enable Itanium A-step specific code
-CONFIG_ITANIUM_ASTEP_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with an A-step CPU.  You have an A-step CPU if the "revision" field
-  in /proc/cpuinfo is 0.
-
-Enable Itanium B-step specific code
-CONFIG_ITANIUM_BSTEP_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a B-step CPU.  You have a B-step CPU if the "revision" field in
-  /proc/cpuinfo has a value in the range from 1 to 4.
-
-Enable Itanium B0-step specific code
-CONFIG_ITANIUM_B0_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a B0-step CPU.  You have a B0-step CPU if the "revision" field
-  in /proc/cpuinfo is 1.
-
-Enable Itanium C-step specific code
-CONFIG_ITANIUM_CSTEP_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a C-step CPU.  You have a C-step CPU if the "revision" field in
-  /proc/cpuinfo is in the range of 5 to 8.
-
-Enable Itanium B1-step specific code
-CONFIG_ITANIUM_B1_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a B1-step CPU.  You have a B1-step CPU if the "revision" field
-  in /proc/cpuinfo is 2.
-
-Enable Itanium B2-step specific code
-CONFIG_ITANIUM_B2_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a B2-step CPU.  You have a B2-step CPU if the "revision" field
-  in /proc/cpuinfo is 3.
-
-Enable Itanium C0-step specific code
-CONFIG_ITANIUM_C0_SPECIFIC
-  Select this option to build a kernel for an Itanium prototype system
-  with a C0-step CPU.  You have a C0-step CPU if the "revision" field
-  in /proc/cpuinfo is 5.
-
-Force interrupt redirection
-CONFIG_IA64_HAVE_IRQREDIR
-  Select this option if you know that your system has the ability to
-  redirect interrupts to different CPUs.  Select N here if you're
-  unsure.
-
-Enable IA-64 Machine Check Abort
-CONFIG_IA64_MCA
-  Say Y here to enable machine check support for IA-64.  If you're
-  unsure, answer Y.
-
-Disable IA-64 Virtual Hash Page Table
-CONFIG_DISABLE_VHPT
-  The Virtual Hash Page Table (VHPT) enhances virtual address
-  translation performance.  Normally you want the VHPT active but you
-  can select this option to disable the VHPT for debugging.  If you're
-  unsure, answer N.
-
-Enable McKinley A-step specific code
-CONFIG_MCKINLEY_ASTEP_SPECIFIC
-  Select this option to build a kernel for an IA64 McKinley system
-  with any A-stepping CPU.
-
-Enable McKinley A0/A1-step specific code
-CONFIG_MCKINLEY_A0_SPECIFIC
-  Select this option to build a kernel for an IA64 McKinley system
-  with an A0 or A1 stepping CPU.
-
-Turn on compare-and-exchange bug checking (slow!)
-CONFIG_IA64_DEBUG_CMPXCHG
-  Selecting this option turns on bug checking for the IA64
-  compare-and-exchange instructions.  This is slow!  Itaniums
-  from step B3 or later don't have this problem. If you're unsure,
-  select N.
-
-IA64 IRQ bug checking
-CONFIG_IA64_DEBUG_IRQ
-  Selecting this option turns on bug checking for the IA64 irq_save
-  and restore instructions.  It's useful for tracking down spinlock
-  problems, but slow!  If you're unsure, select N.
-
-Early printk support (requires VGA!)
-CONFIG_IA64_EARLY_PRINTK
-  Selecting this option uses the VGA screen for printk() output before
-  the consoles are initialised.  It is useful for debugging problems
-  early in the boot process, but only if you have a VGA screen
-  attached.  If you're unsure, select N.
-
-Print possible IA64 hazards to console
-CONFIG_IA64_PRINT_HAZARDS
-  Selecting this option prints more information for Illegal Dependency
-  Faults, that is, for Read after Write, Write after Write or Write
-  after Read violations.  This option is ignored if you are compiling
-  for an Itanium A step processor (CONFIG_ITANIUM_ASTEP_SPECIFIC).  If
-  you're unsure, select Y.
-
-Performance monitor support
-CONFIG_PERFMON
-  Selects whether support for the IA-64 performance monitor hardware
-  is included in the kernel.  This makes some kernel data-structures a
-  little bigger and slows down execution a bit, but it is still
-  usually a good idea to turn this on.  If you're unsure, say N.
-
-/proc/pal support
-CONFIG_IA64_PALINFO
-  If you say Y here, you are able to get PAL (Processor Abstraction
-  Layer) information in /proc/pal.  This contains useful information
-  about the processors in your systems, such as cache and TLB sizes
-  and the PAL firmware version in use.
-
-  To use this option, you have to check that the "/proc file system
-  support" (CONFIG_PROC_FS) is enabled, too.
-
-Kernel support for IA-32 emulation
-CONFIG_IA32_SUPPORT
-  IA64 processors can run IA32 (that is, x86) binaries by emulating
-  the IA32 instruction set.  Say Y here to build in kernel support for
-  this.  If in doubt, say Y.
-
-/proc/efi/vars support
-CONFIG_EFI_VARS
-  If you say Y here, you are able to get EFI (Extensible Firmware
-  Interface) variable information in /proc/efi/vars.  You may read,
-  write, create, and destroy EFI variables through this interface.
-
-  To use this option, you have to check that the "/proc file system
-  support" (CONFIG_PROC_FS) is enabled, too.
-
-Directly Connected Compact Flash support
-CONFIG_CF_ENABLER
-  Compact Flash is a small, removable mass storage device introduced
-  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-  compile in support for Compact Flash devices directly connected to
-  a SuperH processor.  A Compact Flash FAQ is available at
-  <http://www.compactflash.org/faqs/faq.htm>.
-
-  If your board has "Directly Connected" CompactFlash at area 5 or 6,
-  you may want to enable this option.  Then, you can use CF as
-  primary IDE drive (only tested for SanDisk).
-
-  If in doubt, select 'N'.
-
-Kernel debugging
-CONFIG_DEBUG_KERNEL
-  Say Y here if you are developing drivers or trying to debug and
-  identify kernel problems.
-
-Debug memory allocations
-CONFIG_DEBUG_SLAB
-  Say Y here to have the kernel do limited verification on memory
-  allocation as well as poisoning memory on free to catch use of freed
-  memory.
-
-Memory mapped I/O debug support
-CONFIG_DEBUG_IOVIRT
-  Say Y here to get warned whenever an attempt is made to do I/O on
-  obviously invalid addresses such as those generated when ioremap()
-  calls are forgotten.  Memory mapped I/O will go through an extra
-  check to catch access to unmapped ISA addresses, an access method
-  that can still be used by old drivers that are being ported from
-  2.0/2.2.
-
-Spinlock debugging
-CONFIG_DEBUG_SPINLOCK
-  Say Y here and build SMP to catch missing spinlock initialization
-  and certain other kinds of spinlock errors commonly made.  This is
-  best used in conjunction with the NMI watchdog so that spinlock
-  deadlocks are also debuggable.
-
-Verbose BUG() reporting (adds 70K)
-CONFIG_DEBUG_BUGVERBOSE
-  Say Y here to make BUG() panics output the file name and line number
-  of the BUG call as well as the EIP and oops trace.  This aids
-  debugging but costs about 70-100K of memory.
-
-Include kgdb kernel debugger
-CONFIG_KGDB
-  Include in-kernel hooks for kgdb, the Linux kernel source level
-  debugger.  This project has a web page at
-  <http://kgdb.sourceforge.net/>.
-
-Include xmon kernel debugger
-CONFIG_XMON
-  Include in-kernel hooks for the xmon kernel monitor/debugger
-  supported by the PPC port.
-
-Include kgdb kernel debugger
-CONFIG_KWDB
-  Include in-kernel hooks for kdb, the source level debugger for the
-  PA-RISC port.
-
-IODC console
-CONFIG_IODC_CONSOLE
-  IODC is HP's pre-PCI standard for device identification (a la PCI
-  vendor, device IDs), detection, configuration, initialization and so
-  on.  It also can provide firmware function to do the actual IO,
-  which are slow, not really defined for runtime usage and generally
-  not desirable.
-
-  See <http://www.linuxhq.com/kernel/v2.4/doc/parisc/IODC.txt.html>
-  for the gory details.
-
-  Say Y here to enable use of the IODC firmware functions for console
-  I/O.  This is only useful on older PA-RISC workstations.  If in
-  doubt, say Y.
-
-U2/Uturn I/O MMU
-CONFIG_IOMMU_CCIO
-  Say Y here to enable DMA management routines for the first
-  generation of PA-RISC cache-coherent machines.  Programs the
-  U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
-
-LBA/Elroy PCI support
-CONFIG_PCI_LBA
-  Say Y here to give the PA-RISC kernel access to PCI configuration
-  and IO-port space on PA-RISC workstations equipped with a Lower Bus
-  Adapter (LBA).  This includes A, B, C, J, L, and N-class machines
-  with 4-digit model numbers, also the A300.
-
-LASI I/O support
-CONFIG_GSC_LASI
-  Say Y here to directly support the LASI controller chip found on
-  PA-RISC workstations.  Linux-oriented documentation for this chip
-  can be found at <http://www.parisc-linux.org/documentation/>.
-
-LASI/ASP builtin parallel-port
-CONFIG_PARPORT_GSC
-  Say Y here to build in low-level parallel-support for PC-style
-  hardware integrated in the LASI-Controller (on the GSC Bus) for
-  HP-PARISC workstations.
-
-Fujitsu Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_FUJITSU
-  Enable vendor-specific code for Fujitsu IDE disks.  Unless you are
-  the IDE maintainer, you probably do not want to mess with this.
-
-IBM Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_IBM
-  Enable vendor-specific code for IBM IDE disks.  Unless you are the
-  IDE maintainer, you probably do not want to mess with this.
-
-Maxtor Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_MAXTOR
-  Enable vendor-specific code for Maxtor IDE disks.  Unless you are
-  the IDE maintainer, you probably do not want to mess with this.
-
-Quantum Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_QUANTUM
-  Enable vendor-specific code for Quantum IDE disks.  Unless you are
-  the IDE maintainer, you probably do not want to mess with this.
-
-Seagate Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_SEAGATE
-  Enable vendor-specific code for Seagate IDE disks.  Unless you are
-  the IDE maintainer, you probably do not want to mess with this.
-
-Western Digital Vendor Specific
-CONFIG_BLK_DEV_IDEDISK_WD
-  Enable vendor-specific code for Western Digital IDE disks.  Unless
-  you are the IDE maintainer, you probably do not want to mess with
-  this.
-
-TiVo Commerial Application Specific
-CONFIG_BLK_DEV_TIVO
-  Enable vendor-specific code for TiVo IDE disks.  Unless you are the
-  IDE maintainer, you probably do not want to mess with this.
-
-# Choice: superhsys
-Generic
-CONFIG_SH_GENERIC
-  Select Generic if configuring for a generic SuperH system.
-  The "generic" option compiles in *all* the possible hardware
-  support and relies on the sh_mv= kernel commandline option to choose
-  at runtime which routines to use.  "MV" stands for "machine vector";
-  each of the machines below is described by a machine vector.
-
-  Select SolutionEngine if configuring for a Hitachi SH7709
-  or SH7750/7750S evalutation board.
-
-  Select Overdrive if configuring for a ST407750 Overdrive board.
-  More information at
-  <http://linuxsh.sourceforge.net/docs/7750overdrive.php3>.
-
-  Select HP620 if configuring for a HP Jornada HP620.
-  More information (hardware only) at
-  <http://www.hp.com/jornada/>.
-
-  Select HP680 if configuring for a HP Jornada HP680.
-  More information (hardware only) at
-  <http://www.hp.com/jornada/products/680/>.
-
-  Select HP690 if configuring for a HP Jornada HP690.
-  More information (hardware only) at
-  <http://www.hp.com/jornada/products/680/>.
-
-  Select CqREEK if configuring for a CqREEK SH7708 or SH7750.
-  More information at
-  <http://sources.redhat.com/ecos/hardware.html#SuperH>.
-
-  Select DMIDA if configuring for a DataMyte 4000 Industrial
-  Digital Assistant. More information at <http://www.dmida.com/>.
-
-  Select EC3104 if configuring for a system with an Eclipse
-  International EC3104 chip, e.g. the Harris AD2000 or Compaq Aero 8000.
-
-  Select Dreamcast if configuring for a SEGA Dreamcast.
-  More information at
-  <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
-  Dreamcast project is at <http://linuxdc.sourceforge.net/>.
-
-  Select BareCPU if you know what this means, and it applies
-  to your system.
-
-# These may have to be merged in when we go to CML2:
-#  - "SolutionEngine7751" for Hitachi SolutionEngine (7751)
-#  - "STB1_Harp" for STMicroelectronics HARP
-#  - "CqREEK" for CQ Publishing CqREEK SH-4
-#  - "CAT68701" for CAT 68701 Evaluation Board (SH7708)
-#  - "BigSur" for Big Sur Evaluation Board
-#  - "SH2000" for SH2000 Evaluation Board (SH7709A)
-#  - "ADX" for A&D ADX
-
-SolutionEngine
-CONFIG_SH_SOLUTION_ENGINE
-  Select SolutionEngine if configuring for a Hitachi SH7709
-  or SH7750 evalutation board.
-
-7751 SolutionEngine
-CONFIG_SH_7751_SOLUTION_ENGINE
-  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-  evalutation board.
-
-Overdrive
-CONFIG_SH_OVERDRIVE
-  Select Overdrive if configuring for a ST407750 Overdrive board.
-  More information at
-  <http://linuxsh.sourceforge.net/docs/7750overdrive.php3>.
-
-HP620
-CONFIG_SH_HP620
-  Select HP620 if configuring for a HP jornada HP620.
-  More information (hardware only) at
-  <http://www.hp.com/jornada/>.
-
-HP680
-CONFIG_SH_HP680
-  Select HP680 if configuring for a HP Jornada HP680.
-  More information (hardware only) at
-  <http://www.hp.com/jornada/products/680/>.
-
-HP690
-CONFIG_SH_HP690
-  Select HP690 if configuring for a HP Jornada HP690.
-  More information (hardware only)
-  at <http://www.hp.com/jornada/products/680/>.
-
-CqREEK
-CONFIG_SH_CQREEK
-  Select CqREEK if configuring for a CqREEK SH7708 or SH7750.
-  More information at
-  <http://sources.redhat.com/ecos/hardware.html#SuperH>.
-
-DMIDA
-CONFIG_SH_DMIDA
-  Select DMIDA if configuring for a DataMyte 4000 Industrial
-  Digital Assistant. More information at <http://www.dmida.com/>.
-
-EC3104
-CONFIG_SH_EC3104
-  Select EC3104 if configuring for a system with an Eclipse
-  International EC3104 chip, e.g. the Harris AD2000.
-
-Dreamcast
-CONFIG_SH_DREAMCAST
-  Select Dreamcast if configuring for a SEGA Dreamcast.
-  More information at
-  <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
-  Dreamcast project is at <http://linuxdc.sourceforge.net/>.
-
-BareCPU
-CONFIG_SH_UNKNOWN
-  "Bare CPU" aka "unknown" means an SH-based system which is not one
-  of the specific ones mentioned above, which means you need to enter
-  all sorts of stuff like CONFIG_MEMORY_START because the config
-  system doesn't already know what it is.  You get a machine vector
-  without any platform-specific code in it, so things like the RTC may
-  not work.
-
-  This option is for the early stages of porting to a new machine.
-
-# Choice: superhtype
-SH7707
-CONFIG_CPU_SUBTYPE_SH7707
-  Select the type of SuperH processor you have. This information is
-  used for optimizing and configuration purposes.
-
-  Select SH7707 if you have a  60 Mhz SH-3 HD6417707 CPU.
-
-  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
-                if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
-
-  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-  Select SH7751 if you have a SH7751
-
-  Select ST40STB1 if you have a ST40STB1
-
-SH7708
-CONFIG_CPU_SUBTYPE_SH7708
-  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
-                if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-SH7709
-CONFIG_CPU_SUBTYPE_SH7709
-  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
-
-SH7750
-CONFIG_CPU_SUBTYPE_SH7750
-  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-Physical memory start address
-CONFIG_MEMORY_START
-  Computers built with Hitachi SuperH processors always
-  map the ROM starting at address zero.  But the processor
-  does not specify the range that RAM takes.  
-
-  The physical memory (RAM) start address will be automatically
-  set to 08000000, unless you selected one of the following
-  processor types: SolutionEngine, Overdrive, HP620, HP680, HP690,
-  in which case the start address will be set to 0c000000.
-
-  Tweak this only when porting to a new machine which is not already
-  known by the config system.  Changing it from the known correct
-  value on any of the known systems will only lead to disaster.
-
-Hitachi HD64461 companion chip support
-CONFIG_HD64461
-  The Hitachi HD64461 provides an interface for
-  the SH7709 CPU, supporting a LCD controller,
-  CRT color controller, IrDA up to 4 Mbps, and a
-  PCMCIA controller supporting 2 slots.
-
-  More information is available at
-  <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
-
-  Say Y if you want support for the HD64461.
-  Otherwise, say N.
-
-HD64461 PCMCIA enabler
-CONFIG_HD64461_ENABLER
-  Say Y here if you want to enable PCMCIA support
-  via the HD64461 companion chip.
-  Otherwise, say N.
-
-HD64461 virtualized IRQ number
-CONFIG_HD64461_IRQ
-  The default setting of the HD64461 IRQ is 36.
-
-  Do not change this unless you know what you are doing.
-
-Hitachi HD64465 companion chip support
-CONFIG_HD64465
-  The Hitachi HD64465 provides an interface for
-  the SH7750 CPU, supporting a LCD controller,
-  CRT color controller, IrDA, USB, PCMCIA,
-  keyboard controller, and a printer interface.
-
-  More information is available at
-  <http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
-
-  Say Y if you want support for the HD64465.
-  Otherwise, say N.
-
-HD64465 virtualized IRQ number
-CONFIG_HD64465_IRQ
-  The default setting of the HD64465 IRQ is 5.
-
-  Do not change this unless you know what you are doing.
-
-HD64465 start address
-CONFIG_HD64465_IOBASE
-  The default setting of the HD64465 IO base address is 0xb0000000.
-
-  Do not change this unless you know what you are doing.
-  
-Early printk support
-CONFIG_SH_EARLY_PRINTK
-  Say Y here to redirect kernel printk messages to the serial port
-  used by the SH-IPL bootloader, starting very early in the boot
-  process and ending when the kernel's serial console is initialised.
-  This option is only useful porting the kernel to a new machine,
-  when the kernel may crash or hang before the serial console is
-  initialised. If unsure, say N.
-
-SuperH SCI (serial) support
-CONFIG_SH_SCI
-  Selecting this option will allow the Linux kernel to transfer data
-  over SCI (Serial Communication Interface) and/or SCIF (Serial
-  Communication Interface with FIFO) which are built into the Hitachi
-  SuperH processor.  The option provides 1 to 3 (depending
-  on the CPU model) standard Linux tty devices, /dev/ttySC[012]; one
-  of these is normally used as the system console.
-
-  If in doubt, press "y".
-
-Use LinuxSH standard BIOS
-CONFIG_SH_STANDARD_BIOS
-  Say Y here if your target has the gdb-sh-stub
-  package from www.m17n.org (or any conforming standard LinuxSH BIOS)
-  in FLASH or EPROM.  The kernel will use standard BIOS calls during
-  boot for various housekeeping tasks (including calls to read and
-  write characters to a system console, get a MAC address from an
-  on-board Ethernet interface, and shut down the hardware).  Note this
-  does not work with machines with an existing operating system in
-  mask ROM and no flash (WindowsCE machines fall in this category).
-  If unsure, say N.
-
-GDB Stub kernel debug
-CONFIG_DEBUG_KERNEL_WITH_GDB_STUB
-  If you say Y here, it will be possible to remotely debug the SuperH
-  kernel using gdb, if you have the gdb-sh-stub package from
-  www.m17n.org (or any conforming standard LinuxSH BIOS) in FLASH or
-  EPROM.  This enlarges your kernel image disk size by several
-  megabytes but allows you to load, run and debug the kernel image
-  remotely using gdb.  This is only useful for kernel hackers.  If
-  unsure, say N.
-
-Console output to GDB
-CONFIG_GDB_CONSOLE
-  If you are using GDB for remote debugging over a serial port and
-  would like kernel messages to be formatted into GDB $O packets so
-  that GDB prints them as program output, say 'Y'.
-
-CRC32 functions
-CONFIG_CRC32
-  This option is provided for the case where no in-kernel-tree
-  modules require CRC32 functions, but a module built outside the
-  kernel tree does. Such modules that use library CRC32 functions
-  require M here.
-
-802.1Q VLAN Support
-CONFIG_VLAN_8021Q
-  Select this and you will be able to create 802.1Q VLAN interfaces on your
-  ethernet interfaces.  802.1Q VLAN supports almost everything a regular
-  ethernet interface does, including firewalling, bridging, and of course
-  IP traffic.  You will need the 'vconfig' tool from the VLAN project in
-  order to effectively use VLANs.  See the VLAN web page for more
-  information:  http://www.candelatech.com/~greear/vlan.html  If unsure,
-  you can safely say 'N'.
-
-#
-# A couple of things I keep forgetting:
-#   capitalize: AppleTalk, Ethernet, DOS, DMA, FAT, FTP, Internet,
-#               Intel, IRQ, ISDN, Linux, MSDOS, NetWare, NetWinder,
-#               NFS, PCI, SCSI, SPARC
-#   two words:  file system, hard drive, hard disk, home page,
-#               user space, web site
-#   other:      it's safe to save; daemon; use --, not - or ---;
-#               use KB for 1024 bytes, not kB or K.
-#
-#
-# This is used by Emacs' spell checker ispell.el:
-#
-# LocalWords:  CONFIG coprocessor DX Pentium SX lilo loadlin HOWTO ftp ibiblio
-# LocalWords:  unc edu docs emu README kB BLK DEV FD Thinkpad fd MFM RLL IDE gz
-# LocalWords:  cdrom diskless netboot nfs xzvf ATAPI MB ide pavia rubini pl pd
-# LocalWords:  HD CD-ROMs IDECD NEC MITSUMI filesystem XT XD PCI BIOS cezar ATEN
-# LocalWords:  ISA EISA Microchannel VESA BIOSes IPC SYSVIPC ipc Ctrl dmesg hlt
-# LocalWords:  BINFMT Linkable http ac uk jo html GCC SPARC AVANTI CABRIOLET EB
-# LocalWords:  netscape gcc LD CC toplevel MODVERSIONS insmod rmmod modprobe IP
-# LocalWords:  genksyms INET loopback gatewaying Ethernet PPP ARP Arp MEMSIZE
-# LocalWords:  howto multicasting MULTICAST MBONE firewalling ipfw ACCT resp ip
-# LocalWords:  proc acct IPIP encapsulator decapsulator klogd RARP EXT PS
-# LocalWords:  telnetting subnetted NAGLE rlogin NOSR ttyS TGA techinfo mbone nl
-# LocalWords:  Mb SKB IPX Novell dosemu DDP ATALK vmalloc visar ehome
-# LocalWords:  SD CHR scsi thingy SG CD LUNs LUN jukebox Adaptec BusLogic EATA
-# LocalWords:  buslogic DMA DPT ATT eata dma PIO UltraStor fdomain umsdos ext
-# LocalWords:  QLOGIC qlogic TMC seagate Trantor ultrastor FASST wd NETDEVICES
-# LocalWords:  unix BBS linux CSLIP PLIP Kirch's LDP CSlip SL SCC IRQ csustan
-# LocalWords:  Turbo Laplink plip NCSA port's ReQuest IRQs EQL SMC AMD PCnet NE
-# LocalWords:  COM ELPLUS Com EtherLinkIII VLB Arcnet Cabletron DEPCA DE carlos
-# LocalWords:  depca EtherWorks EWRK ewrk SEEQ EtherExpress EEXPRESS NI xxx dia
-# LocalWords:  EtherExpress WaveLAN wavelan PCLAN HPLAN VG SK Ansel Xen de ZNET
-# LocalWords:  PCMCIA cb stanford LAN TEC RealTek ATP atp DLINK NetTools VISWS
-# LocalWords:  TR Sony CDU caddyless cdu Mitsumi MCD cd mcd XA MultiSession CDA
-# LocalWords:  Matsushita Panasonic SBPCD Soundblaster Longshine sbpcd Aztech
-# LocalWords:  Okano Wearnes AZTCD CDD SE aztcd sonycd Goldstar GSCD Philips fs
-# LocalWords:  LMS OPTCD Sanyo SJCD minix faqs xiafs XIA msdos mtools Cichocki
-# LocalWords:  std softlinks umssync NetworkFileSharing nfsd mountd CDs HPFS TI
-# LocalWords:  hpfs SYSV SCO iBCS Wyse WordPerfect tsx mit unixes sysv NR irisa
-# LocalWords:  SMB WfW Cyclades async mux Logitech busmouse MouseSystem aka AST
-# LocalWords:  PSMOUSE Compaq trackballs Travelmate Inport ATIXL ATI busmice ld
-# LocalWords:  gpm config QIC DYNCONF FTAPE Stor Ftape ftape pcsndrv manpage NT
-# LocalWords:  readprofile diskdrives org com masq EtherTalk tcp netrom sunacm
-# LocalWords:  misc AIC aic pio scc Portmaster eql GIS PhotoCDs MCDX Perell PG
-# LocalWords:  mcdx gscd optcd sjcd ISP hdparm Workgroups Lan samba PARIDE PCD
-# LocalWords:  filesystems smbfs ATA ppp PCTech RZ www powerquest txt CMD ESDI
-# LocalWords:  chipset FB multicast MROUTE appletalk ifconfig IBMTR multiport
-# LocalWords:  Multisession STALDRV EasyIO EC EasyConnection ISTALLION ONboard
-# LocalWords:  Brumby pci TNC cis ohio faq usenet dev hydra ca Tyne mem
-# LocalWords:  carleton DECstation SUNFD JENSEN Noname XXXM SLiRP LILO's amifb
-# LocalWords:  pppd Zilog ZS SRM bootloader ez mainmenu rarp ipfwadm paride pcd
-# LocalWords:  mknod xos MTU lwared Macs netatalk macs cs Wolff
-# LocalWords:  dartmouth flowerpt MultiMaster FlashPoint tudelft etherexpress
-# LocalWords:  ICL EtherTeam ETH IDESCSI TXC SmartRAID SmartCache httpd sjc dlp
-# LocalWords:  thesphere TwoServers BOOTP DHCP ncpfs BPQETHER BPQ MG HIPPI cern
-# LocalWords:  bsd comp SPARCstation le SunOS ie Gracilis PackeTwin PT pt LU FX
-# LocalWords:  FX TEAC CR LCS mS ramdisk IDETAPE cmd fperllo encis tcfs unisa
-# LocalWords:  Vertos Genoa Funai hsfs NCP NetWare tgz APM apm ioctls UltraLite
-# LocalWords:  TravelMate CDT LCD backlight VC RPC Mips AXP barlow cdrtools pg
-# LocalWords:  PMAX MILO Alphas Multia Tseng linuxelf endian mipsel mips drv HT
-# LocalWords:  kerneld callouts AdvanSys advansys Admin WDT DataStor EP verden
-# LocalWords:  wdt hdb hdc bugfix SiS vlb Acculogic CSA DTC dtc Holtek ht QDI
-# LocalWords:  QD qd UMC umc ALI ali lena fnet fr azstarnet cdr fb MDA ps esdi
-# LocalWords:  Avanti XL AlphaStations Jensen DECpc AXPpci UDB Cabriolet MCA RC
-# LocalWords:  AlphaPC mca AOUT OUTput PPro sipx gwdg lo nwe FourPort Boca unm
-# LocalWords:  Keepalive linefill RELCOM keepalive analogue CDR conf CDI INIT
-# LocalWords:  OPTi isp irq noisp VFAT vfat NTFS losetup dmsdosfs dosfs ISDN MP
-# LocalWords:  NOWAYOUT behaviour dialin isdn callback BTX Teles  XXXX LVM lvm
-# LocalWords:  ICN EDSS Cisco
-# LocalWords:  ipppd syncppp RFC MPP VJ downloaded icn NICCY Creatix shmem ufr
-# LocalWords:  ibp md ARCnet ether encap NDIS arcether ODI Amigas AmiTCP NetBSD
-# LocalWords:  initrd tue util DES funet des OnNet BIOSP smc Travan Iomega CMS
-# LocalWords:  FC DC dc PPA IOMEGA's ppa RNFS FMV Fujitsu ARPD arpd loran layes
-# LocalWords:  FRAD indiana framerelay DLCI DCLIs Sangoma SDLA mrouted sync sec
-# LocalWords:  Starmode Metricom MosquitoNet mosquitonet kbit nfsroot Digiboard
-# LocalWords:  DIGI Xe Xeve digiboard UMISC touchscreens mtu Ethernets HBAs MEX
-# LocalWords:  Shifflett netcom js jshiffle WIC DECchip ELCP EtherPower dst RTC
-# LocalWords:  rtc SMP lp Digi Intl RightSwitch DGRS dgrs AFFS Amiga UFS SDL AP
-# LocalWords:  Solaris RISCom riscom syncPPP PCBIT pcbit sparc anu au artoo MFB
-# LocalWords:  hitchcock Crynwr cnam pktdrvr NCSA's CyDROM CyCD-ROM FreeBSD NeXT
-# LocalWords:  NeXTstep disklabel disklabels SMD FFS tm AmigaOS diskfiles Un IQ
-# LocalWords:  Bernd informatik rwth aachen uae affs multihosting bytecode java
-# LocalWords:  applets applet JDK ncsa cabi SNI Alphatronix readme LANs scarab
-# LocalWords:  winsock RNIS caltech OSPF honour Honouring Mbit LocalTalk DEFRAG
-# LocalWords:  localtalk download Packetwin Baycom baycom interwork ASCII JNT
-# LocalWords:  Camtec proxying indyramp defragment defragmented UDP FAS FASXX
-# LocalWords:  FastSCSI SIO FDC qlogicfas QLogic qlogicisp setbaycom ife ee LJ
-# LocalWords:  ethz ch Travelmates ProAudioSpectrum ProAudio SoundMan SB SBPro
-# LocalWords:  Thunderboard SM OPL FM ADLIB TSR Gravis MPU PSS ADI SW DSP codec
-# LocalWords:  ADSP ESC ASIC daughtercard GUSMAX MSS NX AdLib Excell Ensoniq YM
-# LocalWords:  SoundScape Spea MediaTriX AudioTriX WSS OTI ThunderBoard VoxWare
-# LocalWords:  Soundscape SSCAPE TRIX MediaTrix PnP Maui dsp midixx EIA getty
-# LocalWords:  mgetty sendfax gert greenie muc lowlevel Lasermate LanManager io
-# LocalWords:  OOPSes trackball binghamton mobileip ncr IOMAPPED settags ns ser
-# LocalWords:  setsync NEGO MPARITY autotuning prefetch PIIX cdwrite utils rc
-# LocalWords:  PCWATCHDOG berkprod bitgate boldt ucsb jf kyoto jp euc Tetsuyasu
-# LocalWords:  YAMADA tetsu cauchy nslab ntt nevod perm su doc kaf kheops wsc
-# LocalWords:  traduc Bourgin dbourgin menuconfig kfill READMEs HOWTOs Virge WA
-# LocalWords:  IDEDISK IDEFLOPPY EIDE firewalls QMAGIC ZMAGIC LocalWords opti
-# LocalWords:  SVGATextMode vga svga Xkernel syr jmwobus comfaqs dhcp flakey GD
-# LocalWords:  IPv IPng interoperability ipng ipv radio's tapr pkthome PLP nano
-# LocalWords:  Ses Mhz sethdlc SOUNDMODEM WindowsSoundSystem smdiag pcf inka ES
-# LocalWords:  smmixer ptt circ soundmodem MKISS FDDI DEFEA DEFPA DEFXX redhat
-# LocalWords:  HyperNews khg mconv sed lina wuftpd MicroChannel netlink irc cum
-# LocalWords:  raudio RealAudio PPROP NETBIOS GUI IBMMCA ELMC Racal Interlan fi
-# LocalWords:  eth shapecfg src esp PCWD PREVSTAT bootparam sig bitwizard SBC
-# LocalWords:  downloads AFSK TCM FP Karn KA FSK RUH LinkSys cron mouseman LLC
-# LocalWords:  SyQuest SyQuest's CCITT MicroSolutions BPCD bpcd ESPSERIAL PROM
-# LocalWords:  SUNESP openprom OPENPROMIO quango themall al TT MC MMU LC RMW AA
-# LocalWords:  INSNS Ataris AutoConfig ZORRO OCS AMIFB Agnus Denise ECS CDTV GB
-# LocalWords:  AGA Cybervision CYBER GSP TMS DMI Zorro ACSI ROMs SLM BioNet GVP
-# LocalWords:  PAMsNet TekMagic Cyberstorm MkI CYBERSTORMII MkII BLZ onboard cx
-# LocalWords:  Village Tronic ATARILANCE RieblCard PAMCard VME MFP sangoma LAPB
-# LocalWords:  Rhotron BioData's Multiface AMIGAMOUSE COPCON Amiga's bitplanes
-# LocalWords:  ATARIMOUSE MFPSER SCC's MegaSTE ESCC Atari's GVPIOEXT DMASOUND
-# LocalWords:  fdutils cisco univercd rpcg htm iface lapb LAPBETHER tpqic qic
-# LocalWords:  SYNTH xd en binfmt aout ipip terra ipx sd sr sg wic framebuffer
-# LocalWords:  ibmmca lapbether mkiss dlci sdla fmv eepro eexpress ni hp ne es
-# LocalWords:  ibmtr isofs ROMFS romfs pcxx cyclades istallion psaux msbusmouse
-# LocalWords:  atixlmouse sbin softdog pcwd USS Lite ACI miroSOUND PCM miroPCM
-# LocalWords:  microcontroller miro Voxware downloading teles acsi slm gvp ltpc
-# LocalWords:  atari ariadne amigamouse atarimouse builtin IPDDP maths bradford
-# LocalWords:  AppleTalk Farallon PhoneNet Zubkoff lnz SCCB HAPN WANs vesafb nt
-# LocalWords:  wanrouter WANPIPE multiprotocol Mbps wanpipe EtherWORKS nodma SC
-# LocalWords:  smp HiSax SiemensChipSet Siemens AVM Elsa ITK hisax PCC MICROR
-# LocalWords:  Mircolink EURO DSS Spellcaster BRI sc spellcast Digiboards GPIO
-# LocalWords:  SYMBIOS COMPAT SDMS rev ASUS Tekram HX VX API ibmmcascsi ASY asy
-# LocalWords:  loader's PCnetPCI automounter AUTOFS amd autofs VT Gallant's Pnp
-# LocalWords:  AEDSP aedsp enskip tik Sysctl sysctl PARPORT parport pnp IDs EPP
-# LocalWords:  Autoprobe bart patrickr HDLS READBACK AB usr DAMA DS SparQ aten
-# LocalWords:  Symbios PCscsi tmscsim RoamAbout GHz Hinds contrib mathematik ok
-# LocalWords:  darmstadt okir DIGIEPCA International's Xem digiepca epca bootup
-# LocalWords:  zorro CAPI AVMB capi avmb VP SYN syncookies EM em pc Ethertalk
-# LocalWords:  Dayna DL Daynatalk LT PhoneNET ATB Daystar queueing CMDS SCBs ls
-# LocalWords:  SCB STATS Thinnet ThunderLAN TLAN Netelligent NetFlex tlan james
-# LocalWords:  caldera Preload Preloading slowdowns schoebel uni NBD nbd prog
-# LocalWords:  stuttgart rdist TRANS hostnames mango jukeboxes ESS userland PD
-# LocalWords:  hardlinked NAMETRANS env mtab fstab umount nologin runlevel gid
-# LocalWords:  adm Nodename hostname uname Kernelname bootp nmi DI OV StegFS
-# LocalWords:  KERNNAME kname ktype kernelname Kerneltype KERNTYPE Alt RX mdafb
-# LocalWords:  dataless kerneltype SYSNAME Comtrol Rocketport palmtop fbset EGS
-# LocalWords:  nvram SYSRQ SysRq PrintScreen sysrq NVRAMs NvRAM Shortwave RTTY
-# LocalWords:  Sitor Amtor Pactor GTOR hayes TX TMOUT JFdocs BIGMEM DAC IRQ's
-# LocalWords:  IDEPCI IDEDMA PDC pdc TRM trm raidtools luthien nuclecu BAGET VR
-# LocalWords:  unam mx miguel koobera uic EMUL solaris pp ieee lpsg co DMAs TOS
-# LocalWords:  BLDCONFIG preloading jumperless BOOTINIT modutils multipath GRE
-# LocalWords:  misconfigured autoconfiguration IPGRE ICMP tracert ipautofw PIM
-# LocalWords:  netis rlynch autofw ipportfw monmouth ipsubs portforwarding pimd
-# LocalWords:  portfw PIMSM netweb usc pim pf EUI aggregatable PB decapsulate
-# LocalWords:  ipddp Decapsulation DECAP bool HAMRADIO tcpdump af CDs tx FBCON
-# LocalWords:  ethertap multisession PPC MMIO GDT GDTH ICP gdth hamradio  bpp
-# LocalWords:  lmh weejock AIMSlab RadioTrack RTRACK HZP OptoSCC TRX rx TRXECHO
-# LocalWords:  DMASCC paccomm dmascc addr cfg oevsv oe kib picpar FDX baudrate
-# LocalWords:  baudrates fdx HDX hdx PSK kanren frforum QoS SCHED CBQ SCH sched
-# LocalWords:  sch cbq CSZ Shenker Zhang csz SFQ sfq TBF tbf PFIFO fifo PRIO RW
-# LocalWords:  prio Micom xIO dwmw rimi OMIRR omirr omirrd unicode ntfs cmu NIC
-# LocalWords:  Braam braam Schmidt's freiburg nls codepages codepage Romanian
-# LocalWords:  Slovak Slovenian Sorbian Nordic iso Catalan Faeroese Galician SZ
-# LocalWords:  Valencian Slovene Esperanto Estonian Latvian Belarusian KOI mt
-# LocalWords:  charset Inuit Greenlandic Sami Lappish koi Alexey Kuznetsov's sa
-# LocalWords:  Specialix specialix DTR RTS RTSCTS cycladesZ Exabyte ftape's inr
-# LocalWords:  Iomega's LBFM claus ZFTAPE VFS zftape zft William's lzrw DFLT kb
-# LocalWords:  MTSETBLK MTIOCTOP qft setblk zftape's tar's afio's setdrvbuffer
-# LocalWords:  Procfs Exabyte's THR FCD sysvinit init PSC pscwdt VMIDI Euro SAB
-# LocalWords:  Mostek Fastlane PowerMac PReP PMAC PowerPC Macintoshes Starmax
-# LocalWords:  PowerStack Starmaxes MCOMMON DEVICETREE ATY IMS IMSTT videodev
-# LocalWords:  BT Hauppauge STB bttv Quickcam BW BWQCAM bw qcam Mediavision PMS
-# LocalWords:  pms Avatar Freecom Imation Superdisk BPCK bpck COMM comm DSTR ru
-# LocalWords:  dstr EPAT EPEZ epat EPIA epia FreeCom FRPW frpw KingByte KBIC HW
-# LocalWords:  KingByte's kbic OnSpec ValuStore FASTROUTE fastroute FLOWCONTROL
-# LocalWords:  struct APIC realtime OSs LynxOS CNC tmp cvf HFS hfs ADFS Risc os
-# LocalWords:  adfs ncpmount namespace SUBDIR reexport NDS kcore FT SPX spx DAT
-# LocalWords:  interserver BLKSZ NUMBUFFERS apmd Tadpole ANA roestock QuickCam
-# LocalWords:  isapnptools Colour CQCAM colour Connectix QuickClip prive mentre
-# LocalWords:  KMOD kmod conformant utexas kharker UnixWare Mwave cgi cl ts ibm
-# LocalWords:  eXchange threepio oakland simtel pre ULTRAMCA EtherLink isa luik
-# LocalWords:  EtherLink OpenBSD pts DEVPTS devpts ptmx ttyp glibc readback SA
-# LocalWords:  mwave OLDCARD isdnloop linklevel loopctrl Eicon Diehl DIEHLDIVA
-# LocalWords:  ASUSCOM AsusCom TELEINT semiactiv Sedlbauer Sportster TA MIC ITH
-# LocalWords:  NETjet NetJet Niccy Neuhaus sparcs AOC AOCD AOCE Microlink SAA
-# LocalWords:  teletext WinTV saa iproute tc Quadra Performa PowerBook tor AUN
-# LocalWords:  setserial compsoc steve Econet econet AUNUDP psched TEQL TLE CLS
-# LocalWords:  teql FW Ingres TwistedPair MTRR MTRRs mtrr cfs crypto TD ktti KT
-# LocalWords:  PHd ICS ipchains adelaide rustcorp syslog Cumana steganography
-# LocalWords:  AcornSCSI EcoSCSI EESOX EESOXSCSI Powertec POWERTECSCSI dec SF
-# LocalWords:  RadioReveal gatekeeper aimslab aztech FMI sf fmi RTL rtl cesdis
-# LocalWords:  Yellowfin gsfc nasa gov yellowfin pcnet Mylex LNE lne EtherH hs
-# LocalWords:  EBSA chattr RiscOS Winmodem AGP Atomwide DUALSP pcsp robinson CT
-# LocalWords:  SGALAXY Waverider DSPxxx TRXPRO AudioTrix OSWF MOT CFB DSY kbps
-# LocalWords:  tuwien kkudielk LVD mega lun MAXTAGS Gbps arcnet Olicom SNA PAE
-# LocalWords:  SysKonnect tms sna etherboot ufs NetBEUI MultiSound MSNDCLAS GX
-# LocalWords:  MSNDINIT MSNDPERM MSNDPIN PNDSPINI PNDSPERM Ensoniq's RetinaZ SS
-# LocalWords:  AudioPCI lspci SonicVibes sonicvibes SPARCs roadrunner CLgen UPA
-# LocalWords:  swansea shtml Zoltrix zoltrix BINUTILS EGCS binutils VIDC DACs
-# LocalWords:  CyberVision Cirrus PowerBooks Topcat SBUS CGsix TurboGX BWtwo SS
-# LocalWords:  CGthree TCX unswappable vfb fbcon hicolor truecolor AFB ILBM SOC
-# LocalWords:  IPLAN gracilis Fibre SBus SparcSTORAGE SV jnewbigin swin QNX qnx
-# LocalWords:  PTY PTYS ptyxx ttyxx PTYs ssh sb Avance ALS pss pvv kerneli hd
-# LocalWords:  synth WaveFront MSND NONPNP AudioExcelDSP STRAM APUS CHRP MBX Nx
-# LocalWords:  PowerMac's BMAC radiotrack rtrack miropcm OFFBOARD HPT UDMA DVD
-# LocalWords:  hpt fokus gmd Cyrix DXL SLC DLC NexGen MediaGX GXm IDT WinChip
-# LocalWords:  MMX MII valkyrie mdacon vdolive VDOLive cuseeme CU hippi rrunner
-# LocalWords:  SeeMe ipmasqadm juanjox ipmarkfw markfw TNCs Microdyne rhine lib
-# LocalWords:  libc jsX gamepad gameport CHF FCS FPGaming MadCatz ASSASIN GrIP
-# LocalWords:  Assasin gamepads GamePad PDPI gamecards gamecard WingMan BSP WCS
-# LocalWords:  ThunderPad CyberMan SideWinder ThrustMaster DirectConnect NES XF
-# LocalWords:  Millenium SNES PSX Multisystem Nintendo PlayStation Amstrad CPC
-# LocalWords:  Sega TurboGraFX Steffen Schwenke Multiststem PDIF FIFOSIZE EPLUS
-# LocalWords:  PowerUP RoadRunner tahallah dos functionkey setterm imladris Woz
-# LocalWords:  PowerMacs Winbond Algorithmics ALGOR algor ECOFF IRIX SGI SGI's
-# LocalWords:  gfx virtualized Xpmac mklinux XFree FBDev Woodhouse mvhi Seeq fp
-# LocalWords:  SGISEEQ HIgh ADB ADBMOUSE crosscompiler CROSSCOMPILE FPE GDB gdb
-# LocalWords:  JOYPORT rp spoofing DawiControl NOGENSUPP EEPROM HSSI Alessandro
-# LocalWords:  singleprocessor tex MATHEMU FRIQ Maxell friq Alcor XLT AlphaBook
-# LocalWords:  AlphaPCI DP LX Miata Mikasa Noritake RPX UX BX Takara EV PRIMO
-# LocalWords:  TSC Matrox Productiva matroxfb matrox multihead ia linuxhq MFW
-# LocalWords:  mfw AAA MCS Initio XXU initio imm AutoDetect IZIP CTR usec HDLC
-# LocalWords:  COSA SRP muni cz kas cosa Alteon AceNIC acenic VTOC OSes GMT SAx
-# LocalWords:  Inspiron localtime INTS Thinkpads Ralf Brown's Flightstick NNN
-# LocalWords:  Xterminator Blackhawk NN mpu ioports DCA HPDCA HPLANCE DIO Corel
-# LocalWords:  GemTek gemtek CMDLINE IrDA PDA's irmanager irattach RR AVA DN rg
-# LocalWords:  uit dagb irda LSAP IrLMP RR's IrLAP IR alloc skb's kfree skb's
-# LocalWords:  GZIP IrLAN NetbeamIR ESI JetEye IrOBEX IrCOMM TTY's minicom dti
-# LocalWords:  ircomm ircomm pluto thiguchi IrTTY Linux's bps NetWinder MIR NSC
-# LocalWords:  ACTiSYS dongle dongles esi actisys IrMate tekram BVM MVME
-# LocalWords:  BVME BVME WRITETHROUGH copyback writethrough fwmark syncookie tu
-# LocalWords:  alphalinux GOBIOS csn chemnitz nat ACARD AMI MegaRAID megaraid
-# LocalWords:  QNXFS ISI isicom xterms Apollos VPN RCPCI rcpci sgi visws pcmcia
-# LocalWords:  IrLPT UIRCC Tecra Strebel jstrebel suse Eichwalder ke INI INIA
-# LocalWords:  FCP qlogicfc sym isapnp DTLK DoubleTalk rcsys dtlk DMAP SGIVW ar
-# LocalWords:  dmabuf EcoRadio MUTEFREQ GIrBIL girbil tepkom vol mha diplom PQS
-# LocalWords:  bmac Microgate SyncLink synclink hdlc excl ioaddr Tane tanep TCQ
-# LocalWords:  PDS SMALLDOS charsets bigfoot kernelfr mcs cls fw rsvp SKnet sk
-# LocalWords:  SKMC USB UHCI OHCI intel compaq usb ohci HCD Virt Compaq's hcd
-# LocalWords:  VROOTHUB KBD ARRs MCRs NWBUTTON nwbutton NUM WaveArtist APNE cpu
-# LocalWords:  apne blackhawke PlanB lu mlan planb NWFPE FPA nwfpe unbootable
-# LocalWords:  FPEmulator ds vmlinux initialization discardable pgtable PGT mdw
-# LocalWords:  quicklist pagetable arthur StrongARM podule podules Autodetect
-# LocalWords:  dodgy IrPORT irport Litelink litelink SuSE rtfm internet hda CY
-# LocalWords:  multmode DriveReady SeekComplete DriveStatusError miscompile AEC
-# LocalWords:  mainboard's Digital's alim FastTrak aec PIIXn piix Gayle Eyetech
-# LocalWords:  Catweasel IDEDOUBLER Powerbook Centris ICSIDE RapIDE OSM HDM IOP
-# LocalWords:  HDM's OSM's lan FibreChannel ECP autoprobe itg lbl ipmasq cjb IC
-# LocalWords:  bieringer Caulfield's dreamtime decnet SIOCFIGCONF SIOCGIFCONF
-# LocalWords:  rtnetlink Endnode Aironet Arlan Telxon ylenurme arlan ACB aeschi
-# LocalWords:  Sealevel sealevel Cyclom br wanconfig tarball conectiva cycsyn
-# LocalWords:  devel bazar cyclomx NetGear GA IBMOL Lanstreamer uhci eu efs CYZ
-# LocalWords:  olympic linuxtr usbcore acm EZUSB downloader EFS XFS INTR op IIC
-# LocalWords:  heine soundcore JavaStations JavaStation GemTeks TerraTec TODO
-# LocalWords:  ActiveRadio Standalone terratec Rolf Offermanns rolf offermanns
-# LocalWords:  Zoran ZR Buz LML CPQ DA cpqarray PPDEV deviceid vlp ppdev atyfb
-# LocalWords:  AcceleRAID eXtremeRAID NETFILTER Netfilter masqueraded netfilter
-# LocalWords:  kernelnotes Cardbus PCMCIA's CardBus clgenfb Permedia YAM MMAP
-# LocalWords:  mmapped ATM atm PVCs SVCs InARP ATMARP neighbour neighbours MPOA
-# LocalWords:  VCs ENI FPGA Tonga MMF MF UTP printks ZeitNet ZN ZATM uPD SAR PN
-# LocalWords:  approx NICStAR NICs ForeRunnerLE Madge Collage ATMizer Dxxxx VCI
-# LocalWords:  ServeRAID IPS ips ipslinux gzip BSDCOMP LZW RAYCS Interphase app
-# LocalWords:  Tachyon IPHASE Surfboard NextLevel SURFboard jacksonville Tigon
-# LocalWords:  fventuri adelphia siglercm linuxpower AceNICs Starfire starfire
-# LocalWords:  ISOC CPiA cpia uss ACPI UDF DirectCD udf CDRW's OSF Manx acpi DM
-# LocalWords:  Unixware cymru Computone IntelliPort Intelliport computone SI sx
-# LocalWords:  adbmouse DRI DRM dlabs GMX PLCs Applicom fieldbus applicom int
-# LocalWords:  VWSND eg ESSSOLO CFU CFNR scribed eiconctrl eicon hylafax KFPU
-# LocalWords:  EXTRAPREC fpu mainboards KHTTPD kHTTPd khttpd Xcelerator SBNI tw
-# LocalWords:  LOGIBUSMOUSE Granch granch sbni Raylink NOHIGHMEM Athlon SIM sim
-# LocalWords:  hpl Tourrilhes DuraLAN starfire Davicom davicom dmfe auk tms tr
-# LocalWords:  TokenExpress Belkin Peracom eTek DVDs infradead Cxxx Adlib AV ZX
-# LocalWords:  NeoMagic CPi CPt Celeron decapsulation Undeletion BFS bfs nVidia
-# LocalWords:  OnStream Irongate Riva phonedev QuickNet LineJack PhoneJack IXJ
-# LocalWords:  Quicknet PhoneJACK LineJACK ixj pnpdump Quicknet's Joandi SSID
-# LocalWords:  aironet quickconfig adhoc btw bap NONCS cardservices Xircom lin
-# LocalWords:  Netwave AirSurfer netwave HomePNA failover MVP iMacs ALi aktual
-# LocalWords:  Aladin HIDBP usbkbd KEYBDEV MOUSEDEV JOYDEV EVDEV UAB WhiteHEAT
-# LocalWords:  Handspring ov DABUSB URB URB's dabusb CRAMFS NFSv ELV IOAPIC WIP
-# LocalWords:  NLMv SMBus ALGOBIT algo PHILIPSPAR philips elv Velleman velleman
-# LocalWords:  ALGOPCF Elektor elektor CHARDEV dfx TDFX tdfx Extensa dof gravis
-# LocalWords:  assasin logitech Overdrive thrustmaster DWave Aureal magellan db
-# LocalWords:  SpaceTec SpaceOrb SpaceBall spaceorb FLX spaceball turbografx zr
-# LocalWords:  amiga ESS's WaveWatcher Maxi belkin RW's ata glx GART MPV Baget
-# LocalWords:  OpenGL Xserver agpgart HOTPLUG CyberPro Integraphics Netwinder
-# LocalWords:  aty FONTWIDTH eni zatm nicstar ForeRunner OC DECstations DEC's
-# LocalWords:  PHYsical SUNI reinsertion ChipSAR KVC PHY ClassID iphase iadbg
-# LocalWords:  DEVS FireWire PCILynx pcilynx LOCALRAM miro's DV RAWIO GRED Mk
-# LocalWords:  Diffserv DSMARK Ingress Qdisc TCINDEX TMSPCI tmspci Ringode JE
-# LocalWords:  MADGEMC madgemc TokenRing SMCTR TokenCard smctr Wacom Graphire
-# LocalWords:  mousedev ConnectTech HandSpring Xirlink IBMCAM ibmcam SN
-# LocalWords:  DEVICEFS yyy Cymraeg Dwave SIMM JSFLASH JavaStation's multilink
-# LocalWords:  nsc ircc DDB Vrc CMN TB PROMs Vino rivafb DDC Matroxes MGA TVO
-# LocalWords:  MAVEN fbdev crtc maven matroxset NTSC PCA SBA AAL SKFP DAS SAS
-# LocalWords:  skfp Intuos ADMtek's pegasus PLUSB plusb pointopoint mp rio Xeon
-# LocalWords:  DEVFS devfs dd bs EDSS german TELESPCI FRITZPCI HFC HFCS BDS HST
-# LocalWords:  ISURF ISAR Saphir HSTSAPHIR Telekom BKM Scitel Quadro SCT Gazel
-# LocalWords:  SP PRI Hypercope HYSDN Hypercope's hysdn IbssJoinNetTimeout FTDI
-# LocalWords:  ARCNet Keyspan PDA ADMtek sgalaxy sgbase opl mpuio mpuirq sbio
-# LocalWords:  sbirq sbdma gus uart mssio mssirq mssdma sscape maui mouirq iph
-# LocalWords:  CHDLC UPS's usbmouse wacom wmforce keybdev joydev fibre Trunking
-# LocalWords:  Etherchannel IOC Moxa Intellio moxa SmartIO mxser Mixcom EFI ir
-# LocalWords:  MIXCOMWD mixcomwd SENDCOMPLETE GMAC iBook gmac OAKNET oaknet PCG
-# LocalWords:  diffserv irlan irtty toshoboe IrCC Lifebook idex AUTODMA FIP Cxx
-# LocalWords:  Yenta Databook TCIC FMVJ fmvj NMCLAN LiveWire nmclan XIRC xirc
-# LocalWords:  loadkeys setfont shm SuperIO soc SOCAL socal FCAL fc fcal COMX
-# LocalWords:  MultiGate ITConsult comx CMX HiCOMX downloadable hw LoCOMX PROTO
-# LocalWords:  locomx MixCOM mixcom proto MyriCOM MYRI Sbus myri sbus IBMLS hme
-# LocalWords:  lanstreamer baseT HAPPYMEAL qfe sunhme SUNLANCE sunlance BigMAC
-# LocalWords:  SUNBMAC sunbmac QuadEthernet SUNQE qe FastEthernet sunqe DSB PTI
-# LocalWords:  DSBR dsbr procinfo QLOGICPTI qpti ptisp QLGC qlogicpti se LBA NF
-# LocalWords:  OPENPROMFS OpenPROM openpromfs OBP OpenBoot flashable Multiboard
-# LocalWords:  SPARCAUDIO SparcClassic Ultras DBRI Sparcbook sparcaudio SUNBPP
-# LocalWords:  UltraDMA WDC CRC CONNTRACK IPTABLES iptables nfmark interface's
-# LocalWords:  tdfxfb TNTx HGA hgafb VERBOSEDEBUG SunTrunking SunSoft XIRTULIP
-# LocalWords:  ethercards PNIC Macronix MXIC ASIX xircom Mustek MDC gphoto mdc
-# LocalWords:  CramFs Cramfs uid cramfs AVM's kernelcapi PCIV cdrdao Cdparanoia
-# LocalWords:  DMX Domex dmx wellington ftdi sio Accton Billington Corega FEter
-# LocalWords:  MELCO LUA PNA Linksys SNC chkdsk AWACS Webcam RAMFS Ramfs ramfs
-# LocalWords:  ramfiles MAKEDEV pty WDTPCI APA apa
-#
-# The following sets edit modes for GNU EMACS
-# Local Variables:
-# case-fold-search:nil
-# fill-prefix:"  "
-# adaptive-fill:nil
-# fill-column:70
-# End:
diff -urN linux-2.5.3-pre4/Documentation/i386/boot.txt linux/Documentation/i386/boot.txt
--- linux-2.5.3-pre4/Documentation/i386/boot.txt	Wed Nov  7 14:46:01 2001
+++ linux/Documentation/i386/boot.txt	Thu Jan 24 12:35:29 2002
@@ -2,7 +2,7 @@
 		     ----------------------------
 
 		    H. Peter Anvin <hpa@zytor.com>
-			Last update 2000-10-29
+			Last update 2002-01-01
 
 On the i386 platform, the Linux kernel uses a rather complicated boot
 convention.  This has evolved partially due to historical aspects, as
@@ -25,12 +25,15 @@
 Protocol 2.01:	(Kernel 1.3.76) Added a heap overrun warning.
 
 Protocol 2.02:	(Kernel 2.4.0-test3-pre3) New command line protocol.
-		Lower the conventional memory ceiling.  No overwrite
+		Lower the conventional memory ceiling.	No overwrite
 		of the traditional setup area, thus making booting
 		safe for systems which use the EBDA from SMM or 32-bit
 		BIOS entry points.  zImage deprecated but still
 		supported.
 
+Protocol 2.03:	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
+		initrd address available to the bootloader.
+
 
 **** MEMORY LAYOUT
 
@@ -45,7 +48,7 @@
 098000	+------------------------+	
 	|  Kernel setup		 |	The kernel real-mode code.
 090200	+------------------------+
-	|  Kernel boot sector    |	The kernel legacy boot sector.
+	|  Kernel boot sector	 |	The kernel legacy boot sector.
 090000	+------------------------+
 	|  Protected-mode kernel |	The bulk of the kernel image.
 010000	+------------------------+
@@ -62,16 +65,16 @@
 When using bzImage, the protected-mode kernel was relocated to
 0x100000 ("high memory"), and the kernel real-mode block (boot sector,
 setup, and stack/heap) was made relocatable to any address between
-0x10000 and end of low memory.  Unfortunately, in protocols 2.00 and
+0x10000 and end of low memory.	Unfortunately, in protocols 2.00 and
 2.01 the command line is still required to live in the 0x9XXXX memory
 range, and that memory range is still overwritten by the early kernel.
-The 2.02 protocol fixes that.
+The 2.02 protocol resolves that problem.
 
 It is desirable to keep the "memory ceiling" -- the highest point in
 low memory touched by the boot loader -- as low as possible, since
 some newer BIOSes have begun to allocate some rather large amounts of
 memory, called the Extended BIOS Data Area, near the top of low
-memory.  The boot loader should use the "INT 12h" BIOS call to verify
+memory.	 The boot loader should use the "INT 12h" BIOS call to verify
 how much low memory is available.
 
 Unfortunately, if INT 12h reports that the amount of memory is too
@@ -112,7 +115,8 @@
 0202/4	2.00+	header		Magic signature "HdrS"
 0206/2	2.00+	version		Boot protocol version supported
 0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
-020C/4	2.00+	start_sys	Points to kernel version string
+020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
+020E/2	2.00+	kernel_version	Pointer to kernel version string
 0210/1	2.00+	type_of_loader	Boot loader identifier
 0211/1	2.00+	loadflags	Boot protocol option flags
 0212/2	2.00+	setup_move_size	Move to high memory size (used with hooks)
@@ -123,6 +127,7 @@
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
 0226/2	N/A	pad1		Unused
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
+022C/4	2.03+	initrd_addr_max	Highest legal initrd address
 
 For backwards compatibility, if the setup_sects field contains 0, the
 real value is 4.
@@ -140,6 +145,15 @@
 setting fields in the header, you must make sure only to set fields
 supported by the protocol version in use.
 
+The "kernel_version" field, if set to a nonzero value, contains a
+pointer to a null-terminated human-readable kernel version number
+string, less 0x200.  This can be used to display the kernel version to
+the user.  This value should be less than (0x200*setup_sects).  For
+example, if this value is set to 0x1c00, the kernel version number
+string can be found at offset 0x1e00 in the kernel file.  This is a
+valid value if and only if the "setup_sects" field contains the value
+14 or higher.
+
 Most boot loaders will simply load the kernel at its target address
 directly.  Such boot loaders do not need to worry about filling in
 most of the fields in the header.  The following fields should be
@@ -160,6 +174,9 @@
 	3  SYSLINUX
 	4  EtherBoot
 
+	Please contact <hpa@zytor.com> if you need a bootloader ID
+	value assigned.
+
   loadflags, heap_end_ptr:
 	If the protocol version is 2.01 or higher, enter the
 	offset limit of the setup heap into heap_end_ptr and set the
@@ -180,9 +197,9 @@
 
 	The initrd should typically be located as high in memory as
 	possible, as it may otherwise get overwritten by the early
-	kernel initialization sequence.  However, it must never be
-	located above address 0x3C000000 if you want all kernels to
-	read it.
+	kernel initialization sequence.	 However, it must never be
+	located above the address specified in the initrd_addr_max
+	field.	The initrd should be at least 4K page aligned.
 
   cmd_line_ptr:
 	If the protocol version is 2.02 or higher, this is a 32-bit
@@ -192,7 +209,15 @@
 	command line, in which case you can point this to an empty
 	string (or better yet, to the string "auto".)  If this field
 	is left at zero, the kernel will assume that your boot loader
-	does not support the 2.02 protocol.
+	does not support the 2.02+ protocol.
+
+  ramdisk_max:
+	The maximum address that may be occupied by the initrd
+	contents.  For boot protocols 2.02 or earlier, this field is
+	not present, and the maximum address is 0x37FFFFFF.  (This
+	address is defined as the address of the highest safe byte, so
+	if your ramdisk is exactly 131072 bytes long and this field is
+	0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
 
 
 **** THE KERNEL COMMAND LINE
@@ -254,14 +279,14 @@
 		if ( protocol >= 0x0202 ) {
 			cmd_line_ptr = base_ptr + 0x9000;
 		} else {
-			cmd_line_magic  = 0xA33F;
+			cmd_line_magic	= 0xA33F;
 			cmd_line_offset = 0x9000;
 			setup_move_size = 0x9100;
 		}
 	} else {
 		/* Very old kernel */
 
-		cmd_line_magic  = 0xA33F;
+		cmd_line_magic	= 0xA33F;
 		cmd_line_offset = 0x9000;
 
 		/* A very old kernel MUST have its real-mode code
@@ -411,4 +436,3 @@
 
 	After completing your hook, you should jump to the address
 	that was in this field before your boot loader overwrote it.
-
diff -urN linux-2.5.3-pre4/Makefile linux/Makefile
--- linux-2.5.3-pre4/Makefile	Thu Jan 24 12:35:15 2002
+++ linux/Makefile	Thu Jan 24 12:35:29 2002
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 5
 SUBLEVEL = 3
-EXTRAVERSION =-pre4
+EXTRAVERSION =-pre5
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
diff -urN linux-2.5.3-pre4/arch/alpha/Config.help linux/arch/alpha/Config.help
--- linux-2.5.3-pre4/arch/alpha/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/alpha/Config.help	Thu Jan 24 12:35:29 2002
@@ -0,0 +1,494 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_ALPHA
+  The Alpha is a 64-bit general-purpose processor designed and
+  marketed by the Digital Equipment Corporation of blessed memory, now
+  Compaq.  Alpha Linux dates from 1995-1996 and was the first non-x86
+  port. The Alpha Linux project has a home page at
+  <http://www.alphalinux.org/>.
+
+CONFIG_MATHEMU
+  This option is required for IEEE compliant floating point arithmetic
+  on the Alpha. The only time you would ever not say Y is to say M in
+  order to debug the code. Say Y unless you know what you are doing.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_DISCONTIGMEM
+  Say Y to upport efficient handling of discontiguous physical memory,
+  for architectures which are either NUMA (Non-Uniform Memory Access)
+  or have huge holes in the physical address space for other reasons.
+  See <file:Documentation/vm/numa> for more.
+
+CONFIG_NUMA
+  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+  Access).  This option is for configuring high-end multiprocessor
+  server machines.  If in doubt, say N.
+
+CONFIG_ALPHA_AVANTI
+  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
+  Alphas. Info at
+  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
+
+CONFIG_ALPHA_EB64P
+  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
+  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
+  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
+  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
+  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
+  Runs from standard PC power supply.
+
+CONFIG_ALPHA_NONAME
+  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
+  UDB).  This design was produced by Digital's Technical OEM (TOEM)
+  group. It uses the 21066 processor running at 166MHz or 233MHz. It
+  is a baby-AT size, and runs from a standard PC power supply. It has
+  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
+  2 versions, with either PS/2 or large DIN connectors for the
+  keyboard.
+
+CONFIG_ALPHA_PRIMO
+  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
+
+CONFIG_ALPHA_GAMMA
+  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
+
+CONFIG_ALPHA_SRM
+  There are two different types of booting firmware on Alphas: SRM,
+  which is command line driven, and ARC, which uses menus and arrow
+  keys. Details about the Linux/Alpha booting process are contained in
+  the Linux/Alpha FAQ, accessible on the WWW from
+  <http://www.alphalinux.org/>.
+
+  The usual way to load Linux on an Alpha machine is to use MILO
+  (a bootloader that lets you pass command line parameters to the
+  kernel just like lilo does for the x86 architecture) which can be
+  loaded either from ARC or can be installed directly as a permanent
+  firmware replacement from floppy (which requires changing a certain
+  jumper on the motherboard). If you want to do either of these, say N
+  here. If MILO doesn't work on your system (true for Jensen
+  motherboards), you can bypass it altogether and boot Linux directly
+  from an SRM console; say Y here in order to do that. Note that you
+  won't be able to boot from an IDE disk using SRM.
+
+  If unsure, say N.
+
+CONFIG_ALPHA_LEGACY_START_ADDRESS
+  The 2.4 kernel changed the kernel start address from 0x310000
+  to 0x810000 to make room for the Wildfire's larger SRM console.
+
+  If you're using aboot 0.7 or later, the bootloader will examine the
+  ELF headers to determine where to transfer control. Unfortunately,
+  most older bootloaders -- APB or MILO -- hardcoded the kernel start
+  address rather than examining the ELF headers, and the result is a
+  hard lockup.
+
+  Say Y if you have a broken bootloader.  Say N if you do not, or if
+  you wish to run on Wildfire.
+
+CONFIG_ALPHA_LARGE_VMALLOC
+  Process creation and other aspects of virtual memory management can
+  be streamlined if we restrict the kernel to one PGD for all vmalloc
+  allocations.  This equates to about 8GB.
+
+  Under normal circumstances, this is so far and above what is needed
+  as to be laughable.  However, there are certain applications (such
+  as benchmark-grade in-kernel web serving) that can make use of as
+  much vmalloc space as is available.
+
+  Say N unless you know you need gobs and gobs of vmalloc space.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_EM86
+  Say Y here if you want to be able to execute Linux/Intel ELF
+  binaries just like native Alpha binaries on your Alpha machine. For
+  this to work, you need to have the emulator /usr/bin/em86 in place.
+
+  You can get the same functionality by saying N here and saying Y to
+  "Kernel support for MISC binaries".
+
+  You may answer M to compile the emulation support as a module and
+  later load the module when you want to use a Linux/Intel binary. The
+  module will be called binfmt_em86.o. If unsure, say Y.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_SRM_ENV
+  If you enable this option, a subdirectory called srm_environment
+  will give you access to the most important SRM environment
+  variables. If you've got an Alpha style system supporting
+  SRC, then it is a good idea to say Yes or Module to this driver.
+
+  This driver is also available as a module and will be called
+  srm_env.o if you build it as a module.
+
+CONFIG_DEBUG_KERNEL
+  Say Y here if you are developing drivers or trying to debug and
+  identify kernel problems.
+
+CONFIG_DEBUG_SLAB
+  Say Y here to have the kernel do limited verification on memory
+  allocation as well as poisoning memory on free to catch use of freed
+  memory.
+
+CONFIG_DEBUG_SPINLOCK
+  Say Y here and build SMP to catch missing spinlock initialization
+  and certain other kinds of spinlock errors commonly made.  This is
+  best used in conjunction with the NMI watchdog so that spinlock
+  deadlocks are also debuggable.
+
diff -urN linux-2.5.3-pre4/arch/alpha/config.in linux/arch/alpha/config.in
--- linux-2.5.3-pre4/arch/alpha/config.in	Thu Jan 10 16:23:44 2002
+++ linux/arch/alpha/config.in	Thu Jan 24 12:35:29 2002
@@ -8,21 +8,7 @@
 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y
 
-mainmenu_name "Kernel configuration of Linux for Alpha machines"
-
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-  bool 'Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General setup'
@@ -241,10 +227,6 @@
    define_bool CONFIG_PCMCIA n
 fi
 
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    choice 'Kernel core (/proc/kcore) format' \
 	"ELF		CONFIG_KCORE_ELF	\
diff -urN linux-2.5.3-pre4/arch/arm/Config.help linux/arch/arm/Config.help
--- linux-2.5.3-pre4/arch/arm/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/arm/Config.help	Thu Jan 24 12:35:29 2002
@@ -0,0 +1,755 @@
+CONFIG_ARM
+  The ARM series is a line of low-power-consumption RISC chip designs
+  licensed by ARM ltd and targeted at embedded applications and
+  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
+  manufactured, but  legacy ARM-based PC hardware remains popular in
+  Europe.  There is an ARM Linux project with a web page at
+  <http://www.arm.linux.org.uk/>.
+
+CONFIG_LEDS
+  If you say Y here, the LEDs on your machine will be used
+  to provide useful information about your current system status.
+
+  If you are compiling a kernel for a NetWinder or EBSA-285, you will
+  be able to select which LEDs are active using the options below. If
+  you are compiling a kernel for the EBSA-110 or the LART however, the
+  red LED will simply flash regularly to indicate that the system is
+  still functional. It is safe to say Y here if you have a CATS
+  system, but the driver will do nothing.
+
+CONFIG_LEDS_TIMER
+  If you say Y here, one of the system LEDs (the green one on the
+  NetWinder, the amber one on the EBSA285, or the red one on the LART)
+  will flash regularly to indicate that the system is still
+  operational. This is mainly useful to kernel hackers who are
+  debugging unstable kernels.
+
+  The LART uses the same LED for both Timer LED and CPU usage LED
+  functions. You may choose to use both, but the Timer LED function
+  will overrule the CPU usage LED.
+
+CONFIG_LEDS_CPU
+  If you say Y here, the red LED will be used to give a good real
+  time indication of CPU usage, by lighting whenever the idle task
+  is not currently executing.
+
+  The LART uses the same LED for both Timer LED and CPU usage LED
+  functions. You may choose to use both, but the Timer LED function
+  will overrule the CPU usage LED.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_DISCONTIGMEM
+  Say Y to upport efficient handling of discontiguous physical memory,
+  for architectures which are either NUMA (Non-Uniform Memory Access)
+  or have huge holes in the physical address space for other reasons.
+  See <file:Documentation/vm/numa> for more.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_PCI_INTEGRATOR
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_ARCH_CAMELOT
+  This enables support for Altera's Excalibur XA10 development board.
+  If you would like to build your kernel to run on one of these boards
+  then you must say 'Y' here. Otherwise say 'N'
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_ARM_THUMB
+  Say Y if you want to have kernel support for ARM Thumb instructions,
+  fault handlers, and system calls.
+
+  The Thumb instruction set is a compressed form of the standard ARM
+  instruction set resulting in smaller binaries at the expense of
+  slightly less efficient code.
+
+  If you don't know what this all is, saying Y is a safe choice.
+
+CONFIG_PM
+  "Power Management" means that parts of your computer are shut
+  off or put into a power conserving "sleep" mode if they are not
+  being used.  There are two competing standards for doing this: APM
+  and ACPI.  If you want to use either one, say Y here and then also
+  to the requisite support below.
+
+  Power Management is most important for battery powered laptop
+  computers; if you have a laptop, check out the Linux Laptop home
+  page on the WWW at
+  <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
+  Battery Powered Linux mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that, even if you say N here, Linux on the x86 architecture
+  will issue the hlt instruction if nothing is to be done, thereby
+  sending the processor to sleep and saving power.
+
+CONFIG_APM
+  APM is a BIOS specification for saving power using several different
+  techniques. This is mostly useful for battery powered laptops with
+  APM compliant BIOSes. If you say Y here, the system time will be
+  reset after a RESUME operation, the /proc/apm device will provide
+  battery status information, and user-space programs will receive
+  notification of APM "events" (e.g. battery status change).
+
+  If you select "Y" here, you can disable actual use of the APM
+  BIOS by passing the "apm=off" option to the kernel at boot time.
+
+  Note that the APM support is almost completely disabled for
+  machines with more than one CPU.
+
+  In order to use APM, you will need supporting software. For location
+  and more information, read <file:Documentation/pm.txt> and the
+  Battery Powered Linux mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver does not spin down disk drives (see the hdparm(8)
+  manpage ("man 8 hdparm") for that), and it doesn't turn off
+  VESA-compliant "green" monitors.
+
+  This driver does not support the TI 4000M TravelMate and the ACER
+  486/DX4/75 because they don't have compliant BIOSes. Many "green"
+  desktop machines also don't have compliant BIOSes, and this driver
+  may cause those machines to panic during the boot phase.
+
+  Generally, if you don't have a battery in your machine, there isn't
+  much point in using this driver and you should say N. If you get
+  random kernel OOPSes or reboots that don't seem to be related to
+  anything, try disabling/enabling this option (or disabling/enabling
+  APM in your BIOS).
+
+  Some other things you should try when experiencing seemingly random,
+  "weird" problems:
+
+   1) make sure that you have enough swap space and that it is
+      enabled.
+   2) pass the "no-hlt" option to the kernel
+   3) switch on floating point emulation in the kernel and pass
+      the "no387" option to the kernel
+   4) pass the "floppy=nodma" option to the kernel
+   5) pass the "mem=4M" option to the kernel (thereby disabling
+      all but the first 4 MB of RAM)
+   6) make sure that the CPU is not over clocked.
+   7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+   8) disable the cache from your BIOS settings
+   9) install a fan for the video card or exchange video RAM
+   10) install a better fan for the CPU
+   11) exchange RAM chips
+   12) exchange the motherboard.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  apm.o.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_ARCH_A5K
+  Say Y here to to support the Acorn A5000.  Linux can support the
+  internal IDE disk and CD-ROM interface, serial and parallel port,
+  and the floppy drive.  Note that on some A5000s the floppy is
+  plugged into the wrong socket on the motherboard.
+
+CONFIG_ARCH_ARC
+  The Acorn Archimedes was an personal computer based on an 8K ARM2
+  processor, released in 1987.  It supported 512K of RAM and 2 800K
+  floppy disks.  Picture and more detailed specifications at
+  <http://www.computingmuseum.com/museum/archi.htm>.
+
+CONFIG_PAGESIZE_16
+  Say Y here if your Archimedes or A5000 system has only 2MB of
+  memory, otherwise say N.  The resulting kernel will not run on a
+  machine with 4MB of memory.
+
+CONFIG_ARCH_CATS
+  Say Y here if you intend to run this kernel on the CATS.
+
+  Saying N will reduce the size of the Footbridge kernel.
+
+CONFIG_ARCH_EBSA285_ADDIN
+  Say Y here if you intend to run this kernel on the EBSA285 card
+  in addin mode.
+
+  Saying N will reduce the size of the Footbridge kernel.
+
+CONFIG_ARCH_EBSA285_HOST
+  Say Y here if you intend to run this kernel on the EBSA285 card
+  in host ("central function") mode.
+
+  Saying N will reduce the size of the Footbridge kernel.
+
+CONFIG_ARCH_NETWINDER
+  Say Y here if you intend to run this kernel on the Rebel.COM
+  NetWinder.  Information about this machine can be found at:
+
+  <http://www.netwinder.org/>
+
+  Saying N will reduce the size of the Footbridge kernel.
+
+CONFIG_ARCH_P720T
+  Say Y here if you intend to run this kernel on the ARM Prospector
+  720T.
+
+CONFIG_ARCH_PERSONAL_SERVER
+  Say Y here if you intend to run this kernel on the Compaq
+  Personal Server.
+
+  Saying N will reduce the size of the Footbridge kernel.
+
+  The Compaq Personal Server is not available for purchase.
+  There are no product plans beyond the current research
+  prototypes at this time.  Information is available at:
+
+  <http://crl.research.compaq.com/projects/personalserver/>
+
+  If you have any questions or comments about the  Compaq Personal
+  Server, send e-mail to skiff@crl.dec.com.
+
+CONFIG_SA1100_ASSABET
+  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
+  Microprocessor Development Board (also known as the Assabet).
+
+CONFIG_ASSABET_NEPONSET
+  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
+  Microprocessor Development Board (Assabet)  with the SA-1111
+  Development Board (Nepon).
+
+CONFIG_SA1100_H3600
+  Say Y here if you intend to run this kernel on the Compaq iPAQ
+  H3600 handheld computer.  Information about this machine and the
+  Linux port to this machine can be found at:
+
+  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+CONFIG_SA1100_BRUTUS
+  Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
+  Microprocessor Development Board (also known as the Brutus).
+
+CONFIG_SA1100_LART
+  Say Y here if you are using the Linux Advanced Radio Terminal
+  (also known as the LART).  See <http://www.lart.tudelft.nl/> for
+  information on the LART.
+
+CONFIG_SA1100_GRAPHICSCLIENT
+  Say Y here if you are using an Applied Data Systems Intel(R)
+  StrongARM(R) SA-1100 based Graphics Client SBC.  See
+  <http://www.flatpanels.com/> for information on this system.
+
+CONFIG_SA1100_CERF
+  The Intrinsyc CerfBoard is based on the StrongARM 1110.
+  More information is available at:
+  <http://www.intrinsyc.com/products/referenceplatforms/cerfboard.html>.
+
+  Say Y if configuring for an Intrinsyc CerfBoard.
+  Say N otherwise.
+
+CONFIG_SA1100_FLEXANET
+  Say Y here if you intend to run this kernel on the FlexaNet
+  handheld instruments. Information about this machine can be
+  found at: <http://www.flexanet.com/>.
+
+CONFIG_SA1100_NANOENGINE
+  The nanoEngine is a StrongARM 1110-based single board computer
+  from Bright Star Engineering. More information is available at:
+  <http://www.brightstareng.com/arm/nanoeng.htm>.
+
+  Say Y if configuring for a nanoEngine.
+  Say N otherwise.
+
+CONFIG_SA1100_PANGOLIN
+  Pangolin is a StrongARM 1110-based evaluation platform produced
+  by Dialogue Technology.  It has EISA slots for ease of configuration
+  with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
+  card, and TFT-LCD card.
+
+  Say Y if configuring for a Pangolin.
+  Say N otherwise.
+
+CONFIG_SA1100_VICTOR
+  Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
+  SA-1100 based Victor Digital Talking Book Reader.  See
+  <http://www.visuaide.com/pagevictor.en.html> for information on
+  this system.
+
+CONFIG_CPU_ARM610
+  The ARM610 is the successor to the ARM3 processor
+  and was produced by VLSI Technology Inc.
+
+  Say Y if you want support for the ARM610 processor.
+  Otherwise, say N.
+
+CONFIG_CPU_ARM710
+  A 32-bit RISC microprocessor based on the ARM7 processor core
+  designed by Advanced RISC Machines Ltd. The ARM710 is the
+  successor to the ARM610 processor. It was released in
+  July 1994 by VLSI Technology Inc.
+
+  Say Y if you want support for the ARM710 processor.
+  Otherwise, say N.
+
+CONFIG_CPU_ARM720T
+  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
+  MMU built around an ARM7TDMI core.
+
+  Say Y if you want support for the ARM720T processor.
+  Otherwise, say N.
+
+CONFIG_CPU_ARM920T
+  The ARM920T is licensed to be produced by numerous vendors,
+  and is used in the Maverick EP9312.  More information at
+  <http://linuxdevices.com/products/PD2382866068.html>.
+
+  Say Y if you want support for the ARM920T processor.
+  Otherwise, say N.
+
+CONFIG_CPU_ARM1020
+  The ARM1020 is the cached version of the ARM10 processor,
+  with an addition of a floating-point unit.
+
+  Say Y if you want support for the ARM1020 processor.
+  Otherwise, say N.
+
+CONFIG_CPU_SA110
+  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
+  is available at five speeds ranging from 100 MHz to 233 MHz.
+  More information is available at
+  <http://developer.intel.com/design/strong/sa110.htm>.
+
+  Say Y if you want support for the SA-110 processor.
+  Otherwise, say N.
+
+CONFIG_FPE_NWFPE
+  Say Y to include the NWFPE floating point emulator in the kernel.
+  This is necessary to run most binaries. Linux does not currently
+  support floating point hardware so you need to say Y here even if
+  your machine has an FPA or floating point co-processor podule.
+
+  It is also possible to say M to build the emulator as a module
+  (nwfpe.o) or indeed to leave it out altogether. However, unless you
+  know what you are doing this can easily render your machine
+  unbootable. Saying Y is the safe option.
+
+  You may say N here if you are going to load the Acorn FPEmulator
+  early in the bootup.
+
+CONFIG_FPE_FASTFPE
+  Say Y here to include the FAST floating point emulator in the kernel.
+  This is an experimental much faster emulator which has only 32 bit
+  precision for the mantissa.  It does not support any exceptions.
+  This makes it very simple, it is approximately 4-8 times faster than
+  NWFPE.
+
+  It should be sufficient for most programs.  It is definitely not
+  suitable if you do scientific calculations that need double
+  precision for iteration formulas that sum up lots of very small
+  numbers.  If you do not feel you need a faster FP emulation you
+  should better choose NWFPE.
+
+  It is also possible to say M to build the emulator as a module
+  (fastfpe.o).  But keep in mind that you should only load the FP
+  emulator early in the bootup.  You should never change from NWFPE to
+  FASTFPE or vice versa in an active system!
+
+CONFIG_DEBUG_ERRORS
+  This option controls verbose debugging information which can be
+  printed when the kernel detects an internal error. This debugging
+  information is useful to kernel hackers when tracking down problems,
+  but mostly meaningless to other people. It's safe to say Y unless
+  you are concerned with the code size or don't want to see these
+  messages.
+
+CONFIG_NO_FRAME_POINTER
+  If you say Y here, the resulting kernel will be slightly smaller and
+  faster. However, when a problem occurs with the kernel, the
+  information that is reported is severely limited. Most people
+  should say N here.
+
+CONFIG_DEBUG_USER
+  When a user program crashes due to an exception, the kernel can
+  print a brief message explaining what the problem was. This is
+  sometimes helpful for debugging but serves no purpose on a
+  production system. Most people should say N here.
+
+CONFIG_DEBUG_INFO
+  Say Y here to include source-level debugging information in the
+  `vmlinux' binary image. This is handy if you want to use gdb or
+  addr2line to debug the kernel. It has no impact on the in-memory
+  footprint of the running kernel but it can increase the amount of
+  time and disk space needed for compilation of the kernel. If in
+  doubt say N.
+
+CONFIG_DEBUG_LL
+  Say Y here to include definitions of printascii, printchar, printhex
+  in the kernel.  This is helpful if you are debugging code that
+  executes before the console is initialized.
+
+CONFIG_DEBUG_DC21285_PORT
+  Say Y here if you want the debug print routines to direct their
+  output to the serial port in the DC21285 (Footbridge). Saying N
+  will cause the debug messages to appear on the first 16550
+  serial port.
+
+CONFIG_DEBUG_CLPS711X_UART2
+  Say Y here if you want the debug print routines to direct their
+  output to the second serial port on these devices.  Saying N will
+  cause the debug messages to appear on the first serial port.
+
+CONFIG_NO_PGT_CACHE
+  Normally the kernel maintains a `quicklist' of preallocated
+  pagetable structures in order to increase performance. On machines
+  with very few pages this may however be a loss. Say Y here to
+  disable the pgtable cache.
+
+CONFIG_ARTHUR
+  Say Y here to include the kernel code necessary if you want to run
+  Acorn RISC OS/Arthur binaries under Linux. This code is still very
+  experimental; if this sounds frightening, say N and sleep in peace.
+  You can also say M here to compile this support as a module (which
+  will be called arthur.o).
+
+CONFIG_CMDLINE
+  On some architectures (EBSA110 and CATS), there is currently no way
+  for the boot loader to pass arguments to the kernel. For these
+  architectures, you should supply some command-line options at build
+  time by entering them here. As a minimum, you should specify the
+  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+CONFIG_ALIGNMENT_TRAP
+  ARM processors can not fetch/store information which is not
+  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+  address divisible by 4. On 32-bit ARM processors, these non-aligned
+  fetch/store instructions will be emulated in software if you say
+  here, which has a severe performance impact. This is necessary for
+  correct operation of some network protocols. With an IP-only
+  configuration it is safe to say N, otherwise say Y.
+
+CONFIG_DEBUG_KERNEL
+  Say Y here if you are developing drivers or trying to debug and
+  identify kernel problems.
+
+CONFIG_DEBUG_SLAB
+  Say Y here to have the kernel do limited verification on memory
+  allocation as well as poisoning memory on free to catch use of freed
+  memory.
+
+CONFIG_DEBUG_SPINLOCK
+  Say Y here and build SMP to catch missing spinlock initialization
+  and certain other kinds of spinlock errors commonly made.  This is
+  best used in conjunction with the NMI watchdog so that spinlock
+  deadlocks are also debuggable.
+
+CONFIG_DEBUG_BUGVERBOSE
+  Say Y here to make BUG() panics output the file name and line number
+  of the BUG call as well as the EIP and oops trace.  This aids
+  debugging but costs about 70-100K of memory.
+
diff -urN linux-2.5.3-pre4/arch/arm/config.in linux/arch/arm/config.in
--- linux-2.5.3-pre4/arch/arm/config.in	Thu Jan 10 16:23:44 2002
+++ linux/arch/arm/config.in	Thu Jan 24 12:35:29 2002
@@ -14,20 +14,7 @@
 define_bool CONFIG_GENERIC_BUST_SPINLOCK n
 define_bool CONFIG_GENERIC_ISA_DMA n
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE
-endmenu
-
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-dep_bool '  Set version information on all module symbols' CONFIG_MODVERSIONS $CONFIG_MODULES
-dep_bool '  Kernel module loader' CONFIG_KMOD $CONFIG_MODULES
-endmenu
-
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'System Type'
@@ -467,10 +454,6 @@
 else
    define_bool CONFIG_PCMCIA n
 fi
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 comment 'At least one math emulation must be selected'
 tristate 'NWFPE math emulation' CONFIG_FPE_NWFPE
 dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
diff -urN linux-2.5.3-pre4/arch/cris/Config.help linux/arch/cris/Config.help
--- linux-2.5.3-pre4/arch/cris/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/cris/Config.help	Thu Jan 24 12:35:29 2002
@@ -0,0 +1,384 @@
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_SVINTO_SIM
+  Support the xsim ETRAX Simulator.
+
+CONFIG_ETRAX_DRAM_SIZE
+  Size of DRAM (decimal in MB) typically 2, 8 or 16.
+
+CONFIG_ETRAX_FLASH_BUSWIDTH
+  Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
+
+CONFIG_ETRAX_LED1G
+  Bit to use for the first green LED.
+  Most Axis products use bit 2 here.
+
+CONFIG_ETRAX_LED1R
+  Bit to use for the first red LED.
+  Most Axis products use bit 3 here.
+  For products with only one controllable LED,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED2G
+  Bit to use for the second green LED. The "Active" LED.
+  Most Axis products use bit 4 here.
+  For products with only one controllable LED,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED2R
+  Bit to use for the second red LED.
+  Most Axis products use bit 5 here.
+  For products with only one controllable LED,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED3G
+  Bit to use for the third green LED. The "Drive" LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED3R
+  Bit to use for the third red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED4G
+  Bit to use for the fourth green LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED4R
+  Bit to use for the fourth red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED5G
+  Bit to use for the fifth green LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED5R
+  Bit to use for the fifth red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED6G
+  Bit to use for the sixth green LED. The "Drive" LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED6R
+  Bit to use for the sixth red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED7G
+  Bit to use for the seventh green LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED7R
+  Bit to use for the seventh red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED8Y
+  Bit to use for the eighth yellow LED. The "Drive" LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED9Y
+  Bit to use for the ninth yellow LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED10Y
+  Bit to use for the tenth yellow LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED11Y
+  Bit to use for the eleventh yellow LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_LED12R
+  Bit to use for the twelfth red LED.
+  For products with only one or two controllable LEDs,
+  set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+CONFIG_ETRAX_KGDB
+  The CRIS version of gdb can be used to remotely debug a running
+  Linux kernel via the serial debug port.  Provided you have gdb-cris
+  installed, run gdb-cris vmlinux, then type
+
+  (gdb) set remotebaud 115200           <- kgdb uses 115200 as default
+  (gdb) target remote /dev/ttyS0        <- maybe you use another port
+
+  This should connect you to your booted kernel (or boot it now if you
+  didn't before).  The kernel halts when it boots, waiting for gdb if
+  this option is turned on!
+
+CONFIG_ETRAX_DEF_R_WAITSTATES
+  Waitstates for SRAM, Flash and peripherials (not DRAM).  95f8 is a
+  good choice for most Axis products...
+
+CONFIG_ETRAX_DEF_R_BUS_CONFIG
+  Assorted bits controlling write mode, DMA burst length etc.  104 is
+  a good choice for most Axis products...
+
+CONFIG_ETRAX_SDRAM
+  Enable this if you use SDRAM chips and configure
+  R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
+
+CONFIG_ETRAX_DEF_R_DRAM_CONFIG
+  The R_DRAM_CONFIG register specifies everything on how the DRAM
+  chips in the system are connected to the Etrax CPU.  This is
+  different depending on the manufacturer, chip type and number of
+  chips.  So this value often needs to be different for each Axis
+  product.
+
+CONFIG_ETRAX_DEF_R_DRAM_TIMING
+  Different DRAM chips have different speeds.  Current Axis products
+  use 50ns DRAM chips which can use the timing: 5611.
+
+CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
+  The R_SDRAM_CONFIG register specifies everything on how the SDRAM
+  chips in the system are connected to the Etrax CPU.  This is
+  different depending on the manufacturer, chip type and number of
+  chips.  So this value often needs to be different for each Axis
+  product.
+
+CONFIG_ETRAX_DEF_R_SDRAM_TIMING
+  Different SDRAM chips have different timing.
+
+CONFIG_ETRAX_DEF_R_PORT_PA_DIR
+  Configures the direction of general port A bits.  1 is out, 0 is in.
+  This is often totally different depending on the product used.
+  There are some guidelines though - if you know that only LED's are
+  connected to port PA, then they are usually connected to bits 2-4
+  and you can therefore use 1c.  On other boards which don't have the
+  LED's at the general ports, these bits are used for all kinds of
+  stuff.  If you don't know what to use, it is always safe to put all
+  as inputs, although floating inputs isn't good.
+
+CONFIG_ETRAX_DEF_R_PORT_PA_DATA
+  Configures the initial data for the general port A bits.  Most
+  products should use 00 here.
+
+CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG
+  Configures the type of the general port B bits.  1 is chip select,
+  0 is port.  Most products should use 00 here.
+
+CONFIG_ETRAX_DEF_R_PORT_PB_DIR
+  Configures the direction of general port B bits. 1 is out, 0 is in.
+  This is often totally different depending on the product used.  Bits
+  0 and 1 on port PB are usually used for I2C communication, but the
+  kernel I2C driver sets the appropriate directions itself so you
+  don't need to take that into consideration when setting this option.
+  If you don't know what to use, it is always safe to put all as
+  inputs.
+
+CONFIG_ETRAX_DEF_R_PORT_PB_DATA
+  Configures the initial data for the general port A bits.  Most
+  products should use FF here.
+
+CONFIG_ETRAX_WATCHDOG
+  Enable the built-in watchdog timer support on Etrax100 embedded
+  network computers.
+
diff -urN linux-2.5.3-pre4/arch/cris/config.in linux/arch/cris/config.in
--- linux-2.5.3-pre4/arch/cris/config.in	Thu Jan 24 12:35:15 2002
+++ linux/arch/cris/config.in	Thu Jan 24 12:35:29 2002
@@ -8,27 +8,10 @@
 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General setup'
-
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 
diff -urN linux-2.5.3-pre4/arch/cris/drivers/Config.help linux/arch/cris/drivers/Config.help
--- linux-2.5.3-pre4/arch/cris/drivers/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/cris/drivers/Config.help	Thu Jan 24 12:35:29 2002
@@ -0,0 +1,574 @@
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_BLK_DEV_IDE
+  If you say Y here, you will use the full-featured IDE driver to
+  control up to ten ATA/IDE interfaces, each being able to serve a
+  "master" and a "slave" device, for a total of up to twenty ATA/IDE
+  disk/cdrom/tape/floppy drives.
+
+  Useful information about large (>540 MB) IDE disks, multiple
+  interfaces, what to do if ATA/IDE devices are not automatically
+  detected, sound card ATA/IDE ports, module support, and other
+  topics, is contained in <file:Documentation/ide.txt>. For detailed
+  information about hard drives, consult the Disk-HOWTO and the
+  Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  To fine-tune ATA/IDE drive/interface parameters for improved
+  performance, look for the hdparm package at
+  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/ide.txt>. The module will be called ide-mod.o.
+  Do not compile this driver as a module if your root file system (the
+  one containing the directory /) is located on an IDE device.
+
+  If you have one or more IDE drives, say Y or M here. If your system
+  has no IDE drives, or if memory requirements are really tight, you
+  could say N here, and select the "Old hard disk driver" below
+  instead to save about 13 KB of memory in the kernel.
+
+CONFIG_BLK_DEV_IDEDISK
+  This will include enhanced support for MFM/RLL/IDE hard disks.  If
+  you have a MFM/RLL/IDE disk, and there is no special reason to use
+  the old hard disk driver instead, say Y.  If you have an SCSI-only
+  system, you can say N here.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-disk.o.  Do not compile this driver as a module
+  if your root file system (the one containing the directory /) is
+  located on the IDE disk. If unsure, say Y.
+
+CONFIG_BLK_DEV_IDECD
+  If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
+  a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
+  SCSI protocol. Most new CD-ROM drives use ATAPI, including the
+  NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
+  double(2X) or better speed drives.
+
+  If you say Y here, the CD-ROM drive will be identified at boot time
+  along with other IDE devices, as "hdb" or "hdc", or something
+  similar (check the boot messages with dmesg). If this is your only
+  CD-ROM drive, you can say N to all other CD-ROM options, but be sure
+  to say Y or M to "ISO 9660 CD-ROM file system support".
+
+  Note that older versions of LILO (LInux LOader) cannot properly deal
+  with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
+  <ftp://brun.dyndns.org/pub/linux/lilo/>.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-cd.o.
+
+CONFIG_PARPORT
+  If you want to use devices connected to your machine's parallel port
+  (the connector at the computer with 25 holes), e.g. printer, ZIP
+  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+  create a mini network by connecting the parallel ports of two local
+  machines) etc., then you need to say Y here; please read
+  <file:Documentation/parport.txt> and
+  <file:drivers/parport/BUGS-parport>.
+
+  For extensive information about drivers for many devices attaching
+  to the parallel port see <http://www.torque.net/linux-pp.html> on
+  the WWW.
+
+  It is possible to share a single parallel port among several devices
+  and it is safe to compile all the corresponding drivers into the
+  kernel.  If you want to compile parallel port support as a module
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport.o.  If you have more than one parallel port and want to
+  specify which port and IRQ to be used by this driver at module load
+  time, take a look at <file:Documentation/parport.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_1284
+  If you have a printer that supports status readback or device ID, or
+  want to use a device that uses enhanced parallel port transfer modes
+  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+  transfer modes. Also say Y if you want device ID information to
+  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+CONFIG_NET_ETHERNET
+  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+  type of Local Area Network (LAN) in universities and companies.
+
+  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+  coaxial cable, linking computers in a chain), 10BASE-T or twisted
+  pair (10 Mbps over twisted pair cable, linking computers to central
+  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+  Ethernet (1 Gbps over optical fiber or short copper links).
+
+  If your Linux machine will be connected to an Ethernet and you have
+  an Ethernet network interface card (NIC) installed in your computer,
+  say Y here and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You will then also have
+  to say Y to the driver for your particular NIC.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about Ethernet network cards. If unsure, say N.
+
+CONFIG_MTD
+  Memory Technology Devices are flash, RAM and similar chips, often
+  used for solid state file systems on embedded devices. This option
+  will provide the generic support for MTD drivers to register
+  themselves with the kernel and for potential users of MTD devices
+  to enumerate the devices which are present and obtain a handle on
+  them. It will also allow you to select individual drivers for 
+  particular hardware and users of MTD devices. If unsure, say N.
+
+CONFIG_MTD_PARTITIONS
+  If you have a device which needs to divide its flash chip(s) up
+  into multiple 'partitions', each of which appears to the user as
+  a separate MTD device, you require this option to be enabled. If
+  unsure, say 'Y'.
+
+  Note, however, that you don't need this option for the DiskOnChip
+  devices. Partitioning on NFTL 'devices' is a different - that's the
+  'normal' form of partitioning used on a block device.
+
+CONFIG_MTD_CHAR
+  This provides a character device for each MTD device present in
+  the system, allowing the user to read and write directly to the
+  memory chips, and also use ioctl() to obtain information about
+  the device, or to erase parts of it.
+
+CONFIG_MTD_BLOCK
+  Although most flash chips have an erase size too large to be useful
+  as block devices, it is possible to use MTD devices which are based
+  on RAM chips in this manner. This block device is a user of MTD
+  devices performing that function.
+
+  At the moment, it is also required for the Journalling Flash File
+  System(s) to obtain a handle on the MTD device when it's mounted
+  (although JFFS and JFFS2 don't actually use any of the functionality
+  of the mtdblock device).
+
+  Later, it may be extended to perform read/erase/modify/write cycles
+  on flash chips to emulate a smaller block size. Needless to say,
+  this is very unsafe, but could be useful for file systems which are
+  almost never written to.
+
+  You do not need this option for use with the DiskOnChip devices. For
+  those, enable NFTL support (CONFIG_NFTL) instead.
+
+CONFIG_MTD_CFI
+  The Common Flash Interface specification was developed by Intel,
+  AMD and other flash manufactures that provides a universal method
+  for probing the capabilities of flash devices. If you wish to
+  support any device that is CFI-compliant, you need to enable this
+  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+  for more information on CFI.
+
+CONFIG_MTD_CFI_INTELEXT
+  The Common Flash Interface defines a number of different command
+  sets which a CFI-compliant chip may claim to implement. This code
+  provides support for one of those command sets, used on Intel
+  StrataFlash and other parts.
+
+CONFIG_MTD_CFI_AMDSTD
+  The Common Flash Interface defines a number of different command
+  sets which a CFI-compliant chip may claim to implement. This code
+  provides support for one of those command sets, used on chips 
+  chips including the AMD Am29LV320.
+
+CONFIG_MTD_AMDSTD
+  This option enables support for flash chips using AMD-compatible
+  commands, including some which are not CFI-compatible and hence 
+  cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
+
+  It also works on AMD compatible chips that do conform to CFI.
+
+CONFIG_USB
+  Universal Serial Bus (USB) is a specification for a serial bus
+  subsystem which offers higher speeds and more features than the
+  traditional PC serial port.  The bus supplies power to peripherals
+  and allows for hot swapping.  Up to 127 USB peripherals can be
+  connected to a single USB port in a tree structure.  The USB port is
+  the root of the tree, the peripherals are the leaves and the inner
+  nodes are special USB devices called hubs.  Many newer PC's have USB
+  ports and newer peripherals such as scanners, keyboards, mice,
+  modems, and printers support the USB protocol and can be connected
+  to the PC via those ports.
+
+  Say Y here if your computer has a USB port and you want to use USB
+  devices.  You then need to say Y to at least one of "UHCI support"
+  or "OHCI support" below (the type of interface that the USB hardware
+  in your computer provides to the operating system) and then choose
+  from among the drivers for USB peripherals.  You may want to check
+  out the information provided in <file:Documentation/usb/> and
+  especially the links given in <file:Documentation/usb/usb-help.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbcore.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_ETRAX_PA_BUTTON_BITMASK
+  This is a bitmask with information about what bits on PA that
+  are used for buttons.
+  Most products has a so called TEST button on PA1, if that's true
+  use 02 here.
+  Use 00 if there are no buttons on PA.
+  If the bitmask is <> 00 a button driver will be included in the gpio
+  driver. Etrax general I/O support must be enabled.
+
+CONFIG_ETRAX_PA_CHANGEABLE_DIR
+  This is a bitmask with information of what bits in PA that a user
+  can change direction on using ioctl's.
+  Bit set = changeable.
+  You probably want 00 here.
+
+CONFIG_ETRAX_PA_CHANGEABLE_BITS
+  This is a bitmask with information of what bits in PA that a user
+  can change change the value on using ioctl's.
+  Bit set = changeable.
+  You probably want 00 here.
+
+CONFIG_ETRAX_PB_CHANGEABLE_DIR
+  This is a bitmask with information of what bits in PB that a user
+  can change direction on using ioctl's.
+  Bit set = changeable.
+  You probably want 00 here.
+
+CONFIG_ETRAX_PB_CHANGEABLE_BITS
+  This is a bitmask with information of what bits in PB that a user
+  can change the value on using ioctl's.
+  Bit set = changeable.
+  You probably want 00 here.
+
+CONFIG_ETRAX_GPIO
+  Enables the Etrax general port device (major 120, minors 0 and 1).
+  You can use this driver to access the general port bits. It supports
+  these ioctl's:
+        #include <linux/etraxgpio.h>
+       fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
+       ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
+       ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
+       val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL);
+  Remember that you need to setup the port directions appropriately in
+  the General configuration.
+
+CONFIG_ETRAX_SERIAL
+  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+  You probably want this enabled.
+
+CONFIG_ETRAX_SERIAL_FAST_TIMER
+  Select this to have the serial DMAs flushed at a higher rate than
+  normally, possible by using the fast timer API, the timeout is
+  approx. 4 character times.
+  If unsure, say N.
+
+CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
+  Select this to have the serial DMAs flushed at a higher rate than
+  normally possible through a fast timer interrupt (currently at
+  15360 Hz).
+  If unsure, say N.
+
+CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
+  Number of timer ticks between flush of receive fifo (1 tick = 10ms).
+  Try 0-3 for low latency applications.  Approx 5 for high load
+  applications (e.g. PPP).  Maybe this should be more adaptive some
+  day...
+
+CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB
+  Enables the status and control signals DTR, RI, DSR and CD on PB for
+  ser0.
+
+CONFIG_ETRAX_SERIAL_PORT1
+  Enables the ETRAX 100 serial driver for ser1 (ttyS1).
+
+CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
+  Enables the status and control signals DTR, RI, DSR and CD on PB for
+  ser1.
+
+CONFIG_ETRAX_SERIAL_PORT2
+  Enables the ETRAX 100 serial driver for ser2 (ttyS2).
+
+CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA
+  Enables the status and control signals DTR, RI, DSR and CD on PA for
+  ser2.
+
+CONFIG_ETRAX_SERIAL_PORT3
+  Enables the ETRAX 100 serial driver for ser3 (ttyS3).
+
+CONFIG_ETRAX_RS485
+  Enables support for RS-485 serial communication.  For a primer on
+  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+
+CONFIG_ETRAX_RS485_ON_PA
+  Control Driver Output Enable on RS485 tranceiver using a pin on PA
+  port:
+          Axis 2400/2401 uses PA 3.
+
+CONFIG_ETRAX_RS485_ON_PA_BIT
+  Control Driver Output Enable on RS485 tranceiver using a this bit
+  on PA port.
+
+CONFIG_ETRAX_SER0_DTR_ON_PB_BIT
+  Specify the pin of the PB port to carry the DTR signal for serial
+  port 0.
+
+CONFIG_ETRAX_SER0_RI_ON_PB_BIT
+  Specify the pin of the PB port to carry the RI signal for serial
+  port 0.
+
+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT
+  Specify the pin of the PB port to carry the DSR signal for serial
+  port 0.
+
+CONFIG_ETRAX_SER0_CD_ON_PB_BIT
+  Specify the pin of the PB port to carry the CD signal for serial
+  port 0.
+
+CONFIG_ETRAX_SER1_DTR_ON_PB_BIT
+  Specify the pin of the PB port to carry the DTR signal for serial
+  port 1.
+
+CONFIG_ETRAX_SER1_RI_ON_PB_BIT
+  Specify the pin of the PB port to carry the RI signal for serial
+  port 1.
+
+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT
+  Specify the pin of the PB port to carry the DSR signal for serial
+  port 1.
+
+CONFIG_ETRAX_SER1_CD_ON_PB_BIT
+  Specify the pin of the PB port to carry the CD signal for serial
+  port 1.
+
+CONFIG_ETRAX_SER2_DTR_ON_PA_BIT
+  Specify the pin of the PA port to carry the DTR signal for serial
+  port 2.
+
+CONFIG_ETRAX_SER2_RI_ON_PA_BIT
+  Specify the pin of the PA port to carry the RI signal for serial
+  port 2.
+
+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT
+  Specify the pin of the PA port to carry the DTR signal for serial
+  port 2.
+
+CONFIG_ETRAX_SER2_CD_ON_PA_BIT
+  Specify the pin of the PA port to carry the CD signal for serial
+  port 2.
+
+CONFIG_ETRAX_RS485_DISABLE_RECEIVER
+  It's necessary to disable the serial receiver to avoid serial
+  loopback.  Not all products are able to do this in software only.
+  Axis 2400/2401 must disable receiver.
+
+CONFIG_ETRAX_I2C
+  Enables an I2C driver on PB0 and PB1 on ETRAX100.
+  EXAMPLE usage:
+        i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+       ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+       i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+       val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+  Select whether to use the special I2C mode in the PB I/O register or
+  not.  This option needs to be selected in order to use some drivers
+  that access the I2C I/O pins directly instead of going through the
+  I2C driver, like the DS1302 realtime-clock driver.  If you are
+  uncertain, choose Y here.
+
+CONFIG_ETRAX_I2C_EEPROM
+  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
+  driver.  Select size option: Probed, 2k, 8k, 16k.
+  (Probing works for 2k and 8k but not that well for 16k)
+
+CONFIG_ETRAX_I2C_EEPROM_16KB
+  Use a 16kB EEPROM.
+
+CONFIG_ETRAX_I2C_EEPROM_2KB
+  Use a 2kB EEPROM.
+
+CONFIG_ETRAX_I2C_EEPROM_8KB
+  Use a 8kB EEPROM.
+
+CONFIG_ETRAX_I2C_EEPROM_PROBE
+  Specifies size or auto probe of the EEPROM size.
+  Options: Probed, 2k, 8k, 16k.
+  (Probing works for 2k and 8k but not that well for 16k)
+
+CONFIG_ETRAX_DS1302
+  Enables the driver for the DS1302 Real-Time Clock battery-backed
+  chip on some products.  The kernel reads the time when booting, and
+  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
+  rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
+  device, major 121.  You can check the time with cat /proc/rtc, but
+  normal time reading should be done using libc function time and
+  friends.
+
+CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
+  If your product has the RST signal line for the DS1302 RTC on the
+  Generic Port then say Y here, otherwise leave it as N in which
+  case the RST signal line is assumed to be connected to Port PB
+  (just like the SCL and SDA lines).
+
+CONFIG_ETRAX_DS1302_RSTBIT
+  This is the bit number for the RST signal line of the DS1302 RTC on
+  the selected port. If you have selected the generic port then it
+  should be bit 27, otherwise your best bet is bit 5.
+
+CONFIG_ETRAX_DS1302_SCLBIT
+  This is the bit number for the SCL signal line of the DS1302 RTC on
+  Port PB. This is probably best left at 3.
+
+CONFIG_ETRAX_DS1302_SDABIT
+  This is the bit number for the SDA signal line of the DS1302 RTC on
+  Port PB. This is probably best left at 2.
+
+CONFIG_ETRAX_IDE_CSP0_8_RESET
+  Configures the pin used to reset the IDE bus.
+
+CONFIG_ETRAX_IDE_DELAY
+  Sets the time to wait for disks to regain consciousness after reset.
+
+CONFIG_ETRAX_IDE_G27_RESET
+  Configures the pin used to reset the IDE bus.
+
+CONFIG_ETRAX_IDE_PB7_RESET
+  Configures the pin used to reset the IDE bus.
+
+CONFIG_ETRAX_USB_HOST
+  This option enables the host functionality of the ETRAX 100LX
+  built-in USB controller. In host mode the controller is designed
+  for CTRL and BULK traffic only, INTR traffic may work as well
+  however (depending on the requirements of timeliness).
+
+CONFIG_ETRAX_USB_HOST_PORT1
+  This option enables port 1 of the ETRAX 100LX USB root hub (RH).
+
+CONFIG_ETRAX_USB_HOST_PORT2
+  This option enables port 2 of the ETRAX 100LX USB root hub (RH).
+
+CONFIG_ETRAX_ETHERNET
+  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
+  controller.
+
+CONFIG_ETRAX_SYNCHRONOUS_SERIAL
+  This option enables support for the ETRAX 100LX built-in
+  synchronous serial ports. These ports are used for continuous
+  streamed data like audio. The default setting is compatible
+  with the STA 013 MP3 decoder, but can easily be tuned to fit
+  any other audio encoder/decoder and SPI.
+
+CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0
+  Enables the ETRAX 100LX synchronous serial port 0 (syncser0).
+
+CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA
+  Makes synchronous serial port 0 use DMA.
+
+CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1
+  Enables the ETRAX 100LX synchronous serial port 1 (syncser1).
+
+CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA
+  Makes synchronous serial port 1 use DMA.
+
+CONFIG_JULIETTE
+  The ARTPEC-1 is a video-compression chip used in the AXIS 2100
+  network camera, which is built around an ETRAX-100 board.  With this
+  option selected, the ETRAX kernel configures a DMA channel at boot
+  time to talk to the chip.
+
+CONFIG_ETRAX_AXISFLASHMAP
+  This option enables MTD mapping of flash devices.  Needed to use
+  flash memories.  If unsure, say Y.
+
+CONFIG_ETRAX_PTABLE_SECTOR
+  Byte-offset of the partition table in the first flash chip.
+  The default value is 64kB and should not be changed unless
+  you know exactly what you are doing. The only valid reason
+  for changing this is when the flash block size is bigger
+  than 64kB (e.g. when using two parallel 16 bit flashes).
+
+CONFIG_ETRAX_PARPORT
+  Say Y here to enable the ETRAX on-board parallel ports.
+
+CONFIG_ETRAX_PARALLEL_PORT0
+  Say Y here to enable parallel port 0.
+
+CONFIG_ETRAX_PARALLEL_PORT1
+  Say Y here to enable parallel port 1.
+
diff -urN linux-2.5.3-pre4/arch/i386/Config.help linux/arch/i386/Config.help
--- linux-2.5.3-pre4/arch/i386/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/i386/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,806 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_X86
+  This is Linux's home port.  Linux was originally native to the Intel
+  386, and runs on all the later x86 processors including the Intel
+  486, 586, Pentiums, and various instruction-set-compatible chips by
+  AMD, Cyrix, and others.
+
+CONFIG_MULTIQUAD
+  This option is used for getting Linux to run on a (IBM/Sequent) NUMA 
+  multiquad box. This changes the way that processors are bootstrapped,
+  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
+  You will need a new lynxer.elf file to flash your firmware with - send
+  email to Martin.Bligh@us.ibm.com
+
+CONFIG_X86_UP_IOAPIC
+  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
+  SMP-capable replacement for PC-style interrupt controllers. Most
+  SMP systems and a small number of uniprocessor systems have one.
+  If you have a single-CPU system with an IO-APIC, you can say Y here
+  to use it. If you say Y here even though your machine doesn't have
+  an IO-APIC, then the kernel will still run with no slowdown at all.
+
+  If you have a system with several CPUs, you do not need to say Y
+  here: the IO-APIC will be used automatically.
+
+CONFIG_X86_UP_APIC
+  A local APIC (Advanced Programmable Interrupt Controller) is an
+  integrated interrupt controller in the CPU. If you have a single-CPU
+  system which has a processor with a local APIC, you can say Y here to
+  enable and use it. If you say Y here even though your machine doesn't
+  have a local APIC, then the kernel will still run with no slowdown at
+  all. The local APIC supports CPU-generated self-interrupts (timer,
+  performance counters), and the NMI watchdog which detects hard lockups.
+
+  If you have a system with several CPUs, you do not need to say Y
+  here: the local APIC will be used automatically.
+
+CONFIG_MATH_EMULATION
+  Linux can emulate a math coprocessor (used for floating point
+  operations) if you don't have one. 486DX and Pentium processors have
+  a math coprocessor built in, 486SX and 386 do not, unless you added
+  a 487DX or 387, respectively. (The messages during boot time can
+  give you some hints here ["man dmesg"].) Everyone needs either a
+  coprocessor or this emulation.
+
+  If you don't have a math coprocessor, you need to say Y here; if you
+  say Y here even though you have a coprocessor, the coprocessor will
+  be used nevertheless. (This behavior can be changed with the kernel
+  command line option "no387", which comes handy if your coprocessor
+  is broken. Try "man bootparam" or see the documentation of your boot
+  loader (lilo or loadlin) about how to pass options to the kernel at
+  boot time.) This means that it is a good idea to say Y here if you
+  intend to use this kernel on different machines.
+
+  More information about the internals of the Linux math coprocessor
+  emulation can be found in <file:arch/i386/math-emu/README>.
+
+  If you are not sure, say Y; apart from resulting in a 66 KB bigger
+  kernel, it won't hurt.
+
+CONFIG_NOHIGHMEM
+  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
+  However, the address space of 32-bit x86 processors is only 4
+  Gigabytes large. That means that, if you have a large amount of
+  physical memory, not all of it can be "permanently mapped" by the
+  kernel. The physical memory that's not permanently mapped is called
+  "high memory".
+
+  If you are compiling a kernel which will never run on a machine with
+  more than 1 Gigabyte total physical RAM, answer "off" here (default
+  choice and suitable for most users). This will result in a "3GB/1GB"
+  split: 3GB are mapped so that each process sees a 3GB virtual memory
+  space and the remaining part of the 4GB virtual memory space is used
+  by the kernel to permanently map as much physical memory as
+  possible.
+
+  If the machine has between 1 and 4 Gigabytes physical RAM, then
+  answer "4GB" here.
+
+  If more than 4 Gigabytes is used then answer "64GB" here. This
+  selection turns Intel PAE (Physical Address Extension) mode on.
+  PAE implements 3-level paging on IA32 processors. PAE is fully
+  supported by Linux, PAE mode is implemented on all recent Intel
+  processors (Pentium Pro and better). NOTE: If you say "64GB" here,
+  then the kernel will not boot on CPUs that don't support PAE!
+
+  The actual amount of total physical memory will either be
+  auto detected or can be forced by using a kernel command line option
+  such as "mem=256M". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If unsure, say "off".
+
+CONFIG_HIGHMEM4G
+  Select this if you have a 32-bit processor and between 1 and 4
+  gigabytes of physical RAM.
+
+CONFIG_HIGHMEM64G
+  Select this if you have a 32-bit processor and more than 4
+  gigabytes of physical RAM.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_HOTPLUG_PCI
+  Say Y here if you have a motherboard with a PCI Hotplug controller.
+  This allows you to add and remove PCI cards while the machine is
+  powered up and running.  The file system pcihpfs must be mounted
+  in order to interact with any PCI Hotplug controllers.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pci_hotplug.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  When in doubt, say N.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_VISWS
+  The SGI Visual Workstation series is an IA32-based workstation
+  based on SGI systems chips with some legacy PC hardware attached.
+  Say Y here to create a kernel to run on the SGI 320 or 540.
+  A kernel compiled for the Visual Workstation will not run on other
+  PC boards and vice versa.
+  See <file:Documentation/sgi-visws.txt> for more.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_VIDEO_SELECT
+  This enables support for text mode selection on kernel startup. If
+  you want to take advantage of some high-resolution text mode your
+  card's BIOS offers, but the traditional Linux utilities like
+  SVGATextMode don't, you can say Y here and set the mode using the
+  "vga=" option from your boot loader (lilo or loadlin) or set
+  "vga=ask" which brings up a video mode menu on kernel startup. (Try
+  "man bootparam" or see the documentation of your boot loader about
+  how to pass options to the kernel.)
+
+  Read the file <file:Documentation/svga.txt> for more information
+  about the Video mode selection support. If unsure, say N.
+
+CONFIG_MDA_CONSOLE
+  Say Y here if you have an old MDA or monochrome Hercules graphics
+  adapter in your system acting as a second head ( = video card). You
+  will then be able to use two monitors with your Linux system. Do not
+  say Y here if your MDA card is the primary card in your system; the
+  normal VGA driver will handle it.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called mdacon.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_MTRR
+  On Intel P6 family processors (Pentium Pro, Pentium II and later)
+  the Memory Type Range Registers (MTRRs) may be used to control
+  processor access to memory ranges. This is most useful if you have
+  a video (VGA) card on a PCI or AGP bus. Enabling write-combining
+  allows bus write transfers to be combined into a larger transfer
+  before bursting over the PCI/AGP bus. This can increase performance
+  of image write operations 2.5 times or more. Saying Y here creates a
+  /proc/mtrr file which may be used to manipulate your processor's
+  MTRRs. Typically the X server should use this.
+
+  This code has a reasonably generic interface so that similar
+  control registers on other processors can be easily supported
+  as well:
+
+  The Cyrix 6x86, 6x86MX and M II processors have Address Range
+  Registers (ARRs) which provide a similar functionality to MTRRs. For
+  these, the ARRs are used to emulate the MTRRs.
+  The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
+  MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
+  write-combining. All of these processors are supported by this code
+  and it makes sense to say Y here if you have one of them.
+
+  Saying Y here also fixes a problem with buggy SMP BIOSes which only
+  set the MTRRs for the boot CPU and not for the secondary CPUs. This
+  can lead to all sorts of problems, so it's good to say Y here.
+
+  You can safely say Y even if your machine doesn't have MTRRs, you'll
+  just add about 9 KB to your kernel.
+
+  See <file:Documentation/mtrr.txt> for more information.
+
+CONFIG_PM
+  "Power Management" means that parts of your computer are shut
+  off or put into a power conserving "sleep" mode if they are not
+  being used.  There are two competing standards for doing this: APM
+  and ACPI.  If you want to use either one, say Y here and then also
+  to the requisite support below.
+
+  Power Management is most important for battery powered laptop
+  computers; if you have a laptop, check out the Linux Laptop home
+  page on the WWW at
+  <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
+  Battery Powered Linux mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that, even if you say N here, Linux on the x86 architecture
+  will issue the hlt instruction if nothing is to be done, thereby
+  sending the processor to sleep and saving power.
+
+CONFIG_ACPI
+  ACPI/OSPM support for Linux is currently under development. As such,
+  this support is preliminary and EXPERIMENTAL.  Configuring ACPI
+  support enables kernel interfaces that allow higher level software
+  (OSPM) to manipulate ACPI defined hardware and software interfaces,
+  including the evaluation of ACPI control methods.  If unsure, choose
+  N here.  Note, this option will enlarge your kernel by about 120K.
+
+  This support requires an ACPI compliant platform (hardware/firmware).
+  If both ACPI and Advanced Power Management (APM) support are
+  configured, whichever is loaded first shall be used.
+
+  This code DOES NOT currently provide a complete OSPM implementation
+  -- it has not yet reached APM's level of functionality.  When fully
+  implemented, Linux ACPI/OSPM will provide a more robust functional
+  replacement for legacy configuration and power management
+  interfaces, including the Plug-and-Play BIOS specification (PnP
+  BIOS), the Multi-Processor Specification (MPS), and the Advanced
+  Power Management specification (APM).
+
+  Linux support for ACPI/OSPM is based on Intel Corporation's ACPI
+  Component Architecture (ACPI CA). The latest ACPI CA source code,
+  documentation, debug builds, and implementation status information
+  can be downloaded from:
+  <http://developer.intel.com/technology/iapc/acpi/downloads.htm>.
+
+  The ACPI Sourceforge project may also be of interest:
+  <http://sf.net/projects/acpi/>
+
+CONFIG_APM
+  APM is a BIOS specification for saving power using several different
+  techniques. This is mostly useful for battery powered laptops with
+  APM compliant BIOSes. If you say Y here, the system time will be
+  reset after a RESUME operation, the /proc/apm device will provide
+  battery status information, and user-space programs will receive
+  notification of APM "events" (e.g. battery status change).
+
+  If you select "Y" here, you can disable actual use of the APM
+  BIOS by passing the "apm=off" option to the kernel at boot time.
+
+  Note that the APM support is almost completely disabled for
+  machines with more than one CPU.
+
+  In order to use APM, you will need supporting software. For location
+  and more information, read <file:Documentation/pm.txt> and the
+  Battery Powered Linux mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver does not spin down disk drives (see the hdparm(8)
+  manpage ("man 8 hdparm") for that), and it doesn't turn off
+  VESA-compliant "green" monitors.
+
+  This driver does not support the TI 4000M TravelMate and the ACER
+  486/DX4/75 because they don't have compliant BIOSes. Many "green"
+  desktop machines also don't have compliant BIOSes, and this driver
+  may cause those machines to panic during the boot phase.
+
+  Generally, if you don't have a battery in your machine, there isn't
+  much point in using this driver and you should say N. If you get
+  random kernel OOPSes or reboots that don't seem to be related to
+  anything, try disabling/enabling this option (or disabling/enabling
+  APM in your BIOS).
+
+  Some other things you should try when experiencing seemingly random,
+  "weird" problems:
+
+   1) make sure that you have enough swap space and that it is
+      enabled.
+   2) pass the "no-hlt" option to the kernel
+   3) switch on floating point emulation in the kernel and pass
+      the "no387" option to the kernel
+   4) pass the "floppy=nodma" option to the kernel
+   5) pass the "mem=4M" option to the kernel (thereby disabling
+      all but the first 4 MB of RAM)
+   6) make sure that the CPU is not over clocked.
+   7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+   8) disable the cache from your BIOS settings
+   9) install a fan for the video card or exchange video RAM
+   10) install a better fan for the CPU
+   11) exchange RAM chips
+   12) exchange the motherboard.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  apm.o.
+
+CONFIG_APM_IGNORE_USER_SUSPEND
+  This option will ignore USER SUSPEND requests. On machines with a
+  compliant APM BIOS, you want to say N. However, on the NEC Versa M
+  series notebooks, it is necessary to say Y because of a BIOS bug.
+
+CONFIG_APM_DO_ENABLE
+  Enable APM features at boot time. From page 36 of the APM BIOS
+  specification: "When disabled, the APM BIOS does not automatically
+  power manage devices, enter the Standby State, enter the Suspend
+  State, or take power saving steps in response to CPU Idle calls."
+  This driver will make CPU Idle calls when Linux is idle (unless this
+  feature is turned off -- see "Do CPU IDLE calls", below). This
+  should always save battery power, but more complicated APM features
+  will be dependent on your BIOS implementation. You may need to turn
+  this option off if your computer hangs at boot time when using APM
+  support, or if it beeps continuously instead of suspending. Turn
+  this off if you have a NEC UltraLite Versa 33/C or a Toshiba
+  T400CDT. This is off by default since most machines do fine without
+  this feature.
+
+CONFIG_APM_CPU_IDLE
+  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
+  On some machines, this can activate improved power savings, such as
+  a slowed CPU clock rate, when the machine is idle. These idle calls
+  are made after the idle loop has run for some length of time (e.g.,
+  333 mS). On some machines, this will cause a hang at boot time or
+  whenever the CPU becomes idle. (On machines with more than one CPU,
+  this option does nothing.)
+
+CONFIG_APM_DISPLAY_BLANK
+  Enable console blanking using the APM. Some laptops can use this to
+  turn off the LCD backlight when the screen blanker of the Linux
+  virtual console blanks the screen. Note that this is only used by
+  the virtual console screen blanker, and won't turn off the backlight
+  when using the X Window system. This also doesn't have anything to
+  do with your VESA-compliant power-saving monitor. Further, this
+  option doesn't work for all laptops -- it might not turn off your
+  backlight at all, or it might print a lot of errors to the console,
+  especially if you are using gpm.
+
+CONFIG_APM_RTC_IS_GMT
+  Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
+  stores the time in GMT (Greenwich Mean Time). Say N if your RTC
+  stores localtime.
+
+  It is in fact recommended to store GMT in your RTC, because then you
+  don't have to worry about daylight savings time changes. The only
+  reason not to use GMT in your RTC is if you also run a broken OS
+  that doesn't understand GMT.
+
+CONFIG_APM_ALLOW_INTS
+  Normally we disable external interrupts while we are making calls to
+  the APM BIOS as a measure to lessen the effects of a badly behaving
+  BIOS implementation.  The BIOS should reenable interrupts if it
+  needs to.  Unfortunately, some BIOSes do not -- especially those in
+  many of the newer IBM Thinkpads.  If you experience hangs when you
+  suspend, try setting this to Y.  Otherwise, say N.
+
+CONFIG_APM_REAL_MODE_POWER_OFF
+  Use real mode APM BIOS calls to switch off the computer. This is
+  a work-around for a number of buggy BIOSes. Switch this option on if
+  your computer crashes instead of powering off properly.
+
+CONFIG_TOSHIBA
+  This adds a driver to safely access the System Management Mode of
+  the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
+  not work on models with a Pheonix BIOS. The System Management Mode
+  is used to set the BIOS and power saving options on Toshiba portables.
+
+  For information on utilities to make use of this driver see the
+  Toshiba Linux utilities web site at:
+  <http://www.buzzard.org.uk/toshiba/>.
+
+  Say Y if you intend to run this kernel on a Toshiba portable.
+  Say N otherwise.
+
+CONFIG_I8K
+  This adds a driver to safely access the System Management Mode
+  of the CPU on the Dell Inspiron 8000. The System Management Mode
+  is used to read cpu temperature and cooling fan status and to
+  control the fans on the I8K portables.
+
+  This driver has been tested only on the Inspiron 8000 but it may
+  also work with other Dell laptops. You can force loading on other
+  models by passing the parameter `force=1' to the module. Use at
+  your own risk.
+
+  For information on utilities to make use of this driver see the
+  I8K Linux utilities web site at:
+  <http://www.debian.org/~dz/i8k/>
+
+  Say Y if you intend to run this kernel on a Dell Inspiron 8000.
+  Say N otherwise.
+
+CONFIG_MICROCODE
+  If you say Y here and also to "/dev file system support" in the
+  'File systems' section, you will be able to update the microcode on
+  Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
+  Pentium III, Pentium 4, Xeon etc.  You will obviously need the
+  actual microcode binary data itself which is not shipped with the
+  Linux kernel.
+
+  For latest news and information on obtaining all the required
+  ingredients for this driver, check:
+  <http://www.urbanmyth.org/microcode/>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called microcode.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.  If
+  you use modprobe or kmod you may also want to add the line
+  'alias char-major-10-184 microcode' to your /etc/modules.conf file.
+
+CONFIG_X86_MSR
+  This device gives privileged processes access to the x86
+  Model-Specific Registers (MSRs).  It is a character device with
+  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
+  MSR accesses are directed to a specific CPU on multi-processor
+  systems.
+
+CONFIG_X86_CPUID
+  This device gives processes access to the x86 CPUID instruction to
+  be executed on a specific processor.  It is a character device
+  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
+  /dev/cpu/31/cpuid.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_DEBUG_HIGHMEM
+  This options enables addition error checking for high memory systems.
+  Disable for production systems.
+
+CONFIG_DEBUG_KERNEL
+  Say Y here if you are developing drivers or trying to debug and
+  identify kernel problems.
+
+CONFIG_DEBUG_SLAB
+  Say Y here to have the kernel do limited verification on memory
+  allocation as well as poisoning memory on free to catch use of freed
+  memory.
+
+CONFIG_DEBUG_IOVIRT
+  Say Y here to get warned whenever an attempt is made to do I/O on
+  obviously invalid addresses such as those generated when ioremap()
+  calls are forgotten.  Memory mapped I/O will go through an extra
+  check to catch access to unmapped ISA addresses, an access method
+  that can still be used by old drivers that are being ported from
+  2.0/2.2.
+
+CONFIG_DEBUG_SPINLOCK
+  Say Y here and build SMP to catch missing spinlock initialization
+  and certain other kinds of spinlock errors commonly made.  This is
+  best used in conjunction with the NMI watchdog so that spinlock
+  deadlocks are also debuggable.
+
+CONFIG_DEBUG_BUGVERBOSE
+  Say Y here to make BUG() panics output the file name and line number
+  of the BUG call as well as the EIP and oops trace.  This aids
+  debugging but costs about 70-100K of memory.
+
diff -urN linux-2.5.3-pre4/arch/i386/boot/setup.S linux/arch/i386/boot/setup.S
--- linux-2.5.3-pre4/arch/i386/boot/setup.S	Wed Nov 28 10:24:33 2001
+++ linux/arch/i386/boot/setup.S	Thu Jan 24 12:35:30 2002
@@ -50,7 +50,8 @@
 #include <linux/compile.h>
 #include <asm/boot.h>
 #include <asm/e820.h>
-
+#include <asm/page.h>
+	
 /* Signature words to ensure LILO loaded us right */
 #define SIG1	0xAA55
 #define SIG2	0x5A5A
@@ -79,7 +80,7 @@
 # This is the setup header, and it must start at %cs:2 (old 0x9020:2)
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0202		# header version number (>= 0x0105)
+		.word	0x0203		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
 start_sys_seg:	.word	SYSSEG
@@ -152,6 +153,10 @@
 					# 0x90000 segment; the setup
 					# can be located anywhere in
 					# low memory 0x10000 or higher.
+
+ramdisk_max:	.long __MAXMEM-1	# (Header version 0x0203 or later)
+					# The highest safe address for
+					# the contents of an initrd
 
 trampoline:	call	start_of_setup
 		.space	1024
diff -urN linux-2.5.3-pre4/arch/i386/config.in linux/arch/i386/config.in
--- linux-2.5.3-pre4/arch/i386/config.in	Thu Jan 10 16:23:44 2002
+++ linux/arch/i386/config.in	Thu Jan 24 12:35:30 2002
@@ -10,19 +10,7 @@
 
 define_bool CONFIG_UID16 y
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Processor type and features'
@@ -198,9 +186,7 @@
 endmenu
 
 mainmenu_option next_comment
-comment 'General setup'
-
-bool 'Networking support' CONFIG_NET
+comment 'General options'
 
