2006-04-12 NeilBrown <neilb@suse.de>
	Set version to 1.0.8, 
	aclocal -I aclocal ; autoheader ; automake ; autoconf

2006-04-10 NeilBrown <neilb@suse.de>
	Various paranoia checks:
	gssd_proc.c: pass max_field sizes to sscanf to avoid buffer
	  overflow
	svcgssd_proc.c: range_check name.length, to ensure name.length+1
	  doesn't wrap
	idmapd.c(nfsdcb): make sure at least one byte is read before
	 zeroing the last byte that was read, otherwise memory corruption
	 is possible.

	Found by SuSE security audit.
	
2006-04-10 "Kevin Coffman" <kwc@citi.umich.edu>
	Check for sufficient version of librpcsecgss and libgssapi
	in configure.in

2006-04-10 "Kevin Coffman" <kwc@citi.umich.edu>
	Update aclocal/tcp-wrappers.m4 to define HAVE_LIBWRAP and
	HAVE_TCP_WRAPPERS as appropriate.	

2006-04-10 NeilBrown <neilb@suse.de>
	Add checking for innetgr back to configure.in
	
2006-04-10 kwc@citi.umich.edu
	Update calls to gss_export_lucid_sec_context()
	
	Change the calls to gss_export_lucid_sec_context() to match the corrected
	interface definition in libgssapi-0.9.
	
2006-04-10 kwc@citi.umich.edu
	Plug memory leaks in svcgssd
	
	Various memory leaks in the svcgssd context processing are eliminated.
	
2006-04-10 kwc@citi.umich.edu
	Fix memory leak of the AUTH structure on context negotiations
	
	Free AUTH structure after completing context negotiation and sending
	context information to the kernel.
	
2006-04-10 kwc@citi.umich.edu
	Fix support/include/config.h.in such as would be done be running autoheader.
	
2006-03-28 NeilBrown <neilb@suse.de>
	1.0.8-pre3, aclocal/autoconf/automake
	
2006-03-28 kwc@citi.umich.edu
	Use PKGCONFIG to locate gssapi and rpcsecgss header files
	
	Instead of having separate copies of the gssapi and rpcsecgss
	header files, or depending on the Kerberos gssapi header,
	locate the headers now installed with the libgssapi and librpcsecgss
	libraries.
	
	Remove local copies of the gssapi and rpcsecgss header files.
	
	This depends on the configure_use_autotools patch.
	
2006-03-28 kwc@citi.umich.edu
	Add debugging to better detect negotiation of enctype not supported by kernel
	
	Print debugging message indicating the type of encryption keys being sent
	down to the kernel.  This should make it easier to detect cases where
	unsupported encryption types are being negotiated.
	(really this time)
	
2006-03-28 kwc@citi.umich.edu
	
	Don't close and reopen all pipes on every DNOTIFY signal.
	
	From: Vince Busam <vbusam@google.com>
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Don't unnecessarily close and re-open all pipes after every DNOTIFY
	signal.  These unnecessary closes were triggering a kernel Oops.
	Original patch modified to correct segfault when unmounting last
	NFSv4 mount.
	
2006-03-28 kwc@citi.umich.edu
	Add option to specify directory to search for credentials cache files
	
	
	From: Vince Busam <vbusam@google.com>
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Add command line option to specify which directory should be searched
	to find credentials caches.
	(really this time)	
	
2006-03-28 kwc@citi.umich.edu
	Must still use knowledge of the glue context for pre-1.4 versions of MIT krb5
	
	We need to get access to the internal krb5 context pointer for
	older (pre-1.4) versions of MIT Kerberos.  We get a pointer to
	the gss glue's context.  Get the right pointer before accessing
	the context information.
	(really this time)
	
2006-03-28 kwc@citi.umich.edu
	
	Remove unused groups variable from get_ids() which was causing a compiler warning.
	(really this time)
	
2006-03-28 kwc@citi.umich.edu
	Update krb5 code to use glue routine lucid context functions
	
	
	
	The gssd code should not know about the glue layer's context structure.
	A previous patch added gss_export_lucid_sec_context() and
	gss_free_lucid_sec_context() functions to the gssapi glue layer.
	Use these functions rather than calling directly to the Kerberos
	gssapi code (which requires the Kerberos context handle rather
	than the glue's context handle).
	
	(really this time)
	
2006-03-28 kwc@citi.umich.edu
	
	Separate out context handling code for MIT Kerberos and SPKM3
	into their own file.
	(Really this time)
	
2006-03-28 Kevin Coffman <kwc@citi.umich.edu>
	User-selectable idmapping cache lifetime
	
	Read and process new configuration option, Cache-Expiration, and use
	the value to determine how long idmapping entries are cached.
	(Really this time)
	
2006-03-27 NeilBrown <neilb@suse.de>
	1.0.8-rc3

2006-03-27 kwc@citi.umich.edu
	Add debugging to better detect negotiation of enctype not supported by kernel

	Print debugging message indicating the type of encryption keys being sent
	down to the kernel.  This should make it easier to detect cases where
	unsupported encryption types are being negotiated.
	
2006-03-27
	Don't close and reopen all pipes on every DNOTIFY signal.
	
	Don't unnecessarily close and re-open all pipes after every DNOTIFY
	signal.  These unnecessary closes were triggering a kernel Oops.
	Original patch modified to correct segfault when unmounting last
	NFSv4 mount.
	
2006-03-27
	Add option to specify directory to search for credentials cache files
	
	Add command line option to specify which directory should be searched
	to find credentials caches.
	
2006-03-27 kwc@citi.umich.edu
	Must still use knowledge of the glue context for pre-1.4 versions of MIT krb5
	
	We need to get access to the internal krb5 context pointer for
	older (pre-1.4) versions of MIT Kerberos.  We get a pointer to
	the gss glue's context.  Get the right pointer before accessing
	the context information.
	
2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Remove unused variable causing compile warning
	
	Remove unused groups variable from get_ids() which was causing a compiler warning.
	
2006-03-27 kwc@citi.umich.edu
	Update krb5 code to use glue routine lucid context functions
	
	The gssd code should not know about the glue layer's context structure.
	A previous patch added gss_export_lucid_sec_context() and
	gss_free_lucid_sec_context() functions to the gssapi glue layer.
	Use these functions rather than calling directly to the Kerberos
	gssapi code (which requires the Kerberos context handle rather
	than the glue's context handle).
	
