<?xml version="1.0"?>
<config>
  <!-- sets the connection type to use. -->
  <!-- please note that actually OBEX over network is not supported -->
  <!-- 1 means obex over serial cable -->
  <!-- 2 means obex over bluetooth    -->
  <!-- 3 means obex over IRDA         -->
  <!-- 4 means obex over network      -->
  <!-- 5 means obex over usb          -->
  <type>2</type>
  
  <!-- (Only for bluetooth) The bluetooth address if the bluetooth mode is selected.
       `hciconfig scan` to search bluetooth devices.  -->
  <bluetooth_address></bluetooth_address>
  
  <!-- (Only for bluetooth) The bluetooth channel to use.
       `sdptool browse $MAC` to search for the correct channel -->
  <bluetooth_channel></bluetooth_channel>
  
  <!-- (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (you will need access to the USB raw device) to find it. -->
  <interface>0</interface>
  
  <!-- The string that the plugin will use to identify itself. Some devices need a special string here. -->
  <identifier></identifier>
  
  <!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->
  <version>1</version>
  
  <!-- if the plugin should use wbxml -->
  <wbxml>1</wbxml>
  
  <!-- The username to use. Leave empty to not require a username -->
  <username></username>
  
  <!-- the password for the username -->
  <password></password>
 
  <!-- If wbxml is enabled, defines wether the wbxml should use string tables -->
  <usestringtable>0</usestringtable>
  
  <!-- Never send ADD command, but send REPLACE (not needed normally) -->
  <onlyreplace>0</onlyreplace>

  <!-- Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! -->
  <onlyLocaltime>0</onlyLocaltime>
  
  <!-- Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 -->
  <recvLimit>0</recvLimit>
  
  <maxObjSize>0</maxObjSize>
  
  <!-- XXX: Currently you need to write this by your own.
       Later it's planned to create such entries on the fly during
       the discovery() call. Example database field:

  <database>
     <name>Contacts</name>
     <objtype>contact</objtype>
     <objformat>vcard21</objformat>
  </database>
  -->
  
</config>