 # Visual Workstation support is utterly broken.
 # If you want to see it working mail an VW540 to hch@infradead.org 8)
@@ -249,9 +235,6 @@
    define_bool CONFIG_HOTPLUG_PCI n
 fi
 
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    choice 'Kernel core (/proc/kcore) format' \
 	"ELF		CONFIG_KCORE_ELF	\
diff -urN linux-2.5.3-pre4/arch/i386/defconfig linux/arch/i386/defconfig
--- linux-2.5.3-pre4/arch/i386/defconfig	Thu Jan 24 12:35:16 2002
+++ linux/arch/i386/defconfig	Thu Jan 24 12:35:30 2002
@@ -7,6 +7,14 @@
 CONFIG_UID16=y
 
 #
+# General setup
+#
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+
+#
 # Code maturity level options
 #
 # CONFIG_EXPERIMENTAL is not set
@@ -62,11 +70,6 @@
 CONFIG_SMP=y
 # CONFIG_MULTIQUAD is not set
 CONFIG_HAVE_DEC_LOCK=y
-
-#
-# General setup
-#
-CONFIG_NET=y
 CONFIG_X86_IO_APIC=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_PCI=y
@@ -95,9 +98,6 @@
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HOTPLUG_PCI_COMPAQ is not set
 # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
 CONFIG_KCORE_ELF=y
 # CONFIG_KCORE_AOUT is not set
 CONFIG_BINFMT_AOUT=y
diff -urN linux-2.5.3-pre4/arch/i386/kernel/apic.c linux/arch/i386/kernel/apic.c
--- linux-2.5.3-pre4/arch/i386/kernel/apic.c	Mon Jan  7 12:55:17 2002
+++ linux/arch/i386/kernel/apic.c	Thu Jan 24 12:35:30 2002
@@ -1014,7 +1014,7 @@
  */
 unsigned int apic_timer_irqs [NR_CPUS];
 
-void smp_apic_timer_interrupt(struct pt_regs * regs)
+void smp_apic_timer_interrupt(struct pt_regs regs)
 {
 	int cpu = smp_processor_id();
 
@@ -1034,7 +1034,7 @@
 	 * interrupt lock, which is the WrongThing (tm) to do.
 	 */
 	irq_enter(cpu, 0);
-	smp_local_timer_interrupt(regs);
+	smp_local_timer_interrupt(&regs);
 	irq_exit(cpu, 0);
 
 	if (softirq_pending(cpu))
diff -urN linux-2.5.3-pre4/arch/i386/kernel/i8259.c linux/arch/i386/kernel/i8259.c
--- linux-2.5.3-pre4/arch/i386/kernel/i8259.c	Thu Jan 24 12:35:16 2002
+++ linux/arch/i386/kernel/i8259.c	Thu Jan 24 12:35:30 2002
@@ -93,7 +93,7 @@
  * a much simpler SMP time architecture:
  */
 #ifdef CONFIG_X86_LOCAL_APIC
-BUILD_SMP_TIMER_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_SMP_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
 BUILD_SMP_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
 BUILD_SMP_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
 #endif
diff -urN linux-2.5.3-pre4/arch/i386/kernel/setup.c linux/arch/i386/kernel/setup.c
--- linux-2.5.3-pre4/arch/i386/kernel/setup.c	Fri Jan 11 16:24:36 2002
+++ linux/arch/i386/kernel/setup.c	Thu Jan 24 12:35:30 2002
@@ -704,10 +704,8 @@
 #define PFN_PHYS(x)	((x) << PAGE_SHIFT)
 
 /*
- * 128MB for vmalloc and initrd
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
  */
-#define VMALLOC_RESERVE	(unsigned long)(128 << 20)
-#define MAXMEM		(unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE)
 #define MAXMEM_PFN	PFN_DOWN(MAXMEM)
 #define MAX_NONPAE_PFN	(1 << 20)
 
diff -urN linux-2.5.3-pre4/arch/i386/kernel/smpboot.c linux/arch/i386/kernel/smpboot.c
--- linux-2.5.3-pre4/arch/i386/kernel/smpboot.c	Thu Jan 24 12:35:16 2002
+++ linux/arch/i386/kernel/smpboot.c	Thu Jan 24 12:35:30 2002
@@ -1018,7 +1018,7 @@
 	boot_cpu_logical_apicid = logical_smp_processor_id();
 	map_cpu_to_boot_apicid(0, boot_cpu_apicid);
 
-	global_irq_holder = 0;
+	global_irq_holder = NO_PROC_ID;
 	current->cpu = 0;
 	smp_tune_scheduling();
 
diff -urN linux-2.5.3-pre4/arch/ia64/Config.help linux/arch/ia64/Config.help
--- linux-2.5.3-pre4/arch/ia64/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/ia64/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,541 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_IA64
+  The Itanium is Intel's 64-bit successor to the 32-bit X86 line.  As
+  of early 2001 it is not yet in widespread production use.  The Linux
+  IA-64 project has a home page at <http://www.linuxia64.org/>.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_DISCONTIGMEM
+  Say Y to upport efficient handling of discontiguous physical memory,
+  for architectures which are either NUMA (Non-Uniform Memory Access)
+  or have huge holes in the physical address space for other reasons.
+  See <file:Documentation/vm/numa> for more.
+
+CONFIG_NUMA
+  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+  Access).  This option is for configuring high-end multiprocessor
+  server machines.  If in doubt, say N.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_DEVFS_FS
+  This is support for devfs, a virtual file system (like /proc) which
+  provides the file system interface to device drivers, normally found
+  in /dev. Devfs does not depend on major and minor number
+  allocations. Device drivers register entries in /dev which then
+  appear automatically, which means that the system administrator does
+  not have to create character and block special device files in the
+  /dev directory using the mknod command (or MAKEDEV script) anymore.
+
+  This is work in progress. If you want to use this, you *must* read
+  the material in <file:Documentation/filesystems/devfs/>, especially
+  the file README there.
+
+  If unsure, say N.
+
+CONFIG_DEVFS_DEBUG
+  If you say Y here, then the /dev file system code will generate
+  debugging messages. See the file
+  <file:Documentation/filesystems/devfs/boot-options> for more
+  details.
+
+  If unsure, say N.
+
+CONFIG_PM
+  "Power Management" means that parts of your computer are shut
+  off or put into a power conserving "sleep" mode if they are not
+  being used.  There are two competing standards for doing this: APM
+  and ACPI.  If you want to use either one, say Y here and then also
+  to the requisite support below.
+
+  Power Management is most important for battery powered laptop
+  computers; if you have a laptop, check out the Linux Laptop home
+  page on the WWW at
+  <http://www.cs.utexas.edu/users/kharker/linux-laptop/> and the
+  Battery Powered Linux mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that, even if you say N here, Linux on the x86 architecture
+  will issue the hlt instruction if nothing is to be done, thereby
+  sending the processor to sleep and saving power.
+
+CONFIG_ACPI
+  ACPI/OSPM support for Linux is currently under development. As such,
+  this support is preliminary and EXPERIMENTAL.  Configuring ACPI
+  support enables kernel interfaces that allow higher level software
+  (OSPM) to manipulate ACPI defined hardware and software interfaces,
+  including the evaluation of ACPI control methods.  If unsure, choose
+  N here.  Note, this option will enlarge your kernel by about 120K.
+
+  This support requires an ACPI compliant platform (hardware/firmware).
+  If both ACPI and Advanced Power Management (APM) support are
+  configured, whichever is loaded first shall be used.
+
+  This code DOES NOT currently provide a complete OSPM implementation
+  -- it has not yet reached APM's level of functionality.  When fully
+  implemented, Linux ACPI/OSPM will provide a more robust functional
+  replacement for legacy configuration and power management
+  interfaces, including the Plug-and-Play BIOS specification (PnP
+  BIOS), the Multi-Processor Specification (MPS), and the Advanced
+  Power Management specification (APM).
+
+  Linux support for ACPI/OSPM is based on Intel Corporation's ACPI
+  Component Architecture (ACPI CA). The latest ACPI CA source code,
+  documentation, debug builds, and implementation status information
+  can be downloaded from:
+  <http://developer.intel.com/technology/iapc/acpi/downloads.htm>.
+
+  The ACPI Sourceforge project may also be of interest:
+  <http://sf.net/projects/acpi/>
+
+CONFIG_ACPI_KERNEL_CONFIG
+  If you say `Y' here, Linux's ACPI support will use the
+  hardware-level system descriptions found on IA64 machines.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_ITANIUM_BSTEP_SPECIFIC
+  Select this option to build a kernel for an Itanium prototype system
+  with a B-step CPU.  You have a B-step CPU if the "revision" field in
+  /proc/cpuinfo has a value in the range from 1 to 4.
+
+CONFIG_IA64_MCA
+  Say Y here to enable machine check support for IA-64.  If you're
+  unsure, answer Y.
+
+CONFIG_DISABLE_VHPT
+  The Virtual Hash Page Table (VHPT) enhances virtual address
+  translation performance.  Normally you want the VHPT active but you
+  can select this option to disable the VHPT for debugging.  If you're
+  unsure, answer N.
+
+CONFIG_MCKINLEY_ASTEP_SPECIFIC
+  Select this option to build a kernel for an IA64 McKinley system
+  with any A-stepping CPU.
+
+CONFIG_MCKINLEY_A0_SPECIFIC
+  Select this option to build a kernel for an IA64 McKinley system
+  with an A0 or A1 stepping CPU.
+
+CONFIG_IA64_DEBUG_CMPXCHG
+  Selecting this option turns on bug checking for the IA64
+  compare-and-exchange instructions.  This is slow!  Itaniums
+  from step B3 or later don't have this problem. If you're unsure,
+  select N.
+
+CONFIG_IA64_DEBUG_IRQ
+  Selecting this option turns on bug checking for the IA64 irq_save
+  and restore instructions.  It's useful for tracking down spinlock
+  problems, but slow!  If you're unsure, select N.
+
+CONFIG_IA64_EARLY_PRINTK
+  Selecting this option uses the VGA screen for printk() output before
+  the consoles are initialised.  It is useful for debugging problems
+  early in the boot process, but only if you have a VGA screen
+  attached.  If you're unsure, select N.
+
+CONFIG_IA64_PRINT_HAZARDS
+  Selecting this option prints more information for Illegal Dependency
+  Faults, that is, for Read after Write, Write after Write or Write
+  after Read violations.  This option is ignored if you are compiling
+  for an Itanium A step processor (CONFIG_ITANIUM_ASTEP_SPECIFIC).  If
+  you're unsure, select Y.
+
+CONFIG_PERFMON
+  Selects whether support for the IA-64 performance monitor hardware
+  is included in the kernel.  This makes some kernel data-structures a
+  little bigger and slows down execution a bit, but it is still
+  usually a good idea to turn this on.  If you're unsure, say N.
+
+CONFIG_IA64_PALINFO
+  If you say Y here, you are able to get PAL (Processor Abstraction
+  Layer) information in /proc/pal.  This contains useful information
+  about the processors in your systems, such as cache and TLB sizes
+  and the PAL firmware version in use.
+
+  To use this option, you have to check that the "/proc file system
+  support" (CONFIG_PROC_FS) is enabled, too.
+
+CONFIG_IA32_SUPPORT
+  IA64 processors can run IA32 (that is, x86) binaries by emulating
+  the IA32 instruction set.  Say Y here to build in kernel support for
+  this.  If in doubt, say Y.
+
+CONFIG_EFI_VARS
+  If you say Y here, you are able to get EFI (Extensible Firmware
+  Interface) variable information in /proc/efi/vars.  You may read,
+  write, create, and destroy EFI variables through this interface.
+
+  To use this option, you have to check that the "/proc file system
+  support" (CONFIG_PROC_FS) is enabled, too.
+
+CONFIG_DEBUG_KERNEL
+  Say Y here if you are developing drivers or trying to debug and
+  identify kernel problems.
+
+CONFIG_DEBUG_SLAB
+  Say Y here to have the kernel do limited verification on memory
+  allocation as well as poisoning memory on free to catch use of freed
+  memory.
+
+CONFIG_DEBUG_SPINLOCK
+  Say Y here and build SMP to catch missing spinlock initialization
+  and certain other kinds of spinlock errors commonly made.  This is
+  best used in conjunction with the NMI watchdog so that spinlock
+  deadlocks are also debuggable.
+
diff -urN linux-2.5.3-pre4/arch/ia64/config.in linux/arch/ia64/config.in
--- linux-2.5.3-pre4/arch/ia64/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/ia64/config.in	Thu Jan 24 12:35:30 2002
@@ -1,18 +1,6 @@
 mainmenu_name "Kernel configuration of Linux for IA-64 machines"
 
-mainmenu_option next_comment
- comment 'Code maturity level options'
- bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General setup'
@@ -99,10 +87,6 @@
 tristate '/proc/pal support' CONFIG_IA64_PALINFO
 tristate '/proc/efi/vars support' CONFIG_EFI_VARS
 
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
diff -urN linux-2.5.3-pre4/arch/m68k/Config.help linux/arch/m68k/Config.help
--- linux-2.5.3-pre4/arch/m68k/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/m68k/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,1674 @@
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_WARPENGINE_SCSI
+  Support for MacroSystem Development's WarpEngine Amiga SCSI-2
+  controller. Info at
+  <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>.
+
+CONFIG_HEARTBEAT
+  Use the power-on LED on your machine as a load meter.  The exact
+  behavior is platform-dependent, but normally the flash frequency is
+  a hyperbolic function of the 5-minute load average.
+
+CONFIG_SERIAL_EXTENDED
+  If you wish to use any non-standard features of the standard "dumb"
+  driver, say Y here. This includes HUB6 support, shared serial
+  interrupts, special multiport support, support for more than the
+  four COM 1/2/3/4 boards, etc.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about serial driver options. If unsure, say N.
+
+CONFIG_SERIAL_MANY_PORTS
+  Say Y here if you have dumb serial boards other than the four
+  standard COM 1/2/3/4 ports. This may happen if you have an AST
+  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>), or other custom
+  serial port hardware which acts similar to standard serial port
+  hardware. If you only use the standard COM 1/2/3/4 ports, you can
+  say N here to save some memory. You can also say Y if you have an
+  "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+CONFIG_SERIAL_SHARE_IRQ
+  Some serial boards have hardware support which allows multiple dumb
+  serial ports on the same board to share a single IRQ. To enable
+  support for this in the serial driver, say Y here.
+
+CONFIG_SERIAL_MULTIPORT
+  Some multiport serial ports have special ports which are used to
+  signal when there are any serial ports on the board which need
+  servicing. Say Y here to enable the serial driver to take advantage
+  of those special I/O ports.
+
+CONFIG_HUB6
+  Say Y here to enable support in the dumb serial driver to support
+  the HUB6 card.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_APOLLO
+  Say Y here if you want to run Linux on an MC680x0-based Apollo
+  Domain workstation such as the DN3500.
+
+CONFIG_APOLLO_ELPLUS
+  Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
+  If you don't have one made for Apollos, you can use one from a PC,
+  except that your Apollo won't be able to boot from it (because the
+  code in the ROM will be for a PC).
+
+CONFIG_PARPORT
+  If you want to use devices connected to your machine's parallel port
+  (the connector at the computer with 25 holes), e.g. printer, ZIP
+  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+  create a mini network by connecting the parallel ports of two local
+  machines) etc., then you need to say Y here; please read
+  <file:Documentation/parport.txt> and
+  <file:drivers/parport/BUGS-parport>.
+
+  For extensive information about drivers for many devices attaching
+  to the parallel port see <http://www.torque.net/linux-pp.html> on
+  the WWW.
+
+  It is possible to share a single parallel port among several devices
+  and it is safe to compile all the corresponding drivers into the
+  kernel.  If you want to compile parallel port support as a module
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport.o.  If you have more than one parallel port and want to
+  specify which port and IRQ to be used by this driver at module load
+  time, take a look at <file:Documentation/parport.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_PC
+  You should say Y here if you have a PC-style parallel port. All IBM
+  PC compatible computers and some Alphas have PC-style parallel
+  ports.
+
+  This code is also available as a module.  If you want to compile it
+  as a module ( = code which can be inserted in and removed from the
+  running kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport_pc.o.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_AMIGA
+  Say Y here if you need support for the parallel port hardware on
+  Amiga machines. This code is also available as a module (say M),
+  called parport_amiga.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_ATARI
+  Say Y here if you need support for the parallel port hardware on
+  Atari machines. This code is also available as a module (say M),
+  called parport_atari.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_MFC3
+  Say Y here if you need parallel port support for the MFC3 card.
+  This code is also available as a module (say M), called
+  parport_mfc3.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_1284
+  If you have a printer that supports status readback or device ID, or
+  want to use a device that uses enhanced parallel port transfer modes
+  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+  transfer modes. Also say Y if you want device ID information to
+  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_BLK_DEV_SD
+  If you want to use a SCSI hard disk or the SCSI or parallel port
+  version of the IOMEGA ZIP drive under Linux, say Y and read the
+  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sd_mod.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  Do not compile this driver as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI disk. In this case, do not compile the driver
+  for your SCSI host adapter (below) as a module either.
+
+CONFIG_SD_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional disks that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_ST_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional tapes that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_CHR_DEV_ST
+  If you want to use a SCSI tape drive under Linux, say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and
+  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
+  SCSI CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called st.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_BLK_DEV_SR
+  If you want to use a SCSI CD-ROM under Linux, say Y and read the
+  SCSI-HOWTO and the CD-ROM-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  or M to "ISO 9660 CD-ROM file system support" later.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sr_mod.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_SR_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted. In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional CD-ROMs that can be loaded after
+  the first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_BLK_DEV_SR_VENDOR
+  This enables the usage of vendor specific SCSI commands. This is
+  required to support multisession CDs with old NEC/TOSHIBA cdrom
+  drives (and HP Writers). If you have such a drive and get the first
+  session only, try saying Y here; everybody else says N.
+
+CONFIG_CHR_DEV_SG
+  If you want to use SCSI scanners, synthesizers or CD-writers or just
+  about anything having "SCSI" in its name other than hard disks,
+  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+  directly, so you need some additional software which knows how to
+  talk to these devices using the SCSI protocol:
+
+  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+  writer software look at Cdrtools
+  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+  and for burning a "disk at once": CDRDAO
+  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+  For other devices, it's possible that you'll have to write the
+  driver software yourself. Please read the file
+  <file:Documentation/scsi-generic.txt> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
+  say N.
+
+CONFIG_SCSI_MULTI_LUN
+  If you have a SCSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+  can say Y here to force the SCSI driver to probe for multiple LUNs.
+  A SCSI device with multiple LUNs acts logically like multiple SCSI
+  devices. The vast majority of SCSI devices have only one LUN, and
+  so most people can say N here and should in fact do so, because it
+  is safer.
+
+CONFIG_SCSI_CONSTANTS
+  The error messages regarding your SCSI hardware will be easier to
+  understand if you say Y here; it will enlarge your kernel by about
+  12 KB. If in doubt, say Y.
+
+CONFIG_SCSI_LOGGING
+  This turns on a logging facility that can be used to debug a number
+  of SCSI related problems.
+
+  If you say Y here, no logging output will appear by default, but you
+  can enable logging by saying Y to "/proc file system support" and
+  "Sysctl support" below and executing the command
+
+     echo "scsi log token [level]" > /proc/scsi/scsi
+
+  at boot time after the /proc file system has been mounted.
+
+  There are a number of things that can be used for 'token' (you can
+  find them in the source: <file:drivers/scsi/scsi.c>), and this
+  allows you to select the types of information you want, and the
+  level allows you to select the level of verbosity.
+
+  If you say N here, it may be harder to track down some types of SCSI
+  problems. If you say Y here your kernel will be somewhat larger, but
+  there should be no noticeable performance impact as long as you have
+  logging turned off.
+
+CONFIG_SCSI_DEBUG
+  This is a host adapter simulator that can be programmed to simulate
+  a large number of conditions that could occur on a real bus. The
+  advantage is that many hard to reproduce problems can be tested in a
+  controlled environment where there is reduced risk of losing
+  important data. This is primarily of use to people trying to debug
+  the middle and upper layers of the SCSI subsystem. If unsure, say N.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_DUMMY
+  This is essentially a bit-bucket device (i.e. traffic you send to
+  this device is consigned into oblivion) with a configurable IP
+  address. It is most commonly used in order to make your currently
+  inactive SLIP address seem like a real address for local programs.
+  If you use SLIP or PPP, you might want to say Y here. Since this
+  thing often comes in handy, the default is Y. It won't enlarge your
+  kernel either. What a deal. Read about it in the Network
+  Administrator's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called dummy.o.  If you want to use more than one dummy
+  device at a time, you need to compile this driver as a module.
+  Instead of 'dummy', the devices will then be called 'dummy0',
+  'dummy1' etc.
+
+CONFIG_SLIP
+  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+  connect to your Internet service provider or to connect to some
+  other local Unix box or if you want to configure your Linux box as a
+  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+  Internet Protocol) is a protocol used to send Internet traffic over
+  serial connections such as telephone lines or null modem cables;
+  nowadays, the protocol PPP is more commonly used for this same
+  purpose.
+
+  Normally, your access provider has to support SLIP in order for you
+  to be able to use it, but there is now a SLIP emulator called SLiRP
+  around (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection. If
+  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+  NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to
+  configure SLIP. Note that you don't need this option if you just
+  want to run term (term is a program which gives you almost full
+  Internet connectivity if you have a regular dial up shell account on
+  some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>. The module will be
+  called slip.o.
+
+CONFIG_SLIP_COMPRESSED
+  This protocol is faster than SLIP because it uses compression on the
+  TCP/IP headers (not on the data itself), but it has to be supported
+  on both ends. Ask your access provider if you are not sure and
+  answer Y, just in case. You will still be able to use plain SLIP. If
+  you plan to use SLiRP, the SLIP emulator (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection, you
+  definitely want to say Y here. The NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to configure
+  CSLIP. This won't enlarge your kernel.
+
+CONFIG_SLIP_SMART
+  Adds additional capabilities to the SLIP driver to support the
+  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+  analogue lines.
+
+CONFIG_SLIP_MODE_SLIP6
+  Just occasionally you may need to run IP over hostile serial
+  networks that don't pass all control characters or are only seven
+  bit. Saying Y here adds an extra mode you can use with SLIP:
+  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+  the serial device. Naturally, this has to be supported at the other
+  end of the link as well. It's good enough, for example, to run IP
+  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+CONFIG_PPP
+  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+  the same purpose: sending Internet traffic over telephone (and other
+  serial) lines.  Ask your access provider if they support it, because
+  otherwise you can't use it; most Internet access providers these
+  days support PPP rather than SLIP.
+
+  To use PPP, you need an additional program called pppd as described
+  in the PPP-HOWTO, available at
+  <http://www.linuxdoc.org/docs.html#howto>.  Make sure that you have
+  the version of pppd recommended in <file:Documentation/Changes>.
+  The PPP option enlarges your kernel by about 16 KB.
+
+  There are actually two versions of PPP: the traditional PPP for
+  asynchronous lines, such as regular analog phone lines, and
+  synchronous PPP which can be used over digital ISDN lines for
+  example.  If you want to use PPP over phone lines or other
+  asynchronous serial lines, you need to say Y (or M) here and also to
+  the next option, "PPP support for async serial ports".  For PPP over
+  synchronous lines, you should say Y (or M) here and to "Support
+  synchronous PPP", below.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you said Y to "Version information on all symbols" above, then
+  you cannot compile the PPP driver into the kernel; you can then only
+  compile it as a module.  The module will be called ppp_generic.o.
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_PLIP
+  PLIP (Parallel Line Internet Protocol) is used to create a
+  reasonably fast mini network consisting of two (or, rarely, more)
+  local machines.  A PLIP link from a Linux box is a popular means to
+  install a Linux distribution on a machine which doesn't have a
+  CD-ROM drive (a minimal system has to be transferred with floppies
+  first). The kernels on both machines need to have this PLIP option
+  enabled for this to work.
+
+  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+  ports (the connectors at the computers with 25 holes) are connected
+  with "null printer" or "Turbo Laplink" cables which can transmit 4
+  bits at a time (mode 0) or with special PLIP cables, to be used on
+  bidirectional parallel ports only, which can transmit 8 bits at a
+  time (mode 1); you can find the wiring of these cables in
+  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+  and winsock or NCSA's telnet.
+
+  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+  as the NET-3-HOWTO, both available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that the PLIP
+  protocol has been changed and this PLIP driver won't work together
+  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+  your kernel by about 8 KB.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called plip.o.  If unsure, say Y or M, in case you buy a laptop
+  later.
+
+CONFIG_EQUALIZER
+  If you have two serial connections to some other computer (this
+  usually requires two modems and two telephone lines) and you use
+  SLIP (the protocol for sending Internet traffic over telephone
+  lines) or PPP (a better SLIP) on them, you can make them behave like
+  one double speed connection using this driver.  Naturally, this has
+  to be supported at the other end as well, either with a similar EQL
+  Linux driver or with a Livingston Portmaster 2e.
+
+  Say Y if you want this and read
+  <file:Documentation/networking/eql.txt>.  You may also want to read
+  section 6.2 of the NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eql.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_SMC9194
+  This is support for the SMC9xxx based Ethernet cards. Choose this
+  option if you have a DELL laptop with the docking station, or
+  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+  into the kernel, and read the file
+  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc9194.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NE2000
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Many Ethernet cards
+  without a specific driver are compatible with NE2000.
+
+  If you have a PCI NE2000 card however, say N here and Y to "PCI
+  NE2000 support", above. If you have a NE2000 card and are running on
+  an MCA system (a bus system used on some IBM PS/2 computers and
+  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+  below.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ne.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_SUN3LANCE
+  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
+  here to compile in the Linux driver for this and enable Ethernet.
+  General Linux information on the Sun 3 and 3x series (now
+  discontinued) is at
+  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+  If you're not building a kernel for a Sun 3, say N.
+
+CONFIG_SUN3_82586
+  This driver enables support for the on-board Intel 82586 based
+  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
+  that this driver does not support 82586-based adapters on additional
+  VME boards.
+
+CONFIG_INPUT_ADBHID
+  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
+  such as keyboards, mice, joysticks, or graphic tablets handled by
+  the input layer.  If you say Y here, make sure to say Y to the
+  corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
+  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
+  support" (CONFIG_INPUT_EVDEV) as well.
+
+  If you say N here, you still have the option of using the old ADB
+  keyboard and mouse drivers.
+
+  If unsure, say Y.
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_ADB
+  Apple Desktop Bus (ADB) support is for support of devices which
+  are connected to an ADB port.  ADB devices tend to have 4 pins.
+  If you have an Apple Macintosh prior to the iMac, or a
+  "Blue and White G3", you probably want to say Y here.  Otherwise
+  say N.
+
+CONFIG_ADB_CUDA
+  This provides support for CUDA based Power Macintosh systems.  This
+  includes most OldWorld PowerMacs, the first generation iMacs, the
+  Blue&White G3 and the Yikes G4 (PCI Graphics).  All later models
+  should use CONFIG_ADB_PMU instead.
+
+  If unsure say Y.
+
+CONFIG_ADB_KEYBOARD
+  This option allows you to use an ADB keyboard attached to your
+  machine. Note that this disables any other (ie. PS/2) keyboard
+  support, even if your machine is physically capable of using both at
+  the same time.
+
+  If you use an ADB keyboard (4 pin connector), say Y here.
+  If you use a PS/2 keyboard (6 pin connector), say N here.
+
+CONFIG_ADB_IOP
+  The I/O Processor (IOP) is an Apple custom IC designed to provide
+  intelligent support for I/O controllers.  It is described at
+  <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
+  support for it, say 'Y' here.
+
+CONFIG_ADB_MACII
+  Say Y here if want your kernel to support Macintosh systems that use
+  the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
+  Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
+  Centris 650.
+
+CONFIG_ADB_MACIISI
+  Say Y here if want your kernel to support Macintosh systems that use
+  the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
+  II, LC, LC II, LC III, Performa 460, and the Performa 600.
+
+CONFIG_ADB_PMU68K
+  Say Y here if want your kernel to support the m68k based Powerbooks.
+  This includes the PowerBook 140, PowerBook 145, PowerBook 150,
+  PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
+  PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
+  PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
+  PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
+
+CONFIG_MAC8390
+  If you want to include a driver to support Nubus or LC-PDS
+  Ethernet cards using an NS8390 chipset or its equivalent, say Y
+  and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_MAC89x0
+  Support for CS89x0 chipset based Ethernet cards.  If you have a
+  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+  read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  This module will
+  be called mac89x0.o.
+
+CONFIG_MACMACE
+  Support for the onboard AMD 79C940 MACE Ethernet controller used in
+  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
+  say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_MACSONIC
+  Support for NatSemi SONIC based Ethernet devices.  This includes
+  the onboard Ethernet in many Quadras as well as some LC-PDS,
+  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+  one of these say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  This module will
+  be called macsonic.o.
+
+CONFIG_MAC_SCSI
+  This is the NCR 5380 SCSI controller included on most of the 68030
+  based Macintoshes.  If you have one of these say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_SCSI_MAC_ESP
+  This is the NCR 53c9x SCSI controller found on most of the 68040
+  based Macintoshes.  If you have one of these say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mac_esp.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_BUSMOUSE
+  Say Y here if your machine has a bus mouse as opposed to a serial
+  mouse. Most people have a regular serial MouseSystem or
+  Microsoft mouse (made by Logitech) that plugs into a COM port
+  (rectangular with 9 or 25 pins). These people say N here. 
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  This is the generic bus mouse driver code. If you have a bus mouse,
+  you will have to say Y here and also to the specific driver for your
+  mouse below.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called busmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_WATCHDOG_NOWAYOUT
+  The default watchdog behaviour (which you get if you say N here) is
+  to stop the timer if the process managing it closes the file
+  /dev/watchdog. It's always remotely possible that this process might
+  get killed. If you say Y here, the watchdog cannot be stopped once
+  it has been started.
+
+CONFIG_SOFT_WATCHDOG
+  A software monitoring watchdog. This will fail to reboot your system
+  from some situations that the hardware watchdog will recover
+  from. Equally it's a lot cheaper to install.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called
+   softdog.o.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_NVRAM
+  If you say Y here and create a character special file /dev/nvram
+  with major number 10 and minor number 144 using mknod ("man mknod"),
+  you get read and write access to the 50 bytes of non-volatile memory
+  in the real time clock (RTC), which is contained in every PC and
+  most Ataris.
+
+  This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
+  on Ataris. /dev/nvram may be used to view settings there, or to
+  change them (with some utility). It could also be used to frequently
+  save a few bits of very important data that may not be lost over
+  power-off and for which writing to disk is too insecure. Note
+  however that most NVRAM space in a PC belongs to the BIOS and you
+  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+  for a guide to the use of CMOS bytes by your BIOS.
+
+  On Atari machines, /dev/nvram is always configured and does not need
+  to be selected.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called nvram.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_PROC_HARDWARE
+  Say Y here to support the /proc/hardware file, which gives you
+  access to information about the machine you're running on,
+  including the model, CPU, MMU, clock speed, BogoMIPS rating,
+  and memory size.
+
+CONFIG_AMIGA
+  This option enables support for the Amiga series of computers. If
+  you plan to use this kernel on an Amiga, say Y here and browse the
+  material available in <file:Documentation/m68k>; otherwise say N.
+
+CONFIG_A2232
+  This option supports the 2232 7-port serial card shipped with the
+  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+  ports were connected with 8 pin DIN connectors on the card bracket,
+  for which 8 pin to DB25 adapters were supplied. The card also had
+  jumpers internally to toggle various pinning configurations.
+
+  This driver can be built as a module; but then "generic_serial.o"
+  will also be built as a module. This has to be loaded before
+  "ser_a2232.o". If you want to do this, answer M here and read
+  "<file:Documentation/modules.txt>".
+
+CONFIG_A4000T_SCSI
+  Support for the NCR53C710 SCSI controller on the Amiga 4000T.
+
+CONFIG_A4091_SCSI
+  Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
+  (1993).  Very obscure -- the 4091 was part of an Amiga 4000 upgrade
+  plan at the time the Amiga business was sold to DKB.
+
+CONFIG_ATARI
+  This option enables support for the 68000-based Atari series of
+  computers (including the TT, Falcon and Medusa). If you plan to use
+  this kernel on an Atari, say Y here and browse the material
+  available in <file:Documentation/m68k>; otherwise say N.
+
+CONFIG_HADES
+  This option enables support for the Hades Atari clone. If you plan
+  to use this kernel on a Hades, say Y here; otherwise say N.
+
+CONFIG_MAC
+  This option enables support for the Apple Macintosh series of
+  computers (yes, there is experimental support now, at least for part
+  of the series).
+
+  Say N unless you're willing to code the remaining necessary support.
+  ;)
+
+CONFIG_HP300
+  This option enables support for the HP9000/300 series of
+  workstations. Support for these machines is still very experimental.
+  If you plan to try to use the kernel on such a machine say Y here.
+  Everybody else says N.
+
+CONFIG_Q40
+  The Q40 is a Motorola 68040-based successor to the Sinclair QL
+  manufactured in Germany.  There is an official Q40 home page at
+  <http://www.q40.de/>.  This option enables support for the Q40 and
+  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
+  emulation.
+
+CONFIG_SUN3
+  This option enables support for the Sun 3 series of workstations.
+  Currently, only the Sun 3/80 is supported within the Sun 3x family.
+  You will also want to enable 68030 support.  General Linux
+  information on the Sun 3x series (now discontinued) is at
+  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+  If you don't want to compile a kernel for a Sun 3, say N.
+
+CONFIG_SUN3X
+  This option enables support for the Sun 3x series of workstations.
+  Be warned that this support is very experimental. You will also want
+  to say Y to 68020 support and N to the other processors below.
+  General Linux information on the Sun 3x series (now discontinued)
+  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+  If you don't want to compile a kernel for a Sun 3x, say N.
+
+CONFIG_SUN3X_ZS
+  ZS refers to a type of asynchronous serial port built in to the Sun3
+  and Sun3x workstations; if you have a Sun 3, you probably have
+  these.  Say 'Y' to support ZS ports directly.  This option must be
+  enabled in order to support the
+  keyboard and mouse ports.
+
+CONFIG_SUN_KEYBOARD
+  Say Y here to support the keyboard found on Sun 3 and 3x
+  workstations.  It can also be used support Sun Type-5 keyboards
+  through an adaptor.  See
+  <http://www.suse.cz/development/input/adapters.html> and
+  <http://sourceforge.net/projects/linuxconsole/> for details on the
+  latter.
+
+CONFIG_M68020
+  If you anticipate running this kernel on a computer with a MC68020
+  processor, say Y. Otherwise, say N. Note that the 68020 requires a
+  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
+  Sun 3, which provides its own version.
+
+CONFIG_M68030
+  If you anticipate running this kernel on a computer with a MC68030
+  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
+  work, as it does not include an MMU (Memory Management Unit).
+
+CONFIG_M68040
+  If you anticipate running this kernel on a computer with a MC68LC040
+  or MC68040 processor, say Y. Otherwise, say N. Note that an
+  MC68EC040 will not work, as it does not include an MMU (Memory
+  Management Unit).
+
+CONFIG_M68060
+  If you anticipate running this kernel on a computer with a MC68060
+  processor, say Y. Otherwise, say N.
+
+CONFIG_M68KFPU_EMU
+  At some point in the future, this will cause floating-point math
+  instructions to be emulated by the kernel on machines that lack a
+  floating-point math coprocessor.  Thrill-seekers and chronically
+  sleep-deprived psychotic hacker types can say Y now, everyone else
+  should probably wait a while.
+
+CONFIG_M68KFPU_EMU_ONLY
+  This option prevents any floating-point instructions from being
+  compiled into the kernel, thereby the kernel doesn't save any
+  floating point context anymore during task switches, so this
+  kernel will only be usable on machines without a floating-point
+  math coprocessor. This makes the kernel a bit faster as no tests
+  needs to be executed whether a floating-point instruction in the
+  kernel should be executed or not.
+
+CONFIG_M68KFPU_EMU_EXTRAPREC
+  The fpu uses normally a few bit more during calculations for
+  correct rounding, the emulator can (often) do the same but this
+  extra calculation can cost quite some time, so you can disable
+  it here. The emulator will then "only" calculate with a 64 bit
+  mantissa and round slightly incorrect, what is more then enough
+  for normal usage.
+
+CONFIG_ADVANCED
+  This gives you access to some advanced options for the CPU. The
+  defaults should be fine for most users, but these options may make
+  it possible for you to improve performance somewhat if you know what
+  you are doing.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these options.
+
+  Most users should say N to this question.
+
+CONFIG_SINGLE_MEMORY_CHUNK
+  Ignore all but the first contiguous chunk of physical memory for VM
+  purposes.  This will save a few bytes kernel size and may speed up
+  some operations.  Say N if not sure.
+
+CONFIG_RMW_INSNS
+  This allows to use certain instructions that work with indivisible
+  read-modify-write bus cycles. While this is faster than the
+  workaround of disabling interrupts, it can conflict with DMA
+  ( = direct memory access) on many Amiga systems, and it is also said
+  to destabilize other machines. It is very likely that this will
+  cause serious problems on any Amiga or Atari Medusa if set. The only
+  configuration where it should work are 68030-based Ataris, where it
+  apparently improves performance. But you've been warned! Unless you
+  really know what you are doing, say N. Try Y only if you're quite
+  adventurous.
+
+CONFIG_ZORRO
+  This enables support for the Zorro bus in the Amiga. If you have
+  expansion cards in your Amiga that conform to the Amiga
+  AutoConfig(tm) specification, say Y, otherwise N. Note that even
+  expansion cards that do not fit in the Zorro slots but fit in e.g.
+  the CPU slot may fall in this category, so you have to say Y to let
+  Linux use these.
+
+CONFIG_AMIGA_PCMCIA
+  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+  600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+CONFIG_WHIPPET_SERIAL
+  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
+  is no listing for the Whippet in their Amiga section.
+
+CONFIG_STRAM_SWAP
+  Some Atari 68k macines (including the 520STF and 1020STE) divide
+  their addressible memory into ST and TT sections.  The TT section
+  (up to 512MB) is the main memory; the ST section (up to 4MB) is
+  accessible to the built-in graphics board, runs slower, and is
+  present mainly for backward compatibility with older machines.
+
+  This enables support for using (parts of) ST-RAM as swap space,
+  instead of as normal system memory. This can first enhance system
+  performance if you have lots of alternate RAM (compared to the size
+  of ST-RAM), because executable code always will reside in faster
+  memory. ST-RAM will remain as ultra-fast swap space. On the other
+  hand, it allows much improved dynamic allocations of ST-RAM buffers
+  for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
+  sound). The probability that such allocations at module load time
+  fail is drastically reduced.
+
+CONFIG_STRAM_PROC
+  Say Y here to report ST-RAM usage statistics in /proc/stram.  See
+  the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
+  uses.
+
+CONFIG_A3000_SCSI
+  If you have an Amiga 3000 and have SCSI devices connected to the
+  built-in SCSI controller, say Y. Otherwise, say N. This driver is
+  also available as a module ( = code which can be inserted in and
+  removed from the running kernel whenever you want). The module is
+  called wd33c93.o. If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.
+
+CONFIG_A2091_SCSI
+  If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
+  say N. This driver is also available as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want). The module is called wd33c93.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_GVP11_SCSI
+  If you have a Great Valley Products Series II SCSI controller,
+  answer Y. Also say Y if you have a later model of GVP SCSI
+  controller (such as the GVP A4008 or a Combo board). Otherwise,
+  answer N. This driver does NOT work for the T-Rex series of
+  accelerators from TekMagic and GVP-M.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module will be called gvp11.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_CYBERSTORM_SCSI
+  If you have an Amiga with an original (MkI) Phase5 Cyberstorm
+  accelerator board and the optional Cyberstorm SCSI controller,
+  answer Y. Otherwise, say N.
+
+CONFIG_CYBERSTORMII_SCSI
+  If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
+  and the optional Cyberstorm SCSI controller, say Y. Otherwise,
+  answer N.
+
+CONFIG_BLZ2060_SCSI
+  If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
+  and want to use the onboard SCSI controller, say Y. Otherwise,
+  answer N.
+
+CONFIG_BLZ1230_SCSI
+  If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
+  1260 accelerator, and the optional SCSI module, say Y. Otherwise,
+  say N.
+
+CONFIG_BLZ603EPLUS_SCSI
+  If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
+  accelerator, say Y. Otherwise, say N.
+
+CONFIG_FASTLANE_SCSI
+  If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
+  one in the near future, say Y to this question. Otherwise, say N.
+
+CONFIG_OKTAGON_SCSI
+  If you have the BSC Oktagon SCSI disk controller for the Amiga, say
+  Y to this question.  If you're in doubt about whether you have one,
+  see the picture at
+  <http://amiga.multigraph.com/photos/oktagon.html>.
+
+CONFIG_ATARI_SCSI
+  If you have an Atari with built-in NCR5380 SCSI controller (TT,
+  Falcon, ...) say Y to get it supported. Of course also, if you have
+  a compatible SCSI controller (e.g. for Medusa).  This driver is also
+  available as a module ( = code which can be inserted in and removed
+  from the running kernel whenever you want).  The module is called
+  atari_scsi.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.  This driver supports both
+  styles of NCR integration into the system: the TT style (separate
+  DMA), and the Falcon style (via ST-DMA, replacing ACSI).  It does
+  NOT support other schemes, like in the Hades (without DMA).
+
+CONFIG_ATARI_SCSI_TOSHIBA_DELAY
+  This option increases the delay after a SCSI arbitration to
+  accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
+  use a Toshiba CD-ROM drive; otherwise, the option is not needed and
+  would impact performance a bit, so say N.
+
+CONFIG_ATARI_SCSI_RESET_BOOT
+  Reset the devices on your Atari whenever it boots.  This makes the
+  boot process fractionally longer but may assist recovery from errors
+  that leave the devices with SCSI operations partway completed.
+
+CONFIG_TT_DMA_EMUL
+  This option enables code which emulates the TT SCSI DMA chip on the
+  Hades. This increases the SCSI transfer rates at least ten times
+  compared to PIO transfers.
+
+CONFIG_ARIADNE
+  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+  Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called ariadne.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ARIADNE2
+  This driver is for the Village Tronic Ariadne II and the Individual
+  Computers X-Surf Ethernet cards. If you have such a card, say Y.
+  Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ariadne2.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_A2065
+  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+  say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called a2065.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_HYDRA
+  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called hydra.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUN3_SCSI
+  This option will enable support for the OBIO (onboard io) NCR5380
+  SCSI controller found in the Sun 3/50 and 3/60.  Note that this
+  driver does not provide support for VME SCSI boards.
+  General Linux information on the Sun 3 series (now discontinued)
+  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+CONFIG_SUN3X_ESP
+  The ESP was an on-board SCSI controller used on Sun 3/80
+  machines.  Say Y here to compile in support for it.
+
+CONFIG_APNE
+  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+  say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called apne.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ATARILANCE
+  Say Y to include support for several Atari Ethernet adapters based
+  on the AMD Lance chipset: RieblCard (with or without battery), or
+  PAMCard VME (also the version by Rhotron, with different addresses).
+
+CONFIG_ATARI_BIONET
+  Say Y to include support for BioData's BioNet-100 Ethernet adapter
+  for the ACSI port. The driver works (has to work...) with a polled
+  I/O scheme, so it's rather slow :-(
+
+CONFIG_ATARI_PAMSNET
+  Say Y to include support for the PAMsNet Ethernet adapter for the
+  ACSI port ("ACSI node"). The driver works (has to work...) with a
+  polled I/O scheme, so it's rather slow :-(
+
+CONFIG_AMIGAMOUSE
+  If you want to be able to use an Amiga mouse in Linux, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called amigamouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ATARIMOUSE
+  If you want to be able to use an Atari mouse in Linux, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called atarimouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ATARI_MFPSER
+  If you like to use the MFP serial ports ("Modem1", "Serial1") under
+  Linux, say Y. The driver equally supports all kinds of MFP serial
+  ports and automatically detects whether Serial1 is available.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  Note for Falcon users: You also have an MFP port, it's just not
+  wired to the outside... But you could use the port under Linux.
+
+CONFIG_ATARI_SCC
+  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
+  LAN) and like to use them under Linux, say Y. All built-in SCC's are
+  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
+  two connectors for channel A (Serial2 and LAN), they are visible as
+  two separate devices.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ATARI_SCC_DMA
+  This enables DMA support for receiving data on channel A of the SCC.
+  If you have a TT you may say Y here and read
+  drivers/char/atari_SCC.README. All other users should say N here,
+  because only the TT has SCC-DMA, even if your machine keeps claiming
+  so at boot time.
+
+CONFIG_ATARI_MIDI
+  If you want to use your Atari's MIDI port in Linux, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ATARI_DSP56K
+  If you want to be able to use the DSP56001 in Falcons, say Y. This
+  driver is still experimental, and if you don't know what it is, or
+  if you don't have this processor, just say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_AMIGA_BUILTIN_SERIAL
+  If you want to use your Amiga's built-in serial port in Linux,
+  answer Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_GVPIOEXT
+  If you want to use a GVP IO-Extender serial card in Linux, say Y.
+  Otherwise, say N.
+
+CONFIG_GVPIOEXT_LP
+  Say Y to enable driving a printer from the parallel port on your
+  GVP IO-Extender card, N otherwise.
+
+CONFIG_GVPIOEXT_PLIP
+  Say Y to enable doing IP over the parallel port on your GVP
+  IO-Extender card, N otherwise.
+
+CONFIG_MULTIFACE_III_TTY
+  If you want to use a Multiface III card's serial port in Linux,
+  answer Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_HPDCA
+  If you want to use the internal "DCA" serial ports on an HP300
+  machine, say Y here.
+
+CONFIG_HPLANCE
+  If you want to use the builtin "LANCE" Ethernet controller on an
+  HP300 machine, say Y here.
+
+CONFIG_DIO
+  Say Y here to enable support for the "DIO" expansion bus used in
+  HP300 machines. If you are using such a system you almost certainly
+  want this.
+
+CONFIG_MAC_ADBKEYCODES
+  This provides support for sending raw ADB keycodes to console
+  devices.  This is the default up to 2.4.0, but in future this may be
+  phased out in favor of generic Linux keycodes.  If you say Y here,
+  you can dynamically switch via the
+      /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
+  sysctl and with the "keyboard_sends_linux_keycodes=" kernel
+  argument.
+
+  If unsure, say Y here.
+
+CONFIG_MAC_EMUMOUSEBTN
+  This provides generic support for emulating the 2nd and 3rd mouse
+  button with keypresses.  If you say Y here, the emulation is still
+  disabled by default.  The emulation is controlled by these sysctl
+  entries:
+      /proc/sys/dev/mac_hid/mouse_button_emulation
+      /proc/sys/dev/mac_hid/mouse_button2_keycode
+      /proc/sys/dev/mac_hid/mouse_button3_keycode
+
+CONFIG_VME
+  Say Y here if you want to build a kernel for a 680x0 based VME
+  board.  Boards currently supported include Motorola boards MVME147,
+  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
+  BVME6000 boards from BVM Ltd are also supported.
+
+CONFIG_MVME147
+  Say Y to include support for early Motorola VME boards.  This will
+  build a kernel which can run on MVME147 single-board computers.  If
+  you select this option you will have to select the appropriate
+  drivers for SCSI, Ethernet and serial ports later on.
+
+CONFIG_MVME16x
+  Say Y to include support for Motorola VME boards.  This will build a
+  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
+  MVME177 boards.  If you select this option you will have to select
+  the appropriate drivers for SCSI, Ethernet and serial ports later
+  on.
+
+CONFIG_BVME6000
+  Say Y to include support for VME boards from BVM Ltd.  This will
+  build a kernel which can run on BVME4000 and BVME6000 boards.  If
+  you select this option you will have to select the appropriate
+  drivers for SCSI, Ethernet and serial ports later on.
+
+CONFIG_060_WRITETHROUGH
+  The 68060 generally uses copyback caching of recently accessed data.
+  Copyback caching means that memory writes will be held in an on-chip
+  cache and only written back to memory some time later.  Saying Y
+  here will force supervisor (kernel) accesses to use writethrough
+  caching.  Writethrough caching means that data is written to memory
+  straight away, so that cache and memory data always agree.
+  Writethrough caching is less efficient, but is needed for some
+  drivers on 68060 based systems where the 68060 bus snooping signal
+  is hardwired on.  The 53c710 SCSI driver is known to suffer from
+  this problem.
+
+CONFIG_MVME147_SCSI
+  Support for the on-board SCSI controller on the Motorola MVME147
+  single-board computer.
+
+CONFIG_MVME147_SCC
+  This is the driver for the serial ports on the Motorola MVME147
+  boards.  Everyone using one of these boards should say Y here.
+
+CONFIG_MVME16x_SCSI
+  The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
+  SCSI controller chip.  Almost everyone using one of these boards
+  will want to say Y to this question.
+
+CONFIG_BVME6000_SCSI
+  The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
+  SCSI controller chip.  Almost everyone using one of these boards
+  will want to say Y to this question.
+
+CONFIG_MVME147_NET
+  Support for the on-board Ethernet interface on the Motorola MVME147
+  single-board computer.  Say Y here to include the
+  driver for this chip in your kernel.   If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MVME16x_NET
+  This is the driver for the Ethernet interface on the Motorola
+  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
+  driver for this chip in your kernel.   If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BVME6000_NET
+  This is the driver for the Ethernet interface on BVME4000 and
+  BVME6000 VME boards.  Say Y here to include the driver for this chip
+  in your kernel.   If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.
+
+CONFIG_SERIAL167
+  This is the driver for the serial ports on the Motorola MVME166,
+  167, and 172 boards.  Everyone using one of these boards should say
+  Y here.
+
+CONFIG_MVME162_SCC
+  This is the driver for the serial ports on the Motorola MVME162 and
+  172 boards.  Everyone using one of these boards should say Y here.
+
+CONFIG_BVME6000_SCC
+  This is the driver for the serial ports on the BVME4000 and BVME6000
+  boards from BVM Ltd.  Everyone using one of these boards should say
+  Y here.
+
diff -urN linux-2.5.3-pre4/arch/m68k/config.in linux/arch/m68k/config.in
--- linux-2.5.3-pre4/arch/m68k/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/m68k/config.in	Thu Jan 24 12:35:30 2002
@@ -9,19 +9,7 @@
 
 mainmenu_name "Linux/68k Kernel Configuration"
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Platform dependent setup'
@@ -89,10 +77,6 @@
 mainmenu_option next_comment
 comment 'General setup'
 
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    choice 'Kernel core (/proc/kcore) format' \
 	"ELF		CONFIG_KCORE_ELF	\
diff -urN linux-2.5.3-pre4/arch/mips/Config.help linux/arch/mips/Config.help
--- linux-2.5.3-pre4/arch/mips/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/mips/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,931 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_ACER_PICA_61
+  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+  kernel that runs on these, say Y here. For details about Linux on
+  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+  <http://oss.sgi.com/mips/>.
+
+CONFIG_ALGOR_P4032
+  This is an evaluation board of the British company Algorithmics.
+  The board uses the R4300 and a R5230 CPUs.  For more information
+  about this board see <http://www.algor.co.uk/>.
+
+CONFIG_BAGET_MIPS
+  This enables support for the Baget, a Russian embedded system.  For
+  more details about the Baget see the Linux/MIPS FAQ on
+  <http://oss.sgi.com/mips/>.
+
+CONFIG_DECSTATION
+  This enables support for DEC's MIPS based workstations.  For details
+  see the Linux/MIPS FAQ on <http://oss.sgi.com/mips/> and the
+  DECstation porting pages on <http://decstation.unix-ag.org/>.
+
+  If you have one of the following DECstation Models you definitely
+  want to choose R4xx0 for the CPU Type:
+
+	DECstation 5000/50
+	DECstation 5000/150
+	DECstation 5000/260
+	DECsystem 5900/260
+
+  otherwise choose R3000.
+
+CONFIG_MOMENCO_OCELOT
+  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+  Momentum Computer <http://www.momenco.com/>.
+
+CONFIG_DDB5074
+  This enables support for the VR5000-based NEC DDB Vrc-5074
+  evaluation board.
+
+CONFIG_DDB5476
+  This enables support for the R5432-based NEC DDB Vrc-5476
+  evaluation board.
+
+  Features : kernel debugging, serial terminal, NFS root fs, on-board
+  ether port (Need an additional patch at <http://linux.junsun.net/>),
+  USB, AC97, PCI, PCI VGA card & framebuffer console, IDE controller,
+  PS2 keyboard, PS2 mouse, etc.
+
+CONFIG_DDB5477
+  This enables support for the R5432-based NEC DDB Vrc-5477
+  evaluation board.
+
+  Features : kernel debugging, serial terminal, NFS root fs, on-board
+  ether port (Need an additional patch at <http://linux.junsun.net/>),
+  USB, AC97, PCI, etc.
+
+CONFIG_MIPS_ATLAS
+  This enables support for the QED R5231-based MIPS Atlas evaluation
+  board.
+
+CONFIG_MIPS_MALTA
+  This enables support for the VR5000-based MIPS Malta evaluation
+  board.
+
+CONFIG_MIPS_MAGNUM_4000
+  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+  kernel that runs on these, say Y here. For details about Linux on
+  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+  <http://oss.sgi.com/mips/>.
+
+CONFIG_QTRONIX_KEYBOARD
+  Images of Qtronix keyboards are at
+  <http://www.qtronix.com/keyboard.html>.
+
+CONFIG_OLIVETTI_M700
+  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+  kernel that runs on these, say Y here. For details about Linux on
+  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+  <http://oss.sgi.com/mips/>.
+
+CONFIG_SNI_RM200_PCI
+  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
+  Nixdorf Informationssysteme (SNI), parent company of Pyramid
+  Technology and now in turn merged with Fujitsu.  Say Y here to
+  support this machine type.
+
+CONFIG_SGI_IP22
+  This are the SGI Indy, Challenge S and Indigo2, as well as certain
+  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+  that runs on these, say Y here.
+
+CONFIG_MIPS_GT96100
+  Say Y here to support the Galileo Technology GT96100 communications
+  controller card.  There is a web page at <http://www.galileot.com/>.
+
+CONFIG_DZ
+  DZ11-family serial controllers for VAXstations, including the
+  DC7085, M7814, and M7819.
+
+CONFIG_TC
+  TurboChannel is a DEC (now Compaq) bus for Alpha and MIPS processors.
+  Documentation on writing device drivers for TurboChannel is available at:
+  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
+
+CONFIG_ZS
+  Documentation on the Zilog 85C350 serial communications controller
+  is downloadable at <http://www.zilog.com/pdfs/serial/z85c30.pdf>.
+
+CONFIG_CPU_R3000
+  Please make sure to pick the right CPU type. Linux/MIPS is not
+  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
+  *not* work on R4000 machines and vice versa.  However, since most
+  of the supported machines have an R4000 (or similar) CPU, R4x00
+  might be a safe bet.  If the resulting kernel does not work,
+  try to recompile with R3000.
+
+  R3000    MIPS Technologies R3000-series processors,
+           including the 3041, 3051, and 3081.
+
+  R6000    MIPS Technologies R6000-series processors,
+           including the 64474, 64475, 64574 and 64575.
+
+  R4300    MIPS Technologies R4300-series processors.
+
+  R4x00    MIPS Technologies R4000-series processors other than 4300,
+           including the 4640, 4650, and 4700.
+
+  R5000    MIPS Technologies R5000-series processors other than the
+           Nevada.
+
+  R52xx    MIPS Technologies R52xx-series ("Nevada") processors.
+
+  R10000   MIPS Technologies R10000-series processors.
+
+CONFIG_CPU_R6000
+  MIPS Technologies R6000-series processors, including the 64474,
+  64475, 64574 and 64575.
+
+CONFIG_CPU_R4300
+  MIPS Technologies R4300-series processors.
+
+CONFIG_CPU_R4X00
+  MIPS Technologies R4000-series processors other than 4300, including
+  the 4640, 4650, and 4700.
+
+CONFIG_CPU_R5000
+  MIPS Technologies R5000-series processors other than the Nevada.
+
+CONFIG_CPU_NEVADA
+  MIPS Technologies R52x0-series ("Nevada") processors.
+
+CONFIG_CPU_R10000
+  MIPS Technologies R10000-series processors.
+
+CONFIG_CPU_VR41XX
+  The options selects support for the NEC VR41xx series of processors.
+  Only choose this option if you have one of these processors as a
+  kernel built with this option will not run on any other type of
+  processor or vice versa.
+
+CONFIG_CPU_ADVANCED
+  Saying yes here allows you to select support for various features
+  your CPU may or may not have.  Most people should say N here.
+
+CONFIG_CPU_HAS_LLSC
+  MIPS R4000 series and later provide the Load Linked (ll)
+  and Store Conditional (sc) instructions. More information is
+  available at <http://www.go-ecs.com/mips/miptek1.htm>.
+
+  Say Y here if your CPU has the ll and sc instructions.  Say Y here
+  for better performance, N if you don't know.  You must say Y here
+  for multiprocessor machines.
+
+CONFIG_CPU_HAS_LLDSCD
+  Say Y here if your CPU has the lld and scd instructions, the 64-bit
+  equivalents of ll and sc.  Say Y here for better performance, N if
+  you don't know.  You must say Y here for multiprocessor machines.
+
+CONFIG_CPU_HAS_WB
+  Say N here for slightly better performance.  You must say Y here for
+  machines which require flushing of write buffers in software.  Saying
+  Y is the safe option; N may result in kernel malfunction and crashes.
+
+CONFIG_CPU_LITTLE_ENDIAN
+  Some MIPS machines can be configured for either little or big endian
+  byte order. These modes require different kernels. Say Y if your
+  machine is little endian, N if it's a big endian machine.
+
+CONFIG_SGI_NEWPORT_CONSOLE
+  Say Y here if you want the console on the Newport aka XL graphics
+  card of your Indy.  Most people say Y here.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_FB
+  The frame buffer device provides an abstraction for the graphics
+  hardware. It represents the frame buffer of some video hardware and
+  allows application software to access the graphics hardware through
+  a well-defined interface, so the software doesn't need to know
+  anything about the low-level (hardware register) stuff.
+
+  Frame buffer devices work identically across the different
+  architectures supported by Linux and make the implementation of
+  application programs easier and more portable; at this point, an X
+  server exists which uses the frame buffer device exclusively.
+  On several non-X86 architectures, the frame buffer device is the
+  only way to use the graphics hardware.
+
+  The device is accessed through special device nodes, usually located
+  in the /dev directory, i.e. /dev/fb*.
+
+  You need an utility program called fbset to make full use of frame
+  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+  and the Framebuffer-HOWTO at
+  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+  information.
+
+  Say Y here and to the driver for your graphics board below if you
+  are compiling a kernel for a non-x86 architecture.
+
+  If you are compiling for the x86 architecture, you can say Y if you
+  want to play with it, but it is not essential. Please note that
+  running graphical applications that directly touch the hardware
+  (e.g. an accelerated X server) and that are not frame buffer
+  device-aware may cause unexpected results. If unsure, say N.
+
+CONFIG_FONT_8x16
+  This is the "high resolution" font for the VGA frame buffer (the one
+  provided by the VGA text console 80x25 mode.
+
+  If unsure, say Y.
+
+CONFIG_MDA_CONSOLE
+  Say Y here if you have an old MDA or monochrome Hercules graphics
+  adapter in your system acting as a second head ( = video card). You
+  will then be able to use two monitors with your Linux system. Do not
+  say Y here if your MDA card is the primary card in your system; the
+  normal VGA driver will handle it.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called mdacon.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_MODULES
+  Kernel modules are small pieces of compiled code which can be
+  inserted in or removed from the running kernel, using the programs
+  insmod and rmmod. This is described in the file
+  <file:Documentation/modules.txt>, including the fact that you have
+  to say "make modules" in order to compile the modules that you chose
+  during kernel configuration.  Modules can be device drivers, file
+  systems, binary executable formats, and so on. If you think that you
+  may want to make use of modules with this kernel in the future, then
+  say Y here.  If unsure, say Y.
+
+CONFIG_MODVERSIONS
+  Usually, modules have to be recompiled whenever you switch to a new
+  kernel.  Saying Y here makes it possible, and safe, to use the
+  same modules even after compiling a new kernel; this requires the
+  program modprobe. All the software needed for module support is in
+  the modutils package (check the file <file:Documentation/Changes>
+  for location and latest version).  NOTE: if you say Y here but don't
+  have the program genksyms (which is also contained in the above
+  mentioned modutils package), then the building of your kernel will
+  fail.  If you are going to use modules that are generated from
+  non-kernel sources, you would benefit from this option.  Otherwise
+  it's not that important.  So, N ought to be a safe bet.
+
+CONFIG_KMOD
+  Normally when you have selected some drivers and/or file systems to
+  be created as loadable modules, you also have the responsibility to
+  load the corresponding modules (using the programs insmod or
+  modprobe) before you can use them. If you say Y here however, the
+  kernel will be able to load modules for itself: when a part of the
+  kernel needs a module, it runs modprobe with the appropriate
+  arguments, thereby loading the module if it is available. (This is a
+  replacement for kerneld.) Say Y here and read about configuring it
+  in <file:Documentation/kmod.txt>.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_MOUSE
+  This is for machines with a mouse which is neither a serial nor a
+  bus mouse. Examples are PS/2 mice (such as the track balls on some
+  laptops) and some digitizer pads. Most people have a regular serial
+  MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
+  COM port (rectangular with 9 or 25 pins). These people say N here.
+  If you have something else, read the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
+  information about all non-serial mice, not just bus mice.
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about non-serial mice. If unsure, say Y.
+
+CONFIG_PSMOUSE
+  The PS/2 mouse connects to a special mouse port that looks much like
+  the keyboard port (small circular connector with 6 pins). This way,
+  the mouse does not use any serial ports. This port can also be used
+  for other input devices like light pens, tablets, keypads. Compaq,
+  AST and IBM all use this as their mouse port on currently shipping
+  machines. The trackballs of some laptops are PS/2 mice also. In
+  particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse.
+
+  Although PS/2 mice are not technically bus mice, they are explained
+  in detail in the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  When using a PS/2 mouse, you can get problems if you want to use the
+  mouse both on the Linux console and under X. Using the "-R" option
+  of the Linux mouse managing program gpm (available from
+  <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
+  the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_CROSSCOMPILE
+  Say Y here if you are compiling the kernel on a different
+  architecture than the one it is intended to run on.
+
+CONFIG_MIPS_EV64120
+  This is an evaluation board based on the Galileo GT-64120
+  single-chip system controller that contains a MIPS R5000 compatible
+  core running at 75/100MHz.  Their website is located at
+  <http://www.galileot.com/>.  Say Y here if you wish to build a
+  kernel for this platform.
+
+CONFIG_MIPS_EV96100
+  This is an evaluation board based on the Galielo GT-96100 LAN/WAN
+  communications controllers containing a MIPS R5000 compatible core
+  running at 83MHz. Their website is <http://www.galileot.com/>. Say Y
+  here if you wish to build a kernel for this platform.
+
+CONFIG_MIPS_ITE8172
+  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
+  with ATX form factor that utilizes a MIPS R5000 to work with its
+  ITE8172G companion internet appliance chip. The MIPS core can be
+  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
+  a kernel for this platform.
+
+CONFIG_MIPS_IVR
+  This is an evaluation board built by Globespan to showcase thir
+  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
+  R5000 MIPS core. More information can be found out their website
+  located at <http://www.globespan.net/products/product4.html>P. Say Y
+  here if you wish to build a kernel for this platform.
+
+CONFIG_MIPS_PB1000
+  This is an evaluation board built by Alchemy Semiconducttor to
+  showcase their Au1000 Internet Edge Processor. It is SOC design
+  containing a MIPS32 core running at 266/400/500MHz with many
+  integrated peripherals. Further information can be found at their
+  website, <http://www.alchemysemi.com/>. Say Y here if you wish to
+  build a kernel for this platform.
+
+CONFIG_NINO
+  Say Y here to select a kernel for the Philips Nino Palm PC. The
+  website at <http://www.realitydiluted.com/projects/nino/index.html>
+  will have more information.
+
+CONFIG_NINO_16MB
+  Say Y here to build a kernel specifically for Nino 500/501 color
+  Palm PCs from Philips (INCOMPLETE).
+
+CONFIG_NINO_8MB
+  Say Y here to build a kernel specifically for Nino Palm PCs with
+  8MB of memory. These include models 200/210/312/320/325/350/390.
+
+CONFIG_NINO_4MB
+  Say Y here to build a kernel specifically for Nino Palm PCs with
+  4MB of memory. These include models 300/301/302/319.
+
+CONFIG_LL_DEBUG
+  Enable low-level debugging assertion macros in the kernel code.
+  Currently used only by the time services code in the MIPS port.
+  Don't turn this on unless you know what you are doing.
+
+CONFIG_REMOTE_DEBUG
+  If you say Y here, it will be possible to remotely debug the MIPS
+  kernel using gdb. This enlarges your kernel image disk size by
+  several megabytes and requires a machine with more than 16 MB,
+  better 32 MB RAM to avoid excessive linking time. This is only
+  useful for kernel hackers. If unsure, say N.
+
+CONFIG_MIPS_UNCACHED
+  If you say Y here there kernel will disable all CPU caches.  This will
+  reduce the system's performance dramatically but can help finding
+  otherwise hard to track bugs.  It can also useful if you're doing
+  hardware debugging with a logic analyzer and need to see all traffic
+  on the bus.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_GDB_CONSOLE
+  If you are using GDB for remote debugging over a serial port and
+  would like kernel messages to be formatted into GDB $O packets so
+  that GDB prints them as program output, say 'Y'.
+
diff -urN linux-2.5.3-pre4/arch/mips/config.in linux/arch/mips/config.in
--- linux-2.5.3-pre4/arch/mips/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/mips/config.in	Thu Jan 24 12:35:30 2002
@@ -7,10 +7,7 @@
 
 mainmenu_name "Linux Kernel Configuration"
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Machine selection'
@@ -306,8 +303,6 @@
 define_bool CONFIG_BINFMT_ELF y
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
-bool 'Networking support' CONFIG_NET
-
 source drivers/pci/Config.in
 
 bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
@@ -317,10 +312,6 @@
 else
    define_bool CONFIG_PCMCIA n
 fi
-
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 
 if [ "$CONFIG_DECSTATION" = "y" ]; then
     bool 'TURBOchannel support' CONFIG_TC
diff -urN linux-2.5.3-pre4/arch/mips64/Config.help linux/arch/mips64/Config.help
--- linux-2.5.3-pre4/arch/mips64/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/mips64/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,469 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_SGI_IP22
+  This are the SGI Indy, Challenge S and Indigo2, as well as certain
+  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
+  that runs on these, say Y here.
+
+CONFIG_SGI_IP27
+  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
+  workstations.  To compile a Linux kernel that runs on these, say Y
+  here.
+
+CONFIG_SGI_SN0_N_MODE
+  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
+  configured in either N-Modes which allows for more nodes or M-Mode
+  which allows for more memory.  Your system is most probably
+  running in M-Mode, so you should say N here.
+
+CONFIG_MIPS_FPU_EMULATOR
+  This option enables the MIPS software floatingpoint support.  Due to
+  the way floating point works you should always enable this option
+  unless you exactly know what you're doing.
+
+CONFIG_CPU_R4300
+  MIPS Technologies R4300-series processors.
+
+CONFIG_CPU_R4X00
+  MIPS Technologies R4000-series processors other than 4300, including
+  the 4640, 4650, and 4700.
+
+CONFIG_CPU_R5000
+  MIPS Technologies R5000-series processors other than the Nevada.
+
+CONFIG_CPU_NEVADA
+  MIPS Technologies R52x0-series ("Nevada") processors.
+
+CONFIG_CPU_R8000
+  MIPS Technologies R8000-series processors.
+
+CONFIG_CPU_R10000
+  MIPS Technologies R10000-series processors.
+
+CONFIG_DISCONTIGMEM
+  Say Y to upport efficient handling of discontiguous physical memory,
+  for architectures which are either NUMA (Non-Uniform Memory Access)
+  or have huge holes in the physical address space for other reasons.
+  See <file:Documentation/vm/numa> for more.
+
+CONFIG_MAPPED_KERNEL
+  Change the way a Linux kernel is loaded unto memory on a MIPS64
+  machine.  This is required in order to support text replication and
+  NUMA.  If you need to undersatand it, read the source code.
+
+CONFIG_REPLICATE_KTEXT
+  Say Y here to enable replicating the kernel text across multiple
+  nodes in a NUMA cluster.  This trades memory for speed.
+
+CONFIG_REPLICATE_EXHANDLERS
+  Say Y here to enable replicating the kernel exception handlers
+  across multiple nodes in a NUMA cluster. This trades memory for
+  speed.
+
+CONFIG_NUMA
+  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+  Access).  This option is for configuring high-end multiprocessor
+  server machines.  If in doubt, say N.
+
+CONFIG_MIPS_INSANE_LARGE
+  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
+  previous 64-bit processors which only supported 40 bit / 1TB. If you
+  need processes of more than 1TB virtual address space, say Y here.
+  This will result in additional memory usage, so it is not
+  recommended for normal users.
+
+CONFIG_CPU_LITTLE_ENDIAN
+  Some MIPS machines can be configured for either little or big endian
+  byte order. These modes require different kernels. Say Y if your
+  machine is little endian, N if it's a big endian machine.
+
+CONFIG_SGI_NEWPORT_CONSOLE
+  Say Y here if you want the console on the Newport aka XL graphics
+  card of your Indy.  Most people say Y here.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_FONT_8x16
+  This is the "high resolution" font for the VGA frame buffer (the one
+  provided by the VGA text console 80x25 mode.
+
+  If unsure, say Y.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_CROSSCOMPILE
+  Say Y here if you are compiling the kernel on a different
+  architecture than the one it is intended to run on.
+
+CONFIG_MIPS32_COMPAT
+  Select this option if you want Linux/MIPS 32-bit binary
+  compatibility. Since all software available for Linux/MIPS is
+  currently 32-bit you should say Y here.
+
+CONFIG_MIPS_FPE_MODULE
+  Build the floating point exception handler module. This option is
+  only useful for people working on the floating point exception
+  handler. If you don't, say N.
+
+CONFIG_REMOTE_DEBUG
+  If you say Y here, it will be possible to remotely debug the MIPS
+  kernel using gdb. This enlarges your kernel image disk size by
+  several megabytes and requires a machine with more than 16 MB,
+  better 32 MB RAM to avoid excessive linking time. This is only
+  useful for kernel hackers. If unsure, say N.
+
+CONFIG_MIPS_UNCACHED
+  If you say Y here there kernel will disable all CPU caches.  This will
+  reduce the system's performance dramatically but can help finding
+  otherwise hard to track bugs.  It can also useful if you're doing
+  hardware debugging with a logic analyzer and need to see all traffic
+  on the bus.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_BINFMT_ELF32
+  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
+  Everybody wants this; say Y.
+
diff -urN linux-2.5.3-pre4/arch/mips64/config.in linux/arch/mips64/config.in
--- linux-2.5.3-pre4/arch/mips64/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/mips64/config.in	Thu Jan 24 12:35:30 2002
@@ -4,10 +4,7 @@
 #
 mainmenu_name "Linux Kernel Configuration"
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Machine selection'
@@ -101,8 +98,6 @@
    bool 'Kernel floating-point emulation' CONFIG_MIPS_FPU_EMULATOR
 fi
 
-bool 'Networking support' CONFIG_NET
-
 source drivers/pci/Config.in
 
 bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
@@ -113,10 +108,6 @@
    define_bool CONFIG_PCMCIA n
 fi
 
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
-
 if [ "$CONFIG_ARC32" = "y" ]; then
    bool 'ARC console support' CONFIG_ARC_CONSOLE
 fi
@@ -129,14 +120,6 @@
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
 endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-   bool 'Kernel module loader' CONFIG_KMOD
-fi
 
 source drivers/pci/Config.in
 
diff -urN linux-2.5.3-pre4/arch/parisc/Config.help linux/arch/parisc/Config.help
--- linux-2.5.3-pre4/arch/parisc/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/parisc/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,556 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_PARISC
+  The PA-RISC microprocessor is a RISC chip designed by
+  Hewlett-Packard and used in their line of workstations.  The PA-RISC
+  Linux project has a home page at <www.parisc-linux.org>.
+
+CONFIG_SCSI_ZALON
+  The Zalon is an interface chip that sits between the PA-RISC
+  processor and the NCR 53c720 SCSI controller on K-series PA-RISC
+  boards (these are used, among other places, on some HP 780
+  workstations).  Say Y here to make sure it gets initialized
+  correctly before the Linux kernel tries to talk to the controller.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_SOM
+  SOM is a binary executable format inherited from HP/UX.  Say Y here
+  to be able to load and execute SOM binaries directly.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_BINFMT_JAVA
+  If you say Y here, the kernel will load and execute Java J-code
+  binaries directly.  Note: this option is obsolete and scheduled for
+  removal, use CONFIG_BINFMT_MISC instead.
+
+CONFIG_PARPORT
+  If you want to use devices connected to your machine's parallel port
+  (the connector at the computer with 25 holes), e.g. printer, ZIP
+  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+  create a mini network by connecting the parallel ports of two local
+  machines) etc., then you need to say Y here; please read
+  <file:Documentation/parport.txt> and
+  <file:drivers/parport/BUGS-parport>.
+
+  For extensive information about drivers for many devices attaching
+  to the parallel port see <http://www.torque.net/linux-pp.html> on
+  the WWW.
+
+  It is possible to share a single parallel port among several devices
+  and it is safe to compile all the corresponding drivers into the
+  kernel.  If you want to compile parallel port support as a module
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport.o.  If you have more than one parallel port and want to
+  specify which port and IRQ to be used by this driver at module load
+  time, take a look at <file:Documentation/parport.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_PC
+  You should say Y here if you have a PC-style parallel port. All IBM
+  PC compatible computers and some Alphas have PC-style parallel
+  ports.
+
+  This code is also available as a module.  If you want to compile it
+  as a module ( = code which can be inserted in and removed from the
+  running kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport_pc.o.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_PC_FIFO
+  Many parallel port chipsets provide hardware that can speed up
+  printing. Say Y here if you want to take advantage of that.
+
+  As well as actually having a FIFO, or DMA capability, the kernel
+  will need to know which IRQ the parallel port has.  By default,
+  parallel port interrupts will not be used, and so neither will the
+  FIFO.  See <file:Documentation/parport.txt> to find out how to
+  specify which IRQ/DMA to use.
+
+CONFIG_PARPORT_PC_SUPERIO
+  Saying Y here enables some probes for Super-IO chipsets in order to
+  find out things like base addresses, IRQ lines and DMA channels.  It
+  is safe to say N.
+
+CONFIG_PARPORT_OTHER
+  Say Y here if you want to be able to load driver modules to support
+  other non-standard types of parallel ports. This causes a
+  performance loss, so most people say N.
+
+CONFIG_PARPORT_1284
+  If you have a printer that supports status readback or device ID, or
+  want to use a device that uses enhanced parallel port transfer modes
+  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+  transfer modes. Also say Y if you want device ID information to
+  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+CONFIG_MODULES
+  Kernel modules are small pieces of compiled code which can be
+  inserted in or removed from the running kernel, using the programs
+  insmod and rmmod. This is described in the file
+  <file:Documentation/modules.txt>, including the fact that you have
+  to say "make modules" in order to compile the modules that you chose
+  during kernel configuration.  Modules can be device drivers, file
+  systems, binary executable formats, and so on. If you think that you
+  may want to make use of modules with this kernel in the future, then
+  say Y here.  If unsure, say Y.
+
+CONFIG_MODVERSIONS
+  Usually, modules have to be recompiled whenever you switch to a new
+  kernel.  Saying Y here makes it possible, and safe, to use the
+  same modules even after compiling a new kernel; this requires the
+  program modprobe. All the software needed for module support is in
+  the modutils package (check the file <file:Documentation/Changes>
+  for location and latest version).  NOTE: if you say Y here but don't
+  have the program genksyms (which is also contained in the above
+  mentioned modutils package), then the building of your kernel will
+  fail.  If you are going to use modules that are generated from
+  non-kernel sources, you would benefit from this option.  Otherwise
+  it's not that important.  So, N ought to be a safe bet.
+
+CONFIG_KMOD
+  Normally when you have selected some drivers and/or file systems to
+  be created as loadable modules, you also have the responsibility to
+  load the corresponding modules (using the programs insmod or
+  modprobe) before you can use them. If you say Y here however, the
+  kernel will be able to load modules for itself: when a part of the
+  kernel needs a module, it runs modprobe with the appropriate
+  arguments, thereby loading the module if it is available. (This is a
+  replacement for kerneld.) Say Y here and read about configuring it
+  in <file:Documentation/kmod.txt>.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_BLK_DEV_SD
+  If you want to use a SCSI hard disk or the SCSI or parallel port
+  version of the IOMEGA ZIP drive under Linux, say Y and read the
+  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sd_mod.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  Do not compile this driver as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI disk. In this case, do not compile the driver
+  for your SCSI host adapter (below) as a module either.
+
+CONFIG_SD_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional disks that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_CHR_DEV_ST
+  If you want to use a SCSI tape drive under Linux, say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and
+  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
+  SCSI CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called st.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_BLK_DEV_SR
+  If you want to use a SCSI CD-ROM under Linux, say Y and read the
+  SCSI-HOWTO and the CD-ROM-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  or M to "ISO 9660 CD-ROM file system support" later.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sr_mod.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_SR_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted. In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional CD-ROMs that can be loaded after
+  the first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_BLK_DEV_SR_VENDOR
+  This enables the usage of vendor specific SCSI commands. This is
+  required to support multisession CDs with old NEC/TOSHIBA cdrom
+  drives (and HP Writers). If you have such a drive and get the first
+  session only, try saying Y here; everybody else says N.
+
+CONFIG_CHR_DEV_SG
+  If you want to use SCSI scanners, synthesizers or CD-writers or just
+  about anything having "SCSI" in its name other than hard disks,
+  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+  directly, so you need some additional software which knows how to
+  talk to these devices using the SCSI protocol:
+
+  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+  writer software look at Cdrtools
+  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+  and for burning a "disk at once": CDRDAO
+  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+  For other devices, it's possible that you'll have to write the
+  driver software yourself. Please read the file
+  <file:Documentation/scsi-generic.txt> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
+  say N.
+
+CONFIG_SCSI_MULTI_LUN
+  If you have a SCSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+  can say Y here to force the SCSI driver to probe for multiple LUNs.
+  A SCSI device with multiple LUNs acts logically like multiple SCSI
+  devices. The vast majority of SCSI devices have only one LUN, and
+  so most people can say N here and should in fact do so, because it
+  is safer.
+
+CONFIG_SCSI_CONSTANTS
+  The error messages regarding your SCSI hardware will be easier to
+  understand if you say Y here; it will enlarge your kernel by about
+  12 KB. If in doubt, say Y.
+
+CONFIG_SCSI_SYM53C8XX
+  This driver supports all the features of recent 53C8XX chips (used
+  in PCI SCSI controllers), notably the hardware phase mismatch
+  feature of the SYM53C896.
+
+  Older versions of the 53C8XX chips are not supported by this
+  driver.  If your system uses either a 810 rev. < 16, a 815, or a 825
+  rev. < 16 PCI SCSI processor, you must use the generic NCR53C8XX
+  driver ("NCR53C8XX SCSI support" above) or configure both the
+  NCR53C8XX and this SYM53C8XX drivers either as module or linked to
+  the kernel image.
+
+  When both drivers are linked into the kernel, the SYM53C8XX driver
+  is called first at initialization and you can use the 'excl=ioaddr'
+  driver boot option to exclude attachment of adapters by the
+  SYM53C8XX driver.  For example, entering
+  'sym53c8xx=excl:0xb400,excl=0xc000' at the lilo prompt prevents
+  adapters at io address 0xb400 and 0xc000 from being attached by the
+  SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
+  The 'excl' option is also supported by the NCR53C8XX driver.
+
+  Please read <file:drivers/scsi/README.ncr53c8xx> for more
+  information.
+
+CONFIG_SCSI_NCR53C8XX_SYNC
+  The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
+  rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80.  The numbers
+  are respectively the maximum data transfer rates in mega-transfers
+  per second for each class.  For example, a FAST-20 Wide 16 device is
+  able to transfer data at 20 million 16 bit packets per second for a
+  total rate of 40 MB/s.
+
+  You may specify 0 if you want to only use asynchronous data
+  transfers. This is the safest and slowest option. Otherwise, specify
+  a value between 5 and 80, depending on the capability of your SCSI
+  controller.  The higher the number, the faster the data transfer.
+  Note that 80 should normally be ok since the driver decreases the
+  value automatically according to the controller's capabilities.
+
+  Your answer to this question is ignored for controllers with NVRAM,
+  since the driver will get this information from the user set-up.  It
+  also can be overridden using a boot setup option, as follows
+  (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
+  for FAST-20 synchronous data transfer (20 mega-transfers per
+  second).
+
+  The normal answer therefore is not to go with the default but to
+  select the maximum value 80 allowing the driver to use the maximum
+  value supported by each controller. If this causes problems with
+  your SCSI devices, you should come back and decrease the value.
+
+  There is no safe option other than using good cabling, right
+  terminations and SCSI conformant devices.
+
+CONFIG_SCSI_NCR53C8XX_IOMAPPED
+  If you say Y here, the driver will use normal IO, as opposed to
+  memory mapped IO. Memory mapped IO has less latency than normal IO
+  and works for most Intel-based hardware. Under Linux/Alpha only
+  normal IO is currently supported by the driver and so, this option
+  has no effect on those systems.
+
+  The normal answer therefore is N; try Y only if you encounter SCSI
+  related problems.
+
+CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+  "Tagged command queuing" is a feature of SCSI-2 which improves
+  performance: the host adapter can send several SCSI commands to a
+  device's queue even if previous commands haven't finished yet.
+  Because the device is intelligent, it can optimize its operations
+  (like head positioning) based on its own request queue. Some SCSI
+  devices don't implement this properly; if you want to disable this
+  feature, enter 0 or 1 here (it doesn't matter which).
+
+  The default value is 8 and should be supported by most hard disks.
+  This value can be overridden from the boot command line using the
+  'tags' option as follows (example):
+  'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
+  4, set queue depth to 16 for target 2 and target 3 on controller 0
+  and set queue depth to 10 for target 0 / lun 2 on controller 1.
+
+  The normal answer therefore is to go with the default 8 and to use
+  a boot command line option for devices that need to use a different
+  command queue depth.
+
+  There is no safe option other than using good SCSI devices.
+
+CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+  This option allows you to specify the maximum number of commands
+  that can be queued to any device, when tagged command queuing is
+  possible. The default value is 32. Minimum is 2, maximum is 64.
+  Modern hard disks are able to support 64 tags and even more, but
+  do not seem to be faster when more than 32 tags are being used.
+
+  So, the normal answer here is to go with the default value 32 unless
+  you are using very large hard disks with large cache (>= 1 MB) that
+  are able to take advantage of more than 32 tagged commands.
+
+  There is no safe option and the default answer is recommended.
+
+CONFIG_SCSI_NCR53C8XX_PROFILE
+  This option allows you to enable profiling information gathering.
+  These statistics are not very accurate due to the low frequency
+  of the kernel clock (100 Hz on i386) and have performance impact
+  on systems that use very fast devices.
+
+  The normal answer therefore is N.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_STI_CONSOLE
+  The STI console is the builtin display/keyboard on HP-PARISC
+  machines.  Say Y here to build support for it into your kernel.
+  The alternative is to use your primary serial port as a console.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_KWDB
+  Include in-kernel hooks for kdb, the source level debugger for the
+  PA-RISC port.
+
+CONFIG_IODC_CONSOLE
+  IODC is HP's pre-PCI standard for device identification (a la PCI
+  vendor, device IDs), detection, configuration, initialization and so
+  on.  It also can provide firmware function to do the actual IO,
+  which are slow, not really defined for runtime usage and generally
+  not desirable.
+
+  See <http://www.linuxhq.com/kernel/v2.4/doc/parisc/IODC.txt.html>
+  for the gory details.
+
+  Say Y here to enable use of the IODC firmware functions for console
+  I/O.  This is only useful on older PA-RISC workstations.  If in
+  doubt, say Y.
+
+CONFIG_IOMMU_CCIO
+  Say Y here to enable DMA management routines for the first
+  generation of PA-RISC cache-coherent machines.  Programs the
+  U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
+
+CONFIG_PCI_LBA
+  Say Y here to give the PA-RISC kernel access to PCI configuration
+  and IO-port space on PA-RISC workstations equipped with a Lower Bus
+  Adapter (LBA).  This includes A, B, C, J, L, and N-class machines
+  with 4-digit model numbers, also the A300.
+
+CONFIG_GSC_LASI
+  Say Y here to directly support the LASI controller chip found on
+  PA-RISC workstations.  Linux-oriented documentation for this chip
+  can be found at <http://www.parisc-linux.org/documentation/>.
+
+CONFIG_PARPORT_GSC
+  Say Y here to build in low-level parallel-support for PC-style
+  hardware integrated in the LASI-Controller (on the GSC Bus) for
+  HP-PARISC workstations.
+
diff -urN linux-2.5.3-pre4/arch/parisc/config.in linux/arch/parisc/config.in
--- linux-2.5.3-pre4/arch/parisc/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/parisc/config.in	Thu Jan 24 12:35:30 2002
@@ -10,10 +10,7 @@
 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General options'
@@ -60,11 +57,6 @@
 mainmenu_option next_comment
 comment 'General setup'
 
-bool 'Networking support' CONFIG_NET
-
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
diff -urN linux-2.5.3-pre4/arch/ppc/8260_io/Config.help linux/arch/ppc/8260_io/Config.help
--- linux-2.5.3-pre4/arch/ppc/8260_io/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/ppc/8260_io/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,24 @@
+CONFIG_FEC_ENET
+  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
+  the Motorola MPC8260.
+
+CONFIG_FCC1_ENET
+  Use MPC8260 fast Ethernet controller 1 to drive Ethernet (default).
+
+CONFIG_FCC2_ENET
+  Use MPC8260 fast Ethernet controller 2 to drive Ethernet.
+
+CONFIG_FCC3_ENET
+  Use MPC8260 fast Ethernet controller 3 to drive Ethernet.
+
+CONFIG_SCC_ENET
+  Enable Ethernet support via the Motorola MPC8xx serial
+  commmunications controller.
+
+CONFIG_SCC1_ENET
+  Use MPC8xx serial communications controller 1 to drive Ethernet
+  (default).
+
+CONFIG_SCC2_ENET
+  Use MPC8xx serial communications controller 2 to drive Ethernet.
+
diff -urN linux-2.5.3-pre4/arch/ppc/8xx_io/Config.help linux/arch/ppc/8xx_io/Config.help
--- linux-2.5.3-pre4/arch/ppc/8xx_io/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/ppc/8xx_io/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,62 @@
+CONFIG_USE_MDIO
+  On some boards the hardware configuration of the ethernet PHY can be
+  used without any software interaction over the MDIO interface, so
+  all MII code can be omitted. Say N here if unsure or if you don't
+  need link status reports.
+
+CONFIG_FEC_ENET
+  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
+  the Motorola MPC8260.
+
+CONFIG_SCC_ENET
+  Enable Ethernet support via the Motorola MPC8xx serial
+  commmunications controller.
+
+CONFIG_ENET_BIG_BUFFERS
+  Allocate large buffers for MPC8xx Etherenet.  Increases throughput
+  and decreases the likelihood of dropped packets, but costs memory.
+
+CONFIG_8xx_COPYBACK
+  Saying Y here will cause the cache on an MPC8xx processor to be used
+  in Copy-Back mode.  If you say N here, it is used in Writethrough
+  mode.
+
+  If in doubt, say Y here.
+
+CONFIG_8xx_CPU6
+  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
+  require workarounds for Linux (and most other OSes to work).  If you
+  get a BUG() very early in boot, this might fix the problem.  For
+  more details read the document entitled "MPC860 Family Device Errata
+  Reference" on Motorola's website.  This option also incurs a
+  performance hit.
+
+  If in doubt, say N here.
+
+CONFIG_SMC2_UART
+  If you would like to use SMC2 as a serial port, say Y here.
+
+  If in doubt, say Y here.
+
+CONFIG_CONS_SMC2
+  If you are going to have a serial console on your device and are
+  using SMC2 for your serial port, say Y here, else say N.
+
+CONFIG_ALTSMC2
+  If you have an MPC823 or MPC850 and would like to use the alternate
+  SMC2 for I/O, say Y here.
+
+  If in doubt, say N here.
+
+CONFIG_USE_SCC_IO
+  If your MPC8xx board has other SCC ports that you would like to use
+  for for a serial port, say Y here.
+
+  If in doubt, say N here.
+
+CONFIG_UCODE_PATCH
+  Motorola releases microcode updates for their 8xx CPM modules.  The
+  microcode update file has updates for IIC, SMC and USB.  Currently only
+  the USB update is available by default, if the MPC8xx USB option is
+  enabled.  If in doubt, say 'N' here.
+
diff -urN linux-2.5.3-pre4/arch/ppc/Config.help linux/arch/ppc/Config.help
--- linux-2.5.3-pre4/arch/ppc/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/ppc/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,884 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_PPC
+  The PowerPC is a very capable 32-bit RISC processor from Motorola,
+  the successor to their 68000 and 88000 series.  It powers recent
+  Macintoshes and also a widely-used series of single-board computers
+  from Motorola.  The Linux PowerPC port has a home page at
+  <http://penguinppc.org/>.
+
+CONFIG_MATH_EMULATION
+  Linux can emulate a math coprocessor (used for floating point
+  operations) if you don't have one. 486DX and Pentium processors have
+  a math coprocessor built in, 486SX and 386 do not, unless you added
+  a 487DX or 387, respectively. (The messages during boot time can
+  give you some hints here ["man dmesg"].) Everyone needs either a
+  coprocessor or this emulation.
+
+  If you don't have a math coprocessor, you need to say Y here; if you
+  say Y here even though you have a coprocessor, the coprocessor will
+  be used nevertheless. (This behavior can be changed with the kernel
+  command line option "no387", which comes handy if your coprocessor
+  is broken. Try "man bootparam" or see the documentation of your boot
+  loader (lilo or loadlin) about how to pass options to the kernel at
+  boot time.) This means that it is a good idea to say Y here if you
+  intend to use this kernel on different machines.
+
+  More information about the internals of the Linux math coprocessor
+  emulation can be found in <file:arch/i386/math-emu/README>.
+
+  If you are not sure, say Y; apart from resulting in a 66 KB bigger
+  kernel, it won't hurt.
+
+CONFIG_MAC_FLOPPY
+  If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
+  floppy controller, say Y here. Most commonly found in PowerMacs.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_HEARTBEAT
+  Use the power-on LED on your machine as a load meter.  The exact
+  behavior is platform-dependent, but normally the flash frequency is
+  a hyperbolic function of the 5-minute load average.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_PCI_QSPAN
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_IRQ_ALL_CPUS
+  This option gives the kernel permission to distribute IRQs across
+  multiple CPUs.  Saying N here will route all IRQs to the first
+  CPU. Generally SMP PowerMacs can answer Y. SMP IBM CHRP boxes or
+  Power3 boxes should say N for now.
+
+CONFIG_FB
+  The frame buffer device provides an abstraction for the graphics
+  hardware. It represents the frame buffer of some video hardware and
+  allows application software to access the graphics hardware through
+  a well-defined interface, so the software doesn't need to know
+  anything about the low-level (hardware register) stuff.
+
+  Frame buffer devices work identically across the different
+  architectures supported by Linux and make the implementation of
+  application programs easier and more portable; at this point, an X
+  server exists which uses the frame buffer device exclusively.
+  On several non-X86 architectures, the frame buffer device is the
+  only way to use the graphics hardware.
+
+  The device is accessed through special device nodes, usually located
+  in the /dev directory, i.e. /dev/fb*.
+
+  You need an utility program called fbset to make full use of frame
+  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+  and the Framebuffer-HOWTO at
+  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+  information.
+
+  Say Y here and to the driver for your graphics board below if you
+  are compiling a kernel for a non-x86 architecture.
+
+  If you are compiling for the x86 architecture, you can say Y if you
+  want to play with it, but it is not essential. Please note that
+  running graphical applications that directly touch the hardware
+  (e.g. an accelerated X server) and that are not frame buffer
+  device-aware may cause unexpected results. If unsure, say N.
+
+CONFIG_FB_COMPAT_XPMAC
+  If you use the Xpmac X server (common with mklinux), you'll need to
+  say Y here to use X. You should consider changing to XFree86 which
+  includes a server that supports the frame buffer device directly
+  (XF68_FBDev).
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_INPUT_ADBHID
+  Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
+  such as keyboards, mice, joysticks, or graphic tablets handled by
+  the input layer.  If you say Y here, make sure to say Y to the
+  corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
+  "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
+  support" (CONFIG_INPUT_EVDEV) as well.
+
+  If you say N here, you still have the option of using the old ADB
+  keyboard and mouse drivers.
+
+  If unsure, say Y.
+
+CONFIG_PREP_RESIDUAL
+  Some PReP systems have residual data passed to the kernel by the
+  firmware.  This allows detection of memory size, devices present and
+  other useful pieces of information.  Sometimes this information is
+  not present or incorrect.
+
+  Unless you expect to boot on a PReP system, there is not need to
+  select Y.
+
+CONFIG_ADB
+  Apple Desktop Bus (ADB) support is for support of devices which
+  are connected to an ADB port.  ADB devices tend to have 4 pins.
+  If you have an Apple Macintosh prior to the iMac, or a
+  "Blue and White G3", you probably want to say Y here.  Otherwise
+  say N.
+
+CONFIG_ADB_CUDA
+  This provides support for CUDA based Power Macintosh systems.  This
+  includes most OldWorld PowerMacs, the first generation iMacs, the
+  Blue&White G3 and the Yikes G4 (PCI Graphics).  All later models
+  should use CONFIG_ADB_PMU instead.
+
+  If unsure say Y.
+
+CONFIG_ADB_PMU
+  On the PowerBook 3400 and 2400, the PMU is a 6805 microprocessor
+  core whose primary function is to control battery charging and
+  system power.  The PMU also controls the ADB (Apple Desktop Bus)
+  which connects to the keyboard and mouse, as well as the
+  non-volatile RAM and the RTC (real time clock) chip.  Say Y to
+  enable support for this device; you should do so if your machine
+  is one of these PowerBooks.
+
+CONFIG_ADB_MACIO
+  Say Y here to include direct support for the ADB controller in the
+  Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
+  also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
+  OpenPIC controller and two RS422/Geoports.)
+
+CONFIG_ADB_KEYBOARD
+  This option allows you to use an ADB keyboard attached to your
+  machine. Note that this disables any other (ie. PS/2) keyboard
+  support, even if your machine is physically capable of using both at
+  the same time.
+
+  If you use an ADB keyboard (4 pin connector), say Y here.
+  If you use a PS/2 keyboard (6 pin connector), say N here.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_MAC_SERIAL
+  If you have Macintosh style serial ports (8 pin mini-DIN), say Y
+  here. If you also have regular serial ports and enable the driver
+  for them, you can't currently use the serial console feature.
+
+CONFIG_BUSMOUSE
+  Say Y here if your machine has a bus mouse as opposed to a serial
+  mouse. Most people have a regular serial MouseSystem or
+  Microsoft mouse (made by Logitech) that plugs into a COM port
+  (rectangular with 9 or 25 pins). These people say N here. 
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  This is the generic bus mouse driver code. If you have a bus mouse,
+  you will have to say Y here and also to the specific driver for your
+  mouse below.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called busmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MOUSE
+  This is for machines with a mouse which is neither a serial nor a
+  bus mouse. Examples are PS/2 mice (such as the track balls on some
+  laptops) and some digitizer pads. Most people have a regular serial
+  MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
+  COM port (rectangular with 9 or 25 pins). These people say N here.
+  If you have something else, read the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
+  information about all non-serial mice, not just bus mice.
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about non-serial mice. If unsure, say Y.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_PROC_HARDWARE
+  Say Y here to support the /proc/hardware file, which gives you
+  access to information about the machine you're running on,
+  including the model, CPU, MMU, clock speed, BogoMIPS rating,
+  and memory size.
+
+CONFIG_AMIGA
+  This option enables support for the Amiga series of computers. If
+  you plan to use this kernel on an Amiga, say Y here and browse the
+  material available in <file:Documentation/m68k>; otherwise say N.
+
+CONFIG_A2232
+  This option supports the 2232 7-port serial card shipped with the
+  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+  ports were connected with 8 pin DIN connectors on the card bracket,
+  for which 8 pin to DB25 adapters were supplied. The card also had
+  jumpers internally to toggle various pinning configurations.
+
+  This driver can be built as a module; but then "generic_serial.o"
+  will also be built as a module. This has to be loaded before
+  "ser_a2232.o". If you want to do this, answer M here and read
+  "<file:Documentation/modules.txt>".
+
+CONFIG_ZORRO
+  This enables support for the Zorro bus in the Amiga. If you have
+  expansion cards in your Amiga that conform to the Amiga
+  AutoConfig(tm) specification, say Y, otherwise N. Note that even
+  expansion cards that do not fit in the Zorro slots but fit in e.g.
+  the CPU slot may fall in this category, so you have to say Y to let
+  Linux use these.
+
+CONFIG_AMIGA_PCMCIA
+  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+  600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+CONFIG_WHIPPET_SERIAL
+  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
+  is no listing for the Whippet in their Amiga section.
+
+CONFIG_APNE
+  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+  say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called apne.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_AMIGAMOUSE
+  If you want to be able to use an Amiga mouse in Linux, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called amigamouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BOOTX_TEXT
+  Say Y here to see progress messages from the boot firmware in text
+  mode. Requires either BootX or Open Firmware.
+
+CONFIG_AMIGA_BUILTIN_SERIAL
+  If you want to use your Amiga's built-in serial port in Linux,
+  answer Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_GVPIOEXT
+  If you want to use a GVP IO-Extender serial card in Linux, say Y.
+  Otherwise, say N.
+
+CONFIG_GVPIOEXT_LP
+  Say Y to enable driving a printer from the parallel port on your
+  GVP IO-Extender card, N otherwise.
+
+CONFIG_GVPIOEXT_PLIP
+  Say Y to enable doing IP over the parallel port on your GVP
+  IO-Extender card, N otherwise.
+
+CONFIG_MULTIFACE_III_TTY
+  If you want to use a Multiface III card's serial port in Linux,
+  answer Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_8260
+  The MPC8260 CPM (Communications Processor Module) is a typical
+  embedded CPU made by Motorola.  Selecting this option means that
+  you wish to build a kernel for a machine with specifically an 8260
+  for a CPU.
+
+  If in doubt, say N.
+
+CONFIG_PPC601_SYNC_FIX
+  Some versions of the PPC601 (the first PowerPC chip) have bugs which
+  mean that extra synchronization instructions are required near
+  certain instructions, typically those that make major changes to the
+  CPU state.  These extra instructions reduce performance slightly.
+  If you say N here, these extra instructions will not be included,
+  resulting in a kernel which will run faster but may not run at all
+  on some systems with the PPC601 chip.
+
+  If in doubt, say Y here.
+
+CONFIG_ALL_PPC
+  Linux currently supports several different kinds of PowerPC-based
+  machines: Apple Power Macintoshes and clones (such as the Motorola
+  Starmax series), PReP (PowerPC Reference Platform) machines (such
+  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
+  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
+  Platform), and several embedded PowerPC systems containing 4xx, 6xx,
+  7xx, 8xx, 74xx, and 82xx processors.  Currently, the default option
+  is to build a kernel which works on the first three.
+
+  Select PowerMac/PReP/MTX/CHRP if configuring for any of the above.
+
+  Select Gemini if configuring for a Synergy Microsystems' Gemini
+  series Single Board Computer.  More information is available at:
+  <http://www.synergymicro.com/PressRel/97_10_15.html>.
+
+  Select APUS if configuring for a PowerUP Amiga.  More information is
+  available at: <http://linux-apus.sourceforge.net/>.
+
+CONFIG_ALTIVEC
+  This option enables kernel support for the Altivec extensions to the
+  PowerPC processor. The kernel currently supports saving and restoring
+  altivec registers, and turning on the 'altivec enable' bit so user
+  processes can execute altivec instructions.
+
+  This option is only usefully if you have a processor that supports
+  altivec (G4, otherwise known as 74xx series), but does not have
+  any affect on a non-altivec cpu (it does, however add code to the
+  kernel).
+
+  If in doubt, say Y here.
+
+CONFIG_TAU
+  G3 and G4 processors have an on-chip temperature sensor called the
+  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+  temperature within 2-4 degrees Celsius. This option shows the current
+  on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+  Unfortunately, on some chip revisions, this sensor is very inaccurate
+  and in some cases, does not work at all, so don't assume the cpu
+  temp is actually what /proc/cpuinfo says it is.
+
+CONFIG_TAU_INT
+  The TAU supports an interrupt driven mode which causes an interrupt
+  whenever the temperature goes out of range. This is the fastest way
+  to get notified the temp has exceeded a range. With this option off,
+  a timer is used to re-check the temperature periodically.
+
+  However, on some cpus it appears that the TAU interrupt hardware
+  is buggy and can cause a situation which would lead unexplained hard
+  lockups.
+
+  Unless you are extending the TAU driver, or enjoy kernel/hardware
+  debugging, leave this option off.
+
+CONFIG_TAU_AVERAGE
+  The TAU hardware can compare the temperature to an upper and lower bound.
+  The default behavior is to show both the upper and lower bound in
+  /proc/cpuinfo. If the range is large, the temperature is either changing
+  a lot, or the TAU hardware is broken (likely on some G4's). If the range
+  is small (around 4 degrees), the temperature is relatively stable.
+
+CONFIG_PMAC_PBOOK
+  This provides support for putting a PowerBook to sleep; it also
+  enables media bay support.  Power management works on the
+  PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3. You
+  must get the power management daemon, pmud, to make it work and you
+  must have the /dev/pmu device (see the pmud README).
+
+  Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
+
+  If you have a PowerBook, you should say Y.
+
+  You may also want to compile the dma sound driver as a module and
+  have it autoloaded. The act of removing the module shuts down the
+  sound hardware for more power savings.
+
+CONFIG_PMAC_BACKLIGHT
+  Say Y here to build in code to manage the LCD backlight on a
+  Macintosh PowerBook.  With this code, the backlight will be turned
+  on and off appropriately on power-management and lid-open/lid-closed
+  events; also, the PowerBook button device will be enabled so you can
+  change the screen brightness.
+
+CONFIG_EST8260
+  EST8260:
+    The EST8260 is a single-board computer manufactured by Wind River
+    Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
+    the MPC8260.  Wind River Systems has a website at
+    <http://www.windriver.com/>, but the EST8260 cannot be found on it
+    and has probably been discontinued or rebadged.
+
+  TQM8260:
+    MPC8260 based module, little larger than credit card,
+    up to 128 MB global + 64 MB local RAM, 32 MB Flash,
+    32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
+    2 x serial ports, ...
+      Manufacturer: TQ Components, www.tq-group.de
+      Date of Release: June 2001
+      End of Life: not yet :-)
+      URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
+
+  PM826:
+    Modular system with MPC8260 CPU
+    Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
+    Date of Release: mid 2001
+    End of life: -
+    URL: <http://www.microsys.de/html/pm826.html>
+
+  CU824:
+    VMEBus Board with PCI extension with MPC8240 CPU
+    Manufacturer: MicroSys GmbH, http://www.microsys.de/
+    Date of Release: early 2001 (?)
+    End of life: -
+    URL: <http://www.microsys.de/html/cu824.html>
+
+CONFIG_MAC_ADBKEYCODES
+  This provides support for sending raw ADB keycodes to console
+  devices.  This is the default up to 2.4.0, but in future this may be
+  phased out in favor of generic Linux keycodes.  If you say Y here,
+  you can dynamically switch via the
+      /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
+  sysctl and with the "keyboard_sends_linux_keycodes=" kernel
+  argument.
+
+  If unsure, say Y here.
+
+CONFIG_MAC_EMUMOUSEBTN
+  This provides generic support for emulating the 2nd and 3rd mouse
+  button with keypresses.  If you say Y here, the emulation is still
+  disabled by default.  The emulation is controlled by these sysctl
+  entries:
+      /proc/sys/dev/mac_hid/mouse_button_emulation
+      /proc/sys/dev/mac_hid/mouse_button2_keycode
+      /proc/sys/dev/mac_hid/mouse_button3_keycode
+
+CONFIG_PPC_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  If unsure, say Y here.
+
+CONFIG_PROC_DEVICETREE
+  This option adds a device-tree directory under /proc which contains
+  an image of the device tree that the kernel copies from Open
+  Firmware. If unsure, say Y here.
+
+CONFIG_PPC_RTAS
+  When you use this option, you will be able to use RTAS from
+  userspace.
+
+  RTAS stands for RunTime Abstraction Services and should
+  provide a portable way to access and set system information. This is
+  commonly used on RS/6000 (pSeries) computers.
+
+  You can access RTAS via the special proc file system entry rtas.
+  Don't confuse this rtas entry with the one in /proc/device-tree/rtas
+  which is readonly.
+
+  If you don't know if you can use RTAS look into
+  /proc/device-tree/rtas. If there are some entries, it is very likely
+  that you will be able to use RTAS.
+
+  You can do cool things with rtas. To print out information about
+  various sensors in the system, just do a
+
+    $ cat /proc/rtas/sensors
+
+  or if you power off your machine at night but want it running when
+  you enter your office at 7:45 am, do a
+
+    # date -d 'tomorrow 7:30' +%s > /proc/rtas/poweron
+
+  and shutdown.
+
+  If unsure, say Y.
+
+CONFIG_CMDLINE
+  On some architectures (EBSA110 and CATS), there is currently no way
+  for the boot loader to pass arguments to the kernel. For these
+  architectures, you should supply some command-line options at build
+  time by entering them here. As a minimum, you should specify the
+  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+CONFIG_KGDB
+  Include in-kernel hooks for kgdb, the Linux kernel source level
+  debugger.  This project has a web page at
+  <http://kgdb.sourceforge.net/>.
+
+CONFIG_XMON
+  Include in-kernel hooks for the xmon kernel monitor/debugger
+  supported by the PPC port.
+
diff -urN linux-2.5.3-pre4/arch/ppc/config.in linux/arch/ppc/config.in
--- linux-2.5.3-pre4/arch/ppc/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/ppc/config.in	Thu Jan 24 12:35:30 2002
@@ -10,19 +10,7 @@
 
 mainmenu_name "Linux/PowerPC Kernel Configuration"
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Platform support'
@@ -151,11 +139,6 @@
      fi
   fi
 fi
-
-bool 'Networking support' CONFIG_NET
-bool 'Sysctl support' CONFIG_SYSCTL
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
 