2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Separate out context handling code for MIT Kerberos and SPKM3
	into their own file.
	
2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Consolidate gssd and svcgssd since they share much code
	
	Remove directory svcgssd which was only created because the old
	build system could not handle building two daemons in the same
	directory.  This eliminates build complications since gssd and
	svcgssd also share many source files.
	
	This patch effectively removes the utils/svcgssd directory, moving
	all its files to the utils/gssd directory.  File utils/gssd/Makefile.am
	is modified with directions to build both gssd and svcgssd.
	
2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Use PKGCONFIG to locate gssapi and rpcsecgss header files
	
	Instead of having separate copies of the gssapi and rpcsecgss
	header files, or depending on the Kerberos gssapi header,
	locate the headers now installed with the libgssapi and librpcsecgss
	libraries.
	
	Remove local copies of the gssapi and rpcsecgss header files.
	
	This depends on the configure_use_autotools patch.
	
2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	User-selectable idmapping cache lifetime
	
	Read and process new configuration option, Cache-Expiration, and use
	the value to determine how long idmapping entries are cached.
	
2006-03-27 Steve Dickson <steved@redhat.com>
	Set libnfsidmap library debugging level and logging function.

	This patch adds a call to the new libnfsidmap library function 
	nfs4_set_debug(), which defines the verbosity level libnfsidmap
	should use as well as the logging function.

2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Don't close file descriptor until after calling event_del().

	Delete event processing for a file descriptor before closing it.
	This was causing hangs when used in combination with libevent-1.0b.

2006-03-27 kwc@citi.umich.edu
	Find krb5-config on SuSE 10

	SuSE 10.0 puts krb5-config in yet another obscure location.
	Look for it there and use it if found.

2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Update debian package information.

2006-03-27 Kevin Coffman <kwc@citi.umich.edu>
	Install /var/lib/nfs files using DESTDIR and add rpcsec headers to distribution

	Add "$(DESTDIR)" to the paths for the "$(statedir)" files so they are
	put in the right place when DESTDIR is defined.

	Add the rpcsec header files to EXTRA_DIST list.

2005-12-21 NeilBrown <neilb@suse.de>
	*utils/rquotad/rquota_server.c: Detect and handle both old-style
	(2.4) and new-style(2.6) quotactl.
	*utils/gssd/gss_destroy_cred: remove dependence on "head -1" which
	might need to be "head -n 1"
	*utils/nhfsstone/nhfsrun: convert "tail -1" to "tail -n 1"
	
2005-12-20 Kevin Coffman <kwc@citi.umich.edu> NeilBrown <neilb@suse.de>
	Substantial Makefile/configure rewrite.  
	Run 'autogen.sh' to create "Makefile.in" etc.

	Also add -D_FILE_OFFSET_BITS=64 to CPP_FLAGS so that mountd can
	stat and export files larger than 2Gig.

	1.0.8-rc2 released

2005-12-20 NeilBrown <neilb@suse.de>
	support/nfs/exports.c(getexportent): is a null host name is given,
	replace it with '*' so we have a non-empty host name for messages
	etc.
	utils/exportfs/exportfs.man: Correct documentation about default
	export options.

2005-12-20 Kevin Coffman <kwc@citi.umich.edu>
	utils/gssd/gssd_proc.c(create_auth_rpc_client): Use service
	  portion of clp->servicename rather than hard-coding "nfs". 

2005-12-16 NeilBrown <neilb@suse.de>
	1.0.8-rc1 released

2005-12-16 Kevin Coffman <kwc@citi.umich.edu>
	svcgssd needs -lnfs when using new function closeall().
	
	---
	Remove unused argument from nfsdopen()
	
	After previous changes, the arguement to nfsdopen() has become unused.
	Remove it.
	
	---
	Fix idmapd error reporting after call to mydaemon()
	
	After call to mydaemon(), calls to err[x] and warn[x] result
	in the message going nowhere.  Change to using idmapd_*
	versions of these routines which write to syslog.
	Original problem reported by Vincent Roqueta <vincent.roqueta@ext.bull.net>
	with a different patch.
	
	---
	Don't add @domain to names that cannot be mapped.
	
	Per rfc3530 section 5.8: when unable to map a uid to a name, don't
	add the @domain to the "nobody" name.
	
	---
	Fix idmapd for systems where sizeof(uid_t)!=4 and sizeof(gid_t)!=4
	
	Fix conversion cases where uid_t and gid_t are not 32 bits.
	
	---
	Don't segfault because mech wasn't filled in because of an error
	
	From Kevin Coffman <kwc@citi.umich.edu>
	
	Initialize mech to null to avoid segfault if an error occurs
	and mech is never returned from gss_accept_sec_context.
	
	---
	Remove use of static buffer in do_downcall
	
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Dynamically allocate buffer of the correct length rather
	than using fixed-length buffer.
	
	---
	Print better error message if rpc routine clnt_create() fails.
	
	---
	Print appropriate error messages after gss calls.
	
	Print gss error messages after calls to gss functions, even if they
	are for Kerberos only.
	
	---
	Update gssd and svcgssd to use the new gss mech glue lucid context calls.
	
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Update gssd and svcgssd to use a lucid context from SPKM3 to send down
	to the kernel.
	Update gssd and svcgssd to use the new gss mech glue lucid context calls.
	Add configure check to see if spkm3 support is available.
	
	---
	Add support for CONTINUE_NEEDED return from gss_accept_sec_context.
	
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Add CONTINUE_INIT handling to svcgssd. Store the partially complete spkm
	context handle in the out_handle of CONTINUE_INIT messages so that it is
	returned in the in_handle of subsequent messages.
	
	---
	Replace GSS_C_ANON_FLAG with GSS_C_MUTUAL_FLAG.
	
	Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
	
	Specify GSS_C_MUTUAL_FLAG rather than GSS_C_ANON_FLAG for
	spkm3.
	
	NOTE: we need a way to pass the appropriate value rather than
	hard-coding this flag.
	