 # only elf supported, a.out is not -- Cort
 if [ "$CONFIG_PROC_FS" = "y" ]; then
diff -urN linux-2.5.3-pre4/arch/s390/Config.help linux/arch/s390/Config.help
--- linux-2.5.3-pre4/arch/s390/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/s390/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,171 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_MATHEMU
+  This option is required for IEEE compliant floating point arithmetic
+  on the Alpha. The only time you would ever not say Y is to say M in
+  order to debug the code. Say Y unless you know what you are doing.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_REMOTE_DEBUG
+  If you say Y here, it will be possible to remotely debug the MIPS
+  kernel using gdb. This enlarges your kernel image disk size by
+  several megabytes and requires a machine with more than 16 MB,
+  better 32 MB RAM to avoid excessive linking time. This is only
+  useful for kernel hackers. If unsure, say N.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ARCH_S390
+  Select this option, if you want to run the Kernel on one of IBM's
+  mainframes of the S/390 generation. You should have installed the
+  s390-compiler released by IBM (based on gcc-2.95.1) before.
+
+CONFIG_IPL
+  If you want to use the produced kernel to IPL directly from a
+  device, you have to merge a bootsector specific to the device
+  into the first bytes of the kernel. You will have to select the
+  IPL device.
+
+CONFIG_IPL_TAPE
+  Select this option if you want to IPL the image from a Tape.
+
+CONFIG_FAST_IRQ
+  Select this option in order to get the interrupts processed faster
+  on your S/390 or zSeries machine.  If selected, after an interrupt
+  is processed, the channel subsystem will be asked for other pending
+  interrupts which will also be processed before leaving the interrupt
+  context.  This speeds up the I/O a lot. Say "Y".
+
+CONFIG_PROCESS_DEBUG
+  Say Y to print all process fault locations to the console.  This is
+  a debugging option; you probably do not want to set it unless you
+  are an S390 port maintainer.
+
diff -urN linux-2.5.3-pre4/arch/s390/config.in linux/arch/s390/config.in
--- linux-2.5.3-pre4/arch/s390/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/s390/config.in	Thu Jan 24 12:35:30 2002
@@ -14,19 +14,7 @@
 mainmenu_name "Linux Kernel Configuration"
 define_bool CONFIG_ARCH_S390 y
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Processor type and features'
@@ -43,10 +31,6 @@
           "tape                   CONFIG_IPL_TAPE \
            vm_reader              CONFIG_IPL_VM" tape
 fi
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 define_bool CONFIG_KCORE_ELF y
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
diff -urN linux-2.5.3-pre4/arch/s390x/Config.help linux/arch/s390x/Config.help
--- linux-2.5.3-pre4/arch/s390x/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/s390x/Config.help	Thu Jan 24 12:35:30 2002
@@ -0,0 +1,176 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_REMOTE_DEBUG
+  If you say Y here, it will be possible to remotely debug the MIPS
+  kernel using gdb. This enlarges your kernel image disk size by
+  several megabytes and requires a machine with more than 16 MB,
+  better 32 MB RAM to avoid excessive linking time. This is only
+  useful for kernel hackers. If unsure, say N.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_BINFMT_ELF32
+  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
+  Everybody wants this; say Y.
+
+CONFIG_ARCH_S390
+  Select this option, if you want to run the Kernel on one of IBM's
+  mainframes of the S/390 generation. You should have installed the
+  s390-compiler released by IBM (based on gcc-2.95.1) before.
+
+CONFIG_IPL
+  If you want to use the produced kernel to IPL directly from a
+  device, you have to merge a bootsector specific to the device
+  into the first bytes of the kernel. You will have to select the
+  IPL device.
+
+CONFIG_IPL_TAPE
+  Select this option if you want to IPL the image from a Tape.
+
+CONFIG_FAST_IRQ
+  Select this option in order to get the interrupts processed faster
+  on your S/390 or zSeries machine.  If selected, after an interrupt
+  is processed, the channel subsystem will be asked for other pending
+  interrupts which will also be processed before leaving the interrupt
+  context.  This speeds up the I/O a lot. Say "Y".
+
+CONFIG_S390_SUPPORT
+  Select this option if you want to enable your system kernel to
+  handle system-calls from ELF binaries for 31 bit ESA.  This option
+  (and some other stuff like libraries and such) is needed for
+  executing 31 bit applications.  It is safe to say "Y".
+
+CONFIG_PROCESS_DEBUG
+  Say Y to print all process fault locations to the console.  This is
+  a debugging option; you probably do not want to set it unless you
+  are an S390 port maintainer.
+
diff -urN linux-2.5.3-pre4/arch/s390x/config.in linux/arch/s390x/config.in
--- linux-2.5.3-pre4/arch/s390x/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/s390x/config.in	Thu Jan 24 12:35:31 2002
@@ -14,11 +14,7 @@
 define_bool CONFIG_ARCH_S390 y
 define_bool CONFIG_ARCH_S390X y
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
+source init/Config.in
 mainmenu_option next_comment
 comment 'Processor type and features'
 bool 'Symmetric multi-processing support' CONFIG_SMP
@@ -29,15 +25,6 @@
 endmenu
 
 mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-  bool 'Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
 comment 'General setup'
 bool 'Fast IRQ handling' CONFIG_FAST_IRQ
 bool 'Builtin IPL record support' CONFIG_IPL
@@ -46,10 +33,6 @@
           "tape                   CONFIG_IPL_TAPE \
            vm_reader              CONFIG_IPL_VM" tape
 fi
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 define_bool CONFIG_KCORE_ELF y
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
diff -urN linux-2.5.3-pre4/arch/sh/Config.help linux/arch/sh/Config.help
--- linux-2.5.3-pre4/arch/sh/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/sh/Config.help	Thu Jan 24 12:35:31 2002
@@ -0,0 +1,775 @@
+CONFIG_SUPERH
+  The SuperH is a RISC processor targeted for use in embedded systems
+  and consumer electronics; it was also used in the Sega Dreamcast
+  gaming console.  The SuperH port has a home page at
+  <http://www.sh-linux.org/>.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_DISCONTIGMEM
+  Say Y to upport efficient handling of discontiguous physical memory,
+  for architectures which are either NUMA (Non-Uniform Memory Access)
+  or have huge holes in the physical address space for other reasons.
+  See <file:Documentation/vm/numa> for more.
+
+CONFIG_CPU_LITTLE_ENDIAN
+  Some MIPS machines can be configured for either little or big endian
+  byte order. These modes require different kernels. Say Y if your
+  machine is little endian, N if it's a big endian machine.
+
+CONFIG_HEARTBEAT
+  Use the power-on LED on your machine as a load meter.  The exact
+  behavior is platform-dependent, but normally the flash frequency is
+  a hyperbolic function of the 5-minute load average.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_VGA_CONSOLE
+  Saying Y here will allow you to use Linux in text mode through a
+  display that complies with the generic VGA standard. Virtually
+  everyone wants that.
+
+  The program SVGATextMode can be used to utilize SVGA video cards to
+  their full potential in text mode. Download it from
+  <ftp://ibiblio.org/pub/Linux/utils/console/>.
+
+  Say Y.
+
+CONFIG_VIDEO_SELECT
+  This enables support for text mode selection on kernel startup. If
+  you want to take advantage of some high-resolution text mode your
+  card's BIOS offers, but the traditional Linux utilities like
+  SVGATextMode don't, you can say Y here and set the mode using the
+  "vga=" option from your boot loader (lilo or loadlin) or set
+  "vga=ask" which brings up a video mode menu on kernel startup. (Try
+  "man bootparam" or see the documentation of your boot loader about
+  how to pass options to the kernel.)
+
+  Read the file <file:Documentation/svga.txt> for more information
+  about the Video mode selection support. If unsure, say N.
+
+CONFIG_MDA_CONSOLE
+  Say Y here if you have an old MDA or monochrome Hercules graphics
+  adapter in your system acting as a second head ( = video card). You
+  will then be able to use two monitors with your Linux system. Do not
+  say Y here if your MDA card is the primary card in your system; the
+  normal VGA driver will handle it.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called mdacon.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_CD_NO_IDESCSI
+  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+  here, otherwise N. Read the CD-ROM-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about these CD-ROM drives. If you are unsure what you
+  have, say Y and find out whether you have one of the following
+  drives.
+
+  For each of these drivers, a file Documentation/cdrom/{driver_name}
+  exists. Especially in cases where you do not know exactly which kind
+  of drive you have you should read there. Most of these drivers use a
+  file drivers/cdrom/{driver_name}.h where you can define your
+  interface parameters and switch some internal goodies.
+
+  All these CD-ROM drivers are also usable as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile them as module, say M instead of Y and
+  read <file:Documentation/modules.txt>.
+
+  If you want to use any of these CD-ROM drivers, you also have to
+  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+  answer will get "defaulted" for you if you enable any of the Linux
+  CD-ROM drivers).
+
+CONFIG_MEMORY_SET
+  This is an option about which you will never be asked a question.
+  Therefore, I conclude that you do not exist - go away.
+
+  There is a grue here.
+
+CONFIG_MEMORY_SIZE
+  This sets the default memory size assumed by your SH kernel. It can
+  be overridden as normal by the 'mem=' argument on the kernel command
+  line. If unsure, consult your board specifications or just leave it
+  as 0x00400000 which was the default value before this became
+  configurable.
+
+CONFIG_SH_PCIDMA_NONCOHERENT
+  Enable this option if your platform does not have a CPU cache which
+  remains coherent with PCI DMA. It is safest to say 'Y', although you
+  will see better performance if you can say 'N', because the PCI DMA
+  code will not have to flush the CPU's caches. If you have a PCI host
+  bridge integrated with your SH CPU, refer carefully to the chip specs
+  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_LP_CONSOLE
+  If you want kernel messages to be printed out as they occur, you
+  can have a console on the printer. This option adds support for
+  doing that; to actually get it to happen you need to pass the
+  option "console=lp0" to the kernel at boot time.
+
+  If the printer is out of paper (or off, or unplugged, or too
+  busy..) the kernel will stall until the printer is ready again.
+  By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
+  can make the kernel continue when this happens,
+  but it'll lose the kernel messages.
+
+  If unsure, say N.
+
+CONFIG_PPDEV
+  Saying Y to this adds support for /dev/parport device nodes.  This
+  is needed for programs that want portable access to the parallel
+  port, for instance deviceid (which displays Plug-and-Play device
+  IDs).
+
+  This is the parallel port equivalent of SCSI generic support (sg).
+  It is safe to say N to this -- it is not needed for normal printing
+  or parallel port CD-ROM/disk support.
+
+  This support is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  ppdev.o.
+
+  If unsure, say N.
+
+CONFIG_PSMOUSE
+  The PS/2 mouse connects to a special mouse port that looks much like
+  the keyboard port (small circular connector with 6 pins). This way,
+  the mouse does not use any serial ports. This port can also be used
+  for other input devices like light pens, tablets, keypads. Compaq,
+  AST and IBM all use this as their mouse port on currently shipping
+  machines. The trackballs of some laptops are PS/2 mice also. In
+  particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse.
+
+  Although PS/2 mice are not technically bus mice, they are explained
+  in detail in the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  When using a PS/2 mouse, you can get problems if you want to use the
+  mouse both on the Linux console and under X. Using the "-R" option
+  of the Linux mouse managing program gpm (available from
+  <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
+  the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
+
+CONFIG_WATCHDOG
+  If you say Y here (and to one of the following options) and create a
+  character special file /dev/watchdog with major number 10 and minor
+  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+  subsequently opening the file and then failing to write to it for
+  longer than 1 minute will result in rebooting the machine. This
+  could be useful for a networked machine that needs to come back
+  online as fast as possible after a lock-up. There's both a watchdog
+  implementation entirely in software (which can sometimes fail to
+  reboot the machine) and a driver for hardware watchdog boards, which
+  are more robust and can also keep track of the temperature inside
+  your computer. For details, read <file:Documentation/watchdog.txt>
+  in the kernel source.
+
+  The watchdog is usually used together with the watchdog daemon
+  which is available from
+  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+  also monitor NFS connections and can reboot the machine when the process
+  table is full.
+
+  If unsure, say N.
+
+CONFIG_WATCHDOG_NOWAYOUT
+  The default watchdog behaviour (which you get if you say N here) is
+  to stop the timer if the process managing it closes the file
+  /dev/watchdog. It's always remotely possible that this process might
+  get killed. If you say Y here, the watchdog cannot be stopped once
+  it has been started.
+
+CONFIG_SH_WDT
+  This driver adds watchdog support for the integrated watchdog in the
+  SuperH 3 and 4 processors. If you have one of these processors, say Y,
+  otherwise say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called shwdt.o. If you want to compile it as a module,
+  say M here and read Documentation/modules.txt.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_SH_RTC
+  Selecting this option will allow the Linux kernel to emulate
+  PC's RTC.
+
+  If unsure, say N.
+
+CONFIG_SH_DMA
+  Selecting this option will provide same API as PC's Direct Memory
+  Access Controller(8237A) for SuperH DMAC.
+
+  If unsure, say N.
+
+CONFIG_CF_AREA5
+  If your board has "Directly Connected" CompactFlash, You should
+  select the area where your CF is connected to.
+  
+  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+  - "Area6" if it is connected to Area 6 (0x18000000)
+
+  "Area6" will work for most boards. For ADX, select "Area5".
+
+CONFIG_CF_ENABLER
+  Compact Flash is a small, removable mass storage device introduced
+  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
+  compile in support for Compact Flash devices directly connected to
+  a SuperH processor.  A Compact Flash FAQ is available at
+  <http://www.compactflash.org/faqs/faq.htm>.
+
+  If your board has "Directly Connected" CompactFlash at area 5 or 6,
+  you may want to enable this option.  Then, you can use CF as
+  primary IDE drive (only tested for SanDisk).
+
+  If in doubt, select 'N'.
+
+CONFIG_CPU_SUBTYPE_SH7707
+  Select the type of SuperH processor you have. This information is
+  used for optimizing and configuration purposes.
+
+  Select SH7707 if you have a  60 Mhz SH-3 HD6417707 CPU.
+
+  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
+                if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
+
+  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+  Select SH7751 if you have a SH7751
+
+  Select ST40STB1 if you have a ST40STB1
+
+CONFIG_CPU_SUBTYPE_SH7708
+  Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
+                if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+CONFIG_CPU_SUBTYPE_SH7709
+  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
+
+CONFIG_CPU_SUBTYPE_SH7750
+  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+CONFIG_MEMORY_START
+  Computers built with Hitachi SuperH processors always
+  map the ROM starting at address zero.  But the processor
+  does not specify the range that RAM takes.  
+
+  The physical memory (RAM) start address will be automatically
+  set to 08000000, unless you selected one of the following
+  processor types: SolutionEngine, Overdrive, HP620, HP680, HP690,
+  in which case the start address will be set to 0c000000.
+
+  Tweak this only when porting to a new machine which is not already
+  known by the config system.  Changing it from the known correct
+  value on any of the known systems will only lead to disaster.
+
+CONFIG_HD64461
+  The Hitachi HD64461 provides an interface for
+  the SH7709 CPU, supporting a LCD controller,
+  CRT color controller, IrDA up to 4 Mbps, and a
+  PCMCIA controller supporting 2 slots.
+
+  More information is available at
+  <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
+
+  Say Y if you want support for the HD64461.
+  Otherwise, say N.
+
+CONFIG_HD64461_ENABLER
+  Say Y here if you want to enable PCMCIA support
+  via the HD64461 companion chip.
+  Otherwise, say N.
+
+CONFIG_HD64461_IRQ
+  The default setting of the HD64461 IRQ is 36.
+
+  Do not change this unless you know what you are doing.
+
+CONFIG_HD64465
+  The Hitachi HD64465 provides an interface for
+  the SH7750 CPU, supporting a LCD controller,
+  CRT color controller, IrDA, USB, PCMCIA,
+  keyboard controller, and a printer interface.
+
+  More information is available at
+  <http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
+
+  Say Y if you want support for the HD64465.
+  Otherwise, say N.
+
+CONFIG_HD64465_IRQ
+  The default setting of the HD64465 IRQ is 5.
+
+  Do not change this unless you know what you are doing.
+
+CONFIG_HD64465_IOBASE
+  The default setting of the HD64465 IO base address is 0xb0000000.
+
+  Do not change this unless you know what you are doing.
+
+CONFIG_SH_EARLY_PRINTK
+  Say Y here to redirect kernel printk messages to the serial port
+  used by the SH-IPL bootloader, starting very early in the boot
+  process and ending when the kernel's serial console is initialised.
+  This option is only useful porting the kernel to a new machine,
+  when the kernel may crash or hang before the serial console is
+  initialised. If unsure, say N.
+
+CONFIG_SH_SCI
+  Selecting this option will allow the Linux kernel to transfer data
+  over SCI (Serial Communication Interface) and/or SCIF (Serial
+  Communication Interface with FIFO) which are built into the Hitachi
+  SuperH processor.  The option provides 1 to 3 (depending
+  on the CPU model) standard Linux tty devices, /dev/ttySC[012]; one
+  of these is normally used as the system console.
+
+  If in doubt, press "y".
+
+CONFIG_SH_STANDARD_BIOS
+  Say Y here if your target has the gdb-sh-stub
+  package from www.m17n.org (or any conforming standard LinuxSH BIOS)
+  in FLASH or EPROM.  The kernel will use standard BIOS calls during
+  boot for various housekeeping tasks (including calls to read and
+  write characters to a system console, get a MAC address from an
+  on-board Ethernet interface, and shut down the hardware).  Note this
+  does not work with machines with an existing operating system in
+  mask ROM and no flash (WindowsCE machines fall in this category).
+  If unsure, say N.
+
diff -urN linux-2.5.3-pre4/arch/sh/config.in linux/arch/sh/config.in
--- linux-2.5.3-pre4/arch/sh/config.in	Thu Jan 10 16:23:45 2002
+++ linux/arch/sh/config.in	Thu Jan 24 12:35:31 2002
@@ -10,19 +10,7 @@
 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
 define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'Processor type and features'
@@ -143,8 +131,6 @@
 define_bool CONFIG_MCA n
 define_bool CONFIG_SBUS n
 
-bool 'Networking support' CONFIG_NET
-
 if [ "$CONFIG_SH_GENERIC" = "y" -o "$CONFIG_SH_SOLUTION_ENGINE" = "y" -o \
      "$CONFIG_SH_UNKNOWN" = "y" -o "$CONFIG_SH_CAT68701" = "y" -o \
      "$CONFIG_SH_ADX" = "y" ]; then
@@ -202,9 +188,6 @@
    define_bool CONFIG_PCMCIA n
 fi
 
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    choice 'Kernel core (/proc/kcore) format' \
 	"ELF		CONFIG_KCORE_ELF	\
diff -urN linux-2.5.3-pre4/arch/sh/kernel/entry.S linux/arch/sh/kernel/entry.S
--- linux-2.5.3-pre4/arch/sh/kernel/entry.S	Mon Oct  8 10:39:18 2001
+++ linux/arch/sh/kernel/entry.S	Thu Jan 24 12:35:31 2002
@@ -66,7 +66,6 @@
 tsk_ptrace	= 24
 
 PT_TRACESYS  = 0x00000002
-PF_USEDFPU   = 0x00100000
 
 ENOSYS = 38
 EINVAL = 22
@@ -567,12 +566,6 @@
 
 	.align 2
 restore_all:
-#if defined(__SH4__)
-	mov.l	__fpu_prepare_fd, r0
-	jsr	@r0
-	 stc	sr, r4
-#endif
-	!
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
 	mov.l	@r15+, r2
@@ -585,7 +578,7 @@
 	stc	sr, r8
 	mov.l	__blrb_flags, r9	! BL =1, RB=1
 	or	r9, r8
-	ldc	r8, sr		! here, change the register bank
+	ldc	r8, sr			! here, change the register bank
 	!
 	mov.l	@r15+, r8
 	mov.l	@r15+, r9
@@ -594,25 +587,25 @@
 	mov.l	@r15+, r12
 	mov.l	@r15+, r13
 	mov.l	@r15+, r14
-	mov.l	@r15+, k4	! original stack pointer
+	mov.l	@r15+, k4		! original stack pointer
 	ldc.l	@r15+, spc
 	lds.l	@r15+, pr
-	mov.l	@r15+, k3	! original SR
+	mov.l	@r15+, k3		! original SR
 	ldc.l	@r15+, gbr
 	lds.l	@r15+, mach
 	lds.l	@r15+, macl
-	add	#4, r15	! Skip syscall number
+	add	#4, r15			! Skip syscall number
 	!
 	! Calculate new SR value
-	mov	k3, k2	! original SR value
+	mov	k3, k2			! original SR value
 	mov.l	1f, k1
 	stc	sr, k0
-	and	k1, k0	! Get current FD-bit
+	and	k1, k0			! Get current FD-bit
 	mov.l	2f, k1
-	and	k1, k2	! Mask orignal SR value
-	or	k0, k2	! Inherit current FD-bit
+	and	k1, k2			! Mask orignal SR value
+	or	k0, k2			! Inherit current FD-bit
 	!
-	mov	k3, k0	! Calculate IMASK-bits
+	mov	k3, k0			! Calculate IMASK-bits
 	shlr2	k0
 	and	#0x3c, k0
 	cmp/eq	#0x3c, k0
@@ -620,69 +613,15 @@
 	 shll2	k0
 	mov	g_imask, k0
 	!
-7:	or	k0, k2	! Set the IMASK-bits
+7:	or	k0, k2			! Set the IMASK-bits
 	ldc	k2, ssr
 	!
-#if defined(__SH4__)
-	shll	k2
-	shll	k2
-	bf	9f		! user mode
-	/* Kernel to kernel transition */
-	mov.l	1f, k1
-	tst	k1, k3
-	bf	9f		! it hadn't FPU
-	! Kernel to kernel and FPU was used
-	! There's the case we don't get FPU now
-	stc	sr, k2
-	tst	k1, k2
-	bt	8f
-	! We need to grab FPU here
-	xor	k1, k2
-	ldc	k2, sr		! Grab FPU
-	mov.l	__init_task_flags, k1
-	mov.l	@k1, k2
-	mov.l	__PF_USEDFPU, k0
-	or	k0, k2
-	mov.l	k2, @k1		! Set init_task.flags |= PF_USEDFPU
-	!
-	! Restoring FPU...
-	!
-8:	mov.l	3f, k1
-	lds	k1, fpscr
-	fmov.s	@r15+, fr0
-	fmov.s	@r15+, fr1
-	fmov.s	@r15+, fr2
-	fmov.s	@r15+, fr3
-	fmov.s	@r15+, fr4
-	fmov.s	@r15+, fr5
-	fmov.s	@r15+, fr6
-	fmov.s	@r15+, fr7
-	fmov.s	@r15+, fr8
-	fmov.s	@r15+, fr9
-	fmov.s	@r15+, fr10
-	fmov.s	@r15+, fr11
-	fmov.s	@r15+, fr12
-	fmov.s	@r15+, fr13
-	fmov.s	@r15+, fr14
-	fmov.s	@r15+, fr15
-	lds.l	@r15+, fpscr
-	lds.l	@r15+, fpul
-9:
-#endif
 	mov	k4, r15
 	rte
 	 nop
 
 	.align	2
 __blrb_flags:	.long	0x30000000
-#if defined(__SH4__)
-__fpu_prepare_fd:
-	.long	SYMBOL_NAME(fpu_prepare_fd)
-__init_task_flags:
-	.long	SYMBOL_NAME(init_task_union)+4
-__PF_USEDFPU:
-	.long	PF_USEDFPU
-#endif
 1:	.long	0x00008000	! FD
 2:	.long	0xffff7f0f	! ~(IMASK+FD)
 3:	.long	0x00080000	! SZ=0, PR=1
@@ -732,61 +671,21 @@
 	! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
 	! save all registers onto stack.
 	!
-	stc	ssr, k0	! from kernel space?
-	shll	k0		! Check MD bit (bit30) by shifting it into the T bit
-	shll	k0
-#if defined(__SH4__)
-	bf/s	8f		! it's from user to kernel transition
-	 mov	r15, k0	! save original stack to k0
-	/* It's a kernel to kernel transition. */
-	/* Is the FPU disabled? */
-	mov.l	2f, k1
-	stc	ssr, k0
-	tst	k1, k0
-	mov.l	4f, k1
-	bf/s	9f		! FPU is not enabled, no need to save it
-	 mov	r15, k0	! save original stack to k0
-	! FPU is enabled, save it
-	! /* XXX: Need to save another bank of FPU if all FPU feature is used */
-	! /* Currently it's not the case for GCC (only udivsi3_i4, divsi3_i4) */
-	sts.l	fpul,  @-r15
-	sts.l	fpscr, @-r15
-	mov.l	6f, k1
-	lds	k1, fpscr
-	mov.l	3f, k1
-	fmov.s	fr15, @-r15
-	fmov.s	fr14, @-r15
-	fmov.s	fr13, @-r15
-	fmov.s	fr12, @-r15
-	fmov.s	fr11, @-r15
-	fmov.s	fr10, @-r15
-	fmov.s	fr9, @-r15
-	fmov.s	fr8, @-r15
-	fmov.s	fr7, @-r15
-	fmov.s	fr6, @-r15
-	fmov.s	fr5, @-r15
-	fmov.s	fr4, @-r15
-	fmov.s	fr3, @-r15
-	fmov.s	fr2, @-r15
-	fmov.s	fr1, @-r15
-	bra 9f
-	 fmov.s	fr0, @-r15
-#else
-	mov.l	3f, k1
-	bt/s	9f		! it's a kernel to kernel transition, and skip the FPU save.
-	 mov	r15, k0	! save original stack to k0 anyway
-#endif
-8:	/* User space to kernel */
+	stc	ssr, k0		! Is it from kernel space?
+	shll	k0		! Check MD bit (bit30) by shifting it into...
+	shll	k0		!       ...the T bit
+	bt/s	9f		! It's a kernel to kernel transition.
+	 mov	r15, k0		! save original stack to k0
+	/* User space to kernel */
 	mov	#0x20, k1
-	shll8	k1			! k1 <= 8192 == THREAD_SIZE
+	shll8	k1		! k1 <= 8192 == THREAD_SIZE
 	add	current, k1
 	mov	k1, r15		! change to kernel stack
 	!
-	mov.l	4f, k1			! let kernel release FPU
-9:	! Save the user registers on the stack.
-	! At this point, k1 should have been set to the new SR value
-  	mov	#-1, k4
-	mov.l	k4, @-r15		! syscall_nr (default: -1)
+9:  	mov	#-1, k4
+	mov.l	3f, k1
+	! Save the user registers on the stack.
+	mov.l	k4, @-r15	! syscall_nr (default: -1)
 	!
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
@@ -806,11 +705,11 @@
 	mov.l	r9, @-r15
 	mov.l	r8, @-r15
 	!
-	stc	sr, r8	! Back to normal register bank, and
-	or	k1, r8	! Block all interrupts, may release FPU
+	stc	sr, r8		! Back to normal register bank, and
+	or	k1, r8		! Block all interrupts
 	mov.l	5f, k1
-	and	k1, r8	! ...
-	ldc	r8, sr	! ...changed here.
+	and	k1, r8		! ...
+	ldc	r8, sr		! ...changed here.
 	!
 	mov.l	r7, @-r15
 	mov.l	r6, @-r15
@@ -831,9 +730,7 @@
 	 nop
 	.align	2
 1:	.long	SYMBOL_NAME(exception_handling_table)
-2:	.long	0x00008000	! FD=1
 3:	.long	0x000000f0	! FD=0, IMASK=15
-4:	.long	0x000080f0	! FD=1, IMASK=15
 5:	.long	0xcfffffff	! RB=0, BL=0
 6:	.long	0x00080000	! SZ=0, PR=1
 
diff -urN linux-2.5.3-pre4/arch/sh/kernel/fpu.c linux/arch/sh/kernel/fpu.c
--- linux-2.5.3-pre4/arch/sh/kernel/fpu.c	Sun Jan 28 18:56:00 2001
+++ linux/arch/sh/kernel/fpu.c	Thu Jan 24 12:35:31 2002
@@ -18,6 +18,10 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 
+/*
+ * Save FPU registers onto task structure.
+ * Assume called with FPU enabled (SR.FD=0).
+ */
 void
 save_fpu(struct task_struct *tsk)
 {
@@ -118,7 +122,8 @@
  * double precission represents signaling NANS.  
  */
 
-void fpu_init(void)
+static void
+fpu_init(void)
 {
 	asm volatile("lds	%0, fpul\n\t"
 		     "lds	%1, fpscr\n\t"
@@ -160,15 +165,125 @@
 		     : "r" (0), "r" (FPSCR_INIT));
 }
 
+/**
+ *	denormal_to_double - Given denormalized float number,
+ *	                     store double float
+ *
+ *	@fpu: Pointer to sh_fpu_hard structure
+ *	@n: Index to FP register
+ */
+static void
+denormal_to_double (struct sh_fpu_hard_struct *fpu, int n)
+{
+	unsigned long du, dl;
+	unsigned long x = fpu->fpul;
+	int exp = 1023 - 126;
+
+	if (x != 0 && (x & 0x7f800000) == 0) {
+		du = (x & 0x80000000);
+		while ((x & 0x00800000) == 0) {
+			x <<= 1;
+			exp--;
+		}
+		x &= 0x007fffff;
+		du |= (exp << 20) | (x >> 3);
+		dl = x << 29;
+
+		fpu->fp_regs[n] = du;
+		fpu->fp_regs[n+1] = dl;
+	}
+}
+
+/**
+ *	ieee_fpe_handler - Handle denormalized number exception
+ *
+ *	@regs: Pointer to register structure
+ *
+ *	Returns 1 when it's handled (should not cause exception).
+ */
+static int
+ieee_fpe_handler (struct pt_regs *regs)
+{
+	unsigned short insn = *(unsigned short *) regs->pc;
+	unsigned short finsn;
+	unsigned long nextpc;
+	int nib[4] = {
+		(insn >> 12) & 0xf,
+		(insn >> 8) & 0xf,
+		(insn >> 4) & 0xf,
+		insn & 0xf};
+
+	if (nib[0] == 0xb ||
+	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
+		regs->pr = regs->pc + 4;
+  
+	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
+		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		else
+			nextpc = regs->pc + 4;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4;
+		else
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
+		nextpc = regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
+		nextpc = regs->pc + 4 + regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (insn == 0x000b) { /* rts */
+		nextpc = regs->pr;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else {
+		nextpc = regs->pc + 2;
+		finsn = insn;
+	}
+
+	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
+		struct task_struct *tsk = current;
+
+		save_fpu(tsk);
+		if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) {
+			/* FPU error */
+			denormal_to_double (&tsk->thread.fpu.hard,
+					    (finsn >> 8) & 0xf);
+			tsk->thread.fpu.hard.fpscr &=
+				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+			grab_fpu();
+			restore_fpu(tsk);
+			tsk->flags |= PF_USEDFPU;
+		} else {
+			tsk->thread.trap_no = 11;
+			tsk->thread.error_code = 0;
+			force_sig(SIGFPE, tsk);
+		}
+
+		regs->pc = nextpc;
+		return 1;
+	}
+
+	return 0;
+}
+
 asmlinkage void
 do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7,
 	     struct pt_regs regs)
 {
 	struct task_struct *tsk = current;
 
-	regs.pc += 2;
+	if (ieee_fpe_handler (&regs))
+		return;
 
-	grab_fpu();
+	regs.pc += 2;
 	save_fpu(tsk);
 	tsk->thread.trap_no = 11;
 	tsk->thread.error_code = 0;
@@ -181,102 +296,12 @@
 {
 	struct task_struct *tsk = current;
 
-	if (!user_mode(&regs)) {
-		if (tsk != &init_task) {
-			unlazy_fpu(tsk);
-		}
-		tsk = &init_task;
-		if (tsk->flags & PF_USEDFPU) {
-			/*
-			 * This weird situation can be occurred.
-			 *
-			 * There's race condition in __cli:
-			 *
-			 *   (1) SR --> register
-			 *   (2) Set IMASK of register
-			 *   (3) SR <-- register
-			 *
-			 * Between (1) and (2), or (2) and (3) getting
-			 * interrupt, and interrupt handler (or
-			 * softirq) may use FPU.
-			 *
-			 * Then, SR.FD is overwritten by (3).
-			 *
-			 * This results init_task.PF_USEDFPU is on,
-			 * with SR.FD == 1.
-			 *
-			 */
-			release_fpu();
-			return;
-		}
-	}
-
 	grab_fpu();
-	if (tsk->used_math) {
-		/* Using the FPU again.  */
-		restore_fpu(tsk);
-	} else	{
-		/* First time FPU user.  */
-		fpu_init();
-		tsk->used_math = 1;
-	}
-	tsk->flags |= PF_USEDFPU;
-	release_fpu();
-}
-
-/*
- * Change current FD flag to set FD flag back to exception
- */
-asmlinkage void
-fpu_prepare_fd(unsigned long sr, unsigned long r5, unsigned long r6,
-	       unsigned long r7, struct pt_regs regs)
-{
-	__cli();
 	if (!user_mode(&regs)) {
-		if (init_task.flags & PF_USEDFPU)
-			grab_fpu();
-		else {
-			if (!(sr & SR_FD)) {
-				BUG();
-				release_fpu();
-			}
-		}
+		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
 		return;
 	}
 
-	if (sr & SR_FD) { /* Kernel doesn't grab FPU */
-		if (current->flags & PF_USEDFPU)
-			grab_fpu();
-		else {
-			if (init_task.flags & PF_USEDFPU) {
-				/*
-				 * This weird situation can be occurred.
-				 * See the comment in do_fpu_state_restore.
-				 */
-				grab_fpu();
-				save_fpu(&init_task);
-			}
-		}
-	} else {
-		if (init_task.flags & PF_USEDFPU)
-			save_fpu(&init_task);
-		else {
-			BUG();
-			release_fpu();
-		}
-	}
-}
-
-/* Short cut for the FPU exception */
-asmlinkage void
-enable_fpu_in_danger(void)
-{
-	struct task_struct *tsk = current;
-
-	if (tsk != &init_task)
-		unlazy_fpu(tsk);
-
-	tsk = &init_task;
 	if (tsk->used_math) {
 		/* Using the FPU again.  */
 		restore_fpu(tsk);
diff -urN linux-2.5.3-pre4/arch/sh/kernel/head.S linux/arch/sh/kernel/head.S
--- linux-2.5.3-pre4/arch/sh/kernel/head.S	Sun Jan 28 18:56:00 2001
+++ linux/arch/sh/kernel/head.S	Thu Jan 24 12:35:31 2002
@@ -50,12 +50,6 @@
 	sub	r1, r0		!
 	ldc	r0, r7_bank	! ... and init_task
 	!
-#if defined(__SH4__)
-	!                       Initialize fpu
-	mov.l   7f, r0
-	jsr     @r0
-	 nop
-#endif
 	!			Enable cache
 	mov.l	6f, r0
 	jsr	@r0
@@ -74,12 +68,9 @@
 	 nop
 
 	.balign 4
-1:	.long	0x400000F0		! MD=1, RB=0, BL=0, FD=0, IMASK=0xF
+1:	.long	0x400080F0		! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
 2:	.long	SYMBOL_NAME(stack)
 3:	.long	SYMBOL_NAME(__bss_start)
 4:	.long	SYMBOL_NAME(_end)
 5:	.long	SYMBOL_NAME(start_kernel)
 6:	.long	SYMBOL_NAME(cache_init)
-#if defined(__SH4__)
-7:	.long   SYMBOL_NAME(fpu_init)
-#endif
diff -urN linux-2.5.3-pre4/arch/sh/kernel/irq.c linux/arch/sh/kernel/irq.c
--- linux-2.5.3-pre4/arch/sh/kernel/irq.c	Wed Nov 28 13:22:26 2001
+++ linux/arch/sh/kernel/irq.c	Thu Jan 24 12:35:31 2002
@@ -22,6 +22,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp.h>
diff -urN linux-2.5.3-pre4/arch/sh/kernel/process.c linux/arch/sh/kernel/process.c
--- linux-2.5.3-pre4/arch/sh/kernel/process.c	Thu Jan 24 12:35:16 2002
+++ linux/arch/sh/kernel/process.c	Thu Jan 24 12:35:31 2002
@@ -12,7 +12,9 @@
  */
 
 #include <linux/unistd.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/a.out.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -39,9 +41,6 @@
 void cpu_idle(void *unused)
 {
 	/* endless idle loop with no priority at all */
-	init_idle();
-	current->nice = 20;
-
 	while (1) {
 		if (hlt_counter) {
 			if (need_resched())
diff -urN linux-2.5.3-pre4/arch/sh/kernel/rtc.c linux/arch/sh/kernel/rtc.c
--- linux-2.5.3-pre4/arch/sh/kernel/rtc.c	Wed Jun 27 13:55:29 2001
+++ linux/arch/sh/kernel/rtc.c	Thu Jan 24 12:35:31 2002
@@ -46,7 +46,7 @@
 	} while ((ctrl_inb(RCR1) & RCR1_CF) != 0);
 
 #if RTC_BIT_INVERTED != 0
-	/* Work around to avoid reading correct value. */
+	/* Work around to avoid reading incorrect value. */
 	if (sec128 == RTC_BIT_INVERTED) {
 		schedule_timeout(1);
 		goto again;
@@ -81,12 +81,18 @@
 		goto again;
 	}
 
+#if RTC_BIT_INVERTED != 0
+	if ((sec128 & RTC_BIT_INVERTED))
+		sec--;
+#endif
+
 	tv->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
-	tv->tv_usec = ((sec128 ^ RTC_BIT_INVERTED) * 1000000) / 128;
+	tv->tv_usec = (sec128 * 1000000) / 128;
 }
 
-static int set_rtc_time(unsigned long nowtime)
+int sh_rtc_settimeofday(const struct timeval *tv)
 {
+	unsigned long nowtime = tv->tv_sec;
 	int retval = 0;
 	int real_seconds, real_minutes, cmos_minutes;
 
@@ -122,13 +128,4 @@
 	ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start RTC */
 
 	return retval;
-}
-
-int sh_rtc_settimeofday(const struct timeval *tv)
-{
-#if RTC_BIT_INVERTED != 0
-	/* This is not accurate, but better than nothing. */
-	schedule_timeout(HZ/2);
-#endif
-	return set_rtc_time(tv->tv_sec);
 }
diff -urN linux-2.5.3-pre4/arch/sh/kernel/setup.c linux/arch/sh/kernel/setup.c
--- linux-2.5.3-pre4/arch/sh/kernel/setup.c	Tue Dec 25 15:39:20 2001
+++ linux/arch/sh/kernel/setup.c	Thu Jan 24 12:35:31 2002
@@ -142,9 +142,8 @@
 
 static kdev_t sh_console_device(struct console *c)
 {
-    	/* TODO: this is totally bogus */
-	/* return MKDEV(SCI_MAJOR, SCI_MINOR_START + c->index); */
-	return 0;
+	/* /dev/null */
+	return mk_kdev(MEM_MAJOR, 3);
 }
 
 /*
diff -urN linux-2.5.3-pre4/arch/sh/kernel/signal.c linux/arch/sh/kernel/signal.c
--- linux-2.5.3-pre4/arch/sh/kernel/signal.c	Mon Oct 15 13:36:48 2001
+++ linux/arch/sh/kernel/signal.c	Thu Jan 24 12:35:31 2002
@@ -22,6 +22,8 @@
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/personality.h>
+#include <linux/tty.h>
+
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
diff -urN linux-2.5.3-pre4/arch/sh/kernel/traps.c linux/arch/sh/kernel/traps.c
--- linux-2.5.3-pre4/arch/sh/kernel/traps.c	Tue Dec 11 10:10:18 2001
+++ linux/arch/sh/kernel/traps.c	Thu Jan 24 12:35:31 2002
@@ -300,10 +300,19 @@
 /*
  * handle an instruction that does an unaligned memory access
  * - have to be careful of branch delay-slot instructions that fault
+ *  SH3:
  *   - if the branch would be taken PC points to the branch
  *   - if the branch would not be taken, PC points to delay-slot
+ *  SH4:
+ *   - PC always points to delayed branch
  * - return 0 if handled, -EFAULT if failed (may not return if in kernel)
  */
+
+/* Macros to determine offset from current PC for branch instructions */
+/* Explicit type coercion is used to force sign extension where needed */
+#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
+#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
+
 static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
 {
 	u_int rm;
@@ -392,15 +401,27 @@
 			break;
 		case 0x0F00: /* bf/s lab */
 			ret = handle_unaligned_delayslot(regs);
-			if (ret==0)
-				regs->pc += (instruction&0x00FF)*2 + 4;
+			if (ret==0) {
+#if defined(__SH4__)
+				if ((regs->sr & 0x00000001) != 0)
+					regs->pc += 4; /* next after slot */
+				else
+#endif
+					regs->pc += SH_PC_8BIT_OFFSET(instruction);
+			}
 			break;
 		case 0x0900: /* bt   lab - no delayslot */
 			break;
 		case 0x0D00: /* bt/s lab */
 			ret = handle_unaligned_delayslot(regs);
-			if (ret==0)
-				regs->pc += (instruction&0x00FF)*2 + 4;
+			if (ret==0) {
+#if defined(__SH4__)
+				if ((regs->sr & 0x00000001) == 0)
+					regs->pc += 4; /* next after slot */
+				else
+#endif
+					regs->pc += SH_PC_8BIT_OFFSET(instruction);
+			}
 			break;
 		}
 		break;
@@ -408,14 +429,14 @@
 	case 0xA000: /* bra label */
 		ret = handle_unaligned_delayslot(regs);
 		if (ret==0)
-			regs->pc += (instruction&0x0FFF)*2 + 4;
+			regs->pc += SH_PC_12BIT_OFFSET(instruction);
 		break;
 
 	case 0xB000: /* bsr label */
 		ret = handle_unaligned_delayslot(regs);
 		if (ret==0) {
 			regs->pr = regs->pc + 4;
-			regs->pc += (instruction&0x0FFF)*2 + 4;
+			regs->pc += SH_PC_12BIT_OFFSET(instruction);
 		}
 		break;
 	}
diff -urN linux-2.5.3-pre4/arch/sh/mm/fault.c linux/arch/sh/mm/fault.c
--- linux-2.5.3-pre4/arch/sh/mm/fault.c	Thu Jan 24 12:35:16 2002
+++ linux/arch/sh/mm/fault.c	Thu Jan 24 12:35:31 2002
@@ -207,8 +207,7 @@
 out_of_memory:
 	up_read(&mm->mmap_sem);
 	if (current->pid == 1) {
-		current->policy |= SCHED_YIELD;
-		schedule();
+		yield();
 		down_read(&mm->mmap_sem);
 		goto survive;
 	}
@@ -248,6 +247,8 @@
 	if (address >= P3SEG && address < P4SEG)
 		dir = pgd_offset_k(address);
 	else if (address >= TASK_SIZE)
+		return 1;
+	else if (!current->mm)
 		return 1;
 	else
 		dir = pgd_offset(current->mm, address);
diff -urN linux-2.5.3-pre4/arch/sparc/Config.help linux/arch/sparc/Config.help
--- linux-2.5.3-pre4/arch/sparc/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/sparc/Config.help	Thu Jan 24 12:35:31 2002
@@ -0,0 +1,1136 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_SPARC32
+  SPARC is a family of RISC microprocessors designed and marketed by
+  Sun Microsystems, incorporated.  They are very widely found in Sun
+  workstations and clones. This port covers the original 32-bit SPARC;
+  it is old and stable and usually considered one of the "big three"
+  along with the Intel and Alpha ports.  The UltraLinux project
+  maintains both the SPARC32 and SPARC64 ports; its web page is
+  available at <http://www.ultralinux.org/>.
+
+CONFIG_BLK_DEV_FD
+  If you want to use the floppy disk drive(s) of your PC under Linux,
+  say Y. Information about this driver, especially important for IBM
+  Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+  That file also contains the location of the Floppy driver FAQ as
+  well as location of the fdutils package used to configure additional
+  parameters of the driver at run time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called floppy.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BLK_DEV_RAM
+  Saying Y here will allow you to use a portion of your RAM memory as
+  a block device, so that you can make file systems on it, read and
+  write to it and do all the other things that you can do with normal
+  block devices (such as hard drives). It is usually used to load and
+  store a copy of a minimal root file system off of a floppy into RAM
+  during the initial install of Linux.
+
+  Note that the kernel command line option "ramdisk=XX" is now
+  obsolete. For details, read <file:Documentation/ramdisk.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M and read <file:Documentation/modules.txt>. The module will be
+  called rd.o.
+
+  Most normal users won't need the RAM disk functionality, and can
+  thus say N here.
+
+CONFIG_BLK_DEV_RAM_SIZE
+  The default value is 4096. Only change this if you know what are
+  you doing. If you are using IBM S/390, then set this to 8192.
+
+CONFIG_BLK_DEV_INITRD
+  The initial RAM disk is a RAM disk that is loaded by the boot loader
+  (loadlin or lilo) and that is mounted as root before the normal boot
+  procedure. It is typically used to load modules needed to mount the
+  "real" root file system, etc. See <file:Documentation/initrd.txt>
+  for details.
+
+CONFIG_BLK_DEV_LOOP
+  Saying Y here will allow you to use a regular file as a block
+  device; you can then create a file system on that block device and
+  mount it just as you would mount other block devices such as hard
+  drive partitions, CD-ROM drives or floppy drives. The loop devices
+  are block special device files with major number 7 and typically
+  called /dev/loop0, /dev/loop1 etc.
+
+  This is useful if you want to check an ISO 9660 file system before
+  burning the CD, or if you want to use floppy images without first
+  writing them to floppy. Furthermore, some Linux distributions avoid
+  the need for a dedicated Linux partition by keeping their complete
+  root file system inside a DOS FAT file using this loop device
+  driver.
+
+  The loop device driver can also be used to "hide" a file system in a
+  disk partition, floppy, or regular file, either using encryption
+  (scrambling the data) or steganography (hiding the data in the low
+  bits of, say, a sound file). This is also safe if the file resides
+  on a remote file server. If you want to do this, you will first have
+  to acquire and install a kernel patch from
+  <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
+  say Y to this option.
+
+  Note that alternative ways to use encrypted file systems are
+  provided by the cfs package, which can be gotten from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
+  package, available at <http://tcfs.dia.unisa.it/>. You do not need
+  to say Y here if you want to use one of these. However, using cfs
+  requires saying Y to "NFS file system support" below while using
+  tcfs requires applying a kernel patch. An alternative steganography
+  solution is provided by StegFS, also available from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
+
+  To use the loop device, you need the losetup utility and a recent
+  version of the mount program, both contained in the util-linux
+  package. The location and current version number of util-linux is
+  contained in the file <file:Documentation/Changes>.
+
+  Note that this loop device has nothing to do with the loopback
+  device used for network connections from the machine to itself.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called loop.o.
+
+  Most users will answer N here.
+
+CONFIG_BLK_DEV_NBD
+  Saying Y here will allow your computer to be a client for network
+  block devices, i.e. it will be able to use block devices exported by
+  servers (mount file systems on them etc.). Communication between
+  client and server works over TCP/IP networking, but to the client
+  program this is hidden: it looks like a regular local file access to
+  a block device special file such as /dev/nd0.
+
+  Network block devices also allows you to run a block-device in
+  userland (making server and client physically the same computer,
+  communicating using the loopback network device).
+
+  Read <file:Documentation/nbd.txt> for more information, especially
+  about where to find the server code, which runs in user space and
+  does not need special kernel support.
+
+  Note that this has nothing to do with the network file systems NFS
+  or Coda; you can say N here even if you intend to use NFS or Coda.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called nbd.o.
+
+  If unsure, say N.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_BLK_DEV_LVM
+  This driver lets you combine several hard disks, hard disk
+  partitions, multiple devices or even loop devices (for evaluation
+  purposes) into a volume group.  Imagine a volume group as a kind of
+  virtual disk. Logical volumes, which can be thought of as virtual
+  partitions, can be created in the volume group.  You can resize
+  volume groups and logical volumes after creation time, corresponding
+  to new capacity needs.  Logical volumes are accessed as block
+  devices named /dev/VolumeGroupName/LogicalVolumeName.
+
+  For details see <file:Documentation/LVM-HOWTO>.  You will need
+  supporting user space software; location is in
+  <file:Documentation/Changes>.
+
+  If you want to compile this support as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called lvm-mod.o.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_AOUT
+  A.out (Assembler.OUTput) is a set of formats for libraries and
+  executables used in the earliest versions of UNIX. Linux used the
+  a.out formats QMAGIC and ZMAGIC until they were replaced with the
+  ELF format.
+
+  As more and more programs are converted to ELF, the use for a.out
+  will gradually diminish. If you disable this option it will reduce
+  your kernel by one page. This is not much and by itself does not
+  warrant removing support. However its removal is a good idea if you
+  wish to ensure that absolutely none of your programs will use this
+  older executable format. If you don't know what to answer at this
+  point then answer Y. If someone told you "You need a kernel with
+  QMAGIC support" then you'll have to say Y here. You may answer M to
+  compile a.out support as a module and later load the module when you
+  want to use a program or library in a.out format. The module will be
+  called binfmt_aout.o. Saying M or N here is dangerous though,
+  because some crucial programs on your system might still be in A.OUT
+  format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_BLK_DEV_SD
+  If you want to use a SCSI hard disk or the SCSI or parallel port
+  version of the IOMEGA ZIP drive under Linux, say Y and read the
+  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sd_mod.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  Do not compile this driver as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI disk. In this case, do not compile the driver
+  for your SCSI host adapter (below) as a module either.
+
+CONFIG_SD_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional disks that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_CHR_DEV_ST
+  If you want to use a SCSI tape drive under Linux, say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and
+  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
+  SCSI CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called st.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_CHR_DEV_OSST
+  The OnStream SC-x0 SCSI tape drives can not be driven by the
+  standard st driver, but instead need this special osst driver and
+  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
+  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
+  as well.  Note that there is also a second generation of OnStream
+  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
+  tapes (QIC-157) and can be driven by the standard driver st.
+  For more information, you may have a look at the SCSI-HOWTO
+  <http://www.linuxdoc.org/docs.html#howto>  and
+  <file:drivers/scsi/README.osst>  in the kernel source.
+  More info on the OnStream driver may be found on
+  <http://linux1.onstream.nl/test/>
+  Please also have a look at the standard st docu, as most of it
+  applies to osst as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called osst.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_BLK_DEV_SR
+  If you want to use a SCSI CD-ROM under Linux, say Y and read the
+  SCSI-HOWTO and the CD-ROM-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  or M to "ISO 9660 CD-ROM file system support" later.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sr_mod.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_SR_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted. In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional CD-ROMs that can be loaded after
+  the first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_BLK_DEV_SR_VENDOR
+  This enables the usage of vendor specific SCSI commands. This is
+  required to support multisession CDs with old NEC/TOSHIBA cdrom
+  drives (and HP Writers). If you have such a drive and get the first
+  session only, try saying Y here; everybody else says N.
+
+CONFIG_CHR_DEV_SG
+  If you want to use SCSI scanners, synthesizers or CD-writers or just
+  about anything having "SCSI" in its name other than hard disks,
+  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+  directly, so you need some additional software which knows how to
+  talk to these devices using the SCSI protocol:
+
+  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+  writer software look at Cdrtools
+  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+  and for burning a "disk at once": CDRDAO
+  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+  For other devices, it's possible that you'll have to write the
+  driver software yourself. Please read the file
+  <file:Documentation/scsi-generic.txt> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
+  say N.
+
+CONFIG_SCSI_MULTI_LUN
+  If you have a SCSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+  can say Y here to force the SCSI driver to probe for multiple LUNs.
+  A SCSI device with multiple LUNs acts logically like multiple SCSI
+  devices. The vast majority of SCSI devices have only one LUN, and
+  so most people can say N here and should in fact do so, because it
+  is safer.
+
+CONFIG_SCSI_CONSTANTS
+  The error messages regarding your SCSI hardware will be easier to
+  understand if you say Y here; it will enlarge your kernel by about
+  12 KB. If in doubt, say Y.
+
+CONFIG_SCSI_LOGGING
+  This turns on a logging facility that can be used to debug a number
+  of SCSI related problems.
+
+  If you say Y here, no logging output will appear by default, but you
+  can enable logging by saying Y to "/proc file system support" and
+  "Sysctl support" below and executing the command
+
+     echo "scsi log token [level]" > /proc/scsi/scsi
+
+  at boot time after the /proc file system has been mounted.
+
+  There are a number of things that can be used for 'token' (you can
+  find them in the source: <file:drivers/scsi/scsi.c>), and this
+  allows you to select the types of information you want, and the
+  level allows you to select the level of verbosity.
+
+  If you say N here, it may be harder to track down some types of SCSI
+  problems. If you say Y here your kernel will be somewhat larger, but
+  there should be no noticeable performance impact as long as you have
+  logging turned off.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_DUMMY
+  This is essentially a bit-bucket device (i.e. traffic you send to
+  this device is consigned into oblivion) with a configurable IP
+  address. It is most commonly used in order to make your currently
+  inactive SLIP address seem like a real address for local programs.
+  If you use SLIP or PPP, you might want to say Y here. Since this
+  thing often comes in handy, the default is Y. It won't enlarge your
+  kernel either. What a deal. Read about it in the Network
+  Administrator's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called dummy.o.  If you want to use more than one dummy
+  device at a time, you need to compile this driver as a module.
+  Instead of 'dummy', the devices will then be called 'dummy0',
+  'dummy1' etc.
+
+CONFIG_BONDING
+  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+  Channels together. This is called 'Etherchannel' by Cisco,
+  'Trunking' by Sun, and 'Bonding' in Linux.
+
+  If you have two Ethernet connections to some other computer, you can
+  make them behave like one double speed connection using this driver.
+  Naturally, this has to be supported at the other end as well, either
+  with a similar Bonding Linux driver, a Cisco 5500 switch or a
+  SunTrunking SunSoft driver.
+
+  This is similar to the EQL driver, but it merges Ethernet segments
+  instead of serial lines.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called bonding.o.
+
+CONFIG_SLIP
+  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+  connect to your Internet service provider or to connect to some
+  other local Unix box or if you want to configure your Linux box as a
+  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+  Internet Protocol) is a protocol used to send Internet traffic over
+  serial connections such as telephone lines or null modem cables;
+  nowadays, the protocol PPP is more commonly used for this same
+  purpose.
+
+  Normally, your access provider has to support SLIP in order for you
+  to be able to use it, but there is now a SLIP emulator called SLiRP
+  around (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection. If
+  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+  NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to
+  configure SLIP. Note that you don't need this option if you just
+  want to run term (term is a program which gives you almost full
+  Internet connectivity if you have a regular dial up shell account on
+  some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>. The module will be
+  called slip.o.
+
+CONFIG_SLIP_COMPRESSED
+  This protocol is faster than SLIP because it uses compression on the
+  TCP/IP headers (not on the data itself), but it has to be supported
+  on both ends. Ask your access provider if you are not sure and
+  answer Y, just in case. You will still be able to use plain SLIP. If
+  you plan to use SLiRP, the SLIP emulator (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection, you
+  definitely want to say Y here. The NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to configure
+  CSLIP. This won't enlarge your kernel.
+
+CONFIG_SLIP_SMART
+  Adds additional capabilities to the SLIP driver to support the
+  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+  analogue lines.
+
+CONFIG_SLIP_MODE_SLIP6
+  Just occasionally you may need to run IP over hostile serial
+  networks that don't pass all control characters or are only seven
+  bit. Saying Y here adds an extra mode you can use with SLIP:
+  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+  the serial device. Naturally, this has to be supported at the other
+  end of the link as well. It's good enough, for example, to run IP
+  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+CONFIG_PPP
+  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+  the same purpose: sending Internet traffic over telephone (and other
+  serial) lines.  Ask your access provider if they support it, because
+  otherwise you can't use it; most Internet access providers these
+  days support PPP rather than SLIP.
+
+  To use PPP, you need an additional program called pppd as described
+  in the PPP-HOWTO, available at
+  <http://www.linuxdoc.org/docs.html#howto>.  Make sure that you have
+  the version of pppd recommended in <file:Documentation/Changes>.
+  The PPP option enlarges your kernel by about 16 KB.
+
+  There are actually two versions of PPP: the traditional PPP for
+  asynchronous lines, such as regular analog phone lines, and
+  synchronous PPP which can be used over digital ISDN lines for
+  example.  If you want to use PPP over phone lines or other
+  asynchronous serial lines, you need to say Y (or M) here and also to
+  the next option, "PPP support for async serial ports".  For PPP over
+  synchronous lines, you should say Y (or M) here and to "Support
+  synchronous PPP", below.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you said Y to "Version information on all symbols" above, then
+  you cannot compile the PPP driver into the kernel; you can then only
+  compile it as a module.  The module will be called ppp_generic.o.
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_PPP_ASYNC
+  Say Y (or M) here if you want to be able to use PPP over standard
+  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+  need this option.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PPP_SYNC_TTY
+  Say Y (or M) here if you want to be able to use PPP over synchronous
+  (HDLC) tty devices, such as the SyncLink adapter. These devices
+  are often used for high-speed leased lines like T1/E1.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_PPP_DEFLATE
+  Support for the Deflate compression method for PPP, which uses the
+  Deflate algorithm (the same algorithm that gzip uses) to compress
+  each PPP packet before it is sent over the wire.  The machine at the
+  other end of the PPP link (usually your ISP) has to support the
+  Deflate compression method as well for this to be useful.  Even if
+  they don't support it, it is safe to say Y here.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_PPP_BSDCOMP
+  Support for the BSD-Compress compression method for PPP, which uses
+  the LZW compression method to compress each PPP packet before it is
+  sent over the wire. The machine at the other end of the PPP link
+  (usually your ISP) has to support the BSD-Compress compression
+  method as well for this to be useful. Even if they don't support it,
+  it is safe to say Y here.
+
+  The PPP Deflate compression method ("PPP Deflate compression",
+  above) is preferable to BSD-Compress, because it compresses better
+  and is patent-free.
+
+  Note that the BSD compression code will always be compiled as a
+  module; it is called bsd_comp.o and will show up in the directory
+  modules once you have said "make modules". If unsure, say N.
+
+CONFIG_TUN
+  TUN/TAP provides packet reception and transmission for user space
+  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+  device, which instead of receiving packets from a physical media,
+  receives them from user space program and instead of sending packets
+  via physical media writes them to the user space program.
+
+  When a program opens /dev/net/tun, driver creates and registers
+  corresponding net device tunX or tapX.  After a program closed above
+  devices, driver will automatically delete tunXX or tapXX device and
+  all routes corresponding to it.
+
+  Please read <file:Documentation/networking/tuntap.txt> for more
+  information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tun.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you don't know what to use this for, you don't need it.
+
+CONFIG_ETHERTAP
+  If you say Y here (and have said Y to "Kernel/User network link
+  driver", above) and create a character special file /dev/tap0 with
+  major number 36 and minor number 16 using mknod ("man mknod"), you
+  will be able to have a user space program read and write raw
+  Ethernet frames from/to that special file.  tap0 can be configured
+  with ifconfig and route like any other Ethernet device but it is not
+  connected to any physical LAN; everything written by the user to
+  /dev/tap0 is treated by the kernel as if it had come in from a LAN
+  to the device tap0; everything the kernel wants to send out over the
+  device tap0 can instead be read by the user from /dev/tap0: the user
+  mode program replaces the LAN that would be attached to an ordinary
+  Ethernet device. Please read the file
+  <file:Documentation/networking/ethertap.txt> for more information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ethertap.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you don't know what to use this for, you don't need it.
+
+CONFIG_MYRI_SBUS
+  This driver supports MyriCOM Sbus gigabit Ethernet cards.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called myri_sbus.o.
+
+CONFIG_VORTEX
+  This option enables driver support for a large number of 10mbps and
+  10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+
+  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+  "Tornado"   (3c905)                                  PCI
+  "Hurricane" (3c555/3cSOHO)                           PCI
+
+  If you have such a card, say Y and read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>. More
+  specific information is in
+  <file:Documentation/networking/vortex.txt> and in the comments at
+  the beginning of <file:drivers/net/3c59x.c>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_HAPPYMEAL
+  This driver supports the "hme" interface present on most Ultra
+  systems and as an option on older Sbus systems. This driver supports
+  both PCI and Sbus devices. This driver also supports the "qfe" quad
+  100baseT device available in both PCI and Sbus configurations.
+
+  This support is also available as a module called sunhme.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNLANCE
+  This driver supports the "le" interface present on all 32-bit Sparc
+  systems, on some older Ultra systems and as an Sbus option.  These
+  cards are based on the AMD Lance chipset, which is better known
+  via the NE2100 cards.
+
+  This support is also available as a module called sunlance.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNBMAC
+  This driver supports the "be" interface available as an Sbus option.
+  This is Sun's older 100baseT Ethernet device.
+
+  This support is also available as a module called sunbmac.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNQE
+  This driver supports the "qe" 10baseT Ethernet device, available as
+  an Sbus option. Note that this is not the same as Quad FastEthernet
+  "qfe" which is supported by the Happy Meal driver instead.
+
+  This support is also available as a module called sunqe.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_FDDI
+  Fiber Distributed Data Interface is a high speed local area network
+  design; essentially a replacement for high speed Ethernet. FDDI can
+  run over copper or fiber. If you are connected to such a network and
+  want a driver for the FDDI card in your computer, say Y here (and
+  then also Y to the driver for your FDDI card, below). Most people
+  will say N.
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_BUSMOUSE
+  Say Y here if your machine has a bus mouse as opposed to a serial
+  mouse. Most people have a regular serial MouseSystem or
+  Microsoft mouse (made by Logitech) that plugs into a COM port
+  (rectangular with 9 or 25 pins). These people say N here. 
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  This is the generic bus mouse driver code. If you have a bus mouse,
+  you will have to say Y here and also to the specific driver for your
+  mouse below.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called busmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOFT_WATCHDOG
+  A software monitoring watchdog. This will fail to reboot your system
+  from some situations that the hardware watchdog will recover
+  from. Equally it's a lot cheaper to install.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called
+   softdog.o.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_SUN4
+  Say Y here if, and only if, your machine is a Sun4. Note that
+  a kernel compiled with this option will run only on Sun4.
+  (And the current version will probably work only on sun4/330.)
+
+CONFIG_SCSI_SUNESP
+  This is the driver for the Sun ESP SCSI host adapter. The ESP
+  chipset is present in most SPARC SBUS-based computers.
+
+  This support is also available as a module called esp.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGICPTI
+  This driver supports SBUS SCSI controllers from PTI or QLogic. These
+  controllers are known under Solaris as qpti and in the openprom as
+  PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
+  driven by a different driver.
+
+  This support is also available as a module called qlogicpti.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_PROM_CONSOLE
+  Say Y to build a console driver for Sun machines that uses the
+  terminal emulation built into their console PROMS.
+
+CONFIG_SUN_OPENPROMFS
+  If you say Y, the OpenPROM device tree will be available as a
+  virtual file system, which you can mount to /proc/openprom by "mount
+  -t openpromfs none /proc/openprom".
+
+  If you want to compile the /proc/openprom support as a module ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called openpromfs.o.  If unsure, say M.
+
+CONFIG_SUNOS_EMUL
+  This allows you to run most SunOS binaries.  If you want to do this,
+  say Y here and place appropriate files in /usr/gnemul/sunos. See
+  <http://www.ultralinux.org/faq.html> for more information.  If you
+  want to run SunOS binaries on an Ultra you must also say Y to
+  "Kernel support for 32-bit a.out binaries" above.
+
+CONFIG_SUN_KEYBOARD
+  Say Y here to support the keyboard found on Sun 3 and 3x
+  workstations.  It can also be used support Sun Type-5 keyboards
+  through an adaptor.  See
+  <http://www.suse.cz/development/input/adapters.html> and
+  <http://sourceforge.net/projects/linuxconsole/> for details on the
+  latter.
+
diff -urN linux-2.5.3-pre4/arch/sparc/config.in linux/arch/sparc/config.in
--- linux-2.5.3-pre4/arch/sparc/config.in	Thu Jan 24 12:35:16 2002
+++ linux/arch/sparc/config.in	Thu Jan 24 12:35:31 2002
@@ -7,19 +7,7 @@
 define_bool CONFIG_UID16 y
 define_bool CONFIG_HIGHMEM y
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General setup'
@@ -60,10 +48,6 @@
 fi
 
 tristate 'Openprom tree appears in /proc/openprom' CONFIG_SUN_OPENPROMFS
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    define_bool CONFIG_KCORE_ELF y
 fi
diff -urN linux-2.5.3-pre4/arch/sparc64/Config.help linux/arch/sparc64/Config.help
--- linux-2.5.3-pre4/arch/sparc64/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/arch/sparc64/Config.help	Thu Jan 24 12:35:31 2002
@@ -0,0 +1,1316 @@
+CONFIG_SMP
+  This enables support for systems with more than one CPU. If you have
+  a system with only one CPU, like most personal computers, say N. If
+  you have a system with more than one CPU, say Y.
+
+  If you say N here, the kernel will run on single and multiprocessor
+  machines, but will use only one CPU of a multiprocessor machine. If
+  you say Y here, the kernel will run on many, but not all,
+  singleprocessor machines. On a singleprocessor machine, the kernel
+  will run faster if you say N here.
+
+  Note that if you say Y here and choose architecture "586" or
+  "Pentium" under "Processor family", the kernel will not work on 486
+  architectures. Similarly, multiprocessor kernels for the "PPro"
+  architecture may not work on all Pentium based boards.
+
+  People using multiprocessor machines who say Y here should also say
+  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+  Management" code will be disabled if you say Y here.
+
+  See also the <file:Documentation/smp.tex>,
+  <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you don't know what to do here, say N.
+
+CONFIG_SPARC64
+  SPARC is a family of RISC microprocessors designed and marketed by
+  Sun Microsystems, incorporated.  This port covers the newer 64-bit
+  UltraSPARC.  The UltraLinux project maintains both the SPARC32 and
+  SPARC64 ports; its web page is available at
+  <http://www.ultralinux.org/>.
+
+CONFIG_BLK_DEV_FD
+  If you want to use the floppy disk drive(s) of your PC under Linux,
+  say Y. Information about this driver, especially important for IBM
+  Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+  That file also contains the location of the Floppy driver FAQ as
+  well as location of the fdutils package used to configure additional
+  parameters of the driver at run time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called floppy.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BLK_DEV_RAM
+  Saying Y here will allow you to use a portion of your RAM memory as
+  a block device, so that you can make file systems on it, read and
+  write to it and do all the other things that you can do with normal
+  block devices (such as hard drives). It is usually used to load and
+  store a copy of a minimal root file system off of a floppy into RAM
+  during the initial install of Linux.
+
+  Note that the kernel command line option "ramdisk=XX" is now
+  obsolete. For details, read <file:Documentation/ramdisk.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M and read <file:Documentation/modules.txt>. The module will be
+  called rd.o.
+
+  Most normal users won't need the RAM disk functionality, and can
+  thus say N here.
+
+CONFIG_BLK_DEV_RAM_SIZE
+  The default value is 4096. Only change this if you know what are
+  you doing. If you are using IBM S/390, then set this to 8192.
+
+CONFIG_BLK_DEV_INITRD
+  The initial RAM disk is a RAM disk that is loaded by the boot loader
+  (loadlin or lilo) and that is mounted as root before the normal boot
+  procedure. It is typically used to load modules needed to mount the
+  "real" root file system, etc. See <file:Documentation/initrd.txt>
+  for details.
+
+CONFIG_BLK_DEV_LOOP
+  Saying Y here will allow you to use a regular file as a block
+  device; you can then create a file system on that block device and
+  mount it just as you would mount other block devices such as hard
+  drive partitions, CD-ROM drives or floppy drives. The loop devices
+  are block special device files with major number 7 and typically
+  called /dev/loop0, /dev/loop1 etc.
+
+  This is useful if you want to check an ISO 9660 file system before
+  burning the CD, or if you want to use floppy images without first
+  writing them to floppy. Furthermore, some Linux distributions avoid
+  the need for a dedicated Linux partition by keeping their complete
+  root file system inside a DOS FAT file using this loop device
+  driver.
+
+  The loop device driver can also be used to "hide" a file system in a
+  disk partition, floppy, or regular file, either using encryption
+  (scrambling the data) or steganography (hiding the data in the low
+  bits of, say, a sound file). This is also safe if the file resides
+  on a remote file server. If you want to do this, you will first have
+  to acquire and install a kernel patch from
+  <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
+  say Y to this option.
+
+  Note that alternative ways to use encrypted file systems are
+  provided by the cfs package, which can be gotten from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
+  package, available at <http://tcfs.dia.unisa.it/>. You do not need
+  to say Y here if you want to use one of these. However, using cfs
+  requires saying Y to "NFS file system support" below while using
+  tcfs requires applying a kernel patch. An alternative steganography
+  solution is provided by StegFS, also available from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
+
+  To use the loop device, you need the losetup utility and a recent
+  version of the mount program, both contained in the util-linux
+  package. The location and current version number of util-linux is
+  contained in the file <file:Documentation/Changes>.
+
+  Note that this loop device has nothing to do with the loopback
+  device used for network connections from the machine to itself.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called loop.o.
+
+  Most users will answer N here.
+
+CONFIG_BLK_DEV_NBD
+  Saying Y here will allow your computer to be a client for network
+  block devices, i.e. it will be able to use block devices exported by
+  servers (mount file systems on them etc.). Communication between
+  client and server works over TCP/IP networking, but to the client
+  program this is hidden: it looks like a regular local file access to
+  a block device special file such as /dev/nd0.
+
+  Network block devices also allows you to run a block-device in
+  userland (making server and client physically the same computer,
+  communicating using the loopback network device).
+
+  Read <file:Documentation/nbd.txt> for more information, especially
+  about where to find the server code, which runs in user space and
+  does not need special kernel support.
+
+  Note that this has nothing to do with the network file systems NFS
+  or Coda; you can say N here even if you intend to use NFS or Coda.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called nbd.o.
+
+  If unsure, say N.
+
+CONFIG_IDE
+  If you say Y here, your kernel will be able to manage low cost mass
+  storage units such as ATA/(E)IDE and ATAPI units. The most common
+  cases are IDE hard drives and ATAPI CD-ROM drives.
+
+  If your system is pure SCSI and doesn't use these interfaces, you
+  can say N here.
+
+  Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+  for mass storage units such as hard disks. It was designed by
+  Western Digital and Compaq Computer in 1984. It was then named
+  ST506. Quite a number of disks use the IDE interface.
+
+  AT Attachment (ATA) is the superset of the IDE specifications.
+  ST506 was also called ATA-1.
+
+  Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+  ATA-3. It provides support for larger disks (up to 8.4GB by means of
+  the LBA standard), more disks (4 instead of 2) and for other mass
+  storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+  ATA-4 and provides faster (and more CPU friendly) transfer modes
+  than previous PIO (Programmed processor Input/Output) from previous
+  ATA/IDE standards by means of fast DMA controllers.
+
+  ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+  CD-ROM drives, similar in many respects to the SCSI protocol.
+
+  SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+  designed in order to prevent data corruption and disk crash by
+  detecting pre hardware failure conditions (heat, access time, and
+  the like...). Disks built since June 1995 may follow this standard.
+  The kernel itself don't manage this; however there are quite a
+  number of user programs such as smart that can query the status of
+  SMART parameters disk.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called ide.o.
+
+  For further information, please read <file:Documentation/ide.txt>.
+
+  If unsure, say Y.
+
+CONFIG_ISA
+  Find out whether you have ISA slots on your motherboard.  ISA is the
+  name of a bus system, i.e. the way the CPU talks to the other stuff
+  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+CONFIG_PCI
+  Find out whether you have a PCI motherboard. PCI is the name of a
+  bus system, i.e. the way the CPU talks to the other stuff inside
+  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+  VESA. If you have PCI, say Y, otherwise N.
+
+  The PCI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information about which PCI hardware does work under Linux and which
+  doesn't.
+
+CONFIG_MCA
+  MicroChannel Architecture is found in some IBM PS/2 machines and
+  laptops.  It is a bus system similar to PCI or ISA. See
+  <file:Documentation/mca.txt> (and especially the web page given
+  there) before attempting to build an MCA bus kernel.
+
+CONFIG_EISA
+  The Extended Industry Standard Architecture (EISA) bus was
+  developed as an open alternative to the IBM MicroChannel bus.
+
+  The EISA bus provided some of the features of the IBM MicroChannel
+  bus while maintaining backward compatibility with cards made for
+  the older ISA bus.  The EISA bus saw limited use between 1988 and
+  1995 when it was made obsolete by the PCI bus.
+
+  Say Y here if you are building a kernel for an EISA-based machine.
+
+  Otherwise, say N.
+
+CONFIG_ISAPNP
+  Say Y here if you would like support for ISA Plug and Play devices.
+  Some information is in <file:Documentation/isapnp.txt>.
+
+  This support is also available as a module called isapnp.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_KCORE_ELF
+  If you enabled support for /proc file system then the file
+  /proc/kcore will contain the kernel core image. This can be used
+  in gdb:
+
+  $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+  You have two choices here: ELF and A.OUT. Selecting ELF will make
+  /proc/kcore appear in ELF core format as defined by the Executable
+  and Linking Format specification. Selecting A.OUT will choose the
+  old "a.out" format which may be necessary for some old versions
+  of binutils or on some architectures.
+
+  This is especially useful if you have compiled the kernel with the
+  "-g" option to preserve debugging information. It is mainly used
+  for examining kernel data structures on the live kernel so if you
+  don't understand what this means or are not a kernel hacker, just
+  leave it at its default value ELF.
+
+CONFIG_BINFMT_ELF
+  ELF (Executable and Linkable Format) is a format for libraries and
+  executables used across different architectures and operating
+  systems. Saying Y here will enable your kernel to run ELF binaries
+  and enlarge it by about 13 KB. ELF support under Linux has now all
+  but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
+  because it is portable (this does *not* mean that you will be able
+  to run executables from different architectures or operating systems
+  however) and makes building run-time libraries very easy. Many new
+  executables are distributed solely in ELF format. You definitely
+  want to say Y here.
+
+  Information about ELF is contained in the ELF HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you find that after upgrading from Linux kernel 1.2 and saying Y
+  here, you still can't run any ELF binaries (they just crash), then
+  you'll have to install the newest ELF runtime libraries, including
+  ld.so (check the file <file:Documentation/Changes> for location and
+  latest version).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called binfmt_elf.o. Saying M or N here is dangerous because
+  some crucial programs on your system might be in ELF format.
+
+CONFIG_BINFMT_MISC
+  If you say Y here, it will be possible to plug wrapper-driven binary
+  formats into the kernel. You will like this especially when you use
+  programs that need an interpreter to run like Java, Python or
+  Emacs-Lisp. It's also useful if you often run DOS executables under
+  the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>). Once you have
+  registered such a binary class with the kernel, you can start one of
+  those programs simply by typing in its name at a shell prompt; Linux
+  will automatically feed it to the correct interpreter.
+
+  You can do other nice things, too. Read the file
+  <file:Documentation/binfmt_misc.txt> to learn how to use this
+  feature, and <file:Documentation/java.txt> for information about how
+  to include Java support.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this part of the kernel.
+
+  You may say M here for module support and later load the module when
+  you have use for it; the module is called binfmt_misc.o. If you
+  don't know what to answer at this point, say Y.
+
+CONFIG_SOLARIS_EMUL
+  This is experimental code which will enable you to run (many)
+  Solaris binaries on your SPARC Linux machine.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called solaris.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ENVCTRL
+  Kernel support for temperature and fan monitoring on Sun SME
+  machines.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called envctrl.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI
+  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
+  any other SCSI device under Linux, say Y and make sure that you know
+  the name of your SCSI host adapter (the card inside your computer
+  that "speaks" the SCSI protocol, also called SCSI controller),
+  because you will be asked for it.
+
+  You also need to say Y here if you want support for the parallel
+  port version of the 100 MB IOMEGA ZIP drive.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scsi_mod.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  However, do not compile this as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI device.
+
+CONFIG_BLK_DEV_SD
+  If you want to use a SCSI hard disk or the SCSI or parallel port
+  version of the IOMEGA ZIP drive under Linux, say Y and read the
+  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sd_mod.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  Do not compile this driver as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI disk. In this case, do not compile the driver
+  for your SCSI host adapter (below) as a module either.
+
+CONFIG_SD_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional disks that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_CHR_DEV_ST
+  If you want to use a SCSI tape drive under Linux, say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and
+  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
+  SCSI CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called st.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_CHR_DEV_OSST
+  The OnStream SC-x0 SCSI tape drives can not be driven by the
+  standard st driver, but instead need this special osst driver and
+  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
+  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
+  as well.  Note that there is also a second generation of OnStream
+  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
+  tapes (QIC-157) and can be driven by the standard driver st.
+  For more information, you may have a look at the SCSI-HOWTO
+  <http://www.linuxdoc.org/docs.html#howto>  and
+  <file:drivers/scsi/README.osst>  in the kernel source.
+  More info on the OnStream driver may be found on
+  <http://linux1.onstream.nl/test/>
+  Please also have a look at the standard st docu, as most of it
+  applies to osst as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called osst.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_BLK_DEV_SR
+  If you want to use a SCSI CD-ROM under Linux, say Y and read the
+  SCSI-HOWTO and the CD-ROM-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  or M to "ISO 9660 CD-ROM file system support" later.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sr_mod.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_SR_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted. In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional CD-ROMs that can be loaded after
+  the first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_BLK_DEV_SR_VENDOR
+  This enables the usage of vendor specific SCSI commands. This is
+  required to support multisession CDs with old NEC/TOSHIBA cdrom
+  drives (and HP Writers). If you have such a drive and get the first
+  session only, try saying Y here; everybody else says N.
+
+CONFIG_CHR_DEV_SG
+  If you want to use SCSI scanners, synthesizers or CD-writers or just
+  about anything having "SCSI" in its name other than hard disks,
+  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+  directly, so you need some additional software which knows how to
+  talk to these devices using the SCSI protocol:
+
+  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+  writer software look at Cdrtools
+  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+  and for burning a "disk at once": CDRDAO
+  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+  For other devices, it's possible that you'll have to write the
+  driver software yourself. Please read the file
+  <file:Documentation/scsi-generic.txt> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
+  say N.
+
+CONFIG_SCSI_MULTI_LUN
+  If you have a SCSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+  can say Y here to force the SCSI driver to probe for multiple LUNs.
+  A SCSI device with multiple LUNs acts logically like multiple SCSI
+  devices. The vast majority of SCSI devices have only one LUN, and
+  so most people can say N here and should in fact do so, because it
+  is safer.
+
+CONFIG_SCSI_CONSTANTS
+  The error messages regarding your SCSI hardware will be easier to
+  understand if you say Y here; it will enlarge your kernel by about
+  12 KB. If in doubt, say Y.
+
+CONFIG_SCSI_LOGGING
+  This turns on a logging facility that can be used to debug a number
+  of SCSI related problems.
+
+  If you say Y here, no logging output will appear by default, but you
+  can enable logging by saying Y to "/proc file system support" and
+  "Sysctl support" below and executing the command
+
+     echo "scsi log token [level]" > /proc/scsi/scsi
+
+  at boot time after the /proc file system has been mounted.
+
+  There are a number of things that can be used for 'token' (you can
+  find them in the source: <file:drivers/scsi/scsi.c>), and this
+  allows you to select the types of information you want, and the
+  level allows you to select the level of verbosity.
+
+  If you say N here, it may be harder to track down some types of SCSI
+  problems. If you say Y here your kernel will be somewhat larger, but
+  there should be no noticeable performance impact as long as you have
+  logging turned off.
+
+CONFIG_SCSI_AIC7XXX_OLD
+  WARNING This driver is an older aic7xxx driver and is no longer
+  under active development.  Adaptec, Inc. is writing a new driver to
+  take the place of this one, and it is recommended that whenever
+  possible, people should use the new Adaptec written driver instead
+  of this one.  This driver will eventually be phased out entirely.
+
+  This is support for the various aic7xxx based Adaptec SCSI
+  controllers. These include the 274x EISA cards; 284x VLB cards;
+  2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+  motherboard based SCSI controllers from Adaptec. It does not support
+  the AAA-13x RAID controllers from Adaptec, nor will it likely ever
+  support them. It does not support the 2920 cards from Adaptec that
+  use the Future Domain SCSI controller chip. For those cards, you
+  need the "Future Domain 16xx SCSI support" driver.
+
+  In general, if the controller is based on an Adaptec SCSI controller
+  chip from the aic777x series or the aic78xx series, this driver
+  should work. The only exception is the 7810 which is specifically
+  not supported (that's the RAID controller chip on the AAA-13x
+  cards).
+
+  Note that the AHA2920 SCSI host adapter is *not* supported by this
+  driver; choose "Future Domain 16xx SCSI support" instead if you have
+  one of those.
+
+  Information on the configuration options for this controller can be
+  found by checking the help file for each of the available
+  configuration options. You should read
+  <file:drivers/scsi/aic7xxx_old/README.aic7xxx> at a minimum before
+  contacting the maintainer with any questions.  The SCSI-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>, can also
+  be of great help.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called aic7xxx_old.o.
+
+CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT
+  This option causes the aic7xxx driver to attempt to use Tagged
+  Command Queueing (TCQ) on all devices that claim to support it.
+
+  TCQ is a feature of SCSI-2 which improves performance: the host
+  adapter can send several SCSI commands to a device's queue even if
+  previous commands haven't finished yet.  Because the device is
+  intelligent, it can optimize its operations (like head positioning)
+  based on its own request queue.  Not all devices implement this
+  correctly.
+
+  If you say Y here, you can still turn off TCQ on troublesome devices
+  with the use of the tag_info boot parameter.  See the file
+  <file:drivers/scsi/README.aic7xxx> for more information on that and
+  other aic7xxx setup commands.  If this option is turned off, you may
+  still enable TCQ on known good devices by use of the tag_info boot
+  parameter.
+
+  If you are unsure about your devices then it is safest to say N
+  here.
+
+  However, TCQ can increase performance on some hard drives by as much
+  as 50% or more, so it is recommended that if you say N here, you
+  should at least read the <file:drivers/scsi/README.aic7xxx> file so
+  you will know how to enable this option manually should your drives
+  prove to be safe in regards to TCQ.
+
+  Conversely, certain drives are known to lock up or cause bus resets
+  when TCQ is enabled on them.  If you have a Western Digital
+  Enterprise SCSI drive for instance, then don't even bother to enable
+  TCQ on it as the drive will become unreliable, and it will actually
+  reduce performance.
+
+CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE
+  Specify the number of commands you would like to allocate per SCSI
+  device when Tagged Command Queueing (TCQ) is enabled on that device.
+
+  Reasonable figures are in the range of 8 to 24 commands per device,
+  but depending on hardware could be increased or decreased from that
+  figure. If the number is too high for any particular device, the
+  driver will automatically compensate usually after only 10 minutes
+  of uptime. It will not hinder performance if some of your devices
+  eventually have their command depth reduced, but is a waste of
+  memory if all of your devices end up reducing this number down to a
+  more reasonable figure.
+
+  NOTE: Certain very broken drives are known to lock up when given
+  more commands than they like to deal with. Quantum Fireball drives
+  are the most common in this category. For the Quantum Fireball
+  drives it is suggested to use no more than 8 commands per device.
+
+  Default: 8
+
+CONFIG_AIC7XXX_OLD_PROC_STATS
+  This option tells the driver to keep track of how many commands have
+  been sent to each particular device and report that information to
+  the user via the /proc/scsi/aic7xxx/n file, where n is the number of
+  the aic7xxx controller you want the information on. This adds a
+  small amount of overhead to each and every SCSI command the aic7xxx
+  driver handles, so if you aren't really interested in this
+  information, it is best to leave it disabled. This will only work if
+  you also say Y to "/proc file system support", below.
+
+  If unsure, say N.
+
+CONFIG_SCSI_SYM53C8XX_2
+  This driver supports the whole NCR53C8XX/SYM53C8XX family of 
+  PCI-SCSI controllers. It also supports the subset of LSI53C10XX 
+  Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 
+  language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 
+  controllers.
+
+  If your system has problems using this new major version of the
+  SYM53C8XX driver, you may switch back to driver version 1.
+
+  Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
+  information.
+
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
+  This option only applies to PCI-SCSI chip that are PCI DAC capable 
+  (875A, 895A, 896, 1010-33, 1010-66, 1000).
+
+  When set to 0, only PCI 32 bit DMA addressing (SAC) will be performed.
+  When set to 1, 40 bit DMA addressing (with upper 24 bits of address 
+  set to zero) is supported. The addressable range is here 1 TB.
+  When set to 2, full 64 bits of address for DMA are supported, but only
+  16 segments of 4 GB can be addressed. The addressable range is so 
+  limited to 64 GB.
+
+  The safest value is 0 (32 bit DMA addressing) that is guessed to still 
+  fit most of real machines.
+
+  The preferred value 1 (40 bit DMA addressing) should make happy 
+  properly engineered PCI DAC capable host bridges. You may configure
+  this option for Intel platforms with more than 4 GB of memory.
+
+  The still experimental value 2 (64 bit DMA addressing with 16 x 4GB 
+  segments limitation) can be used on systems that require PCI address 
+  bits past bit 39 to be set for the addressing of memory using PCI 
+  DAC cycles.
+
+CONFIG_SCSI_SYM53C8XX_IOMAPPED
+  If you say Y here, the driver will preferently use normal IO rather than 
+  memory mapped IO.
+
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS
+  This option allows you to specify the maximum number of commands
+  that can be queued to any device, when tagged command queuing is
+  possible. The driver supports up to 256 queued commands per device.
+  This value is used as a compiled-in hard limit.
+
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
+  This is the default value of the command queue depth the driver will 
+  announce to the generic SCSI layer for devices that support tagged 
+  command queueing. This value can be changed from the boot command line.
+  This is a soft limit that cannot exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
+
+CONFIG_SCSI_NCR53C8XX
+  This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
+  of PCI-SCSI controllers.  This driver supports parity checking,
+  tagged command queuing and fast synchronous data transfers up to 80
+  MB/s with wide FAST-40 LVD devices and controllers.
+
+  Recent versions of the 53C8XX chips are better supported by the
+  option "SYM53C8XX SCSI support", below.
+
+  Note: there is yet another driver for the 53c8xx family of
+  controllers ("NCR53c7,8xx SCSI support" above).  If you want to use
+  them both, you need to say M to both and build them as modules, but
+  only one may be active at a time.  If you have a 53c8xx board, you
+  probably do not want to use the "NCR53c7,8xx SCSI support".
+
+  Please read <file:drivers/scsi/README.ncr53c8xx> for more
+  information.
+
+CONFIG_SCSI_SYM53C8XX
+  This driver supports all the features of recent 53C8XX chips (used
+  in PCI SCSI controllers), notably the hardware phase mismatch
+  feature of the SYM53C896.
+
+  Older versions of the 53C8XX chips are not supported by this
+  driver.  If your system uses either a 810 rev. < 16, a 815, or a 825
+  rev. < 16 PCI SCSI processor, you must use the generic NCR53C8XX
+  driver ("NCR53C8XX SCSI support" above) or configure both the
+  NCR53C8XX and this SYM53C8XX drivers either as module or linked to
+  the kernel image.
+
+  When both drivers are linked into the kernel, the SYM53C8XX driver
+  is called first at initialization and you can use the 'excl=ioaddr'
+  driver boot option to exclude attachment of adapters by the
+  SYM53C8XX driver.  For example, entering
+  'sym53c8xx=excl:0xb400,excl=0xc000' at the lilo prompt prevents
+  adapters at io address 0xb400 and 0xc000 from being attached by the
+  SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
+  The 'excl' option is also supported by the NCR53C8XX driver.
+
+  Please read <file:drivers/scsi/README.ncr53c8xx> for more
+  information.
+
+CONFIG_SCSI_NCR53C8XX_SYNC
+  The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
+  rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80.  The numbers
+  are respectively the maximum data transfer rates in mega-transfers
+  per second for each class.  For example, a FAST-20 Wide 16 device is
+  able to transfer data at 20 million 16 bit packets per second for a
+  total rate of 40 MB/s.
+
+  You may specify 0 if you want to only use asynchronous data
+  transfers. This is the safest and slowest option. Otherwise, specify
+  a value between 5 and 80, depending on the capability of your SCSI
+  controller.  The higher the number, the faster the data transfer.
+  Note that 80 should normally be ok since the driver decreases the
+  value automatically according to the controller's capabilities.
+
+  Your answer to this question is ignored for controllers with NVRAM,
+  since the driver will get this information from the user set-up.  It
+  also can be overridden using a boot setup option, as follows
+  (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
+  for FAST-20 synchronous data transfer (20 mega-transfers per
+  second).
+
+  The normal answer therefore is not to go with the default but to
+  select the maximum value 80 allowing the driver to use the maximum
+  value supported by each controller. If this causes problems with
+  your SCSI devices, you should come back and decrease the value.
+
+  There is no safe option other than using good cabling, right
+  terminations and SCSI conformant devices.
+
+CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+  This option is only provided for safety if you suspect some SCSI
+  device of yours to not support properly the target-disconnect
+  feature. In that case, you would say Y here. In general however, to
+  not allow targets to disconnect is not reasonable if there is more
+  than 1 device on a SCSI bus. The normal answer therefore is N.
+
+CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+  "Tagged command queuing" is a feature of SCSI-2 which improves
+  performance: the host adapter can send several SCSI commands to a
+  device's queue even if previous commands haven't finished yet.
+  Because the device is intelligent, it can optimize its operations
+  (like head positioning) based on its own request queue. Some SCSI
+  devices don't implement this properly; if you want to disable this
+  feature, enter 0 or 1 here (it doesn't matter which).
+
+  The default value is 8 and should be supported by most hard disks.
+  This value can be overridden from the boot command line using the
+  'tags' option as follows (example):
+  'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
+  4, set queue depth to 16 for target 2 and target 3 on controller 0
+  and set queue depth to 10 for target 0 / lun 2 on controller 1.
+
+  The normal answer therefore is to go with the default 8 and to use
+  a boot command line option for devices that need to use a different
+  command queue depth.
+
+  There is no safe option other than using good SCSI devices.
+
+CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+  This option allows you to specify the maximum number of commands
+  that can be queued to any device, when tagged command queuing is
+  possible. The default value is 32. Minimum is 2, maximum is 64.
+  Modern hard disks are able to support 64 tags and even more, but
+  do not seem to be faster when more than 32 tags are being used.
+
+  So, the normal answer here is to go with the default value 32 unless
+  you are using very large hard disks with large cache (>= 1 MB) that
+  are able to take advantage of more than 32 tagged commands.
+
+  There is no safe option and the default answer is recommended.
+
+CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
+  This option allows you to enable some features depending on GPIO
+  wiring. These General Purpose Input/Output pins can be used for
+  vendor specific features or implementation of the standard SYMBIOS
+  features. Genuine SYMBIOS controllers use GPIO0 in output for
+  controller LED and GPIO3 bit as a flag indicating
+  singled-ended/differential interface. The Tekram DC-390U/F boards
+  uses a different GPIO wiring.
+
+  Your answer to this question is ignored if all your controllers have
+  NVRAM, since the driver is able to detect the board type from the
+  NVRAM format.
+
+  If all the controllers in your system are genuine SYMBIOS boards or
+  use BIOS and drivers from SYMBIOS, you would want to say Y here,
+  otherwise N. N is the safe answer.
+
+CONFIG_SCSI_NCR53C8XX_PROFILE
+  This option allows you to enable profiling information gathering.
+  These statistics are not very accurate due to the low frequency
+  of the kernel clock (100 Hz on i386) and have performance impact
+  on systems that use very fast devices.
+
+  The normal answer therefore is N.
+
+CONFIG_SCSI_NCR53C8XX_PQS_PDS
+  Say Y here if you have a special SCSI adapter produced by NCR
+  corporation called a PCI Quad SCSI or PCI Dual SCSI. You do not need
+  this if you do not have one of these adapters. However, since this
+  device is detected as a specific PCI device, this option is quite
+  safe.
+
+  The common answer here is N, but answering Y is safe.
+
+CONFIG_SCSI_QLOGIC_ISP
+  This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
+  IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
+  card is supported by the "AM53/79C974 PCI SCSI" driver.)
+
+  If you say Y here, make sure to choose "BIOS" at the question "PCI
+  access mode".
+
+  Please read the file <file:drivers/scsi/README.qlogicisp>.  You
+  should also read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qlogicisp.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGIC_FC
+  This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qlogicfc.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_BBC_I2C
+  The BBC devices on the UltraSPARC III have two I2C controllers.  The
+  first I2C controller connects mainly to configuration PROMs (NVRAM,
+  CPU configuration, DIMM types, etc.).  The second I2C controller
+  connects to environmental control devices such as fans and
+  temperature sensors.  The second controller also connects to the
+  smartcard reader, if present.  Say Y to enable support for these.
+
+CONFIG_BUSMOUSE
+  Say Y here if your machine has a bus mouse as opposed to a serial
+  mouse. Most people have a regular serial MouseSystem or
+  Microsoft mouse (made by Logitech) that plugs into a COM port
+  (rectangular with 9 or 25 pins). These people say N here. 
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  This is the generic bus mouse driver code. If you have a bus mouse,
+  you will have to say Y here and also to the specific driver for your
+  mouse below.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called busmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_DRM
+  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+  introduced in XFree86 4.0. If you say Y here, you need to select
+  the module that's right for your graphics card from the list below.
+  These modules provide support for synchronization, security, and
+  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+  details.  You should also select and configure AGP
+  (/dev/agpgart) support.
+
+CONFIG_DRM_TDFX
+  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+  graphics card.  If M is selected, the module will be called tdfx.o.
+
+CONFIG_DRM_R128
+  Choose this option if you have an ATI Rage 128 graphics card.  If M
+  is selected, the module will be called r128.o.  AGP support for
+  this card is strongly suggested (unless you have a PCI version).
+
+CONFIG_DRM_FFB
+  Choose this option if you have one of Sun's Creator3D-based graphics
+  and frame buffer cards.  Product page at
+  <http://www.sun.com/desktop/products/Graphics/creator3d.html>.
+
+CONFIG_SOFT_WATCHDOG
+  A software monitoring watchdog. This will fail to reboot your system
+  from some situations that the hardware watchdog will recover
+  from. Equally it's a lot cheaper to install.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called
+   softdog.o.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
+CONFIG_MAGIC_SYSRQ
+  If you say Y here, you will have some control over the system even
+  if the system crashes for example during kernel debugging (e.g., you
+  will be able to flush the buffer cache to disk, reboot the system
+  immediately or dump some status information). This is accomplished
+  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+  also works on a serial console (on PC hardware at least), if you
+  send a BREAK and then within 5 seconds a command keypress. The
+  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+  unless you really know what this hack does.
+
+CONFIG_SCSI_SUNESP
+  This is the driver for the Sun ESP SCSI host adapter. The ESP
+  chipset is present in most SPARC SBUS-based computers.
+
+  This support is also available as a module called esp.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGICPTI
+  This driver supports SBUS SCSI controllers from PTI or QLogic. These
+  controllers are known under Solaris as qpti and in the openprom as
+  PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
+  driven by a different driver.
+
+  This support is also available as a module called qlogicpti.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_PROM_CONSOLE
+  Say Y to build a console driver for Sun machines that uses the
+  terminal emulation built into their console PROMS.
+
+CONFIG_SUN_OPENPROMFS
+  If you say Y, the OpenPROM device tree will be available as a
+  virtual file system, which you can mount to /proc/openprom by "mount
+  -t openpromfs none /proc/openprom".
+
+  If you want to compile the /proc/openprom support as a module ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called openpromfs.o.  If unsure, say M.
+
+CONFIG_SPARC32_COMPAT
+  This allows you to run 32-bit binaries on your Ultra.
+  Everybody wants this; say Y.
+
+CONFIG_BINFMT_ELF32
+  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
+  Everybody wants this; say Y.
+
+CONFIG_BINFMT_AOUT32
+  This allows you to run 32-bit a.out format binaries on your Ultra.
+  If you want to run SunOS binaries (see SunOS binary emulation below)
+  or other a.out binaries, say Y. If unsure, say N.
+
+CONFIG_SUNOS_EMUL
+  This allows you to run most SunOS binaries.  If you want to do this,
+  say Y here and place appropriate files in /usr/gnemul/sunos. See
+  <http://www.ultralinux.org/faq.html> for more information.  If you
+  want to run SunOS binaries on an Ultra you must also say Y to
+  "Kernel support for 32-bit a.out binaries" above.
+
+CONFIG_SUN_KEYBOARD
+  Say Y here to support the keyboard found on Sun 3 and 3x
+  workstations.  It can also be used support Sun Type-5 keyboards
+  through an adaptor.  See
+  <http://www.suse.cz/development/input/adapters.html> and
+  <http://sourceforge.net/projects/linuxconsole/> for details on the
+  latter.
+
+CONFIG_VIDEO_DEV
+  Support for audio/video capture and overlay devices and FM radio
+  cards. The exact capabilities of each device vary. User tools for
+  this are available from
+  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+  If you are interested in writing a driver for such an audio/video
+  device or user software interacting with such a driver, please read
+  the file <file:Documentation/video4linux/API.html>.
+
+  This driver is also available as a module called videodev.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_BT848
+  Support for BT848 based frame grabber/overlay boards. This includes
+  the Miro, Hauppauge and STB boards. Please read the material in
+  <file:Documentation/video4linux/bttv> for more information.
+
+  If you say Y or M here, you need to say Y or M to "I2C support" and
+  "I2C bit-banging interfaces" in the character device section.
+
+  This driver is available as a module called bttv.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_DISPLAY7SEG
+  This is the driver for the 7-segment display and LED present on
+  Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called display7seg.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  If you do not have a CompactPCI model CP1400 or CP1500, or
+  another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
+  you should say N to this option.
+
+CONFIG_WATCHDOG_RIO
+  Say Y here to support the hardware watchdog capability on Sun RIO
+  machines.  The watchdog timeout period is normally one minute but
+  can be changed with a boot-time parameter.
+
+CONFIG_WATCHDOG_CP1XXX
+  This is the driver for the hardware watchdog timers present on
+  Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cpwatchdog.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  If you do not have a CompactPCI model CP1400 or CP1500, or
+  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+  you should say N to this option.
+
+CONFIG_DEBUG_KERNEL
+  Say Y here if you are developing drivers or trying to debug and
+  identify kernel problems.
+
+CONFIG_DEBUG_SLAB
+  Say Y here to have the kernel do limited verification on memory
+  allocation as well as poisoning memory on free to catch use of freed
+  memory.
+
+CONFIG_DEBUG_SPINLOCK
+  Say Y here and build SMP to catch missing spinlock initialization
+  and certain other kinds of spinlock errors commonly made.  This is
+  best used in conjunction with the NMI watchdog so that spinlock
+  deadlocks are also debuggable.
+
+CONFIG_DEBUG_BUGVERBOSE
+  Say Y here to make BUG() panics output the file name and line number
+  of the BUG call as well as the EIP and oops trace.  This aids
+  debugging but costs about 70-100K of memory.
+
diff -urN linux-2.5.3-pre4/arch/sparc64/config.in linux/arch/sparc64/config.in
--- linux-2.5.3-pre4/arch/sparc64/config.in	Thu Jan 24 12:35:16 2002
+++ linux/arch/sparc64/config.in	Thu Jan 24 12:35:31 2002
@@ -4,19 +4,7 @@
 #
 mainmenu_name "Linux/UltraSPARC Kernel Configuration"
 
-mainmenu_option next_comment
-comment 'Code maturity level options'
-bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
-endmenu
-
-mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
-   bool '  Kernel module loader' CONFIG_KMOD
-fi
-endmenu
+source init/Config.in
 
 mainmenu_option next_comment
 comment 'General setup'
@@ -60,10 +48,6 @@
 source drivers/pci/Config.in
 
 tristate 'Openprom tree appears in /proc/openprom' CONFIG_SUN_OPENPROMFS
-bool 'Networking support' CONFIG_NET
-bool 'System V IPC' CONFIG_SYSVIPC
-bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
-bool 'Sysctl support' CONFIG_SYSCTL
 if [ "$CONFIG_PROC_FS" = "y" ]; then
    define_bool CONFIG_KCORE_ELF y
 fi
diff -urN linux-2.5.3-pre4/drivers/acorn/block/Config.help linux/drivers/acorn/block/Config.help
--- linux-2.5.3-pre4/drivers/acorn/block/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/acorn/block/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,18 @@
+CONFIG_BLK_DEV_MFM
+  Support the MFM hard drives on the Acorn Archimedes both
+  on-board the A4x0 motherboards and via the Acorn MFM podules.
+  Drives up to 64MB are supported. If you haven't got one of these
+  machines or drives just say N.
+
+CONFIG_BLK_DEV_FD1772
+  Support the floppy drive on the Acorn Archimedes (A300, A4x0, A540,
+  R140 and R260) series of computers; it supports only 720K floppies
+  at the moment. If you don't have one of these machines just answer
+  N.
+
+CONFIG_BLK_DEV_MFM_AUTODETECT
+  If you answer Y, the MFM code will attempt to automatically detect
+  the cylinders/heads/sectors count on your hard drive. WARNING: This
+  sometimes doesn't work and it also does some dodgy stuff which
+  potentially might damage your drive.
+
diff -urN linux-2.5.3-pre4/drivers/acorn/net/Config.help linux/drivers/acorn/net/Config.help
--- linux-2.5.3-pre4/drivers/acorn/net/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/acorn/net/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,12 @@
+CONFIG_ARM_ETHER1
+  If you have an Acorn system with one of these (AKA25) network cards,
+  you should say Y to this option if you wish to use it with Linux.
+
+CONFIG_ARM_ETHER3
+  If you have an Acorn system with one of these network cards, you
+  should say Y to this option if you wish to use it with Linux.
+
+CONFIG_ARM_ETHERH
+  If you have an Acorn system with one of these network cards, you
+  should say Y to this option if you wish to use it with Linux.
+
diff -urN linux-2.5.3-pre4/drivers/acorn/scsi/Config.help linux/drivers/acorn/scsi/Config.help
--- linux-2.5.3-pre4/drivers/acorn/scsi/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/acorn/scsi/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,53 @@
+CONFIG_SCSI_ACORNSCSI_3
+  This enables support for the Acorn SCSI card (aka30). If you have an
+  Acorn system with one of these, say Y. If unsure, say N.
+
+CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
+  Say Y here to enable tagged queuing support on the Acorn SCSI card.
+
+  This is a feature of SCSI-2 which improves performance: the host
+  adapter can send several SCSI commands to a device's queue even if
+  previous commands haven't finished yet. Some SCSI devices don't
+  implement this properly, so the safe answer is N.
+
+CONFIG_SCSI_ACORNSCSI_SYNC
+  Say Y here to enable synchronous transfer negotiation with all
+  targets on the Acorn SCSI card.
+
+  In general, this improves performance; however some SCSI devices
+  don't implement it properly, so the safe answer is N.
+
+CONFIG_SCSI_ARXESCSI
+  Around 1991, Arxe Systems Limited released a high density floppy
+  disc interface for the Acorn Archimedes range, to allow the use of
+  HD discs from the then new A5000 on earlier models. This interface
+  was either sold on its own or with an integral SCSI controller.
+  Technical details on this NCR53c94-based device are available at
+  <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html>
+  Say Y here to compile in support for the SCSI controller.
+
+CONFIG_SCSI_OAK1
+  This enables support for the Oak SCSI card. If you have an Acorn
+  system with one of these, say Y. If unsure, say N.
+
+CONFIG_SCSI_CUMANA_1
+  This enables support for the Cumana SCSI I card. If you have an
+  Acorn system with one of these, say Y. If unsure, say N.
+
+CONFIG_SCSI_CUMANA_2
+  This enables support for the Cumana SCSI II card. If you have an
+  Acorn system with one of these, say Y. If unsure, say N.
+
+CONFIG_SCSI_ECOSCSI
+  This enables support for the EcoSCSI card -- a small card that sits
+  in the Econet socket. If you have an Acorn system with one of these,
+  say Y. If unsure, say N.
+
+CONFIG_SCSI_EESOXSCSI
+  This enables support for the EESOX SCSI card. If you have an Acorn
+  system with one of these, say Y, otherwise say N.
+
+CONFIG_SCSI_POWERTECSCSI
+  This enables support for the Powertec SCSI card on Acorn systems. If
+  you have one of these, say Y. If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/acpi/Config.help linux/drivers/acpi/Config.help
--- linux-2.5.3-pre4/drivers/acpi/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/acpi/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,44 @@
+CONFIG_ACPI_DEBUG
+  The ACPI driver can optionally report errors with a great deal
+  of verbosity. Saying Y enables these statements. This will increase
+  your kernel size by around 50K.
+
+CONFIG_ACPI_BUSMGR
+  The ACPI Bus Manager enumerates devices in the ACPI namespace, and
+  handles PnP messages.  All ACPI devices use its services, so using
+  them requires saying Y here.
+
+CONFIG_ACPI_SYS
+  This driver will enable your system to shut down using ACPI, and
+  dump your ACPI DSDT table using /proc/acpi/dsdt.
+
+CONFIG_ACPI_CPU
+  This driver installs ACPI as the idle handler for Linux, and uses
+  ACPI C2 and C3 processor states to save power, on systems that
+  support it.
+
+CONFIG_ACPI_BUTTON
+  This driver registers for events based on buttons, such as the
+  power, sleep, and lid switch.  In the future, a daemon will read
+  /proc/acpi/event and perform user-defined actions such as shutting
+  down the system.  Until then, you can cat it, and see output when
+  a button is pressed.
+
+CONFIG_ACPI_AC
+  This driver adds support for the AC Adapter object, which indicates
+  whether a system is on AC, or not.  Typically, only laptops have
+  this object, since desktops are always on AC.
+
+CONFIG_ACPI_EC
+  This driver is required on some systems for the proper operation of
+  the battery and thermal drivers.  If you are compiling for a laptop,
+  say Y.
+
+CONFIG_ACPI_CMBATT
+  This driver adds support for battery information through
+  /proc/acpi/battery. If you have a laptop with a battery, say Y.
+
+CONFIG_ACPI_THERMAL
+  This driver handles overheating conditions on laptops. It is HIGHLY
+  recommended, as your laptop CPU may be damaged without it.
+
diff -urN linux-2.5.3-pre4/drivers/atm/Config.help linux/drivers/atm/Config.help
--- linux-2.5.3-pre4/drivers/atm/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/atm/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,296 @@
+CONFIG_ATM_TCP
+  ATM over TCP driver. Useful mainly for development and for
+  experiments. If unsure, say N.
+
+CONFIG_ATM_ENI
+  Driver for the Efficient Networks ENI155p series and SMC ATM
+  Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
+  2MB on-board RAM (Efficient calls them "C" and "S", respectively),
+  and the FPGA and the ASIC Tonga versions of the board are supported.
+  The driver works with MMF (-MF or ...F) and UTP-5 (-U5 or ...D)
+  adapters.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called eni.o.
+
+CONFIG_ATM_ENI_DEBUG
+  Extended debugging records various events and displays that list
+  when an inconsistency is detected. This mechanism is faster than
+  generally using printks, but still has some impact on performance.
+  Note that extended debugging may create certain race conditions
+  itself. Enable this ONLY if you suspect problems with the driver.
+
+CONFIG_ATM_ENI_TUNE_BURST
+  In order to obtain good throughput, the ENI NIC can transfer
+  multiple words of data per PCI bus access cycle. Such a multi-word
+  transfer is called a burst.
+
+  The default settings for the burst sizes are suitable for most PCI
+  chipsets. However, in some cases, large bursts may overrun buffers
+  in the PCI chipset and cause data corruption. In such cases, large
+  bursts must be disabled and only (slower) small bursts can be used.
+  The burst sizes can be set independently in the send (TX) and
+  receive (RX) direction.
+
+  Note that enabling many different burst sizes in the same direction
+  may increase the cost of setting up a transfer such that the
+  resulting throughput is lower than when using only the largest
+  available burst size.
+
+  Also, sometimes larger bursts lead to lower throughput, e.g. on an
+  Intel 440FX board, a drop from 135 Mbps to 103 Mbps was observed
+  when going from 8W to 16W bursts.
+
+CONFIG_ATM_ENI_BURST_TX_16W
+  Burst sixteen words at once in the send direction. This may work
+  with recent PCI chipsets, but is known to fail with older chipsets.
+
+CONFIG_ATM_ENI_BURST_TX_8W
+  Burst eight words at once in the send direction. This is the default
+  setting.
+
+CONFIG_ATM_ENI_BURST_TX_4W
+  Burst four words at once in the send direction. You may want to try
+  this if you have disabled 8W bursts. Enabling 4W if 8W is also set
+  may or may not improve throughput.
+
+CONFIG_ATM_ENI_BURST_TX_2W
+  Burst two words at once in the send direction. You may want to try
+  this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or 8W
+  are also set may or may not improve throughput.
+
+CONFIG_ATM_ENI_BURST_RX_16W
+  Burst sixteen words at once in the receive direction. This may work
+  with recent PCI chipsets, but is known to fail with older chipsets.
+
+CONFIG_ATM_ENI_BURST_RX_8W
+  Burst eight words at once in the receive direction. This may work
+  with recent PCI chipsets, but is known to fail with older chipsets,
+  such as the Intel Neptune series.
+
+CONFIG_ATM_ENI_BURST_RX_4W
+  Burst four words at once in the receive direction. This is the
+  default setting. Enabling 4W if 8W is also set may or may not
+  improve throughput.
+
+CONFIG_ATM_ENI_BURST_RX_2W
+  Burst two words at once in the receive direction. You may want to
+  try this if you have disabled 4W and 8W bursts. Enabling 2W if 4W or
+  8W are also set may or may not improve throughput.
+
+CONFIG_ATM_ZATM
+  Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
+  adapters.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called zatm.o.
+
+CONFIG_ATM_ZATM_DEBUG
+  Extended debugging records various events and displays that list
+  when an inconsistency is detected. This mechanism is faster than
+  generally using printks, but still has some impact on performance.
+  Note that extended debugging may create certain race conditions
+  itself. Enable this ONLY if you suspect problems with the driver.
+
+CONFIG_ATM_FIRESTREAM
+  Driver for the Fujitsu FireStream 155 (MB86697) and
+  FireStream 50 (MB86695) ATM PCI chips.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  firestream.o.
+
+CONFIG_ATM_ZATM_EXACT_TS
+  The uPD98401 SAR chip supports a high-resolution timer (approx. 30
+  MHz) that is used for very accurate reception timestamps. Because
+  that timer overflows after 140 seconds, and also to avoid timer
+  drift, time measurements need to be periodically synchronized with
+  the normal system time. Enabling this feature will add some general
+  overhead for timer synchronization and also per-packet overhead for
+  time conversion.
+
+CONFIG_ATM_NICSTAR
+  The NICStAR chipset family is used in a large number of ATM NICs for
+  25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
+  series. Say Y if you have one of those.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called
+  nicstar.o.
+
+CONFIG_ATM_NICSTAR_USE_SUNI
+  Support for the S-UNI and compatible PHYsical layer chips. These are
+  found in most 155Mbps NICStAR based ATM cards, namely in the
+  ForeRunner LE155 cards. This driver provides detection of cable~
+  removal and reinsertion and provides some statistics. This driver
+  doesn't have removal capability when compiled as a module, so if you
+  need that capability don't include S-UNI support (it's not needed to
+  make the card work).
+
+CONFIG_ATM_NICSTAR_USE_IDT77105
+  Support for the PHYsical layer chip in ForeRunner LE25 cards. In
+  addition to cable removal/reinsertion detection, this driver allows
+  you to control the loopback mode of the chip via a dedicated IOCTL.
+  This driver is required for proper handling of temporary carrier
+  loss, so if you have a 25Mbps NICStAR based ATM card you must say Y.
+
+CONFIG_ATM_IDT77252
+  Driver for the IDT 77252 ATM PCI chips.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called idt77252.o
+
+CONFIG_ATM_IDT77252_DEBUG
+  Somewhat useful debugging messages are available. The choice of
+  messages is controlled by a bitmap.  This may be specified as a
+  module argument.  See the file <file:drivers/atm/idt77252.h> for
+  the meanings of the bits in the mask.
+
+  When active, these messages can have a significant impact on the
+  speed of the driver, and the size of your syslog files! When
+  inactive, they will have only a modest impact on performance.
+
+CONFIG_ATM_IDT77252_RCV_ALL
+  Enable receiving of all cells on the ATM link, that do not match
+  an open connection in the raw cell queue of the driver.  Useful
+  for debugging or special applications only, so the safe answer is N.
+
+CONFIG_ATM_AMBASSADOR
+  This is a driver for ATMizer based ATM card produced by Madge
+  Networks Ltd. Say Y (or M to compile as a module named ambassador.o)
+  here if you have one of these cards.
+
+CONFIG_ATM_AMBASSADOR_DEBUG
+  Somewhat useful debugging messages are available. The choice of
+  messages is controlled by a bitmap.  This may be specified as a
+  module argument (kernel command line argument as well?), changed
+  dynamically using an ioctl (not yet) or changed by sending the
+  string "Dxxxx" to VCI 1023 (where x is a hex digit).  See the file
+  <file:drivers/atm/ambassador.h> for the meanings of the bits in the
+  mask.
+
+  When active, these messages can have a significant impact on the
+  speed of the driver, and the size of your syslog files! When
+  inactive, they will have only a modest impact on performance.
+
+CONFIG_ATM_HORIZON
+  This is a driver for the Horizon chipset ATM adapter cards once
+  produced by Madge Networks Ltd. Say Y (or M to compile as a module
+  named horizon.o) here if you have one of these cards.
+
+CONFIG_ATM_HORIZON_DEBUG
+  Somewhat useful debugging messages are available. The choice of
+  messages is controlled by a bitmap.  This may be specified as a
+  module argument (kernel command line argument as well?), changed
+  dynamically using an ioctl (not yet) or changed by sending the
+  string "Dxxxx" to VCI 1023 (where x is a hex digit).  See the file
+  <file:drivers/atm/horizon.h> for the meanings of the bits in the
+  mask.
+
+  When active, these messages can have a significant impact on the
+  speed of the driver, and the size of your syslog files! When
+  inactive, they will have only a modest impact on performance.
+
+CONFIG_ATM_IA
+  This is a driver for the Interphase (i)ChipSAR adapter cards
+  which include a variety of variants in term of the size of the
+  control memory (128K-1KVC, 512K-4KVC), the size of the packet
+  memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
+  UTP155, UTP25, DS3 and E3). Go to:
+  	<http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
+  for more info about the cards. Say Y (or M to compile as a module
+  named iphase.o) here if you have one of these cards.
+
+  See the file <file:Documentation/networking/iphase.txt> for further
+  details.
+
+CONFIG_ATM_IA_DEBUG
+  Somewhat useful debugging messages are available. The choice of
+  messages is controlled by a bitmap. This may be specified as a
+  module argument (kernel command line argument as well?), changed
+  dynamically using an ioctl (Get the debug utility, iadbg, from
+  <ftp://ftp.iphase.com/pub/atm/pci/>).
+
+  See the file <file:drivers/atm/iphase.h> for the meanings of the
+  bits in the mask.
+
+  When active, these messages can have a significant impact on the
+  speed of the driver, and the size of your syslog files! When
+  inactive, they will have only a modest impact on performance.
+
+CONFIG_ATM_FORE200E_MAYBE
+  This is a driver for the FORE Systems 200E-series ATM adapter
+  cards. It simultaneously supports PCA-200E and SBA-200E models
+  on PCI and SBUS hosts. Say Y (or M to compile as a module
+  named fore_200e.o) here if you have one of these ATM adapters.
+
+  Note that the driver will actually be compiled only if you
+  additionally enable the support for PCA-200E and/or SBA-200E
+  cards.
+
+  See the file <file:Documentation/networking/fore200e.txt> for
+  further details.
+
+CONFIG_ATM_FORE200E_PCA
+  Say Y here if you want your PCA-200E cards to be probed.
+
+CONFIG_ATM_FORE200E_PCA_DEFAULT_FW
+  Use the default PCA-200E firmware data shipped with the driver.
+
+  Normal users do not have to deal with the firmware stuff, so
+  they should say Y here.
+
+CONFIG_ATM_FORE200E_PCA_FW
+  This defines the pathname of an alternative PCA-200E binary
+  firmware image supplied by the user. This pathname may be
+  absolute or relative to the drivers/atm directory.
+
+  The driver comes with an adequate firmware image, so normal users do
+  not have to supply an alternative one. They just say Y to "Use
+  default PCA-200E firmware" instead.
+
+CONFIG_ATM_FORE200E_SBA
+  Say Y here if you want your SBA-200E cards to be probed.
+
+CONFIG_ATM_FORE200E_SBA_DEFAULT_FW
+  Use the default SBA-200E firmware data shipped with the driver.
+
+  Normal users do not have to deal with the firmware stuff, so
+  they should say Y here.
+
+CONFIG_ATM_FORE200E_SBA_FW
+  This defines the pathname of an alternative SBA-200E binary
+  firmware image supplied by the user. This pathname may be
+  absolute or relative to the drivers/atm directory.
+
+  The driver comes with an adequate firmware image, so normal users do
+  not have to supply an alternative one. They just say Y to "Use
+  default SBA-200E firmware", above.
+
+CONFIG_ATM_FORE200E_TX_RETRY
+  Specifies the number of times the driver attempts to transmit
+  a message before giving up, if the transmit queue of the ATM card
+  is transiently saturated.
+
+  Saturation of the transmit queue may occur only under extreme
+  conditions, e.g. when a fast host continuously submits very small
+  frames (<64 bytes) or raw AAL0 cells (48 bytes) to the ATM adapter.
+
+  Note that under common conditions, it is unlikely that you encounter
+  a saturation of the transmit queue, so the retry mechanism never
+  comes into play.
+
+CONFIG_ATM_FORE200E_DEBUG
+  Specifies the level of debugging messages issued by the driver.
+  The verbosity of the driver increases with the value of this
+  parameter.
+
+  When active, these messages can have a significant impact on
+  the performances of the driver, and the size of your syslog files!
+  Keep the debugging level to 0 during normal operations.
+
diff -urN linux-2.5.3-pre4/drivers/block/Config.help linux/drivers/block/Config.help
--- linux-2.5.3-pre4/drivers/block/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/block/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,242 @@
+CONFIG_BLK_DEV_FD
+  If you want to use the floppy disk drive(s) of your PC under Linux,
+  say Y. Information about this driver, especially important for IBM
+  Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+  That file also contains the location of the Floppy driver FAQ as
+  well as location of the fdutils package used to configure additional
+  parameters of the driver at run time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called floppy.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BLK_DEV_RAM
+  Saying Y here will allow you to use a portion of your RAM memory as
+  a block device, so that you can make file systems on it, read and
+  write to it and do all the other things that you can do with normal
+  block devices (such as hard drives). It is usually used to load and
+  store a copy of a minimal root file system off of a floppy into RAM
+  during the initial install of Linux.
+
+  Note that the kernel command line option "ramdisk=XX" is now
+  obsolete. For details, read <file:Documentation/ramdisk.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M and read <file:Documentation/modules.txt>. The module will be
+  called rd.o.
+
+  Most normal users won't need the RAM disk functionality, and can
+  thus say N here.
+
+CONFIG_BLK_DEV_RAM_SIZE
+  The default value is 4096. Only change this if you know what are
+  you doing. If you are using IBM S/390, then set this to 8192.
+
+CONFIG_BLK_DEV_INITRD
+  The initial RAM disk is a RAM disk that is loaded by the boot loader
+  (loadlin or lilo) and that is mounted as root before the normal boot
+  procedure. It is typically used to load modules needed to mount the
+  "real" root file system, etc. See <file:Documentation/initrd.txt>
+  for details.
+
+CONFIG_BLK_DEV_LOOP
+  Saying Y here will allow you to use a regular file as a block
+  device; you can then create a file system on that block device and
+  mount it just as you would mount other block devices such as hard
+  drive partitions, CD-ROM drives or floppy drives. The loop devices
+  are block special device files with major number 7 and typically
+  called /dev/loop0, /dev/loop1 etc.
+
+  This is useful if you want to check an ISO 9660 file system before
+  burning the CD, or if you want to use floppy images without first
+  writing them to floppy. Furthermore, some Linux distributions avoid
+  the need for a dedicated Linux partition by keeping their complete
+  root file system inside a DOS FAT file using this loop device
+  driver.
+
+  The loop device driver can also be used to "hide" a file system in a
+  disk partition, floppy, or regular file, either using encryption
+  (scrambling the data) or steganography (hiding the data in the low
+  bits of, say, a sound file). This is also safe if the file resides
+  on a remote file server. If you want to do this, you will first have
+  to acquire and install a kernel patch from
+  <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
+  say Y to this option.
+
+  Note that alternative ways to use encrypted file systems are
+  provided by the cfs package, which can be gotten from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
+  package, available at <http://tcfs.dia.unisa.it/>. You do not need
+  to say Y here if you want to use one of these. However, using cfs
+  requires saying Y to "NFS file system support" below while using
+  tcfs requires applying a kernel patch. An alternative steganography
+  solution is provided by StegFS, also available from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
+
+  To use the loop device, you need the losetup utility and a recent
+  version of the mount program, both contained in the util-linux
+  package. The location and current version number of util-linux is
+  contained in the file <file:Documentation/Changes>.
+
+  Note that this loop device has nothing to do with the loopback
+  device used for network connections from the machine to itself.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called loop.o.
+
+  Most users will answer N here.
+
+CONFIG_BLK_DEV_NBD
+  Saying Y here will allow your computer to be a client for network
+  block devices, i.e. it will be able to use block devices exported by
+  servers (mount file systems on them etc.). Communication between
+  client and server works over TCP/IP networking, but to the client
+  program this is hidden: it looks like a regular local file access to
+  a block device special file such as /dev/nd0.
+
+  Network block devices also allows you to run a block-device in
+  userland (making server and client physically the same computer,
+  communicating using the loopback network device).
+
+  Read <file:Documentation/nbd.txt> for more information, especially
+  about where to find the server code, which runs in user space and
+  does not need special kernel support.
+
+  Note that this has nothing to do with the network file systems NFS
+  or Coda; you can say N here even if you intend to use NFS or Coda.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called nbd.o.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_XD
+  Very old 8 bit hard disk controllers used in the IBM XT computer
+  will be supported if you say Y here.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called xd.o.
+
+  It's pretty unlikely that you have one of these: say N.
+
+CONFIG_BLK_DEV_PS2
+  Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
+  hard disk.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ps2esdi.o.
+
+CONFIG_BLK_DEV_DAC960
+  This driver adds support for the Mylex DAC960, AcceleRAID, and
+  eXtremeRAID PCI RAID controllers.  See the file
+  <file:Documentation/README.DAC960> for further information about
+  this driver.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called DAC960.o.
+
+CONFIG_PARIDE
+  There are many external CD-ROM and disk devices that connect through
+  your computer's parallel port. Most of them are actually IDE devices
+  using a parallel port IDE adapter. This option enables the PARIDE
+  subsystem which contains drivers for many of these external drives.
+  Read <file:Documentation/paride.txt> for more information.
+
+  If you have said Y to the "Parallel-port support" configuration
+  option, you may share a single port between your printer and other
+  parallel port devices. Answer Y to build PARIDE support into your
+  kernel, or M if you would like to build it as a loadable module. If
+  your parallel port support is in a loadable module, you must build
+  PARIDE as a module. If you built PARIDE support into your kernel,
+  you may still build the individual protocol modules and high-level
+  drivers as loadable modules. If you build this support as a module,
+  it will be called paride.o.
+
+  To use the PARIDE support, you must say Y or M here and also to at
+  least one high-level driver (e.g. "Parallel port IDE disks",
+  "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
+  to at least one protocol driver (e.g. "ATEN EH-100 protocol",
+  "MicroSolutions backpack protocol", "DataStor Commuter protocol"
+  etc.).
+
+CONFIG_BLK_CPQ_CISS_DA
+  This is the driver for Compaq Smart Array 5xxx controllers.
+  Everyone using these boards should say Y here.
+  See <file:Documentation/cciss.txt> for the current list of
+  boards supported by this driver, and for further information
+  on the use of this driver.
+
+CONFIG_CISS_SCSI_TAPE
+  When enabled (Y), this option allows SCSI tape drives and SCSI medium
+  changers (tape robots) to be accessed via a Compaq 5xxx array 
+  controller.  (See Documentation/cciss.txt for more details.)
+
+  "SCSI support" and "SCSI tape support" must also be enabled for this 
+  option to work.
+
+  When this option is disabled (N), the SCSI portion of the driver 
+  is not compiled.
+
+CONFIG_BLK_DEV_SWIM_IOP
+  Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
+  floppy controller on the Macintosh IIfx and Quadra 900/950.
+
+CONFIG_AMIGA_Z2RAM
+  This enables support for using Chip RAM and Zorro II RAM as a
+  ramdisk or as a swap partition. Say Y if you want to include this
+  driver in the kernel. This driver is also available as a module
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want). The module is called z2ram.o. If you want
+  to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ATARI_ACSI
+  This enables support for the Atari ACSI interface. The driver
+  supports hard disks and CD-ROMs, which have 512-byte sectors, or can
+  be switched to that mode. Due to the ACSI command format, only disks
+  up to 1 GB are supported. Special support for certain ACSI to SCSI
+  adapters, which could relax that, isn't included yet. The ACSI
+  driver is also the basis for certain other drivers for devices
+  attached to the ACSI bus: Atari SLM laser printer, BioNet-100
+  Ethernet, and PAMsNet Ethernet. If you want to use one of these
+  devices, you need ACSI support, too.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called acsi.o.
+
+CONFIG_ACSI_MULTI_LUN
+  If you have a ACSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, you should say Y here so that all
+  will be found by the ACSI driver. An ACSI device with multiple LUNs
+  acts logically like multiple ACSI devices. The vast majority of ACSI
+  devices have only one LUN, and so most people can say N here and
+  should in fact do so, because it is safer.
+
+CONFIG_ATARI_SLM
+  If you have an Atari SLM laser printer, say Y to include support for
+  it in the kernel. Otherwise, say N. This driver is also available as
+  a module ( = code which can be inserted in and removed from the
+  running kernel whenever you want). The module will be called
+  acsi_slm.o. Be warned: the driver needs much ST-RAM and can cause
+  problems due to that fact!
+
+CONFIG_BLK_CPQ_DA
+  This is the driver for Compaq Smart Array controllers.  Everyone
+  using these boards should say Y here.  See the file
+  <file:Documentation/cpqarray.txt> for the current list of boards
+  supported by this driver, and for further information on the use of
+  this driver.
+
diff -urN linux-2.5.3-pre4/drivers/block/loop.c linux/drivers/block/loop.c
--- linux-2.5.3-pre4/drivers/block/loop.c	Thu Jan 24 12:35:16 2002
+++ linux/drivers/block/loop.c	Thu Jan 24 12:35:34 2002
@@ -488,15 +488,15 @@
 			      struct bio *rbh)
 {
 	unsigned long IV = loop_get_iv(lo, rbh->bi_sector);
-	struct bio_vec *to;
+	struct bio_vec *from;
 	char *vto, *vfrom;
 	int ret = 0, i;
 