	---
	Increase size of rpc send/receive buffers
	
	Change the clnt_create() to use routines which allow us to set the
	send and receive buffer size.  This is needed for larger spkm3
	exchanges including certificate chains.
	
	This has the side-effect of skipping the portmap call since
	we specify the port (by specifying the service) when getting
	the server's address information.
	
	---
	Define _LINUX_QUOTA_VERSION to 1
	
	The rquotad code is written against the "old" kernel quota interface.
	Fedora Core 4 is the only platform known to check for different
	versions, so this should not have any affect on other platforms
	and fixes the build for FC4.
	
	---

2005-12-12 Usha Ketineni <ketineni@us.ibm.com>, NeilBrown <neilb@suse.de>
	*support/nfs/rpcmisc.c(rpc_init): is stdin is a socket, but
	is already connected (as e.g. from ssh), don't assume we
	were started by inetd.

2005-11-03 Steve Dickson <SteveD@redhat.com> NeilBrown <neilb@suse.de>
	*utils/idmapd/idmaps.c:
	
	I've recently updated the nfs-utils in rawhide with the
	latest patches from the SourceForge CVS tree and the
	latest CITI patches (1.0.7-4).
	
	In testing these patches, I notice that when the server was started
	and a SIGHUP was sent to rpc.idmapd to open the nfs4.nametoid/channel
	and nfs4.idtoname/channel files, the second open (the nfs4.idtoname one)
	failed because the path (i.e. ic->ic_path) was NULL.
	
	Now the reason the ic_path was NULL was because it was never set
	during the call to nfsdopen(). nfsdopen() looks like:
	nfsdopen(char *path)
	{
	     return ((nfsdopenone(&nfsd_ic[IC_NAMEID], IC_NAMEID, path) == 0 &&
             nfsdopenone(&nfsd_ic[IC_IDNAME], IC_IDNAME, path) == 0) ? 0 
	       : -1);
	}

	Note: the call to nfsdopenone() is how the path is set in each nfsd_ic[]
	entry and nfsdopen() is only called once.
	
	So when rpc.idmap comes up and the first call to nfsdopenone() fails
	(because the server is not running) the path in nfsd_ic[IC_IDNAME] is
	never filled in because the second nfsdopenone() never happen...
	
	Now there was a CITI patche (idmapd_revert_fix_reopen_on_sighup.dif)
	that tried to address this problem but did seem to fix it.. The
	attached patch fix the problem by initializing both nfsd_ic[IC_IDNAME]
	and nfsd_ic[IC_NAMEID] structures with the needed info...
	I figured since there is no way of changing these paths or filenames
	by command line args, why not just set them during compile time...
	so that's what this patch does.
	
	This patch also changes how nfsdreopen_one() handles the
	case where the event has already been set. Unlike the CITI
	patch (idmapd_revert_fix_reopen_on_sighup.dif) which just
	just does not register the second event, my patch deletes
	the old event and the registers the new one. It just seems like
	the right thing to do since a SIGHUP means a new server just
	started so we probably should create a new event as well...
	
	steved.
	
2005-10-14 NeilBrown <neilb@suse.de>
	*utils/mountd/cache.c(nfsd_fh): Understand type 2 and type 3
	filesystem identifiers, which are used with device numbers
	That don't fit into 16 bits.

2005-10-07 Olaf Kirch <okir@suse.de>
	* utils/mountd/mountd.c(get_exportlist): Without this patch,
	showmount -e would sometimes display host names that should really
	have been subsumed under a wildcard entry.

	The problem was that the code in get_exportlist would always
	skip the next group entry after removing one FQDN.

2005-10-06 Steve Dickson <SteveD@redhat.com> NeilBrown <neilb@suse.de>
	* support/nfs/export.c: don't warn about sync/async for readonly
	exports
	* support/nfs/closeall.c: new file with function to close all 
	file descriptors from a give minimum upwards.
	* nfsd/mountd/statd/idmapd/gsssvcd: use closeall.
	* utils/mountd/mountd.c: Eliminate 3 syslog message that are
	logged for successful events. 
	* utils/mountd/mountd.c: make sure the correct hostname is used in
	the SM_NOTIFY message that is sent from a rebooted server which
	has multiple network interfaces. (bz 139101)

	Details can be found in:
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=139101

	*utils/idmapd/idmapd.c:Fixed subscripting problem in idmapd (bz
	158188) This fixes the following problem: 
         rpc.idmapd: nfsdreopen: Opening '' failed: errno 2 (No such file or directory)

	 Details can be found in:
	 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158188

	*utils/statd/statd.c(drop_privs): clear st_gid as well as st_uid
	of stat fails.
	*utils/statd/svc_run.c(my_svc_run): remove usage of undocumented
	%m format specifier.
	*utils/statd/montor.c(sm_mon_1_svc): as above
	*support/nfs/xlog.c(xlog): Changed xlog to use LOG_INFO instead of
	LOG_DEBUG so debug messages will appear w/out any config changes
	to syslog.conf. 

	
2005-09-02 Mike Frysinger <vapier@gentoo.org>
	* utils/rquotad/rquota_server.c(getquotainfo): use explicit
	struture-member copying rather than memcpy, as the element
	sizes are the same on all architectures.

2005-08-26 Kevin Coffman <kwc@citi.umich.edu>
	Add option to set rpcsec_gss debugging level (if available)

	Changes to allow gssd/svcgssd to build when using Hiemdal Kerberos
	libraries.  Note that there are still run-time issues preventing
	this from working when shared libraries for libgssapi and librpcsecgss
	are used.
	
2005-08-26 Kevin Coffman <kwc@citi.umich.edu>
	Remove the rpcsec_gss code and rely on an external library instead.

2005-08-26 Kevin Coffman <kwc@citi.umich.edu>
	*utils/mountd/mountd.c:
	mountd currently always returns AUTH_NULL and AUTH_SYS as the
	allowable flavors in mount replies.  We want it to also return gss
	flavors when appropriate. For now as a hack we just have it always
	return the KRB5 flavors as well. 

	*utils/mountd/cache.c:
	
	When attempting to mount an NFSv4 pseudofilesystem (fsid=0) and the
	actual exported directory does not exist on the server, rpc.mountd
	doesn't check the directory exists (when fsidtype=1, i.e. using fsid,
	but does check for fsidtype=0, i.e. using dev/ino).  The non-existent
	exported directory path with fsid=0 is written to the kernel via
	/proc/net/rpc/nfsd.export/channel, which leads to path_lookup() to
	return ENOENT (seems appropriate).  Unfortunately, the new_cache
	approach ignores errors returned when writing via the channel file so
	that particular error is lost and the mount request is silently ignored.
	
	Assuming it doesn't make sense to revamp the new_cache/up-call method to
	not ignore returned errors, it seems appropriate to fix the case where
	rpc.mountd doesn't check for the existence of an exported directory with
	fsid= semantics.  The following patch does this by moving the stat() up
	so it is done for both fsidtype's.  I'm not certain whether the other
	tests need to be executed for fsidtype=1, but it doesn't appear to hurt
	[Not exactly true: the comparison of inode numbers caused problems so
	now it's kept for fsidtype=0 only].
	
	Would it be also desirable to log a warning for every error, if any,
	returned by a write to any of the /proc/net/rpc/*/channel files which
	would otherwise be ignored (maybe under a debug flag)?

	* gssd/mountd/svcgssd: Changes gssd, svcgssd, and mountd to ignore a
	SIGHUP rather than dying.

	* many: Remove the gssapi code and rely on an external library instead.

2005-08-26 Kevin Coffman <kwc@citi.umich.edu>
	* utils/exportfs/exports.man: Document the "crossmnt" export export option
	* utils/gssd/krb5_util.c: 
	Add better debugging and partially revert the function
	check for gss_krb5_ccache_name.
	
	For MIT Kerberos releases up to and including 1.3.1, we *must*
	use the routine gss_krb5_ccache_name to get the K5 gssapi code
	to use a different credentials cache.
	
	For releases 1.3.2 and on, we want to use the KRB5CCNAME
	environment variable to tell it what to use.
	(A problem was reported where 1.3.5 was being used, our
	code was using gss_krb5_ccache_name, but the underlying
	code continued to use the first (or default?) credentials
	cache.  Switching to using the env variable fixed the problem.
	I cannot recreate this problem.

	*utils/gssd/krb5_util.c:
	Andrew Mahone <andrew.mahone@gmail.com> reported that reiser4
	always has DT_UNKNOWN.  He supplied patch to move the check
	for regular files after the stat() call to correctly find
	ccache files in reiser4 filesystem.
	
	Also change the name comparison so that the wrong file is
	not selected when the substring comparison is done.

	*utils/gssd/krb5_util.c:
	Limit the set of encryption types that can be negotiated by
	the Kerberos library to those that the kernel code currently
	supports.
	
	This should eventually query the kernel for the list of
	supported enctypes.

	*utils/gssd/gss_util.c, utils/svcgssd/svcgssd_main_loop.c:
	Print more information in error messages to help debugging failures.

	*utils/svcgssd/svcgssd_proc.c: Increase token buffer size and
	update error handling so that a response is always sent.

	*utils/svcgssd/svcgssd_proc.c: Add support to retrieve
	supplementary groups. 
	
	
2005-08-26 Kevin Coffman <kwc@citi.umich.edu>
	* configure.in etc
	Consolidate some of the Kerberos checking instead of repeating
	the same things for MIT and Heimdal.
	Also adds more checks to distinguish 32-bit from 64-bit
	(mainly for gssapi.h)
	Fix svcgssd Makefile so make TOP=../../ works correctly there.
	Enable running a modern autoheader.
	* utils/gssd/gss_oids.c: Use correct OID value for SPKM-3
	* utils/gssd/gss_util.c: Fix build with older MIT releases that do not define GSS_C_NT_HOSTBASED_SERVICE
	* utils/gssd/write_bytes.h, support/include/gssapi/gssapi.h:
	Length of gss_buffer_desc is a size_t which is 64-bits on a
	64-bit machine.  Kernel code expects 32-bit integer for length.
	Coerce length value into a 32-bit value when reading from or
	writing to the kernel.
	Change gssapi.h to use datatype size values obtained from
	configure rather than hard-coded values.
	* utils/idmapd/idmapd.c: The EV_INIT check here was wrong, and was
	causing idmapd to become unresponsive to server requests after
	receiving a sighup. 
	* utils/idmapd/idmapd.c: Idmapd should flush the server id<->name
	caches when its started. 

2005-04-12  G. Allen Morris III <gam3@gam3.net>

	* All Makefile: added TOP as needed for easier compile.

	* utils/nfsstat/nfsstat.c: added NFS V4 support; added the -m
	  option; Added -2, -3, and -4 options; changed -a option to -v
	  option; added long options; changed default output to not
	  show V2 NFS statistics unless used.

	* utils/nfsstat/nfsstat.man: Documented above changes; changed
	  authors email address; added BUGS section.

2005-04-07  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.7-2.

2005-04-06  Chip Salzenberg  <chip@pobox.com>

	* config.guess, config.sub: Update.

	* support/rpc/svc_auth_gss.c (_svcauth_gss): Avoid using a cast as
	an lvalue, as it is non-portable.

	* support/nfs/exports.c (parseopts): Accept "acl" option to mean
	~NFSEXP_NOACL, and "no_acl" to mean NFSEXP_NOACL.
	(putexportent): Report NFSEXP_NOACL as "no_acl", and ~NFSEXP_NOACL
	as "acl".
	* utils/exportfs/exportfs.c (dump): Report NFSEXP_NOACL as
	"no_acl".
	* utils/exportfs/exports.man: Document "no_acl".

2005-03-14  NeilBrown <neilb@cse.unsw.edu.au>
	Denis Vlasenko <vda@ilport.com.ua>
	* support/export/client.c(client_init and client_gettype):
	treat N.N.N.N as a special case of MCL_SUBNETWORK instead of 
	MCL_FQDN

2005-03-06  G. Allen Morris III <gam3@gam3.net>
	* support/nfs/cacheio.c(readline): Could not read lines greater
	than 128 bytes. [1157791] 
	* utils/exportfs/exports.man: Added a SEE ALSO section and
	fixed 2 typos. [1018450]

2005-02-28  Trond Myklebust <trond.myklebust@fys.uio.no>
	* utils/statd/rmtcall.c(statd_get_socket): If a port number is
	explicitly given, make sure to try to bind to that.
	