-	bio_for_each_segment(to, bio, i) {
-		vfrom = page_address(rbh->bi_io_vec[i].bv_page) + rbh->bi_io_vec[i].bv_offset;
-		vto = page_address(to->bv_page) + to->bv_offset;
+	bio_for_each_segment(from, rbh, i) {
+		vfrom = page_address(from->bv_page) + from->bv_offset;
+		vto = page_address(bio->bi_io_vec[i].bv_page) + bio->bi_io_vec[i].bv_offset;
 		ret |= lo_do_transfer(lo, bio_data_dir(bio), vto, vfrom,
-					to->bv_len, IV);
+					from->bv_len, IV);
 	}
 
 	return ret;
diff -urN linux-2.5.3-pre4/drivers/block/paride/Config.help linux/drivers/block/paride/Config.help
--- linux-2.5.3-pre4/drivers/block/paride/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/block/paride/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,223 @@
+CONFIG_PARIDE_PD
+  This option enables the high-level driver for IDE-type disk devices
+  connected through a parallel port. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  parallel port IDE driver, otherwise you should answer M to build
+  it as a loadable module. The module will be called pd.o. You
+  must also have at least one parallel port protocol driver in your
+  system. Among the devices supported by this driver are the SyQuest
+  EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
+  hard drives from MicroSolutions.
+
+CONFIG_PARIDE_PCD
+  This option enables the high-level driver for ATAPI CD-ROM devices
+  connected through a parallel port. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  parallel port ATAPI CD-ROM driver, otherwise you should answer M to
+  build it as a loadable module. The module will be called pcd.o. You
+  must also have at least one parallel port protocol driver in your
+  system. Among the devices supported by this driver are the
+  MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
+  you have such a CD-ROM drive, you should also say Y or M to "ISO
+  9660 CD-ROM file system support" below, because that's the file
+  system used on CD-ROMs.
+
+CONFIG_PARIDE_PF
+  This option enables the high-level driver for ATAPI disk devices
+  connected through a parallel port. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  parallel port ATAPI disk driver, otherwise you should answer M
+  to build it as a loadable module. The module will be called pf.o.
+  You must also have at least one parallel port protocol driver in
+  your system. Among the devices supported by this driver are the
+  MicroSolutions backpack PD/CD drive and the Imation Superdisk
+  LS-120 drive.
+
+CONFIG_PARIDE_PT
+  This option enables the high-level driver for ATAPI tape devices
+  connected through a parallel port. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  parallel port ATAPI disk driver, otherwise you should answer M
+  to build it as a loadable module. The module will be called pt.o.
+  You must also have at least one parallel port protocol driver in
+  your system. Among the devices supported by this driver is the
+  parallel port version of the HP 5GB drive.
+
+CONFIG_PARIDE_PG
+  This option enables a special high-level driver for generic ATAPI
+  devices connected through a parallel port. The driver allows user
+  programs, such as cdrtools, to send ATAPI commands directly to a
+  device.
+
+  If you chose to build PARIDE support into your kernel, you may
+  answer Y here to build in the parallel port generic ATAPI driver,
+  otherwise you should answer M to build it as a loadable module. The
+  module will be called pg.o.
+
+  You must also have at least one parallel port protocol driver in
+  your system.
+
+  This driver implements an API loosely related to the generic SCSI
+  driver. See <file:include/linux/pg.h>. for details.
+
+  You can obtain the most recent version of cdrtools from
+  <ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/>. Versions 1.6.1a3 and
+  later fully support this driver.
+
+CONFIG_PARIDE_ATEN
+  This option enables support for the ATEN EH-100 parallel port IDE
+  protocol. This protocol is used in some inexpensive low performance
+  parallel port kits made in Hong Kong. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  protocol driver, otherwise you should answer M to build it as a
+  loadable module. The module will be called aten.o. You must also
+  have a high-level driver for the type of device that you want to
+  support.
+
+CONFIG_PARIDE_BPCK
+  This option enables support for the Micro Solutions BACKPACK
+  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
+  before 1999 were Series 5) Series 5 drives will NOT always have the
+  Series noted on the bottom of the drive. Series 6 drivers will.
+
+  In other words, if your BACKPACK drive dosen't say "Series 6" on the
+  bottom, enable this option.
+
+  If you chose to build PARIDE support into your kernel, you may
+  answer Y here to build in the protocol driver, otherwise you should
+  answer M to build it as a loadable module.  The module will be
+  called bpck.o.  You must also have a high-level driver for the type
+  of device that you want to support.
+
+CONFIG_PARIDE_BPCK6
+  This option enables support for the Micro Solutions BACKPACK
+  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
+  after 1999 were Series 6) Series 6 drives will have the Series noted
+  on the bottom of the drive.  Series 5 drivers don't always have it
+  noted.
+
+  In other words, if your BACKPACK drive says "Series 6" on the
+  bottom, enable this option.
+
+  If you chose to build PARIDE support into your kernel, you may
+  answer Y here to build in the protocol driver, otherwise you should
+  answer M to build it as a loadable module.  The module will be
+  called bpck6.o.  You must also have a high-level driver for the type
+  of device that you want to support.
+
+CONFIG_PARIDE_COMM
+  This option enables support for the Commuter parallel port IDE
+  protocol from DataStor. If you chose to build PARIDE support
+  into your kernel, you may answer Y here to build in the protocol
+  driver, otherwise you should answer M to build it as a loadable
+  module. The module will be called comm.o. You must also have
+  a high-level driver for the type of device that you want to support.
+
+CONFIG_PARIDE_DSTR
+  This option enables support for the EP-2000 parallel port IDE
+  protocol from DataStor. If you chose to build PARIDE support
+  into your kernel, you may answer Y here to build in the protocol
+  driver, otherwise you should answer M to build it as a loadable
+  module. The module will be called dstr.o. You must also have
+  a high-level driver for the type of device that you want to support.
+
+CONFIG_PARIDE_EPAT
+  This option enables support for the EPAT parallel port IDE protocol.
+  EPAT is a parallel port IDE adapter manufactured by Shuttle
+  Technology and widely used in devices from major vendors such as
+  Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
+  PARIDE support into your kernel, you may answer Y here to build in
+  the protocol driver, otherwise you should answer M to build it as a
+  loadable module. The module will be called epat.o. You must also
+  have a high-level driver for the type of device that you want to
+  support.
+
+CONFIG_PARIDE_EPATC8
+  This option enables support for the newer Shuttle EP1284 (aka c7 and
+  c8) chip. You need this if you are using any recent Imation SuperDisk
+  (LS-120) drive.
+
+CONFIG_PARIDE_EPIA
+  This option enables support for the (obsolete) EPIA parallel port
+  IDE protocol from Shuttle Technology. This adapter can still be
+  found in some no-name kits. If you chose to build PARIDE support
+  into your kernel, you may answer Y here to build in the protocol
+  driver, otherwise you should answer M to build it as a loadable
+  module. The module will be called epia.o. You must also have a
+  high-level driver for the type of device that you want to support.
+
+CONFIG_PARIDE_FIT2
+  This option enables support for the TD-2000 parallel port IDE
+  protocol from Fidelity International Technology. This is a simple
+  (low speed) adapter that is used in some portable hard drives. If
+  you chose to build PARIDE support into your kernel, you may answer Y
+  here to build in the protocol driver, otherwise you should answer M
+  to build it as a loadable module. The module will be called ktti.o.
+  You must also have a high-level driver for the type of device that
+  you want to support.
+
+CONFIG_PARIDE_FIT3
+  This option enables support for the TD-3000 parallel port IDE
+  protocol from Fidelity International Technology. This protocol is
+  used in newer models of their portable disk, CD-ROM and PD/CD
+  devices. If you chose to build PARIDE support into your kernel, you
+  may answer Y here to build in the protocol driver, otherwise you
+  should answer M to build it as a loadable module. The module will be
+  called fit3.o. You must also have a high-level driver for the type
+  of device that you want to support.
+
+CONFIG_PARIDE_FRIQ
+  This option enables support for version 2 of the Freecom IQ parallel
+  port IDE adapter.  This adapter is used by the Maxell Superdisk
+  drive.  If you chose to build PARIDE support into your kernel, you
+  may answer Y here to build in the protocol driver, otherwise you
+  should answer M to build it as a loadable module. The module will be
+  called friq.o. You must also have a high-level driver for the type
+  of device that you want to support.
+
+CONFIG_PARIDE_FRPW
+  This option enables support for the Freecom power parallel port IDE
+  protocol. If you chose to build PARIDE support into your kernel, you
+  may answer Y here to build in the protocol driver, otherwise you
+  should answer M to build it as a loadable module. The module will be
+  called frpw.o. You must also have a high-level driver for the type
+  of device that you want to support.
+
+CONFIG_PARIDE_KBIC
+  This option enables support for the KBIC-951A and KBIC-971A parallel
+  port IDE protocols from KingByte Information Corp. KingByte's
+  adapters appear in many no-name portable disk and CD-ROM products,
+  especially in Europe. If you chose to build PARIDE support into your
+  kernel, you may answer Y here to build in the protocol driver,
+  otherwise you should answer M to build it as a loadable module. The
+  module will be called kbic.o. You must also have a high-level driver
+  for the type of device that you want to support.
+
+CONFIG_PARIDE_KTTI
+  This option enables support for the "PHd" parallel port IDE protocol
+  from KT Technology. This is a simple (low speed) adapter that is
+  used in some 2.5" portable hard drives. If you chose to build PARIDE
+  support into your kernel, you may answer Y here to build in the
+  protocol driver, otherwise you should answer M to build it as a
+  loadable module. The module will be called ktti.o. You must also
+  have a high-level driver for the type of device that you want to
+  support.
+
+CONFIG_PARIDE_ON20
+  This option enables support for the (obsolete) 90c20 parallel port
+  IDE protocol from OnSpec (often marketed under the ValuStore brand
+  name). If you chose to build PARIDE support into your kernel, you
+  may answer Y here to build in the protocol driver, otherwise you
+  should answer M to build it as a loadable module. The module will
+  be called on20.o. You must also have a high-level driver for the
+  type of device that you want to support.
+
+CONFIG_PARIDE_ON26
+  This option enables support for the 90c26 parallel port IDE protocol
+  from OnSpec Electronics (often marketed under the ValuStore brand
+  name). If you chose to build PARIDE support into your kernel, you
+  may answer Y here to build in the protocol driver, otherwise you
+  should answer M to build it as a loadable module. The module will be
+  called on26.o. You must also have a high-level driver for the type
+  of device that you want to support.
+
diff -urN linux-2.5.3-pre4/drivers/bluetooth/Config.help linux/drivers/bluetooth/Config.help
--- linux-2.5.3-pre4/drivers/bluetooth/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/bluetooth/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,23 @@
+CONFIG_BLUEZ_HCIUART
+  Bluetooth HCI UART driver.
+  This driver is required if you want to use Bluetooth devices with
+  serial port interface.
+
+  Say Y here to compile support for Bluetooth UART devices into the
+  kernel or say M to compile it as module (hci_uart.o).
+
+CONFIG_BLUEZ_HCIUSB
+  Bluetooth HCI USB driver.
+  This driver is required if you want to use Bluetooth devices with
+  USB interface.
+
+  Say Y here to compile support for Bluetooth USB devices into the
+  kernel or say M to compile it as module (hci_usb.o).
+
+CONFIG_BLUEZ_HCIVHCI
+  Bluetooth Virtual HCI device driver.
+  This driver is required if you want to use HCI Emulation software.
+
+  Say Y here to compile support for virtual HCI devices into the
+  kernel or say M to compile it as module (hci_vhci.o).
+
diff -urN linux-2.5.3-pre4/drivers/cdrom/Config.help linux/drivers/cdrom/Config.help
--- linux-2.5.3-pre4/drivers/cdrom/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/cdrom/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,227 @@
+CONFIG_CDU31A
+  These CD-ROM drives have a spring-pop-out caddyless drawer, and a
+  rectangular green LED centered beneath it.  NOTE: these CD-ROM
+  drives will not be auto detected by the kernel at boot time; you
+  have to provide the interface address as an option to the kernel at
+  boot time as described in <file:Documentation/cdrom/cdu31a> or fill
+  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cdu31a.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MCD
+  This is the older of the two drivers for the older Mitsumi models
+  LU-005, FX-001 and FX-001D. This is not the right driver for the
+  FX-001DE and the triple or quad speed models (all these are
+  IDE/ATAPI models). Please also the file
+  <file:Documentation/cdrom/mcd>.
+
+  With the old LU-005 model, the whole drive chassis slides out for cd
+  insertion. The FX-xxx models use a motorized tray type mechanism.
+  Note that this driver does not support XA or MultiSession CDs
+  (PhotoCDs). There is a new driver (next question) which can do
+  this. If you want that one, say N here.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mcd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MCD_IRQ
+  This allows you to specify the default value of the IRQ used by the
+  driver. This setting can be overridden by passing the "mcd="
+  parameter to the kernel at boot time (or at module load time if you
+  said M to "Standard Mitsumi CD-ROM support").
+
+CONFIG_MCD_BASE
+  This allows you to specify the default value of the I/O base address
+  used by the driver. This setting can be overridden by passing the
+  "mcd=" parameter to the kernel at boot time (or at module load time
+  if you said M to "Standard Mitsumi CD-ROM support").
+
+CONFIG_MCDX
+  Use this driver if you want to be able to read XA or MultiSession
+  CDs (PhotoCDs) as well as ordinary CDs with your Mitsumi LU-005,
+  FX-001 or FX-001D CD-ROM drive. In addition, this driver uses much
+  less kernel memory than the old one, if that is a concern. This
+  driver is able to support more than one drive, but each drive needs
+  a separate interface card. Please read the file
+  <file:Documentation/cdrom/mcdx>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mcdx.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SBPCD
+  This driver supports most of the drives which use the Panasonic or
+  Sound Blaster interface.  Please read the file
+  <file:Documentation/cdrom/sbpcd>.
+
+  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
+  (sometimes labeled "Creative"), the Creative Labs CD200, the
+  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
+  model), the TEAC CD-55A fall under this category.  Some other
+  "electrically compatible" drives (Vertos, Genoa, some Funai models)
+  are currently not supported; for the Sanyo H94A drive currently a
+  separate driver (asked later) is responsible.  Most drives have a
+  uniquely shaped faceplate, with a caddyless motorized drawer, but
+  without external brand markings.  The older CR-52x drives have a
+  caddy and manual loading/eject, but still no external markings.  The
+  driver is able to do an extended auto-probing for interface
+  addresses and drive types; this can help to find facts in cases you
+  are not sure, but can consume some time during the boot process if
+  none of the supported drives gets found.  Once your drive got found,
+  you should enter the reported parameters into
+  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
+
+  This driver can support up to four CD-ROM controller cards, and each
+  card can support up to four CD-ROM drives; if you say Y here, you
+  will be asked how many controller cards you have.  If compiled as a
+  module, only one controller card (but with up to four drives) is
+  usable.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sbpcd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SBPCD2
+  Say Y here only if you have two CD-ROM controller cards of this type
+  (usually only if you have more than four drives).  You should enter
+  the parameters for the second, third and fourth interface card into
+  <file:drivers/cdrom/sbpcd.h> before compiling the new kernel.  Read
+  the file <file:Documentation/cdrom/sbpcd>.
+
+CONFIG_SBPCD3
+  Say Y here only if you have three CD-ROM controller cards of this
+  type (usually only if you have more than six drives).  You should
+  enter the parameters for the second, third and fourth interface card
+  into <file:include/linux/sbpcd.h> before compiling the new kernel.
+  Read the file <file:Documentation/cdrom/sbpcd>.
+
+CONFIG_SBPCD4
+  Say Y here only if you have four CD-ROM controller cards of this
+  type (usually only if you have more than eight drives).  You should
+  enter the parameters for the second, third and fourth interface card
+  into <file:include/linux/sbpcd.h> before compiling the new kernel.
+  Read the file <file:Documentation/cdrom/sbpcd>.
+
+CONFIG_AZTCD
+  This is your driver if you have an Aztech CDA268-01A, Orchid
+  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
+  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
+  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
+  as Aztech CDA269-031SE. Please read the file
+  <file:Documentation/cdrom/aztcd>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aztcd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_CDU535
+  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
+  drives. Please read the file <file:Documentation/cdrom/sonycd535>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sonycd535.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_GSCD
+  If this is your CD-ROM drive, say Y here.  As described in the file
+  <file:Documentation/cdrom/gscd>, you might have to change a setting
+  in the file <file:drivers/cdrom/gscd.h> before compiling the
+  kernel.  Please read the file <file:Documentation/cdrom/gscd>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gscd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_CM206
+  If you have a Philips/LMS CD-ROM drive cm206 in combination with a
+  cm260 host adapter card, say Y here. Please also read the file
+  <file:Documentation/cdrom/cm206>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cm206.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_OPTCD
+  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
+  compatible interface. It also works with the Lasermate CR328A. If
+  you have one of those, say Y. This driver does not work for the
+  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
+  one. Please read the file <file:Documentation/cdrom/optcd>.
+
+  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+  file system support" below, because that's the file system used on
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called optcd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SJCD
+  If this is your CD-ROM drive, say Y here and read the file
+  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
+  "ISO 9660 CD-ROM file system support" below, because that's the
+  file system used on CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sjcd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ISP16_CDI
+  These are sound cards with built-in cdrom interfaces using the OPTi
+  82C928 or 82C929 chips. Say Y here to have them detected and
+  possibly configured at boot time. In addition, You'll have to say Y
+  to a driver for the particular cdrom drive you have attached to the
+  card. Read <file:Documentation/cdrom/isp16> for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called isp16.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/char/Config.help linux/drivers/char/Config.help
--- linux-2.5.3-pre4/drivers/char/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/char/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,1133 @@
+CONFIG_QTRONIX_KEYBOARD
+  Images of Qtronix keyboards are at
+  <http://www.qtronix.com/keyboard.html>.
+
+CONFIG_SERIAL_NONSTANDARD
+  Say Y here if you have any non-standard serial boards -- boards
+  which aren't supported using the standard "dumb" serial driver.
+  This includes intelligent serial boards such as Cyclades,
+  Digiboards, etc. These are usually used for systems that need many
+  serial ports because they serve many terminals or dial-in
+  connections.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about non-standard serial boards.
+
+  Most people can say N here.
+
+CONFIG_SERIAL_EXTENDED
+  If you wish to use any non-standard features of the standard "dumb"
+  driver, say Y here. This includes HUB6 support, shared serial
+  interrupts, special multiport support, support for more than the
+  four COM 1/2/3/4 boards, etc.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about serial driver options. If unsure, say N.
+
+CONFIG_SERIAL_MANY_PORTS
+  Say Y here if you have dumb serial boards other than the four
+  standard COM 1/2/3/4 ports. This may happen if you have an AST
+  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>), or other custom
+  serial port hardware which acts similar to standard serial port
+  hardware. If you only use the standard COM 1/2/3/4 ports, you can
+  say N here to save some memory. You can also say Y if you have an
+  "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+CONFIG_SERIAL_ACPI
+  Legacy free machines may not have serial ports at the legacy COM1, 
+  COM2 etc addresses. Serial ports on such machines are described by
+  the ACPI tables SPCR (Serial Port Console Redirection) table and 
+  DBGP (Debug Port) table. Say Y here if you want to include support
+  for these serial ports.
+
+CONFIG_SERIAL_SHARE_IRQ
+  Some serial boards have hardware support which allows multiple dumb
+  serial ports on the same board to share a single IRQ. To enable
+  support for this in the serial driver, say Y here.
+
+CONFIG_SERIAL_DETECT_IRQ
+  Say Y here if you want the kernel to try to guess which IRQ
+  to use for your serial port.
+
+  This is considered unsafe; it is far better to configure the IRQ in
+  a boot script using the setserial command.
+
+  If unsure, say N.
+
+CONFIG_SERIAL_MULTIPORT
+  Some multiport serial ports have special ports which are used to
+  signal when there are any serial ports on the board which need
+  servicing. Say Y here to enable the serial driver to take advantage
+  of those special I/O ports.
+
+CONFIG_HUB6
+  Say Y here to enable support in the dumb serial driver to support
+  the HUB6 card.
+
+CONFIG_MWAVE
+  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
+  kernel driver and a user level application. Together these components
+  support direct attachment to public switched telephone networks (PSTNs)
+  and support selected world wide countries.
+
+  This version of the ACP Modem driver supports the IBM Thinkpad 600E,
+  600, and 770 that include on board ACP modem hardware.
+
+  The modem also supports the standard communications port interface
+  (ttySx) and is compatible with the Hayes AT Command Set.
+
+  The user level application needed to use this driver can be found at
+  the IBM Linux Technology Center (LTC) web site:
+  <http://www.ibm.com/linux/ltc/>.
+
+  If you own one of the above IBM Thinkpads which has the Mwave chipset
+  in it, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mwave.o. If you want to compile it as
+  a module, say M here and read Documentation/modules.txt.
+
+CONFIG_AGP
+  AGP (Accelerated Graphics Port) is a bus system mainly used to
+  connect graphics cards to the rest of the system.
+
+  If you have an AGP system and you say Y here, it will be possible to
+  use the AGP features of your 3D rendering video card. This code acts
+  as a sort of "AGP driver" for the motherboard's chipset.
+
+  If you need more texture memory than you can get with the AGP GART
+  (theoretically up to 256 MB, but in practice usually 64 or 128 MB
+  due to kernel allocation issues), you could use PCI accesses
+  and have up to a couple gigs of texture space.
+
+  Note that this is the only means to have XFree4/GLX use
+  write-combining with MTRR support on the AGP bus. Without it, OpenGL
+  direct rendering will be a lot slower but still faster than PIO.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+  This driver is available as a module.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.  The
+  module will be called agpgart.o.
+
+CONFIG_AGP_INTEL
+  This option gives you AGP support for the GLX component of the
+  XFree86 4.x on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850 and 860 chipsets.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+CONFIG_AGP_I810
+  This option gives you AGP support for the Xserver on the Intel 810
+  815 and 830m chipset boards for their on-board integrated graphics. This
+  is required to do any useful video modes with these boards.
+
+CONFIG_AGP_VIA
+  This option gives you AGP support for the GLX component of the
+  XFree86 4.x on VIA MPV3/Apollo Pro chipsets.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+CONFIG_AGP_AMD
+  This option gives you AGP support for the GLX component of the
+  XFree86 4.x on AMD Irongate, 761, and 762 chipsets.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+CONFIG_AGP_SIS
+  This option gives you AGP support for the GLX component of the "soon
+  to be released" XFree86 4.x on Silicon Integrated Systems [SiS]
+  chipsets.
+
+  Note that 5591/5592 AGP chipsets are NOT supported.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+CONFIG_AGP_SWORKS
+  Say Y here to support the Serverworks AGP card.  See 
+  <http://www.serverworks.com/> for product descriptions and images.
+
+CONFIG_AGP_ALI
+  This option gives you AGP support for the GLX component of the
+  XFree86 4.x on the following ALi chipsets.  The supported chipsets
+  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
+  For the ALi-chipset question, ALi suggests you refer to
+  <http://www.ali.com.tw/eng/support/index.shtml>.
+
+  The M1541 chipset can do AGP 1x and 2x, but note that there is an
+  acknowledged incompatibility with Matrox G200 cards. Due to
+  timing issues, this chipset cannot do AGP 2x with the G200.
+  This is a hardware limitation. AGP 1x seems to be fine, though.
+
+  You should say Y here if you use XFree86 3.3.6 or 4.x and want to
+  use GLX or DRI.  If unsure, say N.
+
+CONFIG_I810_TCO
+  Hardware driver for the TCO timer built into the Intel i810 and i815
+  chipset family.  The TCO (Total Cost of Ownership) timer is a
+  watchdog timer that will reboot the machine after its second
+  expiration. The expiration time can be configured by commandline
+  argument "i810_margin=<n>" where <n> is the counter initial value.
+  It is decremented every 0.6 secs, the default is 50 which gives a
+  timeout of 30 seconds and one minute until reset.
+
+  On some motherboards the driver may fail to reset the chipset's
+  NO_REBOOT flag which prevents the watchdog from rebooting the
+  machine. If this is the case you will get a kernel message like
+  "i810tco init: failed to reset NO_REBOOT flag".
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  i810-tco.o.
+
+CONFIG_VT
+  If you say Y here, you will get support for terminal devices with
+  display and keyboard devices. These are called "virtual" because you
+  can run several virtual terminals (also called virtual consoles) on
+  one physical terminal. This is rather useful, for example one
+  virtual terminal can collect system messages and warnings, another
+  one can be used for a text-mode user session, and a third could run
+  an X session, all in parallel. Switching between virtual terminals
+  is done with certain key combinations, usually Alt-<function key>.
+
+  The setterm command ("man setterm") can be used to change the
+  properties (such as colors or beeping) of a virtual terminal. The
+  man page console_codes(4) ("man console_codes") contains the special
+  character sequences that can be used to change those properties
+  directly. The fonts used on virtual terminals can be changed with
+  the setfont ("man setfont") command and the key bindings are defined
+  with the loadkeys ("man loadkeys") command.
+
+  You need at least one virtual terminal device in order to make use
+  of your keyboard and monitor. Therefore, only people configuring an
+  embedded system would want to say N here in order to save some
+  memory; the only way to log into such a system is then via a serial
+  or network connection.
+
+  If unsure, say Y, or else you won't be able to do much with your new
+  shiny Linux system :-)
+
+CONFIG_VT_CONSOLE
+  The system console is the device which receives all kernel messages
+  and warnings and which allows logins in single user mode. If you
+  answer Y here, a virtual terminal (the device used to interact with
+  a physical terminal) can be used as system console. This is the most
+  common mode of operations, so you should say Y here unless you want
+  the kernel messages be output only to a serial port (in which case
+  you should say Y to "Console on serial port", below).
+
+  If you do say Y here, by default the currently visible virtual
+  terminal (/dev/tty0) will be used as system console. You can change
+  that with a kernel command line option such as "console=tty3" which
+  would use the third virtual terminal as system console. (Try "man
+  bootparam" or see the documentation of your boot loader (lilo or
+  loadlin) about how to pass options to the kernel at boot time.)
+
+  If unsure, say Y.
+
+CONFIG_SERIAL
+  This selects whether you want to include the driver for the standard
+  serial ports.  The standard answer is Y.  People who might say N
+  here are those that are setting up dedicated Ethernet WWW/FTP
+  servers, or users that have one of the various bus mice instead of a
+  serial mouse and don't intend to use their machine's standard serial
+  port for anything.  (Note that the Cyclades and Stallion multi
+  serial port drivers do not need this driver built in for them to
+  work.)
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  serial.o.
+  [WARNING: Do not compile this driver as a module if you are using
+  non-standard serial ports, since the configuration information will
+  be lost when the driver is unloaded.  This limitation may be lifted
+  in the future.]
+
+  BTW1: If you have a mouseman serial mouse which is not recognized by
+  the X window system, try running gpm first.
+
+  BTW2: If you intend to use a software modem (also called Winmodem)
+  under Linux, forget it.  These modems are crippled and require
+  proprietary drivers which are only available under Windows.
+
+  Most people will say Y or M here, so that they can use serial mice,
+  modems and similar devices connecting to the standard serial ports.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
+CONFIG_ROCKETPORT
+  This is a driver for the Comtrol Rocketport cards which provide
+  multiple serial ports. You would need something like this to connect
+  more than two modems to your Linux box, for instance in order to
+  become a dial-in server.
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  rocket.o.
+
+CONFIG_DIGIEPCA
+  This is a driver for Digi International's Xx, Xeve, and Xem series
+  of cards which provide multiple serial ports. You would need
+  something like this to connect more than two modems to your Linux
+  box, for instance in order to become a dial-in server. This driver
+  supports the original PC (ISA) boards as well as PCI, and EISA. If
+  you have a card like this, say Y here and read the file
+  <file:Documentation/digiepca.txt>.
+
+  NOTE: There is another, separate driver for the Digiboard PC boards:
+  "Digiboard PC/Xx Support" below. You should (and can) only select
+  one of the two drivers.
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called epca.o.
+
+CONFIG_DIGI
+  This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
+  that give you many serial ports. You would need something like this
+  to connect more than two modems to your Linux box, for instance in
+  order to become a dial-in server. If you have a card like that, say
+  Y here and read the file <file:Documentation/digiboard.txt>.
+
+  If you want to compile this driver as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called pcxx.o.
+
+CONFIG_RISCOM8
+  This is a driver for the SDL Communications RISCom/8 multiport card,
+  which gives you many serial ports. You would need something like
+  this to connect more than two modems to your Linux box, for instance
+  in order to become a dial-in server. If you have a card like that,
+  say Y here and read the file <file:Documentation/riscom8.txt>.
+
+  Also it's possible to say M here and compile this driver as kernel
+  loadable module; the module will be called riscom8.o.
+
+CONFIG_COMPUTONE
+  This driver supports the entire family of Intelliport II/Plus
+  controllers with the exception of the MicroChannel controllers and
+  products previous to the Intelliport II. These are multiport cards,
+  which give you many serial ports. You would need something like this
+  to connect more than two modems to your Linux box, for instance in
+  order to become a dial-in server. If you have a card like that, say
+  Y here and read <file:Documentation/computone.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. You will get
+  two modules called ip2.o and ip2main.o.
+
+CONFIG_SPECIALIX
+  This is a driver for the Specialix IO8+ multiport card (both the
+  ISA and the PCI version) which gives you many serial ports. You
+  would need something like this to connect more than two modems to
+  your Linux box, for instance in order to become a dial-in server.
+
+  If you have a card like that, say Y here and read the file
+  <file:Documentation/specialix.txt>. Also it's possible to say M here
+  and compile this driver as kernel loadable module which will be
+  called specialix.o.
+
+CONFIG_SPECIALIX_RTSCTS
+  The Specialix IO8+ card can only support either RTS or DTR. If you
+  say N here, the driver will use the pin as "DTR" when the tty is in
+  software handshake mode.  If you say Y here or hardware handshake is
+  on, it will always be RTS.  Read the file
+  <file:Documentation/specialix.txt> for more information.
+
+CONFIG_RIO
+  This is a driver for the Specialix RIO, a smart serial card which
+  drives an outboard box that can support up to 128 ports.  Product
+  information is at <http://www.sphinxcst.co.uk/perle/multi.htm>.
+  There are both ISA and PCI versions.
+
+CONFIG_RIO_OLDPCI
+  Older RIO PCI cards need some initialization-time configuration to
+  determine the IRQ and some control addresses.  If you have a RIO and
+  this doesn't seem to work, try setting this to Y.
+
+CONFIG_CYCLADES
+  This is a driver for a card that gives you many serial ports. You
+  would need something like this to connect more than two modems to
+  your Linux box, for instance in order to become a dial-in server.
+  For information about the Cyclades-Z card, read
+  <file:drivers/char/README.cycladesZ>.
+
+  As of 1.3.9x kernels, this driver's minor numbers start at 0 instead
+  of 32.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called cyclades.o.
+
+  If you haven't heard about it, it's safe to say N.
+
+CONFIG_CYZ_INTR
+  The Cyclades-Z family of multiport cards allows 2 (two) driver op
+  modes: polling and interrupt. In polling mode, the driver will check
+  the status of the Cyclades-Z ports every certain amount of time
+  (which is called polling cycle and is configurable). In interrupt
+  mode, it will use an interrupt line (IRQ) in order to check the
+  status of the Cyclades-Z ports. The default op mode is polling. If
+  unsure, say N.
+
+CONFIG_STALDRV
+  Stallion cards give you many serial ports.  You would need something
+  like this to connect more than two modems to your Linux box, for
+  instance in order to become a dial-in server.  If you say Y here,
+  you will be asked for your specific card model in the next
+  questions.  Make sure to read <file:Documentation/stallion.txt> in
+  this case.  If you have never heard about all this, it's safe to
+  say N.
+
+CONFIG_STALLION
+  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
+  card, then this is for you; say Y.  Make sure to read
+  <file:Documentation/stallion.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called stallion.o.
+
+CONFIG_ISTALLION
+  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
+  serial multiport card, say Y here. Make sure to read
+  <file:Documentation/stallion.txt>.
+
+  To compile it as a module ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt>. The module will be called
+  istallion.o.
+
+CONFIG_SYNCLINK
+  Provides support for the SyncLink ISA and PCI multiprotocol serial
+  adapters. These adapters support asynchronous and HDLC bit
+  synchronous communication up to 10Mbps (PCI adapter).
+
+  This driver can only be built as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called synclink.o.  If you want to do that, say M
+  here.
+
+CONFIG_N_HDLC
+  Allows synchronous HDLC communications with tty device drivers that
+  support synchronous HDLC such as the Microgate SyncLink adapter.
+
+  This driver can only be built as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called n_hdlc.o. If you want to do that, say M
+  here.
+
+CONFIG_SX
+  This is a driver for the SX and SI multiport serial cards.
+  Please read the file <file:Documentation/sx.txt> for details.
+
+  This driver can only be built as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sx.o. If you want to do that, say M here.
+
+CONFIG_ESPSERIAL
+  This is a driver which supports Hayes ESP serial ports.  Both single
+  port cards and multiport cards are supported.  Make sure to read
+  <file:Documentation/hayes-esp.txt>.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>.  The module will be
+  called esp.o.  If unsure, say N.
+
+CONFIG_MOXA_INTELLIO
+  Say Y here if you have a Moxa Intellio multiport serial card.
+
+  This driver can also be built as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called moxa.o. If you want to do that, say M
+  here.
+
+CONFIG_MOXA_SMARTIO
+  Say Y here if you have a Moxa SmartIO multiport serial card.
+
+  This driver can also be built as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mxser.o. If you want to do that, say M
+  here.
+
+CONFIG_ISI
+  This is a driver for the Multi-Tech cards which provide several
+  serial ports.  The driver is experimental and can currently only be
+  built as a module ( = code which can be inserted in and removed from
+  the running kernel whenever you want).  Please read
+  <file:Documentation/modules.txt>.  The module will be called
+  isicom.o.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_PRINTER
+  If you intend to attach a printer to the parallel port of your Linux
+  box (as opposed to using a serial printer; if the connector at the
+  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+  Also read the Printing-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  It is possible to share one parallel port among several devices
+  (e.g. printer and ZIP drive) and it is safe to compile the
+  corresponding drivers into the kernel.  If you want to compile this
+  driver as a module however ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt> and
+  <file:Documentation/parport.txt>.  The module will be called lp.o.
+
+  If you have several parallel ports, you can specify which ports to
+  use with the "lp" kernel command line option.  (Try "man bootparam"
+  or see the documentation of your boot loader (lilo or loadlin) about
+  how to pass options to the kernel at boot time.)  The syntax of the
+  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+  If you have more than 8 printers, you need to increase the LP_NO
+  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+CONFIG_LP_CONSOLE
+  If you want kernel messages to be printed out as they occur, you
+  can have a console on the printer. This option adds support for
+  doing that; to actually get it to happen you need to pass the
+  option "console=lp0" to the kernel at boot time.
+
+  If the printer is out of paper (or off, or unplugged, or too
+  busy..) the kernel will stall until the printer is ready again.
+  By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
+  can make the kernel continue when this happens,
+  but it'll lose the kernel messages.
+
+  If unsure, say N.
+
+CONFIG_PPDEV
+  Saying Y to this adds support for /dev/parport device nodes.  This
+  is needed for programs that want portable access to the parallel
+  port, for instance deviceid (which displays Plug-and-Play device
+  IDs).
+
+  This is the parallel port equivalent of SCSI generic support (sg).
+  It is safe to say N to this -- it is not needed for normal printing
+  or parallel port CD-ROM/disk support.
+
+  This support is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  ppdev.o.
+
+  If unsure, say N.
+
+CONFIG_BUSMOUSE
+  Say Y here if your machine has a bus mouse as opposed to a serial
+  mouse. Most people have a regular serial MouseSystem or
+  Microsoft mouse (made by Logitech) that plugs into a COM port
+  (rectangular with 9 or 25 pins). These people say N here. 
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  This is the generic bus mouse driver code. If you have a bus mouse,
+  you will have to say Y here and also to the specific driver for your
+  mouse below.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called busmouse.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MOUSE
+  This is for machines with a mouse which is neither a serial nor a
+  bus mouse. Examples are PS/2 mice (such as the track balls on some
+  laptops) and some digitizer pads. Most people have a regular serial
+  MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
+  COM port (rectangular with 9 or 25 pins). These people say N here.
+  If you have something else, read the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
+  information about all non-serial mice, not just bus mice.
+
+  If you have a laptop, you either have to check the documentation or
+  experiment a bit to find out whether the trackball is a serial mouse
+  or not; it's best to say Y here for you.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about non-serial mice. If unsure, say Y.
+
+CONFIG_LOGIBUSMOUSE
+  Logitech mouse connected to a proprietary interface card.  It's
+  generally a round connector with 9 pins. Note that the newer mice
+  made by Logitech don't use the Logitech protocol anymore; for those,
+  you don't need this option.  You want to read the Busmouse-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called busmouse.o.  If you are unsure, say N and read the
+  HOWTO nevertheless: it will tell you what you have.
+
+CONFIG_PSMOUSE
+  The PS/2 mouse connects to a special mouse port that looks much like
+  the keyboard port (small circular connector with 6 pins). This way,
+  the mouse does not use any serial ports. This port can also be used
+  for other input devices like light pens, tablets, keypads. Compaq,
+  AST and IBM all use this as their mouse port on currently shipping
+  machines. The trackballs of some laptops are PS/2 mice also. In
+  particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse.
+
+  Although PS/2 mice are not technically bus mice, they are explained
+  in detail in the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  When using a PS/2 mouse, you can get problems if you want to use the
+  mouse both on the Linux console and under X. Using the "-R" option
+  of the Linux mouse managing program gpm (available from
+  <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
+  the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
+
+CONFIG_82C710_MOUSE
+  This is a certain kind of PS/2 mouse used on the TI Travelmate. If
+  you are unsure, try first to say N here and come back if the mouse
+  doesn't work. Read the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_PC110_PAD
+  This drives the digitizer pad on the IBM PC110 palmtop.  It can turn
+  the digitizer pad into a PS/2 mouse emulation with tap gestures or
+  into an absolute pad.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called pc110pad.o.
+
+CONFIG_MS_BUSMOUSE
+  These animals (also called Inport mice) are connected to an
+  expansion board using a round connector with 9 pins. If this is what
+  you have, say Y and read the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you are unsure, say N and read the HOWTO nevertheless: it will
+  tell you what you have. Also be aware that several vendors talk
+  about 'Microsoft busmouse' and actually mean PS/2 busmouse -- so
+  count the pins on the connector.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called msbusmouse.o.
+
+CONFIG_ADBMOUSE
+  Say Y here if you have this type of bus mouse (4 pin connector) as
+  is common on Macintoshes.  You may want to read the Busmouse-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called adbmouse.o.
+
+CONFIG_ATIXL_BUSMOUSE
+  This is a rare type of busmouse that is connected to the back of an
+  ATI video card.  Say Y if you have one of those. Note however that
+  most mice by ATI are actually Microsoft busmice; you should say Y to
+  "Microsoft busmouse support" above if you have one of those.  Read
+  the Busmouse-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called atixlmouse.o.
+
+  If you are unsure, say N and read the HOWTO nevertheless: it will
+  tell you what you have.
+
+CONFIG_QIC02_TAPE
+  If you have a non-SCSI tape drive like that, say Y. Or, if you want
+  to compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  tpqic02.o.
+
+CONFIG_QIC02_DYNCONF
+  You can either configure this driver once and for all by editing a
+  header file (<file:include/linux/tpqic02.h>), in which case you
+  should say N, or you can fetch a program via anonymous FTP which is
+  able to configure this driver during runtime.  The program to do
+  this is called 'qic02conf' and it is part of the
+  tpqic02-support-X.Y.tar.gz support package.
+
+  If you want to use the qic02conf program, say Y.
+
+CONFIG_FTAPE
+  If you have a tape drive that is connected to your floppy
+  controller, say Y here.
+
+  Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
+  "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
+  controller of their own. These drives (and their companion
+  controllers) are also supported if you say Y here.
+
+  If you have a special controller (such as the CMS FC-10, FC-20,
+  Mountain Mach-II, or any controller that is based on the Intel 82078
+  FDC like the high speed controllers by Seagate and Exabyte and
+  Iomega's "Ditto Dash") you must configure it by selecting the
+  appropriate entries from the "Floppy tape controllers" sub-menu
+  below and possibly modify the default values for the IRQ and DMA
+  channel and the IO base in ftape's configuration menu.
+
+  If you want to use your floppy tape drive on a PCI-bus based system,
+  please read the file <file:drivers/char/ftape/README.PCI>.
+
+  The ftape kernel driver is also available as a runtime loadable
+  module ( = code which can be inserted in and removed from the
+  running kernel whenever you want). If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>. The
+  module will be called ftape.o.
+
+  Note that the Ftape-HOWTO is out of date (sorry) and documents the
+  older version 2.08 of this software but still contains useful
+  information.  There is a web page with more recent documentation at
+  <http://www.instmath.rwth-aachen.de/~heine/ftape/>.  This page
+  always contains the latest release of the ftape driver and useful
+  information (backup software, ftape related patches and
+  documentation, FAQ).  Note that the file system interface has
+  changed quite a bit compared to previous versions of ftape.  Please
+  read <file:Documentation/ftape.txt>.
+
+CONFIG_DTLK
+  This driver is for the DoubleTalk PC, a speech synthesizer
+  manufactured by RC Systems (<http://www.rcsys.com/>).  It is also
+  called the `internal DoubleTalk'.  If you want to compile this as a
+  module ( = code which can be inserted in and removed from the
+  running kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>. The module will be called dtlk.o.
+
+CONFIG_R3964
+  This driver allows synchronous communication with devices using the
+  Siemens R3964 packet protocol. Unless you are dealing with special
+  hardware like PLCs, you are unlikely to need this.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  n_r3964.o.
+
+  If unsure, say N.
+
+CONFIG_APPLICOM
+  This driver provides the kernel-side support for the intelligent
+  fieldbus cards made by Applicom International. More information
+  about these cards can be found on the WWW at the address
+  <http://www.applicom-int.com/>, or by email from David Woodhouse
+  <dwmw2@infradead.org>.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  applicom.o.
+
+  If unsure, say N.
+
+CONFIG_SONYPI
+  This driver enables access to the Sony Programmable I/O Control
+  Device which can be found in many (all ?) Sony Vaio laptops.
+
+  If you have one of those laptops, read
+  <file:Documentation/sonypi.txt>, and say Y or M here.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called sonypi.o.
+
+CONFIG_INTEL_RNG
+  This driver provides kernel-side support for the Random Number
+  Generator hardware found on Intel i8xx-based motherboards.
+
+  Both a character driver, used to read() entropy data, and a timer
+  function which automatically adds entropy directly into the
+  kernel pool, are exported by this driver.
+
+  To compile this driver as a module ( = code which can be inserted in
+  and removed from the running kernel whenever you want), say M here
+  and read <file:Documentation/modules.txt>. The module will be called
+  i810_rng.o.
+
+  If unsure, say N.
+
+CONFIG_WATCHDOG_NOWAYOUT
+  The default watchdog behaviour (which you get if you say N here) is
+  to stop the timer if the process managing it closes the file
+  /dev/watchdog. It's always remotely possible that this process might
+  get killed. If you say Y here, the watchdog cannot be stopped once
+  it has been started.
+
+CONFIG_WDT
+  If you have a WDT500P or WDT501P watchdog board, say Y here,
+  otherwise N. It is not possible to probe for this board, which means
+  that you have to inform the kernel about the IO port and IRQ using
+  the "wdt=" kernel option (try "man bootparam" or see the
+  documentation of your boot loader (lilo or loadlin) about how to
+  pass options to the kernel at boot time).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called wdt.o.
+
+CONFIG_WDTPCI
+  If you have a PCI WDT500/501 watchdog board, say Y here, otherwise
+  N.  It is not possible to probe for this board, which means that you
+  have to inform the kernel about the IO port and IRQ using the "wdt="
+  kernel option (try "man bootparam" or see the documentation of your
+  boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time).
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called wdt_pci.o.
+
+CONFIG_WDT_501
+  Saying Y here and creating a character special file /dev/temperature
+  with major number 10 and minor number 131 ("man mknod") will give
+  you a thermometer inside your computer: reading from
+  /dev/temperature yields one byte, the temperature in degrees
+  Fahrenheit. This works only if you have a WDT501P watchdog board
+  installed.
+
+CONFIG_WDT_501_FAN
+  Enable the Fan Tachometer on the WDT501. Only do this if you have a
+  fan tachometer actually set up.
+
+CONFIG_SOFT_WATCHDOG
+  A software monitoring watchdog. This will fail to reboot your system
+  from some situations that the hardware watchdog will recover
+  from. Equally it's a lot cheaper to install.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called
+   softdog.o.
+
+CONFIG_PCWATCHDOG
+  This is the driver for the Berkshire Products PC Watchdog card.
+  This card simply watches your kernel to make sure it doesn't freeze,
+  and if it does, it reboots your computer after a certain amount of
+  time. This driver is like the WDT501 driver but for different
+  hardware. Please read <file:Documentation/pcwd-watchdog.txt>. The PC
+  watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called pcwd.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+  Most people will say N.
+
+CONFIG_ACQUIRE_WDT
+  This is the driver for the hardware watchdog on the PSC-6x86 Single
+  Board Computer produced by Acquire Inc (and others).  This watchdog
+  simply watches your kernel to make sure it doesn't freeze, and if
+  it does, it reboots your computer after a certain amount of time.
+
+  This driver is like the WDT501 driver but for different hardware.
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called pscwdt.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  Most
+  people will say N.
+
+CONFIG_ADVANTECH_WDT
+  If you are configuring a Linux kernel for the Advantech single-board
+  computer, say `Y' here to support its built-in watchdog timer
+  feature.  See the help for CONFIG_WATCHDOG for discussion.
+
+CONFIG_W83877F_WDT
+  This is the driver for the hardware watchdog on the W83877F chipset
+  as used in EMACS PC-104 motherboards (and likely others).  This
+  watchdog simply watches your kernel to make sure it doesn't freeze,
+  and if it does, it reboots your computer after a certain amount of
+  time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called mixcomwd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  Most
+  people will say N.
+
+CONFIG_IB700_WDT
+  This is the driver for the hardware watchdog on the IB700 Single
+  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+  simply watches your kernel to make sure it doesn't freeze, and if
+  it does, it reboots your computer after a certain amount of time.
+
+  This driver is like the WDT501 driver but for slightly different hardware.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called ib700wdt.o. If you want to compile it as a
+  module, say M here and read Documentation/modules.txt. Most people
+  will say N.
+
+CONFIG_MIXCOMWD
+  This is a driver for the Mixcom hardware watchdog cards.  This
+  watchdog simply watches your kernel to make sure it doesn't freeze,
+  and if it does, it reboots your computer after a certain amount of
+  time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called mixcomwd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  Most
+  people will say N.
+
+CONFIG_MACHZ_WDT
+  If you are using a ZF Micro MachZ processor, say Y here, otherwise
+  N.  This is the driver for the watchdog timer builtin on that
+  processor using ZF-Logic interface.  This watchdog simply watches
+  your kernel to make sure it doesn't freeze, and if it does, it
+  reboots your computer after a certain amount of time.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called machzwd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_60XX_WDT
+ This driver can be used with the watchdog timer found on some
+ single board computers, namely the 6010 PII based computer.
+ It may well work with other cards.  It reads port 0x443 to enable
+ and re-set the watchdog timer, and reads port 0x45 to disable
+ the watchdog.  If you have a card that behave in similar ways,
+ you can probably make this driver work with your card as well.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module.  The module will be called sbc60xxwdt.o.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_H8
+  The Hitachi H8/337 is a microcontroller used to deal with the power
+  and thermal environment. If you say Y here, you will be able to
+  communicate with it via a character special device.
+
+  If unsure, say N.
+
+CONFIG_NVRAM
+  If you say Y here and create a character special file /dev/nvram
+  with major number 10 and minor number 144 using mknod ("man mknod"),
+  you get read and write access to the 50 bytes of non-volatile memory
+  in the real time clock (RTC), which is contained in every PC and
+  most Ataris.
+
+  This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
+  on Ataris. /dev/nvram may be used to view settings there, or to
+  change them (with some utility). It could also be used to frequently
+  save a few bits of very important data that may not be lost over
+  power-off and for which writing to disk is too insecure. Note
+  however that most NVRAM space in a PC belongs to the BIOS and you
+  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+  for a guide to the use of CMOS bytes by your BIOS.
+
+  On Atari machines, /dev/nvram is always configured and does not need
+  to be selected.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called nvram.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ATOMWIDE_SERIAL
+  If you have an Atomwide Serial card for an Acorn system, say Y to
+  this option.  The driver can handle 1, 2, or 3 port cards.
+  If unsure, say N.
+
+CONFIG_DUALSP_SERIAL
+  If you have the Serial Port's dual serial card for an Acorn system,
+  say Y to this option.  If unsure, say N.
+
+CONFIG_NWBUTTON
+  If you say Y here and create a character device node /dev/nwbutton
+  with major and minor numbers 10 and 158 ("man mknod"), then every
+  time the orange button is pressed a number of times, the number of
+  times the button was pressed will be written to that device.
+
+  This is most useful for applications, as yet unwritten, which
+  perform actions based on how many times the button is pressed in a
+  row.
+
+  Do not hold the button down for too long, as the driver does not
+  alter the behaviour of the hardware reset circuitry attached to the
+  button; it will still execute a hard reset if the button is held
+  down for longer than approximately five seconds.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  nwbutton.o.
+
+  Most people will answer Y to this question and "Reboot Using Button"
+  below to be able to initiate a system shutdown from the button.
+
+CONFIG_NWBUTTON_REBOOT
+  If you say Y here, then you will be able to initiate a system
+  shutdown and reboot by pressing the orange button a number of times.
+  The number of presses to initiate the shutdown is two by default,
+  but this can be altered by modifying the value of NUM_PRESSES_REBOOT
+  in nwbutton.h and recompiling the driver or, if you compile the
+  driver as a module, you can specify the number of presses at load
+  time with "insmod button reboot_count=<something>".
+
+CONFIG_A2232
+  This option supports the 2232 7-port serial card shipped with the
+  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+  ports were connected with 8 pin DIN connectors on the card bracket,
+  for which 8 pin to DB25 adapters were supplied. The card also had
+  jumpers internally to toggle various pinning configurations.
+
+  This driver can be built as a module; but then "generic_serial.o"
+  will also be built as a module. This has to be loaded before
+  "ser_a2232.o". If you want to do this, answer M here and read
+  "<file:Documentation/modules.txt>".
+
+CONFIG_DS1620
+  Say Y here to include support for the thermal management hardware
+  found in the NetWinder. This driver allows the user to control the
+  temperature set points and to read the current temperature.
+
+  It is also possible to say M here to build it as a module (ds1620.o)
+  It is recommended to be used on a NetWinder, but it is not a
+  necessity.
+
+CONFIG_SERIAL_21285
+  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
+  PCI bridge you can enable its onboard serial port by enabling this
+  option. The device has major ID 4, minor 64.
+
+CONFIG_SERIAL_21285_CONSOLE
+  If you have enabled the serial port on the 21285 footbridge you can
+  make it the console by answering Y to this option.
+
+CONFIG_NWFLASH
+  If you say Y here and create a character device /dev/flash with
+  major 10 and minor 160 you can manipulate the flash ROM containing
+  the NetWinder firmware. Be careful as accidentally overwriting the
+  flash contents can render your computer unbootable. On no account
+  allow random users access to this device. :-)
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called nwflash.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you're not sure, say N.
+
+CONFIG_21285_WATCHDOG
+  The Intel Footbridge chip contains a builtin watchdog circuit. Say Y
+  here if you wish to use this. Alternatively say M to compile the
+  driver as a module, which will be called wdt285.o.
+
+  This driver does not work on all machines. In particular, early CATS
+  boards have hardware problems that will cause the machine to simply
+  lock up if the watchdog fires.
+
+  "If in doubt, leave it out" - say N.
+
+CONFIG_977_WATCHDOG
+  Say Y here to include support for the WB977 watchdog included in
+  NetWinder machines. Alternatively say M to compile the driver as
+  a module, which will be called wdt977.o.
+
+  Not sure? It's safe to say N.
+
diff -urN linux-2.5.3-pre4/drivers/char/drm/Config.help linux/drivers/char/drm/Config.help
--- linux-2.5.3-pre4/drivers/char/drm/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/char/drm/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,39 @@
+CONFIG_DRM
+  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+  introduced in XFree86 4.0. If you say Y here, you need to select
+  the module that's right for your graphics card from the list below.
+  These modules provide support for synchronization, security, and
+  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+  details.  You should also select and configure AGP
+  (/dev/agpgart) support.
+
+CONFIG_DRM_TDFX
+  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+  graphics card.  If M is selected, the module will be called tdfx.o.
+
+CONFIG_DRM_GAMMA
+  Choose this option if you have a 3dlabs GMX 2000 graphics card.
+  If M is selected, the module will be called gamma.o.
+
+CONFIG_DRM_R128
+  Choose this option if you have an ATI Rage 128 graphics card.  If M
+  is selected, the module will be called r128.o.  AGP support for
+  this card is strongly suggested (unless you have a PCI version).
+
+CONFIG_DRM_RADEON
+  Choose this option if you have an ATI Radeon graphics card.  There
+  are both PCI and AGP versions.  You don't need to choose this to
+  run the Radeon in plain VGA mode.  There is a product page at
+  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+  If M is selected, the module will be called radeon.o.
+
+CONFIG_DRM_I810
+  Choose this option if you have an Intel I810 graphics card.  If M is
+  selected, the module will be called i810.o.  AGP support is required
+  for this driver to work.
+
+CONFIG_DRM_MGA
+  Choose this option if you have a Matrox G200, G400 or G450 graphics
+  card.  If M is selected, the module will be called mga.o.  AGP
+  support is required for this driver to work.
+
diff -urN linux-2.5.3-pre4/drivers/char/ftape/Config.help linux/drivers/char/ftape/Config.help
--- linux-2.5.3-pre4/drivers/char/ftape/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/char/ftape/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,183 @@
+CONFIG_ZFTAPE
+  Normally, you want to say Y or M. DON'T say N here or you
+  WON'T BE ABLE TO USE YOUR FLOPPY TAPE DRIVE.
+
+  The ftape module itself no longer contains the routines necessary
+  to interface with the kernel VFS layer (i.e. to actually write data
+  to and read data from the tape drive).  Instead the file system
+  interface (i.e. the hardware independent part of the driver) has
+  been moved to a separate module.
+
+  If you say M zftape will be compiled as a runtime loadable
+  module ( = code which can be inserted in and removed from the
+  running kernel whenever you want).  In this case you should read
+  <file:Documentation/modules.txt>.  The module will be called
+  zftape.o.
+
+  Regardless of whether you say Y or M here, an additional runtime
+  loadable module called `zft-compressor.o' which contains code to
+  support user transparent on-the-fly compression based on Ross
+  William's lzrw3 algorithm will be produced.  If you have enabled the
+  kernel module loader (i.e. have said Y to "Kernel module loader
+  support", above) then `zft-compressor.o' will be loaded
+  automatically by zftape when needed.
+
+  Despite its name, zftape does NOT use compression by default.  The
+  file <file:Documentation/ftape.txt> contains a short description of
+  the most important changes in the file system interface compared to
+  previous versions of ftape.  The ftape home page
+  <http://www.instmath.rwth-aachen.de/~heine/ftape/> contains
+  further information.
+
+  IMPORTANT NOTE: zftape can read archives created by previous
+  versions of ftape and provide file mark support (i.e. fast skipping
+  between tape archives) but previous version of ftape will lack file
+  mark support when reading archives produced by zftape.
+
+CONFIG_ZFT_DFLT_BLK_SZ
+  If unsure leave this at its default value, i.e. 10240. Note that
+  you specify only the default block size here. The block size can be
+  changed at run time using the MTSETBLK tape operation with the
+  MTIOCTOP ioctl (i.e. with "mt -f /dev/qft0 setblk #BLKSZ" from the
+  shell command line).
+
+  The probably most striking difference between zftape and previous
+  versions of ftape is the fact that all data must be written or read
+  in multiples of a fixed block size. The block size defaults to
+  10240 which is what GNU tar uses. The values for the block size
+  should be either 1 or multiples of 1024 up to a maximum value of
+  63488 (i.e. 62 K). If you specify `1' then zftape's builtin
+  compression will be disabled.
+
+  Reasonable values are `10240' (GNU tar's default block size),
+  `5120' (afio's default block size), `32768' (default block size some
+  backup programs assume for SCSI tape drives) or `1' (no restriction
+  on block size, but disables builtin compression).
+
+CONFIG_FT_NR_BUFFERS
+  Please leave this at `3' unless you REALLY know what you are doing.
+  It is not necessary to change this value. Values below 3 make the
+  proper use of ftape impossible, values greater than 3 are a waste of
+  memory. You can change the amount of DMA memory used by ftape at
+  runtime with "mt -f /dev/qft0 setdrvbuffer #NUMBUFFERS". Each buffer
+  wastes 32 KB of memory. Please note that this memory cannot be
+  swapped out.
+
+CONFIG_FT_PROC_FS
+  Optional. Saying Y will result in creation of a directory
+  `/proc/ftape' under the /proc file system. The files can be viewed
+  with your favorite pager (i.e. use "more /proc/ftape/history" or
+  "less /proc/ftape/history" or simply "cat /proc/ftape/history"). The
+  file will contain some status information about the inserted
+  cartridge, the kernel driver, your tape drive, the floppy disk
+  controller and the error history for the most recent use of the
+  kernel driver. Saying Y will enlarge the size of the ftape driver
+  by approximately 2 KB.
+
+  WARNING: When compiling ftape as a module (i.e. saying M to "Floppy
+  tape drive") it is dangerous to use ftape's /proc file system
+  interface. Accessing `/proc/ftape' while the module is unloaded will
+  result in a kernel Oops. This cannot be fixed from inside ftape.
+
+CONFIG_FT_FDC_BASE
+  You don't need to specify a value if the following default
+  settings for the base IO address are correct:
+  <<< MACH-2     : 0x1E0 >>>
+  <<< FC-10/FC-20: 0x180 >>>
+  <<< Secondary  : 0x370 >>>
+  Secondary refers to a secondary FDC controller like the "high speed"
+  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
+  Please make sure that the setting for the IO base address
+  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
+  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
+  successfully using the tape drive with another operating system then
+  you definitely should use the same settings for the IO base that has
+  proven to work with that other OS.
+
+  Note that this menu lets you specify only the default setting for
+  the IO base. The hardware configuration can be changed at boot time
+  (when ftape is compiled into the kernel, i.e. if you specified Y to
+  "Floppy tape drive") or module load time (i.e. if you have said M to
+  "Floppy tape drive").
+
+  Please read also the file <file:Documentation/ftape.txt> which
+  contains a short description of the parameters that can be set at
+  boot or load time.
+
+CONFIG_FT_FDC_IRQ
+  You don't need to specify a value if the following default
+  settings for the interrupt channel are correct:
+  <<< MACH-2     : 6 >>>
+  <<< FC-10/FC-20: 9 >>>
+  <<< Secondary  : 6 >>>
+  Secondary refers to secondary a FDC controller like the "high speed"
+  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
+  Please make sure that the setting for the IO base address
+  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
+  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
+  successfully using the tape drive with another operating system then
+  you definitely should use the same settings for the IO base that has
+  proven to work with that other OS.
+
+  Note that this menu lets you specify only the default setting for
+  the IRQ channel. The hardware configuration can be changed at boot
+  time (when ftape is compiled into the kernel, i.e. if you said Y to
+  "Floppy tape drive") or module load time (i.e. if you said M to
+  "Floppy tape drive").
+
+  Please read also the file <file:Documentation/ftape.txt> which
+  contains a short description of the parameters that can be set at
+  boot or load time.
+
+CONFIG_FT_FDC_DMA
+  You don't need to specify a value if the following default
+  settings for the DMA channel are correct:
+  <<< MACH-2     : 2 >>>
+  <<< FC-10/FC-20: 3 >>>
+  <<< Secondary  : 2 >>>
+  Secondary refers to a secondary FDC controller like the "high speed"
+  controllers delivered by Seagate or Exabyte or Iomega's Ditto Dash.
+  Please make sure that the setting for the IO base address
+  specified here is correct. USE THE MANUAL OF YOUR TAPE DRIVE OR
+  CONTROLLER CARD TO DETERMINE THE CORRECT SETTING. If you are already
+  successfully using the tape drive with another operating system then
+  you definitely should use the same settings for the IO base that has
+  proven to work with that other OS.
+
+  Note that this menu lets you specify only the default setting for
+  the DMA channel. The hardware configuration can be changed at boot
+  time (when ftape is compiled into the kernel, i.e. if you said Y to
+  "Floppy tape drive") or module load time (i.e. if you said M to
+  "Floppy tape drive").
+
+  Please read also the file <file:Documentation/ftape.txt> which
+  contains a short description of the parameters that can be set at
+  boot or load time.
+
+CONFIG_FT_FDC_THR
+  Set the FIFO threshold of the FDC. If this is higher the DMA
+  controller may serve the FDC after a higher latency time. If this is
+  lower, fewer DMA transfers occur leading to less bus contention.
+  You may try to tune this if ftape annoys you with "reduced data
+  rate because of excessive overrun errors" messages. However, this
+  doesn't seem to have too much effect.
+
+  If unsure, don't touch the initial value, i.e. leave it at "8".
+
+CONFIG_FT_FDC_MAX_RATE
+  With some motherboard/FDC combinations ftape will not be able to
+  run your FDC/tape drive combination at the highest available
+  speed. If this is the case you'll encounter "reduced data rate
+  because of excessive overrun errors" messages and lots of retries
+  before ftape finally decides to reduce the data rate.
+
+  In this case it might be desirable to tell ftape beforehand that
+  it need not try to run the tape drive at the highest available
+  speed. If unsure, leave this disabled, i.e. leave it at 2000
+  bits/sec.
+
+CONFIG_FT_ALPHA_CLOCK
+  On some DEC Alpha machines the CPU clock frequency cannot be
+  determined automatically, so you need to specify it here ONLY if
+  running a DEC Alpha, otherwise this setting has no effect.
+
diff -urN linux-2.5.3-pre4/drivers/char/joystick/Config.help linux/drivers/char/joystick/Config.help
--- linux-2.5.3-pre4/drivers/char/joystick/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/char/joystick/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,300 @@
+CONFIG_INPUT_GAMEPORT
+  Gameport support is for the standard 15-pin PC gameport.  If you
+  have a joystick, gamepad, gameport card, a soundcard with a gameport
+  or anything else that uses the gameport, say Y or M here and also to
+  at least one of the hardware specific drivers.
+  Please read the file <file:Documentation/input/joystick.txt> which
+  contains more information and the location of the joystick package
+  that you'll need if you use the gameport with a joystick.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gameport.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_NS558
+  Say Y here if you have an ISA or PnP gameport.
+  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ns558.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_LIGHTNING
+  Say Y here if you have a PDPI Lightning 4 gamecard. For more
+  information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called lightning.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_CS461X
+  Say Y here if you have a Cirrus CS461x aka "Crystal SoundFusion"
+  PCI audio accelerator.  A product page for the CS4614 is at
+  <http://www.cirrus.com/design/products/overview/index.cfm?ProductID=40>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cs461x.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_PCIGAME
+  Say Y here if you have a Trident 4DWave DX/NX or Aureal Vortex 1/2
+  card. For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pcigame.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_EMU10K1
+  Say Y here if you have a SoundBlaster Live! card and want to use
+  its gameport.  For more information on how to use the driver
+  please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called emu10k1-gp.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_ANALOG
+  Say Y here if you have a controller that connects to the PC
+  gameport.  This supports many different types, including joysticks
+  with throttle control, with rudders, or with extensions like
+  additional hats and buttons compatible with CH Flightstick Pro,
+  ThrustMaster FCS, 6 and 8 button gamepads, or Saitek Cyborg
+  joysticks.  For more information on how to use the driver please
+  read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called analog.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_A3D
+  Say Y here if you have an FPGaming or MadCatz controller using the
+  A3D protocol over the PC gameport.  For more information on how to
+  use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called a3d.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_ADI
+  Say Y here if you have a Logitech controller using the ADI
+  protocol over the PC gameport. For more information on how to use
+  the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called adi.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_COBRA
+  Say Y here if you have a Creative Labs Blaster Cobra gamepad.
+  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cobra.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_GF2K
+  Say Y here if you have a Genius Flight2000 or MaxFighter digitally
+  communicating joystick or gamepad.  For more information on how to
+  use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gf2k.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_GRIP
+  Say Y here if you have a Gravis controller using the GrIP protocol
+  over the PC gameport.  For more information on how to use the driver
+  please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called grip.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_INTERACT
+  Say Y hereif you have an InterAct gameport or joystick
+  communicating digitally over the gameport.  For more information on
+  how to use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called interact.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_TMDC
+  Say Y here if you have a ThrustMaster controller using the
+  DirectConnect (BSP) protocol over the PC gameport.  For more
+  information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tmdc.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_SIDEWINDER
+  Say Y here if you have a Microsoft controller using the Digital
+  Overdrive protocol over PC gameport.  For more information on how to
+  use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sidewinder.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_SERIO
+  Say Y here and to the Serial port input line discipline option if
+  you plan to use a joystick that communicates over the serial (COM)
+  port.  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sidewinder.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_SERPORT
+  Say Y here if you plan to use a joystick that communicates over the
+  serial (COM) port.  For more information on how to use the driver
+  please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called serport.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_WARRIOR
+  Say Y here if you have a Logitech WingMan Warrior joystick connected
+  to your computer's serial port.  For more information on how to use
+  the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called warrior.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_MAGELLAN
+  Say Y here if you have a Magellan or Space Mouse 6DOF controller
+  connected to your computer's serial port.  For more information on
+  how to use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called magellan.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_SPACEORB
+  Say Y here if you have a SpaceOrb 360 or SpaceBall Avenger 6DOF
+  controller connected to your computer's serial port.  For more
+  information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called spaceorb.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_SPACEBALL
+  Say Y here if you have a SpaceTec SpaceBall 4000 FLX controller
+  connected to your computer's serial port.  For more information on
+  how to use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called spaceball.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_STINGER
+  Say Y here if you have a Gravis Stinger connected to one of your
+  serial ports.  For more information on how to use the driver please
+  read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called stinger.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_IFORCE_232
+  Say Y here if you have an I-Force joystick or steering wheel
+  connected to your serial (COM) port.  For more information on how
+  to use the driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called iforce.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_IFORCE_USB
+  Say Y here if you have an I-Force joystick or steering wheel
+  connected to your USB port.  For more information on how to use the
+  driver please read <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called iforce.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_DB9
+  Say Y here if you have a Sega Master System gamepad, Sega Genesis
+  gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
+  Commodore, Amstrad CPC joystick connected to your parallel port.
+  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt> and
+  <file:Documentation/input/joystick-parport.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called db9.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_GAMECON
+  Say Y here if you have a Nintendo Entertainment System gamepad,
+  Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad,
+  Sony PlayStation gamepad or a Multisystem -- Atari, Amiga,
+  Commodore, Amstrad CPC joystick connected to your parallel port.
+  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt> and
+  <file:Documentation/input/joystick-parport.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gamecon.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_TURBOGRAFX
+  Say Y here if you have the TurboGraFX interface by Steffen Schwenke,
+  and want to use it with Multisystem -- Atari, Amiga, Commodore,
+  Amstrad CPC joystick.  For more information on how to use the driver
+  please read <file:Documentation/input/joystick.txt> and
+  <file:Documentation/input/joystick-parport.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called turbografx.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_AMIJOY
+  Say Y here if you have an Amiga with a digital joystick connected
+  to it.  For more information on how to use the driver please read
+  <file:Documentation/input/joystick.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called joy-amiga.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/char/pcmcia/Config.help linux/drivers/char/pcmcia/Config.help
--- linux-2.5.3-pre4/drivers/char/pcmcia/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/char/pcmcia/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,12 @@
+CONFIG_PCMCIA_SERIAL_CS
+  Say Y here to enable support for 16-bit PCMCIA serial devices,
+  including serial port cards, modems, and the modem functions of
+  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+  credit-card size devices often used with laptops.)
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called serial_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/char/shwdt.c linux/drivers/char/shwdt.c
--- linux-2.5.3-pre4/drivers/char/shwdt.c	Fri Jan  4 21:19:54 2002
+++ linux/drivers/char/shwdt.c	Thu Jan 24 12:35:34 2002
@@ -19,7 +19,6 @@
 #include <linux/watchdog.h>
 #include <linux/reboot.h>
 #include <linux/notifier.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 
 #include <asm/io.h>
@@ -47,18 +46,47 @@
 #define WTCSR_CKS1	0x02
 #define WTCSR_CKS0	0x01
 
-#define WTCSR_CKS	0x07
-#define WTCSR_CKS_1	0x00
-#define WTCSR_CKS_4	0x01
-#define WTCSR_CKS_16	0x02
-#define WTCSR_CKS_32	0x03
-#define WTCSR_CKS_64	0x04
-#define WTCSR_CKS_256	0x05
-#define WTCSR_CKS_1024	0x06
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
 #define WTCSR_CKS_4096	0x07
 
-static int sh_is_open = 0;
+/*
+ * Default clock division ratio is 5.25 msecs. Overload this at module load
+ * time. Any value not in the msec range will default to a timeout of one
+ * jiffy, which exceeds the usec overflow periods.
+ */
+static int clock_division_ratio = WTCSR_CKS_4096;
+
+#define msecs_to_jiffies(msecs)	(jiffies + ((HZ * msecs + 999) / 1000))
+#define next_ping_period(cks)	msecs_to_jiffies(cks - 4)
+#define user_ping_period(cks)	(next_ping_period(cks) * 10)
+
+static unsigned long sh_is_open = 0;
 static struct watchdog_info sh_wdt_info;
+static struct timer_list timer;
+static unsigned long next_heartbeat;
 
 /**
  *	sh_wdt_write_cnt - Write to Counter
@@ -93,6 +121,10 @@
  */
 static void sh_wdt_start(void)
 {
+	timer.expires = next_ping_period(clock_division_ratio);
+	next_heartbeat = user_ping_period(clock_division_ratio);
+	add_timer(&timer);
+
 	sh_wdt_write_csr(WTCSR_WT | WTCSR_CKS_4096);
 	sh_wdt_write_cnt(0);
 	sh_wdt_write_csr((ctrl_inb(WTCSR) | WTCSR_TME));
@@ -105,6 +137,8 @@
  */
 static void sh_wdt_stop(void)
 {
+	del_timer(&timer);
+
 	sh_wdt_write_csr((ctrl_inb(WTCSR) & ~WTCSR_TME));
 }
 
@@ -117,8 +151,13 @@
  */
 static void sh_wdt_ping(unsigned long data)
 {
-	sh_wdt_write_csr((ctrl_inb(WTCSR) & ~WTCSR_IOVF));
-	sh_wdt_write_cnt(0);
+	if (time_before(jiffies, next_heartbeat)) {
+		sh_wdt_write_csr((ctrl_inb(WTCSR) & ~WTCSR_IOVF));
+		sh_wdt_write_cnt(0);
+
+		timer.expires = next_ping_period(clock_division_ratio);
+		add_timer(&timer);
+	}
 }
 
 /**
@@ -133,14 +172,12 @@
 {
 	switch (minor(inode->i_rdev)) {
 		case WATCHDOG_MINOR:
-			if (sh_is_open) {
+			if (test_and_set_bit(0, &sh_is_open))
 				return -EBUSY;
-			}
 
-			sh_is_open = 1;
 			sh_wdt_start();
 
-			return 0;
+			break;
 		default:
 			return -ENODEV;
 	}
@@ -158,17 +195,13 @@
  */
 static int sh_wdt_close(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	
 	if (minor(inode->i_rdev) == WATCHDOG_MINOR) {
 #ifndef CONFIG_WATCHDOG_NOWAYOUT
 		sh_wdt_stop();
 #endif
-		sh_is_open = 0;
+		clear_bit(0, &sh_is_open);
 	}
 	
-	unlock_kernel();
-
 	return 0;
 }
 
@@ -206,7 +239,7 @@
 		return -ESPIPE;
 
 	if (count) {
-		sh_wdt_ping(0);
+		next_heartbeat = user_ping_period(clock_division_ratio);
 		return 1;
 	}
 
@@ -245,7 +278,7 @@
 
 			break;
 		case WDIOC_KEEPALIVE:
-			sh_wdt_ping(0);
+			next_heartbeat = user_ping_period(clock_division_ratio);
 			
 			break;
 		default:
@@ -336,6 +369,10 @@
 		return -EINVAL;
 	}
 
+	init_timer(&timer);
+	timer.function = sh_wdt_ping;
+	timer.data = 0;
+
 	return 0;
 }
 
@@ -358,6 +395,8 @@
 MODULE_AUTHOR("Paul Mundt <lethal@chaoticdreams.org>");
 MODULE_DESCRIPTION("SH 3/4 watchdog driver");
 MODULE_LICENSE("GPL");
+MODULE_PARM(clock_division_ratio, "i");
+MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). Defaults to 0x7.");
 