2005-01-11  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.7-1.
	* debian/nfs-common.default (NEED_IDMAPD, NEED_GSSD):
	Disable by default, on advice of upstream.
	* debian/nfs-kernel-server.default (NEED_SVCGSSD):
	Likewise.

	* utils/svcgssd/Makefile (predep): Symbolically link duplicated
	source files.
	(distclean): Remove symlinks to duplicated files.

2004-12-17 NeilBrown <neilb@cse.unsw.edu.au>
	Release 1.0.7

	* config.mk, configure.in: update version number, run autoconf
	* configure.in: require nfsidmap.h if gss is enabled.
	
2004-12-10 NeilBrown <neilb@cse.unsw.edu.au>
	Release 1.0.7-pre2
	
	* config.mk, configure.in: update version number, run autoconf
	
2004-12-10 Neil Brown <neilb@cse.unsw.edu.au>
	* README : note dependancy on kerberos, libevent, and nfsidmap
	* configure.in : fail if --enable-nfsv4 and libevent or
	libnfsidmap are missing.
	* configuyre.in: improve message if krb5 support is missing
	
2004-12-06 Paul Clements <paul.clements@steeleye.com>	
	* support/include/ha-callout.h: get return status from waitpid
	correctly. 
	* support/include/ha-callout.h: don't ignore SIGCHLD while waiting
	for a callout to complete.
	* utils/statd/statd.c(sigusr): print current start when re-reading
	notify list due to SIGUSR1
	* utils/statd/svc_run.c(my_svc_run): call change_state when
	re-notifying clients.
	
2004-12-06 Marc Eshel <eshel@almaden.ibm.com>
	* utils/statd/svc_run.c(my_svc_run): allow loop to exit when in
	MODE_NOTIFY_ONLY
	*utils/statd/rmtcall.c(statd_get_socket): if a hostname is given
	to statd with -n, prefer it's IP address to the default for
	listening on.
	
2004-12-06 Bruce Allan <bwa@us.ibm.com>
	* utils/mountd/auth.c(auth_reload)  Clear the "my_client" cache on
	an auth_reload to avoid old data getting used.
	
2004-12-03 NeilBrown <neilb@cse.unsw.edu.au>
	Release 1.0.7-pre1 for testing
	
	* config.mk, configure.in: update version number, run autoconf
	
2004-12-03 Trond Myklebust <trond.myklebust@fys.uio.no>

	* utils/statd/statd.c(main): ignore SIGPIPE
	
2004-11-22 "J. Bruce Fields" <bfields@fieldses.org>

	* tools/rpcdebug/rpcdebug.c: support aliases "nfsdebug" and
	"nfsddebug" and update flag names.
	* configure.in, nodist/* redhat/* nfs-utils.spec*: remove redhat
	specific files (as no-one actually uses them, especially not
	redhat), and the nodist /etc files (as they drift out-of-date, and
	the debian directory provides a suitable example.
	* utils/svcgssd_proc.c(get_ids): fix memory leak
	* utils/svcgssd/svcgssd_proc.c: Rely on count of the number of
	groups instead of using a special guard value to identify the end
	of the list. 
	* utils/idmapd/idmapd.c: don't allow Default domain and anon-uid
	or -gid to be specified on command line.
	* utils/idmapd/idmapd.c: improve error messages
	* utils/idmapd/idmapd.c: Reopen nfsd files on sighup.  Allows us
	to start up client side only (even when nfsd module not loaded),
	and then sighup later after insmodding nfsd module. 
	* utils/idmapd/idmapd.c: Make sure we catch all errors on
	daemonizing by waiting for child to report succesfull startup
	using a pipe. 
	* utils/idmapd/idmapd.c: Let libnfsidmapd parse the idmapd.conf
	file for the default domain, instead of doing that ourselves.
	* utils/gssd/gssd_proc.c: Make sure we get an error when a gssd
	downcall fails. 
	* utils/gssd/gssd_proc.c: We were forgetting to restore the euid
	on certain failures, which meant gssd could get stuck in a state
	where it didn't have permissions to read the files in rpc_pipefs
	that it needed to. 
	* utils/gssd/gssd_proc.c: Use libnfsidmapd to map gss principals
	to uids. 
	* debian/nfs-kernel-server.default: Document the NEED_SVCGSSD
	variable in /etc/default/nfs-kernel-server. 

	
2004-11-22 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/exportfs/nfsd.man: corrected typo in .BR macro usage -
	reported by Eric Raymond
	
2004-10-19 "J. Bruce Fields" <bfields@fieldses.org>

	* support/gssapi/* support/rpc/* utils/gssd/* utils/svcgssd/* etc
	initial support for GSSAPI authentication
	
2004-09-15 Neil Brown <neilb@cse.unsw.edu.au>

	* utils/statd/monitor.c(sm_unmon_1_svc): is RESTRICTED_STATD, then
	check IP address and force my_name to 127.0.0.1 to match 
	what happens in sm_mon_1_svc.  This avoid spurious "erroneous
	SM_UNMON" messages.
	* utils/statd.monitor.c(sm_unmon_all_1_svc): likewise
	
2004-09-15 "J. Bruce Fields" <bfields@fieldses.org>	

	* Assorted changes to support "gss/*" style authentication
	* utils/idmapd: new idmapd daemon for nfsv4 username lookup
	
2004-09-06 Trond Myklebust <trond.myklebust@fys.uio.no>
	Neil Brown <neilb@cse.unsw.edu.au>

	* utils/mountd/auth.c(auth_authenticate_internal): fix
	uninitialsed variable problem (causes bad error messages).

2004-09-06 Paul Clements <paul.clements@steeleye.com>
	Neil Brown <neilb@cse.unsw.edu.au>

	* utils/mountd/mountd.c(main): support --ha-callout (-H) for
	specifying a callout program
	* utils/mountd/rmtab.c: Call ha_callout on mount/unmount
	* utils/statd/monitor.c: Call ha_callout on add/del client
	* utils/statd/rmtcall.c: as above
	* utils/statd/statd.c: handle --ha-callout (-H)
	* utils/statd/svc_run.c: call notify_hosts is we have received a
	sighup
	* support/include/ha-callout.h: define ha_callout function
	 
	
2004-08-31 NeilBrown <neilb@cse.unsw.edu.au>
	* utils/mountd/cache.c(cache_process_req): clear fd after
	processing so as not to confused libc/sunrpc into thinking
	it need to do something with that fd.
	
2004-08-31 NeilBrown <neilb@cse.unsw.edu.au>

	* debian/nfs-kernel-server.init(start,stop) mount the nfsd
	filesystem, if available, before starting nfs services, and 
	unmount it afterwards.
	* etc/nodist/nfs-server: ditto
	* etc/redhat/nfs.init: likewise
	* etc/redhat/nfs: add "MOUNT_NFSD" flag to control above.
	
2004-06-08 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/exportfs/exportfs.c: Don't rmtab_read if new_cache, it
	  isn't necessary.
	* support/nfs/cacheio.c(cache_flush): Change order in which caches
	  are flushed so that dependancies don't keep things in the cache
	  too long.
	
2004-03-18  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.6-2.

2004-02-24 NeilBrown <neilb@cse.unsw.edu.au>
	from "J. Bruce Fields" <bfields@fieldses.org>

	* utils/mountd/cache.c: call auth_reload to make sure auth data is
	current before responding to kernel upcall.
	
2004-02-24 NeilBrown <neilb@cse.unsw.edu.au>
	Based on patch from  Greg Banks <gnb@melbourne.sgi.com>

	* utils/exportfs/exports.man: Document fsid= option.
	
2003-09-15 NeilBrown <neilb@cse.unsw.edu.au>

	Release 1.0.6

	* rules.mk: Add dep: rule when no OBJS, so "make dep" works in
	support/include, and depend in "predep"
	* support/export/Makefile, tools/rpcgen/Makefile,
	utils/statd/Makefile: add "predep" rule so that "make dep" works.
	* Makefile: allow a simple "make" to run ./configure and "make dep"
	if needed.
	* configure.in, nfs-utils.spec: Update version to 1.0.6
	* run autoconf
	
2003-09-12  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.6-1.

2003-09-12 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/mountd.c(main): Impose FD_SETSIZE as an upper limit
	for RLIMIT_NOFILE
	* utils/statd/statd.c(main): Ditto.

	   michael <michael@newdream.net> discovered that svc_setreqsize
	   in glibc can segfault if RLIMIT_NOFILE is bigger than
	   FD_SETSIZE, so a simple solution is to impose a hard limit.

2003-09-09  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.5-3.
	* support/export/hostname.c (get_reliable_hostbyaddr): Fix crash
	on invalid reverse DNS.
	* utils/showmount/showmount.c (main): Fix inet_ntoa() parameter.
	* tools/rpcgen/rpc_cout.c (print_header): Remove unused vars.
	* tools/rpcgen/rpc_parse.c (def_union): Likewise.

2003-08-22  Chip Salzenberg  <chip@pobox.com>

	* utils/statd/{log.h,log.c}: Rename log() to note() and L_* to
	N_*, to avoid conflict with ISO C built-in log() function.
	* utils/statd/*.c: Use note().

2003-08-20  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.5-2.

2003-08-11 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/cache.c(cache_get_filehandle): close the filehandle
	before returning.
	
2003-08-04 NeilBrown <neilb@cse.unsw.edu.au>

	* support/include/nfs/export.h, support/nfs/exports.c,
	utils/exportfs/exports.c, utils/mountd/mountd.c:  change
	NFSEXP_CROSSMNT to NFSEXP_CROSSMOUNT to avoid confusion with older
	meaning. Also remove meaningless
	NFSEXP_{UIDMAP,KERBEROS,SUNSECURE}
	
2003-08-04 NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/xtab.c, support/include/nfslib.h,
	support/nfs/cacheio.c, support/nfs/nfssvc.c,
	utils/exportfs/exportfs.c, utils/exportfs/exportfs.man,
	utils/exportfs/nfsd.man, utils/mountd/cache.c: support
	/proc/fs/nfsd/* as a perferred alternate to /proc/fs/nfs/*
	(nfs-utils-1.0.5-post2)
	
2003-08-04 NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/nfsexport.c: open channel file O_WRONLY when
	only writing.
	* utils/mountd/cache.c: maintain mountlist when new_cache is
	active. Also use O_WRONLY for channel files.
	* utils/mountd/mountd.h: mountlist_{del,add} now take a host name
	rather than an nfs_export.
	* utils/mountd/rmtab.c: ditto.
	(nfs-utils-1.5.0-post1)
	
2003-07-24  Chip Salzenberg  <chip@pobox.com>

	* support/nfs/xlog.c (xlog): Revise buffer-overflow fix to
	use Debian security team's cleaner approach.
	* debian/changelog: Version 1.0.5-1.
	* debian/nfs-kernel-server.init: Cosmetic changes.

2003-07-18 NeilBrown <neilb@cse.unsw.edu.au>

	Release 1.0.5:
	 1.0.4 was a bit of a brown-paper-bag-release because of the extra
	 'free' in auth.c.  So I'm releasing this just a few days later.

	* support/nfs/cacheio.c(cache_flush): Correct test for 'open
	failed'
	* utils/exportfs/exportfs.c(main): If "-f" given as lone option,
	check if new_cache is enabled, error if not, flush and exit if it
	is. 
	* utils/exportfs/exportfs.man: Explain -f option and explain the
	two different modes that exportfs can work in.
	* utils/mountd/mountd.c: Do not change RLIMIT_NOFILE if the -o
	option wasn't given.
	* utils/mountd/mountd.man: Record the change if default behaviour
	for RLIMIT_NOFILE.
	* configure.in, nfs-utils.spec: update version to 1.0.5 and
	run autoconf
	
2003-07-15 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/mountd.c(main): getopt string fix for 'o'
	* utils/mountd/auth.c(auth_authenticate): remove extra 'free'
	* utils/exportfs/exportfs.c(main): make 'exportfs -f' just flush
	the caches.
	* support/include/nfs/export.h: Reserve a bit for possible ACL
	related use.
	