 module_init(sh_wdt_init);
 module_exit(sh_wdt_exit);
diff -urN linux-2.5.3-pre4/drivers/fc4/Config.help linux/drivers/fc4/Config.help
--- linux-2.5.3-pre4/drivers/fc4/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/fc4/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,57 @@
+CONFIG_FC4
+  Fibre Channel is a high speed serial protocol mainly used to
+  connect large storage devices to the computer; it is compatible with
+  and intended to replace SCSI.
+
+  This is an experimental support for storage arrays connected to your
+  computer using optical fibre cables and the "X3.269-199X Fibre
+  Channel Protocol for SCSI" specification. If you want to use this,
+  you need to say Y here and to "SCSI support" as well as to the
+  drivers for the storage array itself and for the interface adapter
+  such as SOC or SOC+. This subsystem could even serve for IP
+  networking, with some code extensions.
+
+  If unsure, say N.
+
+CONFIG_FC4_SOC
+  Serial Optical Channel is an interface card with one or two Fibre
+  Optic ports, each of which can be connected to a disk array. Note
+  that if you have older firmware in the card, you'll need the
+  microcode from the Solaris driver to make it work.
+
+  This support is also available as a module called soc.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_FC4_SOCAL
+  Serial Optical Channel Plus is an interface card with up to two
+  Fibre Optic ports. This card supports FC Arbitrated Loop (usually
+  A5000 or internal FC disks in E[3-6]000 machines through the
+  Interface Board). You'll probably need the microcode from the
+  Solaris driver to make it work.
+
+  This support is also available as a module called socal.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_PLUTO
+  If you never bought a disk array made by Sun, go with N.
+
+  This support is also available as a module called pluto.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_FCAL
+  This driver drives FC-AL disks connected through a Fibre Channel
+  card using the drivers/fc4 layer (currently only SOCAL). The most
+  common is either A5000 array or internal disks in E[3-6]000
+  machines.
+
+  This support is also available as a module called fcal.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>. If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/hotplug/Config.help linux/drivers/hotplug/Config.help
--- linux-2.5.3-pre4/drivers/hotplug/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/hotplug/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,31 @@
+CONFIG_HOTPLUG_PCI
+  Say Y here if you have a motherboard with a PCI Hotplug controller.
+  This allows you to add and remove PCI cards while the machine is
+  powered up and running.  The file system pcihpfs must be mounted
+  in order to interact with any PCI Hotplug controllers.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pci_hotplug.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  When in doubt, say N.
+
+CONFIG_HOTPLUG_PCI_COMPAQ
+  Say Y here if you have a motherboard with a Compaq PCI Hotplug
+  controller.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cpqphp.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  When in doubt, say N.
+
+CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM
+  Say Y here if you have a Compaq server that has a PCI Hotplug
+  controller.  This will allow the PCI Hotplug driver to store the PCI
+  system configuration options in NVRAM.
+
+  When in doubt, say N.
+
diff -urN linux-2.5.3-pre4/drivers/i2c/Config.help linux/drivers/i2c/Config.help
--- linux-2.5.3-pre4/drivers/i2c/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/i2c/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,101 @@
+CONFIG_I2C
+  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
+  many micro controller applications and developed by Philips.  SMBus,
+  or System Management Bus is a subset of the I2C protocol.  More
+  information is contained in the directory <file:Documentation/i2c/>,
+  especially in the file called "summary" there.
+
+  Both I2C and SMBus are supported here. You will need this for
+  hardware sensors support, and also for Video For Linux support.
+  Specifically, if you want to use a BT848 based frame grabber/overlay
+  boards under Linux, say Y here and also to "I2C bit-banging
+  interfaces", below.
+
+  If you want I2C support, you should say Y here and also to the
+  specific driver for your bus adapter(s) below.  If you say Y to
+  "/proc file system" below, you will then get a /proc interface which
+  is documented in <file:Documentation/i2c/proc-interface>.
+
+  This I2C support is also available as a module.  If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-core.o.
+
+CONFIG_I2C_ALGOBIT
+  This allows you to use a range of I2C adapters called bit-banging
+  adapters.  Say Y if you own an I2C adapter belonging to this class
+  and then say Y to the specific driver for you adapter below.
+
+  This support is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-algo-bit.o.
+
+CONFIG_I2C_PHILIPSPAR
+  This supports parallel-port I2C adapters made by Philips.  Say Y if
+  you own such an adapter.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-philips-par.o.
+
+  Note that if you want support for different parallel port devices,
+  life will be much easier if you compile them all as modules.
+
+CONFIG_I2C_ELV
+  This supports parallel-port I2C adapters called ELV.  Say Y if you
+  own such an adapter.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-elv.o.
+
+CONFIG_I2C_VELLEMAN
+  This supports the Velleman K9000 parallel-port I2C adapter.  Say Y
+  if you own such an adapter.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-velleman.o.
+
+CONFIG_I2C_ALGOPCF
+  This allows you to use a range of I2C adapters called PCF adapters.
+  Say Y if you own an I2C adapter belonging to this class and then say
+  Y to the specific driver for you adapter below.
+
+  This support is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-algo-pcf.o.
+
+CONFIG_I2C_ELEKTOR
+  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
+  such an adapter.
+
+  This driver is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-elektor.o.
+
+CONFIG_I2C_CHARDEV
+  Say Y here to use i2c-* device files, usually found in the /dev
+  directory on your system.  They make it possible to have user-space
+  programs use the I2C bus.  Information on how to do this is
+  contained in the file <file:Documentation/i2c/dev-interface>.
+
+  This code is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called i2c-dev.o.
+
+CONFIG_I2C_PROC
+  This provides support for i2c device entries in the /proc filesystem.
+  The entries will be found in /proc/sys/dev/sensors.
+
+  This code is also available as a module. If you want to compile
+  it as a module, say M here and read <file:Documentation/modules.txt>.
+  The module will be called i2c-proc.o.
+
diff -urN linux-2.5.3-pre4/drivers/ide/Config.help linux/drivers/ide/Config.help
--- linux-2.5.3-pre4/drivers/ide/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/ide/Config.help	Thu Jan 24 12:35:34 2002
@@ -0,0 +1,783 @@
+CONFIG_BLK_DEV_IDE
+  If you say Y here, you will use the full-featured IDE driver to
+  control up to ten ATA/IDE interfaces, each being able to serve a
+  "master" and a "slave" device, for a total of up to twenty ATA/IDE
+  disk/cdrom/tape/floppy drives.
+
+  Useful information about large (>540 MB) IDE disks, multiple
+  interfaces, what to do if ATA/IDE devices are not automatically
+  detected, sound card ATA/IDE ports, module support, and other
+  topics, is contained in <file:Documentation/ide.txt>. For detailed
+  information about hard drives, consult the Disk-HOWTO and the
+  Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  To fine-tune ATA/IDE drive/interface parameters for improved
+  performance, look for the hdparm package at
+  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/ide.txt>. The module will be called ide-mod.o.
+  Do not compile this driver as a module if your root file system (the
+  one containing the directory /) is located on an IDE device.
+
+  If you have one or more IDE drives, say Y or M here. If your system
+  has no IDE drives, or if memory requirements are really tight, you
+  could say N here, and select the "Old hard disk driver" below
+  instead to save about 13 KB of memory in the kernel.
+
+CONFIG_BLK_DEV_HD_ONLY
+  There are two drivers for MFM/RLL/IDE hard disks. Most people use
+  the newer enhanced driver, but this old one is still around for two
+  reasons. Some older systems have strange timing problems and seem to
+  work only with the old driver (which itself does not work with some
+  newer systems). The other reason is that the old driver is smaller,
+  since it lacks the enhanced functionality of the new one. This makes
+  it a good choice for systems with very tight memory restrictions, or
+  for systems with only older MFM/RLL/ESDI drives. Choosing the old
+  driver can save 13 KB or so of kernel memory.
+
+  If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
+  instead of this one. For more detailed information, read the
+  Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_BLK_DEV_HD_IDE
+  There are two drivers for MFM/RLL/IDE disks.  Most people use just
+  the new enhanced driver by itself.  This option however installs the
+  old hard disk driver to control the primary IDE/disk interface in
+  the system, leaving the new enhanced IDE driver to take care of only
+  the 2nd/3rd/4th IDE interfaces.  Doing this will prevent you from
+  having an IDE/ATAPI CD-ROM or tape drive connected to the primary
+  IDE interface.  Choosing this option may be useful for older systems
+  which have MFM/RLL/ESDI controller+drives at the primary port
+  address (0x1f0), along with IDE drives at the secondary/3rd/4th port
+  addresses.
+
+  Normally, just say N here; you will then use the new driver for all
+  4 interfaces.
+
+CONFIG_BLK_DEV_IDEDISK
+  This will include enhanced support for MFM/RLL/IDE hard disks.  If
+  you have a MFM/RLL/IDE disk, and there is no special reason to use
+  the old hard disk driver instead, say Y.  If you have an SCSI-only
+  system, you can say N here.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-disk.o.  Do not compile this driver as a module
+  if your root file system (the one containing the directory /) is
+  located on the IDE disk. If unsure, say Y.
+
+CONFIG_IDEDISK_MULTI_MODE
+  If you get this error, try to say Y here:
+
+  hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
+  hda: set_multmode: error=0x04 { DriveStatusError }
+
+  If in doubt, say N.
+
+CONFIG_BLK_DEV_IDECS
+  Support for outboard IDE disks, tape drives, and CD-ROM drives
+  connected through a  PCMCIA card.
+
+CONFIG_BLK_DEV_IDECD
+  If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
+  a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
+  SCSI protocol. Most new CD-ROM drives use ATAPI, including the
+  NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
+  double(2X) or better speed drives.
+
+  If you say Y here, the CD-ROM drive will be identified at boot time
+  along with other IDE devices, as "hdb" or "hdc", or something
+  similar (check the boot messages with dmesg). If this is your only
+  CD-ROM drive, you can say N to all other CD-ROM options, but be sure
+  to say Y or M to "ISO 9660 CD-ROM file system support".
+
+  Note that older versions of LILO (LInux LOader) cannot properly deal
+  with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
+  <ftp://brun.dyndns.org/pub/linux/lilo/>.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-cd.o.
+
+CONFIG_BLK_DEV_IDETAPE
+  If you have an IDE tape drive using the ATAPI protocol, say Y.
+  ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
+  similar to the SCSI protocol.  If you have an SCSI tape drive
+  however, you can say N here.
+
+  You should also say Y if you have an OnStream DI-30 tape drive; this
+  will not work with the SCSI protocol, until there is support for the
+  SC-30 and SC-50 versions.
+
+  If you say Y here, the tape drive will be identified at boot time
+  along with other IDE devices, as "hdb" or "hdc", or something
+  similar, and will be mapped to a character device such as "ht0"
+  (check the boot messages with dmesg).  Be sure to consult the
+  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
+  for usage information.
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-tape.o.
+
+CONFIG_BLK_DEV_IDEFLOPPY
+  If you have an IDE floppy drive which uses the ATAPI protocol,
+  answer Y.  ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
+  drives, similar to the SCSI protocol.
+
+  The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
+  this driver. For information about jumper settings and the question
+  of when a ZIP drive uses a partition table, see
+  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
+  (ATAPI PD-CD/CDR drives are not supported by this driver; support
+  for PD-CD/CDR drives is available if you answer Y to
+  "SCSI emulation support", below).
+
+  If you say Y here, the FLOPPY drive will be identified along with
+  other IDE devices, as "hdb" or "hdc", or something similar (check
+  the boot messages with dmesg).
+
+  If you want to compile the driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ide-floppy.o.
+
+CONFIG_BLK_DEV_IDESCSI
+  This will provide SCSI host adapter emulation for IDE ATAPI devices,
+  and will allow you to use a SCSI device driver instead of a native
+  ATAPI driver.
+
+  This is useful if you have an ATAPI device for which no native
+  driver has been written (for example, an ATAPI PD-CD or CDR drive);
+  you can then use this emulation together with an appropriate SCSI
+  device driver. In order to do this, say Y here and to "SCSI support"
+  and "SCSI generic support", below. You must then provide the kernel
+  command line "hdx=scsi" (try "man bootparam" or see the
+  documentation of your boot loader (lilo or loadlin) about how to
+  pass options to the kernel at boot time) for devices if you want the
+  native EIDE sub-drivers to skip over the native support, so that
+  this SCSI emulation can be used instead. This is required for use of
+  CD-RW's.
+
+  Note that this option does NOT allow you to attach SCSI devices to a
+  box that doesn't have a SCSI host adapter installed.
+
+  If both this SCSI emulation and native ATAPI support are compiled
+  into the kernel, the native support will be used.
+
+CONFIG_BLK_DEV_ISAPNP
+  If you have an ISA EIDE card that is PnP (Plug and Play) and
+  requires setup first before scanning for devices, say Y here.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_CMD640
+  The CMD-Technologies CMD640 IDE chip is used on many common 486 and
+  Pentium motherboards, usually in combination with a "Neptune" or
+  "SiS" chipset. Unfortunately, it has a number of rather nasty
+  design flaws that can cause severe data corruption under many common
+  conditions. Say Y here to include code which tries to automatically
+  detect and correct the problems under Linux. This option also
+  enables access to the secondary IDE ports in some CMD640 based
+  systems.
+
+  This driver will work automatically in PCI based systems (most new
+  systems have PCI slots). But if your system uses VESA local bus
+  (VLB) instead of PCI, you must also supply a kernel boot parameter
+  to enable the CMD640 bugfix/support: "ide0=cmd640_vlb". (Try "man
+  bootparam" or see the documentation of your boot loader about how to
+  pass options to the kernel.)
+
+  The CMD640 chip is also used on add-in cards by Acculogic, and on
+  the "CSA-6400E PCI to IDE controller" that some people have. For
+  details, read <file:Documentation/ide.txt>.
+
+CONFIG_BLK_DEV_CMD640_ENHANCED
+  This option includes support for setting/autotuning PIO modes and
+  prefetch on CMD640 IDE interfaces.  For details, read
+  <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+  and your BIOS does not already do this for you, then say Y here.
+  Otherwise say N.
+
+CONFIG_BLK_DEV_RZ1000
+  The PC-Technologies RZ1000 IDE chip is used on many common 486 and
+  Pentium motherboards, usually along with the "Neptune" chipset.
+  Unfortunately, it has a rather nasty design flaw that can cause
+  severe data corruption under many conditions. Say Y here to include
+  code which automatically detects and corrects the problem under
+  Linux. This may slow disk throughput by a few percent, but at least
+  things will operate 100% reliably.
+
+CONFIG_BLK_DEV_IDEPCI
+  Say Y here for PCI systems which use IDE drive(s).
+  This option helps the IDE driver to automatically detect and
+  configure all PCI-based IDE interfaces in your system.
+
+CONFIG_IDEPCI_SHARE_IRQ
+  Some ATA/IDE chipsets have hardware support which allows for
+  sharing a single IRQ with other cards. To enable support for
+  this in the ATA/IDE driver, say Y here.
+
+  It is safe to say Y to this question, in most cases.
+  If unsure, say N.
+
+CONFIG_BLK_DEV_IDEDMA_PCI
+  If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
+  is capable of bus-master DMA operation (most Pentium PCI systems),
+  you will want to say Y here to reduce CPU overhead. You can then use
+  the "hdparm" utility to enable DMA for drives for which it was not
+  enabled automatically. By default, DMA is not enabled automatically
+  for these drives, but you can change that by saying Y to the
+  following question "Use DMA by default when available". You can get
+  the latest version of the hdparm utility from
+  <ftp://ibiblio.org/pub/Linux/system/hardware/>.
+
+  Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
+  and the file <file:Documentation/ide.txt> for more information.
+
+  It is safe to say Y to this question.
+
+CONFIG_IDEDMA_NEW_DRIVE_LISTINGS
+  If you say Y here, the model and firmware revision of your drive
+  will be compared against a blacklist of buggy drives that claim to
+  be (U)DMA capable but aren't. This is a blanket on/off test with no
+  speed limit options.
+
+  Straight GNU GCC 2.7.3/2.8.X compilers are known to be safe;
+  whereas, many versions of EGCS have a problem and miscompile if you
+  say Y here.
+
+  If in doubt, say N.
+
+CONFIG_BLK_DEV_IDEDMA_TIMEOUT
+  If you say Y here, this is a NASTY UGLY HACK!
+
+  We have to issue an abort and requeue the request DMA engine got
+  turned off by a goofy ASIC, and we have to clean up the mess, and
+  here is as good as any.  Do it globally for all chipsets.
+
+  If in doubt, say N.
+
+CONFIG_BLK_DEV_OFFBOARD
+  Normally, IDE controllers built into the motherboard (on-board
+  controllers) are assigned to ide0 and ide1 while those on add-in PCI
+  cards (off-board controllers) are relegated to ide2 and ide3.
+  Answering Y here will allow you to reverse the situation, with
+  off-board controllers on ide0/1 and on-board controllers on ide2/3.
+  This can improve the usability of some boot managers such as lilo
+  when booting from a drive on an off-board controller.
+
+  If you say Y here, and you actually want to reverse the device scan
+  order as explained above, you also need to issue the kernel command
+  line option "ide=reverse". (Try "man bootparam" or see the
+  documentation of your boot loader (lilo or loadlin) about how to
+  pass options to the kernel at boot time.)
+
+  Note that, if you do this, the order of the hd* devices will be
+  rearranged which may require modification of fstab and other files.
+
+  If in doubt, say N.
+
+CONFIG_IDEDMA_PCI_AUTO
+  Prior to kernel version 2.1.112, Linux used to automatically use
+  DMA for IDE drives and chipsets which support it. Due to concerns
+  about a couple of cases where buggy hardware may have caused damage,
+  the default is now to NOT use DMA automatically. To revert to the
+  previous behaviour, say Y to this question.
+
+  If you suspect your hardware is at all flakey, say N here.
+  Do NOT email the IDE kernel people regarding this issue!
+
+  It is normally safe to answer Y to this question unless your
+  motherboard uses a VIA VP2 chipset, in which case you should say N.
+
+CONFIG_IDEDMA_IVB
+  There are unclear terms is ATA-4 and ATA-5 standards how certain
+  hardware (an 80c ribbon) should be detected. Different interpretations
+  of the standards have been released in hardware. This causes problems:
+  for example, a host with Ultra Mode 4 (or higher) will not run
+  in that mode with an 80c ribbon.
+
+  If you are experiencing compatibility or performance problems, you
+  MAY try to answering Y here. However, it does not necessarily solve
+  any of your problems, it could even cause more of them.
+
+  It is normally safe to answer Y; however, the default is N.
+
+CONFIG_IDEDMA_PCI_WIP
+  If you enable this you will be able to use and test highly
+  developmental projects. If you say N, the configurator will
+  simply skip those options.
+
+  It is SAFEST to say N to this question.
+
+CONFIG_BLK_DEV_ADMA
+  Please read the comments at the top of
+  <file:drivers/ide/ide-adma.c>.
+
+CONFIG_BLK_DEV_PDC_ADMA
+  Please read the comments at the top of <file:drivers/ide/ide-pci.c>.
+
+CONFIG_BLK_DEV_AEC62XX
+  This driver adds up to 4 more EIDE devices sharing a single
+  interrupt. This add-on card is a bootable PCI UDMA controller. In
+  order to get this card to initialize correctly in some cases, you
+  should say Y here, and preferably also to "Use DMA by default when
+  available".
+
+  The ATP850U/UF is an UltraDMA 33 chipset base.
+  The ATP860 is an UltraDMA 66 chipset base.
+  The ATP860M(acintosh) version is an UltraDMA 66 chipset base.
+
+  Please read the comments at the top of <file:drivers/ide/aec62xx.c>.
+  If you say Y here, then say Y to "Use DMA by default when available"
+  as well.
+
+CONFIG_AEC62XX_TUNING
+  Please read the comments at the top of <file:drivers/ide/aec62xx.c>.
+  If unsure, say N.
+
+CONFIG_BLK_DEV_ALI15X3
+  This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
+  onboard chipsets.  It also tests for Simplex mode and enables
+  normal dual channel support.
+
+  If you say Y here, you also need to say Y to "Use DMA by default
+  when available", above.  Please read the comments at the top of
+  <file:drivers/ide/alim15x3.c>.
+
+  If unsure, say N.
+
+CONFIG_WDC_ALI15X3
+  This allows for UltraDMA support for WDC drives that ignore CRC
+  checking. You are a fool for enabling this option, but there have
+  been requests. DO NOT COMPLAIN IF YOUR DRIVE HAS FS CORRUPTION, IF
+  YOU ENABLE THIS! No one will listen, just laugh for ignoring this
+  SERIOUS WARNING.
+
+  Using this option can allow WDC drives to run at ATA-4/5 transfer
+  rates with only an ATA-2 support structure.
+
+  SAY N!
+
+CONFIG_BLK_DEV_AMD74XX
+  This driver ensures (U)DMA support for the AMD756/760 Viper
+  chipsets.
+
+  If you say Y here, you also need to say Y to "Use DMA by default
+  when available", above.
+  Please read the comments at the top of <file:drivers/ide/amd74xx.c>.
+
+  If unsure, say N.
+
+CONFIG_AMD74XX_OVERRIDE
+  This option auto-forces the ata66 flag.
+  This effect can be also invoked by calling "idex=ata66"
+  If unsure, say N.
+
+CONFIG_BLK_DEV_CMD64X
+  Say Y here if you have an IDE controller which uses any of these
+  chipsets: CMD643, CMD646, or CMD648.
+
+CONFIG_BLK_DEV_CY82C693
+  This driver adds detection and support for the CY82C693 chipset
+  used on Digital's PC-Alpha 164SX boards.
+
+  If you say Y here, you need to say Y to "Use DMA by default
+  when available" as well.
+
+CONFIG_BLK_DEV_CS5530
+  Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
+  will automatically be detected and configured if found.
+
+  It is safe to say Y to this question.
+
+  People with SCSI-only systems should say N here. If unsure, say Y.
+
+CONFIG_BLK_DEV_HPT34X
+  This driver adds up to 4 more EIDE devices sharing a single
+  interrupt. The HPT343 chipset in its current form is a non-bootable
+  controller; the HPT345/HPT363 chipset is a bootable (needs BIOS FIX)
+  PCI UDMA controllers. This driver requires dynamic tuning of the
+  chipset during the ide-probe at boot time. It is reported to support
+  DVD II drives, by the manufacturer.
+
+CONFIG_HPT34X_AUTODMA
+  This is a dangerous thing to attempt currently! Please read the
+  comments at the top of <file:drivers/ide/hpt34x.c>.  If you say Y
+  here, then say Y to "Use DMA by default when available" as well.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_HPT366
+  HPT366 is an Ultra DMA chipset for ATA-66.
+  HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
+  HPT370 is an Ultra DMA chipset for ATA-100.
+
+  This driver adds up to 4 more EIDE devices sharing a single
+  interrupt.
+
+  The HPT366 chipset in its current form is bootable. One solution
+  for this problem are special LILO commands for redirecting the
+  reference to device 0x80. The other solution is to say Y to "Boot
+  off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
+  your mother board has the chipset natively mounted. Regardless one
+  should use the fore mentioned option and call at LILO or include
+  "ide=reverse" in LILO's append-line.
+
+  This driver requires dynamic tuning of the chipset during the
+  ide-probe at boot. It is reported to support DVD II drives, by the
+  manufacturer.
+
+CONFIG_BLK_DEV_NS87415
+  This driver adds detection and support for the NS87415 chip
+  (used in SPARC64, among others).
+
+  Please read the comments at the top of <file:drivers/ide/ns87415.c>.
+
+CONFIG_BLK_DEV_OPTI621
+  This is a driver for the OPTi 82C621 EIDE controller.
+  Please read the comments at the top of <file:drivers/ide/opti621.c>.
+
+CONFIG_BLK_DEV_SVWKS
+  This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
+  chipsets.
+
+CONFIG_BLK_DEV_PIIX
+  This driver adds PIO mode setting and tuning for all PIIX IDE
+  controllers by Intel.  Since the BIOS can sometimes improperly tune
+  PIO 0-4 mode settings, this allows dynamic tuning of the chipset
+  via the standard end-user tool 'hdparm'.
+
+  Please read the comments at the top of <file:drivers/ide/piix.c>.
+
+  If you say Y here, you should also say Y to "PIIXn Tuning support",
+  below.
+
+  If unsure, say N.
+
+CONFIG_PIIX_TUNING
+  This driver extension adds DMA mode setting and tuning for all PIIX
+  IDE controllers by Intel. Since the BIOS can sometimes improperly
+  set up the device/adapter combination and speed limits, it has
+  become a necessity to back/forward speed devices as needed.
+
+  Case 430HX/440FX PIIX3 need speed limits to reduce UDMA to DMA mode
+  2 if the BIOS can not perform this task at initialization.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_PDC202XX
+  Promise Ultra33 or PDC20246
+  Promise Ultra66 or PDC20262
+  Promise Ultra100 or PDC20265/PDC20267/PDC20268
+
+  This driver adds up to 4 more EIDE devices sharing a single
+  interrupt. This add-on card is a bootable PCI UDMA controller. Since
+  multiple cards can be installed and there are BIOS ROM problems that
+  happen if the BIOS revisions of all installed cards (three-max) do
+  not match, the driver attempts to do dynamic tuning of the chipset
+  at boot-time for max-speed.  Ultra33 BIOS 1.25 or newer is required
+  for more than one card. This card may require that you say Y to
+  "Special UDMA Feature".
+
+  If you say Y here, you need to say Y to "Use DMA by default when
+  available" as well.
+
+  Please read the comments at the top of
+  <file:drivers/ide/pdc202xx.c>.
+
+  If unsure, say N.
+
+CONFIG_PDC202XX_BURST
+  This option causes the pdc202xx driver to enable UDMA modes on the
+  PDC202xx even when the PDC202xx BIOS has not done so.
+
+  It was originally designed for the PDC20246/Ultra33, whose BIOS will
+  only setup UDMA on the first two PDC20246 cards.  It has also been
+  used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+  when the PDC20265 BIOS has been disabled (for faster boot up).
+
+  Please read the comments at the top of
+  <file:drivers/ide/pdc202xx.c>.
+
+  If unsure, say N.
+
+CONFIG_PDC202XX_FORCE
+  For FastTrak enable overriding BIOS.
+
+CONFIG_BLK_DEV_SIS5513
+  This driver ensures (U)DMA support for SIS5513 chipset based
+  mainboards. SiS620/530 UDMA mode 4, SiS5600/5597 UDMA mode 2, all
+  other DMA mode 2 limited chipsets are unsupported to date.
+
+  If you say Y here, you need to say Y to "Use DMA by default when
+  available" as well.
+
+  Please read the comments at the top of <file:drivers/ide/sis5513.c>.
+
+CONFIG_BLK_DEV_SLC90E66
+  This driver ensures (U)DMA support for Victroy66 SouthBridges for
+  SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
+  The nice thing about it is that you can mix Ultra/DMA/PIO devices
+  and it will handle timing cycles.  Since this is an improved
+  look-a-like to the PIIX4 it should be a nice addition.
+
+  If you say Y here, you need to say Y to "Use DMA by default when
+  available" as well.
+
+  Please read the comments at the top of
+  <file:drivers/ide/slc90e66.c>.
+
+CONFIG_BLK_DEV_SL82C105
+  If you have a Winbond SL82c105 IDE controller, say Y here to enable
+  special configuration for this chip. This is common on various CHRP
+  motherboards, but could be used elsewhere. If in doubt, say Y.
+
+CONFIG_BLK_DEV_TRM290
+  This driver adds support for bus master DMA transfers
+  using the Tekram TRM290 PCI IDE chip. Volunteers are
+  needed for further tweaking and development.
+  Please read the comments at the top of <file:drivers/ide/trm290.c>.
+
+CONFIG_BLK_DEV_VIA82CXXX
+  This allows you to configure your chipset for a better use while
+  running PIO/(U)DMA, it will allow you to enable efficiently the
+  second channel dma usage, as it may not be set by BIOS.  It will try
+  to set fifo configuration at its best.  It will allow you to get
+  information from /proc/ide/via provided you enabled "/proc file
+  system" support.
+
+  Please read the comments at the top of
+  <file:drivers/ide/via82cxxx.c>.
+
+  If you say Y here, then say Y to "Use DMA by default when available"
+  as well.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_IDE_RAPIDE
+  Say Y here if you want to support the Yellowstone RapIDE controller
+  manufactured for use with Acorn computers.
+
+CONFIG_IDE_CHIPSETS
+  Say Y here if you want to include enhanced support for various IDE
+  interface chipsets used on motherboards and add-on cards. You can
+  then pick your particular IDE chip from among the following options.
+  This enhanced support may be necessary for Linux to be able to
+  access the 3rd/4th drives in some systems. It may also enable
+  setting of higher speed I/O rates to improve system performance with
+  these chipsets. Most of these also require special kernel boot
+  parameters to actually turn on the support at runtime; you can find
+  a list of these in the file <file:Documentation/ide.txt>.
+
+  People with SCSI-only systems can say N here.
+
+CONFIG_BLK_DEV_4DRIVES
+  Certain older chipsets, including the Tekram 690CD, use a single set
+  of I/O ports at 0x1f0 to control up to four drives, instead of the
+  customary two drives per port. Support for this can be enabled at
+  runtime using the "ide0=four" kernel boot parameter if you say Y
+  here.
+
+CONFIG_BLK_DEV_ALI14XX
+  This driver is enabled at runtime using the "ide0=ali14xx" kernel
+  boot parameter.  It enables support for the secondary IDE interface
+  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
+  I/O speeds to be set as well.  See the files
+  <file:Documentation/ide.txt> and <file:drivers/ide/ali14xx.c> for
+  more info.
+
+CONFIG_BLK_DEV_DTC2278
+  This driver is enabled at runtime using the "ide0=dtc2278" kernel
+  boot parameter. It enables support for the secondary IDE interface
+  of the DTC-2278 card, and permits faster I/O speeds to be set as
+  well. See the <file:Documentation/ide.txt> and
+  <file:drivers/ide/dtc2278.c> files for more info.
+
+CONFIG_BLK_DEV_HT6560B
+  This driver is enabled at runtime using the "ide0=ht6560b" kernel
+  boot parameter. It enables support for the secondary IDE interface
+  of the Holtek card, and permits faster I/O speeds to be set as well.
+  See the <file:Documentation/ide.txt> and
+  <file:drivers/ide/ht6560b.c> files for more info.
+
+CONFIG_BLK_DEV_PDC4030
+  This driver provides support for the secondary IDE interface and
+  cache of Promise IDE chipsets, e.g. DC4030 and DC5030.  This driver
+  is known to incur timeouts/retries during heavy I/O to drives
+  attached to the secondary interface.  CD-ROM and TAPE devices are
+  not supported yet.  This driver is enabled at runtime using the
+  "ide0=dc4030" kernel boot parameter.  See the
+  <file:Documentation/ide.txt> and <file:drivers/ide/pdc4030.c> files
+  for more info.
+
+CONFIG_BLK_DEV_QD65XX
+  This driver is enabled at runtime using the "ide0=qd65xx" kernel
+  boot parameter.  It permits faster I/O speeds to be set.  See the
+  <file:Documentation/ide.txt> and <file:drivers/ide/qd65xx.c> for
+  more info.
+
+CONFIG_BLK_DEV_UMC8672
+  This driver is enabled at runtime using the "ide0=umc8672" kernel
+  boot parameter. It enables support for the secondary IDE interface
+  of the UMC-8672, and permits faster I/O speeds to be set as well.
+  See the files <file:Documentation/ide.txt> and
+  <file:drivers/ide/umc8672.c> for more info.
+
+CONFIG_BLK_DEV_GAYLE
+  This is the IDE driver for the builtin IDE interface on some Amiga
+  models. It supports both the `A1200 style' (used in A600 and A1200)
+  and `A4000 style' (used in A4000 and A4000T) of the Gayle IDE
+  interface. Say Y if you have such an Amiga model and want to use IDE
+  devices (hard disks, CD-ROM drives, etc.) that are connected to the
+  builtin IDE interface.
+
+CONFIG_BLK_DEV_FALCON_IDE
+  This is the IDE driver for the builtin IDE interface on the Atari
+  Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
+  disks, CD-ROM drives, etc.) that are connected to the builtin IDE
+  interface.
+
+CONFIG_BLK_DEV_BUDDHA
+  This is the IDE driver for the IDE interfaces on the Buddha, 
+  Catweasel and X-Surf expansion boards.  It supports up to two interfaces 
+  on the Buddha, three on the Catweasel and two on the X-Surf.
+
+  Say Y if you have a Buddha or Catweasel expansion board and want to
+  use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
+  to one of its IDE interfaces.
+
+CONFIG_BLK_DEV_IDEDOUBLER
+  This driver provides support for the so-called `IDE doublers' (made
+  by various manufacturers, e.g. Eyetech) that can be connected to the
+  builtin IDE interface of some Amiga models. Using such an IDE
+  doubler, you can connect up to four instead of two IDE devices on
+  the Amiga's builtin IDE interface.
+
+  Note that the normal Amiga Gayle IDE driver may not work correctly
+  if you have an IDE doubler and don't enable this driver!
+
+  Say Y if you have an IDE doubler.  The driver is enabled at kernel
+  runtime using the "ide=doubler" kernel boot parameter.
+
+CONFIG_BLK_DEV_IDE_PMAC
+  This driver provides support for the built-in IDE controller on
+  most of the recent Apple Power Macintoshes and PowerBooks.
+  If unsure, say Y.
+
+CONFIG_BLK_DEV_IDEDMA_PMAC
+  This option allows the driver for the built-in IDE controller on
+  Power Macintoshes and PowerBooks to use DMA (direct memory access)
+  to transfer data to and from memory.  Saying Y is safe and improves
+  performance.
+
+CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
+  This option allows the driver for the built-in IDE controller on
+  Power Macintoshes and PowerBooks to use DMA automatically, without
+  it having to be explicitly enabled.  This option is provided because
+  of concerns about a couple of cases where using DMA on buggy PC
+  hardware may have caused damage.  Saying Y should be safe on all
+  Apple machines.
+
+CONFIG_BLK_DEV_MAC_IDE
+  This is the IDE driver for the builtin IDE interface on some m68k
+  Macintosh models. It supports both the `Quadra style' (used in
+  Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
+  (used in the Powerbook 150 and 190 models) IDE interface.
+
+  Say Y if you have such an Macintosh model and want to use IDE
+  devices (hard disks, CD-ROM drives, etc.) that are connected to the
+  builtin IDE interface.
+
+CONFIG_BLK_DEV_IDE_ICSIDE
+  On Acorn systems, say Y here if you wish to use the ICS IDE
+  interface card.  This is not required for ICS partition support.
+  If you are unsure, say N to this.
+
+CONFIG_BLK_DEV_IDEDMA_ICS
+  Say Y here if you want to add DMA (Direct Memory Access) support to
+  the ICS IDE driver.
+
+CONFIG_IDEDMA_ICS_AUTO
+  Prior to kernel version 2.1.112, Linux used to automatically use
+  DMA for IDE drives and chipsets which support it. Due to concerns
+  about a couple of cases where buggy hardware may have caused damage,
+  the default is now to NOT use DMA automatically. To revert to the
+  previous behaviour, say Y to this question.
+
+  If you suspect your hardware is at all flakey, say N here.
+  Do NOT email the IDE kernel people regarding this issue!
+
+CONFIG_BLK_DEV_ATARAID
+  Say Y or M if you have an IDE Raid controller and want linux
+  to use its softwareraid feature.  You must also select an
+  appropriate for your board low-level driver below.
+
+  Note, that Linux does not use the Raid implemetation in BIOS, and
+  the main purpose for this feature is to retain compatibility and
+  data integrity with other OS-es, using the same disk array. Linux
+  has its own Raid drivers, which you should use if you need better
+  performance.
+
+CONFIG_BLK_DEV_ATARAID_PDC
+  Say Y or M if you have a Promise Fasttrak (tm) Raid controller
+  and want linux to use the softwareraid feature of this card.
+  This driver uses /dev/ataraid/dXpY (X and Y numbers) as device
+  names.
+
+  If you choose to compile this as a module, the module will be called
+  pdcraid.o.
+
+CONFIG_BLK_DEV_ATARAID_HPT
+  Say Y or M if you have a Highpoint HPT 370 Raid controller
+  and want linux to use the softwareraid feature of this card.
+  This driver uses /dev/ataraid/dXpY (X and Y numbers) as device
+  names.
+
+  If you choose to compile this as a module, the module will be called
+  hptraid.o.
+
+CONFIG_BLK_DEV_MPC8xx_IDE
+  This option provides support for IDE on Motorola MPC8xx Systems.
+  Please see 'Type of MPC8xx IDE interface' for details.
+
+  If unsure, say N.
+
+CONFIG_BLK_DEV_IDEDISK_FUJITSU
+  Enable vendor-specific code for Fujitsu IDE disks.  Unless you are
+  the IDE maintainer, you probably do not want to mess with this.
+
+CONFIG_BLK_DEV_IDEDISK_IBM
+  Enable vendor-specific code for IBM IDE disks.  Unless you are the
+  IDE maintainer, you probably do not want to mess with this.
+
+CONFIG_BLK_DEV_IDEDISK_MAXTOR
+  Enable vendor-specific code for Maxtor IDE disks.  Unless you are
+  the IDE maintainer, you probably do not want to mess with this.
+
+CONFIG_BLK_DEV_IDEDISK_QUANTUM
+  Enable vendor-specific code for Quantum IDE disks.  Unless you are
+  the IDE maintainer, you probably do not want to mess with this.
+
+CONFIG_BLK_DEV_IDEDISK_SEAGATE
+  Enable vendor-specific code for Seagate IDE disks.  Unless you are
+  the IDE maintainer, you probably do not want to mess with this.
+
+CONFIG_BLK_DEV_IDEDISK_WD
+  Enable vendor-specific code for Western Digital IDE disks.  Unless
+  you are the IDE maintainer, you probably do not want to mess with
+  this.
+
+CONFIG_BLK_DEV_TIVO
+  Enable vendor-specific code for TiVo IDE disks.  Unless you are the
+  IDE maintainer, you probably do not want to mess with this.
+
diff -urN linux-2.5.3-pre4/drivers/ieee1394/Config.help linux/drivers/ieee1394/Config.help
--- linux-2.5.3-pre4/drivers/ieee1394/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/ieee1394/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,102 @@
+CONFIG_IEEE1394
+  IEEE 1394 describes a high performance serial bus, which is also
+  known as FireWire(tm) or i.Link(tm) and is used for connecting all
+  sorts of devices (most notably digital video cameras) to your
+  computer.
+
+  If you have FireWire hardware and want to use it, say Y here.  This
+  is the core support only, you will also need to select a driver for
+  your IEEE 1394 adapter.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ieee1394.o.
+
+CONFIG_IEEE1394_PCILYNX
+  Say Y here if you have an IEEE-1394 controller with the Texas
+  Instruments PCILynx chip.  Note: this driver is written for revision
+  2 of this chip and may not work with revision 0.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called pcilynx.o.
+
+CONFIG_IEEE1394_PCILYNX_LOCALRAM
+  This option makes the PCILynx driver use local RAM available on some
+  PCILynx setups for Packet Control Lists. Local RAM is random access
+  memory which resides on the PCILynx board as opposed to on your
+  computer's motherboard. Local RAM may speed up command processing
+  because no PCI transfers are necessary during use of the Packet
+  Control Lists.
+
+  Note that there are no known PCILynx systems providing local RAM
+  except for the evaluation boards by Texas Instruments and that the
+  PCILynx does not reliably report missing RAM. This means that it is
+  dangerous to say Y here if you are not absolutely sure that your
+  board provides 64KB of local RAM.
+
+  If unsure, say N.
+
+CONFIG_IEEE1394_PCILYNX_PORTS
+  This option enables driver code to access the RAM, ROM and AUX ports
+  of the PCILynx through character devices in /dev.  If you don't know
+  what this is about then you won't need it.
+
+  If unsure, say N.
+
+CONFIG_IEEE1394_OHCI1394
+  Enable this driver if you have an IEEE 1394 controller based on the
+  OHCI-1394 specification. The current driver is only tested with OHCI
+  chipsets made by Texas Instruments and NEC. Most third-party vendors
+  use one of these chipsets.  It should work with any OHCI-1394
+  compliant card, however.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ohci1394.o.
+
+CONFIG_IEEE1394_VIDEO1394
+  This option enables video device usage for OHCI-1394 cards.  Enable
+  this option only if you have an IEEE 1394 video device connected to
+  an OHCI-1394 card.
+
+CONFIG_IEEE1394_DV1394
+  This driver allows you to transmit and receive DV (digital video)
+  streams on an OHCI-1394 card using a simple frame-oriented
+  interface.
+
+  The user-space API for dv1394 is documented in dv1394.h.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called dv1394.o.
+
+CONFIG_IEEE1394_SBP2
+  This option enables you to use SBP-2 devices connected to your IEEE
+  1394 bus.  SBP-2 devices include harddrives and DVD devices.
+
+CONFIG_IEEE1394_RAWIO
+  Say Y here if you want support for the raw device. This is generally
+  a good idea, so you should say Y here. The raw device enables
+  direct communication of user programs with the IEEE 1394 bus and
+  thus with the attached peripherals.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called raw1394.o.
+
+CONFIG_IEEE1394_VERBOSEDEBUG
+  If you say Y here, you will get very verbose debugging logs from the
+  subsystem which includes a dump of the header of every sent and
+  received packet.  This can amount to a high amount of data collected
+  in a very short time which is usually also saved to disk by the
+  system logging daemons.
+
+  Say Y if you really want or need the debugging output, everyone else
+  says N.
+
diff -urN linux-2.5.3-pre4/drivers/input/Config.help linux/drivers/input/Config.help
--- linux-2.5.3-pre4/drivers/input/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/input/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,59 @@
+CONFIG_INPUT
+  Say Y here if you want to enable any of the following options for
+  USB Human Interface Device (HID) support.
+
+  Say Y here if you want to enable any of the USB HID options in the
+  USB support section which require Input core support.
+
+  Otherwise, say N.
+
+CONFIG_INPUT_KEYBDEV
+  Say Y here if you want your USB HID keyboard (or an ADB keyboard
+  handled by the input layer) to be able to serve as a system
+  keyboard.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called keybdev.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_MOUSEDEV
+  Say Y here if you want your USB HID mouse (or ADB mouse handled by
+  the input layer) to be accessible as char devices 13:32+ -
+  /dev/input/mouseX and 13:63 - /dev/input/mice as an emulated ImPS/2
+  mouse.  That way, all user space programs will be able to use your
+  mouse.
+
+  If unsure, say Y.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mousedev.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_MOUSEDEV_SCREEN_X
+  If you're using a digitizer, or a graphic tablet, and want to use
+  it as a mouse then the mousedev driver needs to know the X window
+  screen resolution you are using to correctly scale the data. If
+  you're not using a digitizer, this value is ignored.
+
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y
+  If you're using a digitizer, or a graphic tablet, and want to use
+  it as a mouse then the mousedev driver needs to know the X window
+  screen resolution you are using to correctly scale the data. If
+  you're not using a digitizer, this value is ignored.
+
+CONFIG_INPUT_JOYDEV
+  Say Y here if you want your USB HID joystick or gamepad to be
+  accessible as char device 13:0+ - /dev/input/jsX device.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called joydev.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_INPUT_EVDEV
+  Say Y here if you want your USB or ADB HID device events be
+  accessible under char device 13:64+ - /dev/input/eventX in a generic
+  way.  This is the future ...
+
diff -urN linux-2.5.3-pre4/drivers/isdn/Config.help linux/drivers/isdn/Config.help
--- linux-2.5.3-pre4/drivers/isdn/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/isdn/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,522 @@
+CONFIG_ISDN
+  ISDN ("Integrated Services Digital Networks", called RNIS in France)
+  is a special type of fully digital telephone service; it's mostly
+  used to connect to your Internet service provider (with SLIP or
+  PPP).  The main advantage is that the speed is higher than ordinary
+  modem/telephone connections, and that you can have voice
+  conversations while downloading stuff.  It only works if your
+  computer is equipped with an ISDN card and both you and your service
+  provider purchased an ISDN line from the phone company.  For
+  details, read <http://alumni.caltech.edu/~dank/isdn/> on the WWW.
+
+  This driver allows you to use an ISDN-card for networking
+  connections and as dialin/out device.  The isdn-tty's have a built
+  in AT-compatible modem emulator.  Network devices support autodial,
+  channel-bundling, callback and caller-authentication without having
+  a daemon running.  A reduced T.70 protocol is supported with tty's
+  suitable for German BTX.  On D-Channel, the protocols EDSS1
+  (Euro-ISDN) and 1TR6 (German style) are supported.  See
+  <file:Documentation/isdn/README> for more information.
+
+  If you want to compile the ISDN code as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called isdn.o. If unsure, say N.
+
+CONFIG_ISDN_PPP
+  Over digital connections such as ISDN, there is no need to
+  synchronize sender and recipient's clocks with start and stop bits
+  as is done over analog telephone lines. Instead, one can use
+  "synchronous PPP". Saying Y here will include this protocol. This
+  protocol is used by Cisco and Sun for example. So you want to say Y
+  here if the other end of your ISDN connection supports it. You will
+  need a special version of pppd (called ipppd) for using this
+  feature. See <file:Documentation/isdn/README.syncppp> and
+  <file:Documentation/isdn/syncPPP.FAQ> for more information.
+
+CONFIG_ISDN_MPP
+  With synchronous PPP enabled, it is possible to increase throughput
+  by bundling several ISDN-connections, using this protocol. See
+  <file:Documentation/isdn/README.syncppp> for more information.
+
+CONFIG_ISDN_PPP_VJ
+  This enables Van Jacobson header compression for synchronous PPP.
+  Say Y if the other end of the connection supports it.
+
+CONFIG_ISDN_PPP_BSDCOMP
+  Support for the BSD-Compress compression method for PPP, which uses
+  the LZW compression method to compress each PPP packet before it is
+  sent over the wire. The machine at the other end of the PPP link
+  (usually your ISP) has to support the BSD-Compress compression
+  method as well for this to be useful. Even if they don't support it,
+  it is safe to say Y here.
+
+CONFIG_ISDN_AUDIO
+  If you say Y here, the modem-emulator will support a subset of the
+  EIA Class 8 Voice commands. Using a getty with voice-support
+  (mgetty+sendfax by gert@greenie.muc.de with an extension, available
+  with the ISDN utility package for example), you will be able to use
+  your Linux box as an ISDN-answering machine. Of course, this must be
+  supported by the lowlevel driver also. Currently, the HiSax driver
+  is the only voice-supporting driver. See
+  <file:Documentation/isdn/README.audio> for more information.
+
+CONFIG_ISDN_X25
+  This feature provides the X.25 protocol over ISDN connections.
+  See <file:Documentation/isdn/README.x25> for more information
+  if you are thinking about using this.
+
+CONFIG_ISDN_DIVERSION
+  This option allows you to use some supplementary diversion
+  services in conjunction with the HiSax driver on an EURO/DSS1
+  line.
+
+  Supported options are CD (call deflection), CFU (Call forward
+  unconditional), CFB (Call forward when busy) and CFNR (call forward
+  not reachable). Additionally the actual CFU, CFB and CFNR state may
+  be interrogated.
+
+  The use of CFU, CFB, CFNR and interrogation may be limited to some
+  countries. The keypad protocol is still not implemented. CD should
+  work in all countries if the service has been subscribed to.
+
+  Please read the file <file:Documentation/isdn/README.diversion>.
+
+CONFIG_ISDN_DRV_ICN
+  This enables support for two kinds of ISDN-cards made by a German
+  company called ICN.  2B is the standard version for a single ISDN
+  line with two B-channels, 4B supports two ISDN lines.  For running
+  this card, additional firmware is necessary, which has to be
+  downloaded into the card using a utility which is distributed
+  separately.  See <file:Documentation/isdn/README> and
+  <file:Documentation/isdn/README.icn> for more
+  information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called icn.o.
+
+CONFIG_ISDN_DRV_LOOP
+  This driver provides a virtual ISDN card. Its primary purpose is
+  testing of linklevel features or configuration without getting
+  charged by your service-provider for lots of phone calls.
+  You need will need the loopctrl utility from the latest isdn4k-utils
+  package to set up this driver.
+
+CONFIG_ISDN_DRV_HISAX
+  This is a driver supporting the Siemens chipset on various
+  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
+  S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
+  compatibles).
+
+  HiSax is just the name of this driver, not the name of any hardware.
+
+  If you have a card with such a chipset, you should say Y here and
+  also to the configuration option of the driver for your particular
+  card, below.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called hisax.o.  See <file:Documentation/isdn/README.HiSax>
+  for more information on using this driver.
+
+CONFIG_HISAX_EURO
+  Say Y or N according to the D-channel protocol which your local
+  telephone service company provides.
+
+  The call control protocol E-DSS1 is used in most European countries.
+  If unsure, say Y.
+
+CONFIG_DE_AOC
+  If you want that the HiSax hardware driver sends messages to the
+  upper level of the isdn code on each AOCD (Advice Of Charge, During
+  the call -- transmission of the fee information during a call) and
+  on each AOCE (Advice Of Charge, at the End of the call --
+  transmission of fee information at the end of the call), say Y here.
+  This works only in Germany.
+
+CONFIG_HISAX_NO_SENDCOMPLETE
+  If you have trouble with some ugly exchanges or you live in
+  Australia select this option.
+
+CONFIG_HISAX_NO_LLC
+  If you have trouble with some ugly exchanges try to select this
+  option.
+
+CONFIG_HISAX_NO_KEYPAD
+  If you like to send special dial strings including * or # without
+  using the keypad protocol, select this option.
+
+CONFIG_HISAX_1TR6
+  Say Y or N according to the D-channel protocol which your local
+  telephone service company provides.
+
+  1TR6 is an old call control protocol which was used in Germany
+  before E-DSS1 was established. Nowadays, all new lines in Germany
+  use E-DSS1.
+
+CONFIG_HISAX_NI1
+  Enable this if you like to use ISDN in US on a NI1 basic rate
+  interface.
+
+CONFIG_HISAX_16_0
+  This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
+  and many compatibles.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port/shmem settings.
+
+CONFIG_HISAX_16_3
+  This enables HiSax support for the Teles ISDN-cards S0-16.3 the
+  Teles/Creatix PnP and the Teles PCMCIA.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_TELESPCI
+  This enables HiSax support for the Teles PCI.
+  See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_S0BOX
+  This enables HiSax support for the Teles/Creatix parallel port
+  S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
+  configure it.
+
+CONFIG_HISAX_AVM_A1
+  This enables HiSax support for the AVM A1 (aka "Fritz").
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_FRITZPCI
+  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
+  See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_AVM_A1_PCMCIA
+  This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
+  See <file:Documentation/isdn/README.HiSax> on how to configure it.
+
+CONFIG_HISAX_ELSA
+  This enables HiSax support for the Elsa Mircolink ISA cards, for the
+  Elsa Quickstep series cards and Elsa PCMCIA.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_IX1MICROR2
+  This enables HiSax support for the ITK ix1-micro Revision 2 card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_DIEHLDIVA
+  This enables HiSax support for the Eicon.Diehl Diva none PRO
+  versions passive ISDN cards.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_ASUSCOM
+  This enables HiSax support for the AsusCom and their OEM versions
+  passive ISDN ISA cards.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_TELEINT
+  This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_HFCS
+  This enables HiSax support for the HFC-S 2BDS0 based cards, like
+  teles 16.3c.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_SEDLBAUER
+  This enables HiSax support for the Sedlbauer passive ISDN cards.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using the different cards, a different D-channel protocol, or
+  non-standard IRQ/port settings.
+
+CONFIG_HISAX_SPORTSTER
+  This enables HiSax support for the USR Sportster internal TA card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_MIC
+  This enables HiSax support for the ITH MIC card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_NETJET
+  This enables HiSax support for the NetJet from Traverse
+  Technologies.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_NETJET_U
+  This enables HiSax support for the Netspider U interface ISDN card
+  from Traverse Technologies.
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_NICCY
+  This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_ISURF
+  This enables HiSax support for the Siemens I-Talk/I-Surf card with
+  ISAR chip.
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_HSTSAPHIR
+  This enables HiSax support for the HST Saphir card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_BKM_A4T
+  This enables HiSax support for the Telekom A4T card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_SCT_QUADRO
+  This enables HiSax support for the Scitel Quadro card.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_GAZEL
+  This enables HiSax support for the Gazel cards.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_HFC_PCI
+  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
+
+  For more informations see under
+  <file:Documentation/isdn/README.hfc-pci>.
+
+CONFIG_HISAX_W6692
+  This enables HiSax support for Winbond W6692 based PCI ISDN cards.
+
+  See <file:Documentation/isdn/README.HiSax> on how to configure it
+  using a different D-channel protocol, or non-standard IRQ/port
+  settings.
+
+CONFIG_HISAX_HFC_SX
+  This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
+  cards. This code is not finished yet.
+
+CONFIG_HISAX_AMD7930
+  This enables HiSax support for the AMD7930 chips on some SPARCs.
+  This code is not finished yet.
+
+CONFIG_HISAX_DEBUG
+  This enables debugging code in the new-style HiSax drivers, i.e.
+  the ST5481 USB driver currently. 
+  If in doubt, say yes.
+
+CONFIG_HISAX_ELSA_CS
+  This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
+  card.
+
+CONFIG_HISAX_SEDLBAUER_CS
+  This enables the PCMCIA client driver for the Sedlbauer Speed Star
+  and Speed Star II cards.
+
+CONFIG_HISAX_ST5481
+  This enables the driver for ST5481 based USB ISDN adapters,
+  e.g. the BeWan Gazel 128 USB
+
+CONFIG_ISDN_DRV_PCBIT
+  This enables support for the PCBIT ISDN-card.  This card is
+  manufactured in Portugal by Octal.  For running this card,
+  additional firmware is necessary, which has to be downloaded into
+  the card using a utility which is distributed separately.  See
+  <file:Documentation/isdn/README> and
+  <file:Documentation/isdn/README.pcbit> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called pcbit.o.
+
+CONFIG_ISDN_DRV_SC
+  This enables support for the Spellcaster BRI ISDN boards.  This
+  driver currently builds only in a modularized version ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want, details in <file:Documentation/modules.txt>); the module will
+  be called sc.o.  See <file:Documentation/isdn/README.sc> and
+  <http://www.spellcast.com/> for more information.
+
+CONFIG_ISDN_DRV_EICON
+  Say Y here if you have an Eicon active ISDN card. In order to use
+  this card, additional firmware is necessary, which has to be loaded
+  into the card using the eiconctrl utility which is part of the
+  latest isdn4k-utils package. Please read the file
+  <file:Documentation/isdn/README.eicon> for more information.
+
+CONFIG_ISDN_DRV_EICON_OLD
+  Say Y here to use your Eicon active ISDN card with ISDN4Linux
+  isdn module.
+
+CONFIG_ISDN_DRV_EICON_PCI
+  Say Y here if you have an Eicon Diva Server (BRI/PRI/4BRI) ISDN
+  card.  Please read <file:Documentation/isdn/README.eicon> for more
+  information.
+
+CONFIG_ISDN_DRV_EICON_ISA
+  Say Y here if you have an old-type Eicon active ISDN card. In order
+  to use this card, additional firmware is necessary, which has to be
+  loaded into the card using the eiconctrl utility which is part of
+  the latest isdn4k-utils package. Please read the file
+  <file:Documentation/isdn/README.eicon> for more information.
+
+CONFIG_ISDN_DRV_EICON_DIVAS
+  Enable this option if you want the eicon driver as standalone
+  version with no interface to the ISDN4Linux isdn module. If you
+  say Y here, the eicon module only supports the Diva Server PCI
+  cards and will provide its own IDI interface. You should say N
+  here.
+
+CONFIG_ISDN_TTY_FAX
+  If you say Y here, the modem-emulator will support a subset of the
+  Fax Class 1 and 2 commands. Using a getty with fax-support
+  (mgetty+sendfax, hylafax), you will be able to use your Linux box as
+  an ISDN-fax-machine. This must be supported by the lowlevel driver
+  also. See <file:Documentation/isdn/README.fax> for more information.
+
+CONFIG_ISDN_CAPI
+  This provides the CAPI (Common ISDN Application Programming
+  Interface, a standard making it easy for programs to access ISDN
+  hardware, see <http://www.capi.org/>.  This is needed for AVM's set
+  of active ISDN controllers like B1, T1, M1.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The modules will be called capi.o and kernelcapi.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ISDN_CAPI_CAPI20
+  This option will provide the CAPI 2.0 interface to userspace
+  applications via /dev/capi20. Applications should use the
+  standardized libcapi20 to access this functionality.  You should say
+  Y/M here.
+
+CONFIG_ISDN_CAPI_MIDDLEWARE
+  This option will enhance the capabilities of the /dev/capi20
+  interface.  It will provide a means of moving a data connection,
+  established via the usual /dev/capi20 interface to a special tty
+  device.  If you want to use pppd with pppdcapiplugin to dial up to
+  your ISP, say Y here.
+
+CONFIG_ISDN_CAPI_CAPIFS
+  This option provides a special file system, similar to /dev/pts with
+  device nodes for the special ttys established by using the
+  middleware extension above. If you want to use pppd with
+  pppdcapiplugin to dial up to your ISP, say Y here.
+
+CONFIG_ISDN_CAPI_CAPIDRV
+  This option provides the glue code to hook up CAPI driven cards to
+  the legacy isdn4linux link layer.  If you have a card which is
+  supported by a CAPI driver, but still want to use old features like
+  ippp interfaces or ttyI emulation, say Y/M here.
+
+CONFIG_ISDN_DRV_AVMB1_B1ISA
+  Enable support for the ISA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCI
+  Enable support for the PCI version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4
+  Enable support for the V4 version of AVM B1 PCI card.
+
+CONFIG_ISDN_DRV_AVMB1_T1ISA
+  Enable support for the AVM T1 T1B card.
+  Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
+  Enable support for the PCMCIA version of the AVM B1 card.
+
+CONFIG_ISDN_DRV_AVMB1_AVM_CS
+  Enable the PCMCIA client driver for the AVM B1/M1/M2
+  PCMCIA cards.
+
+CONFIG_ISDN_DRV_AVMB1_T1PCI
+  Enable support for the AVM T1 T1B card.
+  Note: This is a PRI card and handle 30 B-channels.
+
+CONFIG_ISDN_DRV_AVMB1_C4
+  Enable support for the AVM C4/C2 PCI cards.
+  These cards handle 4/2 BRI ISDN lines (8/4 channels).
+
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+  If you say Y here, the AVM B1 driver will give verbose reasons for
+  disconnecting. This will increase the size of the kernel by 7 KB. If
+  unsure, say Y.
+
+CONFIG_ISDN_DRV_ACT2000
+  Say Y here if you have an IBM Active 2000 ISDN card. In order to use
+  this card, additional firmware is necessary, which has to be loaded
+  into the card using a utility which is part of the latest
+  isdn4k-utils package. Please read the file
+  <file:Documentation/isdn/README.act2000> for more information.
+
+CONFIG_ISDN_DRV_TPAM
+  This enables support for the Auvertech TurboPAM ISDN-card.
+  For running this card, additional firmware is necessary, which has
+  to be downloaded into the card using a utility which is distributed
+  separately from the Auvertech's web site: <http://www.auvertech.fr/>.
+
+  Please redirect all support questions to support@auvertech.fr.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called tpam.o.
+
+CONFIG_HYSDN
+  Say Y here if you have one of Hypercope's active PCI ISDN cards
+  Champ, Ergo and Metro. You will then get a module called hysdn.o.
+  Please read the file <file:Documentation/isdn/README.hysdn> for more
+  information.
+
+CONFIG_HYSDN_CAPI
+  Say Y here if you like to use Hypercope's CAPI 2.0 interface.
+
diff -urN linux-2.5.3-pre4/drivers/md/Config.help linux/drivers/md/Config.help
--- linux-2.5.3-pre4/drivers/md/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/md/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,124 @@
+CONFIG_BLK_DEV_LVM
+  This driver lets you combine several hard disks, hard disk
+  partitions, multiple devices or even loop devices (for evaluation
+  purposes) into a volume group.  Imagine a volume group as a kind of
+  virtual disk. Logical volumes, which can be thought of as virtual
+  partitions, can be created in the volume group.  You can resize
+  volume groups and logical volumes after creation time, corresponding
+  to new capacity needs.  Logical volumes are accessed as block
+  devices named /dev/VolumeGroupName/LogicalVolumeName.
+
+  For details see <file:Documentation/LVM-HOWTO>.  You will need
+  supporting user space software; location is in
+  <file:Documentation/Changes>.
+
+  If you want to compile this support as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called lvm-mod.o.
+
+CONFIG_MD
+  Support multiple physical spindles through a single logical device.
+  Required for RAID and logical volume management (LVM).
+
+CONFIG_BLK_DEV_MD
+  This driver lets you combine several hard disk partitions into one
+  logical block device. This can be used to simply append one
+  partition to another one or to combine several redundant hard disks
+  into a RAID1/4/5 device so as to provide protection against hard
+  disk failures. This is called "Software RAID" since the combining of
+  the partitions is done by the kernel. "Hardware RAID" means that the
+  combining is done by a dedicated controller; if you have such a
+  controller, you do not need to say Y here.
+
+  More information about Software RAID on Linux is contained in the
+  Software RAID mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. There you will also learn
+  where to get the supporting user space utilities raidtools.
+
+  If unsure, say N.
+
+CONFIG_MD_LINEAR
+  If you say Y here, then your multiple devices driver will be able to
+  use the so-called linear mode, i.e. it will combine the hard disk
+  partitions by simply appending one to the other.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called linear.o.
+
+  If unsure, say Y.
+
+CONFIG_MD_RAID0
+  If you say Y here, then your multiple devices driver will be able to
+  use the so-called raid0 mode, i.e. it will combine the hard disk
+  partitions into one logical device in such a fashion as to fill them
+  up evenly, one chunk here and one chunk there. This will increase
+  the throughput rate if the partitions reside on distinct disks.
+
+  Information about Software RAID on Linux is contained in the
+  Software-RAID mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. There you will also
+  learn where to get the supporting user space utilities raidtools.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called raid0.o.
+
+  If unsure, say Y.
+
+CONFIG_MD_RAID1
+  A RAID-1 set consists of several disk drives which are exact copies
+  of each other.  In the event of a mirror failure, the RAID driver
+  will continue to use the operational mirrors in the set, providing
+  an error free MD (multiple device) to the higher levels of the
+  kernel.  In a set with N drives, the available space is the capacity
+  of a single drive, and the set protects against a failure of (N - 1)
+  drives.
+
+  Information about Software RAID on Linux is contained in the
+  Software-RAID mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  There you will also
+  learn where to get the supporting user space utilities raidtools.
+
+  If you want to use such a RAID-1 set, say Y. This code is also
+  available as a module called raid1.o ( = code which can be inserted
+  in and removed from the running kernel whenever you want).  If you
+  want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
+CONFIG_MD_RAID5
+  A RAID-5 set of N drives with a capacity of C MB per drive provides
+  the capacity of C * (N - 1) MB, and protects against a failure
+  of a single drive. For a given sector (row) number, (N - 1) drives
+  contain data sectors, and one drive contains the parity protection.
+  For a RAID-4 set, the parity blocks are present on a single drive,
+  while a RAID-5 set distributes the parity across the drives in one
+  of the available parity distribution methods.
+
+  Information about Software RAID on Linux is contained in the
+  Software-RAID mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. There you will also
+  learn where to get the supporting user space utilities raidtools.
+
+  If you want to use such a RAID-4/RAID-5 set, say Y. This code is
+  also available as a module called raid5.o ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
+CONFIG_MD_MULTIPATH
+  Multipath-IO is the ability of certain devices to address the same
+  physical disk over multiple 'IO paths'. The code ensures that such
+  paths can be defined and handled at runtime, and ensures that a
+  transparent failover to the backup path(s) happens if a IO errors
+  arrives on the primary path.
+
+  If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/media/Config.help linux/drivers/media/Config.help
--- linux-2.5.3-pre4/drivers/media/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/media/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,15 @@
+CONFIG_VIDEO_DEV
+  Support for audio/video capture and overlay devices and FM radio
+  cards. The exact capabilities of each device vary. User tools for
+  this are available from
+  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+  If you are interested in writing a driver for such an audio/video
+  device or user software interacting with such a driver, please read
+  the file <file:Documentation/video4linux/API.html>.
+
+  This driver is also available as a module called videodev.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/media/radio/Config.help linux/drivers/media/radio/Config.help
--- linux-2.5.3-pre4/drivers/media/radio/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/media/radio/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,274 @@
+CONFIG_RADIO_RTRACK
+  Choose Y here if you have one of these FM radio cards, and then fill
+  in the port address below.
+
+  Note that newer AIMSlab RadioTrack cards have a different chipset
+  and are not supported by this driver.  For these cards, use the
+  RadioTrack II driver below.
+
+  If you have a GemTeks combined (PnP) sound- and radio card you must
+  use this driver as a module and setup the card with isapnptools.
+  You must also pass the module a suitable io parameter, 0x248 has
+  been reported to be used by these cards.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.  More
+  information is contained in the file
+  <file:Documentation/video4linux/radiotrack.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-aimslab.o.
+
+CONFIG_RADIO_RTRACK_PORT
+  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
+  haven't changed the jumper setting on the card.
+
+CONFIG_RADIO_RTRACK2
+  Choose Y here if you have this FM radio card, and then fill in the
+  port address below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-rtrack2.o.
+
+CONFIG_RADIO_RTRACK2_PORT
+  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
+  haven't changed the jumper setting on the card.
+
+CONFIG_RADIO_AZTECH
+  Choose Y here if you have one of these FM radio cards, and then fill
+  in the port address below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-aztech.o.
+
+CONFIG_RADIO_AZTECH_PORT
+  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
+  haven't changed the setting of jumper JP3 on the card.  Removing the
+  jumper sets the card to 0x358.
+
+CONFIG_RADIO_CADET
+  Choose Y here if you have one of these AM/FM radio cards, and then
+  fill in the port address below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  Further documentation on this driver can be found on the WWW at
+  <http://linux.blackhawke.net/cadet.html>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-cadet.o.
+
+CONFIG_RADIO_SF16FMI
+  Choose Y here if you have one of these FM radio cards.  If you
+  compile the driver into the kernel and your card is not PnP one, you
+  have to add "sf16fm=<io>" to the kernel command line (I/O address is
+  0x284 or 0x384).
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-sf16fmi.o.
+
+CONFIG_RADIO_TYPHOON
+  Choose Y here if you have one of these FM radio cards, and then fill
+  in the port address and the frequency used for muting below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-typhoon.o.
+
+CONFIG_RADIO_TYPHOON_PROC_FS
+  Say Y here if you want the typhoon radio card driver to write
+  status information (frequency, volume, muted, mute frequency,
+  base address) to /proc/radio-typhoon. The file can be viewed with
+  your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
+  /proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
+
+CONFIG_RADIO_TYPHOON_PORT
+  Enter the I/O port of your Typhoon or EcoRadio radio card.
+
+CONFIG_RADIO_TYPHOON_MUTEFREQ
+  Enter the frequency used for muting the radio. The device is never
+  completely silent. If the volume is just turned down, you can still
+  hear silent voices and music. For that reason, the frequency of the
+  radio device is set to the frequency you can enter here whenever
+  the device is muted. There should be no local radio station at that
+  frequency.
+
+CONFIG_RADIO_ZOLTRIX
+  Choose Y here if you have one of these FM radio cards, and then fill
+  in the port address below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-zoltrix.o.
+
+CONFIG_RADIO_ZOLTRIX_PORT
+  Enter the I/O port of your Zoltrix radio card.
+
+CONFIG_RADIO_MIROPCM20
+  Choose Y here if you have this FM radio card. You also need to say Y
+  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
+  for this to work.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called miropcm20.o.
+
+CONFIG_RADIO_MIROPCM20_RDS
+  Choose Y here if you want to see RDS/RBDS information like
+  RadioText, Programme Service name, Clock Time and date, Programme
+  TYpe and Traffic Announcement/Programme identification.  You also
+  need to say Y to "miroSOUND PCM20 radio" and devfs!
+
+  It's not possible to read the raw RDS packets from the device, so
+  the driver cant provide an V4L interface for this.  But the
+  availability of RDS is reported over V4L by the basic driver
+  already.  Here RDS can be read from files in /dev/v4l/rds.
+
+  As module the driver will be called miropcm20-rds.o.
+
+CONFIG_RADIO_MAESTRO
+  Say Y here to directly support the on-board radio tuner on the
+  Maestro 2 or 2E sound card.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-maestro.o.
+
+CONFIG_RADIO_MAXIRADIO
+  Choose Y here if you have this radio card.  This card may also be
+  found as Gemtek PCI FM.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-maxiradio.o.
+
+CONFIG_RADIO_GEMTEK
+  Choose Y here if you have this FM radio card, and then fill in the
+  port address below.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-gemtek.o.
+
+CONFIG_RADIO_GEMTEK_PORT
+  Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
+  0x34c, if you haven't changed the jumper setting on the card. On
+  Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+  port is 0x28c.
+
+CONFIG_RADIO_GEMTEK_PCI
+  Choose Y here if you have this PCI FM radio card.
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video for Linux API.  Information on 
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-gemtek-pci.o.
+
+CONFIG_RADIO_TERRATEC
+  Choose Y here if you have this FM radio card, and then fill in the
+  port address below. (TODO)
+
+  Note: This driver is in its early stages.  Right now volume and
+  frequency control and muting works at least for me, but
+  unfortunately I have not found anybody who wants to use this card
+  with Linux.  So if it is this what YOU are trying to do right now,
+  PLEASE DROP ME A NOTE!!  Rolf Offermanns (rolf@offermanns.de)
+
+  In order to control your radio card, you will need to use programs
+  that are compatible with the Video For Linux API.  Information on
+  this API and pointers to "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called radio-terratec.o.
+
+CONFIG_RADIO_TERRATEC_PORT
+  Fill in the I/O port of your TerraTec FM radio card. If unsure, go
+  with the default.
+
+CONFIG_RADIO_TRUST
+  This is a driver for the Trust FM radio cards. Say Y if you have
+  such a card and want to use it under Linux.
+
+  This driver is also available as a module called radio-trust.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_RADIO_TRUST_PORT
+  Enter the I/O port of your Trust FM radio card. If unsure, try the
+  values "0x350" or "0x358".
+
diff -urN linux-2.5.3-pre4/drivers/media/video/Config.help linux/drivers/media/video/Config.help
--- linux-2.5.3-pre4/drivers/media/video/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/media/video/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,153 @@
+CONFIG_VIDEO_PROC_FS
+  If you say Y here, you are able to access video device information
+  in /proc/video.
+
+  To use this option, you have to check, that the "/proc file system
+  support" (CONFIG_PROC_FS) is enabled too.
+
+CONFIG_I2C_PARPORT
+  I2C is a simple serial bus system used in many micro controller
+  applications.  Saying Y here will allow you to use your parallel
+  port as an I2C interface.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called i2c-parport.o.
+
+CONFIG_VIDEO_PLANB
+  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
+  input hardware. If you want to experiment with this, say Y.
+  Otherwise, or if you don't understand a word, say N.
+  See <http://www.cpu.lu/~mlan/planb.html> for more info.
+
+  Saying M will compile this driver as a module (planb.o).
+
+CONFIG_VIDEO_BT848
+  Support for BT848 based frame grabber/overlay boards. This includes
+  the Miro, Hauppauge and STB boards. Please read the material in
+  <file:Documentation/video4linux/bttv> for more information.
+
+  If you say Y or M here, you need to say Y or M to "I2C support" and
+  "I2C bit-banging interfaces" in the character device section.
+
+  This driver is available as a module called bttv.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_VINO
+  Say Y here to build in support for the Vino video input system found
+  on SGI Indy machines.
+
+CONFIG_VIDEO_STRADIS
+  Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
+  driver for PCI.  There is a product page at
+  <http://www.stradis.com/decoder.html>.
+
+CONFIG_VIDEO_ZORAN
+  Say Y here to include support for video cards based on the Zoran
+  ZR36057/36060 encoder/decoder chip (including the Iomega Buz and the
+  Miro DC10 and DC30 video capture cards).
+
+CONFIG_VIDEO_ZORAN_BUZ
+  Say Y here to include support for the Iomega Buz video card.  There
+  is a Buz/Linux homepage at <http://www.lysator.liu.se/~gz/buz/>.
+
+CONFIG_VIDEO_ZR36120
+  Support for ZR36120/ZR36125 based frame grabber/overlay boards.
+  This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
+  and Buster boards. Please read the material in
+  <file:Documentation/video4linux/zr36120.txt> for more information.
+
+  This driver is also available as a module called zr36120.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_SAA5249
+  Support for I2C bus based teletext using the SAA5249 chip. At the
+  moment this is only useful on some European WinTV cards.
+
+  This driver is also available as a module called saa5249.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_BWQCAM
+  Say Y have if you the black and white version of the QuickCam
+  camera. See the next option for the color version.
+
+  This driver is also available as a module called bw-qcam.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_CQCAM
+  This is the video4linux driver for the colour version of the
+  Connectix QuickCam.  If you have one of these cameras, say Y here,
+  otherwise say N.  This driver does not work with the original
+  monochrome QuickCam, QuickCam VC or QuickClip.  It is also available
+  as a module (c-qcam.o).
+  Read <file:Documentation/video4linux/CQcam.txt> for more information.
+
+CONFIG_VIDEO_W9966
+  Video4linux driver for Winbond's w9966 based Webcams.
+  Currently tested with the LifeView FlyCam Supra.
+  If you have one of these cameras, say Y here
+  otherwise say N.
+  This driver is also available as a module (w9966.o).
+
+  Check out <file:Documentation/video4linux/w9966.txt> for more
+  information.
+
+CONFIG_VIDEO_CPIA
+  This is the video4linux driver for cameras based on Vision's CPiA
+  (Colour Processor Interface ASIC), such as the Creative Labs Video
+  Blaster Webcam II. If you have one of these cameras, say Y here
+  and select parallel port and/or USB lowlevel support below,
+  otherwise say N. This will not work with the Creative Webcam III.
+
+  Please read <file:Documentation/video4linux/README.cpia> for more
+  information.
+
+  This driver is also available as a module (cpia.o).
+
+CONFIG_VIDEO_CPIA_PP
+  This is the lowlevel parallel port support for cameras based on
+  Vision's CPiA (Colour Processor Interface ASIC), such as the
+  Creative Webcam II. If you have the parallel port version of one
+  of these cameras, say Y here, otherwise say N. It is also available
+  as a module (cpia_pp.o).
+
+CONFIG_VIDEO_CPIA_USB
+  This is the lowlevel USB support for cameras based on Vision's CPiA
+  (Colour Processor Interface ASIC), such as the Creative Webcam II.
+  If you have the USB version of one of these cameras, say Y here,
+  otherwise say N. This will not work with the Creative Webcam III.
+  It is also available as a module (cpia_usb.o).
+
+CONFIG_VIDEO_PMS
+  Say Y if you have such a thing.  This driver is also available as a
+  module called pms.o ( = code which can be inserted in and removed
+  from the running kernel whenever you want).  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_VIDEO_MEYE
+  This is the video4linux driver for the Motion Eye camera found
+  in the Vaio Picturebook laptops. Please read the material in
+  <file:Documentation/video4linux/meye.txt> for more information.
+
+  If you say Y or M here, you need to say Y or M to "Sony Programmable
+  I/O Control Device" in the character device section.
+
+  This driver is available as a module called meye.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_TUNER_3036
+  Say Y here to include support for Philips SAB3036 compatible tuners.
+  If in doubt, say N.
+
diff -urN linux-2.5.3-pre4/drivers/message/fusion/Config.help linux/drivers/message/fusion/Config.help
--- linux-2.5.3-pre4/drivers/message/fusion/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/message/fusion/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,120 @@
+CONFIG_FUSION
+  LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
+  provides high performance SCSI host initiator, and LAN [1] interface
+  services to a host system.  The Fusion architecture is capable of
+  duplexing these protocols on high-speed Fibre Channel
+  (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320)
+  physical medium.
+
+          [1] LAN is not supported on parallel SCSI medium.
+
+  These drivers require a Fusion MPT compatible PCI adapter installed
+  in the host system.  MPT adapters contain specialized I/O processors
+  to handle I/O workload, and more importantly to offload this work
+  from the host CPU(s).
+
+  If you have Fusion MPT hardware and want to use it, you can say
+  Y or M here to add MPT (base + ScsiHost) drivers.
+    <Y> = build lib (fusion.o), and link [static] into the kernel [2]
+          proper
+    <M> = compiled as [dynamic] modules [3] named: (mptbase.o,
+          mptscsih.o)
+
+          [2] In order enable capability to boot the linux kernel
+              natively from a Fusion MPT target device, you MUST
+               answer Y here! (currently requires CONFIG_BLK_DEV_SD)
+          [3] This support is also available as a module ( = code
+              which can be inserted in and removed from the running
+              kernel whenever you want).  If you want to compile as
+              modules, say M here and read
+              <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+  If you say Y or M here you will get a choice of these
+  additional protocol and support module options:         Module Name:
+    <M>   Enhanced SCSI error reporting                     (isense.o)
+    <M>   Fusion MPT misc device (ioctl) driver             (mptctl.o)
+    <M>   Fusion MPT LAN driver                             (mptlan.o)
+
+  ---
+  Fusion MPT is trademark of LSI Logic Corporation, and its
+  architecture is based on LSI Logic's Message Passing Interface (MPI)
+  specification.
+
+CONFIG_FUSION_ISENSE
+  The isense module (roughly stands for Interpret SENSE data) is
+  completely optional.  It simply provides extra English readable
+  strings in SCSI Error Report(s) that might be generated from the
+  Fusion MPT SCSI Host driver, for example when a target device
+  returns a SCSI check condition on a I/O.  Without this module
+  loaded you might see:
+
+    SCSI Error Report =-=-= (ioc0,scsi5:0)
+      SCSI_Status=02h (CHECK_CONDITION)
+      Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00
+      SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
+      SenseKey=2h (NOT READY); FRU=02h
+      ASC/ASCQ=29h/00h
+
+  Where otherwise, if this module had been loaded, you would see:
+
+    SCSI Error Report =-=-= (ioc0,scsi5:0)
+      SCSI_Status=02h (CHECK_CONDITION)
+      Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
+      SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
+      SenseKey=2h (NOT READY); FRU=02h
+      ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
+
+  Say M for "Enhanced SCSI error reporting" to compile this optional module,
+  creating a driver named: isense.o.
+
+  NOTE: Support for building this feature into the kernel is not
+  available, due to kernel size considerations.
+
+CONFIG_FUSION_CTL
+  The Fusion MPT misc device driver provides specialized control
+  of MPT adapters via system ioctl calls.  Use of ioctl calls to
+  the MPT driver requires that you create and use a misc device
+  node ala:
+    mknod /dev/mptctl c 10 240
+
+  One use of this ioctl interface is to perform an upgrade (reflash)
+  of the MPT adapter firmware.  Refer to readme file(s) distributed
+  with the Fusion MPT linux driver for additional details.
+
+  If enabled by saying M to this, a driver named: mptctl.o
+  will be compiled.
+
+  If unsure whether you really want or need this, say N.
+
+CONFIG_FUSION_LAN
+  This module supports LAN IP traffic over Fibre Channel port(s)
+  on Fusion MPT compatible hardware (LSIFC9xx chips).
+  The physical interface used is defined in RFC 2625.
+  Please refer to that document for details.
+
+  Installing this driver requires the knowledge to configure and
+  activate a new network interface, "fc0", using standard Linux tools.
+
+  If enabled by saying M to this, a driver named: mptlan.o
+  will be compiled.
+
+  If unsure whether you really want or need this, say N.
+
+  NOTES: This feature is NOT available nor supported for linux-2.2.x
+  kernels.  You must be building a linux-2.3.x or linux-2.4.x kernel
+  in order to configure this option.
+  Support for building this feature into the linux kernel is not
+  yet available.
+
+CONFIG_NET_FC
+  Fibre Channel is a high speed serial protocol mainly used to connect
+  large storage devices to the computer; it is compatible with and
+  intended to replace SCSI.
+
+  If you intend to use Fibre Channel, you need to have a Fibre channel
+  adaptor card in your computer; say Y here and to the driver for your
+  adaptor below. You also should have said Y to "SCSI support" and
+  "SCSI generic support".
+
diff -urN linux-2.5.3-pre4/drivers/message/i2o/Config.help linux/drivers/message/i2o/Config.help
--- linux-2.5.3-pre4/drivers/message/i2o/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/message/i2o/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,71 @@
+CONFIG_I2O
+  The Intelligent Input/Output (I2O) architecture allows hardware
+  drivers to be split into two parts: an operating system specific
+  module called the OSM and an hardware specific module called the
+  HDM. The OSM can talk to a whole range of HDM's, and ideally the
+  HDM's are not OS dependent. This allows for the same HDM driver to
+  be used under different operating systems if the relevant OSM is in
+  place. In order for this to work, you need to have an I2O interface
+  adapter card in your computer. This card contains a special I/O
+  processor (IOP), thus allowing high speeds since the CPU does not
+  have to deal with I/O.
+
+  If you say Y here, you will get a choice of interface adapter
+  drivers and OSM's with the following questions.
+
+  This support is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  You will get modules called
+  i2o_core.o and i2o_config.o.
+
+  If unsure, say N.
+
+CONFIG_I2O_PCI
+  Say Y for support of PCI bus I2O interface adapters. Currently this
+  is the only variety supported, so you should say Y.
+
+  This support is also available as a module called i2o_pci.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_I2O_BLOCK
+  Include support for the I2O Block OSM. The Block OSM presents disk
+  and other structured block devices to the operating system.
+
+  This support is also available as a module called i2o_block.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_I2O_LAN
+  Include support for the LAN OSM. You will also need to include
+  support for token ring or FDDI if you wish to use token ring or FDDI
+  I2O cards with this driver.
+
+  This support is also available as a module called i2o_lan.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_I2O_SCSI
+  Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel
+  I2O controller. You can use both the SCSI and Block OSM together if
+  you wish.
+
+  This support is also available as a module called i2o_scsi.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_I2O_PROC
+  If you say Y here and to "/proc file system support", you will be
+  able to read I2O related information from the virtual directory
+  /proc/i2o.
+
+  This support is also available as a module called i2o_proc.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/mtd/Config.help linux/drivers/mtd/Config.help
--- linux-2.5.3-pre4/drivers/mtd/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/mtd/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,134 @@
+CONFIG_MTD
+  Memory Technology Devices are flash, RAM and similar chips, often
+  used for solid state file systems on embedded devices. This option
+  will provide the generic support for MTD drivers to register
+  themselves with the kernel and for potential users of MTD devices
+  to enumerate the devices which are present and obtain a handle on
+  them. It will also allow you to select individual drivers for 
+  particular hardware and users of MTD devices. If unsure, say N.
+
+CONFIG_MTD_DEBUG
+  This turns on low-level debugging for the entire MTD sub-system.
+  Normally, you should say 'N'.
+
+CONFIG_MTD_PARTITIONS
+  If you have a device which needs to divide its flash chip(s) up
+  into multiple 'partitions', each of which appears to the user as
+  a separate MTD device, you require this option to be enabled. If
+  unsure, say 'Y'.
+
+  Note, however, that you don't need this option for the DiskOnChip
+  devices. Partitioning on NFTL 'devices' is a different - that's the
+  'normal' form of partitioning used on a block device.
+
+CONFIG_MTD_REDBOOT_PARTS
+  RedBoot is a ROM monitor and bootloader which deals with multiple
+  'images' in flash devices by putting a table in the last erase block
+  of the device, similar to a partition table, which gives the
+  offsets, lengths and names of all the images stored in the flash.
+
+  If you need code which can detect and parse this table, and register
+  MTD 'partitions' corresponding to each image in the table, enable
+  this option.
+
+  You will still need the parsing functions to be called by the driver
+  for your particular device. It won't happen automatically. The
+  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+  example.
+
+CONFIG_MTD_BOOTLDR_PARTS
+  The Compaq bootldr deals with multiple 'images' in flash devices
+  by putting a table in one of the first erase blocks of the device,
+  similar to a partition table, which gives the offsets, lengths and
+  names of all the images stored in the flash.
+
+  If you need code which can detect and parse this table, and register
+  MTD 'partitions' corresponding to each image in the table, enable
+  this option.
+
+  You will still need the parsing functions to be called by the driver
+  for your particular device. It won't happen automatically. The 
+  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 
+  example.
+
+CONFIG_MTD_AFS_PARTS
+  The ARM Firmware Suite allows the user to divide flash devices into
+  multiple 'images'. Each such image has a header containing its name
+  and offset/size etc.
+
+  If you need code which can detect and parse these tables, and
+  register MTD 'partitions' corresponding to each image detected,
+  enable this option.
+
+  You will still need the parsing functions to be called by the driver
+  for your particular device.  It won't happen automatically.  The 
+  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+
+CONFIG_MTD_DEBUG_VERBOSE
+  Determines the verbosity level of the MTD debugging messages.
+
+CONFIG_MTD_CHAR
+  This provides a character device for each MTD device present in
+  the system, allowing the user to read and write directly to the
+  memory chips, and also use ioctl() to obtain information about
+  the device, or to erase parts of it.
+
+CONFIG_MTD_BLOCK
+  Although most flash chips have an erase size too large to be useful
+  as block devices, it is possible to use MTD devices which are based
+  on RAM chips in this manner. This block device is a user of MTD
+  devices performing that function.
+
+  At the moment, it is also required for the Journalling Flash File
+  System(s) to obtain a handle on the MTD device when it's mounted
+  (although JFFS and JFFS2 don't actually use any of the functionality
+  of the mtdblock device).
+
+  Later, it may be extended to perform read/erase/modify/write cycles
+  on flash chips to emulate a smaller block size. Needless to say,
+  this is very unsafe, but could be useful for file systems which are
+  almost never written to.
+
+  You do not need this option for use with the DiskOnChip devices. For
+  those, enable NFTL support (CONFIG_NFTL) instead.
+
+CONFIG_MTD_BLOCK_RO
+  This allows you to mount read-only file systems (such as cramfs)
+  from an MTD device, without the overhead (and danger) of the caching
+  driver.
+
+  You do not need this option for use with the DiskOnChip devices. For
+  those, enable NFTL support (CONFIG_NFTL) instead.
+
+CONFIG_FTL
+  This provides support for the original Flash Translation Layer which
+  is part of the PCMCIA specification. It uses a kind of pseudo-
+  file system on a flash device to emulate a block device with
+  512-byte sectors, on top of which you put a 'normal' file system.
+
+  You may find that the algorithms used in this code are patented
+  unless you live in the Free World where software patents aren't
+  legal - in the USA you are only permitted to use this on PCMCIA
+  hardware, although under the terms of the GPL you're obviously
+  permitted to copy, modify and distribute the code as you wish. Just
+  not use it.
+
+CONFIG_NFTL
+  This provides support for the NAND Flash Translation Layer which is
+  used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
+  file system on a flash device to emulate a block device with
+  512-byte sectors, on top of which you put a 'normal' file system.
+
+  You may find that the algorithms used in this code are patented
+  unless you live in the Free World where software patents aren't
+  legal - in the USA you are only permitted to use this on DiskOnChip
+  hardware, although under the terms of the GPL you're obviously
+  permitted to copy, modify and distribute the code as you wish. Just
+  not use it.
+
+CONFIG_NFTL_RW
+  If you're lucky, this will actually work. Don't whinge if it
+  doesn't.  Send mail to the MTD mailing list
+  <linux-mtd@lists.infradead.org> if you want to help to make it more
+  reliable.
+
diff -urN linux-2.5.3-pre4/drivers/mtd/chips/Config.help linux/drivers/mtd/chips/Config.help
--- linux-2.5.3-pre4/drivers/mtd/chips/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/mtd/chips/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,114 @@
+CONFIG_MTD_CFI
+  The Common Flash Interface specification was developed by Intel,
+  AMD and other flash manufactures that provides a universal method
+  for probing the capabilities of flash devices. If you wish to
+  support any device that is CFI-compliant, you need to enable this
+  option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+  for more information on CFI.
+
+CONFIG_MTD_CFI_ADV_OPTIONS
+  If you need to specify a specific endianness for access to flash
+  chips, or if you wish to reduce the size of the kernel by including
+  support for only specific arrangements of flash chips, say 'Y'. This
+  option does not directly affect the code, but will enable other 
+  configuration options which allow you to do so.
+
+  If unsure, say 'N'.
+
+CONFIG_MTD_CFI_GEOMETRY
+  This option does not affect the code directly, but will enable 
+  some other configuration options which would allow you to reduce
+  the size of the kernel by including support for only certain 
+  arrangements of CFI chips. If unsure, say 'N' and all options 
+  which are supported by the current code will be enabled.
+
+CONFIG_MTD_CFI_B1
+  If you wish to support CFI devices on a physical bus which is
+  8 bits wide, say 'Y'.
+
+CONFIG_MTD_CFI_B2
+  If you wish to support CFI devices on a physical bus which is
+  16 bits wide, say 'Y'.
+
+CONFIG_MTD_CFI_B4
+  If you wish to support CFI devices on a physical bus which is
+  32 bits wide, say 'Y'.
+
+CONFIG_MTD_CFI_I1
+  If your flash chips are not interleaved - i.e. you only have one
+  flash chip addressed by each bus cycle, then say 'Y'.
+
+CONFIG_MTD_CFI_I2
+  If your flash chips are interleaved in pairs - i.e. you have two
+  flash chips addressed by each bus cycle, then say 'Y'.
+
+CONFIG_MTD_CFI_I4
+  If your flash chips are interleaved in fours - i.e. you have four
+  flash chips addressed by each bus cycle, then say 'Y'.
+
+CONFIG_MTD_CFI_INTELEXT
+  The Common Flash Interface defines a number of different command
+  sets which a CFI-compliant chip may claim to implement. This code
+  provides support for one of those command sets, used on Intel
+  StrataFlash and other parts.
+
+CONFIG_MTD_CFI_AMDSTD
+  The Common Flash Interface defines a number of different command
+  sets which a CFI-compliant chip may claim to implement. This code
+  provides support for one of those command sets, used on chips 
+  chips including the AMD Am29LV320.
+
+CONFIG_MTD_SHARP
+  This option enables support for flash chips using Sharp-compatible
+  commands, including some which are not CFI-compatible and hence 
+  cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
+
+CONFIG_MTD_AMDSTD
+  This option enables support for flash chips using AMD-compatible
+  commands, including some which are not CFI-compatible and hence 
+  cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
+
+  It also works on AMD compatible chips that do conform to CFI.
+
+CONFIG_MTD_RAM
+  This option enables basic support for RAM chips accessed through 
+  a bus mapping driver.
+
+CONFIG_MTD_ROM
+  This option enables basic support for ROM chips accessed through 
+  a bus mapping driver.
+
+CONFIG_MTD_JEDEC
+  Enable older older JEDEC flash interface devices for self
+  programming flash.  It is commonly used in older AMD chips.  It is
+  only called JEDEC because the JEDEC association
+  <http://www.jedec.org/> distributes the identification codes for the
+  chips. WARNING!!!! This code does not compile and is incomplete as
+  are the specific JEDEC devices drivers.
+
+CONFIG_MTD_ABSENT
+  This option enables support for a dummy probing driver used to
+  allocated placeholder MTD devices on systems that have socketed
+  or removable media.  Use of this driver as a fallback chip probe
+  preserves the expected registration order of MTD device nodes on
+  the system regardless of media presence.  Device nodes created
+  with this driver will return -ENODEV upon access.
+
+CONFIG_MTD_JEDECPROBE
+  This option enables JEDEC-style probing of flash chips which are not
+  compatible with the Common Flash Interface, but will use the common
+  CFI-targetted flash drivers for any chips which are identified which
+  are in fact compatible in all but the probe method. This actually
+  covers most AMD/Fujitsu-compatible chips, and will shortly cover also
+  non-CFI Intel chips (that code is in MTD CVS and should shortly be sent
+  for inclusion in Linus' tree)
+
+CONFIG_MTD_OBSOLETE_CHIPS
+  This option does not enable any code directly, but will allow you to
+  select some other chip drivers which are now considered obsolete,
+  because the generic CONFIG_JEDEC_PROBE code above should now detect
+  the chips which are supported by these drivers, and allow the generic
+  CFI-compatible drivers to drive the chips. Say 'N' here unless you have
+  already tried the CONFIG_JEDEC_PROBE method and reported its failure
+  to the MTD mailing list at <linux-mtd@lists.infradead.org>
+
diff -urN linux-2.5.3-pre4/drivers/mtd/devices/Config.help linux/drivers/mtd/devices/Config.help
--- linux-2.5.3-pre4/drivers/mtd/devices/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/mtd/devices/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,137 @@
+CONFIG_MTD_DOC1000
+  This provides an MTD device driver for the M-Systems DiskOnChip
+  1000 devices, which are obsolete so you probably want to say 'N'.
+
+CONFIG_MTD_DOC2000
+  This provides an MTD device driver for the M-Systems DiskOnChip
+  2000 and Millennium devices.  Originally designed for the DiskOnChip
+  2000, it also now includes support for the DiskOnChip Millennium.
+  If you have problems with this driver and the DiskOnChip Millennium,
+  you may wish to try the alternative Millennium driver below. To use
+  the alternative driver, you will need to undefine DOC_SINGLE_DRIVER
+  in the <file:drivers/mtd/devices/docprobe.c> source code.
+
+  If you use this device, you probably also want to enable the NFTL
+  'NAND Flash Translation Layer' option below, which is used to
+  emulate a block device by using a kind of file system on the flash
+  chips.
+
+CONFIG_MTD_DOC2001
+  This provides an alternative MTD device driver for the M-Systems 
+  DiskOnChip Millennium devices.  Use this if you have problems with
+  the combined DiskOnChip 2000 and Millennium driver above.  To get
+  the DiskOnChip probe code to load and use this driver instead of
+  the other one, you will need to undefine DOC_SINGLE_DRIVER near
+  the beginning of <file:drivers/mtd/devices/docprobe.c>.
+
+  If you use this device, you probably also want to enable the NFTL
+  'NAND Flash Translation Layer' option below, which is used to
+  emulate a block device by using a kind of file system on the flash
+  chips.
+
+CONFIG_MTD_DOCPROBE
+  This isn't a real config option, it's derived.
+
+CONFIG_MTD_DOCPROBE_ADVANCED
+  This option allows you to specify nonstandard address at which to
+  probe for a DiskOnChip, or to change the detection options.  You
+  are unlikely to need any of this unless you are using LinuxBIOS.
+  Say 'N'.
+
+CONFIG_MTD_DOCPROBE_55AA
+  Check for the 0x55 0xAA signature of a DiskOnChip, and do not
+  continue with probing if it is absent.  The signature will always be
+  present for a DiskOnChip 2000 or a normal DiskOnChip Millennium.
+  Only if you have overwritten the first block of a DiskOnChip
+  Millennium will it be  absent.  Enable this option if you are using
+  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+  you have managed to wipe the first block.
+
+CONFIG_MTD_DOCPROBE_ADDRESS
+  By default, the probe for DiskOnChip devices will look for a
+  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+  This option allows you to specify a single address at which to probe
+  for the device, which is useful if you have other devices in that
+  range which get upset when they are probed.
+
+  (Note that on PowerPC, the normal probe will only check at
+  0xE4000000.)
+
+  Normally, you should leave this set to zero, to allow the probe at
+  the normal addresses.
+
+CONFIG_MTD_DOCPROBE_HIGH
+  By default, the probe for DiskOnChip devices will look for a
+  DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+  This option changes to make it probe between 0xFFFC8000 and
+  0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+  useful to you.  Say 'N'.
+
+CONFIG_MTD_PMC551
+  This provides a MTD device driver for the Ramix PMC551 RAM PCI card
+  from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
+  These devices come in memory configurations from 32M - 1G.  If you
+  have one, you probably want to enable this.
+
+  If this driver is compiled as a module you get the ability to select
+  the size of the aperture window pointing into the devices memory.
+  What this means is that if you have a 1G card, normally the kernel
+  will use a 1G memory map as its view of the device.  As a module,
+  you can select a 1M window into the memory and the driver will
+  "slide" the window around the PMC551's memory.  This was
+  particularly useful on the 2.2 kernels on PPC architectures as there
+  was limited kernel space to deal with.
+
+CONFIG_MTD_PMC551_BUGFIX
+  Some of Ramix's PMC551 boards with 256M configurations have invalid
+  column and row mux values.  This option will fix them, but will
+  break other memory configurations.  If unsure say N.
+
+CONFIG_MTD_PMC551_DEBUG
+  This option makes the PMC551 more verbose during its operation and
+  is only really useful if you are developing on this driver or
+  suspect a possible hardware or driver bug.  If unsure say N.
+
+CONFIG_MTD_SLRAM
+  If your CPU cannot cache all of the physical memory in your machine,
+  you can still use it for storage or swap by using this driver to
+  present it to the system as a Memory Technology Device.
+
+CONFIG_MTD_MTDRAM
+  This enables a test MTD device driver which uses vmalloc() to
+  provide storage.  You probably want to say 'N' unless you're
+  testing stuff.
+
+CONFIG_MTDRAM_ERASE_SIZE
+  This allows you to configure the size of the erase blocks in the
+  device emulated by the MTDRAM driver.  If the MTDRAM driver is built
+  as a module, it is also possible to specify this as a parameter when
+  loading the module.
+
+CONFIG_MTDRAM_TOTAL_SIZE
+  This allows you to configure the total size of the MTD device
+  emulated by the MTDRAM driver.  If the MTDRAM driver is built
+  as a module, it is also possible to specify this as a parameter when
+  loading the module.
+
+CONFIG_MTDRAM_ABS_POS
+  If you have system RAM accessible by the CPU but not used by Linux
+  in normal operation, you can give the physical address at which the
+  available RAM starts, and the MTDRAM driver will use it instead of
+  allocating space from Linux's available memory. Otherwise, leave 
+  this set to zero. Most people will want to leave this as zero.
+
+CONFIG_MTD_BLKMTD
+  This driver allows a block device to appear as an MTD. It would
+  generally be used in the following cases:
+
+    Using Compact Flash as an MTD, these usually present themselves to
+    the system as an ATA drive.
+    Testing MTD users (eg JFFS2) on large media and media that might
+    be removed during a write (using the floppy drive).
+
+CONFIG_MTD_LART
+  This enables the flash driver for LART. Please note that you do
+  not need any mapping/chip driver for LART. This one does it all
+  for you, so go disable all of those if you enabled some of them (:
+
diff -urN linux-2.5.3-pre4/drivers/mtd/maps/Config.help linux/drivers/mtd/maps/Config.help
--- linux-2.5.3-pre4/drivers/mtd/maps/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/mtd/maps/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,171 @@
+CONFIG_MTD_SA1100
+  This enables access to the flash chips on most platforms based on
+  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
+  If you have such a board, say 'Y'.
+
+CONFIG_MTD_PHYSMAP
+  This provides a 'mapping' driver which allows the CFI probe and
+  command set driver code to communicate with flash chips which
+  are mapped physically into the CPU's memory. You will need to
+  configure the physical address and size of the flash chips on
+  your particular board as well as the bus width.
+
+CONFIG_MTD_PHYSMAP_START
+  This is the physical memory location at which the flash chips
+  are mapped on your particular target board. Refer to the
+  memory map which should hopefully be in the documentation for
+  your board.
+
+CONFIG_MTD_PHYSMAP_LEN
+  This is the total length of the mapping of the flash chips on
+  your particular board. If there is space, or aliases, in the
+  physical memory map between the chips, this could be larger
+  than the total amount of flash present. Refer to the memory
+  map which should hopefully be in the documentation for your
+  board.
+
+CONFIG_MTD_PHYSMAP_BUSWIDTH
+  This is the total width of the data bus of the flash devices
+  in octets. For example, if you have a data bus width of 32
+  bits, you would set the bus width octect value to 4. This is
+  used internally by the CFI drivers.
+
+CONFIG_MTD_SUN_UFLASH
+  This provides a 'mapping' driver which supports the way in 
+  which user-programmable flash chips are connected on various 
+  Sun Microsystems boardsets.  This driver will require CFI support 
+  in the kernel, so if you did not enable CFI previously, do that now.
+
+CONFIG_MTD_NORA
+  If you had to ask, you don't have one. Say 'N'.
+
+CONFIG_MTD_PNC2000
+  PNC-2000 is the name of Network Camera product from PHOTRON
+  Ltd. in Japan. It uses CFI-compliant flash.
+
+CONFIG_MTD_RPXLITE
+  The RPXLite PowerPC board has CFI-compliant chips mapped in
+  a strange sparse mapping. This 'mapping' driver supports that
+  arrangement, allowing the CFI probe and command set driver code
+  to communicate with the chips on the RPXLite board. More at
+  <http://www.embeddedplanet.com/rpx_lite_specification_sheet.htm>.
+
+CONFIG_MTD_SC520CDP
+  The SC520 CDP board has two banks of CFI-compliant chips and one
+  Dual-in-line JEDEC chip. This 'mapping' driver supports that
+  arrangement, implementing three MTD devices.
+
+CONFIG_MTD_SBC_GXX
+  This provides a driver for the on-board flash of Arcom Control
+  Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
+  By default the flash is split into 3 partitions which are accessed
+  as separate MTD devices.  This board utilizes Intel StrataFlash.
+  More info at
+  <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
+
+CONFIG_MTD_DBOX2
+  This enables access routines for the flash chips on the Nokia/Sagem
+  D-Box 2 board. If you have one of these boards and would like to use
+  the flash chips on it, say 'Y'.
+
+CONFIG_MTD_IQ80310
+  This enables access routines for the flash chips on the Intel XScale
+  IQ80310 evaluation board. If you have one of these boards and would 
+  like to use the flash chips on it, say 'Y'.
+
+CONFIG_MTD_NETSC520
+  This enables access routines for the flash chips on the AMD NetSc520
+  demonstration board. If you have one of these boards and would like 
+  to use the flash chips on it, say 'Y'.
+
+CONFIG_MTD_ELAN_104NC
+  This provides a driver for the on-board flash of the Arcom Control
+  System's ELAN-104NC development board. By default the flash
+  is split into 3 partitions which are accessed as separate MTD
+  devices. This board utilizes Intel StrataFlash. More info at
+  <http://www.arcomcontrols.com/products/icp/pc104/processors/>.
+
+CONFIG_MTD_DC21285
+  This provides a driver for the flash accessed using Intel's
+  21285 bridge used with Intel's StrongARM processors. More info at
+  <http://developer.intel.com/design/bridge/quicklist/dsc-21285.htm>.
+
+CONFIG_MTD_CSTM_MIPS_IXX
+  This provides a mapping driver for the Integrated Tecnology Express,
+  Inc (ITE) QED-4N-S01B eval board and the Globespan IVR Reference
+  Board.  It provides the necessary addressing, length, buswidth, vpp
+  code and addition setup of the flash device for these boards.  In
+  addition, this mapping driver can be used for other boards via
+  setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/LEN/BUSWIDTH
+  parameters.  This mapping will provide one mtd device using one
+  partition.  The start address can be offset from the beginning of
+  flash and the len can be less than the total flash device size to
+  allow a window into the flash.  Both CFI and JEDEC probes are
+  called.
+
+CONFIG_MTD_CSTM_MIPS_IXX_START
+  This is the physical memory location that the MTD driver will
+  use for the flash chips on your particular target board. 
+  Refer to the memory map which should hopefully be in the 
+  documentation for your board.
+
+CONFIG_MTD_CSTM_MIPS_IXX_LEN
+  This is the total length that the MTD driver will use for the 
+  flash chips on your particular board.  Refer to the memory
+  map which should hopefully be in the documentation for your
+  board.
+
+CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH
+  This is the total bus width of the mapping of the flash chips
+  on your particular board.
+
+CONFIG_MTD_MIXMEM
+  This supports the paging arrangement for access to flash chips
+  on the MixCOM piggyback card, allowing the flash chip drivers
+  to get on with their job of driving the flash chips without
+  having to know about the paging. If you have one of these boards,
+  you probably want to enable this mapping driver. More info is at
+  <http://www.itc.hu/>.
+
+CONFIG_MTD_OCTAGON
+  This provides a 'mapping' driver which supports the way in which
+  the flash chips are connected in the Octagon-5066 Single Board
+  Computer. More information on the board is available at
+  <http://www.octagonsystems.com/Products/5066/5066.html>.
+
+CONFIG_MTD_VMAX
+  This provides a 'mapping' driver which supports the way in which
+  the flash chips are connected in the Tempustech VMAX SBC301 Single
+  Board Computer. More information on the board is available at
+  <http://www.tempustech.com/tt301.htm>.
+
+CONFIG_MTD_CFI_FLAGADM
+  Mapping for the Flaga digital module.  If you don´t have one, ignore
+  this setting.
+
+CONFIG_MTD_OCELOT
+  This enables access routines for the boot flash device and for the
+  NVRAM on the Momenco Ocelot board.  If you have one of these boards
+  and would like access to either of these, say 'Y'.
+
+CONFIG_MTD_CDB89712
+  This enables access to the flash or ROM chips on the CDB89712 board.
+  If you have such a board, say 'Y'.
+
+CONFIG_MTD_L440GX
+  Support for treating the BIOS flash chip on Intel L440GX motherboards
+  as an MTD device - with this you can reprogram your BIOS.
+
+  BE VERY CAREFUL.
+
+CONFIG_MTD_SOLUTIONENGINE
+  This enables access to the flash chips on the Hitachi SolutionEngine and
+  similar boards. Say 'Y' if you are building a kernel for such a board.
+
+CONFIG_MTD_TQM8XXL
+  The TQM8xxL PowerPC board has up to two banks of CFI-compliant
+  chips, currently uses AMD one. This 'mapping' driver supports
+  that arrangement, allowing the CFI probe and command set driver
+  code to communicate with the chips on the TQM8xxL board. More at
+  <http://www.denx.de/embedded-ppc-en.html>.
+
diff -urN linux-2.5.3-pre4/drivers/mtd/nand/Config.help linux/drivers/mtd/nand/Config.help
--- linux-2.5.3-pre4/drivers/mtd/nand/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/mtd/nand/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,21 @@
+CONFIG_MTD_NAND
+  This enables support for accessing all type of NAND flash
+  devices.
+
+CONFIG_MTD_NAND_ECC
+  This enables software-based ECC for use with NAND flash chips. It
+  can detect and correct 1 bit errors per 256 byte blocks. This
+  should be used to increase the reliability of the data stored and
+  read on the device.
+
+CONFIG_MTD_NAND_VERIFY_WRITE
+  This adds an extra check when data is written to the flash. The
+  NAND flash device internally checks only bits transitioning
+  from 1 to 0. There is a rare possibility that even though the
+  device thinks the write was successful, a bit could have been
+  flipped accidentaly due to device wear, gamma rays, whatever.
+  Enable this if you are really paranoid.
+
+CONFIG_MTD_NAND_SPIA
+  If you had to ask, you don't have one. Say 'N'.
+
diff -urN linux-2.5.3-pre4/drivers/net/8139cp.c linux/drivers/net/8139cp.c
--- linux-2.5.3-pre4/drivers/net/8139cp.c	Thu Jan 10 16:23:45 2002
+++ linux/drivers/net/8139cp.c	Thu Jan 24 12:35:35 2002
@@ -77,17 +77,6 @@
 MODULE_PARM (multicast_filter_limit, "i");
 MODULE_PARM_DESC (multicast_filter_limit, "8139cp maximum number of filtered multicast addresses");
 
-/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
-#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-        || defined(__sparc_) || defined(__ia64__) \
-        || defined(__sh__) || defined(__mips__)
-static int rx_copybreak = 1518;
-#else
-static int rx_copybreak = 100;
-#endif
-MODULE_PARM (rx_copybreak, "i");
-MODULE_PARM_DESC (rx_copybreak, "8139cp Breakpoint at which Rx packets are copied");
-
 #define PFX			DRV_NAME ": "
 
 #define CP_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
@@ -334,8 +323,8 @@
 	netif_rx (skb);
 }
 
-static inline void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
-				   u32 status, u32 len)
+static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
+			    u32 status, u32 len)
 {
 	if (netif_msg_rx_err (cp))
 		printk (KERN_DEBUG
@@ -429,8 +418,8 @@
 	while (rx_work--) {
 		u32 status, len;
 		dma_addr_t mapping;
-		struct sk_buff *skb, *copy_skb;
-		unsigned copying_skb, buflen;
+		struct sk_buff *skb, *new_skb;
+		unsigned buflen;
 
 		skb = cp->rx_skb[rx_tail].skb;
 		if (!skb)
@@ -453,43 +442,30 @@
 			goto rx_next;
 		}
 
-		copying_skb = (len <= rx_copybreak);
-
 		if (netif_msg_rx_status(cp))
-			printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d copying? %d\n",
-			       cp->dev->name, rx_tail, status, len,
-			       copying_skb);
-
-		buflen = copying_skb ? len : cp->rx_buf_sz;
-		copy_skb = dev_alloc_skb (buflen + RX_OFFSET);
-		if (!copy_skb) {
+			printk(KERN_DEBUG "%s: rx slot %d status 0x%x len %d\n",
+			       cp->dev->name, rx_tail, status, len);
+
+		buflen = cp->rx_buf_sz + RX_OFFSET;
+		new_skb = dev_alloc_skb (buflen);
+		if (!new_skb) {
 			cp->net_stats.rx_dropped++;
 			goto rx_next;
 		}
 
-		skb_reserve(copy_skb, RX_OFFSET);
-		copy_skb->dev = cp->dev;
-
-		if (!copying_skb) {
-			pci_unmap_single(cp->pdev, mapping,
-					 buflen, PCI_DMA_FROMDEVICE);
-			skb->ip_summed = CHECKSUM_NONE;
-			skb_trim(skb, len);
-
-			mapping =
-			cp->rx_skb[rx_tail].mapping =
-				pci_map_single(cp->pdev, copy_skb->data,
-					       buflen, PCI_DMA_FROMDEVICE);
-			cp->rx_skb[rx_tail].skb = copy_skb;
-			skb_put(copy_skb, buflen);
-		} else {
-			skb_put(copy_skb, len);
-			pci_dma_sync_single(cp->pdev, mapping, len, PCI_DMA_FROMDEVICE);
-			memcpy(copy_skb->data, skb->data, len);
+		skb_reserve(new_skb, RX_OFFSET);
+		new_skb->dev = cp->dev;
 
-			/* We'll reuse the original ring buffer. */
-			skb = copy_skb;
-		}
+		pci_unmap_single(cp->pdev, mapping,
+				 buflen, PCI_DMA_FROMDEVICE);
+		skb->ip_summed = CHECKSUM_NONE;
+		skb_put(skb, len);
+
+		mapping =
+		cp->rx_skb[rx_tail].mapping =
+			pci_map_single(cp->pdev, new_skb->tail,
+				       buflen, PCI_DMA_FROMDEVICE);
+		cp->rx_skb[rx_tail].skb = new_skb;
 
 		cp_rx_skb(cp, skb);
 
@@ -884,10 +860,9 @@
 
 		skb->dev = cp->dev;
 		skb_reserve(skb, RX_OFFSET);
-		skb_put(skb, cp->rx_buf_sz);
 
 		cp->rx_skb[i].mapping = pci_map_single(cp->pdev,
-			skb->data, cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
 		cp->rx_skb[i].skb = skb;
 		cp->rx_skb[i].frag = 0;
 
@@ -1045,6 +1020,9 @@
 {
 	struct cp_private *cp = dev->priv;
 	int rc = 0;
+
+	if (!netif_running(dev))
+		return -EINVAL;
 
 	switch (cmd) {
 	case SIOCETHTOOL:
diff -urN linux-2.5.3-pre4/drivers/net/8139too.c linux/drivers/net/8139too.c
--- linux-2.5.3-pre4/drivers/net/8139too.c	Thu Jan 10 16:23:45 2002
+++ linux/drivers/net/8139too.c	Thu Jan 24 12:35:35 2002
@@ -2301,6 +2301,9 @@
 	int rc = 0;
 	int phy = tp->phys[0] & 0x3f;
 
+	if (!netif_running(dev))
+		return -EINVAL;
+
 	if (cmd != SIOCETHTOOL) {
 		/* With SIOCETHTOOL, this would corrupt the pointer.  */
 		data->phy_id &= 0x1f;
diff -urN linux-2.5.3-pre4/drivers/net/Config.help linux/drivers/net/Config.help
--- linux-2.5.3-pre4/drivers/net/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/Config.help	Thu Jan 24 12:35:35 2002
@@ -0,0 +1,1704 @@
+CONFIG_BAGETLANCE
+  Say Y to enable kernel support for AMD Lance Ethernet cards on the
+  MIPS-32-based Baget embedded system.  This chipset is better known
+  via the NE2100 cards.
+
+CONFIG_MIPS_JAZZ_SONIC
+  This is the driver for the onboard card of MIPS Magnum 4000,
+  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+CONFIG_MIPS_GT96100ETH
+  Say Y here to support the Ethernet subsystem on your GT96100 card.
+
+CONFIG_DUMMY
+  This is essentially a bit-bucket device (i.e. traffic you send to
+  this device is consigned into oblivion) with a configurable IP
+  address. It is most commonly used in order to make your currently
+  inactive SLIP address seem like a real address for local programs.
+  If you use SLIP or PPP, you might want to say Y here. Since this
+  thing often comes in handy, the default is Y. It won't enlarge your
+  kernel either. What a deal. Read about it in the Network
+  Administrator's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called dummy.o.  If you want to use more than one dummy
+  device at a time, you need to compile this driver as a module.
+  Instead of 'dummy', the devices will then be called 'dummy0',
+  'dummy1' etc.
+
+CONFIG_BONDING
+  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+  Channels together. This is called 'Etherchannel' by Cisco,
+  'Trunking' by Sun, and 'Bonding' in Linux.
+
+  If you have two Ethernet connections to some other computer, you can
+  make them behave like one double speed connection using this driver.
+  Naturally, this has to be supported at the other end as well, either
+  with a similar Bonding Linux driver, a Cisco 5500 switch or a
+  SunTrunking SunSoft driver.
+
+  This is similar to the EQL driver, but it merges Ethernet segments
+  instead of serial lines.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called bonding.o.
+
+CONFIG_SLIP
+  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+  connect to your Internet service provider or to connect to some
+  other local Unix box or if you want to configure your Linux box as a
+  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+  Internet Protocol) is a protocol used to send Internet traffic over
+  serial connections such as telephone lines or null modem cables;
+  nowadays, the protocol PPP is more commonly used for this same
+  purpose.
+
+  Normally, your access provider has to support SLIP in order for you
+  to be able to use it, but there is now a SLIP emulator called SLiRP
+  around (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection. If
+  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+  NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to
+  configure SLIP. Note that you don't need this option if you just
+  want to run term (term is a program which gives you almost full
+  Internet connectivity if you have a regular dial up shell account on
+  some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>. The module will be
+  called slip.o.
+
+CONFIG_SLIP_COMPRESSED
+  This protocol is faster than SLIP because it uses compression on the
+  TCP/IP headers (not on the data itself), but it has to be supported
+  on both ends. Ask your access provider if you are not sure and
+  answer Y, just in case. You will still be able to use plain SLIP. If
+  you plan to use SLiRP, the SLIP emulator (available from
+  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+  allows you to use SLIP over a regular dial up shell connection, you
+  definitely want to say Y here. The NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, explains how to configure
+  CSLIP. This won't enlarge your kernel.
+
+CONFIG_SLIP_SMART
+  Adds additional capabilities to the SLIP driver to support the
+  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+  analogue lines.
+
+CONFIG_SLIP_MODE_SLIP6
+  Just occasionally you may need to run IP over hostile serial
+  networks that don't pass all control characters or are only seven
+  bit. Saying Y here adds an extra mode you can use with SLIP:
+  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+  the serial device. Naturally, this has to be supported at the other
+  end of the link as well. It's good enough, for example, to run IP
+  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+CONFIG_PPP
+  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+  the same purpose: sending Internet traffic over telephone (and other
+  serial) lines.  Ask your access provider if they support it, because
+  otherwise you can't use it; most Internet access providers these
+  days support PPP rather than SLIP.
+
+  To use PPP, you need an additional program called pppd as described
+  in the PPP-HOWTO, available at
+  <http://www.linuxdoc.org/docs.html#howto>.  Make sure that you have
+  the version of pppd recommended in <file:Documentation/Changes>.
+  The PPP option enlarges your kernel by about 16 KB.
+
+  There are actually two versions of PPP: the traditional PPP for
+  asynchronous lines, such as regular analog phone lines, and
+  synchronous PPP which can be used over digital ISDN lines for
+  example.  If you want to use PPP over phone lines or other
+  asynchronous serial lines, you need to say Y (or M) here and also to
+  the next option, "PPP support for async serial ports".  For PPP over
+  synchronous lines, you should say Y (or M) here and to "Support
+  synchronous PPP", below.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you said Y to "Version information on all symbols" above, then
+  you cannot compile the PPP driver into the kernel; you can then only
+  compile it as a module.  The module will be called ppp_generic.o.
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_PPP_MULTILINK
+  PPP multilink is a protocol (defined in RFC 1990) which allows you
+  to combine several (logical or physical) lines into one logical PPP
+  connection, so that you can utilize your full bandwidth.
+
+  This has to be supported at the other end as well and you need a
+  version of the pppd daemon which understands the multilink protocol.
+
+  If unsure, say N.
+
+CONFIG_PPP_FILTER
+  Say Y here if you want to be able to filter the packets passing over
+  PPP interfaces.  This allows you to control which packets count as
+  activity (i.e. which packets will reset the idle timer or bring up
+  a demand-dialled link) and which packets are to be dropped entirely.
+  You need to say Y here if you wish to use the pass-filter and
+  active-filter options to pppd.
+
+  If unsure, say N.
+
+CONFIG_PPP_ASYNC
+  Say Y (or M) here if you want to be able to use PPP over standard
+  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+  need this option.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PPP_SYNC_TTY
+  Say Y (or M) here if you want to be able to use PPP over synchronous
+  (HDLC) tty devices, such as the SyncLink adapter. These devices
+  are often used for high-speed leased lines like T1/E1.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_PPP_DEFLATE
+  Support for the Deflate compression method for PPP, which uses the
+  Deflate algorithm (the same algorithm that gzip uses) to compress
+  each PPP packet before it is sent over the wire.  The machine at the
+  other end of the PPP link (usually your ISP) has to support the
+  Deflate compression method as well for this to be useful.  Even if
+  they don't support it, it is safe to say Y here.
+
+  This code is also available as a module (code which can be inserted
+  into and removed from the running kernel).  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_PPP_BSDCOMP
+  Support for the BSD-Compress compression method for PPP, which uses
+  the LZW compression method to compress each PPP packet before it is
+  sent over the wire. The machine at the other end of the PPP link
+  (usually your ISP) has to support the BSD-Compress compression
+  method as well for this to be useful. Even if they don't support it,
+  it is safe to say Y here.
+
+  The PPP Deflate compression method ("PPP Deflate compression",
+  above) is preferable to BSD-Compress, because it compresses better
+  and is patent-free.
+
+  Note that the BSD compression code will always be compiled as a
+  module; it is called bsd_comp.o and will show up in the directory
+  modules once you have said "make modules". If unsure, say N.
+
+CONFIG_PPPOE
+  Support for PPP over Ethernet.
+
+  This driver requires a specially patched pppd daemon.  The patch to
+  pppd, along with binaries of a patched pppd package can be found at:
+  <http://www.shoshin.uwaterloo.ca/~mostrows/>.
+
+CONFIG_NET_RADIO
+  Support for wireless LANs and everything having to do with radio,
+  but not with amateur radio or FM broadcasting.
+
+  Saying Y here also enables the Wireless Extensions (creates
+  /proc/net/wireless and enables ifconfig access). The Wireless
+  Extension is a generic API allowing a driver to expose to the user
+  space configuration and statistics specific to common Wireless LANs.
+  The beauty of it is that a single set of tool can support all the
+  variations of Wireless LANs, regardless of their type (as long as
+  the driver supports Wireless Extension). Another advantage is that
+  these parameters may be changed on the fly without restarting the
+  driver (or Linux). If you wish to use Wireless Extensions with
+  wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
+  the tools from
+  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+  Some user-level drivers for scarab devices which don't require
+  special kernel support are available from
+  <ftp://shadow.cabi.net/pub/Linux/>.
+
+CONFIG_STRIP
+  Say Y if you have a Metricom radio and intend to use Starmode Radio
+  IP. STRIP is a radio protocol developed for the MosquitoNet project
+  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
+  traffic using Metricom radios.  Metricom radios are small, battery
+  powered, 100kbit/sec packet radio transceivers, about the size and
+  weight of a cellular telephone. (You may also have heard them called
+  "Metricom modems" but we avoid the term "modem" because it misleads
+  many people into thinking that you can plug a Metricom modem into a
+  phone line and use it as a modem.)
+
+  You can use STRIP on any Linux machine with a serial port, although
+  it is obviously most useful for people with laptop computers. If you
+  think you might get a Metricom radio in the future, there is no harm
+  in saying Y to STRIP now, except that it makes the kernel a bit
+  bigger.
+
+  You can also compile this as a module ( = code which can be inserted
+  in and removed from the running kernel whenever you want), say M
+  here and read <file:Documentation/modules.txt>.  The module will be
+  called strip.o.
+
+CONFIG_ARLAN
+  Aironet makes Arlan, a class of wireless LAN adapters. These use the
+  www.Telxon.com chip, which is also used on several similar cards.
+  This driver is tested on the 655 and IC2200 series cards. Look at
+  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+  The driver is built as two modules, arlan and arlan-proc. The latter
+  is the /proc interface and is not needed most of time.
+
+  On some computers the card ends up in non-valid state after some
+  time. Use a ping-reset script to clear it.
+
+CONFIG_AIRONET4500
+  www.aironet.com (recently bought by Cisco) makes these 802.11 DS
+  adapters.  Driver by Elmer Joandi (elmer@ylenurme.ee).
+
+  Say Y here if you have such an adapter, and then say Y below to
+  the option that applies to your particular type of card (PCI, ISA,
+  or PCMCIA).
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aironet4500_core.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+  quick config parameters:
+	SSID=tsunami - "The Password"
+	adhoc=1  	there are no Access Points around
+	master=1 	Adhoc master (the one who creates network
+                        sync)
+	slave=1		Adhoc slave (btw, it is still forming own net
+			sometimes, and has problems with firmware...
+			change IbssJoinNetTimeout from /proc...)
+	channel=1..? 	meaningful in adhoc mode
+
+  If you have problems with screwing up card, both_bap_lock=1 is a
+  conservative value (performance hit 15%).
+
+  All other parameters can be set via the proc interface.
+
+CONFIG_AIRONET4500_NONCS
+  If you have an ISA, PCI or PCMCIA Aironet 4500/4800 wireless LAN
+  card, say Y here, and then also to the options below that apply
+  to you.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aironet4500_card.o.  If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_AIRONET4500_PNP
+  If you have an ISA Aironet 4500/4800 card which you want to use in
+  PnP (Plug and Play) mode, say Y here. This is the recommended mode
+  for ISA cards. Remember however to enable the PnP jumper on the
+  board if you say Y here.
+
+CONFIG_AIRONET4500_PCI
+  If you have an PCI Aironet 4500/4800 card, say Y here.
+
+CONFIG_AIRONET4500_ISA
+  If you have an ISA Aironet 4500/4800 card which you want to run in
+  non-PnP mode, say Y here. This is not recommended and does not work
+  correctly at this point. Say N.
+
+CONFIG_AIRONET4500_I365
+  If you have a PCMCIA Aironet 4500/4800 card which you want to use
+  without the standard PCMCIA cardservices provided by the pcmcia-cs
+  package, say Y here. This is not recommended, so say N.
+
+CONFIG_AIRONET4500_PROC
+  If you say Y here (and to the "/proc file system" below), you will
+  be able to configure your Aironet card via the
+  /proc/sys/aironet4500 interface.
+
+  Additional info: look in <file:drivers/net/aironet4500_rid.c>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aironet4500_proc.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  NOTE: the proc interface uses a lot of memory, so it is recommended
+        to compile it as a module and remove the module after
+        configuration.
+
+CONFIG_PLIP
+  PLIP (Parallel Line Internet Protocol) is used to create a
+  reasonably fast mini network consisting of two (or, rarely, more)
+  local machines.  A PLIP link from a Linux box is a popular means to
+  install a Linux distribution on a machine which doesn't have a
+  CD-ROM drive (a minimal system has to be transferred with floppies
+  first). The kernels on both machines need to have this PLIP option
+  enabled for this to work.
+
+  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+  ports (the connectors at the computers with 25 holes) are connected
+  with "null printer" or "Turbo Laplink" cables which can transmit 4
+  bits at a time (mode 0) or with special PLIP cables, to be used on
+  bidirectional parallel ports only, which can transmit 8 bits at a
+  time (mode 1); you can find the wiring of these cables in
+  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+  and winsock or NCSA's telnet.
+
+  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+  as the NET-3-HOWTO, both available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that the PLIP
+  protocol has been changed and this PLIP driver won't work together
+  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+  your kernel by about 8 KB.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called plip.o.  If unsure, say Y or M, in case you buy a laptop
+  later.
+
+CONFIG_EQUALIZER
+  If you have two serial connections to some other computer (this
+  usually requires two modems and two telephone lines) and you use
+  SLIP (the protocol for sending Internet traffic over telephone
+  lines) or PPP (a better SLIP) on them, you can make them behave like
+  one double speed connection using this driver.  Naturally, this has
+  to be supported at the other end as well, either with a similar EQL
+  Linux driver or with a Livingston Portmaster 2e.
+
+  Say Y if you want this and read
+  <file:Documentation/networking/eql.txt>.  You may also want to read
+  section 6.2 of the NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eql.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_TUN
+  TUN/TAP provides packet reception and transmission for user space
+  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+  device, which instead of receiving packets from a physical media,
+  receives them from user space program and instead of sending packets
+  via physical media writes them to the user space program.
+
+  When a program opens /dev/net/tun, driver creates and registers
+  corresponding net device tunX or tapX.  After a program closed above
+  devices, driver will automatically delete tunXX or tapXX device and
+  all routes corresponding to it.
+
+  Please read <file:Documentation/networking/tuntap.txt> for more
+  information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tun.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you don't know what to use this for, you don't need it.
+
+CONFIG_ETHERTAP
+  If you say Y here (and have said Y to "Kernel/User network link
+  driver", above) and create a character special file /dev/tap0 with
+  major number 36 and minor number 16 using mknod ("man mknod"), you
+  will be able to have a user space program read and write raw
+  Ethernet frames from/to that special file.  tap0 can be configured
+  with ifconfig and route like any other Ethernet device but it is not
+  connected to any physical LAN; everything written by the user to
+  /dev/tap0 is treated by the kernel as if it had come in from a LAN
+  to the device tap0; everything the kernel wants to send out over the
+  device tap0 can instead be read by the user from /dev/tap0: the user
+  mode program replaces the LAN that would be attached to an ordinary
+  Ethernet device. Please read the file
+  <file:Documentation/networking/ethertap.txt> for more information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ethertap.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you don't know what to use this for, you don't need it.
+
+CONFIG_NET_FC
+  Fibre Channel is a high speed serial protocol mainly used to connect
+  large storage devices to the computer; it is compatible with and
+  intended to replace SCSI.
+
+  If you intend to use Fibre Channel, you need to have a Fibre channel
+  adaptor card in your computer; say Y here and to the driver for your
+  adaptor below. You also should have said Y to "SCSI support" and
+  "SCSI generic support".
+
+CONFIG_IPHASE5526
+  Say Y here if you have a Fibre Channel adaptor of this kind.
+
+  The driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called iph5526.o. For general information about
+  modules read <file:Documentation/modules.txt>.
+
+CONFIG_RCPCI
+  This is a driver for hardware which provides a Virtual Private
+  Network (VPN). Say Y if you have it.
+
+  This code is also available as a module called rcpci.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_ETHERNET
+  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+  type of Local Area Network (LAN) in universities and companies.
+
+  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+  coaxial cable, linking computers in a chain), 10BASE-T or twisted
+  pair (10 Mbps over twisted pair cable, linking computers to central
+  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+  Ethernet (1 Gbps over optical fiber or short copper links).
+
+  If your Linux machine will be connected to an Ethernet and you have
+  an Ethernet network interface card (NIC) installed in your computer,
+  say Y here and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You will then also have
+  to say Y to the driver for your particular NIC.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about Ethernet network cards. If unsure, say N.
+
+CONFIG_NET_VENDOR_SMC
+  If you have a network (Ethernet) card belonging to this class, say Y
+  and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about Western Digital cards. If you say Y, you will be
+  asked for your specific card in the following questions.
+
+CONFIG_WD80x3
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wd.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ULTRAMCA
+  If you have a network (Ethernet) card of this type and are running
+  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc-mca.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ULTRA
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Important: There have been many reports that, with some motherboards
+  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+  such as some BusLogic models) causes corruption problems with many
+  operating systems. The Linux smc-ultra driver has a work-around for
+  this but keep it in mind if you have such a SCSI card and have
+  problems.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc-ultra.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ULTRA32
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc-ultra32.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_SMC9194
+  This is support for the SMC9xxx based Ethernet cards. Choose this
+  option if you have a DELL laptop with the docking station, or
+  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+  into the kernel, and read the file
+  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc9194.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NE2K_PCI
+  This driver is for NE2000 compatible PCI cards. It will not work
+  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+  support" below). If you have a PCI NE2000 network (Ethernet) card,
+  say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver also works for the following NE2000 clone cards:
+    RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
+    NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
+    Holtek HT80232    Holtek HT80229
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ne2k-pci.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NET_VENDOR_RACAL
+  If you have a network (Ethernet) card belonging to this class, such
+  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about NI cards. If you say Y, you will be asked for
+  your specific card in the following questions.
+
+CONFIG_NI5010
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. Note that this is still
+  experimental code.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ni5010.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NI52
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ni52.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NI65
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ni65.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_8139CP
+  This is a driver for the Fast Ethernet PCI network cards based on
+  the RTL8139C+ chips. If you have one of those, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read Documentation/modules.txt. This is recommended.
+  The module will be called 8139cp.o.
+
+CONFIG_8139TOO
+  This is a driver for the Fast Ethernet PCI network cards based on
+  the RTL8139 chips. If you have one of those, say Y and read
+  <file:Documentation/networking/8139too.txt> as well as the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called 8139too.o.
+
+CONFIG_8139TOO_PIO
+  This instructs the driver to use programmed I/O ports (PIO) instead
+  of PCI shared memory (MMIO).  This can possibly solve some problems
+  in case your mainboard has memory consistency issues.  If unsure,
+  say N.
+
+CONFIG_8139TOO_TUNE_TWISTER
+  This implements a function which might come in handy in case you are
+  using low quality on long cabling. It tries to match the transceiver
+  to the cable characteristics. This is experimental since hardly
+  documented by the manufacturer.  If unsure, say N.
+
+CONFIG_8139TOO_8129
+  This enables support for the older and uncommon RTL-8129 and
+  RTL-8130 chips, which support MII via an external transceiver,
+  instead of an internal one.  Disabling this option will save some
+  memory by making the code size smaller.  If unsure, say Y.
+
+CONFIG_SIS900
+  This is a driver for the Fast Ethernet PCI network cards based on
+  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+  SiS 630 and SiS 540 chipsets.  If you have one of those, say Y and
+  read the Ethernet-HOWTO, available at
+  <http://www.linuxdoc.org/docs.html#howto>.  Please read
+  <file:Documentation/networking/sis900.txt> and comments at the
+  beginning of <file:drivers/net/sis900.c> for more information.
+
+  This driver also supports AMD 79C901 HomePNA so that you can use
+  your phone line as a network cable.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called sis900.o.
+
+CONFIG_YELLOWFIN
+  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+  used by the Beowulf Linux cluster project.  See
+  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+  information about this driver in particular and Beowulf in general.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called yellowfin.o.
+
+CONFIG_NET_SB1000
+  This is a driver for the General Instrument (also known as
+  NextLevel) SURFboard 1000 internal
+  cable modem. This is an ISA card which is used by a number of cable
+  TV companies to provide cable modem access. It's a one-way
+  downstream-only cable modem, meaning that your upstream net link is
+  provided by your regular phone modem.
+
+  At present this driver only compiles as a module, so say M here if
+  you have this card. The module will be called sb1000.o. Then read
+  <file:Documentation/networking/README.sb1000> for information on how
+  to use this module, as it needs special ppp scripts for establishing
+  a connection. Further documentation and the necessary scripts can be
+  found at:
+
+  <http://www.jacksonville.net/~fventuri/>
+  <http://home.adelphia.net/~siglercm/sb1000.html>
+  <http://linuxpower.cx/~cable/>
+
+  If you don't have this card, of course say N.
+
+CONFIG_ADAPTEC_STARFIRE
+  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+  driver.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called starfire.o.
+
+CONFIG_ACENIC
+  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+  adapter. The driver allows for using the Jumbo Frame option (9000
+  bytes/frame) however it requires that your switches can handle this
+  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+  line.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called acenic.o.
+
+CONFIG_ACENIC_OMIT_TIGON_I
+  Say Y here if you only have Tigon II based AceNICs and want to leave
+  out support for the older Tigon I based cards which are no longer
+  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+  version)).  This will reduce the size of the driver object by
+  app. 100KB.  If you are not sure whether your card is a Tigon I or a
+  Tigon II, say N here.
+
+  The safe and default value for this is N.
+
+CONFIG_SK98LIN
+  Say Y here if you have a SysKonnect SK-98xx Gigabit Ethernet Server
+  Adapter. The following adapters are supported by this driver:
+  - SK-9841 (single link 1000Base-LX)
+  - SK-9842 (dual link   1000Base-LX)
+  - SK-9843 (single link 1000Base-SX)
+  - SK-9844 (dual link   1000Base-SX)
+  - SK-9821 (single link 1000Base-T)
+  - SK-9822 (dual link   1000Base-T)
+  - SK-9861 (single link Volition connector)
+  - SK-9862 (dual link   Volition connector)
+  The driver also supports the following adapters from Allied Telesyn:
+  - AT2970...
+
+  The dual link adapters support a link-failover feature.  Read
+  <file:Documentation/networking/sk98lin.txt> for information about
+  optional driver parameters.
+  Questions concerning this driver may be addressed to:
+    linux@syskonnect.de
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called sk98lin.o.
+
+CONFIG_SUNGEM
+  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
+  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+CONFIG_MYRI_SBUS
+  This driver supports MyriCOM Sbus gigabit Ethernet cards.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called myri_sbus.o.
+
+CONFIG_DL2K
+  This driver supports D-Link 2000-based gigabit ethernet cards, which
+  includes
+       D-Link DGE-550T Gigabit Ethernet Adapter.
+       D-Link DL2000-based Gigabit Ethernet Adapter.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called dl2k.o.
+
+CONFIG_LANCE
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. Some LinkSys cards are
+  of this type.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called lance.o.
+
+CONFIG_SGI_IOC3_ETH
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_STNIC
+  Support for cards based on the National Semiconductor DP83902AV
+  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
+  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
+  <http://www.national.com/pf/DP/DP83902A.html>.
+
+  If unsure, say N.
+
+CONFIG_NET_VENDOR_3COM
+  If you have a network (Ethernet) card belonging to this class, say Y
+  and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about 3COM cards. If you say Y, you will be asked for
+  your specific card in the following questions.
+
+CONFIG_EL1
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Also, consider buying a
+  new card, since the 3c501 is slow, broken, and obsolete: you will
+  have problems.  Some people suggest to ping ("man ping") a nearby
+  machine every minute ("man cron") when using this card.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c501.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EL2
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c503.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ELPLUS
+  Information about this network (Ethernet) card can be found in
+  <file:Documentation/networking/3c505.txt>.  If you have a card of
+  this type, say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called 3c505.o.
+
+CONFIG_EL16
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c507.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ELMC
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c523.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ELMC_II
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c527.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EL3
+  If you have a network (Ethernet) card belonging to the 3Com
+  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If your card is not working you may need to use the DOS
+  setup disk to disable Plug & Play mode, and to select the default
+  media type.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called 3c509.o.
+
+CONFIG_3C515
+  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+  network card, say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called 3c515.o.
+
+CONFIG_VORTEX
+  This option enables driver support for a large number of 10mbps and
+  10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+
+  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+  "Tornado"   (3c905)                                  PCI
+  "Hurricane" (3c555/3cSOHO)                           PCI
+
+  If you have such a card, say Y and read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>. More
+  specific information is in
+  <file:Documentation/networking/vortex.txt> and in the comments at
+  the beginning of <file:drivers/net/3c59x.c>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NET_ISA
+  If your network (Ethernet) card hasn't been mentioned yet and its
+  bus system (that's the way the cards talks to the other components
+  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
+  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If unsure, say Y.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the remaining ISA network card questions. If you say Y, you will be
+  asked for your specific card in the following questions.
+
+CONFIG_E2100
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called e2100.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_CS89x0
+  Support for CS89x0 chipset based Ethernet cards. If you have a
+  network (Ethernet) card of this type, say Y and read the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto> as well as
+  <file:Documentation/networking/cs89x0.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called cs89x.o.
+
+CONFIG_DEPCA
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto> as well as
+  <file:drivers/net/depca.c>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called
+  depca.o.
+
+CONFIG_EWRK3
+  This driver supports the DE203, DE204 and DE205 network (Ethernet)
+  cards. If this is for you, say Y and read
+  <file:Documentation/networking/ewrk3.txt> in the kernel source as
+  well as the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called ewrk3.o.
+
+CONFIG_SEEQ8005
+  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
+  is for you, read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called ewrk3.o.
+
+CONFIG_AT1700
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called at1700.o.
+
+CONFIG_FMV18X
+  If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
+  say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you use an FMV-183 or FMV-184 and it is not working, you may need
+  to disable Plug & Play mode of the card.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called fmv18x.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EEXPRESS_PRO
+  If you have a network (Ethernet) card of this type, say Y. This
+  driver supports intel i82595{FX,TX} based boards. Note however
+  that the EtherExpress PRO/100 Ethernet card has its own separate
+  driver.  Please read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eepro.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EEXPRESS
+  If you have an EtherExpress16 network (Ethernet) card, say Y and
+  read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that the Intel
+  EtherExpress16 card used to be regarded as a very poor choice
+  because the driver was very unreliable. We now have a new driver
+  that should do better.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called eexpress.o.
+
+CONFIG_HAMACHI
+  If you have a Gigabit Ethernet card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called hamachi.o.
+
+CONFIG_HPLAN_PLUS
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called hp-plus.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_HPLAN
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called hp.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_HP100
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called hp100.o.
+
+CONFIG_NE2000
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Many Ethernet cards
+  without a specific driver are compatible with NE2000.
+
+  If you have a PCI NE2000 card however, say N here and Y to "PCI
+  NE2000 support", above. If you have a NE2000 card and are running on
+  an MCA system (a bus system used on some IBM PS/2 computers and
+  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+  below.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ne.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NATSEMI
+  This driver is for the National Semiconductor DP83810 series,
+  which is used in cards from PureData, NetGear, Linksys
+  and others, including the 83815 chip.
+  More specific information and updates are available from
+  <http://www.scyld.com/network/natsemi.html>.
+
+CONFIG_SK_G16
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_NE2_MCA
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ne2.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_SKMC
+  These are Micro Channel Ethernet adapters. You need to say Y to "MCA
+  support" in order to use this driver.  Supported cards are the SKnet
+  Junior MC2 and the SKnet MC2(+).  The driver automatically
+  distinguishes between the two cards. Note that using multiple boards
+  of different type hasn't been tested with this driver.  Say Y if you
+  have one of these Ethernet adapters.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called sk_mca.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_IBMLANA
+  This is a Micro Channel Ethernet adapter.  You need to set
+  CONFIG_MCA to use this driver.  It is both available as an in-kernel
+  driver and as a module ( = code which can be inserted in and removed
+  from the running kernel whenever you want).  If you want to compile
+  it as a module, say M here and read <file:Documentation/modules.txt>
+  as well as <file:Documentation/networking/net-modules.txt>. The only
+  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
+  will both support 16K and 32K memory windows, however a 32K window
+  gives a better security against packet losses.  Usage of multiple
+  boards with this driver should be possible, but has not been tested
+  up to now due to lack of hardware.
+
+CONFIG_NET_PCI
+  This is another class of network cards which attach directly to the
+  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about this class of network cards. If you say Y, you
+  will be asked for your specific card in the following questions. If
+  you are unsure, say Y.
+
+CONFIG_PCNET32
+  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+  answer Y here and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pcnet32.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_AC3200
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ac3200.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_LNE390
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called lne390.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_NE3210
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that this driver
+  will NOT WORK for NE3200 cards as they are completely different.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ne3210.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_APRICOT
+  If you have a network (Ethernet) controller of this type, say Y and
+  read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> as well as
+  <file:Documentation/networking/net-modules.txt>.  The module will be
+  called apricot.o.
+
+CONFIG_DE4X5
+  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
+  These include the DE425, DE434, DE435, DE450 and DE500 models.  If
+  you have a network card of this type, say Y and read the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. More specific
+  information is contained in
+  <file:Documentation/networking/de4x5.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called de4x5.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_TULIP
+  This driver is developed for the SMC EtherPower series Ethernet
+  cards and also works with cards based on the DECchip 
+  21040/21041/21140 (Tulip series) chips.  Some LinkSys PCI cards are
+  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
+  (smc9332dst), you can also try the driver for "Generic DECchip"
+  cards, above.  However, most people with a network card of this type
+  will say Y here.) Do read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  More specific
+  information is contained in 
+  <file:Documentation/networking/tulip.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tulip.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_DGRS
+  This is support for the Digi International RightSwitch series of
+  PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
+  models.  If you have a network card of this type, say Y and read the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  More specific
+  information is contained in <file:Documentation/networking/dgrs.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dgrs.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EEPRO100
+  If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
+  card, say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eepro100.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_FEALNX
+  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
+  cards. Specifications and data at
+  <http://www.myson.com.hk/mtd/datasheet/>.
+
+CONFIG_ETH16I
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eth16i.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_TLAN
+  If you have a PCI Ethernet network card based on the ThunderLAN chip
+  which is supported by this driver, say Y and read the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Devices currently supported by this driver are Compaq Netelligent,
+  Compaq NetFlex and Olicom cards.  Please read the file
+  <file:Documentation/networking/tlan.txt> for more details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tlan.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+  Please email feedback to  torben.mathiasen@compaq.com.
+
+CONFIG_VIA_RHINE
+  If you have a VIA "rhine" based network card (Rhine-I (3043) or
+  Rhine-2 (VT86c100A)), say Y here.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called via-rhine.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_DM9102
+  This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
+  Davicom (<http://www.davicom.com.tw/>).  If you have such a network
+  (Ethernet) card, say Y.  Some information is contained in the file
+  <file:Documentation/networking/dmfe.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dmfe.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ES3210
+  If you have a network (Ethernet) card of this type, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called es3210.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_EPIC100
+  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+  which is based on the SMC83c17x (EPIC/100).
+  More specific information and updates are available from
+  <http://www.scyld.com/network/epic100.html>.
+
+CONFIG_DECLANCE
+  This driver is for the series of Ethernet controllers produced by
+  DEC (now Compaq) based on the AMD Lance chipset, including the
+  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+CONFIG_SGISEEQ
+  Say Y here if you have an Seeq based Ethernet network card. This is
+  used in many Silicon Graphics machines.
+
+CONFIG_SUNDANCE
+  This driver is for the Sundance "Alta" chip.
+  More specific information and updates are available from
+  <http://www.scyld.com/network/sundance.html>.
+
+CONFIG_WINBOND_840
+  This driver is for the Winbond W89c840 chip.  It also works with
+  the TX9882 chip on the Compex RL100-ATX board.
+  More specific information and updates are available from
+  <http://www.scyld.com/network/drivers.html>.
+
+CONFIG_ZNET
+  The Zenith Z-Note notebook computer has a built-in network
+  (Ethernet) card, and this is the Linux driver for it. Note that the
+  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+  by this driver. Read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_LAN_SAA9730
+  The SAA9730 is a combined multimedia and peripheral controller used
+  in thin clients, Internet access terminals, and diskless
+  workstations.
+  See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
+
+CONFIG_NET_POCKET
+  Cute little network (Ethernet) devices which attach to the parallel
+  port ("pocket adapters"), commonly used with laptops. If you have
+  one of those, say Y and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to plug a network (or some other) card into the PCMCIA
+  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
+  credit card size extension cards used by all modern laptops), you
+  need the pcmcia-cs package (location contained in the file
+  <file:Documentation/Changes>) and you can say N here.
+
+  Laptop users should read the Linux Laptop home page at
+  <http://www.cs.utexas.edu/users/kharker/linux-laptop/>.
+
+  Note that the answer to this question doesn't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about this class of network devices. If you say Y, you
+  will be asked for your specific device in the following questions.
+
+CONFIG_ATP
+  This is a network (Ethernet) device which attaches to your parallel
+  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>, if you
+  want to use this.  If you intend to use this driver, you should have
+  said N to the "Parallel printer support", because the two drivers
+  don't like each other.
+
+  If you want to compile this driver as a module however ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called atp.o.
+
+CONFIG_DE600
+  This is a network (Ethernet) device which attaches to your parallel
+  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, if you want to use
+  this. It is possible to have several devices share a single parallel
+  port and it is safe to compile the corresponding drivers into the
+  kernel.
+
+  If you want to compile this driver as a module however ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called de600.o.
+
+CONFIG_DE620
+  This is a network (Ethernet) device which attaches to your parallel
+  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+  Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, if you want to use
+  this. It is possible to have several devices share a single parallel
+  port and it is safe to compile the corresponding drivers into the
+  kernel.
+
+  If you want to compile this driver as a module however ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called de620.o.
+
+CONFIG_HAPPYMEAL
+  This driver supports the "hme" interface present on most Ultra
+  systems and as an option on older Sbus systems. This driver supports
+  both PCI and Sbus devices. This driver also supports the "qfe" quad
+  100baseT device available in both PCI and Sbus configurations.
+
+  This support is also available as a module called sunhme.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNLANCE
+  This driver supports the "le" interface present on all 32-bit Sparc
+  systems, on some older Ultra systems and as an Sbus option.  These
+  cards are based on the AMD Lance chipset, which is better known
+  via the NE2100 cards.
+
+  This support is also available as a module called sunlance.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNBMAC
+  This driver supports the "be" interface available as an Sbus option.
+  This is Sun's older 100baseT Ethernet device.
+
+  This support is also available as a module called sunbmac.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUNQE
+  This driver supports the "qe" 10baseT Ethernet device, available as
+  an Sbus option. Note that this is not the same as Quad FastEthernet
+  "qfe" which is supported by the Happy Meal driver instead.
+
+  This support is also available as a module called sunqe.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SHAPER
+  The traffic shaper is a virtual network device that allows you to
+  limit the rate of outgoing data flow over some other network device.
+  The traffic that you want to slow down can then be routed through
+  these virtual devices. See
+  <file:Documentation/networking/shaper.txt> for more information.
+
+  An alternative to this traffic shaper is the experimental
+  Class-Based Queueing (CBQ) scheduling support which you get if you
+  say Y to "QoS and/or fair queueing" above.
+
+  To set up and configure shaper devices, you need the shapecfg
+  program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
+  shaper package.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called shaper.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_FDDI
+  Fiber Distributed Data Interface is a high speed local area network
+  design; essentially a replacement for high speed Ethernet. FDDI can
+  run over copper or fiber. If you are connected to such a network and
+  want a driver for the FDDI card in your computer, say Y here (and
+  then also Y to the driver for your FDDI card, below). Most people
+  will say N.
+
+CONFIG_DEFXX
+  This is support for the DIGITAL series of EISA (DEFEA) and PCI
+  (DEFPA) controllers which can connect you to a local FDDI network.
+
+CONFIG_SKFP
+  Say Y here if you have a SysKonnect FDDI PCI adapter.
+  The following adapters are supported by this driver:
+  - SK-5521 (SK-NET FDDI-UP)
+  - SK-5522 (SK-NET FDDI-UP DAS)
+  - SK-5541 (SK-NET FDDI-FP)
+  - SK-5543 (SK-NET FDDI-LP)
+  - SK-5544 (SK-NET FDDI-LP DAS)
+  - SK-5821 (SK-NET FDDI-UP64)
+  - SK-5822 (SK-NET FDDI-UP64 DAS)
+  - SK-5841 (SK-NET FDDI-FP64)
+  - SK-5843 (SK-NET FDDI-LP64)
+  - SK-5844 (SK-NET FDDI-LP64 DAS)
+  - Netelligent 100 FDDI DAS Fibre SC
+  - Netelligent 100 FDDI SAS Fibre SC
+  - Netelligent 100 FDDI DAS UTP
+  - Netelligent 100 FDDI SAS UTP
+  - Netelligent 100 FDDI SAS Fibre MIC
+
+  Read <file:Documentation/networking/skfp.txt> for information about
+  the driver.
+
+  Questions concerning this driver can be addressed to:
+    linux@syskonnect.de
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called skfp.o.
+
+CONFIG_HIPPI
+  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+  can run over copper (25m) or fiber (300m on multi-mode or 10km on
+  single-mode). HIPPI networks are commonly used for clusters and to
+  connect to super computers. If you are connected to a HIPPI network
+  and have a HIPPI network card in your computer that you want to use
+  under Linux, say Y here (you must also remember to enable the driver
+  for your HIPPI card below). Most people will say N here.
+
+CONFIG_ROADRUNNER
+  Say Y here if this is your PCI HIPPI network card.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rrunner.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_ROADRUNNER_LARGE_RINGS
+  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+  of additional memory to allow for fastest operation, both for
+  transmitting and receiving. This memory cannot be used by any other
+  kernel code or by user space programs. Say Y here only if you have
+  the memory.
+
+CONFIG_ARM_AM79C961A
+  If you wish to compile a kernel for the EBSA-110, then you should
+  always answer Y to this.
+
+CONFIG_ARIADNE
+  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+  Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called ariadne.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_A2065
+  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+  say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called a2065.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_HYDRA
+  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module is called hydra.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MACE
+  Power Macintoshes and clones with Ethernet built-in on the
+  motherboard will usually use a MACE (Medium Access Control for
+  Ethernet) interface. Say Y to include support for the MACE chip.
+
+  This driver is also available as a module called mace.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_MACE_AAUI_PORT
+  Some Apple machines (notably the Apple Network Server) which use the
+  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
+  Y here if you have such a machine.  If unsure, say N.
+  The driver will default to AAUI on ANS anyway, and if you use it as
+  a module, you can provide the port_aaui=0|1 to force the driver.
+
+CONFIG_BMAC
+  Say Y for support of BMAC Ethernet interfaces. These are used on G3
+  computers.
+
+  This driver is also available as a module called bmac.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_GMAC
+  Say Y for support of GMAC Ethernet interfaces. These are used on G4
+  and iBook computers.
+
+  This driver is also available as a module called gmac.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_OAKNET
+  Say Y if your machine has this type of Ethernet network card.
+
+  This driver is also available as a module called oaknet.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NS83820
+  This is a driver for the National Semiconductor DP83820 series
+  of gigabit ethernet MACs.  Cards using this chipset include
+  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+  zero copy.
+
diff -urN linux-2.5.3-pre4/drivers/net/Makefile linux/drivers/net/Makefile
--- linux-2.5.3-pre4/drivers/net/Makefile	Thu Jan 24 12:35:16 2002
+++ linux/drivers/net/Makefile	Thu Jan 24 12:35:35 2002
@@ -17,7 +17,7 @@
 
 export-objs     :=	8390.o arlan.o aironet4500_core.o aironet4500_card.o \
 			ppp_async.o ppp_generic.o slhc.o pppox.o auto_irq.o \
-			net_init.o
+			net_init.o mii.o
 list-multi	:=	rcpci.o
 rcpci-objs	:=	rcpci45.o rclanmtl.o
 
diff -urN linux-2.5.3-pre4/drivers/net/appletalk/Config.help linux/drivers/net/appletalk/Config.help
--- linux-2.5.3-pre4/drivers/net/appletalk/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/appletalk/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,71 @@
+CONFIG_APPLETALK
+  AppleTalk is the way Apple computers speak to each other on a
+  network. If your Linux box is connected to such a network and you
+  want to join the conversation, say Y.
+
+CONFIG_IPDDP
+  This allows IP networking for users who only have AppleTalk
+  networking available. This feature is experimental. With this
+  driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux
+  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
+  you want your Linux box to act as an Internet gateway for a zoo of
+  AppleTalk connected Macs). Please see the file
+  <file:Documentation/networking/ipddp.txt> for more information.
+
+  If you say Y here, the AppleTalk-IP support will be compiled into
+  the kernel. In this case, you can either use encapsulation or
+  decapsulation, but not both. With the following two questions, you
+  decide which one you want.
+
+  If you say M here, the AppleTalk-IP support will be compiled as a
+  module ( = code which can be inserted in and removed from the
+  running kernel whenever you want, read
+  <file:Documentation/modules.txt>).  The module is called ipddp.o.
+  In this case, you will be able to use both encapsulation and
+  decapsulation simultaneously, by loading two copies of the module
+  and specifying different values for the module option ipddp_mode.
+
+CONFIG_IPDDP_ENCAP
+  If you say Y here, the AppleTalk-IP code will be able to encapsulate
+  IP packets inside AppleTalk frames; this is useful if your Linux box
+  is stuck on an AppleTalk network (which hopefully contains a
+  decapsulator somewhere). Please see
+  <file:Documentation/networking/ipddp.txt> for more information. If
+  you said Y to "AppleTalk-IP driver support" above and you say Y
+  here, then you cannot say Y to "AppleTalk-IP to IP Decapsulation
+  support", below.
+
+CONFIG_IPDDP_DECAP
+  If you say Y here, the AppleTalk-IP code will be able to decapsulate
+  AppleTalk-IP frames to IP packets; this is useful if you want your
+  Linux box to act as an Internet gateway for an AppleTalk network.
+  Please see <file:Documentation/networking/ipddp.txt> for more
+  information.  If you said Y to "AppleTalk-IP driver support" above
+  and you say Y here, then you cannot say Y to "IP to AppleTalk-IP
+  Encapsulation support", above.
+
+CONFIG_LTPC
+  This allows you to use the AppleTalk PC card to connect to LocalTalk
+  networks. The card is also known as the Farallon PhoneNet PC card.
+  If you are in doubt, this card is the one with the 65C02 chip on it.
+  You also need version 1.3.3 or later of the netatalk package.
+  This driver is experimental, which means that it may not work.
+  See the file <file:Documentation/networking/ltpc.txt>.
+
+CONFIG_COPS
+  This allows you to use COPS AppleTalk cards to connect to LocalTalk
+  networks. You also need version 1.3.3 or later of the netatalk
+  package. This driver is experimental, which means that it may not
+  work. This driver will only work if you choose "AppleTalk DDP"
+  networking support, above.
+  Please read the file <file:Documentation/networking/cops.txt>.
+
+CONFIG_COPS_DAYNA
+  Support COPS compatible cards with Dayna style firmware (Dayna
+  DL2000/ Daynatalk/PC (half length), COPS LT-95, Farallon PhoneNET PC
+  III, Farallon PhoneNET PC II).
+
+CONFIG_COPS_TANGENT
+  Support COPS compatible cards with Tangent style firmware (Tangent
+  ATB_II, Novell NL-1000, Daystar Digital LT-200.
+
diff -urN linux-2.5.3-pre4/drivers/net/arcnet/Config.help linux/drivers/net/arcnet/Config.help
--- linux-2.5.3-pre4/drivers/net/arcnet/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/arcnet/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,91 @@
+CONFIG_ARCNET
+  If you have a network card of this type, say Y and check out the
+  (arguably) beautiful poetry in
+  <file:Documentation/networking/arcnet.txt>.
+
+  You need both this driver, and the driver for the particular ARCnet
+  chipset of your card. If you don't know, then it's probably a
+  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
+  support" below.
+
+  You might also want to have a look at the Ethernet-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>(even though ARCnet
+  is not really Ethernet).
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called arcnet.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ARCNET_1051
+  This allows you to use RFC1051 with your ARCnet card via the virtual
+  arc0s device. You only need arc0s if you want to talk to ARCnet
+  software complying with the "old" standard, specifically, the DOS
+  arcnet.com packet driver, Amigas running AmiTCP, and some variants
+  of NetBSD. You do not need to say Y here to communicate with
+  industry-standard RFC1201 implementations, like the arcether.com
+  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
+  automatically as the arc0 device. Please read the ARCnet
+  documentation in <file:Documentation/networking/arcnet.txt> for more
+  information about using arc0e and arc0s.
+
+CONFIG_ARCNET_1201
+  This allows you to use RFC1201 with your ARCnet card via the virtual
+  arc0 device.  You need to say Y here to communicate with
+  industry-standard RFC1201 implementations, like the arcether.com
+  packet driver or most DOS/Windows ODI drivers.  Please read the
+  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
+  for more information about using arc0.
+
+CONFIG_ARCNET_RAW
+  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
+  to work unless talking to a copy of the same Linux arcnet driver,
+  but perhaps marginally faster in that case.
+
+CONFIG_ARCNET_COM90xx
+  This is the chipset driver for the standard COM90xx cards. If you
+  have always used the old ARCnet driver without knowing what type of
+  card you had, this is probably the one for you.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called com90xx.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ARCNET_COM90xxIO
+  This is the chipset driver for the COM90xx cards, using them in
+  IO-mapped mode instead of memory-mapped mode. This is slower than
+  the normal driver. Only use it if your card doesn't support shared
+  memory.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called com90io.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ARCNET_RIM_I
+  This is yet another chipset driver for the COM90xx cards, but this
+  time only using memory-mapped mode, and no IO ports at all. This
+  driver is completely untested, so if you have one of these cards,
+  please mail dwmw2@infradead.org, especially if it works!
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module will be called arc-rimi.o.  If you want to compile
+  it as a module, say M here and read <file:Documentation/modules.txt>
+  as  well as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_ARCNET_COM20020
+  This is the driver for the new COM20020 chipset. It supports such
+  things as promiscuous mode, so packet sniffing is possible, and
+  extra diagnostic information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called com20020.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt> as
+  well as <file:Documentation/networking/net-modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/net/cs89x0.c linux/drivers/net/cs89x0.c
--- linux-2.5.3-pre4/drivers/net/cs89x0.c	Sun Sep 30 12:26:06 2001
+++ linux/drivers/net/cs89x0.c	Thu Jan 24 12:35:36 2002
@@ -537,7 +537,7 @@
                         dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
                 }
 		if (net_debug > 1)
-			printk(KERN_DEBUG "%s: new adapter_cnf: 0%x\n",
+			printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
 				dev->name, lp->adapter_cnf);
         }
 