2003-07-03 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/exportfs/nfsd.man: new man page for nfsd filesystem. Also
	assorted changed to cope with section 7 of the manual.
	* configure.in, nfs-utils.spec: Update version to 1.0.4
	* run autoconf

	This is a 'pre-release' for 1.1.0  Hopefully 1.1.0 will be the
	baseline for 2.6 and 2.8.  I.e. it should continue to work right
	through the 2.8 (or 3.0) kernel series.  Previous releases wont.

2003-07-04 NeilBrown <neilb@cse.unsw.edu.au>	
	Steve Dickson <SteveD@redhat.com>

	statd cleanup:
	* utils/statd/statd.c: create a pidfile with pid of statd, and
	truncate it when statd exists.
	* utils/statd/statd.c: drop privs by setuid to owner of SM_DIR,
	and warn if this is root.
	* utils/statd/statd.c: when statd forks, connect child to parent
	with a pipe, and send a byte down the pipe once the child is
	working properly.
	* Makefile: create and chown sm, sm.bak, state when "make install"
	* configure.in: add --with-statduser= option which defaults to
	"rpcuser" or "nobody"
	* config.mk.in: pass "statduser" through to Makefile
	
2003-07-03 NeilBrown <neilb@cse.unsw.edu.au>

	* support/include/nfs/nfs.h: Make sure correct __kernel_dev_t is
	used as the size was changed somewhere in 2.5.60-2.5.70.  Without
	this nfs-utils compiles against 2.6 headers will not work on a
	2.4 kernel.	
	
2003-07-03 NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/nfssvc.c(nfssvc): If /proc/fs/nfs/threads exists,
	set number of threads by writing to there.  This means it will
	still work when the syscall interface goes away in 2.7.

2003-07-03 NeilBrown <neilb@cse.unsw.edu.au>
	fumihiko kakuma <kakmy@mvh.biglobe.ne.jp>

	* utils/exportfs/exportfs.c(unexportfs): improve host comparison
	so as to only export the wildcard exports that were asked for.
	* support/export/export.c(export_allowed): changed to return the
	nfs_export rather than a "struct exportent", as m_changed is
	needed by called
	* support/export/rmtab.c(rmtab_read): modified to deal with
	interface change for export_allowed(), and enhanced to preserve
	m_changed flag when a wild-card export causes the creation of
	a non-wildcard export.
	
2003-07-02 NeilBrown <neilb@cse.unsw.edu.au>
	Steve Dickson <SteveD@redhat.com>

	* utils/mountd/mountd.man: Add valid kinds of debugging.
	* utils/mountd/mountd.c(main): ignore SIGPIPE
	* utils/nfsstat/nfsstat.c: fine-tune printing of warning so
	we don't get warnings about unavailable stats that weren't asked
	for.
	
2003-06-24 NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/nfsexport.c(exp_unexp): When unexporting filesystems
	via /rpc/net/rpc/nfsd*/channel, set the expiry date to 1, not
	'forever', so things disappear out of the cache rather than just
	be ignored. 
	
2003-06-16  "J. Bruce Fields" <bfields@fieldses.org>

	* utils/mountd/cache.c(nfsd_fh): don't export the export_ent
	if it wasn't found.

2003-06-16  NeilBrown	<neilb@cse.unsw.edu.au>

	* debian/nfs-kernel-server.init,etc/nodist/nfs-server,
	etc/redhat/nfs.init: when checking if V3 is supported, make sure
	nfs server 'knows' about 127.0.0.1 first.
	
2003-06-10  Chip Salzenberg  <chip@pobox.com>

	* support/nfs/xlog.c (xlog): Fix off-by-one buffer overflow bug.
	* debian/changelog: Version 1.0.3-2.

2003-05-30 Michael Griffith <grif@michaelgriffith.com>
	NeilBrown <neilb@cse.unsw.edu.au>

	utils/nfsstat/nfsstat.c(print_callstats): use unsigned
	long long to avoid overflow when printing stats.
	
2003-05-30  NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/export.c, support/include/nfslib.h,
	support/nfs/export.c, utils/exportfs/exportfs.c,
	utils/mountd/mountd.c: new export option "mountpoint"
	If no path is given, then the export point must be a
	mount point, or it won't be exported.  If a path is 
	given (e.g. mountpoint=/path) then that path must be
	a mountpoint or the exportpoint won't be exported.
	* utils/exportfs/exportfs.man: document mountpoint option.
	* support/misc/mountpoint.c: New file with is_mountpoint()
	to determine if something is a mountpoint.
	
2003-05-23  NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/cache.c(cache_get_filehandle): take a separate path
	argument as we might not be getting the filehandle for the
	mountpoint.
	* utils/mountd/mountd.c(get_rootfh): pass real path when calling
	cache_get_filehandle.
	* utils/mountd/mountd.c(get_rootfh): check export point and
	requested directory are on the same filesystem, and complain if
	not.
	
2003-05-22  NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/auth.c(auth_authenticate_internal): make sure
	portnumber is still checked when using new cache lookup.
	
2003-05-21  NeilBrown <neilb@cse.unsw.edu.au>

	* utils/exportfs/exportfs.c: Use check_new_cache and cache_flush
	 Don't actually talk to kernel when new cache is in effect, except
	 to flush
	* utils/exportfs/exportfs.c: add -f option to fully flush cache.
	* support/export/xtab.c: Only rename new xtab into place if it has
	 changed, thus preserving modify date for exportfs to use when
	 flushing.
	* support/nfs/cacheio.c: Add cache_flush
	* support/export/xtab.c: Only rename new xtab into place if it has
	 changed, thus preserving modify date for exportfs to use when
	 flushing.
	
2003-05-21  NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/client.c: Add client_compose, client_member to
	handle new composite client names
	* support/include/exportfs.h: Declare above functions.
	* utils/mountd/auth.c: use client_compose to determine calling
	client if new cache is being used.
	* utils/mountd/auth.c: call cache_export to export a filesystem if
	new_cache, check if new cache is used, and call my_svc_run instead
	of svc_run
	* utils/mountd/svc_run.c: new file defining my_svc_run
	* utils/mountd/cache.c: new file for handling cache upcalls.
	* support/nfs/cacheio.c(check_new_cache): new function to check if
	new cache should be used.
	