@@ -582,8 +582,8 @@
 		i = lp->isa_config & INT_NO_MASK;
 		if (lp->chip_type == CS8900) {
 			/* Translate the IRQ using the IRQ mapping table. */
-			if (i > sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]))
-				printk("\ncs89x0: bug: isa_config is %d\n", i);
+			if (i >= sizeof(cs8900_irq_map)/sizeof(cs8900_irq_map[0]))
+				printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
 			else
 				i = cs8900_irq_map[i];
 			
diff -urN linux-2.5.3-pre4/drivers/net/fealnx.c linux/drivers/net/fealnx.c
--- linux-2.5.3-pre4/drivers/net/fealnx.c	Thu Jan 10 16:23:45 2002
+++ linux/drivers/net/fealnx.c	Thu Jan 24 12:35:36 2002
@@ -1769,7 +1769,7 @@
 
 	case SIOCSMIIREG:		/* Write MII PHY register. */
 	case SIOCDEVPRIVATE+2:		/* for binary compat, remove in 2.5 */
-		if (!suser())
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
 		return 0;
diff -urN linux-2.5.3-pre4/drivers/net/hamradio/Config.help linux/drivers/net/hamradio/Config.help
--- linux-2.5.3-pre4/drivers/net/hamradio/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/hamradio/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,247 @@
+CONFIG_MKISS
+  KISS is a protocol used for the exchange of data between a computer
+  and a Terminal Node Controller (a small embedded system commonly
+  used for networking over AX.25 amateur radio connections; it
+  connects the computer's serial port with the radio's microphone
+  input and speaker output).
+
+  Although KISS is less advanced than the 6pack protocol, it has
+  the advantage that it is already supported by most modern TNCs
+  without the need for a firmware upgrade.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called mkiss.o.
+
+CONFIG_6PACK
+  6pack is a transmission protocol for the data exchange between your
+  PC and your TNC (the Terminal Node Controller acts as a kind of
+  modem connecting your computer's serial port to your radio's
+  microphone input and speaker output). This protocol can be used as
+  an alternative to KISS for networking over AX.25 amateur radio
+  connections, but it has some extended functionality.
+
+  Note that this driver is still experimental and might cause
+  problems. For details about the features and the usage of the
+  driver, read <file:Documentation/networking/6pack.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called 6pack.o.
+
+CONFIG_BPQETHER
+  AX.25 is the protocol used for computer communication over amateur
+  radio. If you say Y here, you will be able to send and receive AX.25
+  traffic over Ethernet (also called "BPQ AX.25"), which could be
+  useful if some other computer on your local network has a direct
+  amateur radio connection.
+
+CONFIG_DMASCC
+  This is a driver for high-speed SCC boards, i.e. those supporting
+  DMA on one port. You usually use those boards to connect your
+  computer to an amateur radio modem (such as the WA4DSY 56kbps
+  modem), in order to send and receive AX.25 packet radio network
+  traffic.
+
+  Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis
+  PackeTwin, and S5SCC/DMA boards. They are detected automatically.
+  If you have one of these cards, say Y here and read the AX25-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver can operate multiple boards simultaneously. If you
+  compile it as a module (by saying M instead of Y), it will be called
+  dmascc.o. If you don't pass any parameter to the driver, all
+  possible I/O addresses are probed. This could irritate other devices
+  that are currently not in use. You may specify the list of addresses
+  to be probed by "dmascc=addr1,addr2,..." (when compiled into the
+  kernel image) or "io=addr1,addr2,..." (when loaded as a module). The
+  network interfaces will be called dmascc0 and dmascc1 for the board
+  detected first, dmascc2 and dmascc3 for the second one, and so on.
+
+  Before you configure each interface with ifconfig, you MUST set
+  certain parameters, such as channel access timing, clock mode, and
+  DMA channel. This is accomplished with a small utility program,
+  dmascc_cfg, available at
+  <http://www.nt.tuwien.ac.at/~kkudielk/Linux/>. Please be sure to get
+  at least version 1.27 of dmascc_cfg, as older versions will not
+  work with the current driver.
+
+CONFIG_SCC
+  These cards are used to connect your Linux box to an amateur radio
+  in order to communicate with other computers. If you want to use
+  this, read <file:Documentation/networking/z8530drv.txt> and the
+  AX25-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  to "Amateur Radio AX.25 Level 2" support.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called scc.o.
+
+CONFIG_SCC_TRXECHO
+  Some transmitters feed the transmitted signal back to the receive
+  line.  Say Y here to foil this by explicitly disabling the receiver
+  during data transmission.  If in doubt, say Y.
+
+CONFIG_SCC_DELAY
+  Say Y here if you experience problems with the SCC driver not
+  working properly; please read
+  <file:Documentation/networking/z8530drv.txt> for details. If unsure,
+  say N.
+
+CONFIG_YAM
+  The YAM is a modem for packet radio which connects to the serial
+  port and includes some of the functions of a Terminal Node
+  Controller. If you have one of those, say Y here.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_BAYCOM_PAR
+  This is a driver for Baycom style simple amateur radio modems that
+  connect to a parallel interface. The driver supports the picpar and
+  par96 designs. To configure the driver, use the sethdlc utility
+  available in the standard ax25 utilities package. For information on
+  the modems, see <http://www.baycom.de/> and the file
+  <file:Documentation/networking/baycom.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called baycom_par.o.
+
+CONFIG_BAYCOM_EPP
+  This is a driver for Baycom style simple amateur radio modems that
+  connect to a parallel interface. The driver supports the EPP
+  designs. To configure the driver, use the sethdlc utility available
+  in the standard ax25 utilities package. For information on the
+  modems, see <http://www.baycom.de/> and the file
+  <file:Documentation/networking/baycom.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called baycom_par.o.
+
+CONFIG_BAYCOM_SER_FDX
+  This is one of two drivers for Baycom style simple amateur radio
+  modems that connect to a serial interface. The driver supports the
+  ser12 design in full-duplex mode. In addition, it allows the
+  baudrate to be set between 300 and 4800 baud (however not all modems
+  support all baudrates). This is the preferred driver. The next
+  driver, "BAYCOM ser12 half-duplex driver for AX.25" is the old
+  driver and still provided in case this driver does not work with
+  your serial interface chip. To configure the driver, use the sethdlc
+  utility available in the standard ax25 utilities package. For
+  information on the modems, see <http://www.baycom.de/> and
+  <file:Documentation/networking/baycom.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called baycom_ser_fdx.o.
+
+CONFIG_BAYCOM_SER_HDX
+  This is one of two drivers for Baycom style simple amateur radio
+  modems that connect to a serial interface. The driver supports the
+  ser12 design in full-duplex mode. This is the old driver.  It is
+  still provided in case your serial interface chip does not work with
+  the full-duplex driver. This driver is depreciated.  To configure
+  the driver, use the sethdlc utility available in the standard ax25
+  utilities package. For information on the modems, see
+  <http://www.baycom.de/> and
+  <file:Documentation/networking/baycom.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called baycom_ser_hdx.o.
+
+CONFIG_SOUNDMODEM
+  This experimental driver allows a standard Sound Blaster or
+  WindowsSoundSystem compatible sound card to be used as a packet
+  radio modem (NOT as a telephone modem!), to send digital traffic
+  over amateur radio.
+
+  To configure the driver, use the sethdlc, smdiag and smmixer
+  utilities available in the standard ax25 utilities package. For
+  information on how to key the transmitter, see
+  <http://www.ife.ee.ethz.ch/~sailer/pcf/ptt_circ/ptt.html> and
+  <file:Documentation/networking/soundmodem.txt>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  This is
+  recommended.  The module will be called soundmodem.o.
+
+CONFIG_SOUNDMODEM_SBC
+  This option enables the soundmodem driver to use Sound Blaster and
+  compatible cards. If you have a dual mode card (i.e. a WSS cards
+  with a Sound Blaster emulation) you should say N here and Y to
+  "Sound card modem support for WSS and Crystal cards", below, because
+  this usually results in better performance. This option also
+  supports SB16/32/64 in full-duplex mode.
+
+CONFIG_SOUNDMODEM_WSS
+  This option enables the soundmodem driver to use WindowsSoundSystem
+  compatible cards. These cards feature a codec chip from either
+  Analog Devices (such as AD1848, AD1845, AD1812) or Crystal
+  Semiconductors (such as CS4248, CS423x). This option also supports
+  the WSS full-duplex operation which currently works with Crystal
+  CS423x chips. If you don't need full-duplex operation, do not enable
+  it to save performance.
+
+CONFIG_SOUNDMODEM_AFSK1200
+  This option enables the soundmodem driver 1200 baud AFSK modem,
+  compatible to popular modems using TCM3105 or AM7911. The
+  demodulator requires about 12% of the CPU power of a Pentium 75 CPU
+  per channel.
+
+CONFIG_SOUNDMODEM_AFSK2400_7
+  This option enables the soundmodem driver 2400 baud AFSK modem,
+  compatible to TCM3105 modems (over-)clocked with a 7.3728MHz
+  crystal. Note that the availability of this driver does _not_ imply
+  that I recommend building such links. It is only here since users
+  especially in eastern Europe have asked me to do so. In fact this
+  modulation scheme has many disadvantages, mainly its incompatibility
+  with many transceiver designs and the fact that the TCM3105 (if
+  used) is operated widely outside its specifications.
+
+CONFIG_SOUNDMODEM_AFSK2400_8
+  This option enables the soundmodem driver 2400 baud AFSK modem,
+  compatible to TCM3105 modems (over-)clocked with an 8MHz crystal.
+  Note that the availability of this driver does _not_ imply that I
+  recommend building such links. It is only here since users
+  especially in eastern Europe have asked me to do so. In fact this
+  modulation scheme has many disadvantages, mainly its incompatibility
+  with many transceiver designs and the fact that the TCM3105 (if
+  used) is operated widely outside its specifications.
+
+CONFIG_SOUNDMODEM_AFSK2666
+  This option enables the soundmodem driver 2666 baud AFSK modem.
+  This modem is experimental, and not compatible to anything
+  else I know of.
+
+CONFIG_SOUNDMODEM_PSK4800
+  This option enables the soundmodem driver 4800 baud 8PSK modem.
+  This modem is experimental, and not compatible to anything
+  else I know of.
+
+CONFIG_SOUNDMODEM_HAPN4800
+  This option enables the soundmodem driver 4800 baud HAPN-1
+  compatible modem. This modulation seems to be widely used 'down
+  under' and in the Netherlands. Here, nobody uses it, so I could not
+  test if it works. It is compatible to itself, however :-)
+
+CONFIG_SOUNDMODEM_FSK9600
+  This option enables the soundmodem driver 9600 baud FSK modem,
+  compatible to the G3RUH standard. The demodulator requires about 4%
+  of the CPU power of a Pentium 75 CPU per channel. You can say Y to
+  both 1200 baud AFSK and 9600 baud FSK if you want (but obviously you
+  can only use one protocol at a time, depending on what the other end
+  can understand).
+
diff -urN linux-2.5.3-pre4/drivers/net/irda/Config.help linux/drivers/net/irda/Config.help
--- linux-2.5.3-pre4/drivers/net/irda/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/irda/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,147 @@
+CONFIG_IRTTY_SIR
+  Say Y here if you want to build support for the IrTTY line
+  discipline.  If you want to compile it as a module (irtty.o), say M
+  here and read <file:Documentation/modules.txt>.  IrTTY makes it
+  possible to use Linux's own serial driver for all IrDA ports that
+  are 16550 compatible.  Most IrDA chips are 16550 compatible so you
+  should probably say Y to this option.  Using IrTTY will however
+  limit the speed of the connection to 115200 bps (IrDA SIR mode).
+
+  If unsure, say Y.
+
+CONFIG_IRPORT_SIR
+  Say Y here if you want to build support for the IrPORT IrDA device
+  driver. If you want to compile it as a module (irport.o), say M here
+  and read <file:Documentation/modules.txt>.  IrPORT can be used
+  instead of IrTTY and sometimes this can be better.  One example is
+  if your IrDA port does not have echo-canceling, which will work OK
+  with IrPORT since this driver is working in half-duplex mode only.
+  You don't need to use irattach with IrPORT, but you just insert it
+  the same way as FIR drivers (insmod irport io=0x3e8 irq=11).  Notice
+  that IrPORT is a SIR device driver which means that speed is limited
+  to 115200 bps.
+
+  If unsure, say Y.
+
+CONFIG_USB_IRDA
+  Say Y here if you want to build support for the USB IrDA FIR Dongle
+  device driver.  If you want to compile it as a module (irda-usb.o),
+  say M here and read <file:Documentation/modules.txt>.  IrDA-USB
+  support the various IrDA USB dongles available and most of their
+  pecularities.  Those dongles plug in the USB port of your computer,
+  are plug and play, and support SIR and FIR (4Mbps) speeds.  On the
+  other hand, those dongles tend to be less efficient than a FIR
+  chipset.
+
+  Please note that the driver is still experimental.  And of course,
+  you will need both USB and IrDA support in your kernel...
+
+CONFIG_WINBOND_FIR
+  Say Y here if you want to build IrDA support for the Winbond
+  W83977AF super-io chipset.  This driver should be used for the IrDA
+  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
+  FIR (4Mbps) speeds.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  w83977af_ir.o.
+
+CONFIG_NSC_FIR
+  Say Y here if you want to build support for the NSC PC87108 and
+  PC87338 IrDA chipsets.  This driver supports SIR,
+  MIR and FIR (4Mbps) speeds.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  nsc-ircc.o.
+
+CONFIG_TOSHIBA_FIR
+  Say Y here if you want to build support for the Toshiba Type-O IR
+  chipset.  This chipset is used by the Toshiba Libretto 100CT, and
+  many more laptops.  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.  The module will be
+  called toshoboe.o.
+
+CONFIG_SMC_IRCC_FIR
+  Say Y here if you want to build support for the SMC Infrared
+  Communications Controller.  It is used in the Fujitsu Lifebook 635t
+  and Sony PCG-505TX.  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.  The module will be
+  called smc-ircc.o.
+
+CONFIG_ALI_FIR
+  Say Y here if you want to build support for the ALi M5123 FIR
+  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
+  M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports
+  SIR, MIR and FIR (4Mbps) speeds.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  ali-ircc.o.
+
+CONFIG_VLSI_FIR
+  Say Y here if you want to build support for the VLSI 82C147
+  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+  and 5500 notebooks. The driver provides support for SIR, MIR and
+  FIR (4Mbps) speeds.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>. The module will be called vlsi_ir.o.
+
+CONFIG_DONGLE
+  Say Y here if you have an infrared device that connects to your
+  computer's serial port. These devices are called dongles. Then say Y
+  or M to the driver for your particular dongle below.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about serial dongles.
+
+CONFIG_ESI_DONGLE
+  Say Y here if you want to build support for the Extended Systems
+  JetEye PC dongle.  If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.  The ESI dongle attaches
+  to the normal 9-pin serial port connector, and can currently only be
+  used by IrTTY.  To activate support for ESI dongles you will have to
+  start irattach like this: "irattach -d esi".
+
+CONFIG_ACTISYS_DONGLE
+  Say Y here if you want to build support for the ACTiSYS IR-220L and
+  IR220L+ dongles.  If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.  The ACTiSYS dongles
+  attaches to the normal 9-pin serial port connector, and can
+  currently only be used by IrTTY.  To activate support for ACTiSYS
+  dongles you will have to start irattach like this:
+  "irattach -d actisys" or "irattach -d actisys+".
+
+CONFIG_TEKRAM_DONGLE
+  Say Y here if you want to build support for the Tekram IrMate 210B
+  dongle.  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The Tekram dongle attaches to the
+  normal 9-pin serial port connector, and can currently only be used
+  by IrTTY.  To activate support for Tekram dongles you will have to
+  start irattach like this: "irattach -d tekram".
+
+CONFIG_GIRBIL_DONGLE
+  Say Y here if you want to build support for the Greenwich GIrBIL
+  dongle.  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The Greenwich dongle attaches to
+  the normal 9-pin serial port connector, and can currently only be
+  used by IrTTY.  To activate support for Greenwich dongles you will
+  have to insert "irattach -d girbil" in the /etc/irda/drivers script.
+
+CONFIG_LITELINK_DONGLE
+  Say Y here if you want to build support for the Parallax Litelink
+  dongle.  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The Parallax dongle attaches to
+  the normal 9-pin serial port connector, and can currently only be
+  used by IrTTY.  To activate support for Parallax dongles you will
+  have to start irattach like this "irattach -d litelink".
+
+CONFIG_OLD_BELKIN_DONGLE
+  Say Y here if you want to build support for the Adaptec Airport 1000
+  and 2000 dongles.  If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.  The module will be
+  called old_belkin.o.  Some information is contained in the comments
+  at the top of <file:drivers/net/irda/old_belkin.c>.
+
diff -urN linux-2.5.3-pre4/drivers/net/mii.c linux/drivers/net/mii.c
--- linux-2.5.3-pre4/drivers/net/mii.c	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/mii.c	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,174 @@
+/*
+
+	mii.c: MII interface library
+
+	Maintained by Jeff Garzik <jgarzik@mandrakesoft.com>
+	Copyright 2001 Jeff Garzik
+
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+	struct net_device *dev = mii->dev;
+	u32 advert, bmcr, lpa, nego;
+
+	ecmd->supported =
+	    (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+	     SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+	     SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+
+	/* only supports twisted-pair */
+	ecmd->port = PORT_MII;
+
+	/* only supports internal transceiver */
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	/* this isn't fully supported at higher layers */
+	ecmd->phy_address = mii->phy_id;
+
+	ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+	advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+	if (advert & ADVERTISE_10HALF)
+		ecmd->advertising |= ADVERTISED_10baseT_Half;
+	if (advert & ADVERTISE_10FULL)
+		ecmd->advertising |= ADVERTISED_10baseT_Full;
+	if (advert & ADVERTISE_100HALF)
+		ecmd->advertising |= ADVERTISED_100baseT_Half;
+	if (advert & ADVERTISE_100FULL)
+		ecmd->advertising |= ADVERTISED_100baseT_Full;
+
+	bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+	lpa = mii->mdio_read(dev, mii->phy_id, MII_LPA);
+	if (bmcr & BMCR_ANENABLE) {
+		ecmd->advertising |= ADVERTISED_Autoneg;
+		ecmd->autoneg = AUTONEG_ENABLE;
+		
+		nego = mii_nway_result(advert & lpa);
+		if (nego == LPA_100FULL || nego == LPA_100HALF)
+			ecmd->speed = SPEED_100;
+		else
+			ecmd->speed = SPEED_10;
+		if (nego == LPA_100FULL || nego == LPA_10FULL) {
+			ecmd->duplex = DUPLEX_FULL;
+			mii->full_duplex = 1;
+		} else {
+			ecmd->duplex = DUPLEX_HALF;
+			mii->full_duplex = 0;
+		}
+	} else {
+		ecmd->autoneg = AUTONEG_DISABLE;
+
+		ecmd->speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+	}
+
+	/* ignore maxtxpkt, maxrxpkt for now */
+
+	return 0;
+}
+
+int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
+{
+	struct net_device *dev = mii->dev;
+
+	if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+		return -EINVAL;
+	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+		return -EINVAL;
+	if (ecmd->port != PORT_MII)
+		return -EINVAL;
+	if (ecmd->transceiver != XCVR_INTERNAL)
+		return -EINVAL;
+	if (ecmd->phy_address != mii->phy_id)
+		return -EINVAL;
+	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+				  
+	/* ignore supported, maxtxpkt, maxrxpkt */
+	
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		u32 bmcr, advert, tmp;
+
+		if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
+					  ADVERTISED_10baseT_Full |
+					  ADVERTISED_100baseT_Half |
+					  ADVERTISED_100baseT_Full)) == 0)
+			return -EINVAL;
+
+		/* advertise only what has been requested */
+		advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+		tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+		if (ADVERTISED_10baseT_Half)
+			tmp |= ADVERTISE_10HALF;
+		if (ADVERTISED_10baseT_Full)
+			tmp |= ADVERTISE_10FULL;
+		if (ADVERTISED_100baseT_Half)
+			tmp |= ADVERTISE_100HALF;
+		if (ADVERTISED_100baseT_Full)
+			tmp |= ADVERTISE_100FULL;
+		if (advert != tmp) {
+			mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
+			mii->advertising = tmp;
+		}
+		
+		/* turn on autonegotiation, and force a renegotiate */
+		bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
+
+		mii->duplex_lock = 0;
+	} else {
+		u32 bmcr, tmp;
+
+		/* turn off auto negotiation, set speed and duplexity */
+		bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+		tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+		if (ecmd->speed == SPEED_100)
+			bmcr |= BMCR_SPEED100;
+		if (ecmd->duplex == DUPLEX_FULL) {
+			bmcr |= BMCR_FULLDPLX;
+			mii->full_duplex = 1;
+		} else
+			mii->full_duplex = 0;
+		if (bmcr != tmp)
+			mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
+
+		mii->duplex_lock = 1;
+	}
+	return 0;
+}
+
+int mii_link_ok (struct mii_if_info *mii)
+{
+	if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
+		return 1;
+	return 0;
+}
+
+int mii_nway_restart (struct mii_if_info *mii)
+{
+	int bmcr;
+	int r = -EINVAL;
+
+	/* if autoneg is off, it's an error */
+	bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
+
+	if (bmcr & BMCR_ANENABLE) {
+		bmcr |= BMCR_ANRESTART;
+		mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
+		r = 0;
+	}
+
+	return r;
+}
+
+EXPORT_SYMBOL(mii_link_ok);
+EXPORT_SYMBOL(mii_nway_restart);
+EXPORT_SYMBOL(mii_ethtool_gset);
+EXPORT_SYMBOL(mii_ethtool_sset);
diff -urN linux-2.5.3-pre4/drivers/net/pcmcia/Config.help linux/drivers/net/pcmcia/Config.help
--- linux-2.5.3-pre4/drivers/net/pcmcia/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/pcmcia/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,149 @@
+CONFIG_AIRONET4500_CS
+  Say Y here if you have a PCMCIA Aironet 4500/4800 card which you
+  want to use with the standard PCMCIA cardservices provided by the
+  pcmcia-cs package.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aironet4500_cs.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_NET_PCMCIA
+  Say Y if you would like to include support for any PCMCIA or CardBus
+  network adapters, then say Y to the driver for your particular card
+  below.  PCMCIA- or PC-cards are credit-card size devices often used
+  with laptops computers; CardBus is the newer and faster version of
+  PCMCIA.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  You also want to check out the PCMCIA-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If unsure, say N.
+
+CONFIG_PCMCIA_3C589
+  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+  (PC-card) Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c589_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>. If
+  unsure, say N.
+
+CONFIG_PCMCIA_3C574
+  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+  (PC-card) Fast Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 3c574_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_PCMCIA_FMVJ18X
+  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+  PCMCIA (PC-card) Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called fmvj18x_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
+CONFIG_PCMCIA_PCNET
+  Say Y here if you intend to attach an NE2000 compatible PCMCIA
+  (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pcnet_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>. If
+  unsure, say N.
+
+CONFIG_PCMCIA_NMCLAN
+  Say Y here if you intend to attach a New Media Ethernet or LiveWire
+  PCMCIA (PC-card) Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called nmclan_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_PCMCIA_SMC91C92
+  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
+  (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smc91c92_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
+CONFIG_PCMCIA_XIRC2PS
+  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
+  Ethernet or Fast Ethernet card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called xirc2ps_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
+CONFIG_ARCNET_COM20020_CS
+  Say Y here if you intend to attach this type of ARCnet PCMCIA card
+  to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called com20020_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
+CONFIG_PCMCIA_IBMTR
+  Say Y here if you intend to attach this type of Token Ring PCMCIA
+  card to your computer. You then also need to say Y to "Token Ring
+  driver support".
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ibmtr_cs.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_PCMCIA_XIRTULIP
+  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
+  It should work with most DEC 21*4*-based chips/ethercards, as well
+  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
+  ASIX.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called xircom_tulip_cb.o.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>. If unsure, say N.
+
+CONFIG_NET_PCMCIA_RADIO
+  Say Y here if you would like to use a PCMCIA (PC-card) device to
+  connect to a wireless local area network. Then say Y to the driver
+  for your particular card below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location). You also want to check out the PCMCIA-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_PCMCIA_RAYCS
+  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+  (PC-card) wireless Ethernet networking card to your computer.
+  Please read the file <file:Documentation/networking/ray_cs.txt> for
+  details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ray_cs.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/net/sundance.c linux/drivers/net/sundance.c
--- linux-2.5.3-pre4/drivers/net/sundance.c	Thu Jan 10 16:23:45 2002
+++ linux/drivers/net/sundance.c	Thu Jan 24 12:35:36 2002
@@ -16,11 +16,16 @@
 
 	Support and updates available at
 	http://www.scyld.com/network/sundance.html
+
+
+	Version 1.01a (jgarzik):
+	- Replace some MII-related magic numbers with constants
+
 */
 
 #define DRV_NAME	"sundance"
-#define DRV_VERSION	"1.01"
-#define DRV_RELDATE	"4/09/00"
+#define DRV_VERSION	"1.01a"
+#define DRV_RELDATE	"11-Nov-2001"
 
 
 /* The user-configurable values.
@@ -443,7 +448,7 @@
 	int irq;
 	int i;
 	long ioaddr;
-	u16 mii_reg0;
+	u16 mii_ctl;
 	void *ring_space;
 	dma_addr_t ring_dma;
 
@@ -582,15 +587,15 @@
 		}
 	}
 	/* Reset PHY */
-	mdio_write (dev, np->phys[0], 0, 0x8000);
+	mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET);
 	mdelay (300);
-	mdio_write (dev, np->phys[0], 0, 0x1200);
+	mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
 	/* Force media type */
 	if (!np->an_enable) {
-		mii_reg0 = 0;
-		mii_reg0 |= (np->speed == 100) ? 0x2000 : 0;
-		mii_reg0 |= (np->full_duplex) ? 0x0100 : 0;
-		mdio_write (dev, np->phys[0], 0, mii_reg0);
+		mii_ctl = 0;
+		mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0;
+		mii_ctl |= (np->full_duplex) ? BMCR_FULLDPLX : 0;
+		mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl);
 		printk (KERN_INFO "Override speed=%d, %s duplex\n",
 			np->speed, np->full_duplex ? "Full" : "Half");
 
@@ -798,12 +803,12 @@
 {
 	struct netdev_private *np = dev->priv;
 	long ioaddr = dev->base_addr;
-	int mii_reg5 = mdio_read(dev, np->phys[0], 5);
-	int negotiated = mii_reg5 & np->advertising;
+	int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA);
+	int negotiated = mii_lpa & np->advertising;
 	int duplex;
 	
 	/* Force media */
-	if (!np->an_enable || mii_reg5 == 0xffff) {
+	if (!np->an_enable || mii_lpa == 0xffff) {
 		if (np->full_duplex)
 			writew (readw (ioaddr + MACCtrl0) | EnbFullDuplex,
 				ioaddr + MACCtrl0);
@@ -1184,7 +1189,7 @@
 {
 	long ioaddr = dev->base_addr;
 	struct netdev_private *np = dev->priv;
-	u16 mii_reg0, mii_reg4, mii_reg5;
+	u16 mii_ctl, mii_advertise, mii_lpa;
 	int speed;
 
 	if (intr_status & IntrDrvRqst) {
@@ -1200,27 +1205,27 @@
 	}
 	if (intr_status & LinkChange) {
 		if (np->an_enable) {
-			mii_reg4 = mdio_read (dev, np->phys[0], 4);
-			mii_reg5= mdio_read (dev, np->phys[0], 5);
-			mii_reg4 &= mii_reg5;
+			mii_advertise = mdio_read (dev, np->phys[0], MII_ADVERTISE);
+			mii_lpa= mdio_read (dev, np->phys[0], MII_LPA);
+			mii_advertise &= mii_lpa;
 			printk (KERN_INFO "%s: Link changed: ", dev->name);
-			if (mii_reg4 & 0x0100)
+			if (mii_advertise & ADVERTISE_100FULL)
 				printk ("100Mbps, full duplex\n");
-			else if (mii_reg4 & 0x0080)
+			else if (mii_advertise & ADVERTISE_100HALF)
 				printk ("100Mbps, half duplex\n");
-			else if (mii_reg4 & 0x0040)
+			else if (mii_advertise & ADVERTISE_10FULL)
 				printk ("10Mbps, full duplex\n");
-			else if (mii_reg4 & 0x0020)
+			else if (mii_advertise & ADVERTISE_10HALF)
 				printk ("10Mbps, half duplex\n");
 			else
 				printk ("\n");
 
 		} else {
-			mii_reg0 = mdio_read (dev, np->phys[0], 0);
-			speed = (mii_reg0 & 0x2000) ? 100 : 10;
+			mii_ctl = mdio_read (dev, np->phys[0], MII_BMCR);
+			speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10;
 			printk (KERN_INFO "%s: Link changed: %dMbps ,",
 				dev->name, speed);
-			printk ("%s duplex.\n", (mii_reg0 & 0x0100) ?
+			printk ("%s duplex.\n", (mii_ctl & BMCR_FULLDPLX) ?
 				"full" : "half");
 		}
 		check_duplex (dev);
diff -urN linux-2.5.3-pre4/drivers/net/tokenring/Config.help linux/drivers/net/tokenring/Config.help
--- linux-2.5.3-pre4/drivers/net/tokenring/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/tokenring/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,131 @@
+CONFIG_TR
+  Token Ring is IBM's way of communication on a local network; the
+  rest of the world uses Ethernet. To participate on a Token Ring
+  network, you need a special Token ring network card. If you are
+  connected to such a Token Ring network and want to use your Token
+  Ring card under Linux, say Y here and to the driver for your
+  particular card below and read the Token-Ring mini-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>. Most people can
+  say N here.
+
+CONFIG_IBMTR
+  This is support for all IBM Token Ring cards that don't use DMA. If
+  you have such a beast, say Y and read the Token-Ring mini-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  Warning: this driver will almost definitely fail if more than one
+  active Token Ring card is present.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ibmtr.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_IBMOL
+  This is support for all non-Lanstreamer IBM PCI Token Ring Cards.
+  Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II
+  Wake On Lan, and PCI 100/16/4 adapters.
+
+  If you have such an adapter, say Y and read the Token-Ring
+  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called olympic.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  Also read <file:Documentation/networking/olympic.txt> or check the
+  Linux Token Ring Project site for the latest information at
+  <http://www.linuxtr.net/>.
+
+CONFIG_IBMLS
+  This is support for IBM Lanstreamer PCI Token Ring Cards.
+
+  If you have such an adapter, say Y and read the Token-Ring
+  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a modules ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The modules will be called lanstreamer.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_TMS380TR
+  This driver provides generic support for token ring adapters
+  based on the Texas Instruments TMS380 series chipsets.  This
+  includes the SysKonnect TR4/16(+) ISA (SK-4190), SysKonnect
+  TR4/16(+) PCI (SK-4590), SysKonnect TR4/16 PCI (SK-4591),
+  Compaq 4/16 PCI, Thomas-Conrad TC4048 4/16 PCI, and several
+  Madge adapters.  If you say Y here, you will be asked to select
+  which cards to support below.  If you're using modules, each
+  class of card will be supported by a separate module.
+
+  If you have such an adapter and would like to use it, say Y and
+  read the Token-Ring mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Also read the file <file:Documentation/networking/tms380tr.txt> or
+  check <http://www.auk.cx/tms380tr/>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tms380tr.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_TMSPCI
+  This tms380 module supports generic TMS380-based PCI cards.
+
+  These cards are known to work:
+     - Compaq 4/16 TR PCI
+     - SysKonnect TR4/16 PCI (SK-4590/SK-4591)
+     - Thomas-Conrad TC4048 PCI 4/16
+     - 3Com Token Link Velocity
+
+  This driver is available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tmspci.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_TMSISA
+  This tms380 module supports generic TMS380-based ISA cards.
+
+  These cards are known to work:
+     - SysKonnect TR4/16 ISA (SK-4190)
+
+  This driver is available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tmsisa.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ABYSS
+  This tms380 module supports the Madge Smart 16/4 PCI Mk2
+  cards (51-02).
+
+  This driver is available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called abyss.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_MADGEMC
+  This tms380 module supports the Madge Smart 16/4 MC16 and MC32
+  MicroChannel adapters.
+
+  This driver is available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called madgemc.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SMCTR
+  This is support for the ISA and MCA SMC Token Ring cards,
+  specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A
+  (8115T/A) adapters.
+
+  If you have such an adapter and would like to use it, say Y or M and
+  read the Token-Ring mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto> and the file
+  <file:Documentation/networking/smctr.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called smctr.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/net/wan/Config.help linux/drivers/net/wan/Config.help
--- linux-2.5.3-pre4/drivers/net/wan/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/wan/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,427 @@
+CONFIG_LAPBETHER
+  This is a driver for a pseudo device (typically called /dev/lapb0)
+  which allows you to open an LAPB point-to-point connection to some
+  other computer on your Ethernet network.  In order to do this, you
+  need to say Y or M to the driver for your Ethernet card as well as
+  to "LAPB Data Link Driver".
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called lapbether.o.  If unsure, say N.
+
+CONFIG_X25_ASY
+  This is a driver for sending and receiving X.25 frames over regular
+  asynchronous serial lines such as telephone lines equipped with
+  ordinary modems.  Experts should note that this driver doesn't
+  currently comply with the asynchronous HDLS framing protocols in
+  CCITT recommendation X.25.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called x25_asy.o.  If unsure, say N.
+
+CONFIG_SEALEVEL_4021
+  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
+
+  This driver can only be compiled as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to do that, say M here. The module will be called
+  sealevel.o.
+
+CONFIG_SYNCLINK_SYNCPPP
+  Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
+  Normally the SyncLink WAN driver works with the main PPP
+  driver (ppp.c) and pppd program. HDLC/SYNCPPP support allows use
+  of the Cisco HDLC/PPP driver (syncppp.c).
+  The SyncLink WAN driver (in character devices) must also be enabled.
+
+CONFIG_FARSYNC
+  This driver supports the FarSync T-Series X.21 (and V.35/V.24) cards
+  from FarSite Communications Ltd.
+  Synchronous communication is supported on all ports at speeds up to
+  8Mb/s (128K on V.24) using synchronous PPP or Cisco HDLC.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  say M here and read <file:Documentation/modules.txt>.
+  The module will be called farsync.o and if you want the module to be
+  automatically loaded when the interface is referenced then you
+  should add "alias syncX farsync" to /etc/modules.conf for each
+  interface, where X is 0, 1, 2, ...
+
+CONFIG_DLCI
+  This is support for the frame relay protocol; frame relay is a fast
+  low-cost way to connect to a remote Internet access provider or to
+  form a private wide area network. The one physical line from your
+  box to the local "switch" (i.e. the entry point to the frame relay
+  network, usually at the phone company) can carry several logical
+  point-to-point connections to other computers connected to the frame
+  relay network. For a general explanation of the protocol, check out
+  <http://www.frforum.com/> on the WWW. To use frame relay, you need
+  supporting hardware (called FRAD) and certain programs from the
+  net-tools package as explained in
+  <file:Documentation/networking/framerelay.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dlci.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_DLCI_COUNT
+  This is the maximal number of logical point-to-point frame relay
+  connections (the identifiers of which are called DCLIs) that
+  the driver can handle. The default is probably fine.
+
+CONFIG_DLCI_MAX
+  You can specify here how many logical point-to-point frame relay
+  connections (the identifiers of which are called DCLIs) should be
+  handled by each of your hardware frame relay access devices. Go with
+  the default.
+
+CONFIG_SDLA
+  Say Y here if you need a driver for the Sangoma S502A, S502E, and
+  S508 Frame Relay Access Devices. These are multi-protocol cards, but
+  only frame relay is supported by the driver at this time. Please
+  read <file:Documentation/framerelay.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sdla.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_WAN
+  Wide Area Networks (WANs), such as X.25, frame relay and leased
+  lines, are used to interconnect Local Area Networks (LANs) over vast
+  distances with data transfer rates significantly higher than those
+  achievable with commonly used asynchronous modem connections.
+  Usually, a quite expensive external device called a `WAN router' is
+  needed to connect to a WAN.
+
+  As an alternative, a relatively inexpensive WAN interface card can
+  allow your Linux box to directly connect to a WAN. If you have one
+  of those cards and wish to use it under Linux, say Y here and also
+  to the WAN driver for your card, below.
+
+  If unsure, say N.
+
+CONFIG_HOSTESS_SV11
+  This is a network card for low speed synchronous serial links, at
+  up to 256Kbps. It supports both PPP and Cisco HDLC.
+
+  At this point, the driver can only be compiled as a module.
+
+CONFIG_COSA
+  This is a driver for COSA and SRP synchronous serial boards. These
+  boards allow to connect synchronous serial devices (for example
+  base-band modems, or any other device with the X.21, V.24, V.35 or
+  V.36 interface) to your Linux box. The cards can work as the
+  character device, synchronous PPP network device, or the Cisco HDLC
+  network device.
+
+  To actually use the COSA or SRP board, you will need user-space
+  utilities for downloading the firmware to the cards and to set them
+  up. Look at the <http://www.fi.muni.cz/~kas/cosa/> for more
+  information about the cards (including the pointer to the user-space
+  utilities). You can also read the comment at the top of the
+  <file:drivers/net/wan/cosa.c> for details about the cards and the driver
+  itself.
+
+  The driver will be compiled as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cosa.o. For general information about
+  modules read <file:Documentation/modules.txt>.
+
+CONFIG_DSCC4
+  This is a driver for Etinc PCISYNC boards based on the Infineon
+  (ex. Siemens) DSCC4 chipset. It is supposed to work with the four
+  ports card. Take a look at <http://www.cogenit.fr/dscc4/>
+  for further informations about the driver and his configuration.
+
+  The driver will be compiled as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dscc4.o. For general information about
+  modules read <file:Documentation/modules.txt>.
+
+CONFIG_LANMEDIA
+  This is a driver for the following Lan Media family of serial
+  boards.
+
+  LMC 1000 board allows you to connect synchronous serial devices (for
+  example base-band modems, or any other device with the X.21, V.24,
+  V.35 or V.36 interface) to your Linux box.
+
+  LMC 1200 with on board DSU board allows you to connect your Linux
+  box dirrectly to a T1 or E1 circuit.
+
+  LMC 5200 board provides a HSSI interface capable of running up to
+  52 mbits per second.
+
+  LMC 5245 board connects directly to a T3 circuit saving the
+  additional external hardware.
+
+  To change setting such as syncPPP vs cisco HDLC or clock source you
+  will need lmcctl.  It is available at <ftp://ftp.lanmedia.com/>.
+
+  This code is also available as a module called lmc.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SBNI
+  This is a driver for ISA SBNI12-xx cards which are low cost
+  alternatives to leased line modems. Say Y if you want to insert
+  the driver into the kernel or say M to compile it as a module (the
+  module will be called sbni.o).
+
+  You can find more information and last versions of drivers and
+  utilities at <http://www.granch.ru/>. If you have any question you
+  can send email to sbni@granch.ru.
+
+  Say N if unsure.
+
+CONFIG_SBNI_MULTILINE
+  Schedule traffic for some parallel lines, via SBNI12 adapters.
+  If you have two computers connected with two parallel lines it's
+  possible to increase transfer rate nearly twice. You should have
+  a program named 'sbniconfig' to configure adapters.
+
+  Say N if unsure.
+
+CONFIG_WAN_ROUTER_DRIVERS
+  If you have a WAN interface card and you want your Linux box to act
+  as a WAN router, thereby connecting you Local Area Network to the
+  outside world over the WAN connection, say Y here and then to the
+  driver for your card below. In addition, you need to say Y to "Wan
+  Router".
+
+  You will need the wan-tools package which is available from
+  <ftp://ftp.sangoma.com/>. Read
+  <file:Documentation/networking/wan-router.txt> for more information.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about WAN router drivers. If unsure, say N.
+
+CONFIG_VENDOR_SANGOMA
+  WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
+  is a family of intelligent multiprotocol WAN adapters with data
+  transfer rates up to 4Mbps. They are also known as Synchronous
+  Data Link Adapters (SDLA) and are designated as S514-PCI or
+  S508-ISA.  These cards support
+
+    - X.25, Frame Relay, PPP, Cisco HDLC protocols.
+
+    - API support for protocols like HDLC (LAPB),
+      HDLC Streaming, X.25, Frame Relay and BiSync.
+
+    - Ethernet Bridging over Frame Relay protocol.
+
+    - MULTILINK PPP
+
+    - Async PPP (Modem Dialup)
+
+  If you have one or more of these cards, say M to this option; you
+  may then also want to read the file
+  <file:Documentation/networking/wanpipe.txt>.  The next questions
+  will ask you about the protocols you want the driver to support.
+
+  The driver will be compiled as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wanpipe.o.  For general information about
+  modules read <file:Documentation/modules.txt>.
+
+CONFIG_WANPIPE_X25
+  Say Y to this option if you are planning to connect a WANPIPE card
+  to an X.25 network.  Note, this feature also includes the X.25 API
+  support used to develope custom applications over the X.25 protocol.
+  If you say N, the X.25 support will not be included in the driver.
+  The X.25 option is supported on S514-PCI and S508-ISA cards.
+
+CONFIG_WANPIPE_FR
+  Say Y to this option if you are planning to connect a WANPIPE card
+  to a frame relay network, or use frame relay API to develope
+  custom applications over the Frame  Relay protocol.
+  This feature also contains the Ethernet Bridging over Frame Relay,
+  where a WANPIPE frame relay link can be directly connected to the
+  Linux kernel bridge.  If you say N, the frame relay support will
+  not be included in the driver. The Frame Relay option is
+  supported on S514-PCI and S508-ISA cards.
+
+CONFIG_WANPIPE_PPP
+  Say Y to this option if you are planning to connect a WANPIPE card
+  to a leased line using Point-to-Point protocol (PPP). If you say N,
+  the PPP support will not be included in the driver. The PPP option
+  is supported on S514-PCI/S508-ISA cards.
+
+CONFIG_WANPIPE_MULTPPP
+  Say Y to this option if you are planning to connect a WANPIPE card
+  to a leased line using Point-to-Point protocol (PPP).  Note, the
+  MultiPort PPP uses the Linux Kernel SyncPPP protocol over the
+  Sangoma HDLC Streaming adapter.  In this case each Sangoma adapter
+  port can support an independent PPP connection.  For example, a
+  single Quad-Port PCI adapter can support up to four independent
+  PPP links. If you say N,the PPP support will not be included in the
+  driver.  The PPP option is supported on S514-PCI/S508-ISA cards.
+
+CONFIG_WANPIPE_CHDLC
+  Say Y to this option if you are planning to connect a WANPIPE card
+  to a leased line using the Cisco HDLC protocol. This now supports
+  Dual Port Cisco HDLC on the S514-PCI/S508-ISA cards.
+  This support also allows user to build applications using the
+  HDLC streaming API.
+
+  CHDLC Streaming driver also supports MULTILINK PPP
+  support that can bind multiple WANPIPE T1 cards into
+  a single logical channel.
+
+  If you say  N, the Cisco HDLC support and
+  HDLC streaming API and MULTILINK PPP will not be
+  included in the driver.
+
+CONFIG_COMX
+  Say Y if you want to use any board from the MultiGate (COMX) family.
+  These boards are synchronous serial adapters for the PC,
+  manufactured by ITConsult-Pro Co, Hungary.
+
+  Read <file:Documentation/networking/comx.txt> for help on
+  configuring and using COMX interfaces.  Further info on these cards
+  can be found at <http://www.itc.hu/> or <info@itc.hu>.
+
+  You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
+  use this driver.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called comx.o.
+
+CONFIG_COMX_HW_COMX
+  Hardware driver for the 'CMX', 'COMX' and 'HiCOMX' boards from the
+  MultiGate family. Say Y if you have one of these.
+
+  You will need additional firmware to use these cards, which are
+  downloadable from <ftp://ftp.itc.hu/>.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  comx-hw-comx.o.
+
+CONFIG_COMX_HW_LOCOMX
+  Hardware driver for the 'LoCOMX' board from the MultiGate family.
+  Say Y if you have a board like this.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  comx-hw-locomx.o.
+
+CONFIG_COMX_HW_MIXCOM
+  Hardware driver for the 'MixCOM' board from the MultiGate family.
+  Say Y if you have a board like this.
+
+  If you want to use the watchdog device on this card, you should
+  select it in the Watchdog Cards section of the Character Devices
+  configuration. The ISDN interface of this card is Teles 16.3
+  compatible, you should enable it in the ISDN configuration menu. The
+  driver for the flash ROM of this card is available separately on
+  <ftp://ftp.itc.hu/>.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>. The module will be called
+  comx-hw-mixcom.o.
+
+CONFIG_COMX_PROTO_PPP
+  Cisco-HDLC and synchronous PPP protocol driver for all MultiGate
+  boards. Say Y if you want to use either protocol on your MultiGate
+  boards.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  comx-proto-ppp.o.
+
+CONFIG_COMX_PROTO_LAPB
+  LAPB protocol driver for all MultiGate boards. Say Y if you
+  want to use this protocol on your MultiGate boards.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  comx-proto-lapb.o.
+
+CONFIG_COMX_PROTO_FR
+  Frame Relay protocol driver for all MultiGate boards. Say Y if you
+  want to use this protocol on your MultiGate boards.
+
+  If you want to compile this as a module, say M and read
+  <file:Documentation/modules.txt>.  The module will be called
+  comx-proto-fr.o.
+
+CONFIG_CYCLADES_SYNC
+  Cyclom 2X from Cyclades Corporation (<http://www.cyclades.com/> and
+  <http://www.cyclades.com.br/>) is an intelligent multiprotocol WAN
+  adapter with data transfer rates up to 512 Kbps. These cards support
+  the X.25 and SNA related protocols. If you have one or more of these
+  cards, say Y to this option. The next questions will ask you about
+  the protocols you want the driver to support (for now only X.25 is
+  supported).
+
+  While no documentation is available at this time please grab the
+  wanconfig tarball in
+  <http://www.conectiva.com.br/~acme/cycsyn-devel/> (with minor changes
+  to make it compile with the current wanrouter include files; efforts
+  are being made to use the original package available at
+  <ftp://ftp.sangoma.com/>).
+
+  Feel free to contact me or the cycsyn-devel mailing list at
+  acme@conectiva.com.br and cycsyn-devel@bazar.conectiva.com.br for
+  additional details, I hope to have documentation available as soon
+  as possible. (Cyclades Brazil is writing the Documentation).
+
+  The driver will be compiled as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cyclomx.o. For general information about
+  modules read <file:Documentation/modules.txt>.
+
+CONFIG_CYCLOMX_X25
+  Say Y to this option if you are planning to connect a Cyclom 2X card
+  to an X.25 network.
+
+  If you say N, the X.25 support will not be included in the driver
+  (saves about 11 KB of kernel memory).
+
+CONFIG_HDLC
+  Say Y to this option if your Linux box contains a WAN card supported
+  by this driver and you are planning to connect the box to a WAN
+  ( = Wide Area Network). You will need supporting software from
+  <http://hq.pm.waw.pl/hdlc/>.
+  Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
+  Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
+
+  If unsure, say N here.
+
+CONFIG_HDLC_PPP
+  Say Y to this option if you want generic HDLC driver to support
+  PPP over WAN (Wide Area Network) connections.
+
+  If unsure, say N here.
+
+CONFIG_HDLC_X25
+  Say Y to this option if you want generic HDLC driver to support
+  X.25 protocol over WAN (Wide Area Network) connections.
+
+  If unsure, say N here.
+
+CONFIG_N2
+  This driver is for RISCom/N2 single or dual channel ISA cards
+  made by SDL Communications Inc.  If you have such a card,
+  say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>.
+
+  Note that N2csu and N2dds cards are not supported by this driver.
+
+  If unsure, say N here.
+
+CONFIG_C101
+  This driver is for C101 SuperSync ISA cards made by Moxa
+  Technologies Co., Ltd. If you have such a card,
+  say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>
+
+  If unsure, say N here.
+
diff -urN linux-2.5.3-pre4/drivers/net/wireless/Config.help linux/drivers/net/wireless/Config.help
--- linux-2.5.3-pre4/drivers/net/wireless/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/wireless/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,133 @@
+CONFIG_WAVELAN
+  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+  a Radio LAN (wireless Ethernet-like Local Area Network) using the
+  radio frequencies 900 MHz and 2.4 GHz.
+
+  This driver support the ISA version of the WaveLAN card.  A separate
+  driver for the PCMCIA (PC-card) hardware is available in David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).
+
+  If you want to use an ISA WaveLAN card under Linux, say Y and read
+  the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. Some more specific
+  information is contained in
+  <file:Documentation/networking/wavelan.txt> and in the source code
+  <file:drivers/net/wavelan.p.h>.
+
+  You will also need the wireless tools package available from
+  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+  Please read the man pages contained therein.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wavelan.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
+CONFIG_HERMES
+  A driver for 802.11b wireless cards based based on the "Hermes" or
+  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
+  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+  - except for the Cisco/Aironet cards.  Cards supported include the
+  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+  This option includes the guts of the driver, but in order to
+  actually use a card you will also need to enable support for PCMCIA
+  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
+
+  You will also very likely also need the Wireless Tools in order to
+  configure your card and that /etc/pcmcia/wireless.opts works :
+  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+
+CONFIG_PLX_HERMES
+  Enable support for PCMCIA cards supported by the "Hermes" (aka
+  orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These
+  adaptors are not a full PCMCIA controller but act as a more limited
+  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
+  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
+  MA301 is such an adaptor.
+
+  Support for these adaptors is so far still incomplete and buggy.
+  You have been warned.
+
+CONFIG_PCMCIA_HERMES
+  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
+  others).  It should also be usable on various Prism II based cards
+  such as the Linksys, D-Link and Farallon Skyline.  It should also
+  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  You also want to check out the PCMCIA-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  You will also very likely also need the Wireless Tools in order to
+  configure your card and that /etc/pcmcia/wireless.opts works:
+  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+CONFIG_AIRO
+  This is the standard Linux driver to support Cisco/Aironet ISA and
+  PCI 802.11 wireless cards.
+  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+  - with or without encryption) as well as card before the Cisco
+  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+  This driver support both the standard Linux Wireless Extensions
+  and Cisco proprietary API, so both the Linux Wireless Tools and the
+  Cisco Linux utilities can be used to configure the card.
+
+  The driver can be compiled as a module and will be named "airo.o".
+
+CONFIG_AIRO_CS
+  This is the standard Linux driver to support Cisco/Aironet PCMCIA
+  802.11 wireless cards.  This driver is the same as the Aironet
+  driver part of the Linux Pcmcia package.
+  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+  - with or without encryption) as well as card before the Cisco
+  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+  802.11b cards.
+
+  This driver support both the standard Linux Wireless Extensions
+  and Cisco proprietary API, so both the Linux Wireless Tools and the
+  Cisco Linux utilities can be used to configure the card.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  You also want to check out the PCMCIA-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_APPLE_AIRPORT
+  Say Y here to support the Airport 802.11b wireless Ethernet hardware
+  built into the Macintosh iBook and other recent PowerPC-based
+  Macintosh machines. This is essentially a Lucent Orinoco card with 
+  a non-standard interface
+
+CONFIG_PCMCIA_NETWAVE
+  Say Y here if you intend to attach this type of PCMCIA (PC-card)
+  wireless Ethernet networking card to your computer.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called netwave_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
+CONFIG_PCMCIA_WAVELAN
+  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+  (PC-card) wireless Ethernet networking card to your computer.  This
+  driver is for the non-IEEE-802.11 Wavelan cards.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wavelan_cs.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/parport/Config.help linux/drivers/parport/Config.help
--- linux-2.5.3-pre4/drivers/parport/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/parport/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,99 @@
+CONFIG_PARPORT
+  If you want to use devices connected to your machine's parallel port
+  (the connector at the computer with 25 holes), e.g. printer, ZIP
+  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+  create a mini network by connecting the parallel ports of two local
+  machines) etc., then you need to say Y here; please read
+  <file:Documentation/parport.txt> and
+  <file:drivers/parport/BUGS-parport>.
+
+  For extensive information about drivers for many devices attaching
+  to the parallel port see <http://www.torque.net/linux-pp.html> on
+  the WWW.
+
+  It is possible to share a single parallel port among several devices
+  and it is safe to compile all the corresponding drivers into the
+  kernel.  If you want to compile parallel port support as a module
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport.o.  If you have more than one parallel port and want to
+  specify which port and IRQ to be used by this driver at module load
+  time, take a look at <file:Documentation/parport.txt>.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_PC
+  You should say Y here if you have a PC-style parallel port. All IBM
+  PC compatible computers and some Alphas have PC-style parallel
+  ports.
+
+  This code is also available as a module.  If you want to compile it
+  as a module ( = code which can be inserted in and removed from the
+  running kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  parport_pc.o.
+
+  If unsure, say Y.
+
+CONFIG_PARPORT_SERIAL
+  This adds support for multi-IO PCI cards that have parallel and
+  serial ports.  You should say Y or M here.  If you say M, the module
+  will be called parport_serial.o.
+
+CONFIG_PARPORT_PC_FIFO
+  Many parallel port chipsets provide hardware that can speed up
+  printing. Say Y here if you want to take advantage of that.
+
+  As well as actually having a FIFO, or DMA capability, the kernel
+  will need to know which IRQ the parallel port has.  By default,
+  parallel port interrupts will not be used, and so neither will the
+  FIFO.  See <file:Documentation/parport.txt> to find out how to
+  specify which IRQ/DMA to use.
+
+CONFIG_PARPORT_PC_SUPERIO
+  Saying Y here enables some probes for Super-IO chipsets in order to
+  find out things like base addresses, IRQ lines and DMA channels.  It
+  is safe to say N.
+
+CONFIG_PARPORT_PC_PCMCIA
+  Say Y here if you need PCMCIA support for your PC-style parallel
+  ports. If unsure, say N.
+
+CONFIG_PARPORT_OTHER
+  Say Y here if you want to be able to load driver modules to support
+  other non-standard types of parallel ports. This causes a
+  performance loss, so most people say N.
+
+CONFIG_PARPORT_AMIGA
+  Say Y here if you need support for the parallel port hardware on
+  Amiga machines. This code is also available as a module (say M),
+  called parport_amiga.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_ATARI
+  Say Y here if you need support for the parallel port hardware on
+  Atari machines. This code is also available as a module (say M),
+  called parport_atari.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_MFC3
+  Say Y here if you need parallel port support for the MFC3 card.
+  This code is also available as a module (say M), called
+  parport_mfc3.o. If in doubt, saying N is the safe plan.
+
+CONFIG_PARPORT_1284
+  If you have a printer that supports status readback or device ID, or
+  want to use a device that uses enhanced parallel port transfer modes
+  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+  transfer modes. Also say Y if you want device ID information to
+  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+CONFIG_PARPORT_SUNBPP
+  This driver provides support for the bidirectional parallel port
+  found on many Sun machines. Note that many of the newer Ultras
+  actually have pc style hardware instead.
+
+CONFIG_PARPORT_GSC
+  Say Y here to build in low-level parallel-support for PC-style
+  hardware integrated in the LASI-Controller (on the GSC Bus) for
+  HP-PARISC workstations.
+
diff -urN linux-2.5.3-pre4/drivers/pci/Config.help linux/drivers/pci/Config.help
--- linux-2.5.3-pre4/drivers/pci/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/pci/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,12 @@
+CONFIG_PCI_NAMES
+  By default, the kernel contains a database of all known PCI device
+  names to make the information in /proc/pci, /proc/ioports and
+  similar files comprehensible to the user. This database increases
+  size of the kernel image by about 80KB, but it gets freed after the
+  system boots up, so it doesn't take up kernel memory. Anyway, if you
+  are building an installation floppy or kernel for an embedded system
+  where kernel image size really matters, you can disable this feature
+  and you'll get device ID numbers instead of names.
+
+  When in doubt, say Y.
+
diff -urN linux-2.5.3-pre4/drivers/pci/pci.c linux/drivers/pci/pci.c
--- linux-2.5.3-pre4/drivers/pci/pci.c	Thu Jan 24 12:35:17 2002
+++ linux/drivers/pci/pci.c	Thu Jan 24 12:35:36 2002
@@ -1064,7 +1064,6 @@
 		memset(b, 0, sizeof(*b));
 		INIT_LIST_HEAD(&b->children);
 		INIT_LIST_HEAD(&b->devices);
-		iobus_init(&b->iobus);
 	}
 	return b;
 }
@@ -1297,9 +1296,6 @@
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 
-	/* make sure generic fields are setup properly */
-	device_init_dev(&dev->dev);
-
 	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
 	   set this higher, assuming the system even supports it.  */
 	dev->dma_mask = 0xffffffff;
@@ -1370,7 +1366,6 @@
 
 	/* Create a device template */
 	memset(&dev0, 0, sizeof(dev0));
-	device_init_dev(&dev0.dev);
 	dev0.bus = bus;
 	dev0.sysdata = bus->sysdata;
 	dev0.dev.parent = &bus->iobus;
diff -urN linux-2.5.3-pre4/drivers/pcmcia/Config.help linux/drivers/pcmcia/Config.help
--- linux-2.5.3-pre4/drivers/pcmcia/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/pcmcia/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,53 @@
+CONFIG_PCMCIA
+  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+  computer.  These are credit-card size devices such as network cards,
+  modems or hard drives often used with laptops computers.  There are
+  actually two varieties of these cards: the older 16 bit PCMCIA cards
+  and the newer 32 bit CardBus cards.  If you want to use CardBus
+  cards, you need to say Y here and also to "CardBus support" below.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).  Please also read the PCMCIA-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  When compiled this way, there will be modules called pcmcia_core.o
+  and ds.o.  If you want to compile it as a module, say M here and
+  read <file:Documentation/modules.txt>.
+
+CONFIG_CARDBUS
+  CardBus is a bus mastering architecture for PC-cards, which allows
+  for 32 bit PC-cards (the original PCMCIA standard specifies only
+  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
+
+  This option enables support for CardBus PC Cards, as well as support
+  for CardBus host bridges.  Virtually all modern PCMCIA bridges are
+  CardBus compatible.  A "bridge" is the hardware inside your computer
+  that PCMCIA cards are plugged into.
+
+  To use your PC-cards, you will need supporting software from David
+  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+  for location).
+
+  If unsure, say Y.
+
+CONFIG_I82092
+  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
+  found in some older laptops and more commonly in evaluation boards for the
+  chip.
+
+CONFIG_I82365
+  Say Y here to include support for ISA-bus PCMCIA host bridges that
+  are register compatible with the Intel i82365.  These are found on
+  older laptops and ISA-bus card readers for desktop systems.  A
+  "bridge" is the hardware inside your computer that PCMCIA cards are
+  plugged into. If unsure, say N.
+
+CONFIG_TCIC
+  Say Y here to include support for the Databook TCIC family of PCMCIA
+  host bridges. These are only found on a handful of old systems.
+  "Bridge" is the name used for the hardware inside your computer that
+  PCMCIA cards are plugged into. If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/pnp/Config.help linux/drivers/pnp/Config.help
--- linux-2.5.3-pre4/drivers/pnp/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/pnp/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,29 @@
+CONFIG_PNP
+  Plug and Play (PnP) is a standard for peripherals which allows those
+  peripherals to be configured by software, e.g. assign IRQ's or other
+  parameters. No jumpers on the cards are needed, instead the values
+  are provided to the cards from the BIOS, from the operating system,
+  or using a user-space utility.
+
+  Say Y here if you would like Linux to configure your Plug and Play
+  devices. You should then also say Y to "ISA Plug and Play support",
+  below. Alternatively, you can say N here and configure your PnP
+  devices using the user space utilities contained in the isapnptools
+  package.
+
+  This support is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ISAPNP
+  Say Y here if you would like support for ISA Plug and Play devices.
+  Some information is in <file:Documentation/isapnp.txt>.
+
+  This support is also available as a module called isapnp.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+  If unsure, say Y.
+
diff -urN linux-2.5.3-pre4/drivers/s390/Config.help linux/drivers/s390/Config.help
--- linux-2.5.3-pre4/drivers/s390/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/s390/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,439 @@
+CONFIG_BLK_DEV_RAM
+  Saying Y here will allow you to use a portion of your RAM memory as
+  a block device, so that you can make file systems on it, read and
+  write to it and do all the other things that you can do with normal
+  block devices (such as hard drives). It is usually used to load and
+  store a copy of a minimal root file system off of a floppy into RAM
+  during the initial install of Linux.
+
+  Note that the kernel command line option "ramdisk=XX" is now
+  obsolete. For details, read <file:Documentation/ramdisk.txt>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M and read <file:Documentation/modules.txt>. The module will be
+  called rd.o.
+
+  Most normal users won't need the RAM disk functionality, and can
+  thus say N here.
+
+CONFIG_BLK_DEV_RAM_SIZE
+  The default value is 4096. Only change this if you know what are
+  you doing. If you are using IBM S/390, then set this to 8192.
+
+CONFIG_BLK_DEV_INITRD
+  The initial RAM disk is a RAM disk that is loaded by the boot loader
+  (loadlin or lilo) and that is mounted as root before the normal boot
+  procedure. It is typically used to load modules needed to mount the
+  "real" root file system, etc. See <file:Documentation/initrd.txt>
+  for details.
+
+CONFIG_BLK_DEV_LOOP
+  Saying Y here will allow you to use a regular file as a block
+  device; you can then create a file system on that block device and
+  mount it just as you would mount other block devices such as hard
+  drive partitions, CD-ROM drives or floppy drives. The loop devices
+  are block special device files with major number 7 and typically
+  called /dev/loop0, /dev/loop1 etc.
+
+  This is useful if you want to check an ISO 9660 file system before
+  burning the CD, or if you want to use floppy images without first
+  writing them to floppy. Furthermore, some Linux distributions avoid
+  the need for a dedicated Linux partition by keeping their complete
+  root file system inside a DOS FAT file using this loop device
+  driver.
+
+  The loop device driver can also be used to "hide" a file system in a
+  disk partition, floppy, or regular file, either using encryption
+  (scrambling the data) or steganography (hiding the data in the low
+  bits of, say, a sound file). This is also safe if the file resides
+  on a remote file server. If you want to do this, you will first have
+  to acquire and install a kernel patch from
+  <ftp://ftp.kerneli.org/pub/kerneli/>, and then you need to
+  say Y to this option.
+
+  Note that alternative ways to use encrypted file systems are
+  provided by the cfs package, which can be gotten from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>, and the newer tcfs
+  package, available at <http://tcfs.dia.unisa.it/>. You do not need
+  to say Y here if you want to use one of these. However, using cfs
+  requires saying Y to "NFS file system support" below while using
+  tcfs requires applying a kernel patch. An alternative steganography
+  solution is provided by StegFS, also available from
+  <ftp://ftp.kerneli.org/pub/kerneli/net-source/>.
+
+  To use the loop device, you need the losetup utility and a recent
+  version of the mount program, both contained in the util-linux
+  package. The location and current version number of util-linux is
+  contained in the file <file:Documentation/Changes>.
+
+  Note that this loop device has nothing to do with the loopback
+  device used for network connections from the machine to itself.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called loop.o.
+
+  Most users will answer N here.
+
+CONFIG_BLK_DEV_NBD
+  Saying Y here will allow your computer to be a client for network
+  block devices, i.e. it will be able to use block devices exported by
+  servers (mount file systems on them etc.). Communication between
+  client and server works over TCP/IP networking, but to the client
+  program this is hidden: it looks like a regular local file access to
+  a block device special file such as /dev/nd0.
+
+  Network block devices also allows you to run a block-device in
+  userland (making server and client physically the same computer,
+  communicating using the loopback network device).
+
+  Read <file:Documentation/nbd.txt> for more information, especially
+  about where to find the server code, which runs in user space and
+  does not need special kernel support.
+
+  Note that this has nothing to do with the network file systems NFS
+  or Coda; you can say N here even if you intend to use NFS or Coda.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called nbd.o.
+
+  If unsure, say N.
+
+CONFIG_HOTPLUG
+  Say Y here if you want to plug devices into your computer while
+  the system is running, and be able to use them quickly.  In many
+  cases, the devices can likewise be unplugged at any time too.
+
+  One well known example of this is PCMCIA- or PC-cards, credit-card
+  size devices such as network cards, modems or hard drives which are
+  plugged into slots found on all modern laptop computers.  Another
+  example, used on modern desktops as well as laptops, is USB.
+
+  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+  Then your kernel will automatically call out to a user mode "policy
+  agent" (/sbin/hotplug) to load modules and set up software needed
+  to use devices as you hotplug them.
+
+CONFIG_NETDEVICES
+  You can say N here if you don't intend to connect your Linux box to
+  any other computer at all or if all your connections will be over a
+  telephone line with a modem either via UUCP (UUCP is a protocol to
+  forward mail and news between unix hosts over telephone lines; read
+  the UUCP-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
+  account or a BBS, even using term (term is a program which gives you
+  almost full Internet connectivity if you have a regular dial up
+  shell account on some Internet connected Unix computer. Read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  You'll have to say Y if your computer contains a network card that
+  you want to use under Linux (make sure you know its name because you
+  will be asked for it and read the Ethernet-HOWTO (especially if you
+  plan to use more than one network card under Linux)) or if you want
+  to use SLIP (Serial Line Internet Protocol is the protocol used to
+  send Internet traffic over telephone lines or null modem cables) or
+  CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
+  and newer replacement for SLIP) or PLIP (Parallel Line Internet
+  Protocol is mainly used to create a mini network by connecting the
+  parallel ports of two local machines) or AX.25/KISS (protocol for
+  sending Internet traffic over amateur radio links).
+
+  Make sure to read the NET-3-HOWTO. Eventually, you will have to read
+  Olaf Kirch's excellent and free book "Network Administrator's
+  Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
+  unsure, say Y.
+
+CONFIG_DUMMY
+  This is essentially a bit-bucket device (i.e. traffic you send to
+  this device is consigned into oblivion) with a configurable IP
+  address. It is most commonly used in order to make your currently
+  inactive SLIP address seem like a real address for local programs.
+  If you use SLIP or PPP, you might want to say Y here. Since this
+  thing often comes in handy, the default is Y. It won't enlarge your
+  kernel either. What a deal. Read about it in the Network
+  Administrator's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called dummy.o.  If you want to use more than one dummy
+  device at a time, you need to compile this driver as a module.
+  Instead of 'dummy', the devices will then be called 'dummy0',
+  'dummy1' etc.
+
+CONFIG_BONDING
+  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+  Channels together. This is called 'Etherchannel' by Cisco,
+  'Trunking' by Sun, and 'Bonding' in Linux.
+
+  If you have two Ethernet connections to some other computer, you can
+  make them behave like one double speed connection using this driver.
+  Naturally, this has to be supported at the other end as well, either
+  with a similar Bonding Linux driver, a Cisco 5500 switch or a
+  SunTrunking SunSoft driver.
+
+  This is similar to the EQL driver, but it merges Ethernet segments
+  instead of serial lines.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called bonding.o.
+
+CONFIG_EQUALIZER
+  If you have two serial connections to some other computer (this
+  usually requires two modems and two telephone lines) and you use
+  SLIP (the protocol for sending Internet traffic over telephone
+  lines) or PPP (a better SLIP) on them, you can make them behave like
+  one double speed connection using this driver.  Naturally, this has
+  to be supported at the other end as well, either with a similar EQL
+  Linux driver or with a Livingston Portmaster 2e.
+
+  Say Y if you want this and read
+  <file:Documentation/networking/eql.txt>.  You may also want to read
+  section 6.2 of the NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eql.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_TUN
+  TUN/TAP provides packet reception and transmission for user space
+  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+  device, which instead of receiving packets from a physical media,
+  receives them from user space program and instead of sending packets
+  via physical media writes them to the user space program.
+
+  When a program opens /dev/net/tun, driver creates and registers
+  corresponding net device tunX or tapX.  After a program closed above
+  devices, driver will automatically delete tunXX or tapXX device and
+  all routes corresponding to it.
+
+  Please read <file:Documentation/networking/tuntap.txt> for more
+  information.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tun.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If you don't know what to use this for, you don't need it.
+
+CONFIG_NET_ETHERNET
+  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+  type of Local Area Network (LAN) in universities and companies.
+
+  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+  coaxial cable, linking computers in a chain), 10BASE-T or twisted
+  pair (10 Mbps over twisted pair cable, linking computers to central
+  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+  Ethernet (1 Gbps over optical fiber or short copper links).
+
+  If your Linux machine will be connected to an Ethernet and you have
+  an Ethernet network interface card (NIC) installed in your computer,
+  say Y here and read the Ethernet-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You will then also have
+  to say Y to the driver for your particular NIC.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about Ethernet network cards. If unsure, say N.
+
+CONFIG_TR
+  Token Ring is IBM's way of communication on a local network; the
+  rest of the world uses Ethernet. To participate on a Token Ring
+  network, you need a special Token ring network card. If you are
+  connected to such a Token Ring network and want to use your Token
+  Ring card under Linux, say Y here and to the driver for your
+  particular card below and read the Token-Ring mini-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>. Most people can
+  say N here.
+
+CONFIG_FDDI
+  Fiber Distributed Data Interface is a high speed local area network
+  design; essentially a replacement for high speed Ethernet. FDDI can
+  run over copper or fiber. If you are connected to such a network and
+  want a driver for the FDDI card in your computer, say Y here (and
+  then also Y to the driver for your FDDI card, below). Most people
+  will say N.
+
+CONFIG_UNIX98_PTYS
+  A pseudo terminal (PTY) is a software device consisting of two
+  halves: a master and a slave. The slave device behaves identical to
+  a physical terminal; the master device is used by a process to
+  read data from and write data to the slave, thereby emulating a
+  terminal. Typical programs for the master side are telnet servers
+  and xterms.
+
+  Linux has traditionally used the BSD-like names /dev/ptyxx for
+  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+  has a number of problems. The GNU C library glibc 2.1 and later,
+  however, supports the Unix98 naming standard: in order to acquire a
+  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+  terminal is then made available to the process and the pseudo
+  terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The entries in /dev/pts/ are created on the fly by a virtual
+  file system; therefore, if you say Y here you should say Y to
+  "/dev/pts file system for Unix98 PTYs" as well.
+
+  If you want to say Y here, you need to have the C library glibc 2.1
+  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+  Read the instructions in <file:Documentation/Changes> pertaining to
+  pseudo terminals. It's safe to say N.
+
+CONFIG_UNIX98_PTY_COUNT
+  The maximum number of Unix98 PTYs that can be used at any one time.
+  The default is 256, and should be enough for desktop systems. Server
+  machines which support incoming telnet/rlogin/ssh connections and/or
+  serve several X terminals may want to increase this: every incoming
+  connection and every xterm uses up one PTY.
+
+  When not in use, each additional set of 256 PTYs occupy
+  approximately 8 KB of kernel memory on 32-bit architectures.
+
+CONFIG_DASD
+  Enable this option if you want to access DASDs directly utilizing
+  S/390s channel subsystem commands. This is necessary for running
+  natively on a single image or an LPAR.
+
+CONFIG_DASD_ECKD
+  ECKD devices are the most commonly used devices. you should enable
+  this option unless you are very sure to have no ECKD device.
+
+CONFIG_DASD_CKD
+  CKD devices are currently unsupported.
+
+CONFIG_DASD_FBA
+  FBA devices are currently unsupported.
+
+CONFIG_TN3215
+  Include support for IBM 3215 line-mode terminals.
+
+CONFIG_TN3215_CONSOLE
+  Include support for using an IBM 3215 line-mode terminal as a
+  Linux system console.
+
+CONFIG_TN3270
+  Include support for IBM 3270 line-mode terminals.
+
+CONFIG_TN3270_CONSOLE
+  Include support for using an IBM 3270 line-mode terminal as a Linux
+  system console.  Available only if 3270 support is compiled in
+  statically.
+
+CONFIG_HWC
+  Include support for IBM HWC line-mode terminals.
+
+CONFIG_HWC_CONSOLE
+  Include support for using an IBM HWC line-mode terminal as the Linux
+  system console.
+
+CONFIG_S390_TAPE
+  Select this option if you want to access channel-attached tape
+  devices on IBM S/390 or zSeries.
+  If you select this option you will also want to select at
+  least one of the tape interface options and one of the tape
+  hardware options in order to access a tape device.
+  This option is also available as a module. The module will be
+  called tape390.o and include all selected interfaces and
+  hardware drivers.
+
+CONFIG_S390_TAPE_CHAR
+  Select this option if you want to access your channel-attached
+  tape devices using the character device interface.
+  This interface is similar to other Linux tape devices like
+  SCSI-Tapes (st) and the floppy tape device (ftape).
+  If unsure, say "Y".
+
+CONFIG_S390_TAPE_BLOCK
+  Select this option if you want to access your channel-attached tape
+  devices using the block device interface.  This interface is similar
+  to CD-ROM devices on other platforms.  The tapes can only be
+  accessed read-only when using this interface.  Have a look at
+  Documentation/s390/TAPE for further information about creating
+  volumes for and using this interface.  It is safe to say "Y" here.
+
+CONFIG_S390_TAPE_3490
+  Select this option if you want to access IBM 3480 magnetic
+  tape subsystems and 100% compatibles.
+  It is safe to say "Y" here.
+
+CONFIG_S390_TAPE_3480
+  Select this option if you want to access IBM 3490 magnetic
+  tape subsystems and 100% compatibles.
+
+CONFIG_CTC
+  Select this option if you want to use channel-to-channel networking
+  on IBM S/390 or zSeries. This device driver supports real CTC
+  coupling using ESCON. It also supports virtual CTCs when running
+  under VM. It will use the channel device configuration if this is
+  available.  This option is also available as a module which will be
+  called ctc.o.  If you do not know what it is, it's safe to say "Y".
+
+CONFIG_DASD_DIAG
+  Select this option if you want to use CMS reserved Disks under VM
+  with the Diagnose250 command.  If you are not running under VM or
+  unsure what it is, say "N".
+
+CONFIG_BLK_DEV_XPRAM
+  Select this option if you want to use your expanded storage on S/390
+  or zSeries as a disk.  This is useful as a _fast_ swap device if you
+  want to access more than 2G of memory when running in 31 bit mode.
+  This option is also available as a module which will be called
+  xpram.o.  If unsure, say "N".
+
+CONFIG_IUCV
+  Select this option if you want to use inter-user communication
+  vehicle networking under VM or VIF.  This option is also available
+  as a module which will be called iucv.o. If unsure, say "Y".
+
+CONFIG_CHANDEV
+  The channel device layer is a layer to provide a consistent
+  interface for configuration & default machine check (devices
+  appearing & disappearing) handling on Linux for s/390 & z/Series
+  channel devices.
+
+  s/390 & z/Series channel devices include among others
+
+  lcs (the most common ethernet/token ring/fddi standard on
+  zSeries)
+  ctc/escon hi speed like serial link standard on zSeries
+  claw used to talk to cisco routers.
+  qeth gigabit ethernet.
+
+  These devices use two channels one read & one write for
+  configuration & communication (& a third channel, the data
+  channel the case of gigabit ethernet). The motivation
+  behind developing this layer was that there was a lot of
+  duplicate code among the channel device drivers for
+  configuration.
+
+  Also the lcs & ctc drivers tended to fight over
+  3088/08's & 3088/1F's which could be either 2216/3172
+  channel attached lcs compatible devices or escon/ctc pipes
+  had to be configured separately as they couldn't autodetect,
+  this is now simplified by doing the configuration in a single
+  place (the channel device layer).
+
+  This layer isn't invasive & it is quite okay to use channel
+  drivers which don't use the channel device layer in
+  conjunction with drivers which do.
+
+  For more info see the chandev manpage usually distributed in
+  <file:Documentation/s390/chandev.8> in the Linux source tree.
+
diff -urN linux-2.5.3-pre4/drivers/sbus/audio/Config.help linux/drivers/sbus/audio/Config.help
--- linux-2.5.3-pre4/drivers/sbus/audio/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/sbus/audio/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,24 @@
+CONFIG_SPARCAUDIO
+  This driver provides support for the build-in sound devices on most
+  Sun machines. If you want to be able to use this, select this option
+  and one or more of the lowlevel drivers below. See
+  <http://www.dementia.org/~shadow/sparcaudio.html> for more
+  information.
+
+CONFIG_SPARCAUDIO_AMD7930
+  This driver supports the AMD 7930 chip found on sun4c, 4/6xx, and
+  SparcClassic systems.
+
+CONFIG_SPARCAUDIO_CS4231
+  This driver supports the Crystal Semiconductor CS4231 chip found on
+  the SS4, SS5, and Ultras.
+
+CONFIG_SPARCAUDIO_DBRI
+  This driver supports the DBRI audio interface found on the SS10,
+  SS20, Sparcbook 3, and Voyager systems.
+
+CONFIG_SPARCAUDIO_DUMMY
+  This is a pseudo-driver used for debugging and testing the
+  sparcaudio subsystem. Say N unless you want to work on this
+  subsystem.
+
diff -urN linux-2.5.3-pre4/drivers/sbus/char/Config.help linux/drivers/sbus/char/Config.help
--- linux-2.5.3-pre4/drivers/sbus/char/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/sbus/char/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,84 @@
+CONFIG_APM_RTC_IS_GMT
+  Say Y here if your RTC (Real Time Clock a.k.a. hardware clock)
+  stores the time in GMT (Greenwich Mean Time). Say N if your RTC
+  stores localtime.
+
+  It is in fact recommended to store GMT in your RTC, because then you
+  don't have to worry about daylight savings time changes. The only
+  reason not to use GMT in your RTC is if you also run a broken OS
+  that doesn't understand GMT.
+
+CONFIG_RTC
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock (or hardware clock) built
+  into your computer.
+
+  Every PC has such a clock built in. It can be used to generate
+  signals from as low as 1Hz up to 8192Hz, and can also be used
+  as a 24 hour alarm. It reports status information via the file
+  /proc/driver/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+  If you run Linux on a multiprocessor machine and said Y to
+  "Symmetric Multi Processing" above, you should say Y here to read
+  and set the RTC in an SMP compatible fashion.
+
+  If you think you have a use for such a device (such as periodic data
+  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+  for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called rtc.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SUN_OPENPROMIO
+  This driver provides user programs with an interface to the SPARC
+  PROM device tree. The driver implements a SunOS-compatible
+  interface and a NetBSD-compatible interface.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M and read <file:Documentation/modules.txt>. If unsure, say Y.
+
+CONFIG_SUN_MOSTEK_RTC
+  The Mostek RTC chip is used on all known Sun computers except
+  some JavaStations. For a JavaStation you need to say Y both here
+  and to "Enhanced Real Time Clock Support".
+
+  Say Y here unless you are building a special purpose kernel.
+
+CONFIG_OBP_FLASH
+  The OpenBoot PROM on Ultra systems is flashable. If you want to be
+  able to upgrade the OBP firmware, say Y here.
+
+CONFIG_SUN_JSFLASH
+  If you say Y here, you will be able to boot from your JavaStation's
+  Flash memory.
+
+CONFIG_SAB82532
+  This driver supports the serial ports on newer (PCI) Ultra systems.
+  Say Y if you want to be able to use your serial ports.
+
+CONFIG_SUN_VIDEOPIX
+  Say Y here to support the Videopix Frame Grabber from Sun
+  Microsystems, commonly found on SPARCstations.  This card, which is
+  based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and
+  SVIDEO signals.
+
+CONFIG_SUN_BPP
+  Say Y here to support Sun's obsolete variant of IEEE1284
+  bidirectional parallel port protocol as /dev/bppX.  Can be built on
+  x86 machines.
+
+CONFIG_SUN_AURORA
+  The Aurora Multiboard is a multi-port high-speed serial controller.
+  If you have one of these, say Y.
+
+CONFIG_TADPOLE_TS102_UCTRL
+  Say Y here to directly support the TS102 Microcontroller interface
+  on the Tadpole Sparcbook 3.  This device handles power-management
+  events, and can also notice the attachment/detachment of external
+  monitors and mice.
+
diff -urN linux-2.5.3-pre4/drivers/scsi/Config.help linux/drivers/scsi/Config.help
--- linux-2.5.3-pre4/drivers/scsi/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/scsi/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,1380 @@
+CONFIG_BLK_DEV_3W_XXXX_RAID
+  3ware is the only hardware ATA-Raid product in Linux to date.
+  This card is 2,4, or 8 channel master mode support only.
+  SCSI support required!!!
+
+  <http://www.3ware.com/>
+
+  Please read the comments at the top of
+  <file:drivers/scsi/3w-xxxx.c>.
+
+CONFIG_WARPENGINE_SCSI
+  Support for MacroSystem Development's WarpEngine Amiga SCSI-2
+  controller. Info at
+  <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>.
+
+CONFIG_JAZZ_ESP
+  This is the driver for the onboard SCSI host adapter of MIPS Magnum
+  4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
+  systems.
+
+CONFIG_BLK_DEV_SD
+  If you want to use a SCSI hard disk or the SCSI or parallel port
+  version of the IOMEGA ZIP drive under Linux, say Y and read the
+  SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. This is NOT for SCSI
+  CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sd_mod.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.  Do not compile this driver as a
+  module if your root file system (the one containing the directory /)
+  is located on a SCSI disk. In this case, do not compile the driver
+  for your SCSI host adapter (below) as a module either.
+
+CONFIG_SD_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted.  In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional disks that can be loaded after the
+  first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_CHR_DEV_ST
+  If you want to use a SCSI tape drive under Linux, say Y and read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and
+  <file:drivers/scsi/README.st> in the kernel source.  This is NOT for
+  SCSI CD-ROMs.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called st.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_CHR_DEV_OSST
+  The OnStream SC-x0 SCSI tape drives can not be driven by the
+  standard st driver, but instead need this special osst driver and
+  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
+  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
+  as well.  Note that there is also a second generation of OnStream
+  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
+  tapes (QIC-157) and can be driven by the standard driver st.
+  For more information, you may have a look at the SCSI-HOWTO
+  <http://www.linuxdoc.org/docs.html#howto>  and
+  <file:drivers/scsi/README.osst>  in the kernel source.
+  More info on the OnStream driver may be found on
+  <http://linux1.onstream.nl/test/>
+  Please also have a look at the standard st docu, as most of it
+  applies to osst as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called osst.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_BLK_DEV_SR
+  If you want to use a SCSI CD-ROM under Linux, say Y and read the
+  SCSI-HOWTO and the CD-ROM-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto>. Also make sure to say Y
+  or M to "ISO 9660 CD-ROM file system support" later.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called sr_mod.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>.
+
+CONFIG_SR_EXTRA_DEVS
+  This controls the amount of additional space allocated in tables for
+  drivers that are loaded as modules after the kernel is booted. In
+  the event that the SCSI core itself was loaded as a module, this
+  value is the number of additional CD-ROMs that can be loaded after
+  the first host driver is loaded.
+
+  Admittedly this isn't pretty, but there are tons of race conditions
+  involved with resizing the internal arrays on the fly.  Someday this
+  flag will go away, and everything will work automatically.
+
+  If you don't understand what's going on, go with the default.
+
+CONFIG_BLK_DEV_SR_VENDOR
+  This enables the usage of vendor specific SCSI commands. This is
+  required to support multisession CDs with old NEC/TOSHIBA cdrom
+  drives (and HP Writers). If you have such a drive and get the first
+  session only, try saying Y here; everybody else says N.
+
+CONFIG_CHR_DEV_SG
+  If you want to use SCSI scanners, synthesizers or CD-writers or just
+  about anything having "SCSI" in its name other than hard disks,
+  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
+  directly, so you need some additional software which knows how to
+  talk to these devices using the SCSI protocol:
+
+  For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
+  writer software look at Cdrtools
+  (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
+  and for burning a "disk at once": CDRDAO
+  (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
+  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
+  For other devices, it's possible that you'll have to write the
+  driver software yourself. Please read the file
+  <file:Documentation/scsi-generic.txt> for more information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt> and
+  <file:Documentation/scsi.txt>. The module will be called sg.o. If unsure,
+  say N.
+
+CONFIG_SCSI_MULTI_LUN
+  If you have a SCSI device that supports more than one LUN (Logical
+  Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
+  can say Y here to force the SCSI driver to probe for multiple LUNs.
+  A SCSI device with multiple LUNs acts logically like multiple SCSI
+  devices. The vast majority of SCSI devices have only one LUN, and
+  so most people can say N here and should in fact do so, because it
+  is safer.
+
+CONFIG_SCSI_CONSTANTS
+  The error messages regarding your SCSI hardware will be easier to
+  understand if you say Y here; it will enlarge your kernel by about
+  12 KB. If in doubt, say Y.
+
+CONFIG_SCSI_LOGGING
+  This turns on a logging facility that can be used to debug a number
+  of SCSI related problems.
+
+  If you say Y here, no logging output will appear by default, but you
+  can enable logging by saying Y to "/proc file system support" and
+  "Sysctl support" below and executing the command
+
+     echo "scsi log token [level]" > /proc/scsi/scsi
+
+  at boot time after the /proc file system has been mounted.
+
+  There are a number of things that can be used for 'token' (you can
+  find them in the source: <file:drivers/scsi/scsi.c>), and this
+  allows you to select the types of information you want, and the
+  level allows you to select the level of verbosity.
+
+  If you say N here, it may be harder to track down some types of SCSI
+  problems. If you say Y here your kernel will be somewhat larger, but
+  there should be no noticeable performance impact as long as you have
+  logging turned off.
+
+CONFIG_SCSI_DECNCR
+  Say Y here to support the NCR53C94 SCSI controller chips on IOASIC
+  based TURBOchannel DECstations and TURBOchannel PMAZ-A cards.
+
+CONFIG_SCSI_ADVANSYS
+  This is a driver for all SCSI host adapters manufactured by
+  AdvanSys. It is documented in the kernel source in
+  <file:drivers/scsi/advansys.c>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  advansys.o.
+
+CONFIG_SCSI_AHA152X
+  This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
+  SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
+  must be manually specified in this case.
+
+  It is explained in section 3.3 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You might also want to
+  read the file <file:drivers/scsi/README.aha152x>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aha152x.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_AHA1542
+  This is support for a SCSI host adapter.  It is explained in section
+  3.4 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that Trantor was
+  purchased by Adaptec, and some former Trantor products are being
+  sold under the Adaptec name.  If it doesn't work out of the box, you
+  may have to change some settings in <file:drivers/scsi/aha1542.h>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called aha1542.o.
+
+CONFIG_SCSI_AHA1740
+  This is support for a SCSI host adapter.  It is explained in section
+  3.5 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/aha1740.h>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called aha1740.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_DPT_I2O
+  This driver supports all of Adaptec's I2O based RAID controllers as 
+  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
+  driver by Deanna Bonds.  See <file:drivers/scsi/README.dpti>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  dpt_i2o.o.
+
+CONFIG_SCSI_AIC7XXX_OLD
+  WARNING This driver is an older aic7xxx driver and is no longer
+  under active development.  Adaptec, Inc. is writing a new driver to
+  take the place of this one, and it is recommended that whenever
+  possible, people should use the new Adaptec written driver instead
+  of this one.  This driver will eventually be phased out entirely.
+
+  This is support for the various aic7xxx based Adaptec SCSI
+  controllers. These include the 274x EISA cards; 284x VLB cards;
+  2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
+  motherboard based SCSI controllers from Adaptec. It does not support
+  the AAA-13x RAID controllers from Adaptec, nor will it likely ever
+  support them. It does not support the 2920 cards from Adaptec that
+  use the Future Domain SCSI controller chip. For those cards, you
+  need the "Future Domain 16xx SCSI support" driver.
+
+  In general, if the controller is based on an Adaptec SCSI controller
+  chip from the aic777x series or the aic78xx series, this driver
+  should work. The only exception is the 7810 which is specifically
+  not supported (that's the RAID controller chip on the AAA-13x
+  cards).
+
+  Note that the AHA2920 SCSI host adapter is *not* supported by this
+  driver; choose "Future Domain 16xx SCSI support" instead if you have
+  one of those.
+
+  Information on the configuration options for this controller can be
+  found by checking the help file for each of the available
+  configuration options. You should read
+  <file:drivers/scsi/aic7xxx_old/README.aic7xxx> at a minimum before
+  contacting the maintainer with any questions.  The SCSI-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>, can also
+  be of great help.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called aic7xxx_old.o.
+
+CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT
+  This option causes the aic7xxx driver to attempt to use Tagged
+  Command Queueing (TCQ) on all devices that claim to support it.
+
+  TCQ is a feature of SCSI-2 which improves performance: the host
+  adapter can send several SCSI commands to a device's queue even if
+  previous commands haven't finished yet.  Because the device is
+  intelligent, it can optimize its operations (like head positioning)
+  based on its own request queue.  Not all devices implement this
+  correctly.
+
+  If you say Y here, you can still turn off TCQ on troublesome devices
+  with the use of the tag_info boot parameter.  See the file
+  <file:drivers/scsi/README.aic7xxx> for more information on that and
+  other aic7xxx setup commands.  If this option is turned off, you may
+  still enable TCQ on known good devices by use of the tag_info boot
+  parameter.
+
+  If you are unsure about your devices then it is safest to say N
+  here.
+
+  However, TCQ can increase performance on some hard drives by as much
+  as 50% or more, so it is recommended that if you say N here, you
+  should at least read the <file:drivers/scsi/README.aic7xxx> file so
+  you will know how to enable this option manually should your drives
+  prove to be safe in regards to TCQ.
+
+  Conversely, certain drives are known to lock up or cause bus resets
+  when TCQ is enabled on them.  If you have a Western Digital
+  Enterprise SCSI drive for instance, then don't even bother to enable
+  TCQ on it as the drive will become unreliable, and it will actually
+  reduce performance.
+
+CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE
+  Specify the number of commands you would like to allocate per SCSI
+  device when Tagged Command Queueing (TCQ) is enabled on that device.
+
+  Reasonable figures are in the range of 8 to 24 commands per device,
+  but depending on hardware could be increased or decreased from that
+  figure. If the number is too high for any particular device, the
+  driver will automatically compensate usually after only 10 minutes
+  of uptime. It will not hinder performance if some of your devices
+  eventually have their command depth reduced, but is a waste of
+  memory if all of your devices end up reducing this number down to a
+  more reasonable figure.
+
+  NOTE: Certain very broken drives are known to lock up when given
+  more commands than they like to deal with. Quantum Fireball drives
+  are the most common in this category. For the Quantum Fireball
+  drives it is suggested to use no more than 8 commands per device.
+
+  Default: 8
+
+CONFIG_AIC7XXX_OLD_PROC_STATS
+  This option tells the driver to keep track of how many commands have
+  been sent to each particular device and report that information to
+  the user via the /proc/scsi/aic7xxx/n file, where n is the number of
+  the aic7xxx controller you want the information on. This adds a
+  small amount of overhead to each and every SCSI command the aic7xxx
+  driver handles, so if you aren't really interested in this
+  information, it is best to leave it disabled. This will only work if
+  you also say Y to "/proc file system support", below.
+
+  If unsure, say N.
+
+CONFIG_SCSI_IPS
+  This is support for the IBM ServeRAID hardware RAID controllers.
+  See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
+  for more information.  If this driver does not work correctly
+  without modification please contact the author by email at
+  ipslinux@us.ibm.com.
+
+  You can build this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  but only a single instance may be loaded. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  The module will be called ips.o.
+
+CONFIG_SCSI_BUSLOGIC
+  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
+  Adapters. Consult the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and the files
+  <file:drivers/scsi/README.BusLogic> and
+  <file:drivers/scsi/README.FlashPoint> for more information. If this
+  driver does not work correctly without modification, please contact
+  the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
+
+  You can also build this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  but only a single instance may be loaded. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+  The module will be called BusLogic.o.
+
+CONFIG_SCSI_OMIT_FLASHPOINT
+  This option allows you to omit the FlashPoint support from the
+  BusLogic SCSI driver. The FlashPoint SCCB Manager code is
+  substantial, so users of MultiMaster Host Adapters may wish to omit
+  it.
+
+CONFIG_SCSI_CPQFCTS
+  Say Y here to compile in support for the Compaq StorageWorks Fibre
+  Channel 64-bit/66Mhz Host Bus Adapter.
+
+CONFIG_SCSI_DMX3191D
+  This is support for Domex DMX3191D SCSI Host Adapters.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dmx3191d.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_DTC3280
+  This is support for DTC 3180/3280 SCSI Host Adapters.  Please read
+  the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, and the file
+  <file:drivers/scsi/README.dtc3x80>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dtc.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_EATA_DMA
+  This is support for the EATA-DMA protocol compliant SCSI Host
+  Adapters like the SmartCache III/IV, SmartRAID controller families
+  and the DPT PM2011B and PM2012B controllers.
+
+  Note that this driver is obsolete; if you have one of the above
+  SCSI Host Adapters, you should normally say N here and Y to "EATA
+  ISA/EISA/PCI support", below.  Please read the SCSI-HOWTO, available
+  from <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called eata_dma.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_EATA_PIO
+  This driver supports all EATA-PIO protocol compliant SCSI Host
+  Adapters like the DPT PM2001 and the PM2012A.  EATA-DMA compliant
+  host adapters could also use this driver but are discouraged from
+  doing so, since this driver only supports hard disks and lacks
+  numerous features.  You might want to have a look at the SCSI-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called eata_pio.o.
+
+CONFIG_SCSI_U14_34F
+  This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
+  The source at <file:drivers/scsi/u14-34f.c> contains some
+  information about this hardware.  If the driver doesn't work out of
+  the box, you may have to change some settings in
+  <file: drivers/scsi/u14-34f.c>.  Read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  Note that there is also
+  another driver for the same hardware: "UltraStor SCSI support",
+  below.  You should say Y to both only if you want 24F support as
+  well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called u14-34f.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_U14_34F_LINKED_COMMANDS
+  This option enables elevator sorting for all probed SCSI disks and
+  CD-ROMs. It definitely reduces the average seek distance when doing
+  random seeks, but this does not necessarily result in a noticeable
+  performance improvement: your mileage may vary...
+
+  The safe answer is N.
+
+CONFIG_SCSI_U14_34F_MAX_TAGS
+  This specifies how many SCSI commands can be maximally queued for
+  each probed SCSI device. You should reduce the default value of 8
+  only if you have disks with buggy or limited tagged command support.
+  Minimum is 2 and maximum is 14. This value is also the window size
+  used by the elevator sorting option above. The effective value used
+  by the driver for each probed SCSI device is reported at boot time.
+
+CONFIG_SCSI_FUTURE_DOMAIN
+  This is support for Future Domain's 16-bit SCSI host adapters
+  (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
+  other adapters based on the Future Domain chipsets (Quantum
+  ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
+  It is explained in section 3.7 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
+  and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
+  controller support"). This Future Domain driver works with the older
+  Adaptec AHA-2920A boards with a Future Domain chip on them.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called fdomain.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_FD_MCS
+  This is support for Future Domain MCS 600/700 MCA SCSI adapters.
+  Some PS/2 computers are equipped with IBM Fast SCSI Adapter/A which
+  is identical to the MCS 700 and hence also supported by this driver.
+  This driver also supports the Reply SB16/SCSI card (the SCSI part).
+  It supports multiple adapters in the same system.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called fd_mcs.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_GENERIC_NCR5380
+  This is the generic NCR family of SCSI controllers, not to be
+  confused with the NCR 53c7 or 8xx controllers.  It is explained in
+  section 3.8 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/g_NCR5380.h>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called g_NCR5380.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_GENERIC_NCR53C400
+  This enables certain optimizations for the NCR53c400 SCSI cards.
+  You might as well try it out.  Note that this driver will only probe
+  for the Trantor T130B in its default configuration; you might have
+  to pass a command line option to the kernel at boot time if it does
+  not detect your card.  See the file
+  <file:drivers/scsi/README.g_NCR5380> for details.
+
+CONFIG_SCSI_G_NCR5380_PORT
+  The NCR5380 and NCR53c400 SCSI controllers come in two varieties:
+  port or memory mapped. You should know what you have. The most
+  common card, Trantor T130B, uses port mapped mode.
+
+CONFIG_SCSI_NCR_D700
+  This is a driver for the MicroChannel Dual 700 card produced by
+  NCR and commonly used in 345x/35xx/4100 class machines.  It always
+  tries to negotiate sync and uses tag command queueing.
+
+  Unless you have an NCR manufactured machine, the chances are that
+  you do not have this SCSI card, so say N.
+
+CONFIG_SCSI_LASI700
+  This is a driver for the lasi baseboard in some parisc machines
+  which is based on the 53c700 chip.  Will also support LASI subsystems
+  based on the 710 chip using 700 emulation mode.
+
+  Unless you know you have a 53c700 or 53c710 based lasi, say N here
+
+CONFIG_SCSI_NCR53C7xx
+  This is a driver for the 53c7 and 8xx NCR family of SCSI
+  controllers, not to be confused with the NCR 5380 controllers.  It
+  is explained in section 3.8 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/53c7,8xx.h>.  Please read
+  <file:drivers/scsi/README.ncr53c7xx> for the available boot time
+  command line options.
+
+  Note: there is another driver for the 53c8xx family of controllers
+  ("NCR53C8XX SCSI support" below).  If you want to use them both, you
+  need to say M to both and build them as modules, but only one may be
+  active at a time. If you have a 53c8xx board, it's better to use the
+  other driver.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called 53c7,8xx.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_NCR53C7xx_sync
+  In general, this is good; however, it is a bit dangerous since there
+  are some broken SCSI devices out there. Take your chances. Safe bet
+  is N.
+
+CONFIG_SCSI_NCR53C7xx_FAST
+  This will enable 10MHz FAST-SCSI transfers with your host
+  adapter. Some systems have problems with that speed, so it's safest
+  to say N here.
+
+CONFIG_SCSI_NCR53C7xx_DISCONNECT
+  This enables the disconnect/reconnect feature of the NCR SCSI
+  controller. When you say Y here, a slow SCSI device will not lock
+  the SCSI bus while processing a request, allowing simultaneous use
+  of e.g. a SCSI hard disk and SCSI tape or CD-ROM drive, and
+  providing much better performance when using slow and fast SCSI
+  devices at the same time. Some devices, however, do not operate
+  properly with this option enabled, and will cause your SCSI system
+  to hang, which might cause a system crash. The safe answer
+  therefore is to say N.
+
+CONFIG_SCSI_SYM53C8XX_2
+  This driver supports the whole NCR53C8XX/SYM53C8XX family of 
+  PCI-SCSI controllers. It also supports the subset of LSI53C10XX 
+  Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 
+  language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 
+  controllers.
+
+  If your system has problems using this new major version of the
+  SYM53C8XX driver, you may switch back to driver version 1.
+
+  Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
+  information.
+
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
+  This option only applies to PCI-SCSI chip that are PCI DAC capable 
+  (875A, 895A, 896, 1010-33, 1010-66, 1000).
+
+  When set to 0, only PCI 32 bit DMA addressing (SAC) will be performed.
+  When set to 1, 40 bit DMA addressing (with upper 24 bits of address 
+  set to zero) is supported. The addressable range is here 1 TB.
+  When set to 2, full 64 bits of address for DMA are supported, but only
+  16 segments of 4 GB can be addressed. The addressable range is so 
+  limited to 64 GB.
+
+  The safest value is 0 (32 bit DMA addressing) that is guessed to still 
+  fit most of real machines.
+
+  The preferred value 1 (40 bit DMA addressing) should make happy 
+  properly engineered PCI DAC capable host bridges. You may configure
+  this option for Intel platforms with more than 4 GB of memory.
+
+  The still experimental value 2 (64 bit DMA addressing with 16 x 4GB 
+  segments limitation) can be used on systems that require PCI address 
+  bits past bit 39 to be set for the addressing of memory using PCI 
+  DAC cycles.
+
+CONFIG_SCSI_SYM53C8XX_IOMAPPED
+  If you say Y here, the driver will preferently use normal IO rather than 
+  memory mapped IO.
+
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS
+  This option allows you to specify the maximum number of commands
+  that can be queued to any device, when tagged command queuing is
+  possible. The driver supports up to 256 queued commands per device.
+  This value is used as a compiled-in hard limit.
+
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
+  This is the default value of the command queue depth the driver will 
+  announce to the generic SCSI layer for devices that support tagged 
+  command queueing. This value can be changed from the boot command line.
+  This is a soft limit that cannot exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
+
+CONFIG_SCSI_NCR53C8XX
+  This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
+  of PCI-SCSI controllers.  This driver supports parity checking,
+  tagged command queuing and fast synchronous data transfers up to 80
+  MB/s with wide FAST-40 LVD devices and controllers.
+
+  Recent versions of the 53C8XX chips are better supported by the
+  option "SYM53C8XX SCSI support", below.
+
+  Note: there is yet another driver for the 53c8xx family of
+  controllers ("NCR53c7,8xx SCSI support" above).  If you want to use
+  them both, you need to say M to both and build them as modules, but
+  only one may be active at a time.  If you have a 53c8xx board, you
+  probably do not want to use the "NCR53c7,8xx SCSI support".
+
+  Please read <file:drivers/scsi/README.ncr53c8xx> for more
+  information.
+
+CONFIG_SCSI_SYM53C8XX
+  This driver supports all the features of recent 53C8XX chips (used
+  in PCI SCSI controllers), notably the hardware phase mismatch
+  feature of the SYM53C896.
+
+  Older versions of the 53C8XX chips are not supported by this
+  driver.  If your system uses either a 810 rev. < 16, a 815, or a 825
+  rev. < 16 PCI SCSI processor, you must use the generic NCR53C8XX
+  driver ("NCR53C8XX SCSI support" above) or configure both the
+  NCR53C8XX and this SYM53C8XX drivers either as module or linked to
+  the kernel image.
+
+  When both drivers are linked into the kernel, the SYM53C8XX driver
+  is called first at initialization and you can use the 'excl=ioaddr'
+  driver boot option to exclude attachment of adapters by the
+  SYM53C8XX driver.  For example, entering
+  'sym53c8xx=excl:0xb400,excl=0xc000' at the lilo prompt prevents
+  adapters at io address 0xb400 and 0xc000 from being attached by the
+  SYM53C8XX driver, thus allowing the NCR53C8XX driver to attach them.
+  The 'excl' option is also supported by the NCR53C8XX driver.
+
+  Please read <file:drivers/scsi/README.ncr53c8xx> for more
+  information.
+
+CONFIG_SCSI_NCR53C8XX_SYNC
+  The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
+  rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80.  The numbers
+  are respectively the maximum data transfer rates in mega-transfers
+  per second for each class.  For example, a FAST-20 Wide 16 device is
+  able to transfer data at 20 million 16 bit packets per second for a
+  total rate of 40 MB/s.
+
+  You may specify 0 if you want to only use asynchronous data
+  transfers. This is the safest and slowest option. Otherwise, specify
+  a value between 5 and 80, depending on the capability of your SCSI
+  controller.  The higher the number, the faster the data transfer.
+  Note that 80 should normally be ok since the driver decreases the
+  value automatically according to the controller's capabilities.
+
+  Your answer to this question is ignored for controllers with NVRAM,
+  since the driver will get this information from the user set-up.  It
+  also can be overridden using a boot setup option, as follows
+  (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
+  for FAST-20 synchronous data transfer (20 mega-transfers per
+  second).
+
+  The normal answer therefore is not to go with the default but to
+  select the maximum value 80 allowing the driver to use the maximum
+  value supported by each controller. If this causes problems with
+  your SCSI devices, you should come back and decrease the value.
+
+  There is no safe option other than using good cabling, right
+  terminations and SCSI conformant devices.
+
+CONFIG_SCSI_NCR53C8XX_IOMAPPED
+  If you say Y here, the driver will use normal IO, as opposed to
+  memory mapped IO. Memory mapped IO has less latency than normal IO
+  and works for most Intel-based hardware. Under Linux/Alpha only
+  normal IO is currently supported by the driver and so, this option
+  has no effect on those systems.
+
+  The normal answer therefore is N; try Y only if you encounter SCSI
+  related problems.
+
+CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+  This option is only provided for safety if you suspect some SCSI
+  device of yours to not support properly the target-disconnect
+  feature. In that case, you would say Y here. In general however, to
+  not allow targets to disconnect is not reasonable if there is more
+  than 1 device on a SCSI bus. The normal answer therefore is N.
+
+CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+  "Tagged command queuing" is a feature of SCSI-2 which improves
+  performance: the host adapter can send several SCSI commands to a
+  device's queue even if previous commands haven't finished yet.
+  Because the device is intelligent, it can optimize its operations
+  (like head positioning) based on its own request queue. Some SCSI
+  devices don't implement this properly; if you want to disable this
+  feature, enter 0 or 1 here (it doesn't matter which).
+
+  The default value is 8 and should be supported by most hard disks.
+  This value can be overridden from the boot command line using the
+  'tags' option as follows (example):
+  'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
+  4, set queue depth to 16 for target 2 and target 3 on controller 0
+  and set queue depth to 10 for target 0 / lun 2 on controller 1.
+
+  The normal answer therefore is to go with the default 8 and to use
+  a boot command line option for devices that need to use a different
+  command queue depth.
+
+  There is no safe option other than using good SCSI devices.
+
+CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+  This option allows you to specify the maximum number of commands
+  that can be queued to any device, when tagged command queuing is
+  possible. The default value is 32. Minimum is 2, maximum is 64.
+  Modern hard disks are able to support 64 tags and even more, but
+  do not seem to be faster when more than 32 tags are being used.
+
+  So, the normal answer here is to go with the default value 32 unless
+  you are using very large hard disks with large cache (>= 1 MB) that
+  are able to take advantage of more than 32 tagged commands.
+
+  There is no safe option and the default answer is recommended.
+
+CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT
+  This option allows you to enable some features depending on GPIO
+  wiring. These General Purpose Input/Output pins can be used for
+  vendor specific features or implementation of the standard SYMBIOS
+  features. Genuine SYMBIOS controllers use GPIO0 in output for
+  controller LED and GPIO3 bit as a flag indicating
+  singled-ended/differential interface. The Tekram DC-390U/F boards
+  uses a different GPIO wiring.
+
+  Your answer to this question is ignored if all your controllers have
+  NVRAM, since the driver is able to detect the board type from the
+  NVRAM format.
+
+  If all the controllers in your system are genuine SYMBIOS boards or
+  use BIOS and drivers from SYMBIOS, you would want to say Y here,
+  otherwise N. N is the safe answer.
+
+CONFIG_SCSI_NCR53C8XX_PROFILE
+  This option allows you to enable profiling information gathering.
+  These statistics are not very accurate due to the low frequency
+  of the kernel clock (100 Hz on i386) and have performance impact
+  on systems that use very fast devices.
+
+  The normal answer therefore is N.
+
+CONFIG_SCSI_NCR53C8XX_PQS_PDS
+  Say Y here if you have a special SCSI adapter produced by NCR
+  corporation called a PCI Quad SCSI or PCI Dual SCSI. You do not need
+  this if you do not have one of these adapters. However, since this
+  device is detected as a specific PCI device, this option is quite
+  safe.
+
+  The common answer here is N, but answering Y is safe.
+
+CONFIG_SCSI_IBMMCA
+  This is support for the IBM SCSI adapter found in many of the PS/2
+  series computers.  These machines have an MCA bus, so you need to
+  answer Y to "MCA support" as well and read
+  <file:Documentation/mca.txt>.
+
+  If the adapter isn't found during boot (a common problem for models
+  56, 57, 76, and 77) you'll need to use the 'ibmmcascsi=<pun>' kernel
+  option, where <pun> is the id of the SCSI subsystem (usually 7, but
+  if that doesn't work check your reference diskette).  Owners of
+  model 95 with a LED-matrix-display can in addition activate some
+  activity info like under OS/2, but more informative, by setting
+  'ibmmcascsi=display' as an additional kernel parameter.  Try "man
+  bootparam" or see the documentation of your boot loader about how to
+  pass options to the kernel.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ibmmca.o.
+
+CONFIG_IBMMCA_SCSI_ORDER_STANDARD
+  In the PC-world and in most modern SCSI-BIOS-setups, SCSI-hard disks
+  are assigned to the drive letters, starting with the lowest SCSI-id
+  (physical number -- pun) to be drive C:, as seen from DOS and
+  similar operating systems. When looking into papers describing the
+  ANSI-SCSI-standard, this assignment of drives appears to be wrong.
+  The SCSI-standard follows a hardware-hierarchy which says that id 7
+  has the highest priority and id 0 the lowest. Therefore, the host
+  adapters are still today everywhere placed as SCSI-id 7 by default.
+  In the SCSI-standard, the drive letters express the priority of the
+  disk. C: should be the hard disk, or a partition on it, with the
+  highest priority. This must therefore be the disk with the highest
+  SCSI-id (e.g. 6) and not the one with the lowest! IBM-BIOS kept the
+  original definition of the SCSI-standard as also industrial- and
+  process-control-machines, like VME-CPUs running under realtime-OSes
+  (e.g. LynxOS, OS9) do.
+
+  If you like to run Linux on your MCA-machine with the same
+  assignment of hard disks as seen from e.g. DOS or OS/2 on your
+  machine, which is in addition conformant to the SCSI-standard, you
+  must say Y here. This is also necessary for MCA-Linux users who want
+  to keep downward compatibility to older releases of the
+  IBM-MCA-SCSI-driver (older than driver-release 2.00 and older than
+  June 1997).
+
+  If you like to have the lowest SCSI-id assigned as drive C:, as
+  modern SCSI-BIOSes do, which does not conform to the standard, but
+  is widespread and common in the PC-world of today, you must say N
+  here. If unsure, say Y.
+
+CONFIG_IBMMCA_SCSI_DEV_RESET
+  By default, SCSI-devices are reset when the machine is powered on.
+  However, some devices exist, like special-control-devices,
+  SCSI-CNC-machines, SCSI-printer or scanners of older type, that do
+  not reset when switched on. If you say Y here, each device connected
+  to your SCSI-bus will be issued a reset-command after it has been
+  probed, while the kernel is booting. This may cause problems with
+  more modern devices, like hard disks, which do not appreciate these
+  reset commands, and can cause your system to hang. So say Y only if
+  you know that one of your older devices needs it; N is the safe
+  answer.
+
+CONFIG_SCSI_MCA_53C9X
+  Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
+  controller based on the NCR 53C94.  This driver will allow use of
+  the controller on the 3550, and very possibly others.
+
+  If you want to compile this as a module (= code which can be
+  inserted and removed from the running kernel whenever you want), say
+  M here and read <file:Documentation/modules.txt>.  The module will
+  be called mca_53c9x.o.
+
+CONFIG_SCSI_IN2000
+  This is support for an ISA bus SCSI host adapter.  You'll find more
+  information in <file:drivers/scsi/README.in2000>. If it doesn't work
+  out of the box, you may have to change the jumpers for IRQ or
+  address selection.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called in2000.o.
+
+CONFIG_SCSI_INITIO
+  This is support for the Initio 91XXU(W) SCSI host adapter.  Please
+  read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called initio.o.
+
+CONFIG_SCSI_PAS16
+  This is support for a SCSI host adapter.  It is explained in section
+  3.10 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/pas16.h>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pas16.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_INIA100
+  This is support for the Initio INI-A100U2W SCSI host adapter.
+  Please read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called a100u2w.o.
+
+CONFIG_SCSI_PCI2000
+  This is support for the PCI2000I EIDE interface card which acts as a
+  SCSI host adapter.  Please read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module called pci2000.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_PCI2220I
+  This is support for the PCI2220i EIDE interface card which acts as a
+  SCSI host adapter.  Please read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module called pci2220i.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_PSI240I
+  This is support for the PSI240i EIDE interface card which acts as a
+  SCSI host adapter.  Please read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module called psi240i.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGIC_FAS
+  This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
+  FastSCSI! cards as well as any other card based on the FASXX chip
+  (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
+
+  This driver does NOT support the PCI versions of these cards. The
+  PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
+  SCSI support"), below.
+
+  Information about this driver is contained in
+  <file:drivers/scsi/README.qlogicfas>.  You should also read the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qlogicfas.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGIC_ISP
+  This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
+  IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
+  card is supported by the "AM53/79C974 PCI SCSI" driver.)
+
+  If you say Y here, make sure to choose "BIOS" at the question "PCI
+  access mode".
+
+  Please read the file <file:drivers/scsi/README.qlogicisp>.  You
+  should also read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qlogicisp.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGIC_FC
+  This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qlogicfc.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_QLOGIC_1280
+  Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called qla1280.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_SEAGATE
+  These are 8-bit SCSI controllers; the ST-01 is also supported by
+  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.  If it
+  doesn't work out of the box, you may have to change some settings in
+  <file:drivers/scsi/seagate.h>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called seagate.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_T128
+  This is support for a SCSI host adapter. It is explained in section
+  3.11 of the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/t128.h>.  Note that Trantor was purchased by
+  Adaptec, and some former Trantor products are being sold under the
+  Adaptec name.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called t128.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_ULTRASTOR
+  This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
+  adapter family.  This driver is explained in section 3.12 of the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If it doesn't work out
+  of the box, you may have to change some settings in
+  <file:drivers/scsi/ultrastor.h>.
+
+  Note that there is also another driver for the same hardware:
+  "UltraStor 14F/34F support", above.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ultrastor.o.
+
+CONFIG_SCSI_7000FASST
+  This driver supports the Western Digital 7000 SCSI host adapter
+  family.  Some information is in the source:
+  <file:drivers/scsi/wd7000.c>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wd7000.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_ACARD
+  This driver supports the ACARD 870U/W SCSI host adapter.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called atp870u.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_EATA
+  This driver supports all EATA/DMA-compliant SCSI host adapters.  DPT
+  ISA and all EISA I/O addresses are probed looking for the "EATA"
+  signature.  If you chose "BIOS" at the question "PCI access mode",
+  the addresses of all the PCI SCSI controllers reported by the PCI
+  subsystem are probed as well.
+
+  You want to read the start of <file:drivers/scsi/eata.c> and the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that there is also another driver for the same hardware
+  available: "EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti,
+  Alphatronix) support". You should say Y to only one of them.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called eata.o.
+
+CONFIG_SCSI_EATA_TAGGED_QUEUE
+  This is a feature of SCSI-2 which improves performance: the host
+  adapter can send several SCSI commands to a device's queue even if
+  previous commands haven't finished yet. Most EATA adapters negotiate
+  this feature automatically with the device, even if your answer is
+  N. The safe answer is N.
+
+CONFIG_SCSI_EATA_LINKED_COMMANDS
+  This option enables elevator sorting for all probed SCSI disks and
+  CD-ROMs. It definitely reduces the average seek distance when doing
+  random seeks, but this does not necessarily result in a noticeable
+  performance improvement: your mileage may vary...
+  The safe answer is N.
+
+CONFIG_SCSI_EATA_MAX_TAGS
+  This specifies how many SCSI commands can be maximally queued for
+  each probed SCSI device. You should reduce the default value of 16
+  only if you have disks with buggy or limited tagged command support.
+  Minimum is 2 and maximum is 62. This value is also the window size
+  used by the elevator sorting option above. The effective value used
+  by the driver for each probed SCSI device is reported at boot time.
+
+CONFIG_SCSI_NCR53C406A
+  This is support for the NCR53c406a SCSI host adapter.  For user
+  configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
+  in the kernel source.  Also read the SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called NCR53c406.o.
+
+CONFIG_SCSI_SYM53C416
+  This is support for the sym53c416 SCSI host adapter, the SCSI
+  adapter that comes with some HP scanners. This driver requires that
+  the sym53c416 is configured first using some sort of PnP
+  configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
+  are using isapnp then you need to compile this driver as a module
+  and then load it using insmod after isapnp has run. The parameters
+  of the configured card(s) should be passed to the driver. The format
+  is:
+
+    insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
+
+  There is support for up to four adapters. If you want to compile
+  this driver as a module ( = code which can be inserted in and
+  removed from the running kernel whenever you want), say M here and
+  read <file:Documentation/modules.txt>. The module will be called
+  sym53c416.o.
+
+CONFIG_SCSI_SIM710
+  This is a simple driver for NCR53c710 based SCSI host adapters.
+
+  More complex drivers for this chip are available ("NCR53c7,8xx SCSI
+  support", above), but they require that the scsi chip be able to do
+  DMA block moves between memory and on-chip registers, which can
+  cause problems under certain conditions.  This driver is designed to
+  avoid these problems and is intended to work with any Intel machines
+  using 53c710 chips, including various Compaq and NCR machines.
+
+  Please read the comments at the top of the file
+  <file:drivers/scsi/sim710.c> for more information.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called sim710.o.
+
+CONFIG_SCSI_DC390T
+  This driver supports PCI SCSI host adapters based on the Am53C974A
+  chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
+  PCscsi/PCnet (Am53/79C974) solutions.
+
+  Documentation can be found in <file:drivers/scsi/README.tmscsim>.
+
+  Note that this driver does NOT support Tekram DC390W/U/F, which are
+  based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
+  Also note that there is another generic Am53C974 driver,
+  "AM53/79C974 PCI SCSI support" below.  You can pick either one.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called tmscsim.o.
+
+CONFIG_SCSI_DC390T_NOGENSUPP
+  If you say N here, the DC390(T) SCSI driver relies on the DC390
+  EEPROM to get initial values for its settings, such as speed,
+  termination, etc.  If it can't find this EEPROM, it will use
+  defaults or the user supplied boot/module parameters.  For details
+  on driver configuration see <file:drivers/scsi/README.tmscsim>.
+
+  If you say Y here and if no EEPROM is found, the driver gives up and
+  thus only supports Tekram DC390(T) adapters.  This can be useful if
+  you have a DC390(T) and another Am53C974 based adapter, which, for
+  some reason, you want to drive with the other AM53C974 driver.
+
+  If unsure, say N.
+
+CONFIG_SCSI_AM53C974
+  This is support for the AM53/79C974 SCSI host adapters.  Please read
+  <file:drivers/scsi/README.AM53C974> for details.  Also, the
+  SCSI-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, is for you.
+
+  Note that there is another driver for AM53C974 based adapters:
+  "Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support", above.  You
+  can pick either one.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called AM53C974.o.
+
+CONFIG_SCSI_MEGARAID
+  This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
+  and 467 SCSI host adapters.
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called megaraid.o.
+
+CONFIG_SCSI_GDTH
+  Formerly called GDT SCSI Disk Array Controller Support.
+ 
+  This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 
+  manufactured by Intel/ICP vortex (an Intel Company). It is documented
+  in the kernel source in <file:drivers/scsi/gdth.c> and
+  <file:drivers/scsi/gdth.h.>
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_PPA
+  This driver supports older versions of IOMEGA's parallel port ZIP
+  drive (a 100 MB removable media device).
+
+  Note that you can say N here if you have the SCSI version of the ZIP
+  drive: it will be supported automatically if you said Y to the
+  generic "SCSI disk support", above.
+
+  If you have the ZIP Plus drive or a more recent parallel port ZIP
+  drive (if the supplied cable with the drive is labeled "AutoDetect")
+  then you should say N here and Y to "IOMEGA parallel port (imm -
+  newer drives)", below.
+
+  For more information about this driver and how to use it you should
+  read the file <file:drivers/scsi/README.ppa>.  You should also read
+  the SCSI-HOWTO, which is available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If you use this driver,
+  you will still be able to use the parallel port for other tasks,
+  such as a printer; it is safe to compile both drivers into the
+  kernel.
+
+  This driver is also available as a module which can be inserted in
+  and removed from the running kernel whenever you want.  To compile
+  this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called ppa.o.
+
+CONFIG_SCSI_IMM
+  This driver supports newer versions of IOMEGA's parallel port ZIP
+  drive (a 100 MB removable media device).
+
+  Note that you can say N here if you have the SCSI version of the ZIP
+  drive: it will be supported automatically if you said Y to the
+  generic "SCSI disk support", above.
+
+  If you have the ZIP Plus drive or a more recent parallel port ZIP
+  drive (if the supplied cable with the drive is labeled "AutoDetect")
+  then you should say Y here; if you have an older ZIP drive, say N
+  here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
+
+  For more information about this driver and how to use it you should
+  read the file <file:drivers/scsi/README.ppa>.  You should also read
+  the SCSI-HOWTO, which is available from
+  <http://www.linuxdoc.org/docs.html#howto>.  If you use this driver,
+  you will still be able to use the parallel port for other tasks,
+  such as a printer; it is safe to compile both drivers into the
+  kernel.
+
+  This driver is also available as a module which can be inserted in
+  and removed from the running kernel whenever you want.  To compile
+  this driver as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called imm.o.
+
+CONFIG_SCSI_IZIP_EPP16
+  EPP (Enhanced Parallel Port) is a standard for parallel ports which
+  allows them to act as expansion buses that can handle up to 64
+  peripheral devices.
+
+  Some parallel port chipsets are slower than their motherboard, and
+  so we have to control the state of the chipset's FIFO queue every
+  now and then to avoid data loss. This will be done if you say Y
+  here.
+
+  Generally, saying Y is the safe option and slows things down a bit.
+
+CONFIG_SCSI_IZIP_SLOW_CTR
+  Some parallel ports are known to have excessive delays between
+  changing the parallel port control register and good data being
+  available on the parallel port data/status register. This option
+  forces a small delay (1.0 usec to be exact) after changing the
+  control register to let things settle out. Enabling this option may
+  result in a big drop in performance but some very old parallel ports
+  (found in 386 vintage machines) will not work properly.
+
+  Generally, saying N is fine.
+
+CONFIG_SCSI_DEBUG
+  This is a host adapter simulator that can be programmed to simulate
+  a large number of conditions that could occur on a real bus. The
+  advantage is that many hard to reproduce problems can be tested in a
+  controlled environment where there is reduced risk of losing
+  important data. This is primarily of use to people trying to debug
+  the middle and upper layers of the SCSI subsystem. If unsure, say N.
+
+CONFIG_A4000T_SCSI
+  Support for the NCR53C710 SCSI controller on the Amiga 4000T.
+
+CONFIG_A4091_SCSI
+  Support for the NCR53C710 chip on the Amiga 4091 Z3 SCSI2 controller
+  (1993).  Very obscure -- the 4091 was part of an Amiga 4000 upgrade
+  plan at the time the Amiga business was sold to DKB.
+
+CONFIG_A3000_SCSI
+  If you have an Amiga 3000 and have SCSI devices connected to the
+  built-in SCSI controller, say Y. Otherwise, say N. This driver is
+  also available as a module ( = code which can be inserted in and
+  removed from the running kernel whenever you want). The module is
+  called wd33c93.o. If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.
+
+CONFIG_A2091_SCSI
+  If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
+  say N. This driver is also available as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want). The module is called wd33c93.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_GVP11_SCSI
+  If you have a Great Valley Products Series II SCSI controller,
+  answer Y. Also say Y if you have a later model of GVP SCSI
+  controller (such as the GVP A4008 or a Combo board). Otherwise,
+  answer N. This driver does NOT work for the T-Rex series of
+  accelerators from TekMagic and GVP-M.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). The module will be called gvp11.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_CYBERSTORM_SCSI
+  If you have an Amiga with an original (MkI) Phase5 Cyberstorm
+  accelerator board and the optional Cyberstorm SCSI controller,
+  answer Y. Otherwise, say N.
+
+CONFIG_CYBERSTORMII_SCSI
+  If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board
+  and the optional Cyberstorm SCSI controller, say Y. Otherwise,
+  answer N.
+
+CONFIG_BLZ2060_SCSI
+  If you have an Amiga with a Phase5 Blizzard 2060 accelerator board
+  and want to use the onboard SCSI controller, say Y. Otherwise,
+  answer N.
+
+CONFIG_BLZ1230_SCSI
+  If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard
+  1260 accelerator, and the optional SCSI module, say Y. Otherwise,
+  say N.
+
+CONFIG_BLZ603EPLUS_SCSI
+  If you have an Amiga 1200 with a Phase5 Blizzard PowerUP 603e+
+  accelerator, say Y. Otherwise, say N.
+
+CONFIG_FASTLANE_SCSI
+  If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use
+  one in the near future, say Y to this question. Otherwise, say N.
+
+CONFIG_OKTAGON_SCSI
+  If you have the BSC Oktagon SCSI disk controller for the Amiga, say
+  Y to this question.  If you're in doubt about whether you have one,
+  see the picture at
+  <http://amiga.multigraph.com/photos/oktagon.html>.
+
+CONFIG_SCSI_MESH
+  Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
+  SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
+  other Power Macintoshes do). Say Y to include support for this SCSI
+  adaptor. This driver is also available as a module called mesh.o
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want). If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SCSI_MESH_SYNC_RATE
+  On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
+  drives a bus which is entirely internal to the machine (such as the
+  7500, 7600, 8500, etc.), the MESH is capable of synchronous
+  operation at up to 10 MB/s. On machines where the SCSI bus
+  controlled by the MESH can have external devices connected, it is
+  usually rated at 5 MB/s. 5 is a safe value here unless you know the
+  MESH SCSI bus is internal only; in that case you can say 10. Say 0
+  to disable synchronous operation.
+
+CONFIG_SCSI_MAC53C94
+  On Power Macintoshes (and clones) with two SCSI buses, the external
+  SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
+  machines which only have one SCSI bus, such as the 7200, also use
+  the 53C94. Say Y to include support for the 53C94.
+
+  This driver is also available as a module called mac53c94.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/scsi/aic7xxx/Config.help linux/drivers/scsi/aic7xxx/Config.help
--- linux-2.5.3-pre4/drivers/scsi/aic7xxx/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/scsi/aic7xxx/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,39 @@
+CONFIG_SCSI_AIC7XXX
+  This driver supports all of Adaptec's PCI based SCSI controllers
+  (not the hardware RAID controllers though) as well as the aic7770
+  based EISA and VLB SCSI controllers (the 274x and 284x series).
+  This is an Adaptec sponsored driver written by Justin Gibbs.  It is
+  intended to replace the previous aic7xxx driver maintained by Doug
+  Ledford since Doug is no longer maintaining that driver.
+
+CONFIG_AIC7XXX_CMDS_PER_DEVICE
+  Specify the number of commands you would like to allocate per SCSI
+  device when Tagged Command Queueing (TCQ) is enabled on that device.
+
+  This is an upper bound value for the number of tagged transactions
+  to be used for any device.  The aic7xxx driver will automatically
+  vary this number based on device behavior.  For devices with a
+  fixed maximum, the driver will eventually lock to this maximum
+  and display a console message inidicating this value.
+
+  Note: Unless you experience some type of device failure, the default
+	value, no enforced limit, should work for you.
+
+  Default: 253
+
+CONFIG_AIC7XXX_RESET_DELAY_MS
+  The number of milliseconds to delay after an initial bus reset.
+  The bus settle delay following all error recovery actions is
+  dictated by the SCSI layer and is not affected by this value.
+
+  Default: 15000 (15 seconds)
+
+CONFIG_AIC7XXX_BUILD_FIRMWARE
+  This option should only be enabled if you are modifying the firmware
+  source to the aic7xxx driver and wish to have the generated firmware
+  include files updated during a normal kernel build.  The assembler
+  for the firmware requires lex and yacc or their equivalents, as well
+  as the db v1 library.  You may have to install additional packages
+  or modify the assembler make file or the files it includes if your
+  build environment is different than that of the author.
+
diff -urN linux-2.5.3-pre4/drivers/scsi/pcmcia/Config.help linux/drivers/scsi/pcmcia/Config.help
--- linux-2.5.3-pre4/drivers/scsi/pcmcia/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/scsi/pcmcia/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,46 @@
+CONFIG_SCSI_PCMCIA
+  Say Y here if you intend to attach a PCMCIA or CardBus card to your
+  computer which acts as a SCSI host adapter. These are credit card
+  size devices often used with laptops.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions PCMCIA SCSI host adapters.
+
+CONFIG_PCMCIA_NINJA_SCSI
+  If you intend to attach this type of PCMCIA SCSI host adapter to
+  your computer, say Y here and read
+  <file:Documentation/README.nsp_cs.eng>.
+
+  This driver is also available as a module called nsp_cs.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_PCMCIA_AHA152X
+  Say Y here if you intend to attach this type of PCMCIA SCSI host
+  adapter to your computer.
+
+  This driver is also available as a module called aha152x_cs.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_PCMCIA_QLOGIC
+  Say Y here if you intend to attach this type of PCMCIA SCSI host
+  adapter to your computer.
+
+  This driver is also available as a module called qlogic_cs.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_PCMCIA_FDOMAIN
+  Say Y here if you intend to attach this type of PCMCIA SCSI host
+  adapter to your computer.
+
+  This driver is also available as a module called fdomain_cs.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/sgi/Config.help linux/drivers/sgi/Config.help
--- linux-2.5.3-pre4/drivers/sgi/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/sgi/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,38 @@
+CONFIG_SGI_SERIAL
+  If you want to use your SGI's built-in serial ports under Linux,
+  answer Y.
+
+CONFIG_SGI_NEWPORT_GFX
+  If you have an SGI machine and you want to compile the graphics
+  drivers, say Y here. This will include the code for the
+  /dev/graphics and /dev/gfx drivers into the kernel for supporting
+  virtualized access to your graphics hardware.
+
+CONFIG_SGI_DS1286
+  If you say Y here and create a character special file /dev/rtc with
+  major number 10 and minor number 135 using mknod ("man mknod"), you
+  will get access to the real time clock built into your computer.
+  Every SGI has such a clock built in. It reports status information
+  via the file /proc/rtc and its behaviour is set by various ioctls on
+  /dev/rtc.
+
+CONFIG_SERIAL_CONSOLE
+  If you say Y here, it will be possible to use a serial port as the
+  system console (the system console is the device which receives all
+  kernel messages and warnings and which allows logins in single user
+  mode). This could be useful if some terminal or printer is connected
+  to that serial port.
+
+  Even if you say Y here, the currently visible virtual console
+  (/dev/tty0) will still be used as the system console by default, but
+  you can alter that using a kernel command line option such as
+  "console=ttyS1". (Try "man bootparam" or see the documentation of
+  your boot loader (lilo or loadlin) about how to pass options to the
+  kernel at boot time.)
+
+  If you don't have a VGA card installed and you say Y here, the
+  kernel will automatically use the first serial line, /dev/ttyS0, as
+  system console.
+
+  If unsure, say N.
+
diff -urN linux-2.5.3-pre4/drivers/sound/Config.help linux/drivers/sound/Config.help
--- linux-2.5.3-pre4/drivers/sound/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/sound/Config.help	Thu Jan 24 12:35:36 2002
@@ -0,0 +1,723 @@
+CONFIG_INPUT_GAMEPORT
+  Gameport support is for the standard 15-pin PC gameport.  If you
+  have a joystick, gamepad, gameport card, a soundcard with a gameport
+  or anything else that uses the gameport, say Y or M here and also to
+  at least one of the hardware specific drivers.
+  Please read the file <file:Documentation/input/joystick.txt> which
+  contains more information and the location of the joystick package
+  that you'll need if you use the gameport with a joystick.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called gameport.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_SOUND_OSS
+  OSS is the Open Sound System suite of sound card drivers.  They make
+  sound programming easier since they provide a common API.  Say Y or
+  M here (the module will be called sound.o) if you haven't found a
+  driver for your sound card above, then pick your driver from the
+  list below.
+
+CONFIG_SOUND_DMAP
+  Linux can often have problems allocating DMA buffers for ISA sound
+  cards on machines with more than 16MB of RAM. This is because ISA
+  DMA buffers must exist below the 16MB boundary and it is quite
+  possible that a large enough free block in this region cannot be
+  found after the machine has been running for a while. If you say Y
+  here the DMA buffers (64Kb) will be allocated at boot time and kept
+  until the shutdown. This option is only useful if you said Y to
+  "OSS sound modules", above. If you said M to "OSS sound modules"
+  then you can get the persistent DMA buffer functionality by passing
+  the command-line argument "dmabuf=1" to the sound.o module.
+
+  Say Y unless you have 16MB or more RAM or a PCI sound card.
+
+CONFIG_SOUND_SGALAXY
+  This module initializes the older non Plug and Play sound galaxy
+  cards from Aztech. It supports the Waverider Pro 32 - 3D and the
+  Galaxy Washington 16.
+
+  If you compile the driver into the kernel, you have to add
+  "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
+  line.
+
+CONFIG_SOUND_AD1816
+  Say M here if you have a sound card based on the Analog Devices
+  AD1816(A) chip.
+
+  If you compile the driver into the kernel, you have to add
+  "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+CONFIG_SOUND_OPL3SA1
+  Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
+  usually built into motherboards. Read
+  <file:Documentation/sound/OPL3-SA> for details.
+
+  If you compile the driver into the kernel, you have to add
+  "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+  command line.
+
+CONFIG_SOUND_PAS
+  Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
+  16 or Logitech SoundMan 16 sound card. Answer N if you have some
+  other card made by Media Vision or Logitech since those are not
+  PAS16 compatible. Please read <file:Documentation/sound/PAS16>.
+  It is not necessary to add Sound Blaster support separately; it
+  is included in PAS support.
+
+  If you compile the driver into the kernel, you have to add
+  "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
+  to the kernel command line.
+
+CONFIG_PAS_JOYSTICK
+  Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
+  port.
+
+CONFIG_SOUND_SB
+  Answer Y if you have an original Sound Blaster card made by Creative
+  Labs or a 100% hardware compatible clone (like the Thunderboard or
+  SM Games). For an unknown card you may answer Y if the card claims
+  to be Sound Blaster-compatible.
+
+  Please read the file <file:Documentation/sound/Soundblaster>.
+
+  You should also say Y here for cards based on the Avance Logic
+  ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/ALS>) and
+  for cards based on ESS chips (read
+  <file:Documentation/sound/ESS1868> and
+  <file:Documentation/sound/ESS>). If you have an SB AWE 32 or SB AWE
+  64, say Y here and also to "AWE32 synth" below and read
+  <file:Documentation/sound/INSTALL.awe>. If you have an IBM Mwave
+  card, say Y here and read <file:Documentation/sound/mwave>.
+
+  If you compile the driver into the kernel and don't want to use
+  isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
+  command line.
+
+  You can say M here to compile this driver as a module; the module is
+  called sb.o.
+
+CONFIG_SOUND_GUS
+  Say Y here for any type of Gravis Ultrasound card, including the GUS
+  or GUS MAX.  See also <file:Documentation/sound/ultrasound> for more
+  information on configuring this card with modules.
+
+  If you compile the driver into the kernel, you have to add
+  "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+CONFIG_SOUND_MPU401
+  Be careful with this question.  The MPU401 interface is supported by
+  all sound cards.  However, some natively supported cards have their
+  own driver for MPU401.  Enabling this MPU401 option with these cards
+  will cause a conflict.  Also, enabling MPU401 on a system that
+  doesn't really have a MPU401 could cause some trouble.  If your card
+  was in the list of supported cards, look at the card specific
+  instructions in the <file:Documentation/sound/README.OSS> file.  It
+  is safe to answer Y if you have a true MPU401 MIDI interface card.
+
+  If you compile the driver into the kernel, you have to add
+  "mpu401=<io>,<irq>" to the kernel command line.
+
+CONFIG_SOUND_UART6850
+  This option enables support for MIDI interfaces based on the 6850
+  UART chip. This interface is rarely found on sound cards. It's safe
+  to answer N to this question.
+
+  If you compile the driver into the kernel, you have to add
+  "uart6850=<io>,<irq>" to the kernel command line.
+
+CONFIG_SOUND_PSS
+  Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
+  ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
+  ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
+  how to compile it into the kernel or as a module see the file
+  <file:Documentation/sound/PSS>.
+
+  If you compile the driver into the kernel, you have to add
+  "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
+  command line.
+
+CONFIG_PSS_MIXER
+  Answer Y for Beethoven ADSP-16. You may try to say Y also for other
+  cards if they have master volume, bass, treble, and you can't
+  control it under Linux. If you answer N for Beethoven ADSP-16, you
+  can't control master volume, bass, treble and synth volume.
+
+  If you said M to "PSS support" above, you may enable or disable this
+  PSS mixer with the module parameter pss_mixer. For more information
+  see the file <file:Documentation/sound/PSS>.
+
+CONFIG_PSS_HAVE_BOOT
+  If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
+  to include this file. Without this file the synth device (OPL) may
+  not work.
+
+CONFIG_PSS_BOOT_FILE
+  Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
+  starting from /.
+
+CONFIG_SOUND_MSS
+  Again think carefully before answering Y to this question.  It's
+  safe to answer Y if you have the original Windows Sound System card
+  made by Microsoft or Aztech SG 16 Pro (or NX16 Pro).  Also you may
+  say Y in case your card is NOT among these:
+
+     ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
+     Ensoniq SoundScape (and compatibles made by Reveal and Spea),
+     Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
+     Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
+     Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
+     82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
+     Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
+     SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
+     Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
+     Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
+     Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
+     notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
+     synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
+
+  For cards having native support in VoxWare, consult the card
+  specific instructions in <file:Documentation/sound/README.OSS>.
+  Some drivers have their own MSS support and saying Y to this option
+  will cause a conflict.
+
+  If you compile the driver into the kernel, you have to add
+  "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
+  line.
+
+CONFIG_SOUND_VWSND
+  Say Y or M if you have an SGI Visual Workstation and you want to be
+  able to use its on-board audio.  Read
+  <file:Documentation/sound/vwsnd> for more info on this driver's
+  capabilities.
+
+CONFIG_SOUND_SSCAPE
+  Answer Y if you have a sound card based on the Ensoniq SoundScape
+  chipset. Such cards are being manufactured at least by Ensoniq, Spea
+  and Reveal (Reveal makes also other cards).
+
+  If you compile the driver into the kernel, you have to add
+  "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
+  line.
+
+CONFIG_SOUND_TRIX
+  Answer Y if you have the AudioTriX Pro sound card manufactured
+  by MediaTrix.
+
+CONFIG_TRIX_HAVE_BOOT
+  The MediaTrix AudioTrix Pro has an on-board microcontroller which
+  needs to be initialized by downloading the code from the file
+  TRXPRO.HEX in the DOS driver directory. If you don't have the
+  TRXPRO.HEX file handy you may skip this step. However, the SB and
+  MPU-401 modes of AudioTrix Pro will not work without this file!
+
+CONFIG_TRIX_BOOT_FILE
+  Enter the full pathname of your TRXPRO.HEX file, starting from /.
+
+CONFIG_SOUND_MAD16
+  Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
+  82C928 or 82C929 or 82C931) audio interface chip. These chips are
+  quite common so it's possible that many no-name cards have one of
+  them. In addition the MAD16 chip is used in some cards made by known
+  manufacturers such as Turtle Beach (Tropez), Reveal (some models)
+  and Diamond (latest ones). Note however that the Tropez sound cards
+  have their own driver; if you have one of those, say N here and Y or
+  M to "Full support for Turtle Beach WaveFront", below.
+
+  If you compile the driver into the kernel, you have to add
+  "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
+  kernel command line.
+
+  See also <file:Documentation/sound/Opti> and
+  <file:Documentation/sound/MAD16> for more information on setting
+  these cards up as modules.
+
+CONFIG_SOUND_WAVEFRONT
+  Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
+  and read the files <file:Documentation/sound/Wavefront> and
+  <file:Documentation/sound/Tropez+>.
+
+CONFIG_MAD16_OLDCARD
+  Answer Y (or M) if you have an older card based on the C928 or
+  Mozart chipset and you want to have MIDI support. If you enable this
+  option you also need to enable support for Sound Blaster.
+
+CONFIG_SOUND_CS4232
+  Say Y here if you have a card based on the Crystal CS4232 chip set,
+  which uses its own Plug and Play protocol.
+
+  If you compile the driver into the kernel, you have to add
+  "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+  command line.
+
+  See <file:Documentation/sound/CS4232> for more information on
+  configuring this card.
+
+CONFIG_SOUND_OPL3SA2
+  Say Y or M if you have a card based on one of these Yamaha sound
+  chipsets or the "SAx", which is actually a SA3. Read
+  <file:Documentation/sound/OPL3-SA2> for more information on
+  configuring these cards.
+
+  If you compile the driver into the kernel and do not also
+  configure in the optional ISA PnP support, you will have to add
+  "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
+  command line.
+
+CONFIG_SOUND_MAUI
+  Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
+  sound card.
+
+  If you compile the driver into the kernel, you have to add
+  "maui=<io>,<irq>" to the kernel command line.
+
+CONFIG_MAUI_HAVE_BOOT
+  Turtle Beach Maui and Tropez sound cards have a microcontroller
+  which needs to be initialized prior to use. OSWF.MOT is a file
+  distributed with the card's DOS/Windows drivers. Answer Y if you
+  have this file.
+
+CONFIG_MAUI_BOOT_FILE
+  Enter the full pathname of your OSWF.MOT file, starting from /.
+
+CONFIG_SOUND_MSNDCLAS
+  Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
+  Monterey (not for the Pinnacle or Fiji).
+
+  See <file:Documentation/sound/MultiSound> for important information
+  about this driver.  Note that it has been discontinued, but the
+  Voyetra Turtle Beach knowledge base entry for it is still available
+  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/790.asp>.
+
+CONFIG_MSNDCLAS_IO
+  I/O port address for the MultiSound Classic and related cards.
+
+CONFIG_MSNDCLAS_IRQ
+  Interrupt Request line for the MultiSound Classic and related cards.
+
+CONFIG_MSNDCLAS_MEM
+  Memory-mapped I/O base address for the MultiSound Classic and
+  related cards.
+
+CONFIG_MSNDCLAS_INIT_FILE
+  The MultiSound cards have two firmware files which are required for
+  operation, and are not currently included. These files can be
+  obtained from Turtle Beach. See
+  <file:Documentation/sound/MultiSound> for information on how to
+  obtain this.
+
+CONFIG_MSNDCLAS_PERM_FILE
+  The MultiSound cards have two firmware files which are required for
+  operation, and are not currently included. These files can be
+  obtained from Turtle Beach. See
+  <file:Documentation/sound/MultiSound> for information on how to
+  obtain this.
+
+CONFIG_SOUND_MSNDPIN
+  Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
+  See <file:Documentation/sound/MultiSound> for important information
+  about this driver. Note that it has been discontinued, but the
+  Voyetra Turtle Beach knowledge base entry for it is still available
+  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/600.asp>.
+
+CONFIG_MSNDPIN_IDE_IO0
+  CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
+  Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_IDE_IO1
+  CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
+  Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_IDE_IRQ
+  Interrupt request number for the IDE CD-ROM interface on the
+  MultiSound Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_IO
+  Memory-mapped I/O base address for the primary synthesizer on
+  MultiSound Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_MPU_IO
+  Memory-mapped I/O base address for the Kurzweil daughterboard
+  synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_MPU_IRQ
+  Iinterrupt request number for the Kurzweil daughterboard
+  synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_IRQ
+  Interrupt request line for the primary synthesizer on MultiSound
+  Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_JOYSTICK_IO
+  Memory-mapped I/O base address for the joystick port on MultiSound
+  Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_MEM
+  Memory-mapped I/O base address for the primary synthesizer on
+  MultiSound Pinnacle and Fiji sound cards.
+
+CONFIG_MSNDPIN_INIT_FILE
+  The MultiSound cards have two firmware files which are required
+  for operation, and are not currently included. These files can be
+  obtained from Turtle Beach. See
+  <file:Documentation/sound/MultiSound> for information on how to
+  obtain this.
+
+CONFIG_MSNDPIN_PERM_FILE
+  The MultiSound cards have two firmware files which are required for
+  operation, and are not currently included. These files can be
+  obtained from Turtle Beach. See
+  <file:Documentation/sound/MultiSound> for information on how to
+  obtain this.
+
+CONFIG_MSNDPIN_DIGITAL
+  If you have the S/PDIF daughter board for the Pinnacle or Fiji,
+  answer Y here; otherwise, say N. If you have this, you will be able
+  to play and record from the S/PDIF port (digital signal). See
+  <file:Documentation/sound/MultiSound> for information on how to make
+  use of this capability.
+
+CONFIG_MSNDPIN_NONPNP
+  The Pinnacle and Fiji card resources can be configured either with
+  PnP, or through a configuration port. Say Y here if your card is NOT
+  in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
+  use of the IDE and joystick peripherals on the card as well; these
+  do not show up when the card is in PnP mode. Specifying zero for any
+  resource of a device will disable the device. If you are running the
+  card in PnP mode, you must say N here and use isapnptools to
+  configure the card's resources.
+
+CONFIG_MSNDPIN_CFG
+  This is the port which the Pinnacle and Fiji uses to configure the
+  card's resources when not in PnP mode. If your card is in PnP mode,
+  then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
+  Mode".
+
+CONFIG_MSND_FIFOSIZE
+  Configures the size of each audio buffer, in kilobytes, for
+  recording and playing in the MultiSound drivers (both the Classic
+  and Pinnacle). Larger values reduce the chance of data overruns at
+  the expense of overall latency. If unsure, use the default.
+
+CONFIG_SOUND_YM3812
+  Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
+  Answering Y is usually a safe and recommended choice, however some
+  cards may have software (TSR) FM emulation. Enabling FM support with
+  these cards may cause trouble (I don't currently know of any such
+  cards, however). Please read the file
+  <file:Documentation/sound/OPL3> if your card has an OPL3 chip.
+
+  If you compile the driver into the kernel, you have to add
+  "opl3=<io>" to the kernel command line.
+
+  If unsure, say Y.
+
+CONFIG_SOUND_ACI_MIXER
+  ACI (Audio Command Interface) is a protocol used to communicate with
+  the microcontroller on some sound cards produced by miro and
+  Cardinal Technologies.  The main function of the ACI is to control
+  the mixer and to get a product identification.
+
+  This VoxWare ACI driver currently supports the ACI functions on the
+  miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
+  also controls the radio tuner. This is supported in the video4linux
+  miropcm20 driver (say M or Y here and go back to "Multimedia
+  devices" -> "Radio Adapters").
+
+  This driver is also available as a module and will be called aci.o.
+
+CONFIG_SOUND_AWE32_SYNTH
+  Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
+  similar sound card. See <file:Documentation/sound/README.awe>,
+  <file:Documentation/sound/AWE32> and the Soundblaster-AWE
+  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>
+  for more info.
+
+CONFIG_SOUND_AEDSP16
+  Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
+  driver supports Audio Excel DSP 16 but not the III nor PnP versions
+  of this card.
+
+  The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
+  a Microsoft Sound System card, so you should have said Y to either
+  "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
+  or "Microsoft Sound System support", above, and you need to answer
+  the "MSS emulation" and "SBPro emulation" questions below
+  accordingly. You should say Y to one and only one of these two
+  questions.
+
+  Read the <file:Documentation/sound/README.OSS> file and the head of
+  <file:drivers/sound/aedsp16.c> as well as
+  <file:Documentation/sound/AudioExcelDSP16> to get more information
+  about this driver and its configuration.
+
+CONFIG_AEDSP16_SBPRO
+  Answer Y if you want your audio card to emulate Sound Blaster Pro.
+  You should then say Y to "100% Sound Blaster compatibles
+  (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
+  emulation)".
+
+  If you compile the driver into the kernel, you have to add
+  "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
+  command line.
+
+CONFIG_AEDSP16_MSS
+  Answer Y if you want your audio card to emulate Microsoft Sound
+  System. You should then say Y to "Microsoft Sound System support"
+  and say N to "Audio Excel DSP 16 (SBPro emulation)".
+
+CONFIG_SC6600
+  The SC6600 is the new version of DSP mounted on the Audio Excel DSP
+  16 cards. Find in the manual the FCC ID of your audio card and
+  answer Y if you have an SC6600 DSP.
+
+CONFIG_SC6600_JOY
+  Say Y here in order to use the joystick interface of the Audio Excel
+  DSP 16 card.
+
+CONFIG_SC6600_CDROMBASE
+  Base I/O port address for the CD-ROM interface of the Audio Excel
+  DSP 16 card.
+
+CONFIG_AEDSP16_MPU401
+  Answer Y if you want your audio card to emulate the MPU-401 midi
+  interface. You should then also say Y to "MPU-401 support".
+
+  Note that the I/O base for MPU-401 support of aedsp16 is the same
+  you have selected for "MPU-401 support". If you are using this
+  driver as a module you have to specify the MPU I/O base address with
+  the parameter 'mpu_base=0xNNN'.
+
+CONFIG_SOUND_CMPCI
+  Say Y or M if you have a PCI sound card using the CMI8338
+  or the CMI8378 chipset.  Data on these chips are available at
+  <http://www.cmedia.com.tw/>.
+
+  A userspace utility to control some internal registers of these
+  chips is available at
+  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+CONFIG_SOUND_CMPCI_CM8738
+  Say Y or M if you have a PCI sound card using the CMI8338
+  or the CMI8378 chipset.  Data on this chip is available at
+  <http://www.cmedia.com.tw/doc8738.htm>.
+
+  A userspace utility to control some internal registers of these
+  chips is available at
+  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+CONFIG_SOUND_CMPCI_JOYSTICK
+  Say here in order to enable the joystick port on a sound crd using
+  the CMI8338 or the CMI8738 chipset.  Data on these chips are
+  available at <http://www.cmedia.com.tw/>.
+
+CONFIG_SOUND_CMPCI_SPEAKERS
+  Specify the number of speaker channels you want the card to drive,
+  as an integer.
+
+CONFIG_SOUND_CMPCI_SPDIFLOOP
+  Enable loopback from SPDIF in to SPDIF out.  For discussion, see
+  "The 8738 Audio SPDIF In/Out Technical Data" on the technical
+  support page at <http://www.cmedia.com.tw/>.
+
+  A userspace utility to control even more internal registers of these
+  chips is available at
+  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+  This package will among other things help you enable SPDIF 
+  out/in/loop/monitor.
+
+CONFIG_SOUND_EMU10K1
+  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
+  such as the Creative SBLive!, SB PCI512 or Emu-APS.
+
+  For more information on this driver and the degree of support for the
+  different card models please check <http://opensource.creative.com/>.
+
+  It is now possible to load dsp microcode patches into the EMU10K1
+  chip.  These patches are used to implement real time sound
+  processing effects which include for example: signal routing,
+  bass/treble control, AC3 passthrough, ...
+  Userspace tools to create new patches and load/unload them can be
+  found at <http://opensource.creative.com/dist.html>.
+
+CONFIG_MIDI_EMU10K1
+  Say Y if you want to be able to use the OSS /dev/sequencer
+  interface.  This code is still experimental.
+
+CONFIG_SOUND_FUSION
+  This module drives the Crystal SoundFusion devices (CS4280/46xx
+  series) when wired as native sound drivers with AC97 codecs.  If
+  this driver does not work try the CS4232 driver.
+
+CONFIG_SOUND_ES1370
+  Say Y or M if you have a PCI sound card utilizing the Ensoniq
+  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
+  out if your sound card uses an ES1370 without removing your
+  computer's cover, use lspci -n and look for the PCI ID
+  1274:5000. Since Ensoniq was bought by Creative Labs,
+  Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
+  This driver differs slightly from OSS/Free, so PLEASE READ
+  <file:Documentation/sound/es1370>.
+
+CONFIG_SOUND_ES1371
+  Say Y or M if you have a PCI sound card utilizing the Ensoniq
+  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
+  your sound card uses an ES1371 without removing your computer's
+  cover, use lspci -n and look for the PCI ID 1274:1371. Since
+  Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
+  models are either ES1370 or ES1371 based. This driver differs
+  slightly from OSS/Free, so PLEASE READ
+  <file:Documentation/sound/es1371>.
+
+CONFIG_SOUND_ESSSOLO1
+  Say Y or M if you have a PCI sound card utilizing the ESS Technology
+  Solo1 chip. To find out if your sound card uses a
+  Solo1 chip without removing your computer's cover, use
+  lspci -n and look for the PCI ID 125D:1969. This driver
+  differs slightly from OSS/Free, so PLEASE READ
+  <file:Documentation/sound/solo1>.
+
+CONFIG_SOUND_SONICVIBES
+  Say Y or M if you have a PCI sound card utilizing the S3
+  SonicVibes chipset. To find out if your sound card uses a
+  SonicVibes chip without removing your computer's cover, use
+  lspci -n and look for the PCI ID 5333:CA00. This driver
+  differs slightly from OSS/Free, so PLEASE READ
+  <file:Documentation/sound/sonicvibes>.
+
+CONFIG_SOUND_TRIDENT
+  Say Y or M if you have a PCI sound card utilizing the Trident
+  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
+  or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
+  in SiS960 Super South Bridge and SiS540/630 Single Chipset.
+  The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
+  M1535+ or M1535D+ South Bridge.
+
+  Use lspci -n to find out if your sound card or chipset uses
+  Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
+  for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
+  10B9:5451 stands for ALi5451.
+
+  This driver supports S/PDIF in/out (record/playback) for ALi 5451
+  embedded in ALi M1535+ and M1535D+. Note that they aren't all
+  enabled by default; you can enable them by saying Y to "/proc file
+  system support" and "Sysctl support", and after the /proc file
+  system has been mounted, executing the command
+
+	command			what is enabled
+
+  echo 0>/proc/ALi5451	pcm out is also set to S/PDIF out. (Default).
+
+  echo 1>/proc/ALi5451	use S/PDIF out to output pcm data.
+
+  echo 2>/proc/ALi5451	use S/PDIF out to output non-pcm data.
+                        (AC3...).
+
+  echo 3>/proc/ALi5451	record from Ac97 in(MIC, Line in...).
+                        (Default).
+
+  echo 4>/proc/ALi5451	no matter Ac97 settings, record from S/PDIF
+                        in.
+
+
+  This driver differs slightly from OSS/Free, so PLEASE READ the
+  comments at the top of <file:drivers/sound/trident.c>.
+
+CONFIG_SOUND_WAVEARTIST
+  Say Y here to include support for the Rockwell WaveArtist sound
+  system.  This driver is mainly for the NetWinder.
+
+CONFIG_SOUND_VIA82CXXX
+  Say Y here to include support for the audio codec found on VIA
+  82Cxxx-based chips. Typically these are built into a motherboard.
+
+  DO NOT select Sound Blaster or Adlib with this driver, unless
+  you have a Sound Blaster or Adlib card in addition to your VIA
+  audio chip.
+
+CONFIG_MIDI_VIA82CXXX
+  Answer Y to use the MIDI interface of the Via686. You may need to
+  enable this in the BIOS before it will work. This is for connection
+  to external MIDI hardware, and is not required for software playback
+  of MIDI files.
+
+CONFIG_SOUND_NM256
+  Say M here to include audio support for the NeoMagic 256AV/256ZX
+  chipsets. These are the audio chipsets found in the Sony
+  Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
+  laptops. It includes support for an AC97-compatible mixer and an
+  apparently proprietary sound engine.
+
+  See <file:Documentation/sound/NM256> for further information.
+
+CONFIG_SOUND_MAESTRO
+  Say Y or M if you have a sound system driven by ESS's Maestro line
+  of PCI sound chips.  These include the Maestro 1, Maestro 2, and
+  Maestro 2E.  See <file:Documentation/sound/Maestro> for more
+  details.
+
+CONFIG_SOUND_MAESTRO3
+  Say Y or M if you have a sound system driven by ESS's Maestro 3
+  PCI sound chip.
+
+CONFIG_SOUND_ADLIB
+  Includes ASB 64 4D. Information on programming AdLib cards is
+  available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
+
+CONFIG_SOUND_CS4281
+  Picture and feature list at
+  <http://www.pcbroker.com/crystal4281.html>.
+
+CONFIG_SOUND_GUS16
+  Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
+  sampling at 16-bit width.
+
+CONFIG_SOUND_GUSMAX
+  Support for Gravis Ulstrasound MAX.
+
+CONFIG_SOUND_ICH
+  Support for integral audio in Intel's I/O Controller Hub (ICH)
+  chipset, as used on the 810/820/840 motherboards.
+
+CONFIG_SOUND_TRACEINIT
+  Verbose soundcard initialization -- affects the format of autoprobe
+  and initialization messages at boot time.
+
+CONFIG_SOUND_TVMIXER
+  Support for audio mixer facilities on the BT848 TV frame-grabber
+  card.
+
+CONFIG_SOUND_VIDC
+  16-bit support for the VIDC onboard sound hardware found on Acorn
+  machines.
+
+CONFIG_SOUND_VMIDI
+  Support for MIDI loopback on port 1 or 2.
+
+CONFIG_SOUND_YMFPCI
+  Support for Yamaha cards including the YMF711, YMF715, YMF718,
+  YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
+
+CONFIG_SOUND_YMFPCI_LEGACY
+  Support for YMF7xx PCI cards emulating an MP401.
+
+CONFIG_SOUND_RME96XX
+  Say Y or M if you have a Hammerfall, Hammerfall light or Hammerfall
+  DSP card from RME.
+
+CONFIG_SOUND_BT878
+  Audio DMA support for bt878 based grabber boards.  As you might have
+  already noticed, bt878 is listed with two functions in /proc/pci.
+  Function 0 does the video stuff (bt848 compatible), function 1 does
+  the same for audio data.  This is a driver for the audio part of
+  the chip.  If you say 'Y' here you get a oss-compatible dsp device
+  where you can record from.  If you want just watch TV you probably
+  don't need this driver as most TV cards handle sound with a short
+  cable from the TV card to your sound card's line-in.
+
+  This driver is available as a module called btaudio.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/sound/dmasound/Config.help linux/drivers/sound/dmasound/Config.help
--- linux-2.5.3-pre4/drivers/sound/dmasound/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/sound/dmasound/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,47 @@
+CONFIG_DMASOUND
+  Support built-in audio chips accessible by DMA on various machines
+  that have them.  Note that this symbol does not affect the kernel
+  directly; rather, it controls whether configuration questions
+  enabling DMA sound drivers for various specific machine
+  architectures will be used.
+
+CONFIG_DMASOUND_ATARI
+  If you want to use the internal audio of your Atari in Linux, answer
+  Y to this question. This will provide a Sun-like /dev/audio,
+  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_DMASOUND_AWACS
+  If you want to use the internal audio of your PowerMac in Linux,
+  answer Y to this question. This will provide a Sun-like /dev/audio,
+  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_DMASOUND_PAULA
+  If you want to use the internal audio of your Amiga in Linux, answer
+  Y to this question. This will provide a Sun-like /dev/audio,
+  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_DMASOUND_Q40
+  If you want to use the internal audio of your Q40 in Linux, answer
+  Y to this question. This will provide a Sun-like /dev/audio,
+  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/sound/via82cxxx_audio.c linux/drivers/sound/via82cxxx_audio.c
--- linux-2.5.3-pre4/drivers/sound/via82cxxx_audio.c	Thu Jan 24 12:35:17 2002
+++ linux/drivers/sound/via82cxxx_audio.c	Thu Jan 24 12:35:37 2002
@@ -1358,7 +1358,7 @@
 
 static int via_mixer_open (struct inode *inode, struct file *file)
 {
-	int minor = MINOR(inode->i_rdev);
+	int minor = minor(inode->i_rdev);
 	struct via_info *card;
 	struct pci_dev *pdev;
 	struct pci_driver *drvr;
@@ -2974,7 +2974,7 @@
 
 static int via_dsp_open (struct inode *inode, struct file *file)
 {
-	int minor = MINOR(inode->i_rdev);
+	int minor = minor(inode->i_rdev);
 	struct via_info *card;
 	struct pci_dev *pdev;
 	struct via_channel *chan;
diff -urN linux-2.5.3-pre4/drivers/telephony/Config.help linux/drivers/telephony/Config.help
--- linux-2.5.3-pre4/drivers/telephony/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/telephony/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,28 @@
+CONFIG_PHONE
+  Say Y here if you have a telephony card, which for example allows
+  you to use a regular phone for voice-over-IP applications.
+
+  Note: this has nothing to do with modems.  You do not need to say Y
+  here in order to be able to use a modem under Linux.
+
+  This support is also available as a module.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  phonedev.o.
+
+CONFIG_PHONE_IXJ
+  Say M if you have a telephony card manufactured by Quicknet
+  Technologies, Inc.  These include the Internet PhoneJACK and
+  Internet LineJACK Telephony Cards. You will get a module called
+  ixj.o.
+
+  For the ISA versions of these products, you can configure the
+  cards using the isapnp tools (pnpdump/isapnp) or you can use the
+  isapnp support.  Please read <file:Documentation/telephony/ixj.txt>.
+
+  For more information on these cards, see Quicknet's web site at:
+  <http://www.quicknet.net/>.
+
+  If you do not have any Quicknet telephony cards, you can safely
+  say N here.
+
diff -urN linux-2.5.3-pre4/drivers/usb/Config.help linux/drivers/usb/Config.help
--- linux-2.5.3-pre4/drivers/usb/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/usb/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,600 @@
+CONFIG_USB
+  Universal Serial Bus (USB) is a specification for a serial bus
+  subsystem which offers higher speeds and more features than the
+  traditional PC serial port.  The bus supplies power to peripherals
+  and allows for hot swapping.  Up to 127 USB peripherals can be
+  connected to a single USB port in a tree structure.  The USB port is
+  the root of the tree, the peripherals are the leaves and the inner
+  nodes are special USB devices called hubs.  Many newer PC's have USB
+  ports and newer peripherals such as scanners, keyboards, mice,
+  modems, and printers support the USB protocol and can be connected
+  to the PC via those ports.
+
+  Say Y here if your computer has a USB port and you want to use USB
+  devices.  You then need to say Y to at least one of "UHCI support"
+  or "OHCI support" below (the type of interface that the USB hardware
+  in your computer provides to the operating system) and then choose
+  from among the drivers for USB peripherals.  You may want to check
+  out the information provided in <file:Documentation/usb/> and
+  especially the links given in <file:Documentation/usb/usb-help.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbcore.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_DEBUG
+  Say Y here if you want the USB core & hub drivers to produce a bunch
+  of debug messages to the system log. Select this if you are having a
+  problem with USB support and want to see more of what is going on.
+
+CONFIG_USB_LONG_TIMEOUT
+  This option makes the standard time out a bit longer.  Basically,
+  some devices are just slow to respond, so this makes usb more
+  patient.  There should be no harm in selecting this, but it is
+  needed for some MGE Ellipse UPSes.
+
+  If you have an MGE Ellipse UPS, or you see timeouts in HID
+  transactions, say Y; otherwise say N.
+
+CONFIG_USB_UHCI
+  The Universal Host Controller Interface is a standard by Intel for
+  accessing the USB hardware in the PC (which is also called the USB
+  host controller). If your USB host controller conforms to this
+  standard, you may want to say Y, but see below. All recent boards
+  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+  i810, i820) conform to this standard. Also all VIA PCI chipsets
+  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+  133).
+
+  Currently there exist two drivers for UHCI host controllers: this
+  one and the so-called JE driver, which you can get from
+  "UHCI alternate (JE) support", below. You need only one.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usb-uhci.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_UHCI_ALT
+  The Universal Host Controller Interface is a standard by Intel for
+  accessing the USB hardware in the PC (which is also called the USB
+  host controller). If your USB host controller conforms to this
+  standard, you may want to say Y, but see below. All recent boards
+  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+  i810, i820) conform to this standard. Also all VIA PCI chipsets
+  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+  133). If unsure, say Y.
+
+  Currently there exist two drivers for UHCI host controllers: this
+  so-called JE driver, and the one you get from "UHCI support", above.
+  You need only one.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called uhci.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_OHCI
+  The Open Host Controller Interface is a standard by
+  Compaq/Microsoft/National for accessing the USB PC hardware (also
+  called USB host controller). If your USB host controller conforms to
+  this standard, say Y. The USB host controllers on most non-Intel
+  architectures and on several x86 compatibles with non-Intel chipsets
+  -- like SiS (aktual 610, 610 and so on) or ALi (ALi IV, ALi V,
+  Aladdin Pro..) -- conform to this standard.
+
+  You may want to read <file:Documentation/usb/ohci.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usb-ohci.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_HID
+  Say Y here if you want full HID support to connect keyboards,
+  mice, joysticks, graphic tablets, or any other HID based devices
+  to your computer via USB. You can't use this driver and the
+  HIDBP (Boot Protocol) keyboard and mouse drivers at the same time.
+  More information is available: <file:Documentation/input/input.txt>.
+
+  If unsure, say Y.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called hid.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_HIDDEV
+  Say Y here if you want to support HID devices (from the USB
+  specification standpoint) that aren't strictly user interface
+  devices, like monitor controls and Uninterruptable Power Supplies.
+
+  This module supports these devices separately using a separate
+  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
+  This driver requires CONFIG_USB_HID.
+
+  If unsure, say N.
+
+CONFIG_USB_KBD
+  Say Y here if you don't want to use the generic HID driver for your
+  USB keyboard and prefer to use the keyboard in its limited Boot
+  Protocol mode instead. This driver is much smaller than the HID one.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_USB_MOUSE
+  Say Y here if you don't want to use the generic HID driver for your
+  USB mouse and prefer to use the mouse in its limited Boot Protocol
+  mode instead. This driver is much smaller than the HID one.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbmouse.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_USB_WACOM
+  Say Y here if you want to use the USB version of the Wacom Intuos
+  or Graphire tablet.  Make sure to say Y to "Mouse support"
+  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+  (CONFIG_INPUT_EVDEV) as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wacom.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SCANNER
+  Say Y here if you want to connect a USB scanner to your computer's
+  USB port. Please read <file:Documentation/usb/scanner.txt> and
+  <file:Documentation/usb/scanner-hp-sane.txt> for more information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scanner.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_AUDIO
+  Say Y here if you want to connect USB audio equipment such as
+  speakers to your computer's USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called audio.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_ACM
+  This driver supports USB modems and ISDN adapters which support the
+  Communication Device Class Abstract Control Model interface.
+  Please read <file:Documentation/usb/acm.txt> for details.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called acm.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PRINTER
+  Say Y here if you want to connect a USB printer to your computer's
+  USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called printer.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_IBMCAM
+  Say Y here if you want to connect a IBM "C-It" camera, also known as
+  "Xirlink PC Camera" to your computer's USB port.  For more
+  information, read <file:Documentation/usb/ibmcam.txt>.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ibmcam.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>. This
+  camera has several configuration options which can be specified when
+  you load the module.  Read <file:Documentation/usb/ibmcam.txt> to
+  learn more.
+
+CONFIG_USB_OV511
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. See <file:Documentation/usb/ov511.txt> for more
+  information and for a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Character Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ov511.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_CDCETHER
+  This driver supports devices conforming to the Communication Device
+  Class Ethernet Control Model.  This is used in some cable modems.
+  For more details on the specification, get the Communication Device
+  Class specification from <http://www.usb.org/>.
+
+  This driver should work with the following devices:
+        * Ericsson PipeRider (all variants)
+        * Motorola (DM100 and SB4100)
+        * Broadcom Cable Modem (reference design)
+        * Toshiba PCX1100U and possibly other cable modems
+
+  The device creates a network device (ethX, where X depends on what
+  other networking devices you have in use), as for a normal PCI
+  or ISA based ethernet network card.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called CDCEther.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PWC
+  Say Y or M here if you want to use one of these Philips USB webcams:
+  PCA645, PCA646, PCVC675, PCVC680, PCVC690, PCVC730, PCVC740, or
+  the Askey VC010. The PCA635, PCVC665 and PCVC720 are not supported
+  by this driver and never will be.
+
+  This driver has an optional plugin, which is distributed as a binary
+  module only.  It contains code that allow you to use higher
+  resolutions and framerates but may not be distributed as source.
+  But even without this plugin you can these cams for most
+  applications.
+
+  See <file:Documentation/usb/philips.txt> for more information and
+  installation instructions.
+
+  The built-in microphone is enabled by selecting USB Audio support.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Character Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pwc.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SE401
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. See <file:Documentation/usb/se401.txt> for more
+  information and for a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called se401.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_STV680
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. This includes the Pencam line of cameras.
+  See <file:Documentation/usb/stv680.txt> for more information and for
+  a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called stv680.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_VICAM
+  Say Y here if you have 3com homeconnect camera (vicam).
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called vicam.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PEGASUS
+  Say Y here if you know you have Pegasus or Pegasus II based adapter.
+  If in doubt then look at linux/drivers/usb/pegasus.h for the complete
+  list of supported devices.
+  If your particular adapter is not in the list and you are _sure_ it
+  is Pegasus or Pegasus II based then send me (pmanolov@lnxw.com) vendor
+  and device IDs.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pegasus.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_KAWETH
+  Say Y here if you want to use one of the following 10Mbps only
+  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
+       3Com 3C19250
+       ADS USB-10BT
+       ATEN USB Ethernet
+       ASANTE USB To Ethernet Adapter
+       AOX Endpoints USB Ethernet
+       Correga K.K.
+       D-Link DSB-650C and DU-E10
+       Entrega / Portgear E45
+       I-O DATA USB-ET/T
+       Jaton USB Ethernet Device Adapter
+       Kingston Technology USB Ethernet Adapter
+       Linksys USB10T
+       Mobility USB-Ethernet Adapter
+       NetGear EA-101
+       Peracom Enet and Enet2
+       Portsmith Express Ethernet Adapter
+       Shark Pocket Adapter
+       SMC 2202USB
+       Sony Vaio port extender
+
+  This driver is likely to work with most 10Mbps only USB Ethernet
+  adapters, including some "no brand" devices. It does NOT work on
+  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
+  the CATC NetMate driver for those. If you are not sure which one
+  you need, select both, and the correct one should be selected for
+  you.
+
+  This driver makes the adapter appear as a normal Ethernet interface,
+  typically on eth0, if it is the only ethernet device, or perhaps on
+  eth1, if you have a PCI or ISA ethernet card installed.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called kaweth.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_CATC
+  Say Y if you want to use one of the following 10Mbps USB Ethernet
+  device based on the EL1210A chip. Supported devices are:
+    Belkin F5U111
+    CATC NetMate
+    CATC NetMate II
+    smartBridges smartNIC
+
+  This driver makes the adapter appear as a normal Ethernet interface,
+  typically on eth0, if it is the only ethernet device, or perhaps on
+  eth1, if you have a PCI or ISA ethernet card installed.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called catc.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_DC2XX
+  Say Y here if you want to connect this type of still camera to your
+  computer's USB port.  See <file:Documentation/usb/dc2xx.txt> for
+  more information; some non-Kodak cameras may also work with this
+  driver, given application support (such as <http://www.gphoto.org/>).
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dc2xx.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_MDC800
+  Say Y here if you want to connect this type of still camera to
+  your computer's USB port. This driver can be used with gphoto 0.4.3
+  and higher (look at <http://www.gphoto.org/>).
+  To use it create a device node with "mknod /dev/mustek c 180 32" and
+  configure it in your software.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mdc800.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_STORAGE
+  Say Y here if you want to connect USB mass storage devices to your
+  computer's USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usb-storage.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_STORAGE_DEBUG
+  Say Y here in order to have the USB Mass Storage code generate
+  verbose debugging messages.
+
+CONFIG_USB_STORAGE_ISD200
+  Say Y here if you want to use USB Mass Store devices based
+  on the In-Systems Design ISD-200 USB/ATA bridge.
+
+  Some of the products that use this chip are:
+
+    - Archos Jukebox 6000
+    - ISD SmartCable for Storage
+    - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
+    - Sony CRX10U CD-R/RW drive
+    - CyQ've CQ8060A CDRW drive
+    - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
+
+CONFIG_USB_USS720
+  This driver is for USB parallel port adapters that use the Lucent
+  Technologies USS-720 chip. These cables are plugged into your USB
+  port and provide USB compatibility to peripherals designed with
+  parallel port interfaces.
+
+  The chip has two modes: automatic mode and manual mode. In automatic
+  mode, it looks to the computer like a standard USB printer. Only
+  printers may be connected to the USS-720 in this mode. The generic
+  USB printer driver ("USB Printer support", above) may be used in
+  that mode, and you can say N here if you want to use the chip only
+  in this mode.
+
+  Manual mode is not limited to printers, any parallel port
+  device should work. This driver utilizes manual mode.
+  Note however that some operations are three orders of magnitude
+  slower than on a PCI/ISA Parallel Port, so timing critical
+  applications might not work.
+
+  Say Y here if you own an USS-720 USB->Parport cable and intend to
+  connect anything other than a printer to it.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called uss720.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_DEVICEFS
+  If you say Y here (and to "/proc file system support" in the "File
+  systems section, above), you will get a file /proc/bus/usb/devices
+  which lists the devices currently connected to your USB bus or
+  busses, a file /proc/bus/usb/drivers which lists the USB kernel
+  client drivers currently loaded, and for every connected device a
+  file named  "/proc/bus/usb/xxx/yyy", where xxx is the bus number and
+  yyy the device number; the latter files can be used by user space
+  programs to talk directly to the device. These files are "virtual",
+  meaning they are generated on the fly and not stored on the hard
+  drive.
+
+  You may need to mount the usbdevfs file system to see the files, use
+   mount -t usbdevfs none /proc/bus/usb
+
+  For the format of the various /proc/bus/usb/ files, please read
+  <file:Documentation/usb/proc_usb_info.txt>.
+
+  Please note that this code is completely unrelated to devfs, the
+  "/dev file system support".
+
+  Most users want to say Y here.
+
+CONFIG_USB_BANDWIDTH
+  If you say Y here, the USB subsystem enforces USB bandwidth
+  allocation and will prevent some device opens from succeeding
+  if they would cause USB bandwidth usage to go above 90% of
+  the bus bandwidth.
+
+  If you say N here, these conditions will cause warning messages
+  about USB bandwidth usage to be logged and some devices or
+  drivers may not work correctly.
+
+CONFIG_USB_DABUSB
+  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
+  brought to you by the DAB-Team (<http://dab.in.tum.de/>).  This
+  driver can be taken as an example for URB-based bulk, control, and
+  isochronous transactions. URB's are explained in
+  <file:Documentation/usb/URB.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dabusb.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_USBNET
+  This driver supports network links over USB with USB "Network"
+  or "data transfer" cables, often used to network laptops to PCs.
+  Such cables have chips from suppliers such as Belkin/eTEK, GeneSys
+  (GeneLink), NetChip and Prolific. Intelligent USB devices could also
+  use this approach to provide Internet access, using standard USB
+  cabling. You can find these chips also on some motherboards with
+  USB PC2PC support.
+
+  These links will have names like "usb0", "usb1", etc.  They act
+  like two-node Ethernets, so you can use 802.1d Ethernet Bridging
+  (CONFIG_BRIDGE) to simplify your network routing.
+
+  This code is also available as a kernel module (code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbnet.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_STORAGE_FREECOM
+  Support for the Freecom USB to IDE/ATAPI adaptor.
+  Freecom has a web page at <http://www.freecom.de/>.
+
+CONFIG_USB_STORAGE_DPCM
+  Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia
+  reader, details at <http://www.microtechint.com/zio/index.html>.
+  This driver treats the flash card as a removable storage device.
+
+CONFIG_USB_STORAGE_SDDR09
+  Say Y here to include additional code to support the Sandisk SDDR-09
+  SmartMedia reader in the USB Mass Storage driver.
+
+CONFIG_USB_RIO500
+  Say Y here if you want to connect a USB Rio500 mp3 player to your
+  computer's USB port. Please read <file:Documentation/usb/rio.txt>
+  for more information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rio500.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_AUERSWALD
+  Say Y here if you want to connect an Auerswald USB ISDN Device
+  to your computer's USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called auerswald.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_DSBR
+  Say Y here if you want to connect this type of radio to your
+  computer's USB port. Note that the audio is not digital, and
+  you must connect the line out connector to a sound card or a
+  set of speakers.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dsbr100.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_MICROTEK
+  Say Y here if you want support for the Microtek X6USB and
+  possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
+  Support for anything but the X6 is experimental.
+  Please report failures and successes.
+  The scanner will appear as a scsi generic device to the rest
+  of the system. Scsi support is required for this driver to compile
+  and work. SANE 1.0.4 or newer is needed to make use of your scanner.
+  This driver can be compiled as a module.
+
+CONFIG_USB_HPUSBSCSI
+  Say Y here if you want support for the HP 53xx series of scanners
+  and the Minolta Scan Dual. This driver is experimental.
+  The scanner will be accessible as a SCSI device.
+
+CONFIG_USB_BLUETOOTH
+  Say Y here if you want to connect a USB Bluetooth device to your
+  computer's USB port. You will need the Bluetooth stack (available
+  at <http://developer.axis.com/software/index.shtml>) to fully use
+  the device.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called bluetooth.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/usb/hcd/Config.help linux/drivers/usb/hcd/Config.help
--- linux-2.5.3-pre4/drivers/usb/hcd/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/usb/hcd/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,23 @@
+CONFIG_USB_EHCI_HCD
+  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+  If your USB host controller supports USB 2.0, you will likely want to
+  configure this Host Controller Driver.  At this writing, the primary
+  implementation of EHCI is a chip from NEC, widely available in add-on
+  PCI cards, but implementations are in the works from other vendors
+  including Intel and Philips.  Motherboard support is appearing.
+
+  EHCI controllers are packaged with "companion" host controllers (OHCI
+  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
+  will connect to EHCI if it the device is high speed, otherwise they
+  connect to a companion controller.  If you configure EHCI, you should
+  probably configure the OHCI (for NEC and some other vendors) USB Host
+  Controller Driver too.
+
+  You may want to read <file:Documentation/usb/ehci.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ehci-hcd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/drivers/usb/serial/Config.help linux/drivers/usb/serial/Config.help
--- linux-2.5.3-pre4/drivers/usb/serial/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/usb/serial/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,268 @@
+CONFIG_USB_SERIAL
+  Say Y here if you have a USB device that provides normal serial
+  ports, or acts like a serial device, and you want to connect it to
+  your USB bus.
+
+  Please read <file:Documentation/usb/usb-serial.txt> for more
+  information on the specifics of the different devices that are
+  supported, and on how to use them.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbserial.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_GENERIC
+  Say Y here if you want to use the generic USB serial driver.  Please
+  read <file:Documentation/usb/usb-serial.txt> for more information on
+  using this driver.  It is recommended that the "USB Serial converter
+  support" be compiled as a module for this driver to be used
+  properly.
+
+CONFIG_USB_SERIAL_WHITEHEAT
+  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
+  USB to serial converter device.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called whiteheat.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_VISOR
+  Say Y here if you want to connect to your HandSpring Visor, Palm
+  m500 or m505 through its USB docking station. See
+  <http://usbvisor.sourceforge.net/> for more information on using this
+  driver.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called visor.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_IPAQ
+  Say Y here if you want to connect to your Compaq iPAQ running
+  Windows CE 3.0 using a USB autosync cable. For information on using
+  the driver, read <file:Documentation/usb/usb-serial.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ipaq.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_IR
+  Say Y here if you want to enable simple serial support for USB IrDA
+  devices.  This is useful if you do not want to use the full IrDA
+  stack.
+  
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ir-usb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_IR
+  Say Y here if you want to enable simple serial support for USB IrDA
+  devices.  This is useful if you do not want to use the full IrDA
+  stack.
+  
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ir-usb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_BELKIN
+  Say Y here if you want to use a Belkin USB Serial single port
+  adaptor (F5U103 is one of the model numbers) or the Peracom single
+  port USB to serial adapter.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called belkin_sa.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_FTDI_SIO
+  Say Y here if you want to use a FTDI SIO single port USB to serial
+  converter device. The implementation I have is called the USC-1000.
+  This driver has also be tested with the 245 and 232 devices.
+
+  See <http://ftdi-usb-sio.sourceforge.net/> for more
+  information on this driver and the device.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ftdi_sio.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_KEYSPAN_PDA
+  Say Y here if you want to use a Keyspan PDA single port USB to
+  serial converter device.  This driver makes use of firmware
+  developed from scratch by Brian Warner.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called keyspan_pda.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_XIRCOM
+  Say Y here if you want to use a Xircom or Entregra single port USB to
+  serial converter device.  This driver makes use of firmware
+  developed from scratch by Brian Warner.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called keyspan_pda.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_KEYSPAN
+  Say Y here if you want to use Keyspan USB to serial converter
+  devices.  This driver makes use of Keyspan's official firmware
+  and was developed with their support.  You must also include
+  firmware to support your particular device(s).
+
+  See <http://misc.nu/hugh/keyspan.html> for more information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called keyspan.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA28
+  Say Y here to include firmware for the USA-28 converter.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA28X
+  Say Y here to include firmware for the USA-28X converter.
+  Be sure you have a USA-28X, there are also 28XA and 28XB
+  models, the label underneath has the actual part number.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA
+  Say Y here to include firmware for the USA-28XA converter.
+  Be sure you have a USA-28XA, there are also 28X and 28XB
+  models, the label underneath has the actual part number.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB
+  Say Y here to include firmware for the USA-28XB converter.
+  Be sure you have a USA-28XB, there are also 28X and 28XA
+  models, the label underneath has the actual part number.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA19
+  Say Y here to include firmware for the USA-19 converter.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA18X
+  Say Y here to include firmware for the USA-18X converter.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA19W
+  Say Y here to include firmware for the USA-19W converter.
+
+CONFIG_USB_SERIAL_KEYSPAN_USA49W
+  Say Y here to include firmware for the USA-49W converter.
+
+CONFIG_USB_SERIAL_OMNINET
+  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called omninet.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT
+  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
+  2 port (plus parallel port) and 4 port USB serial converters.  The
+  parallel port on the USB 2 appears as a third serial port on Linux.
+  The Digi Acceleport USB 8 is not yet supported by this driver.
+
+  This driver works under SMP with the usb-uhci driver.  It does not
+  work under SMP with the uhci driver.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called digi_acceleport.o.  If you want to compile
+  it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_EMPEG
+  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
+  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
+  device node.  See <file:Documentation/usb/usb-serial.txt> for more
+  tidbits of information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called empeg.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_MCT_U232
+  Say Y here if you want to use a USB Serial single port adapter from
+  Magic Control Technology Corp. (U232 is one of the model numbers).
+
+  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
+  BAY devices.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mct_u232.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_PL2303
+  Say Y here if you want to use the PL2303 USB Serial single port
+  adapter from Prolific.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pl2303.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_CYBERJACK
+  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
+  reader. This is an interface to ISO 7816 compatible contactbased
+  chipcards, e.g. GSM SIMs.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cyberjack.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_USB_SERIAL_EDGEPORT
+  Say Y here if you want to use any of the following devices from
+  Inside Out Networks (Digi):
+       Edgeport/4
+       Rapidport/4
+       Edgeport/4t
+       Edgeport/2
+       Edgeport/4i
+       Edgeport/2i
+       Edgeport/421
+       Edgeport/21
+       Edgeport/8
+       Edgeport/8 Dual
+       Edgeport/2D8
+       Edgeport/4D8
+       Edgeport/8i
+       Edgeport/2 DIN
+       Edgeport/4 DIN
+       Edgeport/16 Dual
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called io_edgeport.o.  If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_KLSI
+  Say Y here if you want to use a KL5KUSB105 - based single port
+  serial adapter. The most widely known -- and currently the only
+  tested -- device in this category is the PalmConnect USB Serial
+  adapter sold by Palm Inc. for use with their Palm III and Palm V
+  series PDAs.
+
+  Please read <file:Documentation/usb/usb-serial.txt> for more
+  information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called kl5kusb105.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SERIAL_DEBUG
+  Say Y here if you want verbose debug messages from the USB Serial
+  Drivers sent to the kernel debug log.
+
diff -urN linux-2.5.3-pre4/drivers/video/Config.help linux/drivers/video/Config.help
--- linux-2.5.3-pre4/drivers/video/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/video/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,702 @@
+CONFIG_FB_SGIVW
+  SGI Visual Workstation support for framebuffer graphics.
+
+CONFIG_VIDEO_SELECT
+  This enables support for text mode selection on kernel startup. If
+  you want to take advantage of some high-resolution text mode your
+  card's BIOS offers, but the traditional Linux utilities like
+  SVGATextMode don't, you can say Y here and set the mode using the
+  "vga=" option from your boot loader (lilo or loadlin) or set
+  "vga=ask" which brings up a video mode menu on kernel startup. (Try
+  "man bootparam" or see the documentation of your boot loader about
+  how to pass options to the kernel.)
+
+  Read the file <file:Documentation/svga.txt> for more information
+  about the Video mode selection support. If unsure, say N.
+
+CONFIG_FB
+  The frame buffer device provides an abstraction for the graphics
+  hardware. It represents the frame buffer of some video hardware and
+  allows application software to access the graphics hardware through
+  a well-defined interface, so the software doesn't need to know
+  anything about the low-level (hardware register) stuff.
+
+  Frame buffer devices work identically across the different
+  architectures supported by Linux and make the implementation of
+  application programs easier and more portable; at this point, an X
+  server exists which uses the frame buffer device exclusively.
+  On several non-X86 architectures, the frame buffer device is the
+  only way to use the graphics hardware.
+
+  The device is accessed through special device nodes, usually located
+  in the /dev directory, i.e. /dev/fb*.
+
+  You need an utility program called fbset to make full use of frame
+  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+  and the Framebuffer-HOWTO at
+  <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+  information.
+
+  Say Y here and to the driver for your graphics board below if you
+  are compiling a kernel for a non-x86 architecture.
+
+  If you are compiling for the x86 architecture, you can say Y if you
+  want to play with it, but it is not essential. Please note that
+  running graphical applications that directly touch the hardware
+  (e.g. an accelerated X server) and that are not frame buffer
+  device-aware may cause unexpected results. If unsure, say N.
+
+CONFIG_FB_ACORN
+  This is the frame buffer device driver for the Acorn VIDC graphics
+  hardware found in Acorn RISC PCs and other ARM-based machines.  If
+  unsure, say N.
+
+CONFIG_FB_PM2
+  This is the frame buffer device driver for the Permedia2 AGP frame
+  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
+  product page at
+  <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+
+CONFIG_FB_PM2_FIFO_DISCONNECT
+  Support the Permedia2 FIFOI disconnect feature (see CONFIG_FB_PM2).
+
+CONFIG_FB_PM2_PCI
+  Say Y to enable support for Permedia2 AGP frame buffer card from
+  3Dlabs (aka `Graphic Blaster Exxtreme') on the PCI bus.
+
+CONFIG_FB_PM2_CVPPC
+  Say Y to enable support for the Amiga Phase 5 CVisionPPC BVisionPPC
+  framebuffer cards.  Phase 5 is no longer with us, alas.
+
+CONFIG_FB_AMIGA
+  This is the frame buffer device driver for the builtin graphics
+  chipset found in Amigas.
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called amifb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_FB_AMIGA_OCS
+  This enables support for the original Agnus and Denise video chips,
+  found in the Amiga 1000 and most A500's and A2000's. If you intend
+  to run Linux on any of these systems, say Y; otherwise say N.
+
+CONFIG_FB_AMIGA_ECS
+  This enables support for the Enhanced Chip Set, found in later
+  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+  you intend to run Linux on any of these systems, say Y; otherwise
+  say N.
+
+CONFIG_FB_AMIGA_AGA
+  This enables support for the Advanced Graphics Architecture (also
+  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+  and CD32. If you intend to run Linux on any of these systems, say Y;
+  otherwise say N.
+
+CONFIG_FB_CYBER
+  This enables support for the Cybervision 64 graphics card from
+  Phase5. Please note that its use is not all that intuitive (i.e. if
+  you have any questions, be sure to ask!). Say N unless you have a
+  Cybervision 64 or plan to get one before you next recompile the
+  kernel. Please note that this driver DOES NOT support the
+  Cybervision 64 3D card, as they use incompatible video chips.
+
+CONFIG_FB_CYBER2000
+  This enables support for the Integraphics CyberPro 20x0 and 5000
+  VGA chips used in the Rebel.com Netwinder and other machines.
+  Say Y if you have a NetWinder or a graphics card containing this
+  device, otherwise say N.
+
+CONFIG_FB_VIRGE
+  This enables support for the Cybervision 64/3D graphics card from
+  Phase5. Please note that its use is not all that intuitive (i.e. if
+  you have any questions, be sure to ask!). Say N unless you have a
+  Cybervision 64/3D or plan to get one before you next recompile the
+  kernel. Please note that this driver DOES NOT support the older
+  Cybervision 64 card, as they use incompatible video chips.
+
+CONFIG_FB_RETINAZ3
+  This enables support for the Retina Z3 graphics card. Say N unless
+  you have a Retina Z3 or plan to get one before you next recompile
+  the kernel.
+
+CONFIG_FB_CLGEN
+  This enables support for Cirrus Logic GD542x/543x based boards on
+  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+  If you have a PCI-based system, this enables support for these
+  chips: GD-543x, GD-544x, GD-5480.
+
+  Please read the file <file:Documentation/fb/clgenfb.txt>.
+
+  Say N unless you have such a graphics board or plan to get one
+  before you next recompile the kernel.
+
+CONFIG_FB_ATARI
+  This is the frame buffer device driver for the builtin graphics
+  chipset found in Ataris.
+
+CONFIG_FB_FM2
+  This is the frame buffer device driver for the Amiga FrameMaster
+  card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+CONFIG_FB_OF
+  Say Y if you want support with Open Firmware for your graphics
+  board.
+
+CONFIG_FB_S3TRIO
+  If you have a S3 Trio say Y. Say N for S3 Virge.
+
+CONFIG_FB_3DFX
+  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
+  chips. Say Y if you have such a graphics board.
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called tdfxfb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_FB_RIVA
+  This driver supports graphics boards with the nVidia Riva/Geforce
+  chips.
+  Say Y if you have such a graphics board.
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called rivafb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_FB_ATY
+  This driver supports graphics boards with the ATI Mach64 chips.
+  Say Y if you have such a graphics board.
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called atyfb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_FB_ATY128
+  This driver supports graphics boards with the ATI Rage128 chips.
+  Say Y if you have such a graphics board and read
+  <file:Documentation/fb/aty128fb.txt>.
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called aty128fb.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_FB_MAXINE
+  Say Y here to directly support the on-board framebuffer in the
+  Maxine (5000/20, /25, /33) version of the DECstation.  There is a
+  page dedicated to Linux on DECstations at <http://decstation.unix-ag.org/>.
+
+CONFIG_FB_PMAG_BA
+  Say Y here to directly support the on-board PMAG-BA framebuffer in
+  the 5000/1xx versions of the DECstation.  There is a page dedicated
+  to Linux on DECstations at <http://decstation.unix-ag.org/>.
+
+CONFIG_FB_PMAGB_B
+  Say Y here to directly support the on-board PMAGB-B framebuffer in
+  the 5000/1xx versions of the DECstation.  There is a page dedicated
+  to Linux on DECstations at <http://decstation.unix-ag.org/>.
+
+CONFIG_FB_NEOMAGIC
+  This driver supports notebooks with NeoMagic PCI chips.
+  Say Y if you have such a graphics card. 
+
+  The driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called neofb.o. If you want to compile it as a
+  module, say M here and read Documentation/modules.txt.
+
+CONFIG_FB_CONTROL
+  This driver supports a frame buffer for the graphics adapter in the
+  Power Macintosh 7300 and others.
+
+CONFIG_FB_PLATINUM
+  This driver supports a frame buffer for the "platinum" graphics
+  adapter in some Power Macintoshes.
+
+CONFIG_FB_VALKYRIE
+  This driver supports a frame buffer for the "valkyrie" graphics
+  adapter in some Power Macintoshes.
+
+CONFIG_FB_CT65550
+  This is the frame buffer device driver for the Chips & Technologies
+  65550 graphics chip in PowerBooks.
+
+CONFIG_FB_TGA
+  This is the frame buffer device driver for generic TGA graphic
+  cards. Say Y if you have one of those.
+
+CONFIG_FB_VESA
+  This is the frame buffer device driver for generic VESA 2.0
+  compliant graphic cards. The older VESA 1.2 cards are not supported.
+  You will get a boot time penguin logo at no additional cost. Please
+  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+CONFIG_FBCON_VGA_PLANES
+  This low level frame buffer console driver enable the kernel to use
+  the 16-color planar modes of the old VGA cards where the bits of
+  each pixel are separated into 4 planes.
+
+  Only answer Y here if you have a (very old) VGA card that isn't VESA
+  2 compatible.
+
+CONFIG_FB_VGA16
+  This is the frame buffer device driver for VGA 16 color graphic
+  cards. Say Y if you have such a card.
+
+  This code is also available as a module. If you want to compile it
+  as a module ( = code which can be inserted in and removed from the
+  running kernel whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called
+  vga16fb.o.
+
+CONFIG_FB_STI
+  STI refers to the HP "Standard Text Interface" which is a set of
+  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+  Enabling this option will implement the linux framebuffer device and
+  an fbcon color text console using calls to the STI BIOS routines.
+  The HP framebuffer device is usually planar, uses a strange memory
+  layout, and changing the plane mask to create colored pixels
+  requires a call to the STI routines, so do not expect /dev/fb to
+  actually be useful.  However, it is the best we have as far as
+  graphics on the HP chipsets due to lack of hardware level
+  documentation for the various on-board HP chipsets used in these
+  systems.  It is sufficient for basic text console functions,
+  including fonts.
+
+  You should probably enable this option, unless you are having
+  trouble getting video when booting the kernel (make sure it isn't
+  just that you are running the console on the serial port, though).
+  Really old HP boxes may not have STI, and must use the PDC BIOS
+  console or the IODC BIOS.
+
+CONFIG_FBCON_FONTS
+  Say Y here if you would like to use fonts other than the default
+  your frame buffer console usually use.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about foreign fonts.
+
+  If unsure, say N (the default choices are safe).
+
+CONFIG_FONT_8x16
+  This is the "high resolution" font for the VGA frame buffer (the one
+  provided by the VGA text console 80x25 mode.
+
+  If unsure, say Y.
+
+CONFIG_FBCON_FONTWIDTH8_ONLY
+  Answer Y here will make the kernel provide only the 8x8 fonts (these
+  are the less readable).
+
+  If unsure, say N.
+
+CONFIG_FONT_SUN8x16
+  This is the high resolution console font for Sun machines. Say Y.
+
+CONFIG_FONT_SUN12x22
+  This is the high resolution console font for Sun machines with very
+  big letters (like the letters used in the SPARC PROM). If the
+  standard font is unreadable for you, say Y, otherwise say N.
+
+CONFIG_FONT_8x8
+  This is the "high resolution" font for the VGA frame buffer (the one
+  provided by the text console 80x50 (and higher) modes).
+
+  Note that this is a poor quality font. The VGA 8x16 font is quite a
+  lot more readable.
+
+  Given the resolution provided by the frame buffer device, answer N
+  here is safe.
+
+CONFIG_FONT_6x11
+  Small console font with Macintosh-style high-half glyphs.  Some Mac
+  framebuffer drivers don't support this one at all.
+
+CONFIG_FONT_PEARL_8x8
+  Small console font with PC-style control-character and high-half
+  glyphs.
+
+CONFIG_FONT_ACORN_8x8
+  Small console font with PC-style control characters and high-half
+  glyphs.
+
+CONFIG_FB_HGA
+  Say Y here if you have a Hercules mono graphics card.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called hgafb.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  As this card technology is 15 years old, most people will answer N
+  here.
+
+CONFIG_FB_E1355
+  Build in support for the SED1355 Epson Research Embedded RAMDAC
+  LCD/CRT Controller (since redesignated as the S1D13505) as a
+  framebuffer.  Product specs at
+  <http://www.erd.epson.com/vdc/html/products.htm>.
+
+CONFIG_E1355_REG_BASE
+  Epson SED1355/S1D13505 LCD/CRT controller register base address.
+  See the manuals at
+  <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
+  discussion.
+
+CONFIG_E1355_FB_BASE
+  Epson SED1355/S1D13505 LCD/CRT controller memory base address.  See
+  the manuals at
+  <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
+  discussion.
+
+CONFIG_FB_PVR2
+  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
+  run linux on your Dreamcast, you will have to say Y here.
+  This driver may or may not work on other PowerVR 2 cards, but is
+  totally untested.  Use at your own risk.  If unsure, say N.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called pvr2fb.o.  If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  You can pass several parameters to the driver at boot time or at
+  module load time.  The parameters look like "video=pvr2:XXX", where
+  the meaning of XXX can be found at the end of the main source file
+  (<file:drivers/video/pvr2fb.c>). Please see the file
+  <file:Documentation/fb/pvr2fb.txt>.
+
+CONFIG_FB_PVR2_DEBUG
+  Say Y here if you wish for the pvr2fb driver to print out debugging
+  messages. Most people will want to say N here. If unsure, you will
+  also want to say N.
+
+CONFIG_FB_MATROX
+  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+  Matrox G400 or G450 card in your box. At this time, support for the
+  G100 is untested and support for G450 is highly experimental.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want).
+  The module will be called matroxfb.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  You can pass several parameters to the driver at boot time or at
+  module load time. The parameters look like "video=matrox:XXX", and
+  are described in <file:Documentation/fb/matroxfb.txt>.
+
+CONFIG_FB_MATROX_MILLENIUM
+  Say Y here if you have a Matrox Millennium or Matrox Millennium II
+  video card. If you select "Advanced lowlevel driver options" below,
+  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+  also use font widths different from 8.
+
+CONFIG_FB_MATROX_MYSTIQUE
+  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+  video card. If you select "Advanced lowlevel driver options" below,
+  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+  packed pixel and 32 bpp packed pixel. You can also use font widths
+  different from 8.
+
+CONFIG_FB_MATROX_G100
+  Say Y here if you have a Matrox G100, G200, G400 or G450 based
+  video card. If you select "Advanced lowlevel driver options", you
+  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+  pixel and 32 bpp packed pixel. You can also use font widths
+  different from 8.
+
+  If you need support for G400 secondary head, you must first say Y to
+  "I2C support" and "I2C bit-banging support" in the character devices
+  section, and then to "Matrox I2C support" and "G400 second head
+  support" here in the framebuffer section.
+
+CONFIG_FB_MATROX_I2C
+  This drivers creates I2C buses which are needed for accessing the
+  DDC (I2C) bus present on all Matroxes, an I2C bus which
+  interconnects Matrox optional devices, like MGA-TVO on G200 and
+  G400, and the secondary head DDC bus, present on G400 only.
+
+  You can say Y or M here if you want to experiment with monitor
+  detection code. You must say Y or M here if you want to use either
+  second head of G400 or MGA-TVO on G200 or G400.
+
+  If you compile it as module, it will create a module named
+  i2c-matroxfb.o.
+
+CONFIG_FB_MATROX_MAVEN
+  WARNING !!! This support does not work with G450 !!!
+
+  Say Y or M here if you want to use a secondary head (meaning two
+  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+  head is not compatible with accelerated XFree 3.3.x SVGA servers -
+  secondary head output is blanked while you are in X. With XFree
+  3.9.17 preview you can use both heads if you use SVGA over fbdev or
+  the fbdev driver on first head and the fbdev driver on second head.
+
+  If you compile it as module, two modules are created,
+  matroxfb_crtc2.o and matroxfb_maven.o. Matroxfb_maven is needed for
+  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+  also load i2c-matroxfb to get it to run.
+
+  The driver starts in monitor mode and you must use the matroxset
+  tool (available at
+  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+  PAL or NTSC or to swap primary and secondary head outputs.
+  Secondary head driver also always start in 640x480 resolution, you
+  must use fbset to change it.
+
+  Also do not forget that second head supports only 16 and 32 bpp
+  packed pixels, so it is a good idea to compile them into the kernel
+  too.  You can use only some font widths, as the driver uses generic
+  painting procedures (the secondary head does not use acceleration
+  engine).
+
+CONFIG_FB_MATROX_G450
+  Say Y or M here if you want to use a secondary head (meaning two
+  monitors in parallel) on G450.
+
+  If you compile it as module, two modules are created,
+  matroxfb_crtc2.o and matroxfb_g450.o. Both modules are needed if you
+  want two independent display devices.
+
+  The driver starts in monitor mode and currently does not support
+  output in TV modes.  You must use the matroxset tool (available
+  at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to swap
+  primary and secondary head outputs.  Secondary head driver always
+  start in 640x480 resolution and you must use fbset to change it.
+
+  Also do not forget that second head supports only 16 and 32 bpp
+  packed pixels, so it is a good idea to compile them into the kernel
+  too. You can use only some font widths, as the driver uses generic
+  painting procedures (the secondary head does not use acceleration
+  engine).
+
+CONFIG_FB_MATROX_MULTIHEAD
+  Say Y here if you have more than one (supported) Matrox device in
+  your computer and you want to use all of them for different monitors
+  ("multihead"). If you have only one device, you should say N because
+  the driver compiled with Y is larger and a bit slower, especially on
+  ia32 (ix86).
+
+  If you said M to "Matrox unified accelerated driver" and N here, you
+  will still be able to use several Matrox devices simultaneously:
+  insert several instances of the module matroxfb.o into the kernel
+  with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
+  for the different Matrox devices. This method is slightly faster but
+  uses 40 KB of kernel memory per Matrox card.
+
+  There is no need for enabling 'Matrox multihead support' if you have
+  only one Matrox card in the box.
+
+CONFIG_FB_VOODOO1
+  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
+  Voodoo2 (cvg) based graphics card.
+
+  This driver is also available as a module ( = code which can be 
+  inserted and removed from the running kernel whenever you want).
+  The module will be called sstfb.o. If you want to compile it as
+  a module, say M here and read Documentation/modules.txt.
+
+  WARNING: Do not use any application that uses the 3D engine
+  (namely glide) while using this driver.
+  Please read the file Documentation/fb/README-sstfb.txt for supported
+  options and other important info  support.
+
+CONFIG_FB_SBUS
+  Say Y if you want support for SBUS or UPA based frame buffer device.
+
+CONFIG_FB_CREATOR
+  This is the frame buffer device driver for the Creator and Creator3D
+  graphics boards.
+
+CONFIG_FB_CGSIX
+  This is the frame buffer device driver for the CGsix (GX, TurboGX)
+  frame buffer.
+
+CONFIG_FB_BWTWO
+  This is the frame buffer device driver for the BWtwo frame buffer.
+
+CONFIG_FB_CGTHREE
+  This is the frame buffer device driver for the CGthree frame buffer.
+
+CONFIG_FB_CGFOURTEEN
+  This is the frame buffer device driver for the CGfourteen frame
+  buffer on Desktop SPARCsystems with the SX graphics option.
+
+CONFIG_FB_P9100
+  This is the frame buffer device driver for the P9100 card
+  supported on Sparcbook 3 machines.
+
+CONFIG_FB_LEO
+  This is the frame buffer device driver for the SBUS-based Sun ZX
+  (leo) frame buffer cards.
+
+CONFIG_FB_IGA
+  This is the framebuffer device for the INTERGRAPHICS 1680 and
+  successor frame buffer cards.
+
+CONFIG_FB_TCX
+  This is the frame buffer device driver for the TCX 24/8bit frame
+  buffer.
+
+CONFIG_FB_HIT
+  This is the frame buffer device driver for the Hitachi HD64461 LCD
+  frame buffer card.
+
+CONFIG_FB_SIS
+  This is the frame buffer device driver for the SiS 630 and 640 Super
+  Socket 7 UMA cards.  Specs available at <http://www.sis.com.tw/>.
+
+CONFIG_FB_SIS_300
+  This is the frame buffer device driver for the SiS 630 and related
+  Super Socket 7 UMA cards.  Specs available at
+  <http://www.sis.com.tw/>.
+
+CONFIG_FB_SIS_315
+  This is the frame buffer device driver for the SiS 315 graphics
+  card.  Specs available at <http://www.sis.com.tw/>.
+
+CONFIG_FB_IMSTT
+  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+  many Macintosh and compatible computers.
+
+CONFIG_FB_VIRTUAL
+  This is a `virtual' frame buffer device. It operates on a chunk of
+  unswappable kernel memory instead of on the memory of a graphics
+  board. This means you cannot see any output sent to this frame
+  buffer device, while it does consume precious memory. The main use
+  of this frame buffer device is testing and debugging the frame
+  buffer subsystem. Do NOT enable it for normal systems! To protect
+  the innocent, it has to be enabled explicitly at boot time using the
+  kernel option `video=vfb:'.
+
+  This driver is also available as a module ( = code which can be
+  inserted and removed from the running kernel whenever you want). The
+  module will be called vfb.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_FB_ATY_CT
+  Say Y here to support use of ATI's 64-bit Rage boards (or other
+  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+  framebuffer device.  The ATI product support page for these boards
+  is at <http://support.ati.com/products/pc/mach64/>.
+
+CONFIG_FB_ATY_GX
+  Say Y here to support use of the ATI Mach64 Graphics Expression
+  board (or other boards based on the Mach64 GX chipset) as a
+  framebuffer device.  The ATI product support page for these boards
+  is at
+  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+CONFIG_FB_RADEON
+  Choose this option if you want to use an ATI Radeon graphics card as
+  a framebuffer device.  There are both PCI and AGP versions.  You
+  don't need to choose this to run the Radeon in plain VGA mode.
+  There is a product page at
+  <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
+
+CONFIG_FB_SA1100
+  This is a framebuffer device for the SA-1100 LCD Controller.
+  See <http://www.linux-fbdev.org/> for information on framebuffer
+  devices.
+
+  If you plan to use the LCD display with your SA-1100 system, say
+  Y here.
+
+CONFIG_FBCON_ADVANCED
+  The frame buffer console uses character drawing routines that are
+  tailored to the specific organization of pixels in the memory of
+  your graphics hardware. These are called the low level frame buffer
+  console drivers. Note that they are used for text console output
+  only; they are NOT needed for graphical applications.
+
+  If you say N here, the needed low level drivers are automatically
+  enabled, depending on what frame buffer devices you selected above.
+  This is recommended for most users.
+
+  If you say Y here, you have more fine-grained control over which low
+  level drivers are enabled. You can e.g. leave out low level drivers
+  for color depths you do not intend to use for text consoles.
+
+  Low level frame buffer console drivers can be modules ( = code which
+  can be inserted and removed from the running kernel whenever you
+  want). The modules will be called fbcon-*.o. If you want to compile
+  (some of) them as modules, read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_FBCON_MFB
+  This is the low level frame buffer console driver for monochrome
+  (2 colors) packed pixels.
+
+CONFIG_FBCON_CFB2
+  This is the low level frame buffer console driver for 2 bits per
+  pixel (4 colors) packed pixels.
+
+CONFIG_FBCON_CFB4
+  This is the low level frame buffer console driver for 4 bits per
+  pixel (16 colors) packed pixels.
+
+CONFIG_FBCON_CFB8
+  This is the low level frame buffer console driver for 8 bits per
+  pixel (256 colors) packed pixels.
+
+CONFIG_FBCON_CFB16
+  This is the low level frame buffer console driver for 15 or 16 bits
+  per pixel (32K or 64K colors, also known as `hicolor') packed
+  pixels.
+
+CONFIG_FBCON_CFB24
+  This is the low level frame buffer console driver for 24 bits per
+  pixel (16M colors, also known as `truecolor') packed pixels. It is
+  NOT for `sparse' 32 bits per pixel mode.
+
+CONFIG_FBCON_CFB32
+  This is the low level frame buffer console driver for 32 bits per
+  pixel (16M colors, also known as `truecolor') sparse packed pixels.
+
+CONFIG_FBCON_AFB
+  This is the low level frame buffer console driver for 1 to 8
+  bitplanes (2 to 256 colors) on Amiga.
+
+CONFIG_FBCON_ILBM
+  This is the low level frame buffer console driver for 1 to 8
+  interleaved bitplanes (2 to 256 colors) on Amiga.
+
+CONFIG_FBCON_IPLAN2P2
+  This is the low level frame buffer console driver for 2 interleaved
+  bitplanes (4 colors) on Atari.
+
+CONFIG_FBCON_IPLAN2P4
+  This is the low level frame buffer console driver for 4 interleaved
+  bitplanes (16 colors) on Atari.
+
+CONFIG_FBCON_IPLAN2P8
+  This is the low level frame buffer console driver for 8 interleaved
+  bitplanes (256 colors) on Atari.
+
+CONFIG_FBCON_MAC
+  This is the low level frame buffer console driver for 1/2/4/8/16/32
+  bits per pixel packed pixels on Mac. It supports variable font
+  widths for low resolution screens.
+
+CONFIG_FBCON_HGA
+  This is the low level frame buffer console driver for Hercules mono
+  graphics cards.
+
+CONFIG_FBCON_VGA
+  This is the low level frame buffer console driver for VGA text mode;
+  it is used by frame buffer device drivers that support VGA text
+  mode.
+
diff -urN linux-2.5.3-pre4/drivers/video/clgenfb.c linux/drivers/video/clgenfb.c
--- linux-2.5.3-pre4/drivers/video/clgenfb.c	Thu Jan 24 12:35:17 2002
+++ linux/drivers/video/clgenfb.c	Thu Jan 24 12:35:37 2002
@@ -413,6 +413,7 @@
 static struct clgenfb_info boards[MAX_NUM_BOARDS];	/* the boards */
 
 static unsigned clgen_def_mode = 1;
+static int noaccel = 0;
 
 static int release_io_ports = 0;
 
@@ -1405,7 +1406,9 @@
 			break;
 
 		case BT_PICASSO4:
+#ifdef CONFIG_ZORRO
 			vga_wseq (fb_info->regs, CL_SEQRF, 0xb8);	/* ### INCOMPLETE!! */
+#endif
 /*          vga_wseq (fb_info->regs, CL_SEQR1F, 0x1c); */
 			break;
 
@@ -2748,6 +2751,23 @@
 
 	DPRINTK ("clgen: (RAM start set to: 0x%p)\n", fb_info->fbmem);
 
+	if (noaccel)
+	{
+		printk("clgen: disabling text acceleration support\n");
+#ifdef FBCON_HAS_CFB8
+		fbcon_clgen_8.bmove = fbcon_cfb8_bmove;
+		fbcon_clgen_8.clear = fbcon_cfb8_clear;
+#endif
+#ifdef FBCON_HAS_CFB16
+		fbcon_clgen_16.bmove = fbcon_cfb16_bmove;
+		fbcon_clgen_16.clear = fbcon_cfb16_clear;
+#endif
+#ifdef FBCON_HAS_CFB32
+		fbcon_clgen_32.bmove = fbcon_cfb32_bmove;
+		fbcon_clgen_32.clear = fbcon_cfb32_clear;
+#endif
+	}
+
 	init_vgachip (fb_info);
 
 	/* set up a few more things, register framebuffer driver etc */
@@ -2851,6 +2871,8 @@
 			if (strcmp (this_opt, s) == 0)
 				clgen_def_mode = i;
 		}
+		if (!strcmp(this_opt, "noaccel"))
+			noaccel = 1;
 	}
 	return 0;
 }
diff -urN linux-2.5.3-pre4/drivers/zorro/Config.help linux/drivers/zorro/Config.help
--- linux-2.5.3-pre4/drivers/zorro/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/drivers/zorro/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,12 @@
+CONFIG_ZORRO_NAMES
+  By default, the kernel contains a database of all known Zorro device
+  names to make the information in /proc/iomem comprehensible to the
+  user. This database increases the size of the kernel image by about
+  15KB, but it gets freed after the system boots up, so it doesn't
+  take up kernel memory. Anyway, if you are building an installation
+  floppy or kernel for an embedded system where kernel image size
+  really matters, you can disable this feature and you'll get device
+  ID numbers instead of names.
+
+  When in doubt, say Y.
+
diff -urN linux-2.5.3-pre4/fs/Config.help linux/fs/Config.help
--- linux-2.5.3-pre4/fs/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/fs/Config.help	Thu Jan 24 12:35:37 2002
@@ -0,0 +1,1004 @@
+CONFIG_QUOTA
+  If you say Y here, you will be able to set per user limits for disk
+  usage (also called disk quotas). Currently, it works only for the
+  ext2 file system. You need additional software in order to use quota
+  support; for details, read the Quota mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. Probably the quota
+  support is only useful for multi user systems. If unsure, say N.
+
+CONFIG_MINIX_FS
+  Minix is a simple operating system used in many classes about OS's.
+  The minix file system (method to organize files on a hard disk
+  partition or a floppy disk) was the original file system for Linux,
+  but has been superseded by the second extended file system ext2fs.
+  You don't want to use the minix file system on your hard disk
+  because of certain built-in restrictions, but it is sometimes found
+  on older Linux floppy disks.  This option will enlarge your kernel
+  by about 28 KB. If unsure, say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>. The module
+  will be called minix.o.  Note that the file system of your root
+  partition (the one containing the directory /) cannot be compiled as
+  a module.
+
+CONFIG_REISERFS_FS
+  Stores not just filenames but the files themselves in a balanced
+  tree.  Uses journaling.
+
+  Balanced trees are more efficient than traditional file system
+  architectural foundations.
+
+  In general, ReiserFS is as fast as ext2, but is very efficient with
+  large directories and small files.  Additional patches are needed
+  for NFS and quotas, please see <http://www.reiserfs.org/> for links.
+
+  It is more easily extended to have features currently found in
+  database and keyword search systems than block allocation based file
+  systems are.  The next version will be so extended, and will support
+  plugins consistent with our motto ``It takes more than a license to
+  make source code open.''
+
+  Read <http://www.reiserfs.org/> to learn more about reiserfs.
+
+  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+  If you like it, you can pay us to add new features to it that you
+  need, buy a support contract, or pay us to port it to another OS.
+
+CONFIG_REISERFS_CHECK
+  If you set this to Y, then ReiserFS will perform every check it can
+  possibly imagine of its internal consistency throughout its
+  operation.  It will also go substantially slower.  More than once we
+  have forgotten that this was on, and then gone despondent over the
+  latest benchmarks.:-) Use of this option allows our team to go all
+  out in checking for consistency when debugging without fear of its
+  effect on end users.  If you are on the verge of sending in a bug
+  report, say Y and you might get a useful error message.  Almost
+  everyone should say N.
+
+CONFIG_REISERFS_PROC_INFO
+  Create under /proc/fs/reiserfs hierarchy of files, displaying
+  various ReiserFS statistics and internal data on the expense of
+  making your kernel or module slightly larger (+8 KB).  This also
+  increases amount of kernel memory required for each mount.  Almost
+  everyone but ReiserFS developers and people fine-tuning reiserfs or
+  tracing problems should say N.
+
+CONFIG_EXT2_FS
+  This is the de facto standard Linux file system (method to organize
+  files on a storage device) for hard disks.
+
+  You want to say Y here, unless you intend to use Linux exclusively
+  from inside a DOS partition using the UMSDOS file system. The
+  advantage of the latter is that you can get away without
+  repartitioning your hard drive (which often implies backing
+  everything up and restoring afterwards); the disadvantage is that
+  Linux becomes susceptible to DOS viruses and that UMSDOS is somewhat
+  slower than ext2fs. Even if you want to run Linux in this fashion,
+  it might be a good idea to have ext2fs around: it enables you to
+  read more floppy disks and facilitates the transition to a *real*
+  Linux partition later. Another (rare) case which doesn't require
+  ext2fs is a diskless Linux box which mounts all files over the
+  network using NFS (in this case it's sufficient to say Y to "NFS
+  file system support" below). Saying Y here will enlarge your kernel
+  by about 44 KB.
+
+  The Ext2fs-Undeletion mini-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, gives information about
+  how to retrieve deleted files on ext2fs file systems.
+
+  To change the behavior of ext2 file systems, you can use the tune2fs
+  utility ("man tune2fs"). To modify attributes of files and
+  directories on ext2 file systems, use chattr ("man chattr").
+
+  Ext2fs partitions can be read from within DOS using the ext2tool
+  command line tool package (available from
+  <ftp://ibiblio.org/pub/Linux/system/filesystems/ext2/>) and from
+  within Windows NT using the ext2nt command line tool package from
+  <ftp://ibiblio.org/pub/Linux/utils/dos/>.  Explore2fs is a
+  graphical explorer for ext2fs partitions which runs on Windows 95
+  and Windows NT and includes experimental write support; it is
+  available from
+  <http://jnewbigin-pc.it.swin.edu.au/Linux/Explore2fs.htm>.
+
+  If you want to compile this file system as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called ext2.o.  Be aware however that the file system
+  of your root partition (the one containing the directory /) cannot
+  be compiled as a module, and so this could be dangerous.  Most
+  everyone wants to say Y here.
+
+CONFIG_EXT3_FS
+  This is the journaling version of the Second extended file system
+  (often called ext3), the de facto standard Linux file system
+  (method to organize files on a storage device) for hard disks.
+
+  The journaling code included in this driver means you do not have
+  to run e2fsck (file system checker) on your file systems after a
+  crash.  The journal keeps track of any changes that were being made
+  at the time the system crashed, and can ensure that your file system
+  is consistent without the need for a lengthy check.
+
+  Other than adding the journal to the file system, the on-disk format
+  of ext3 is identical to ext2.  It is possible to freely switch
+  between using the ext3 driver and the ext2 driver, as long as the
+  file system has been cleanly unmounted, or e2fsck is run on the file
+  system.
+
+  To add a journal on an existing ext2 file system or change the
+  behavior of ext3 file systems, you can use the tune2fs utility ("man
+  tune2fs").  To modify attributes of files and directories on ext3
+  file systems, use chattr ("man chattr").  You need to be using
+  e2fsprogs version 1.20 or later in order to create ext3 journals
+  (available at <http://sourceforge.net/projects/e2fsprogs/>).
+
+  If you want to compile this file system as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called ext3.o.  Be aware however that the file system
+  of your root partition (the one containing the directory /) cannot
+  be compiled as a module, and so this may be dangerous.
+
+CONFIG_JBD
+  This is a generic journaling layer for block devices.  It is
+  currently used by the ext3 file system, but it could also be used to
+  add journal support to other file systems or block devices such as
+  RAID or LVM.
+
+  If you are using the ext3 file system, you need to say Y here. If
+  you are not using ext3 then you will probably want to say N.
+
+  If you want to compile this device as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called jbd.o.  If you are compiling ext3 into the kernel,
+  you cannot compile this code as a module.
+
+CONFIG_JBD_DEBUG
+  If you are using the ext3 journaled file system (or potentially any
+  other file system/device using JBD), this option allows you to
+  enable debugging output while the system is running, in order to
+  help track down any problems you are having.  By default the
+  debugging output will be turned off.
+
+  If you select Y here, then you will be able to turn on debugging
+  with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
+  1 and 5, the higher the number, the more debugging output is
+  generated.  To turn debugging off again, do
+  "echo 0 > /proc/sys/fs/jbd-debug".
+
+CONFIG_BFS_FS
+  Boot File System (BFS) is a file system used under SCO UnixWare to
+  allow the bootloader access to the kernel image and other important
+  files during the boot process.  It is usually mounted under /stand
+  and corresponds to the slice marked as "STAND" in the UnixWare
+  partition.  You should say Y if you want to read or write the files
+  on your /stand slice from within Linux.  You then also need to say Y
+  to "UnixWare slices support", below.  More information about the BFS
+  file system is contained in the file
+  <file:Documentation/filesystems/bfs.txt>.
+
+  If you don't know what this is about, say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called bfs.o.  Note that the file system of your root
+  partition (the one containing the directory /) cannot be compiled as
+  a module.
+
+CONFIG_CRAMFS
+  Saying Y here includes support for CramFs (Compressed ROM File
+  System).  CramFs is designed to be a simple, small, and compressed
+  file system for ROM based embedded systems.  CramFs is read-only,
+  limited to 256MB file systems (with 16MB files), and doesn't support
+  16/32 bits uid/gid, hard links and timestamps.
+
+  See <file:Documentation/filesystems/cramfs.txt> and
+  <file:fs/cramfs/README> for further information.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called cramfs.o.  Note that the root file system (the one
+  containing the directory /) cannot be compiled as a module.
+
+  If unsure, say N.
+
+CONFIG_TMPFS
+  Tmpfs is a file system which keeps all files in virtual memory.
+
+  In contrast to RAM disks, which get allocated a fixed amount of
+  physical RAM, tmpfs grows and shrinks to accommodate the files it
+  contains and is able to swap unneeded pages out to swap space.
+
+  Everything is "virtual" in the sense that no files will be created
+  on your hard drive; if you reboot, everything in tmpfs will be
+  lost.
+
+  You should mount the file system somewhere to be able to use
+  POSIX shared memory. Adding the following line to /etc/fstab should
+  take care of things:
+
+  tmpfs		/dev/shm	tmpfs		defaults	0 0
+
+  Remember to create the directory that you intend to mount tmpfs on
+  if necessary (/dev/shm is automagically created if you use devfs).
+
+  You can set limits for the number of blocks and inodes used by the
+  file system with the mount options "size", "nr_blocks" and
+  "nr_inodes". These parameters accept a suffix k, m or g for kilo,
+  mega and giga and can be changed on remount.
+
+  The initial permissions of the root directory can be set with the
+  mount option "mode".
+
+CONFIG_RAMFS
+  Ramfs is a file system which keeps all files in RAM. It allows
+  read and write access.
+
+  It is more of an programming example than a useable file system.  If
+  you need a file system which lives in RAM with limit checking use
+  tmpfs.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ramfs.o.
+
+CONFIG_ISO9660_FS
+  This is the standard file system used on CD-ROMs.  It was previously
+  known as "High Sierra File System" and is called "hsfs" on other
+  Unix systems.  The so-called Rock-Ridge extensions which allow for
+  long Unix filenames and symbolic links are also supported by this
+  driver.  If you have a CD-ROM drive and want to do more with it than
+  just listen to audio CDs and watch its LEDs, say Y (and read
+  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>), thereby
+  enlarging your kernel by about 27 KB; otherwise say N.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called isofs.o.
+
+CONFIG_JOLIET
+  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+  which allows for long filenames in unicode format (unicode is the
+  new 16 bit character code, successor to ASCII, which encodes the
+  characters of almost all languages of the world; see
+  <http://www.unicode.org/> for more information).  Say Y here if you
+  want to be able to read Joliet CD-ROMs under Linux.
+
+CONFIG_ZISOFS
+  This is a Linux-specific extension to RockRidge which lets you store
+  data in compressed form on a CD-ROM and have it transparently
+  decompressed when the CD-ROM is accessed.  See
+  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+  necessary to create such a filesystem.  Say Y here if you want to be
+  able to read such compressed CD-ROMs.
+
+CONFIG_UDF_FS
+  This is the new file system used on some CD-ROMs and DVDs. Say Y if
+  you intend to mount DVD discs or CDRW's written in packet mode, or
+  if written to by other UDF utilities, such as DirectCD. This UDF
+  file system support is read-only. If you want to write to UDF
+  file systems on some media, you need to say Y to "UDF read-write
+  support" below in addition. Please read
+  <file:Documentation/filesystems/udf.txt>.
+
+  This file system support is also available as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). The module is called udf.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_UDF_RW
+  Say Y if you want to test write support for UDF file systems.
+  Due to lack of support for writing to CDR/CDRW's, this option
+  is only supported for hard discs, DVD-RAM, and loopback files.
+
+CONFIG_FAT_FS
+  If you want to use one of the FAT-based file systems (the MS-DOS,
+  VFAT (Windows 95) and UMSDOS (used to run Linux on top of an
+  ordinary DOS partition) file systems), then you must say Y or M here
+  to include FAT support. You will then be able to mount partitions or
+  diskettes with FAT-based file systems and transparently access the
+  files on them, i.e. MSDOS files will look and behave just like all
+  other Unix files.
+
+  This FAT support is not a file system in itself, it only provides
+  the foundation for the other file systems. You will have to say Y or
+  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+  order to make use of it.
+
+  Another way to read and write MSDOS floppies and hard drive
+  partitions from within Linux (but not transparently) is with the
+  mtools ("man mtools") program suite. You don't need to say Y here in
+  order to do that.
+
+  If you need to move large files on floppies between a DOS and a
+  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+  file system and use GNU tar's M option. GNU tar is a program
+  available for Unix and DOS ("man tar" or "info tar").
+
+  It is now also becoming possible to read and write compressed FAT
+  file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
+  details.
+
+  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+  say Y.
+
+  If you want to compile this as a module however ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called fat.o.  Note that if you compile the FAT
+  support as a module, you cannot compile any of the FAT-based file
+  systems into the kernel -- they will have to be modules as well.
+  The file system of your root partition (the one containing the
+  directory /) cannot be a module, so don't say M here if you intend
+  to use UMSDOS as your root file system.
+
+CONFIG_MSDOS_FS
+  This allows you to mount MSDOS partitions of your hard drive (unless
+  they are compressed; to access compressed MSDOS partitions under
+  Linux, you can either use the DOS emulator DOSEMU, described in the
+  DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, or try dmsdosfs in
+  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+  intend to use dosemu with a non-compressed MSDOS partition, say Y
+  here) and MSDOS floppies. This means that file access becomes
+  transparent, i.e. the MSDOS files look and behave just like all
+  other Unix files.
+
+  If you want to use UMSDOS, the Unix-like file system on top of a
+  DOS file system, which allows you to run Linux from within a DOS
+  partition without repartitioning, you'll have to say Y or M here.
+
+  If you have Windows 95 or Windows NT installed on your MSDOS
+  partitions, you should use the VFAT file system (say Y to "VFAT fs
+  support" below), or you will not be able to see the long filenames
+  generated by Windows 95 / Windows NT.
+
+  This option will enlarge your kernel by about 7 KB. If unsure,
+  answer Y. This will only work if you said Y to "DOS FAT fs support"
+  as well. If you want to compile this as a module however ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.
+  The module will be called msdos.o.
+
+CONFIG_VFAT_FS
+  This option provides support for normal Windows file systems with
+  long filenames.  That includes non-compressed FAT-based file systems
+  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+  programs from the mtools package.
+
+  You cannot use the VFAT file system for your Linux root partition
+  (the one containing the directory /); use UMSDOS instead if you
+  want to run Linux from within a DOS partition (i.e. say Y to
+  "Unix like fs on top of std MSDOS fs", below).
+
+  The VFAT support enlarges your kernel by about 10 KB and it only
+  works if you said Y to the "DOS FAT fs support" above.  Please read
+  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+  unsure, say Y.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called vfat.o.
+
+CONFIG_UMSDOS_FS
+  Say Y here if you want to run Linux from within an existing DOS
+  partition of your hard drive. The advantage of this is that you can
+  get away without repartitioning your hard drive (which often implies
+  backing everything up and restoring afterwards) and hence you're
+  able to quickly try out Linux or show it to your friends; the
+  disadvantage is that Linux becomes susceptible to DOS viruses and
+  that UMSDOS is somewhat slower than ext2fs.  Another use of UMSDOS
+  is to write files with long unix filenames to MSDOS floppies; it
+  also allows Unix-style soft-links and owner/permissions of files on
+  MSDOS floppies.  You will need a program called umssync in order to
+  make use of UMSDOS; read
+  <file:Documentation/filesystems/umsdos.txt>.
+
+  To get utilities for initializing/checking UMSDOS file system, or
+  latest patches and/or information, visit the UMSDOS home page at
+  <http://www.voyager.hr/~mnalis/umsdos/>.
+
+  This option enlarges your kernel by about 28 KB and it only works if
+  you said Y to both "DOS FAT fs support" and "MSDOS fs support"
+  above.  If you want to compile this as a module ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called umsdos.o.  Note that the file system of your
+  root partition (the one containing the directory /) cannot be a
+  module, so saying M could be dangerous.  If unsure, say N.
+
+CONFIG_PROC_FS
+  This is a virtual file system providing information about the status
+  of the system. "Virtual" means that it doesn't take up any space on
+  your hard disk: the files are created on the fly by the kernel when
+  you try to access them. Also, you cannot read the files with older
+  version of the program less: you need to use more or cat.
+
+  It's totally cool; for example, "cat /proc/interrupts" gives
+  information about what the different IRQs are used for at the moment
+  (there is a small number of Interrupt ReQuest lines in your computer
+  that are used by the attached devices to gain the CPU's attention --
+  often a source of trouble if two devices are mistakenly configured
+  to use the same IRQ). The program procinfo to display some
+  information about your system gathered from the /proc file system.
+
+  Before you can use the /proc file system, it has to be mounted,
+  meaning it has to be given a location in the directory hierarchy.
+  That location should be /proc. A command such as "mount -t proc proc
+  /proc" or the equivalent line in /etc/fstab does the job.
+
+  The /proc file system is explained in the file
+  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+  ("man 5 proc").
+
+  This option will enlarge your kernel by about 67 KB. Several
+  programs depend on this, so everyone should say Y here.
+
+CONFIG_DEVFS_FS
+  This is support for devfs, a virtual file system (like /proc) which
+  provides the file system interface to device drivers, normally found
+  in /dev. Devfs does not depend on major and minor number
+  allocations. Device drivers register entries in /dev which then
+  appear automatically, which means that the system administrator does
+  not have to create character and block special device files in the
+  /dev directory using the mknod command (or MAKEDEV script) anymore.
+
+  This is work in progress. If you want to use this, you *must* read
+  the material in <file:Documentation/filesystems/devfs/>, especially
+  the file README there.
+
+  If unsure, say N.
+
+CONFIG_DEVFS_MOUNT
+  This option appears if you have CONFIG_DEVFS_FS enabled. Setting
+  this to 'Y' will make the kernel automatically mount devfs onto /dev
+  when the system is booted, before the init thread is started.
+  You can override this with the "devfs=nomount" boot option.
+
+  If unsure, say N.
+
+CONFIG_DEVFS_DEBUG
+  If you say Y here, then the /dev file system code will generate
+  debugging messages. See the file
+  <file:Documentation/filesystems/devfs/boot-options> for more
+  details.
+
+  If unsure, say N.
+
+CONFIG_NFS_FS
+  If you are connected to some other (usually local) Unix computer
+  (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
+  on that computer (the NFS server) using the Network File Sharing
+  protocol, say Y. "Mounting files" means that the client can access
+  the files with usual UNIX commands as if they were sitting on the
+  client's hard disk. For this to work, the server must run the
+  programs nfsd and mountd (but does not need to have NFS file system
+  support enabled in its kernel). NFS is explained in the Network
+  Administrator's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>, on its man page: "man
+  nfs", and in the NFS-HOWTO.
+
+  A superior but less widely used alternative to NFS is provided by
+  the Coda file system; see "Coda file system support" below.
+
+  If you say Y here, you should have said Y to TCP/IP networking also.
+  This option would enlarge your kernel by about 27 KB.
+
+  This file system is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called nfs.o. If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+  If you are configuring a diskless machine which will mount its root
+  file system over NFS at boot time, say Y here and to "Kernel
+  level IP autoconfiguration" above and to "Root file system on NFS"
+  below. You cannot compile this driver as a module in this case.
+  There are two packages designed for booting diskless machines over
+  the net: netboot, available from
+  <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
+  available from <http://ftp1.sourceforge.net/etherboot/>.
+
+  If you don't know what all this is about, say N.
+
+CONFIG_NFS_V3
+  Say Y here if you want your NFS client to be able to speak the newer
+  version 3 of the NFS protocol.
+
+  If unsure, say N.
+
+CONFIG_ROOT_NFS
+  If you want your Linux box to mount its whole root file system (the
+  one containing the directory /) from some other computer over the
+  net via NFS (presumably because your box doesn't have a hard disk),
+  say Y. Read <file:Documentation/nfsroot.txt> for details. It is
+  likely that in this case, you also want to say Y to "Kernel level IP
+  autoconfiguration" so that your box can discover its network address
+  at boot time.
+
+  Most people say N here.
+
+CONFIG_NFSD
+  If you want your Linux box to act as an NFS *server*, so that other
+  computers on your local network which support NFS can access certain
+  directories on your box transparently, you have two options: you can
+  use the self-contained user space program nfsd, in which case you
+  should say N here, or you can say Y and use the kernel based NFS
+  server. The advantage of the kernel based solution is that it is
+  faster.
+
+  In either case, you will need support software; the respective
+  locations are given in the file <file:Documentation/Changes> in the
+  NFS section.
+
+  If you say Y here, you will get support for version 2 of the NFS
+  protocol (NFSv2). If you also want NFSv3, say Y to the next question
+  as well.
+
+  Please read the NFS-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  The NFS server is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called nfsd.o.  If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.  If unsure,
+  say N.
+
+CONFIG_NFSD_V3
+  If you would like to include the NFSv3 server as well as the NFSv2
+  server, say Y here.  If unsure, say Y.
+
+CONFIG_HPFS_FS
+  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+  is the file system used for organizing files on OS/2 hard disk
+  partitions. Say Y if you want to be able to read files from and
+  write files to an OS/2 HPFS partition on your hard drive. OS/2
+  floppies however are in regular MSDOS format, so you don't need this
+  option in order to be able to read them. Read
+  <file:Documentation/filesystems/hpfs.txt>.
+
+  This file system is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called hpfs.o.  If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.  If unsure,
+  say N.
+
+CONFIG_NTFS_FS
+  NTFS is the file system of Microsoft Windows NT. Say Y if you want
+  to get read access to files on NTFS partitions of your hard drive.
+  The Linux NTFS driver supports most of the mount options of the VFAT
+  driver, see <file:Documentation/filesystems/ntfs.txt>. Saying Y here
+  will give you read-only access to NTFS partitions.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ntfs.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_NTFS_RW
+  If you say Y here, you will (maybe) be able to write to NTFS file
+  systems as well as read from them. The read-write support in NTFS
+  is far from being complete and is not well tested. If you say Y
+  here, back up your NTFS volume first, since it will probably get
+  damaged. Also, download the Linux-NTFS project distribution from
+  Sourceforge at <http://linux-ntfs.sf.net/> and always run the
+  included ntfsfix utility after writing to an NTFS partition from
+  Linux to fix some of the damage done by the driver. You should run
+  ntfsfix _after_ unmounting the partition in Linux but _before_
+  rebooting into Windows. When Windows next boots, chkdsk will be
+  run automatically to fix the remaining damage.
+  Please note that write support is limited to Windows NT4 and
+  earlier versions.
+
+  If unsure, say N.
+
+CONFIG_SYSV_FS
+  SCO, Xenix and Coherent are commercial Unix systems for Intel
+  machines, and Version 7 was used on the DEC PDP-11. Saying Y
+  here would allow you to read from their floppies and hard disk
+  partitions.
+
+  If you have floppies or hard disk partitions like that, it is likely
+  that they contain binaries from those other Unix systems; in order
+  to run these binaries, you will want to install linux-abi which is a
+  a set of kernel modules that lets you run SCO, Xenix, Wyse,
+  UnixWare, Dell Unix and System V programs under Linux.  It is
+  available via FTP (user: ftp) from
+  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+  NOTE: that will work only for binaries from Intel-based systems;
+  PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+  If you only intend to mount files from some other Unix over the
+  network using NFS, you don't need the System V file system support
+  (but you need NFS file system support obviously).
+
+  Note that this option is generally not needed for floppies, since a
+  good portable way to transport files and directories between unixes
+  (and even other operating systems) is given by the tar program ("man
+  tar" or preferably "info tar").  Note also that this option has
+  nothing whatsoever to do with the option "System V IPC". Read about
+  the System V file system in
+  <file:Documentation/filesystems/sysv-fs.txt>.
+  Saying Y here will enlarge your kernel by about 27 KB.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called sysv.o.
+
+  If you haven't heard about all of this before, it's safe to say N.
+
+CONFIG_AFFS_FS
+  The Fast File System (FFS) is the common file system used on hard
+  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+  if you want to be able to read and write files from and to an Amiga
+  FFS partition on your hard drive.  Amiga floppies however cannot be
+  read with this driver due to an incompatibility of the floppy
+  controller used in an Amiga and the standard floppy controller in
+  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+  and <file:fs/affs/Changes>.
+
+  With this driver you can also mount disk files used by Bernd
+  Schmidt's Un*X Amiga Emulator
+  (<http://www.freiburg.linux.de/~uae/>).
+  If you want to do this, you will also need to say Y or M to "Loop
+  device support", above.
+
+  This file system is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called affs.o.  If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.  If unsure,
+  say N.
+
+CONFIG_HFS_FS
+  If you say Y here, you will be able to mount Macintosh-formatted
+  floppy disks and hard drive partitions with full read-write access.
+  Please read <file:fs/hfs/HFS.txt> to learn about the available mount
+  options.
+
+  This file system support is also available as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). The module is called hfs.o.  If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_ROMFS_FS
+  This is a very small read-only file system mainly intended for
+  initial ram disks of installation disks, but it could be used for
+  other read-only media as well.  Read
+  <file:Documentation/filesystems/romfs.txt> for details.
+
+  This file system support is also available as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). The module is called romfs.o.  If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  Note that the file system of your
+  root partition (the one containing the directory /) cannot be a
+  module.
+
+  If you don't know whether you need it, then you don't need it:
+  answer N.
+
+CONFIG_QNX4FS_FS
+  This is the file system used by the operating system QNX 4. Say Y if
+  you intend to mount QNX hard disks or floppies. Unless you say Y to
+  "QNX4FS read-write support" below, you will only be able to read
+  these file systems.
+
+  This file system support is also available as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). The module is called qnx4.o. If you want to
+  compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  If you don't know whether you need it, then you don't need it:
+  answer N.
+
+CONFIG_QNX4FS_RW
+  Say Y if you want to test write support for QNX4 file systems.
+
+CONFIG_AUTOFS_FS
+  The automounter is a tool to automatically mount remote file systems
+  on demand. This implementation is partially kernel-based to reduce
+  overhead in the already-mounted case; this is unlike the BSD
+  automounter (amd), which is a pure user space daemon.
+
+  To use the automounter you need the user-space tools from the autofs
+  package; you can find the location in <file:Documentation/Changes>.
+  You also want to answer Y to "NFS file system support", below.
+
+  If you want to use the newer version of the automounter with more
+  features, say N here and say Y to "Kernel automounter v4 support",
+  below.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called autofs.o.
+
+  If you are not a part of a fairly large, distributed network, you
+  probably do not need an automounter, and can say N here.
+
+CONFIG_AUTOFS4_FS
+  The automounter is a tool to automatically mount remote file systems
+  on demand. This implementation is partially kernel-based to reduce
+  overhead in the already-mounted case; this is unlike the BSD
+  automounter (amd), which is a pure user space daemon.
+
+  To use the automounter you need the user-space tools from
+  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/testing-v4/>; you also
+  want to answer Y to "NFS file system support", below.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called autofs4.o.  You will need to add "alias autofs
+  autofs4" to your modules configuration file.
+
+  If you are not a part of a fairly large, distributed network or
+  don't have a laptop which needs to dynamically reconfigure to the
+  local network, you probably do not need an automounter, and can say
+  N here.
+
+CONFIG_EFS_FS
+  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+  uses the XFS file system for hard disk partitions however).
+
+  This implementation only offers read-only access. If you don't know
+  what all this is about, it's safe to say N. For more information
+  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+  If you want to compile the EFS file system support as a module ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>. The module will be called efs.o.
+
+CONFIG_JFFS_FS
+  JFFS is the Journaling Flash File System developed by Axis
+  Communications in Sweden, aimed at providing a crash/powerdown-safe
+  file system for disk-less embedded devices. Further information is
+  available at (<http://developer.axis.com/software/jffs/>).
+
+CONFIG_JFFS_FS_VERBOSE
+  Determines the verbosity level of the JFFS debugging messages.
+
+CONFIG_JFFS2_FS
+  JFFS2 is the second generation of the Journalling Flash File System
+  for use on diskless embedded devices. It provides improved wear
+  levelling, compression and support for hard links. You cannot use
+  this on normal block devices, only on 'MTD' devices.
+
+  Further information should be made available soon at
+  <http://sources.redhat.com/jffs2/>.
+
+CONFIG_JFFS2_FS_DEBUG
+  This controls the amount of debugging messages produced by the JFFS2
+  code. Set it to zero for use in production systems. For evaluation,
+  testing and debugging, it's advisable to set it to one. This will
+  enable a few assertions and will print debugging messages at the
+  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+  is unlikely to be useful - it enables extra debugging in certain
+  areas which at one point needed debugging, but when the bugs were
+  located and fixed, the detailed messages were relegated to level 2.
+
+  If reporting bugs, please try to have available a full dump of the
+  messages at debug level 1 while the misbehaviour was occurring.
+
+CONFIG_JFFS_PROC_FS
+  Enabling this option will cause statistics from mounted JFFS file systems
+  to be made available to the user in the /proc/fs/jffs/ directory.
+
+CONFIG_UFS_FS
+  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+  Unixes can create and mount hard disk partitions and diskettes using
+  this file system as well. Saying Y here will allow you to read from
+  these partitions; if you also want to write to them, say Y to the
+  experimental "UFS file system write support", below. Please read the
+  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+  If you only intend to mount files from some other Unix over the
+  network using NFS, you don't need the UFS file system support (but
+  you need NFS file system support obviously).
+
+  Note that this option is generally not needed for floppies, since a
+  good portable way to transport files and directories between unixes
+  (and even other operating systems) is given by the tar program ("man
+  tar" or preferably "info tar").
+
+  When accessing NeXTstep files, you may need to convert them from the
+  NeXT character set to the Latin1 character set; use the program
+  recode ("info recode") for this purpose.
+
+  If you want to compile the UFS file system support as a module ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>. The module will be called ufs.o.
+
+  If you haven't heard about all of this before, it's safe to say N.
+
+CONFIG_UFS_FS_WRITE
+  Say Y here if you want to try writing to UFS partitions. This is
+  experimental, so you should back up your UFS partitions beforehand.
+
+CONFIG_ADFS_FS
+  The Acorn Disc Filing System is the standard file system of the
+  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+  systems and the Acorn Archimedes range of machines. If you say Y
+  here, Linux will be able to read from ADFS partitions on hard drives
+  and from ADFS-formatted floppy discs. If you also want to be able to
+  write to those devices, say Y to "ADFS write support" below.
+
+  The ADFS partition should be the first partition (i.e.,
+  /dev/[hs]d?1) on each of your drives. Please read the file
+  <file:Documentation/filesystems/adfs.txt> for further details.
+
+  This code is also available as a module called adfs.o ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_ADFS_FS_RW
+  If you say Y here, you will be able to write to ADFS partitions on
+  hard drives and ADFS-formatted floppy disks. This is experimental
+  codes, so if you're unsure, say N.
+
+CONFIG_DEVPTS_FS
+  You should say Y here if you said Y to "Unix98 PTY support" above.
+  You'll then get a virtual file system which can be mounted on
+  /dev/pts with "mount -t devpts". This, together with the pseudo
+  terminal master multiplexer /dev/ptmx, is used for pseudo terminal
+  support as described in The Open Group's Unix98 standard: in order
+  to acquire a pseudo terminal, a process opens /dev/ptmx; the number
+  of the pseudo terminal is then made available to the process and the
+  pseudo terminal slave can be accessed as /dev/pts/<number>. What was
+  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+  The GNU C library glibc 2.1 contains the requisite support for this
+  mode of operation; you also need client programs that use the Unix98
+  API. Please read <file:Documentation/Changes> for more information
+  about the Unix98 pty devices.
+
+  Note that the experimental "/dev file system support"
+  (CONFIG_DEVFS_FS)  is a more general facility.
+
+CONFIG_VXFS_FS
+  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+  file system format.  VERITAS VxFS(TM) is the standard file system
+  of SCO UnixWare (and possibly others) and optionally available
+  for Sunsoft Solaris, HP-UX and many other operating systems.
+  Currently only readonly access is supported.
+
+  NOTE: the file system type as used by mount(1), mount(2) and
+        fstab(5) is 'vxfs' as it describes the file system format, not
+        the actual driver.
+
+  This file system is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called freevxfs.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  If
+  unsure, say N.
+
+CONFIG_SMB_FS
+  SMB (Server Message Block) is the protocol Windows for Workgroups
+  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+  files and printers over local networks.  Saying Y here allows you to
+  mount their file systems (often called "shares" in this context) and
+  access them just like any other Unix directory.  Currently, this
+  works only if the Windows machines use TCP/IP as the underlying
+  transport protocol, and not NetBEUI.  For details, read
+  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note: if you just want your box to act as an SMB *server* and make
+  files and printing services available to Windows clients (which need
+  to have a TCP/IP stack), you don't need to say Y here; you can use
+  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+  for that.
+
+  General information about how to connect Linux, Windows machines and
+  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+  If you want to compile the SMB support as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called smbfs.o.  Most people say N, however.
+
+CONFIG_SMB_NLS_DEFAULT
+  Enabling this will make smbfs use nls translations by default. You
+  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+  settings and you need to give the default nls for the SMB server as
+  CONFIG_SMB_NLS_REMOTE.
+
+  The nls settings can be changed at mount time, if your smbmount
+  supports that, using the codepage and iocharset parameters.
+
+  smbmount from samba 2.2.0 or later supports this.
+
+CONFIG_SMB_NLS_REMOTE
+  This setting allows you to specify a default value for which
+  codepage the server uses. If this field is left blank no
+  translations will be done by default. The local codepage/charset
+  default to CONFIG_NLS_DEFAULT.
+
+  The nls settings can be changed at mount time, if your smbmount
+  supports that, using the codepage and iocharset parameters.
+
+  smbmount from samba 2.2.0 or later supports this.
+
+CONFIG_CODA_FS
+  Coda is an advanced network file system, similar to NFS in that it
+  enables you to mount file systems of a remote server and access them
+  with regular Unix commands as if they were sitting on your hard
+  disk.  Coda has several advantages over NFS: support for
+  disconnected operation (e.g. for laptops), read/write server
+  replication, security model for authentication and encryption,
+  persistent client caches and write back caching.
+
+  If you say Y here, your Linux box will be able to act as a Coda
+  *client*.  You will need user level code as well, both for the
+  client and server.  Servers are currently user level, i.e. they need
+  no kernel support.  Please read
+  <file:Documentation/filesystems/coda.txt> and check out the Coda
+  home page <http://www.coda.cs.cmu.edu/>.
+
+  If you want to compile the coda client support as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want), say M here and read
+  <file:Documentation/modules.txt>.  The module will be called coda.o.
+
+CONFIG_INTERMEZZO_FS
+  InterMezzo is a networked file system with disconnected operation
+  and kernel level write back caching.  It is most often used for
+  replicating potentially large trees or keeping laptop/desktop copies
+  in sync.
+
+  If you say Y or M your kernel or module will provide InterMezzo
+  support.  You will also need a file server daemon, which you can get
+  from <http://www.inter-mezzo.org/>.
+
+CONFIG_NCP_FS
+  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+  used by Novell NetWare clients to talk to file servers.  It is to
+  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+  to mount NetWare file server volumes and to access them just like
+  any other Unix directory.  For details, please read the file
+  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+  the IPX-HOWTO from <http://www.linuxdoc.org/docs.html#howto>.
+
+  You do not have to say Y here if you want your Linux box to act as a
+  file *server* for Novell NetWare clients.
+
+  General information about how to connect Linux, Windows machines and
+  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+  If you want to compile this as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called ncpfs.o.  Say N unless you are connected to a Novell
+  network.
+
+CONFIG_NCPFS_NLS
+  Allows you to use codepages and I/O charsets for file name
+  translation between the server file system and input/output. This
+  may be useful, if you want to access the server with other operating
+  systems, e.g. Windows 95. See also NLS for more Information.
+
+  To select codepages and I/O charsets use ncpfs-2.2.0.13 or newer.
+
diff -urN linux-2.5.3-pre4/fs/driverfs/inode.c linux/fs/driverfs/inode.c
--- linux-2.5.3-pre4/fs/driverfs/inode.c	Thu Jan 24 12:35:17 2002
+++ linux/fs/driverfs/inode.c	Thu Jan 24 12:35:37 2002
@@ -105,9 +105,11 @@
 static int driverfs_mknod(struct inode *dir, struct dentry *dentry, int mode, int dev)
 {
 	struct inode *inode = driverfs_get_inode(dir->i_sb, mode, dev);
-	int error = -ENOSPC;
+	int error = -EPERM;
 
-	if (inode) {
+	/* only allow create if ->d_fsdata is not NULL (so we can assume it 
+	 * comes from the driverfs API below. */
+	if (dentry->d_fsdata && inode) {
 		d_instantiate(dentry, inode);
 		dget(dentry);
 		error = 0;
@@ -239,20 +241,14 @@
 		DBG("%s: file entry is NULL\n",__FUNCTION__);
 		return -ENOENT;
 	}
+	if (!entry->show)
+		return 0;
 
 	dev = list_entry(entry->parent,struct device, dir);
 
-	if (!valid_device(dev))
-		return -EFAULT;
-
-	if (!entry->show)
-		goto done;
-
 	page = (unsigned char*)__get_free_page(GFP_KERNEL);
-	if (!page) {
-		retval = -ENOMEM;
-		goto done;
-	}
+	if (!page)
+		return -ENOMEM;
 
 	while (count > 0) {
 		ssize_t len;
@@ -276,9 +272,6 @@
 		retval += len;
 	}
 	free_page((unsigned long)page);
-
- done:
-	put_device(dev);
 	return retval;
 }
 
@@ -307,15 +300,11 @@
 		DBG("%s: file entry is NULL\n",__FUNCTION__);
 		return -ENOENT;
 	}
+	if (!entry->store)
+		return 0;
 
 	dev = list_entry(entry->parent,struct device, dir);
 
-	if (!valid_device(dev))
-		return -EFAULT;
-
-	if (!entry->store)
-		goto done;
-
 	while (count > 0) {
 		ssize_t len;
 
@@ -331,8 +320,6 @@
 		*ppos += len;
 		buf += len;
 	}
- done:
-	put_device(dev);
 	return retval;
 }
 
@@ -362,9 +349,28 @@
 
 static int driverfs_open_file(struct inode * inode, struct file * filp)
 {
-	if (filp && inode)
-		filp->private_data = inode->u.generic_ip;
+	struct driver_file_entry * entry;
+	struct device * dev;
+
+	entry = (struct driver_file_entry *)inode->u.generic_ip;
+	if (!entry)
+		return -EFAULT;
+	dev = (struct device *)list_entry(entry->parent,struct device,dir);
+	get_device(dev);
+	filp->private_data = entry;
+	return 0;
+}
+
+static int driverfs_flush(struct file * filp)
+{
+	struct driver_file_entry * entry;
+	struct device * dev;
 
+	entry = (struct driver_file_entry *)filp->private_data;
+	if (!entry)
+		return -EFAULT;
+	dev = (struct device *)list_entry(entry->parent,struct device,dir);
+	put_device(dev);
 	return 0;
 }
 
@@ -396,6 +402,7 @@
 	llseek:		driverfs_file_lseek,
 	mmap:		generic_file_mmap,
 	open:		driverfs_open_file,
+	flush:		driverfs_flush,
 	fsync:		driverfs_sync_file,
 };
 
@@ -627,13 +634,13 @@
 	dentry = lookup_hash(&qstr,parent_dentry);
 	if (IS_ERR(dentry))
 		error = PTR_ERR(dentry);
-	else
+	else {
+		dentry->d_fsdata = (void *)entry;
 		error = vfs_create(parent_dentry->d_inode,dentry,entry->mode);
-
+	}
 
 	/* Still good? Ok, then fill in the blanks: */
 	if (!error) {
-		dentry->d_fsdata = (void *)entry;
 		dentry->d_inode->u.generic_ip = (void *)entry;
 
 		entry->dentry = dentry;
diff -urN linux-2.5.3-pre4/fs/ncpfs/Config.help linux/fs/ncpfs/Config.help
--- linux-2.5.3-pre4/fs/ncpfs/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/fs/ncpfs/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,59 @@
+CONFIG_NCPFS_PACKET_SIGNING
+  NCP allows packets to be signed for stronger security. If you want
+  security, say Y.  Normal users can leave it off.  To be able to use
+  packet signing you must use ncpfs > 2.0.12.
+
+CONFIG_NCPFS_IOCTL_LOCKING
+  Allows locking of records on remote volumes.  Say N unless you have
+  special applications which are able to utilize this locking scheme.
+
+CONFIG_NCPFS_STRONG
+  Allows manipulation of files flagged as Delete or Rename Inhibit.
+  To use this feature you must mount volumes with the ncpmount
+  parameter "-s" (ncpfs-2.0.12 and newer).  Say Y unless you are not
+  mounting volumes with -f 444.
+
+CONFIG_NCPFS_NFS_NS
+  Allows you to utilize NFS namespace on NetWare servers.  It brings
+  you case sensitive filenames.  Say Y.  You can disable it at
+  mount-time with the `-N nfs' parameter of ncpmount.
+
+CONFIG_NCPFS_OS2_NS
+  Allows you to utilize OS2/LONG namespace on NetWare servers.
+  Filenames in this namespace are limited to 255 characters, they are
+  case insensitive, and case in names is preserved.  Say Y.  You can
+  disable it at mount time with the -N os2 parameter of ncpmount.
+
+CONFIG_NCPFS_SMALLDOS
+  If you say Y here, every filename on a NetWare server volume using
+  the OS2/LONG namespace and created under DOS or on a volume using
+  DOS namespace will be converted to lowercase characters.
+  Saying N here will give you these filenames in uppercase.
+
+  This is only a cosmetic option since the OS2/LONG namespace is case
+  insensitive. The only major reason for this option is backward
+  compatibility when moving from DOS to OS2/LONG namespace support.
+  Long filenames (created by Win95) will not be affected.
+
+  This option does not solve the problem that filenames appear
+  differently under Linux and under Windows, since Windows does an
+  additional conversions on the client side. You can achieve similar
+  effects by saying Y to "Allow using of Native Language Support"
+  below.
+
+CONFIG_NCPFS_NLS
+  Allows you to use codepages and I/O charsets for file name
+  translation between the server file system and input/output. This
+  may be useful, if you want to access the server with other operating
+  systems, e.g. Windows 95. See also NLS for more Information.
+
+  To select codepages and I/O charsets use ncpfs-2.2.0.13 or newer.
+
+CONFIG_NCPFS_EXTRAS
+  This enables the use of symbolic links and an execute permission
+  bit on NCPFS. The file server need not have long name space or NFS
+  name space loaded for these to work.
+
+  To use the new attributes, it is recommended to use the flags
+  '-f 600 -d 755' on the ncpmount command line.
+
diff -urN linux-2.5.3-pre4/fs/nls/Config.help linux/fs/nls/Config.help
--- linux-2.5.3-pre4/fs/nls/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/fs/nls/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,351 @@
+CONFIG_NLS_DEFAULT
+  The default NLS used when mounting file system. Note, that this is
+  the NLS used by your console, not the NLS used by a specific file
+  system (if different) to store data (filenames) on a disk.
+  Currently, the valid values are:
+  big5, cp437, cp737, cp775, cp850, cp852, cp855, cp857, cp860, cp861,
+  cp862, cp863, cp864, cp865, cp866, cp869, cp874, cp932, cp936,
+  cp949, cp950, cp1251, cp1255, euc-jp, euc-kr, gb2312, iso8859-1,
+  iso8859-2, iso8859-3, iso8859-4, iso8859-5, iso8859-6, iso8859-7,
+  iso8859-8, iso8859-9, iso8859-13, iso8859-14, iso8859-15,
+  koi8-r, koi8-ru, koi8-u, sjis, tis-620, utf8.
+  If you specify a wrong value, it will use the built-in NLS;
+  compatible with iso8859-1.
+
+  If unsure, specify it as "iso8859-1".
+
+CONFIG_NLS_CODEPAGE_437
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored
+  in so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage that is used in
+  the United States and parts of Canada. This is recommended.
+
+CONFIG_NLS_CODEPAGE_737
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored
+  in so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage that is used for
+  Greek. If unsure, say N.
+
+CONFIG_NLS_CODEPAGE_775
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored
+  in so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage that is used
+  for the Baltic Rim Languages (Latvian and Lithuanian). If unsure,
+  say N.
+
+CONFIG_NLS_CODEPAGE_850
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage that is used for
+  much of Europe -- United Kingdom, Germany, Spain, Italy, and [add
+  more countries here]. It has some characters useful to many European
+  languages that are not part of the US codepage 437.
+
+  If unsure, say Y.
+
+CONFIG_NLS_CODEPAGE_852
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the Latin 2 codepage used by DOS
+  for much of Central and Eastern Europe. It has all the required
+  characters for these languages: Albanian, Croatian, Czech, English,
+  Finnish, Hungarian, Irish, German, Polish, Romanian, Serbian (Latin
+  transcription), Slovak, Slovenian, and Sorbian.
+
+CONFIG_NLS_CODEPAGE_855
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Cyrillic.
+
+CONFIG_NLS_CODEPAGE_857
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Turkish.
+
+CONFIG_NLS_CODEPAGE_860
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Portuguese.
+
+CONFIG_NLS_CODEPAGE_861
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Icelandic.
+
+CONFIG_NLS_CODEPAGE_862
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Hebrew.
+
+CONFIG_NLS_CODEPAGE_863
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Canadian
+  French.
+
+CONFIG_NLS_CODEPAGE_864
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Arabic.
+
+CONFIG_NLS_CODEPAGE_865
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for the Nordic
+  European countries.
+
+CONFIG_NLS_CODEPAGE_866
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for
+  Cyrillic/Russian.
+
+CONFIG_NLS_CODEPAGE_869
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Greek.
+
+CONFIG_NLS_CODEPAGE_874
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Thai.
+
+CONFIG_NLS_CODEPAGE_1251
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Russian and
+  Bulgarian and Belarusian.
+
+CONFIG_NLS_CODEPAGE_932
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Shift-JIS
+  or EUC-JP. To use EUC-JP, you can use 'euc-jp' as mount option or
+  NLS Default value during kernel configuration, instead of 'cp932'.
+
+CONFIG_NLS_CODEPAGE_936
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Simplified
+  Chinese(GBK).
+
+CONFIG_NLS_CODEPAGE_949
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for UHC.
+
+CONFIG_NLS_CODEPAGE_950
+  The Microsoft FAT file system family can deal with filenames in
+  native language character sets. These character sets are stored in
+  so-called DOS codepages. You need to include the appropriate
+  codepage if you want to be able to read/write these filenames on
+  DOS/Windows partitions correctly. This does apply to the filenames
+  only, not to the file contents. You can include several codepages;
+  say Y here if you want to include the DOS codepage for Traditional
+  Chinese(Big5).
+
+CONFIG_NLS_ISO8859_1
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 1 character
+  set, which covers most West European languages such as Albanian,
+  Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German,
+  Galician, Irish, Icelandic, Italian, Norwegian, Portuguese, Spanish,
+  and Swedish. It is also the default for the US. If unsure, say Y.
+
+CONFIG_NLS_ISO8859_2
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 2 character
+  set, which works for most Latin-written Slavic and Central European
+  languages: Czech, German, Hungarian, Polish, Rumanian, Croatian,
+  Slovak, Slovene.
+
+CONFIG_NLS_ISO8859_3
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 3 character
+  set, which is popular with authors of Esperanto, Galician, Maltese,
+  and Turkish.
+
+CONFIG_NLS_ISO8859_4
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 4 character
+  set which introduces letters for Estonian, Latvian, and
+  Lithuanian. It is an incomplete predecessor of Latin 7.
+
+CONFIG_NLS_ISO8859_5
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for ISO8859-5, a Cyrillic
+  character set with which you can type Bulgarian, Belarusian,
+  Macedonian, Russian, Serbian, and Ukrainian. Note that the charset
+  KOI8-R is preferred in Russia.
+
+CONFIG_NLS_ISO8859_6
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for ISO8859-6, the Arabic
+  character set.
+
+CONFIG_NLS_ISO8859_7
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for ISO8859-7, the Modern
+  Greek character set.
+
+CONFIG_NLS_ISO8859_8
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for ISO8859-8, the Hebrew
+  character set.
+
+CONFIG_NLS_ISO8859_9
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 5 character
+  set, and it replaces the rarely needed Icelandic letters in Latin 1
+  with the Turkish ones. Useful in Turkey.
+
+CONFIG_NLS_ISO8859_13
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 7 character
+  set, which supports modern Baltic languages including Latvian
+  and Lithuanian.
+
+CONFIG_NLS_ISO8859_14
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 8 character
+  set, which adds the last accented vowels for Welsh (aka Cymraeg)
+  (and Manx Gaelic) that were missing in Latin 1.
+  <http://linux.speech.cymru.org/> has further information.
+
+CONFIG_NLS_ISO8859_15
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the Latin 9 character
+  set, which covers most West European languages such as Albanian,
+  Catalan, Danish, Dutch, English, Estonian, Faeroese, Finnish,
+  French, German, Galician, Irish, Icelandic, Italian, Norwegian,
+  Portuguese, Spanish, and Swedish. Latin 9 is an update to
+  Latin 1 (ISO 8859-1) that removes a handful of rarely used
+  characters and instead adds support for Estonian, corrects the
+  support for French and Finnish, and adds the new Euro character.
+  If unsure, say Y.
+
+CONFIG_NLS_KOI8_R
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the preferred Russian
+  character set.
+
+CONFIG_NLS_KOI8_U
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the preferred Ukrainian
+  (koi8-u) and Belarusian (koi8-ru) character sets.
+
+CONFIG_NLS_UTF8
+  If you want to display filenames with native language characters
+  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+  correctly on the screen, you need to include the appropriate
+  input/output character sets. Say Y here for the UTF-8 encoding of
+  the Unicode/ISO9646 universal character set.
+
diff -urN linux-2.5.3-pre4/fs/partitions/Config.help linux/fs/partitions/Config.help
--- linux-2.5.3-pre4/fs/partitions/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/fs/partitions/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,144 @@
+CONFIG_PARTITION_ADVANCED
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned under an operating system running on a different
+  architecture than your Linux system.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about foreign partitioning schemes.
+
+  If unsure, say N.
+
+CONFIG_ACORN_PARTITION
+  Support hard disks partitioned under Acorn operating systems.
+
+CONFIG_ACORN_PARTITION_ADFS
+  The Acorn Disc Filing System is the standard file system of the
+  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+  systems and the Acorn Archimedes range of machines.  If you say
+  `Y' here, Linux will support disk partitions created under ADFS.
+
+CONFIG_ACORN_PARTITION_POWERTEC
+  Support reading partition tables created on Acorn machines using
+  the PowerTec SCSI drive.
+
+CONFIG_ACORN_PARTITION_RISCIX
+  Once upon a time, there was a native Unix port for the Acorn series
+  of machines called RISCiX.  If you say 'Y' here, Linux will be able
+  to read disks partitioned under RISCiX.
+
+CONFIG_ACORN_PARTITION_ICS
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned using the ICS interface on Acorn machines.
+
+CONFIG_OSF_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned on an Alpha machine.
+
+CONFIG_MAC_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned on a Macintosh.
+
+CONFIG_LDM_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned using Windows 2000's or XP's Logical Disk Manager.
+  They are also known as "Dynamic Disks".
+
+  Windows 2000 introduced the concept of Dynamic Disks to get around
+  the limitations of the PC's partitioning scheme.  The Logical Disk
+  Manager allows the user to repartion a disk and create spanned,
+  mirrored, striped or RAID volumes, all without the need for
+  rebooting.
+
+  Normal partitions are now called Basic Disks under Windows 2000 and
+  XP.
+
+  Technical documentation to accompany this driver is available from:
+  <http://linux-ntfs.sf.net/ldm/>.
+
+  If unsure, say N.
+
+CONFIG_LDM_DEBUG
+  Say Y here if you would like LDM to log verbosely.  This could be
+  helpful if the driver doesn't work as expected and you'd like to
+  report a bug.
+
+  If unsure, say N.
+
+CONFIG_MSDOS_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned on an x86 PC (not necessarily by DOS).
+
+CONFIG_AMIGA_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned under AmigaOS.
+
+CONFIG_ATARI_PARTITION
+  Say Y here if you would like to use hard disks under Linux which
+  were partitioned under the Atari OS.
+
+CONFIG_BSD_DISKLABEL
+  FreeBSD uses its own hard disk partition scheme on your PC. It
+  requires only one entry in the primary partition table of your disk
+  and manages it similarly to DOS extended partitions, putting in its
+  first sector a new partition table in BSD disklabel format. Saying Y
+  here allows you to read these disklabels and further mount FreeBSD
+  partitions from within Linux if you have also said Y to "UFS
+  file system support", above. If you don't know what all this is
+  about, say N.
+
+CONFIG_MINIX_SUBPARTITION
+  Minix 2.0.0/2.0.2 subpartition table support for Linux.
+  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
+  subpartitions.
+
+CONFIG_SUN_PARTITION
+  Like most systems, SunOS uses its own hard disk partition table
+  format, incompatible with all others. Saying Y here allows you to
+  read these partition tables and further mount SunOS partitions from
+  within Linux if you have also said Y to "UFS file system support",
+  above. This is mainly used to carry data from a SPARC under SunOS to
+  your Linux box via a removable medium like magneto-optical or ZIP
+  drives; note however that a good portable way to transport files and
+  directories between unixes (and even other operating systems) is
+  given by the tar program ("man tar" or preferably "info tar"). If
+  you don't know what all this is about, say N.
+
+CONFIG_SOLARIS_X86_PARTITION
+  Like most systems, Solaris x86 uses its own hard disk partition
+  table format, incompatible with all others. Saying Y here allows you
+  to read these partition tables and further mount Solaris x86
+  partitions from within Linux if you have also said Y to "UFS
+  file system support", above.
+
+CONFIG_SGI_PARTITION
+  Say Y here if you would like to be able to read the hard disk
+  partition table format used by SGI machines.
+
+CONFIG_ULTRIX_PARTITION
+  Say Y here if you would like to be able to read the hard disk
+  partition table format used by DEC (now Compaq) Ultrix machines.
+  Otherwise, say N.
+
+CONFIG_IBM_PARTITION
+  Say Y here if you would like to be able to read the hard disk
+  partition table format used by IBM DASD disks operating under CMS.
+  Otherwise, say N.
+
+CONFIG_UNIXWARE_DISKLABEL
+  Like some systems, UnixWare uses its own slice table inside a
+  partition (VTOC - Virtual Table of Contents). Its format is
+  incompatible with all other OSes. Saying Y here allows you to read
+  VTOC and further mount UnixWare partitions read-only from within
+  Linux if you have also said Y to "UFS file system support" or
+  "System V and Coherent file system support", above.
+
+  This is mainly used to carry data from a UnixWare box to your
+  Linux box via a removable medium like magneto-optical, ZIP or
+  removable IDE drives. Note, however, that a good portable way to
+  transport files and directories between unixes (and even other
+  operating systems) is given by the tar program ("man tar" or
+  preferably "info tar").
+
+  If you don't know what all this is about, say N.
+
diff -urN linux-2.5.3-pre4/include/asm-i386/hw_irq.h linux/include/asm-i386/hw_irq.h
--- linux-2.5.3-pre4/include/asm-i386/hw_irq.h	Thu Jan 24 12:35:17 2002
+++ linux/include/asm-i386/hw_irq.h	Thu Jan 24 12:35:38 2002
@@ -137,22 +137,6 @@
 	"call "SYMBOL_NAME_STR(smp_##x)"\n\t" \
 	"jmp ret_from_intr\n");
 
-#define BUILD_SMP_TIMER_INTERRUPT(x,v) XBUILD_SMP_TIMER_INTERRUPT(x,v)
-#define XBUILD_SMP_TIMER_INTERRUPT(x,v) \
-asmlinkage void x(struct pt_regs * regs); \
-asmlinkage void call_##x(void); \
-__asm__( \
-"\n"__ALIGN_STR"\n" \
-SYMBOL_NAME_STR(x) ":\n\t" \
-	"pushl $"#v"-256\n\t" \
-	SAVE_ALL \
-	"movl %esp,%eax\n\t" \
-	"pushl %eax\n\t" \
-	SYMBOL_NAME_STR(call_##x)":\n\t" \
-	"call "SYMBOL_NAME_STR(smp_##x)"\n\t" \
-	"addl $4,%esp\n\t" \
-	"jmp ret_from_intr\n");
-
 #define BUILD_COMMON_IRQ() \
 asmlinkage void call_do_IRQ(void); \
 __asm__( \
diff -urN linux-2.5.3-pre4/include/asm-i386/page.h linux/include/asm-i386/page.h
--- linux-2.5.3-pre4/include/asm-i386/page.h	Mon Jan 14 13:27:06 2002
+++ linux/include/asm-i386/page.h	Thu Jan 24 12:35:38 2002
@@ -80,6 +80,12 @@
 
 #define __PAGE_OFFSET		(0xC0000000)
 
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+#define __VMALLOC_RESERVE	(128 << 20)
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -118,6 +124,9 @@
 #endif /* __ASSEMBLY__ */
 
 #define PAGE_OFFSET		((unsigned long)__PAGE_OFFSET)
+#define VMALLOC_RESERVE		((unsigned long)__VMALLOC_RESERVE)
+#define __MAXMEM		(-__PAGE_OFFSET-__VMALLOC_RESERVE)
+#define MAXMEM			((unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE))
 #define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
 #define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
 #define virt_to_page(kaddr)	(mem_map + (__pa(kaddr) >> PAGE_SHIFT))
diff -urN linux-2.5.3-pre4/include/asm-sh/mmu_context.h linux/include/asm-sh/mmu_context.h
--- linux-2.5.3-pre4/include/asm-sh/mmu_context.h	Sat Sep  8 12:29:09 2001
+++ linux/include/asm-sh/mmu_context.h	Thu Jan 24 12:35:38 2002
@@ -185,4 +185,28 @@
 enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk, unsigned cpu)
 {
 }
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 168-bit bitmap where the first 128 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 168
+ * bits is cleared.
+ */
+#if MAX_RT_PRIO != 128 || MAX_PRIO != 168
+# error update this function.
+#endif
+
+static inline int sched_find_first_zero_bit(unsigned long *b)
+{
+	unsigned int rt;
+
+	rt = b[0] & b[1] & b[2] & b[3];
+	if (unlikely(rt != 0xffffffff))
+		return find_first_zero_bit(b, MAX_RT_PRIO);
+
+	if (b[4] != ~0)
+		return ffz(b[4]) + MAX_RT_PRIO;
+	return ffz(b[5]) + 32 + MAX_RT_PRIO;
+}
+
 #endif /* __ASM_SH_MMU_CONTEXT_H */
diff -urN linux-2.5.3-pre4/include/asm-sh/pgtable.h linux/include/asm-sh/pgtable.h
--- linux-2.5.3-pre4/include/asm-sh/pgtable.h	Thu Jan 24 12:35:17 2002
+++ linux/include/asm-sh/pgtable.h	Thu Jan 24 12:35:38 2002
@@ -237,6 +237,19 @@
 static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; }
 
 /*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot &= ~_PAGE_CACHABLE;
+	return __pgprot(prot);
+}
+
+/*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  *
diff -urN linux-2.5.3-pre4/include/asm-sh/processor.h linux/include/asm-sh/processor.h
--- linux-2.5.3-pre4/include/asm-sh/processor.h	Fri Oct  5 12:11:05 2001
+++ linux/include/asm-sh/processor.h	Thu Jan 24 12:35:38 2002
@@ -184,18 +184,22 @@
 
 #define unlazy_fpu(tsk) do { 			\
 	if ((tsk)->flags & PF_USEDFPU) {	\
-		grab_fpu();			\
 		save_fpu(tsk); 			\
 	}					\
 } while (0)
 
 #define clear_fpu(tsk) do { 			\
-	if ((tsk)->flags & PF_USEDFPU)	 	\
+	if ((tsk)->flags & PF_USEDFPU) { 	\
 		(tsk)->flags &= ~PF_USEDFPU; 	\
+		release_fpu();			\
+	}					\
 } while (0)
 
 /* Double presision, NANS as NANS, rounding to nearest, no exceptions */
 #define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
 
 /*
  * Return saved PC of a blocked thread.
diff -urN linux-2.5.3-pre4/include/asm-sh/scatterlist.h linux/include/asm-sh/scatterlist.h
--- linux-2.5.3-pre4/include/asm-sh/scatterlist.h	Fri Oct 12 15:35:54 2001
+++ linux/include/asm-sh/scatterlist.h	Thu Jan 24 12:35:38 2002
@@ -2,7 +2,11 @@
 #define __ASM_SH_SCATTERLIST_H
 
 struct scatterlist {
-    char *  address;    /* Location data is to be transferred to */
+    char *  address;    /* Location data is to be transferred to, NULL for
+			 * highmem page */
+    struct page * page; /* Location for highmem page, if any */
+    unsigned int offset;/* for highmem, page offset */
+    dma_addr_t dma_address;
     unsigned int length;
 };
 
diff -urN linux-2.5.3-pre4/include/linux/device.h linux/include/linux/device.h
--- linux-2.5.3-pre4/include/linux/device.h	Thu Jan 24 12:35:17 2002
+++ linux/include/linux/device.h	Thu Jan 24 12:35:38 2002
@@ -147,12 +147,8 @@
  * High level routines for use by the bus drivers
  */
 extern int device_register(struct device * dev);
-extern struct device * device_alloc(void);
-extern void device_init_dev(struct device * dev);
 
 extern int iobus_register(struct iobus * iobus);
-extern struct iobus * iobus_alloc(void);
-extern void iobus_init(struct iobus * iobus);
 
 extern int device_create_file(struct device *device, struct driver_file_entry * entry);
 extern void device_remove_file(struct device * dev, const char * name);
@@ -190,32 +186,12 @@
  */
 static inline void get_device(struct device * dev)
 {
+	BUG_ON(!atomic_read(&dev->refcount));
 	atomic_inc(&dev->refcount);
 }
 
 extern void put_device(struct device * dev);
 
-
-/**
- * valid_device - check if device is valid
- * @dev:	device in question
- *
- * Check whether or not a device can be operated on.
- * If so, increment the reference count and carry on.
- */
-static inline int valid_device(struct device * dev)
-{
-	int val;
-
-	lock_device(dev);
-	val = atomic_read(&dev->refcount);
-	if (val)
-		get_device(dev);
-	unlock_device(dev);
-	return (val > 0);
-}
-
-
 static inline void lock_iobus(struct iobus * iobus)
 {
 	spin_lock(&iobus->lock);
@@ -228,18 +204,8 @@
 
 static inline void get_iobus(struct iobus * iobus)
 {
+	BUG_ON(!atomic_read(&iobus->refcount));
 	atomic_inc(&iobus->refcount);
-}
-
-static inline int valid_iobus(struct iobus * iobus)
-{
-	int val;
-	lock_iobus(iobus);
-	val = atomic_read(&iobus->refcount);
-	if (val)
-		get_iobus(iobus);
-	unlock_iobus(iobus);
-	return (val > 0);
 }
 
 extern void put_iobus(struct iobus * iobus);
diff -urN linux-2.5.3-pre4/include/linux/mii.h linux/include/linux/mii.h
--- linux-2.5.3-pre4/include/linux/mii.h	Mon Jan 14 13:29:18 2002
+++ linux/include/linux/mii.h	Thu Jan 24 12:35:38 2002
@@ -70,6 +70,8 @@
 #define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
 #define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
 
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
+			ADVERTISE_CSMA)
 #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
                        ADVERTISE_100HALF | ADVERTISE_100FULL)
 
@@ -100,6 +102,27 @@
 #define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
 #define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
 #define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
+
+
+struct mii_if_info {
+	int phy_id;
+	int advertising;
+
+	unsigned int full_duplex : 1;
+	unsigned int duplex_lock : 1;
+
+	struct net_device *dev;
+	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
+	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
+};
+
+struct ethtool_cmd;
+
+int mii_link_ok (struct mii_if_info *mii);
+int mii_nway_restart (struct mii_if_info *mii);
+int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+
 
 /* This structure is used in all SIOCxMIIxxx ioctl calls */
 struct mii_ioctl_data {
diff -urN linux-2.5.3-pre4/init/Config.help linux/init/Config.help
--- linux-2.5.3-pre4/init/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/init/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,117 @@
+CONFIG_EXPERIMENTAL
+  Some of the various things that Linux supports (such as network
+  drivers, file systems, network protocols, etc.) can be in a state
+  of development where the functionality, stability, or the level of
+  testing is not yet high enough for general use. This is usually
+  known as the "alpha-test" phase among developers. If a feature is
+  currently in alpha-test, then the developers usually discourage
+  uninformed widespread use of this feature by the general public to
+  avoid "Why doesn't this work?" type mail messages. However, active
+  testing and use of these systems is welcomed. Just be aware that it
+  may not meet the normal level of reliability or it may fail to work
+  in some special cases. Detailed bug reports from people familiar
+  with the kernel internals are usually welcomed by the developers
+  (before submitting bug reports, please read the documents
+  <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
+  <file:Documentation/BUG-HUNTING>, and
+  <file:Documentation/oops-tracing.txt> in the kernel source).
+
+  This option will also make obsoleted drivers available. These are
+  drivers that have been replaced by something else, and/or are
+  scheduled to be removed in a future kernel release.
+
+  Unless you intend to help test and develop a feature or driver that
+  falls into this category, or you have a situation that requires
+  using these features, you should probably say N here, which will
+  cause the configurator to present you with fewer choices. If
+  you say Y here, you will be offered the choice of using features or
+  drivers that are currently considered to be in the alpha-test phase.
+
+CONFIG_NET
+  Unless you really know what you are doing, you should say Y here.
+  The reason is that some programs need kernel networking support even
+  when running on a stand-alone machine that isn't connected to any
+  other computer. If you are upgrading from an older kernel, you
+  should consider updating your networking tools too because changes
+  in the kernel and the tools often go hand in hand. The tools are
+  contained in the package net-tools, the location and version number
+  of which are given in <file:Documentation/Changes>.
+
+  For a general introduction to Linux networking, it is highly
+  recommended to read the NET-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+CONFIG_SYSVIPC
+  Inter Process Communication is a suite of library functions and
+  system calls which let processes (running programs) synchronize and
+  exchange information. It is generally considered to be a good thing,
+  and some programs won't run unless you say Y here. In particular, if
+  you want to run the DOS emulator dosemu under Linux (read the
+  DOSEMU-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>), you'll need to say Y
+  here.
+
+  You can find documentation about IPC with "info ipc" and also in
+  section 6.4 of the Linux Programmer's Guide, available from
+  <http://www.linuxdoc.org/docs.html#guide>.
+
+CONFIG_BSD_PROCESS_ACCT
+  If you say Y here, a user level program will be able to instruct the
+  kernel (via a special system call) to write process accounting
+  information to a file: whenever a process exits, information about
+  that process will be appended to the file by the kernel.  The
+  information includes things such as creation time, owning user,
+  command name, memory usage, controlling terminal etc. (the complete
+  list is in the struct acct in <file:include/linux/acct.h>).  It is
+  up to the user level program to do useful things with this
+  information.  This is generally a good idea, so say Y.
+
+CONFIG_SYSCTL
+  The sysctl interface provides a means of dynamically changing
+  certain kernel parameters and variables on the fly without requiring
+  a recompile of the kernel or reboot of the system.  The primary
+  interface consists of a system call, but if you say Y to "/proc
+  file system support", a tree of modifiable sysctl entries will be
+  generated beneath the /proc/sys directory. They are explained in the
+  files in <file:Documentation/sysctl/>.  Note that enabling this
+  option will enlarge the kernel by at least 8 KB.
+
+  As it is generally a good thing, you should say Y here unless
+  building a kernel for install/rescue disks or your system is very
+  limited in memory.
+
+CONFIG_MODULES
+  Kernel modules are small pieces of compiled code which can be
+  inserted in or removed from the running kernel, using the programs
+  insmod and rmmod. This is described in the file
+  <file:Documentation/modules.txt>, including the fact that you have
+  to say "make modules" in order to compile the modules that you chose
+  during kernel configuration.  Modules can be device drivers, file
+  systems, binary executable formats, and so on. If you think that you
+  may want to make use of modules with this kernel in the future, then
+  say Y here.  If unsure, say Y.
+
+CONFIG_MODVERSIONS
+  Usually, modules have to be recompiled whenever you switch to a new
+  kernel.  Saying Y here makes it possible, and safe, to use the
+  same modules even after compiling a new kernel; this requires the
+  program modprobe. All the software needed for module support is in
+  the modutils package (check the file <file:Documentation/Changes>
+  for location and latest version).  NOTE: if you say Y here but don't
+  have the program genksyms (which is also contained in the above
+  mentioned modutils package), then the building of your kernel will
+  fail.  If you are going to use modules that are generated from
+  non-kernel sources, you would benefit from this option.  Otherwise
+  it's not that important.  So, N ought to be a safe bet.
+
+CONFIG_KMOD
+  Normally when you have selected some drivers and/or file systems to
+  be created as loadable modules, you also have the responsibility to
+  load the corresponding modules (using the programs insmod or
+  modprobe) before you can use them. If you say Y here however, the
+  kernel will be able to load modules for itself: when a part of the
+  kernel needs a module, it runs modprobe with the appropriate
+  arguments, thereby loading the module if it is available. (This is a
+  replacement for kerneld.) Say Y here and read about configuring it
+  in <file:Documentation/kmod.txt>.
+
diff -urN linux-2.5.3-pre4/init/Config.in linux/init/Config.in
--- linux-2.5.3-pre4/init/Config.in	Wed Dec 31 16:00:00 1969
+++ linux/init/Config.in	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,23 @@
+mainmenu_option next_comment
+comment 'General setup'
+
+bool 'Networking support' CONFIG_NET
+bool 'System V IPC' CONFIG_SYSVIPC
+bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
+bool 'Sysctl support' CONFIG_SYSCTL
+
+endmenu
+
+mainmenu_option next_comment
+comment 'Code maturity level options'
+bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
+endmenu
+
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
+   bool '  Kernel module loader' CONFIG_KMOD
+fi
+endmenu
diff -urN linux-2.5.3-pre4/kernel/device.c linux/kernel/device.c
--- linux-2.5.3-pre4/kernel/device.c	Thu Jan 24 12:35:17 2002
+++ linux/kernel/device.c	Thu Jan 24 12:35:38 2002
@@ -85,9 +85,7 @@
 
 	if (!dev)
 		return -EINVAL;
-
-	if (!valid_device(dev))
-		return -EFAULT;
+	get_device(dev);
 
 	new_entry = kmalloc(sizeof(*new_entry),GFP_KERNEL);
 	if (!new_entry)
@@ -110,15 +108,11 @@
  */
 void device_remove_file(struct device * dev, const char * name)
 {
-	if (!dev)
-		return;
-
-	if (!valid_device(dev))
-		return;
-
-	driverfs_remove_file(&dev->dir,name);
-
-	put_device(dev);
+	if (dev) {
+		get_device(dev);
+		driverfs_remove_file(&dev->dir,name);
+		put_device(dev);
+	}
 }
 
 /**
@@ -204,50 +198,35 @@
  */
 int device_register(struct device *dev)
 {
-	struct iobus * parent;
-	int error = -EFAULT;
+	int error;
 
-	if (!dev)
+	if (!dev || !strlen(dev->bus_id))
 		return -EINVAL;
+	BUG_ON(!dev->parent);
 
-	if (!dev->parent)
-		dev->parent = &device_root;
-	parent = dev->parent;
+	spin_lock(&device_lock);
+	INIT_LIST_HEAD(&dev->node);
+	spin_lock_init(&dev->lock);
+	atomic_set(&dev->refcount,2);
+
+	get_iobus(dev->parent);
+	list_add_tail(&dev->node,&dev->parent->devices);
+	spin_unlock(&device_lock);
 
 	DBG("DEV: registering device: ID = '%s', name = %s, parent = %s\n",
 	    dev->bus_id, dev->name, parent->bus_id);
 
-	if (valid_iobus(parent)) {
-		if (!valid_device(dev)) {
-			put_iobus(parent);
-			goto register_done;
-		}
-	} else
-		return -EFAULT;
-
-	if (!strlen(dev->name)) {
-		error = -EINVAL;
-		goto register_done;
-	}
-
-	error = device_make_dir(dev);
-	if (error)
+	if ((error = device_make_dir(dev)))
 		goto register_done;
 
-
-	/* finally add it to its parent's list */
-	lock_iobus(parent);
-	list_add_tail(&dev->node, &parent->devices);
-	unlock_iobus(parent);
-
 	/* notify platform of device entry */
 	if (platform_notify)
 		platform_notify(dev);
 
  register_done:
 	put_device(dev);
-	put_iobus(parent);
-
+	if (error)
+		put_iobus(dev->parent);
 	return error;
 }
 
@@ -265,23 +244,14 @@
  */
 void put_device(struct device * dev)
 {
-	struct iobus * parent;
-
-	if (!atomic_dec_and_lock(&dev->refcount,&dev->lock))
+	if (!atomic_dec_and_lock(&dev->refcount,&device_lock))
 		return;
-
-	parent = dev->parent;
-	dev->parent = NULL;
-	unlock_device(dev);
+	list_del_init(&dev->node);
+	spin_unlock(&device_lock);
 
 	DBG("DEV: Unregistering device. ID = '%s', name = '%s'\n",
 	    dev->bus_id,dev->name);
 
-	/* disavow parent's knowledge */
-	lock_iobus(parent);
-	list_del_init(&dev->node);
-	unlock_iobus(parent);
-
 	/* remove the driverfs directory */
 	device_remove_dir(dev);
 
@@ -301,47 +271,39 @@
 	if (dev->driver && dev->driver->remove)
 		dev->driver->remove(dev,REMOVE_FREE_RESOURCES);
 
-	put_iobus(parent);
+	put_iobus(dev->parent);
 }
 
 int iobus_register(struct iobus *bus)
 {
-	struct iobus * parent;
-	int error = -EINVAL;
+	int error;
 
-	if (!bus)
+	if (!bus || !strlen(bus->bus_id))
 		return -EINVAL;
+	
+	spin_lock(&device_lock);
+	atomic_set(&bus->refcount,2);
+	spin_lock_init(&bus->lock);
+	INIT_LIST_HEAD(&bus->node);
+	INIT_LIST_HEAD(&bus->devices);
+	INIT_LIST_HEAD(&bus->children);
 
-	if (!bus->parent)
-		bus->parent = &device_root;
-	parent = bus->parent;
+	if (bus != &device_root) {
+		if (!bus->parent)
+			bus->parent = &device_root;
+		get_iobus(bus->parent);
+		list_add_tail(&bus->node,&bus->parent->children);
+	}
+	spin_unlock(&device_lock);
 
 	DBG("DEV: registering bus. ID = '%s' name = '%s' parent = %p\n",
 	    bus->bus_id,bus->name,bus->parent);
 
-	if (valid_iobus(parent)) {
-		if (!valid_iobus(bus)) {
-			put_iobus(parent);
-			goto register_done;
-		}
-	} else
-		goto register_done;
-
-	if (!strlen(bus->bus_id))
-		goto register_done_put;
-
 	error = iobus_make_dir(bus);
-	if (error)
-		goto register_done_put;
-
-	lock_iobus(parent);
-	list_add_tail(&bus->node,&parent->children);
-	unlock_iobus(parent);
 
- register_done_put:
 	put_iobus(bus);
-	put_iobus(parent);
- register_done:
+	if (error && bus->parent)
+		put_iobus(bus->parent);
 	return error;
 }
 
@@ -355,88 +317,18 @@
  */
 void put_iobus(struct iobus * iobus)
 {
-	struct iobus * parent;
-
-	if (!atomic_dec_and_lock(&iobus->refcount,&iobus->lock))
+	if (!atomic_dec_and_lock(&iobus->refcount,&device_lock))
 		return;
-
-	parent = iobus->parent;
-	iobus->parent = NULL;
-	unlock_iobus(iobus);
+	list_del_init(&iobus->node);
+	spin_unlock(&device_lock);
 
 	if (!list_empty(&iobus->devices) ||
 	    !list_empty(&iobus->children))
 		BUG();
 
-	/* disavow parent's knowledge */
-	if (parent) {
-		lock_iobus(parent);
-		list_del(&iobus->node);
-		unlock_iobus(parent);
-
-		put_iobus(parent);
-	}
-
+	put_iobus(iobus->parent);
 	/* unregister itself */
 	put_device(iobus->self);
-
-	return;
-}
-
-/**
- * device_init_dev - initialise a struct device
- * @dev:	pointer to device struct
- */
-void device_init_dev(struct device * dev)
-{
-	INIT_LIST_HEAD(&dev->node);
-	spin_lock_init(&dev->lock);
-	atomic_set(&dev->refcount,1);
-}
-
-/**
- * device_alloc_dev - allocate and initialise a device structure
- *
- */
-struct device * device_alloc(void)
-{
-	struct device * dev;
-
-	dev = kmalloc(sizeof(struct device), GFP_KERNEL);
-
-	if (!dev)
-		return NULL;
-
-	memset(dev,0,sizeof(struct device));
-	device_init_dev(dev);
-
-	return dev;
-}
-
-void iobus_init(struct iobus *bus)
-{
-	spin_lock_init(&bus->lock);
-	atomic_set(&bus->refcount,1);
-
-	INIT_LIST_HEAD(&bus->node);
-	INIT_LIST_HEAD(&bus->children);
-	INIT_LIST_HEAD(&bus->devices);
-}
-
-struct iobus *iobus_alloc(void)
-{
-	struct iobus *bus;
-
-	bus = kmalloc(sizeof(struct iobus), GFP_KERNEL);
-
-	if (!bus)
-		return NULL;
-
-	memset(bus,0,sizeof(struct iobus));
-
-	iobus_init(bus);
-
-	return bus;
 }
 
 /**
@@ -588,13 +480,7 @@
 static int __init device_init_root(void)
 {
 	/* initialize parent bus lists */
-	iobus_init(&device_root);
-
-	/* don't call iobus_register, as the only thing it really
-	 * needs to do is create the root directory. Easier
-	 * to just do it here than special case it elsewhere..
-	 */
-	return iobus_make_dir(&device_root);
+	return iobus_register(&device_root);
 }
 
 int __init device_driver_init(void)
@@ -635,14 +521,7 @@
 __setup("device=",device_setup);
 
 EXPORT_SYMBOL(device_register);
-EXPORT_SYMBOL(device_alloc);
-EXPORT_SYMBOL(device_init_dev);
-
 EXPORT_SYMBOL(device_create_file);
 EXPORT_SYMBOL(device_remove_file);
-
 EXPORT_SYMBOL(iobus_register);
-EXPORT_SYMBOL(iobus_alloc);
-EXPORT_SYMBOL(iobus_init);
-
 EXPORT_SYMBOL(device_driver_init);
diff -urN linux-2.5.3-pre4/lib/Config.help linux/lib/Config.help
--- linux-2.5.3-pre4/lib/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/lib/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,6 @@
+CONFIG_CRC32
+  This option is provided for the case where no in-kernel-tree
+  modules require CRC32 functions, but a module built outside the
+  kernel tree does. Such modules that use library CRC32 functions
+  require M here.
+
diff -urN linux-2.5.3-pre4/net/Config.help linux/net/Config.help
--- linux-2.5.3-pre4/net/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,509 @@
+CONFIG_FILTER
+  The Linux Socket Filter is derived from the Berkeley Packet Filter.
+  If you say Y here, user-space programs can attach a filter to any
+  socket and thereby tell the kernel that it should allow or disallow
+  certain types of data to get through the socket.  Linux Socket
+  Filtering works on all socket types except TCP for now.  See the
+  text file <file:Documentation/networking/filter.txt> for more
+  information.
+
+  You need to say Y here if you want to use PPP packet filtering
+  (see the CONFIG_PPP_FILTER option below).
+
+  If unsure, say N.
+
+CONFIG_NETFILTER
+  Netfilter is a framework for filtering and mangling network packets
+  that pass through your Linux box.
+
+  The most common use of packet filtering is to run your Linux box as
+  a firewall protecting a local network from the Internet. The type of
+  firewall provided by this kernel support is called a "packet
+  filter", which means that it can reject individual network packets
+  based on type, source, destination etc. The other kind of firewall,
+  a "proxy-based" one, is more secure but more intrusive and more
+  bothersome to set up; it inspects the network traffic much more
+  closely, modifies it and has knowledge about the higher level
+  protocols, which a packet filter lacks. Moreover, proxy-based
+  firewalls often require changes to the programs running on the local
+  clients. Proxy-based firewalls don't need support by the kernel, but
+  they are often combined with a packet filter, which only works if
+  you say Y here.
+
+  You should also say Y here if you intend to use your Linux box as
+  the gateway to the Internet for a local network of machines without
+  globally valid IP addresses. This is called "masquerading": if one
+  of the computers on your local network wants to send something to
+  the outside, your box can "masquerade" as that computer, i.e. it
+  forwards the traffic to the intended outside destination, but
+  modifies the packets to make it look like they came from the
+  firewall box itself. It works both ways: if the outside host
+  replies, the Linux box will silently forward the traffic to the
+  correct local computer. This way, the computers on your local net
+  are completely invisible to the outside world, even though they can
+  reach the outside and can receive replies. It is even possible to
+  run globally visible servers from within a masqueraded local network
+  using a mechanism called portforwarding. Masquerading is also often
+  called NAT (Network Address Translation).
+
+  Another use of Netfilter is in transparent proxying: if a machine on
+  the local network tries to connect to an outside host, your Linux
+  box can transparently forward the traffic to a local server,
+  typically a caching proxy server.
+
+  Various modules exist for netfilter which replace the previous
+  masquerading (ipmasqadm), packet filtering (ipchains), transparent
+  proxying, and portforwarding mechanisms. Please see
+  <file:Documentation/Changes> under "iptables" for the location of
+  these packages.
+
+  Make sure to say N to "Fast switching" below if you intend to say Y
+  here, as Fast switching currently bypasses netfilter.
+
+  Chances are that you should say Y here if you compile a kernel which
+  will run as a router and N for regular hosts. If unsure, say N.
+
+CONFIG_NETFILTER_DEBUG
+  You can say Y here if you want to get additional messages useful in
+  debugging the netfilter code.
+
+CONFIG_INET
+  These are the protocols used on the Internet and on most local
+  Ethernets. It is highly recommended to say Y here (this will enlarge
+  your kernel by about 144 KB), since some programs (e.g. the X window
+  system) use TCP/IP even if your machine is not connected to any
+  other computer. You will get the so-called loopback device which
+  allows you to ping yourself (great fun, that!).
+
+  For an excellent introduction to Linux networking, please read the
+  NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  This option is also necessary if you want to use the full power of
+  term (term is a program which gives you almost full Internet
+  connectivity if you have a regular dial up shell account on some
+  Internet connected Unix computer; for more information, read
+  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+  If you say Y here and also to "/proc file system support" and
+  "Sysctl support" below, you can change various aspects of the
+  behavior of the TCP/IP code by writing to the (virtual) files in
+  /proc/sys/net/ipv4/*; the options are explained in the file
+  <file:Documentation/networking/ip-sysctl.txt>.
+
+  Short answer: say Y.
+
+CONFIG_UNIX
+  If you say Y here, you will include support for Unix domain sockets;
+  sockets are the standard Unix mechanism for establishing and
+  accessing network connections.  Many commonly used programs such as
+  the X Window system and syslog use these sockets even if your
+  machine is not connected to any network.  Unless you are working on
+  an embedded system or something similar, you therefore definitely
+  want to say Y here.
+
+  However, the socket support is also available as a module ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>. The module will be
+  called unix.o.  If you try building this as a module and you have
+  said Y to "Kernel module loader support" above, be sure to add
+  'alias net-pf-1 unix' to your /etc/modules.conf file. Note that
+  several important services won't work correctly if you say M here
+  and then neglect to load the module.
+
+  Say Y unless you know what you are doing.
+
+CONFIG_IPV6
+  This is experimental support for the next version of the Internet
+  Protocol: IP version 6 (also called IPng "IP next generation").
+  Features of this new protocol include: expanded address space,
+  authentication and privacy, and seamless interoperability with the
+  current version of IP (IP version 4). For general information about
+  IPv6, see <http://playground.sun.com/pub/ipng/html/ipng-main.html>;
+  for specific information about IPv6 under Linux read the HOWTO at
+  <http://www.bieringer.de/linux/IPv6/> and the file net/ipv6/README
+  in the kernel source.
+
+  If you want to use IPv6, please upgrade to the newest net-tools as
+  given in <file:Documentation/Changes>. You will still be able to do
+  regular IPv4 networking as well.
+
+  This protocol support is also available as a module ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want). The module will be called ipv6.o. If you want to compile it
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+  It is safe to say N here for now.
+
+CONFIG_IPX
+  This is support for the Novell networking protocol, IPX, commonly
+  used for local networks of Windows machines.  You need it if you
+  want to access Novell NetWare file or print servers using the Linux
+  Novell client ncpfs (available from
+  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
+  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
+  available from <http://www.linuxdoc.org/docs.html#howto>).  In order
+  to do the former, you'll also have to say Y to "NCP file system
+  support", below.
+
+  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
+  is similar to TCP. There is also experimental support for SPX in
+  Linux (see "SPX networking", below).
+
+  To turn your Linux box into a fully featured NetWare file server and
+  IPX router, say Y here and fetch either lwared from
+  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
+  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
+  information, read the IPX-HOWTO available from
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  General information about how to connect Linux, Windows machines and
+  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+  The IPX driver would enlarge your kernel by about 16 KB. This driver
+  is also available as a module ( = code which can be inserted in and
+  removed from the running kernel whenever you want).  The module will
+  be called ipx.o.  If you want to compile it as a module, say M here
+  and read <file:Documentation/modules.txt>.  Unless you want to
+  integrate your Linux box with a local Novell network, say N.
+
+CONFIG_DECNET
+  The DECnet networking protocol was used in many products made by
+  Digital (now Compaq).  It provides reliable stream and sequenced
+  packet communications over which run a variety of services similar
+  to those which run over TCP/IP.
+
+  To find some tools to use with the kernel layer support, please
+  look at Patrick Caulfield's web site:
+  <http://linux.dreamtime.org/decnet/>.
+
+  More detailed documentation is available in
+  <file:Documentation/networking/decnet.txt>.
+
+  Be sure to say Y to "/proc file system support" and "Sysctl support"
+  below when using DECnet, since you will need sysctl support to aid
+  in configuration at run time.
+
+  The DECnet code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called decnet.o.
+
+CONFIG_ATALK
+  AppleTalk is the way Apple computers speak to each other on a
+  network.  If your Linux box is connected to such a network and you
+  want to join the conversation, say Y.  You will need to use the
+  netatalk package so that your Linux box can act as a print and file
+  server for Macs as well as access AppleTalk printers.  Check out
+  <http://www.zettabyte.net/netatalk/> on the WWW for details.
+  EtherTalk is the name used for AppleTalk over Ethernet and the
+  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+  network using serial links.  EtherTalk and LocalTalk are fully
+  supported by Linux.
+
+  General information about how to connect Linux, Windows machines and
+  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
+  NET-3-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+  information as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module is called appletalk.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.  You
+  almost certainly want to compile it as a module so you can restart
+  your AppleTalk stack without rebooting your machine.  I hear that
+  the GNU boycott of Apple is over, so even politically correct people
+  are allowed to say Y here.
+
+CONFIG_X25
+  X.25 is a set of standardized network protocols, similar in scope to
+  frame relay; the one physical line from your box to the X.25 network
+  entry point can carry several logical point-to-point connections
+  (called "virtual circuits") to other computers connected to the X.25
+  network. Governments, banks, and other organizations tend to use it
+  to connect to each other or to form Wide Area Networks (WANs). Many
+  countries have public X.25 networks. X.25 consists of two
+  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+  if you want that) and the lower level data link layer protocol LAPB
+  (say Y to "LAPB Data Link Driver" below if you want that).
+
+  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+  <http://www.cisco.com/univercd/data/doc/software/11_0/rpcg/cx25.htm>.
+  Information about X.25 for Linux is contained in the files
+  <file:Documentation/networking/x25.txt> and
+  <file:Documentation/networking/x25-iface.txt>.
+
+  One connects to an X.25 network either with a dedicated network card
+  using the X.21 protocol (not yet supported by Linux) or one can do
+  X.25 over a standard telephone line using an ordinary modem (say Y
+  to "X.25 async driver" below) or over Ethernet using an ordinary
+  Ethernet card and either the 802.2 LLC protocol (say Y to "802.2
+  LLC" below) or LAPB over Ethernet (say Y to "LAPB Data Link Driver"
+  and "LAPB over Ethernet driver" below).
+
+  If you want to compile this driver as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called x25.o. If unsure, say N.
+
+CONFIG_LAPB
+  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+  the lower) part of the X.25 protocol. It offers a reliable
+  connection service to exchange data frames with one other host, and
+  it is used to transport higher level protocols (mostly X.25 Packet
+  Layer, the higher part of X.25, but others are possible as well).
+  Usually, LAPB is used with specialized X.21 network cards, but Linux
+  currently supports LAPB only over Ethernet connections. If you want
+  to use LAPB connections over Ethernet, say Y here and to "LAPB over
+  Ethernet driver" below. Read
+  <file:Documentation/networking/lapb-module.txt> for technical
+  details.
+
+  If you want to compile this driver as a module though ( = code which
+  can be inserted in and removed from the running kernel whenever you
+  want), say M here and read <file:Documentation/modules.txt>.  The
+  module will be called lapb.o.  If unsure, say N.
+
+CONFIG_LLC
+  This is a Logical Link Layer protocol used for X.25 connections over
+  Ethernet, using ordinary Ethernet cards.
+
+CONFIG_NET_DIVERT
+  The Frame Diverter allows you to divert packets from the
+  network, that are not aimed at the interface receiving it (in
+  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
+  with the Frames Diverter on, can do some *really* transparent www
+  caching using a Squid proxy for example.
+
+  This is very useful when you don't want to change your router's
+  config (or if you simply don't have access to it).
+
+  The other possible usages of diverting Ethernet Frames are
+  numberous:
+   - reroute smtp traffic to another interface
+   - traffic-shape certain network streams
+   - transparently proxy smtp connections
+   - etc...
+
+  For more informations, please refer to:
+    <http://diverter.sourceforge.net/>
+    <http://perso.wanadoo.fr/magpie/EtherDivert.html>
+
+  If unsure, say N.
+
+CONFIG_BRIDGE
+  If you say Y here, then your Linux box will be able to act as an
+  Ethernet bridge, which means that the different Ethernet segments it
+  is connected to will appear as one Ethernet to the participants.
+  Several such bridges can work together to create even larger
+  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+  As this is a standard, Linux bridges will cooperate properly with
+  other third party bridge products.
+
+  In order to use the Ethernet bridge, you'll need the bridge
+  configuration tools; see <file:Documentation/networking/bridge.txt>
+  for location. Please read the Bridge mini-HOWTO for more
+  information.
+
+  Note that if your box acts as a bridge, it probably contains several
+  Ethernet devices, but the kernel is not able to recognize more than
+  one at boot time without help; for details read the Ethernet-HOWTO,
+  available from in <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to compile this code as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want),
+  say M here and read <file:Documentation/modules.txt>.  The module
+  will be called bridge.o.
+
+  If unsure, say N.
+
+CONFIG_PACKET
+  The Packet protocol is used by applications which communicate
+  directly with network devices without an intermediate network
+  protocol implemented in the kernel, e.g. tcpdump.  If you want them
+  to work, choose Y.
+
+  This driver is also available as a module called af_packet.o ( =
+  code which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>; if you use modprobe
+  or kmod, you may also want to add "alias net-pf-17 af_packet" to
+  /etc/modules.conf.
+
+  If unsure, say Y.
+
+CONFIG_PACKET_MMAP
+  If you say Y here, the Packet protocol driver will use an IO
+  mechanism that results in faster communication.
+
+  If unsure, say N.
+
+CONFIG_NETLINK_DEV
+  This option will be removed soon. Any programs that want to use
+  character special nodes like /dev/tap0 or /dev/route (all with major
+  number 36) need this option, and need to be rewritten soon to use
+  the real netlink socket.
+  This is a backward compatibility option, choose Y for now.
+
+CONFIG_ATM
+  ATM is a high-speed networking technology for Local Area Networks
+  and Wide Area Networks.  It uses a fixed packet size and is
+  connection oriented, allowing for the negotiation of minimum
+  bandwidth requirements.
+
+  In order to participate in an ATM network, your Linux box needs an
+  ATM networking card. If you have that, say Y here and to the driver
+  of your ATM card below.
+
+  Note that you need a set of user-space programs to actually make use
+  of ATM.  See the file <file:Documentation/networking/atm.txt> for
+  further details.
+
+CONFIG_ATM_CLIP
+  Classical IP over ATM for PVCs and SVCs, supporting InARP and
+  ATMARP. If you want to communication with other IP hosts on your ATM
+  network, you will typically either say Y here or to "LAN Emulation
+  (LANE)" below.
+
+CONFIG_ATM_CLIP_NO_ICMP
+  Normally, an "ICMP host unreachable" message is sent if a neighbour
+  cannot be reached because there is no VC to it in the kernel's
+  ATMARP table. This may cause problems when ATMARP table entries are
+  briefly removed during revalidation. If you say Y here, packets to
+  such neighbours are silently discarded instead.
+
+CONFIG_ATM_LANE
+  LAN Emulation emulates services of existing LANs across an ATM
+  network. Besides operating as a normal ATM end station client, Linux
+  LANE client can also act as an proxy client bridging packets between
+  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+CONFIG_ATM_MPOA
+  Multi-Protocol Over ATM allows ATM edge devices such as routers,
+  bridges and ATM attached hosts establish direct ATM VCs across
+  subnetwork boundaries. These shortcut connections bypass routers
+  enhancing overall network performance.
+
+CONFIG_ECONET
+  Econet is a fairly old and slow networking protocol mainly used by
+  Acorn computers to access file and print servers. It uses native
+  Econet network cards. AUN is an implementation of the higher level
+  parts of Econet that runs over ordinary Ethernet connections, on
+  top of the UDP packet protocol, which in turn runs on top of the
+  Internet protocol IP.
+
+  If you say Y here, you can choose with the next two options whether
+  to send Econet/AUN traffic over a UDP Ethernet connection or over
+  a native Econet network card.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called econet.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ECONET_AUNUDP
+  Say Y here if you want to send Econet/AUN traffic over a UDP
+  connection (UDP is a packet based protocol that runs on top of the
+  Internet protocol IP) using an ordinary Ethernet network card.
+
+CONFIG_ECONET_NATIVE
+  Say Y here if you have a native Econet network card installed in
+  your computer.
+
+CONFIG_WAN_ROUTER
+  Wide Area Networks (WANs), such as X.25, frame relay and leased
+  lines, are used to interconnect Local Area Networks (LANs) over vast
+  distances with data transfer rates significantly higher than those
+  achievable with commonly used asynchronous modem connections.
+  Usually, a quite expensive external device called a `WAN router' is
+  needed to connect to a WAN.
+
+  As an alternative, WAN routing can be built into the Linux kernel.
+  With relatively inexpensive WAN interface cards available on the
+  market, a perfectly usable router can be built for less than half
+  the price of an external router.  If you have one of those cards and
+  wish to use your Linux box as a WAN router, say Y here and also to
+  the WAN driver for your card, below.  You will then need the
+  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
+  Read <file:Documentation/networking/wan-router.txt> for more
+  information.
+
+  The WAN routing support is also available as a module called
+  wanrouter.o ( = code which can be inserted in and removed from the
+  running kernel whenever you want).  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If unsure, say N.
+
+CONFIG_NET_FASTROUTE
+  Saying Y here enables direct NIC-to-NIC (NIC = Network Interface
+  Card) data transfers on the local network, which is fast.
+
+  IMPORTANT NOTE: This option is NOT COMPATIBLE with "Network packet
+  filtering" (CONFIG_NETFILTER). Say N here if you say Y there.
+
+  However, it will work with all options in the "Advanced router"
+  section (except for "Use TOS value as routing key" and
+  "Use FWMARK value as routing key").
+
+  At the moment, few devices support fast switching (tulip is one of
+  them, a modified 8390 driver can be found at
+  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
+
+  If unsure, say N.
+
+CONFIG_NET_HW_FLOWCONTROL
+  This option enables NIC (Network Interface Card) hardware throttling
+  during periods of extremal congestion. At the moment only a couple
+  of device drivers support it (really only one -- tulip, a modified
+  8390 driver can be found at
+  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
+
+  Really, this option is applicable to any machine attached to a fast
+  enough network, and even a 10 Mb NIC is able to kill a not very slow
+  box, such as a 120MHz Pentium.
+
+  However, do not say Y here if you did not experience any serious
+  problems.
+
+CONFIG_NET_SCHED
+  When the kernel has several packets to send out over a network
+  device, it has to decide which ones to send first, which ones to
+  delay, and which ones to drop. This is the job of the packet
+  scheduler, and several different algorithms for how to do this
+  "fairly" have been proposed.
+
+  If you say N here, you will get the standard packet scheduler, which
+  is a FIFO (first come, first served). If you say Y here, you will be
+  able to choose from among several alternative algorithms which can
+  then be attached to different network devices. This is useful for
+  example if some of your network devices are real time devices that
+  need a certain minimum data flow rate, or if you need to limit the
+  maximum data flow rate for traffic which matches specified criteria.
+  This code is considered to be experimental.
+
+  To administer these schedulers, you'll need the user-level utilities
+  from the package iproute2+tc at <ftp://ftp.inr.ac.ru/ip-routing/>.
+  That package also contains some documentation; for more, check out
+  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
+
+  This Quality of Service (QoS) support will enable you to use
+  Differentiated Services (diffserv) and Resource Reservation Protocol
+  (RSVP) on your Linux router if you also say Y to "QoS support",
+  "Packet classifier API" and to some classifiers below. Documentation
+  and software is at <http://icawww1.epfl.ch/linux-diffserv/>.
+
+  If you say Y here and to "/proc file system" below, you will be able
+  to read status information about packet schedulers from the file
+  /proc/net/psched.
+
+  The available schedulers are listed in the following questions; you
+  can say Y to as many as you like. If unsure, say N now.
+
+CONFIG_NET_PROFILE
+  If you say Y here and to "/proc file system support" below, some
+  obscure and undocumented information about the network code's
+  performance will be written to /proc/net/profile. If you don't know
+  what it is about, you don't need it: say N.
+
diff -urN linux-2.5.3-pre4/net/ax25/Config.help linux/net/ax25/Config.help
--- linux-2.5.3-pre4/net/ax25/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/ax25/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,88 @@
+CONFIG_HAMRADIO
+  If you want to connect your Linux box to an amateur radio, answer Y
+  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+  the AX25-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about amateur radio.
+
+CONFIG_AX25
+  This is the protocol used for computer communication over amateur
+  radio. It is either used by itself for point-to-point links, or to
+  carry other protocols such as tcp/ip. To use it, you need a device
+  that connects your Linux box to your amateur radio. You can either
+  use a low speed TNC (a Terminal Node Controller acts as a kind of
+  modem connecting your computer's serial port to your radio's
+  microphone input and speaker output) supporting the KISS protocol or
+  one of the various SCC cards that are supported by the generic Z8530
+  or the DMA SCC driver. Another option are the Baycom modem serial
+  and parallel port hacks or the sound card modem (supported by their
+  own drivers). If you say Y here, you also have to say Y to one of
+  those drivers.
+
+  Information about where to get supporting software for Linux amateur
+  radio as well as information about how to configure an AX.25 port is
+  contained in the AX25-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You might also want to
+  check out the file <file:Documentation/networking/ax25.txt> in the
+  kernel source. More information about digital amateur radio in
+  general is on the WWW at
+  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ax25.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_AX25_DAMA_SLAVE
+  DAMA is a mechanism to prevent collisions when doing AX.25
+  networking. A DAMA server (called "master") accepts incoming traffic
+  from clients (called "slaves") and redistributes it to other slaves.
+  If you say Y here, your Linux box will act as a DAMA slave; this is
+  transparent in that you don't have to do any special DAMA
+  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+  say N.
+
+CONFIG_AX25_DAMA_MASTER
+  DAMA is a mechanism to prevent collisions when doing AX.25
+  networking. A DAMA server (called "master") accepts incoming traffic
+  from clients (called "slaves") and redistributes it to other
+  slaves. If you say Y here, your Linux box will act as a DAMA server.
+  If unsure, say N.
+
+CONFIG_NETROM
+  NET/ROM is a network layer protocol on top of AX.25 useful for
+  routing.
+
+  A comprehensive listing of all the software for Linux amateur radio
+  users as well as information about how to configure an AX.25 port is
+  contained in the AX25-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. You also might want to
+  check out the file <file:Documentation/networking/ax25.txt>. More
+  information about digital amateur radio in general is on the WWW at
+  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called netrom.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_ROSE
+  The Packet Layer Protocol (PLP) is a way to route packets over X.25
+  connections in general and amateur radio AX.25 connections in
+  particular, essentially an alternative to NET/ROM.
+
+  A comprehensive listing of all the software for Linux amateur radio
+  users as well as information about how to configure an AX.25 port is
+  contained in the AX25-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>.  You also might want to
+  check out the file <file:Documentation/networking/ax25.txt>. More
+  information about digital amateur radio in general is on the WWW at
+  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rose.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/net/bluetooth/Config.help linux/net/bluetooth/Config.help
--- linux-2.5.3-pre4/net/bluetooth/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/bluetooth/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,30 @@
+CONFIG_BLUEZ
+  Bluetooth is low-cost, low-power, short-range wireless technology.
+  It was designed as a replacement for cables and other short-range
+  technologies like IrDA.  Bluetooth operates in personal area range
+  that typically extends up to 10 meters.  More information about
+  Bluetooth can be found at <http://www.bluetooth.com/>.
+
+  Linux Bluetooth subsystem consist of several layers:
+               HCI Core (device and connection manager, scheduler)
+               HCI Device drivers (interface to the hardware)
+               L2CAP Module (L2CAP protocol)
+
+  Say Y here to enable Linux Bluetooth support and to build HCI Core
+  layer.
+
+  To use Linux Bluetooth subsystem, you will need several user-space
+  utilities like hciconfig and hcid.  These utilities and updates to
+  Bluetooth kernel modules are provided in the BlueZ package.
+  For more information, see <http://bluez.sourceforge.net/>.
+
+  If you want to compile HCI Core as module (hci.o) say M here.
+
+CONFIG_BLUEZ_L2CAP
+  L2CAP (Logical Link Control and Adaptation Protocol) provides
+  connection oriented and connection-less data transport.  L2CAP
+  support is required for most Bluetooth applications.
+
+  Say Y here to compile L2CAP support into the kernel or say M to
+  compile it as module (l2cap.o).
+
diff -urN linux-2.5.3-pre4/net/decnet/Config.help linux/net/decnet/Config.help
--- linux-2.5.3-pre4/net/decnet/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/decnet/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,25 @@
+CONFIG_DECNET_SIOCGIFCONF
+  This option should only be turned on if you are really sure that
+  you know what you are doing. It can break other applications which
+  use this system call and the proper way to get the information
+  provided by this call is to use rtnetlink.
+
+  If unsure, say N.
+
+CONFIG_DECNET_ROUTER
+  Add support for turning your DECnet Endnode into a level 1 or 2
+  router.  This is an unfinished option for developers only.  If you
+  do say Y here, then make sure that you also say Y to "Kernel/User
+  network link driver", "Routing messages" and "Network packet
+  filtering".  The first two are required to allow configuration via
+  rtnetlink (currently you need Alexey Kuznetsov's iproute2 package
+  from <ftp://ftp.inr.ac.ru/>). The "Network packet filtering" option
+  will be required for the forthcoming routing daemon to work.
+
+  See <file:Documentation/networking/decnet.txt> for more information.
+
+CONFIG_DECNET_ROUTE_FWMARK
+  If you say Y here, you will be able to specify different routes for
+  packets with different FWMARK ("firewalling mark") values
+  (see ipchains(8), "-m" argument).
+
diff -urN linux-2.5.3-pre4/net/ipv4/Config.help linux/net/ipv4/Config.help
--- linux-2.5.3-pre4/net/ipv4/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/ipv4/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,279 @@
+CONFIG_INET_ECN
+  Explicit Congestion Notification (ECN) allows routers to notify
+  clients about network congestion, resulting in fewer dropped packets
+  and increased network performance.  This option adds ECN support to
+  the Linux kernel, as well as a sysctl (/proc/sys/net/ipv4/tcp_ecn)
+  which allows ECN support to be disabled at runtime.
+
+  Note that, on the Internet, there are many broken firewalls which
+  refuse connections from ECN-enabled machines, and it may be a while
+  before these firewalls are fixed.  Until then, to access a site
+  behind such a firewall (some of which are major sites, at the time
+  of this writing) you will have to disable this option, either by
+  saying N now or by using the sysctl.
+
+  If in doubt, say N.
+
+CONFIG_SYN_COOKIES
+  Normal TCP/IP networking is open to an attack known as "SYN
+  flooding". This denial-of-service attack prevents legitimate remote
+  users from being able to connect to your computer during an ongoing
+  attack and requires very little work from the attacker, who can
+  operate from anywhere on the Internet.
+
+  SYN cookies provide protection against this type of attack. If you
+  say Y here, the TCP/IP stack will use a cryptographic challenge
+  protocol known as "SYN cookies" to enable legitimate users to
+  continue to connect, even when your machine is under attack. There
+  is no need for the legitimate users to change their TCP/IP software;
+  SYN cookies work transparently to them. For technical information
+  about SYN cookies, check out <http://cr.yp.to/syncookies.html>.
+
+  If you are SYN flooded, the source address reported by the kernel is
+  likely to have been forged by the attacker; it is only reported as
+  an aid in tracing the packets to their actual source and should not
+  be taken as absolute truth.
+
+  SYN cookies may prevent correct error reporting on clients when the
+  server is really overloaded. If this happens frequently better turn
+  them off.
+
+  If you say Y here, note that SYN cookies aren't enabled by default;
+  you can enable them by saying Y to "/proc file system support" and
+  "Sysctl support" below and executing the command
+
+    echo 1 >/proc/sys/net/ipv4/tcp_syncookies
+
+  at boot time after the /proc file system has been mounted.
+
+  If unsure, say N.
+
+CONFIG_ARPD
+  Normally, the kernel maintains an internal cache which maps IP
+  addresses to hardware addresses on the local network, so that
+  Ethernet/Token Ring/ etc. frames are sent to the proper address on
+  the physical networking layer. For small networks having a few
+  hundred directly connected hosts or less, keeping this address
+  resolution (ARP) cache inside the kernel works well. However,
+  maintaining an internal ARP cache does not work well for very large
+  switched networks, and will use a lot of kernel memory if TCP/IP
+  connections are made to many machines on the network.
+
+  If you say Y here, the kernel's internal ARP cache will never grow
+  to more than 256 entries (the oldest entries are expired in a LIFO
+  manner) and communication will be attempted with the user space ARP
+  daemon arpd. Arpd then answers the address resolution request either
+  from its own cache or by asking the net.
+
+  This code is experimental and also obsolete. If you want to use it,
+  you need to find a version of the daemon arpd on the net somewhere,
+  and you should also say Y to "Kernel/User network link driver",
+  below. If unsure, say N.
+
+CONFIG_IP_MULTICAST
+  This is code for addressing several networked computers at once,
+  enlarging your kernel by about 2 KB. You need multicasting if you
+  intend to participate in the MBONE, a high bandwidth network on top
+  of the Internet which carries audio and video broadcasts. More
+  information about the MBONE is on the WWW at
+  <http://www-itg.lbl.gov/mbone/>. Information about the multicast
+  capabilities of the various network cards is contained in
+  <file:Documentation/networking/multicast.txt>. For most people, it's
+  safe to say N.
+
+CONFIG_IP_ADVANCED_ROUTER
+  If you intend to run your Linux box mostly as a router, i.e. as a
+  computer that forwards and redistributes network packets, say Y; you
+  will then be presented with several options that allow more precise
+  control about the routing process.
+
+  The answer to this question won't directly affect the kernel:
+  answering N will just cause the configurator to skip all the
+  questions about advanced routing.
+
+  Note that your box can only act as a router if you enable IP
+  forwarding in your kernel; you can do that by saying Y to "/proc
+  file system support" and "Sysctl support" below and executing the
+  line
+
+    echo "1" > /proc/sys/net/ipv4/ip_forward
+
+  at boot time after the /proc file system has been mounted.
+
+  If you turn on IP forwarding, you will also get the rp_filter, which
+  automatically rejects incoming packets if the routing table entry
+  for their source address doesn't match the network interface they're
+  arriving on. This has security advantages because it prevents the
+  so-called IP spoofing, however it can pose problems if you use
+  asymmetric routing (packets from you to a host take a different path
+  than packets from that host to you) or if you operate a non-routing
+  host which has several IP addresses on different interfaces. To turn
+  rp_filter off use:
+
+        echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter
+  or
+        echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
+
+  If unsure, say N here.
+
+CONFIG_IP_MULTIPLE_TABLES
+  Normally, a router decides what to do with a received packet based
+  solely on the packet's final destination address. If you say Y here,
+  the Linux router will also be able to take the packet's source
+  address into account. Furthermore, if you also say Y to "Use TOS
+  value as routing key" below, the TOS (Type-Of-Service) field of the
+  packet can be used for routing decisions as well. In addition, if
+  you say Y here and to "Fast network address translation" below,
+  the router will also be able to modify source and destination
+  addresses of forwarded packets.
+
+  If you are interested in this, please see the preliminary
+  documentation at <http://www.compendium.com.ar/policy-routing.txt>
+  and <ftp://post.tepkom.ru/pub/vol2/Linux/docs/advanced-routing.tex>.
+  You will need supporting software from
+  <ftp://ftp.inr.ac.ru/ip-routing/>.
+
+  If unsure, say N.
+
+CONFIG_IP_ROUTE_MULTIPATH
+  Normally, the routing tables specify a single action to be taken in
+  a deterministic manner for a given packet. If you say Y here
+  however, it becomes possible to attach several actions to a packet
+  pattern, in effect specifying several alternative paths to travel
+  for those packets. The router considers all these paths to be of
+  equal "cost" and chooses one of them in a non-deterministic fashion
+  if a matching packet arrives.
+
+CONFIG_IP_ROUTE_TOS
+  The header of every IP packet carries a TOS (Type Of Service) value
+  with which the packet requests a certain treatment, e.g. low
+  latency (for interactive traffic), high throughput, or high
+  reliability.  If you say Y here, you will be able to specify
+  different routes for packets with different TOS values.
+
+CONFIG_IP_ROUTE_FWMARK
+  If you say Y here, you will be able to specify different routes for
+  packets with different mark values (see iptables(8), MARK target).
+
+CONFIG_IP_ROUTE_VERBOSE
+  If you say Y here, which is recommended, then the kernel will print
+  verbose messages regarding the routing, for example warnings about
+  received packets which look strange and could be evidence of an
+  attack or a misconfigured system somewhere. The information is
+  handled by the klogd daemon which is responsible for kernel messages
+  ("man klogd").
+
+CONFIG_IP_ROUTE_LARGE_TABLES
+  If you have routing zones that grow to more than about 64 entries,
+  you may want to say Y here to speed up the routing process.
+
+CONFIG_IP_ROUTE_NAT
+  If you say Y here, your router will be able to modify source and
+  destination addresses of packets that pass through it, in a manner
+  you specify.  General information about Network Address Translation
+  can be gotten from the document
+  <http://www.csn.tu-chemnitz.de/~mha/linux-ip-nat/diplom/nat.html>.
+
+CONFIG_IP_PNP
+  This enables automatic configuration of IP addresses of devices and
+  of the routing table during kernel boot, based on either information
+  supplied on the kernel command line or by BOOTP or RARP protocols.
+  You need to say Y only for diskless machines requiring network
+  access to boot (in which case you want to say Y to "Root file system
+  on NFS" as well), because all other machines configure the network
+  in their startup scripts.
+
+CONFIG_IP_PNP_BOOTP
+  If you want your Linux box to mount its whole root file system (the
+  one containing the directory /) from some other computer over the
+  net via NFS and you want the IP address of your computer to be
+  discovered automatically at boot time using the BOOTP protocol (a
+  special protocol designed for doing this job), say Y here. In case
+  the boot ROM of your network card was designed for booting Linux and
+  does BOOTP itself, providing all necessary information on the kernel
+  command line, you can say N here. If unsure, say Y. Note that if you
+  want to use BOOTP, a BOOTP server must be operating on your network.
+  Read <file:Documentation/nfsroot.txt> for details.
+
+CONFIG_IP_PNP_DHCP
+  If you want your Linux box to mount its whole root file system (the
+  one containing the directory /) from some other computer over the
+  net via NFS and you want the IP address of your computer to be
+  discovered automatically at boot time using the DHCP protocol (a
+  special protocol designed for doing this job), say Y here. In case
+  the boot ROM of your network card was designed for booting Linux and
+  does DHCP itself, providing all necessary information on the kernel
+  command line, you can say N here.
+
+  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
+  must be operating on your network.  Read
+  <file:Documentation/nfsroot.txt> for details.
+
+CONFIG_IP_PNP_RARP
+  If you want your Linux box to mount its whole root file system (the
+  one containing the directory /) from some other computer over the
+  net via NFS and you want the IP address of your computer to be
+  discovered automatically at boot time using the RARP protocol (an
+  older protocol which is being obsoleted by BOOTP and DHCP), say Y
+  here. Note that if you want to use RARP, a RARP server must be
+  operating on your network. Read <file:Documentation/nfsroot.txt> for
+  details.
+
+CONFIG_NET_IPIP
+  Tunneling means encapsulating data of one protocol type within
+  another protocol and sending it over a channel that understands the
+  encapsulating protocol. This particular tunneling driver implements
+  encapsulation of IP within IP, which sounds kind of pointless, but
+  can be useful if you want to make your (or some other) machine
+  appear on a different network than it physically is, or to use
+  mobile-IP facilities (allowing laptops to seamlessly move between
+  networks without changing their IP addresses; check out
+  <http://anchor.cs.binghamton.edu/~mobileip/LJ/index.html>).
+
+  Saying Y to this option will produce two modules ( = code which can
+  be inserted in and removed from the running kernel whenever you
+  want). Most people won't need this and can say N.
+
+CONFIG_NET_IPGRE
+  Tunneling means encapsulating data of one protocol type within
+  another protocol and sending it over a channel that understands the
+  encapsulating protocol. This particular tunneling driver implements
+  GRE (Generic Routing Encapsulation) and at this time allows
+  encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
+  This driver is useful if the other endpoint is a Cisco router: Cisco
+  likes GRE much better than the other Linux tunneling driver ("IP
+  tunneling" above). In addition, GRE allows multicast redistribution
+  through the tunnel.
+
+CONFIG_NET_IPGRE_BROADCAST
+  One application of GRE/IP is to construct a broadcast WAN (Wide Area
+  Network), which looks like a normal Ethernet LAN (Local Area
+  Network), but can be distributed all over the Internet. If you want
+  to do that, say Y here and to "IP multicast routing" below.
+
+CONFIG_IP_MROUTE
+  This is used if you want your machine to act as a router for IP
+  packets that have several destination addresses. It is needed on the
+  MBONE, a high bandwidth network on top of the Internet which carries
+  audio and video broadcasts. In order to do that, you would most
+  likely run the program mrouted. Information about the multicast
+  capabilities of the various network cards is contained in
+  <file:Documentation/networking/multicast.txt>. If you haven't heard
+  about it, you don't need it.
+
+CONFIG_IP_PIMSM_V1
+  Kernel side support for Sparse Mode PIM (Protocol Independent
+  Multicast) version 1. This multicast routing protocol is used widely
+  because Cisco supports it. You need special software to use it
+  (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more
+  information about PIM.
+
+  Say Y if you want to use PIM-SM v1. Note that you can say N here if
+  you just want to use Dense Mode PIM.
+
+CONFIG_IP_PIMSM_V2
+  Kernel side support for Sparse Mode PIM version 2. In order to use
+  this, you need an experimental routing daemon supporting it (pimd or
+  gated-5). This routing protocol is not used widely, so say N unless
+  you want to play with it.
+
diff -urN linux-2.5.3-pre4/net/ipv4/netfilter/Config.help linux/net/ipv4/netfilter/Config.help
--- linux-2.5.3-pre4/net/ipv4/netfilter/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/ipv4/netfilter/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,292 @@
+CONFIG_IP_NF_CONNTRACK
+  Connection tracking keeps a record of what packets have passed
+  through your machine, in order to figure out how they are related
+  into connections.
+
+  This is required to do Masquerading or other kinds of Network
+  Address Translation (except for Fast NAT).  It can also be used to
+  enhance packet filtering (see `Connection state match support'
+  below).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_IRC
+  There is a commonly-used extension to IRC called
+  Direct Client-to-Client Protocol (DCC).  This enables users to send
+  files to each other, and also chat to each other without the need
+  of a server.  DCC Sending is used anywhere you send files over IRC,
+  and DCC Chat is most commonly used by Eggdrop bots.  If you are
+  using NAT, this extension will enable you to send files and initiate
+  chats.  Note that you do NOT need this extension to get files or
+  have others initiate chats, or everything else in IRC.
+
+  If you want to compile it as a module, say 'M' here and read
+  Documentation/modules.txt.  If unsure, say 'N'.
+
+CONFIG_IP_NF_FTP
+  Tracking FTP connections is problematic: special helpers are
+  required for tracking them, and doing masquerading and other forms
+  of Network Address Translation on them.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `Y'.
+
+CONFIG_IP_NF_QUEUE
+  Netfilter has the ability to queue packets to user space: the
+  netlink device can be used to access them using this driver.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_IPTABLES
+  iptables is a general, extensible packet identification framework.
+  The packet filtering and full NAT (masquerading, port forwarding,
+  etc) subsystems now use this: say `Y' or `M' here if you want to use
+  either of those.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_LIMIT
+  limit matching allows you to control the rate at which a rule can be
+  matched: mainly useful in combination with the LOG target ("LOG
+  target support", below) and to avoid some Denial of Service attacks.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_MAC
+  MAC matching allows you to match packets based on the source
+  Ethernet address of the packet.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_MARK
+  Netfilter mark matching allows you to match packets based on the
+  `nfmark' value in the packet.  This can be set by the MARK target
+  (see below).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_MULTIPORT
+  Multiport matching allows you to match TCP or UDP packets based on
+  a series of source or destination ports: normally a rule can only
+  match a single range of ports.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_TTL
+  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
+  to match packets by their TTL value.
+
+  If you want to compile it as a module, say M here and read
+  Documentation/modules.txt.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_LENGTH
+  This option allows you to match the length of a packet against a
+  specific value or range of values.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_AH_ESP
+  These two match extensions (`ah' and `esp') allow you to match a
+  range of SPIs inside AH or ESP headers of IPSec packets.
+
+  If you want to compile it as a module, say M here and read
+  Documentation/modules.txt.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_TOS
+  TOS matching allows you to match packets based on the Type Of
+  Service fields of the IP packet.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_STATE
+  Connection state matching allows you to match packets based on their
+  relationship to a tracked connection (ie. previous packets).  This
+  is a powerful tool for packet classification.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_UNCLEAN
+  Unclean packet matching matches any strange or invalid packets, by
+  looking at a series of fields in the IP, TCP, UDP and ICMP headers.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_OWNER
+  Packet owner matching allows you to match locally-generated packets
+  based on who created them: the user, group, process or session.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_FILTER
+  Packet filtering defines a table `filter', which has a series of
+  rules for simple packet filtering at local input, forwarding and
+  local output.  See the man page for iptables(8).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_REJECT
+  The REJECT target allows a filtering rule to specify that an ICMP
+  error should be issued in response to an incoming packet, rather
+  than silently being dropped.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_MIRROR
+  The MIRROR target allows a filtering rule to specify that an
+  incoming packet should be bounced back to the sender.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_NAT
+  The Full NAT option allows masquerading, port forwarding and other
+  forms of full Network Address Port Translation.  It is controlled by
+  the `nat' table in iptables: see the man page for iptables(8).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_MASQUERADE
+  Masquerading is a special case of NAT: all outgoing connections are
+  changed to seem to come from a particular interface's address, and
+  if the interface goes down, those connections are lost.  This is
+  only useful for dialup accounts with dynamic IP address (ie. your IP
+  address will be different on next dialup).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_NAT_SNMP_BASIC
+
+  This module implements an Application Layer Gateway (ALG) for
+  SNMP payloads.  In conjunction with NAT, it allows a network
+  management system to access multiple private networks with
+  conflicting addresses.  It works by modifying IP addresses
+  inside SNMP payloads to match IP-layer NAT mapping.
+
+  This is the "basic" form of SNMP-ALG, as described in RFC 2962
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_REDIRECT
+  REDIRECT is a special case of NAT: all incoming connections are
+  mapped onto the incoming interface's address, causing the packets to
+  come to the local machine instead of passing through.  This is
+  useful for transparent proxies.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MANGLE
+  This option adds a `mangle' table to iptables: see the man page for
+  iptables(8).  This table is used for various packet alterations
+  which can effect how the packet is routed.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_TOS
+  This option adds a `TOS' target, which allows you to create rules in
+  the `mangle' table which alter the Type Of Service field of an IP
+  packet prior to routing.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_MARK
+  This option adds a `MARK' target, which allows you to create rules
+  in the `mangle' table which alter the netfilter mark (nfmark) field
+  associated with the packet prior to routing. This can change
+  the routing method (see `Use netfilter MARK value as routing
+  key') and can also be used by other subsystems to change their
+  behavior.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_TCPMSS
+  This option adds a `TCPMSS' target, which allows you to alter the
+  MSS value of TCP SYN packets, to control the maximum size for that
+  connection (usually limiting it to your outgoing interface's MTU
+  minus 40).
+
+  This is used to overcome criminally braindead ISPs or servers which
+  block ICMP Fragmentation Needed packets.  The symptoms of this
+  problem are that everything works fine from your Linux
+  firewall/router, but machines behind it can never exchange large
+  packets:
+	1) Web browsers connect, then hang with no data received.
+	2) Small mail works fine, but large emails hang.
+	3) ssh works fine, but scp hangs after initial handshaking.
+
+  Workaround: activate this option and add a rule to your firewall
+  configuration like:
+
+        iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
+		 -j TCPMSS --clamp-mss-to-pmtu
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_MATCH_TCPMSS
+  This option adds a `tcpmss' match, which allows you to examine the
+  MSS value of TCP SYN packets, which control the maximum packet size
+  for that connection.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_ULOG
+  This option adds a `ULOG' target, which allows you to create rules in
+  any iptables table. The packet is passed to a userspace logging
+  daemon using netlink multicast sockets; unlike the LOG target
+  which can only be viewed through syslog.
+
+  The apropriate userspace logging daemon (ulogd) may be obtained from
+  http://www.gnumonks.org/projects/ulogd
+
+  If you want to compile it as a module, say M here and read
+  Documentation/modules.txt.  If unsure, say `N'.
+
+CONFIG_IP_NF_TARGET_LOG
+  This option adds a `LOG' target, which allows you to create rules in
+  any iptables table which records the packet header to the syslog.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_COMPAT_IPCHAINS
+  This option places ipchains (with masquerading and redirection
+  support) back into the kernel, using the new netfilter
+  infrastructure.  It is not recommended for new installations (see
+  `Packet filtering').  With this enabled, you should be able to use
+  the ipchains tool exactly as in 2.2 kernels.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP_NF_COMPAT_IPFWADM
+  This option places ipfwadm (with masquerading and redirection
+  support) back into the kernel, using the new netfilter
+  infrastructure.  It is not recommended for new installations (see
+  `Packet filtering').  With this enabled, you should be able to use
+  the ipfwadm tool exactly as in 2.0 kernels.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
diff -urN linux-2.5.3-pre4/net/ipv4/netfilter/ipfwadm_core.c linux/net/ipv4/netfilter/ipfwadm_core.c
--- linux-2.5.3-pre4/net/ipv4/netfilter/ipfwadm_core.c	Thu Jan 24 12:35:18 2002
+++ linux/net/ipv4/netfilter/ipfwadm_core.c	Thu Jan 24 12:35:38 2002
@@ -688,7 +688,7 @@
 		ftmp = *chainptr;
 		*chainptr = ftmp->fw_next;
 		kfree(ftmp);
-		MOD_DEC_USE_COUNT();
+		MOD_DEC_USE_COUNT;
 	}
 	restore_flags(flags);
 }
@@ -732,7 +732,7 @@
 	ftmp->fw_next = *chainptr;
        	*chainptr=ftmp;
 	restore_flags(flags);
-	MOD_INC_USE_COUNT();
+	MOD_INC_USE_COUNT;
 	return(0);
 }
 
@@ -783,7 +783,7 @@
 	else
         	*chainptr=ftmp;
 	restore_flags(flags);
-	MOD_INC_USE_COUNT();
+	MOD_INC_USE_COUNT;
 	return(0);
 }
 
@@ -858,7 +858,7 @@
 	}
 	restore_flags(flags);
 	if (was_found) {
-		MOD_DEC_USE_COUNT();
+		MOD_DEC_USE_COUNT;
 		return 0;
 	} else
 		return(EINVAL);
diff -urN linux-2.5.3-pre4/net/ipv6/netfilter/Config.help linux/net/ipv6/netfilter/Config.help
--- linux-2.5.3-pre4/net/ipv6/netfilter/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/ipv6/netfilter/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,97 @@
+CONFIG_IP6_NF_MATCH_MAC
+  mac matching allows you to match packets based on the source
+  Ethernet address of the packet.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_MATCH_MARK
+  Netfilter mark matching allows you to match packets based on the
+  `nfmark' value in the packet.  This can be set by the MARK target
+  (see below).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_MATCH_MULTIPORT
+  Multiport matching allows you to match TCP or UDP packets based on
+  a series of source or destination ports: normally a rule can only
+  match a single range of ports.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_QUEUE
+
+  This option adds a queue handler to the kernel for IPv6
+  packets which lets us to receive the filtered packets
+  with QUEUE target using libiptc as we can do with
+  the IPv4 now.
+
+  (C) Fernando Anton 2001
+  IPv64 Project - Work based in IPv64 draft by Arturo Azcorra.
+  Universidad Carlos III de Madrid
+  Universidad Politecnica de Alcala de Henares
+  email: fanton@it.uc3m.es
+
+  If you want to compile it as a module, say M here and read
+  Documentation/modules.txt. If unsure, say `N'.
+
+CONFIG_IP6_NF_MATCH_OWNER
+  Packet owner matching allows you to match locally-generated packets
+  based on who created them: the user, group, process or session.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_FILTER
+  Packet filtering defines a table `filter', which has a series of
+  rules for simple packet filtering at local input, forwarding and
+  local output.  See the man page for iptables(8).
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_MANGLE
+  This option adds a `mangle' table to iptables: see the man page for
+  iptables(8).  This table is used for various packet alterations
+  which can effect how the packet is routed.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_TARGET_MARK
+  This option adds a `MARK' target, which allows you to create rules
+  in the `mangle' table which alter the netfilter mark (nfmark) field
+  associated with the packet packet prior to routing. This can change
+  the routing method (see `Use netfilter MARK value as routing
+  key') and can also be used by other subsystems to change their
+  behavior.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_IPTABLES
+  ip6tables is a general, extensible packet identification framework.
+  Currently only the packet filtering and packet mangling subsystem
+  for IPv6 use this, but connection tracking is going to follow.
+  Say 'Y' or 'M' here if you want to use either of those.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_MATCH_LIMIT
+  limit matching allows you to control the rate at which a rule can be
+  matched: mainly useful in combination with the LOG target ("LOG
+  target support", below) and to avoid some Denial of Service attacks.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+CONFIG_IP6_NF_TARGET_LOG
+  This option adds a `LOG' target, which allows you to create rules in
+  any iptables table which records the packet header to the syslog.
+
+  If you want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
diff -urN linux-2.5.3-pre4/net/ipx/Config.help linux/net/ipx/Config.help
--- linux-2.5.3-pre4/net/ipx/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/ipx/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,47 @@
+CONFIG_IPX_INTERN
+  Every IPX network has an address that identifies it. Sometimes it is
+  useful to give an IPX "network" address to your Linux box as well
+  (for example if your box is acting as a file server for different
+  IPX networks: it will then be accessible from everywhere using the
+  same address). The way this is done is to create a virtual internal
+  "network" inside your box and to assign an IPX address to this
+  network. Say Y here if you want to do this; read the IPX-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto> for details.
+
+  The full internal IPX network enables you to allocate sockets on
+  different virtual nodes of the internal network. This is done by
+  evaluating the field sipx_node of the socket address given to the
+  bind call. So applications should always initialize the node field
+  to 0 when binding a socket on the primary network. In this case the
+  socket is assigned the default node that has been given to the
+  kernel when the internal network was created. By enabling the full
+  internal IPX network the cross-forwarding of packets targeted at
+  'special' sockets to sockets listening on the primary network is
+  disabled. This might break existing applications, especially RIP/SAP
+  daemons. A RIP/SAP daemon that works well with the full internal net
+  can be found on <ftp://ftp.gwdg.de/pub/linux/misc/ncpfs/>.
+
+  If you don't know what you are doing, say N.
+
+CONFIG_SPX
+  * Orphaned entry retained 20 April 2001 by Petr Vandrovec     *
+  * If you read this note from the configurator, please contact *
+  * the Configure.help maintainers.                             *
+  The Sequenced Packet eXchange protocol is a transport layer protocol
+  built on top of IPX. It is used in Novell NetWare systems for
+  client-server applications and is similar to TCP (which runs on top
+  of IP).
+
+  Note that Novell NetWare file sharing does not use SPX; it uses a
+  protocol called NCP, for which separate Linux support is available
+  ("NCP file system support" below for the client side, and the user
+  space programs lwared or mars_nwe for the server side).
+
+  Say Y here if you have use for SPX; read the IPX-HOWTO at
+  <http://www.linuxdoc.org/docs.html#howto> for details.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called af_spx.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/net/irda/Config.help linux/net/irda/Config.help
--- linux-2.5.3-pre4/net/irda/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/irda/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,63 @@
+CONFIG_IRDA
+  Say Y here if you want to build support for the IrDA (TM) protocols.
+  The Infrared Data Associations (tm) specifies standards for wireless
+  infrared communication and is supported by most laptops and PDA's.
+
+  To use Linux support for the IrDA (tm) protocols, you will also need
+  some user-space utilities like irattach.  For more information, see
+  the file <file:Documentation/networking/irda.txt>.  You also want to
+  read the IR-HOWTO, available at
+  <http://www.linuxdoc.org/docs.html#howto>.
+
+  If you want to exchange bits of data (vCal, vCard) with a PDA, you
+  will need to install some OBEX application, such as OpenObex :
+  <http://sourceforge.net/projects/openobex/>
+
+  This support is also available as a module called irda.o.  If you
+  want to compile it as a module, say M here and read
+  <file:Documentation/modules.txt>.
+
+CONFIG_IRDA_ULTRA
+  Say Y here to support the connectionless Ultra IRDA protocol.
+  Ultra allows to exchange data over IrDA with really simple devices
+  (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
+  no management frames, simple fixed header).
+  Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
+
+CONFIG_IRDA_CACHE_LAST_LSAP
+  Say Y here if you want IrLMP to cache the last LSAP used.  This
+  makes sense since most frames will be sent/received on the same
+  connection.  Enabling this option will save a hash-lookup per frame.
+
+  If unsure, say Y.
+
+CONFIG_IRDA_FAST_RR
+  Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
+  when acting as a primary station.
+  Disabling this option will make latency over IrDA very bad. Enabling
+  this option will make the IrDA stack send more packet than strictly
+  necessary, thus reduce your battery life (but not that much).
+
+  Fast RR will make IrLAP send out a RR frame immediately when
+  receiving a frame if its own transmit queue is currently empty. This
+  will give a lot of speed improvement when receiving much data since
+  the secondary station will not have to wait the max. turn around
+  time (usually 500ms) before it is allowed to transmit the next time.
+  If the transmit queue of the secondary is also empty, the primary will
+  start backing-off before sending another RR frame, waiting longer
+  each time until the back-off reaches the max. turn around time.
+  This back-off increase in controlled via
+  /proc/sys/net/irda/fast_poll_increase
+
+  If unsure, say Y.
+
+CONFIG_IRDA_DEBUG
+  Say Y here if you want the IrDA subsystem to write debug information
+  to your syslog. You can change the debug level in
+  /proc/sys/net/irda/debug .
+  When this option is enabled, the IrDA also perform many extra internal
+  verifications which will usually prevent the kernel to crash in case of
+  bugs.
+
+  If unsure, say Y (since it makes it easier to find the bugs).
+
diff -urN linux-2.5.3-pre4/net/irda/ircomm/Config.help linux/net/irda/ircomm/Config.help
--- linux-2.5.3-pre4/net/irda/ircomm/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/irda/ircomm/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,10 @@
+CONFIG_IRCOMM
+  Say Y here if you want to build support for the IrCOMM protocol.  If
+  you want to compile it as a module (you will get ircomm.o and
+  ircomm-tty.o), say M here and read <file:Documentation/modules.txt>.
+  IrCOMM implements serial port emulation, and makes it possible to
+  use all existing applications that understands TTY's with an
+  infrared link.  Thus you should be able to use application like PPP,
+  minicom and others.  Enabling this option will create two modules
+  called ircomm and ircomm_tty.
+
diff -urN linux-2.5.3-pre4/net/irda/irlan/Config.help linux/net/irda/irlan/Config.help
--- linux-2.5.3-pre4/net/irda/irlan/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/irda/irlan/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,11 @@
+CONFIG_IRLAN
+  Say Y here if you want to build support for the IrLAN protocol.  If
+  you want to compile it as a module (irlan.o), say M here and read
+  <file:Documentation/modules.txt>.  IrLAN emulates an Ethernet and
+  makes it possible to put up a wireless LAN using infrared beams.
+
+  The IrLAN protocol can be used to talk with infrared access points
+  like the HP NetbeamIR, or the ESI JetEye NET.  You can also connect
+  to another Linux machine running the IrLAN protocol for ad-hoc
+  networking!
+
diff -urN linux-2.5.3-pre4/net/irda/irnet/Config.help linux/net/irda/irnet/Config.help
--- linux-2.5.3-pre4/net/irda/irnet/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/irda/irnet/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,11 @@
+CONFIG_IRNET
+  Say Y here if you want to build support for the IrNET protocol.  If
+  you want to compile it as a module (irnet.o), say M here and read
+  <file:Documentation/modules.txt>.  IrNET is a PPP driver, so you
+  will also need a working PPP subsystem (driver, daemon and
+  config)...
+
+  IrNET is an alternate way to tranfer TCP/IP traffic over IrDA.  It
+  uses synchronous PPP over a set of point to point IrDA sockets.  You
+  can use it between Linux machine or with W2k.
+
diff -urN linux-2.5.3-pre4/net/khttpd/Config.help linux/net/khttpd/Config.help
--- linux-2.5.3-pre4/net/khttpd/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/khttpd/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,18 @@
+CONFIG_KHTTPD
+  The kernel httpd acceleration daemon (kHTTPd) is a (limited) web
+  server built into the kernel. It is limited since it can only serve
+  files from the file system and cannot deal with executable content
+  such as CGI scripts. Serving files is sped up if you use kHTTPd.
+  If kHTTPd is not able to fulfill a request, it can transparently
+  pass it through to a user space web server such as apache.
+
+  Saying "M" here builds the kHTTPd module; this is NOT enough to have
+  a working kHTTPd. For safety reasons, the module has to be activated
+  by doing a "echo 1 > /proc/sys/net/khttpd/start" after inserting the
+  module.
+
+  Before using this, read the README in net/khttpd !
+
+  The kHTTPd is experimental. Be careful when using it on a production
+  machine. Also note that kHTTPd doesn't support virtual servers yet.
+
diff -urN linux-2.5.3-pre4/net/sched/Config.help linux/net/sched/Config.help
--- linux-2.5.3-pre4/net/sched/Config.help	Wed Dec 31 16:00:00 1969
+++ linux/net/sched/Config.help	Thu Jan 24 12:35:38 2002
@@ -0,0 +1,238 @@
+CONFIG_NET_SCH_CBQ
+  Say Y here if you want to use the Class-Based Queueing (CBQ) packet
+  scheduling algorithm for some of your network devices.  This
+  algorithm classifies the waiting packets into a tree-like hierarchy
+  of classes; the leaves of this tree are in turn scheduled by
+  separate algorithms (called "disciplines" in this context).
+
+  See the top of <file:net/sched/sch_cbq.c> for references about the
+  CBQ algorithm.
+
+  CBQ is a commonly used scheduler, so if you're unsure, you should
+  say Y here. Then say Y to all the queueing algorithms below that you
+  want to use as CBQ disciplines.  Then say Y to "Packet classifier
+  API" and say Y to all the classifiers you want to use; a classifier
+  is a routine that allows you to sort your outgoing traffic into
+  classes based on a certain criterion.
+
+  This code is also available as a module called sch_cbq.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_CSZ
+  Say Y here if you want to use the Clark-Shenker-Zhang (CSZ) packet
+  scheduling algorithm for some of your network devices.  At the
+  moment, this is the only algorithm that can guarantee service for
+  real-time applications (see the top of <file:net/sched/sch_csz.c>
+  for details and references about the algorithm).
+
+  Note: this scheduler is currently broken.
+
+  This code is also available as a module called sch_csz.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_ATM
+  Say Y here if you want to use the ATM pseudo-scheduler.  This
+  provides a framework for invoking classifiers (aka "filters"), which
+  in turn select classes of this queuing discipline.  Each class maps
+  the flow(s) it is handling to a given virtual circuit (see the top of
+  <file:net/sched/sch_atm.c>).
+
+  This code is also available as a module called sch_atm.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_PRIO
+  Say Y here if you want to use an n-band priority queue packet
+  "scheduler" for some of your network devices or as a leaf discipline
+  for the CBQ scheduling algorithm. If unsure, say Y.
+
+  This code is also available as a module called sch_prio.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_DSMARK
+  Say Y if you want to schedule packets avccording to the
+  Differentiated Services architecture proposed in RFC 2475.
+  Technical information on this method, with pointers to associated
+  RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
+
+  This code is also available as a module called sch_dsmark.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_GRED
+  Say Y here if you want to use the Generic Random Early Detection
+  (RED) packet scheduling algorithm for some of your network devices
+  (see the top of <file:net/sched/sch_red.c> for details and
+  references about the algorithm).
+
+  This code is also available as a module called sch_gred.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_RED
+  Say Y here if you want to use the Random Early Detection (RED)
+  packet scheduling algorithm for some of your network devices (see
+  the top of <file:net/sched/sch_red.c> for details and references
+  about the algorithm).
+
+  This code is also available as a module called sch_red.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_SFQ
+  Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
+  packet scheduling algorithm for some of your network devices or as a
+  leaf discipline for the CBQ scheduling algorithm (see the top of
+  <file:net/sched/sch_sfq.c> for details and references about the SFQ
+  algorithm).
+
+  This code is also available as a module called sch_sfq.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_TEQL
+  Say Y here if you want to use the True Link Equalizer (TLE) packet
+  scheduling algorithm for some of your network devices or as a leaf
+  discipline for the CBQ scheduling algorithm. This queueing
+  discipline allows the combination of several physical devices into
+  one virtual device. (see the top of <file:net/sched/sch_teql.c> for
+  details).
+
+  This code is also available as a module called sch_teql.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_TBF
+  Say Y here if you want to use the Simple Token Bucket Filter (TBF)
+  packet scheduling algorithm for some of your network devices or as a
+  leaf discipline for the CBQ scheduling algorithm (see the top of
+  <file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
+
+  This code is also available as a module called sch_tbf.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want). If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_SCH_INGRESS
+  If you say Y here, you will be able to police incoming bandwidth
+  and drop packets when this bandwidth exceeds your desired rate.
+  If unsure, say Y.
+
+  This code is also available as a module called cls_ingress.o
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want).  If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_QOS
+  Say Y here if you want to include Quality Of Service scheduling
+  features, which means that you will be able to request certain
+  rate-of-flow limits for your network devices.
+
+  This Quality of Service (QoS) support will enable you to use
+  Differentiated Services (diffserv) and Resource Reservation Protocol
+  (RSVP) on your Linux router if you also say Y to "Packet classifier
+  API" and to some classifiers below. Documentation and software is at
+  <http://icawww1.epfl.ch/linux-diffserv/>.
+
+  Note that the answer to this question won't directly affect the
+  kernel: saying N will just cause the configurator to skip all
+  the questions about QoS support.
+
+CONFIG_NET_ESTIMATOR
+  In order for Quality of Service scheduling to work, the current
+  rate-of-flow for a network device has to be estimated; if you say Y
+  here, the kernel will do just that.
+
+CONFIG_NET_CLS
+  The CBQ scheduling algorithm requires that network packets which are
+  scheduled to be sent out over a network device be classified
+  according to some criterion. If you say Y here, you will get a
+  choice of several different packet classifiers with the following
+  questions.
+
+  This will enable you to use Differentiated Services (diffserv) and
+  Resource Reservation Protocol (RSVP) on your Linux router.
+  Documentation and software is at
+  <http://icawww1.epfl.ch/linux-diffserv/>.
+
+CONFIG_NET_CLS_POLICE
+  Say Y to support traffic policing (bandwidth limits).  Needed for
+  ingress and egress rate limiting.
+
+CONFIG_NET_CLS_TCINDEX
+  If you say Y here, you will be able to classify outgoing packets
+  according to the tc_index field of the skb. You will want this
+  feature if you want to implement Differentiated Services using
+  sch_dsmark. If unsure, say Y.
+
+  This code is also available as a module called cls_tcindex.o
+  ( = code which can be inserted in and removed from the running
+  kernel whenever you want). If you want to compile it as a module,
+  say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_CLS_ROUTE4
+  If you say Y here, you will be able to classify outgoing packets
+  according to the route table entry they matched. If unsure, say Y.
+
+  This code is also available as a module called cls_route.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_CLS_FW
+  If you say Y here, you will be able to classify outgoing packets
+  according to firewall criteria you specified.
+
+  This code is also available as a module called cls_fw.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_CLS_U32
+  If you say Y here, you will be able to classify outgoing packets
+  according to their destination address. If unsure, say Y.
+
+  This code is also available as a module called cls_u32.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_CLS_RSVP
+  The Resource Reservation Protocol (RSVP) permits end systems to
+  request a minimum and maximum data flow rate for a connection; this
+  is important for real time data such as streaming sound or video.
+
+  Say Y here if you want to be able to classify outgoing packets based
+  on their RSVP requests.
+
+  This code is also available as a module called cls_rsvp.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
+CONFIG_NET_CLS_RSVP6
+  The Resource Reservation Protocol (RSVP) permits end systems to
+  request a minimum and maximum data flow rate for a connection; this
+  is important for real time data such as streaming sound or video.
+
+  Say Y here if you want to be able to classify outgoing packets based
+  on their RSVP requests and you are using the new Internet Protocol
+  IPv6 as opposed to the older and more common IPv4.
+
+  This code is also available as a module called cls_rsvp6.o ( = code
+  which can be inserted in and removed from the running kernel
+  whenever you want).  If you want to compile it as a module, say M
+  here and read <file:Documentation/modules.txt>.
+
diff -urN linux-2.5.3-pre4/scripts/Configure linux/scripts/Configure
--- linux-2.5.3-pre4/scripts/Configure	Mon Jul  2 13:56:40 2001
+++ linux/scripts/Configure	Thu Jan 24 12:35:38 2002
@@ -81,12 +81,11 @@
 #       help variable
 #
 function help () {
-  if [ -f Documentation/Configure.help ]
-  then
-     #first escape regexp special characters in the argument:
-     var=$(echo "$1"|sed 's/[][\/.^$*]/\\&/g')
-     #now pick out the right help text:
-     text=$(sed -n "/^$var[ 	]*\$/,\${
+   #first escape regexp special characters in the argument:
+   var=$(echo "$1"|sed 's/[][\/.^$*]/\\&/g')
+   #now pick out the right help text:
+   text=$(cat /dev/null $(find . -name Config.help) |
+	sed -n "/^$var[ 	]*\$/,\${
 			/^$var[ 	]*\$/c\\
 ${var}:\\
 
@@ -94,19 +93,13 @@
 			/^[^ 	]/q
 			/<file:\\([^>]*\\)>/s//\\1/g
 			p
-		    }" Documentation/Configure.help)
-     if [ -z "$text" ]
-     then
-	  echo; echo "  Sorry, no help available for this option yet.";echo
-     else
-	  (echo; echo "$text") | ${PAGER:-more}
-     fi
-  else
-     echo;
-     echo "  Can't access the file Documentation/Configure.help which"
-     echo "  should contain the help texts."
-     echo
-  fi
+		    }")
+   if [ -z "$text" ]
+   then
+	echo; echo "  Sorry, no help available for this option yet.";echo
+   else
+	(echo; echo "$text"; echo) | ${PAGER:-more}
+   fi
 }
 
 