	
2003-05-21  NeilBrown <neilb@cse.unsw.edu.au>

	* support/include/nfs/export.h: New CROSSMNT distinct from NOHIDE
	* support/nfs/exports.c: Make CROSSMNT distinct from NOHIDE
	* utils/exportfs/exportfs.c(dump): ditto
	
2003-05-21  NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/hostname.c(get_reliable_hostbyaddr): new function
	to get host name from address with full checking of authenticity.
	* support/include/misc.h: declare above function
	* utils/mountd/auth.c(auth_authenticate_internal): remove all
	logic for authenticating address.
	* utils/mountd/auth.c(auth_authenticate): call new
	get_reliable_hostbyaddr to to hostname lookup before calling _internal.
	
	
2003-03-30  NeilBrown <neilb@cse.unsw.edu.au>

	* tools/rpcgen/rpc_main.c(find_cpp): removed
	* tools/rpcgen/rpc_main.c(open_input): use execvp to find "cpp", 
	then try hard-coded paths.
	
2003-03-26  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.3-1.

2003-03-26 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/rmtab.c (slink_safe_rename): real_newpath should be
	"const char*", not "char*".

2003-03-26 NeilBrown <neilb@cse.unsw.edu.au>

	* configure.in (VERSION): Set to "1.0.3".
	* nfs-utils.spec: Likewise.
	* configure: Regenerated.

2003-03-26 NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/cacheio.c: New File - support for read/writing
	to export cache in /proc/rpc/*/channel
	* support/nfs/Makefile: compile cacheio.c
	* support/include/nfslib.h: declare cacheio.c functions
	* support/nfs/nfsexport.c: export and unexport through
	/proc/rpc/*/channel if possible, as old syscall interface
	may not survive into 2.6 on all architectures.
	
2003-02-19 NeilBrown <neilb@cse.unsw.edu.au>	
	Ben Leslie <benno@sesgroup.net>

	* support/nfs/rpcmisc.c(rpc_init):  change test for ignoring
	"defport" from (__rpcfdtype == 0) to (__rpcpmstart==0).  The
	former would incorectly ignore defport if the application 
	explicitly set __rpcfdtype.  The later is sufficient to avoid the
	special handling in the case where stdin is an internet socket.

	* utils/mountd/mountd.c(main): Add 'n' to option list in
	getopt_long as this is a short form of --no-tcp which want being
	checked.
	
2003-02-12  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 1.0.2-2.

2002-11-27  Chip Salzenberg  <chip@pobox.com>

	* utils/mountd/rmtab.c (slink_safe_rename): Fix off-by-one buffer
	overflow bug.  Reformat per rest of source file.

2002-11-19  NeilBrown <neilb@cse.unsw.edu.au>

	* utils/exportfs/exports.man: Correct notes about whether the wild
	card characters match a period.  They do.
	
2002-10-15  Juan Gomez <juang@us.ibm.com>

	* utils/mountd/rmtab.c (slink_safe_rename): New. Support
	symlink.
	(mountlist_add): Call slink_safe_rename instead of rename.

2002-10-11  H.J. Lu <hjl@lucon.org>

	* support/include/exportfs.h (export_errno): New.

	* support/nfs/exports.c: Include <errno.h>.
	(export_errno): New.
	(getexportent): Set export_errno to EINVAL for bad option.
	(parseopts): Likewise.
	Report the location of the default sync/async option.

	* utils/exportfs/exportfs.c (main): Initialize export_errno to
	0. Return export_errno.

2002-10-11  Juan Gomez  <gomez@cs.sjsu.edu>
	NeilBrown <neilb@cse.unsw.edu.au>

	utils/statd/statd.c(killer): don't pmap_unset if in notify_only mode
	utils/statd/statd.c(main): don't pmap_unset if in notify_only mode
	
2002-09-16  Chip Salzenberg  <chip@pobox.com>

	* utils/rquotad/rquota_svc.c (main): Use int for value of getopt.

2002-09-15  Chip Salzenberg  <chip@pobox.com>

	* support/nfs/rpcmisc.c (rpc_init): Allow stdin to be a non-INET
	socket, as occurs when run from sshd.
	* debian/changelog: Version 1.0.2-1.

2002-09-12  H.J. Lu <hjl@lucon.org>

	* support/nfs/svc_socket.c: Remove HAVE_SVCTCP_SOCKET and
	HAVE_SVCUDP_SOCKET.

2002-09-12  H.J. Lu <hjl@lucon.org>

	* configure.in: Remove checking svctcp_socket and svcudp_socket.
	* configure: Regenerated.

	* support/include/config.h.in (HAVE_SVCTCP_SOCKET): Removed.
	(HAVE_SVCUDP_SOCKET): Removed.

	* support/include/nfslib.h: Undo the last change.

2002-09-12  H.J. Lu <hjl@lucon.org>

	* support/include/nfslib.h (svctcp_socket): Protect it with
	HAVE_SVCTCP_SOCKET.
	(svcudp_socket): Protect it with HAVE_SVCUDP_SOCKET.

2002-09-12  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "1.0.2".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

2002-09-12  H.J. Lu <hjl@lucon.org>

	* configure.in: Check svctcp_socket and svcudp_socket.
	* configure: Regenerated.

	* support/include/config.h.in (HAVE_SVCTCP_SOCKET): New.
	(HAVE_SVCUDP_SOCKET): New.

	* support/include/nfslib.h (svctcp_socket): New.
	(svcudp_socket): New.

	* support/nfs/Makefile (OBJS): Add svc_socket.o.

	* support/nfs/svc_socket.c: New.

	* support/nfs/rpcmisc.c (rpc_init): Call svctcp_socket and
	svcudp_socket if port is unspecified.

	* utils/nfsd/nfsd.c (main): Call getservbyname for port.

	* utils/rquotad/rquota_svc.c: Include <nfslib.h>.
	(killer): New. Signal handler to unregister.
	(main): Use killer. Call svcudp_socket to get the default
	socket.

2002-09-02 Juan Gomez <juang@us.ibm.com>
	NeilBrown <neilb@cse.unsw.edu.au>

	Add -N option to statd to run in notify-only mode.

	* utils/statd/statd.h: uncomment MODE_NOTIFY_ONLY
	* utils/statd/statd.man: document -N
	* utils/statd/statd.c: enabled -N, largely exists but needed to be
	uncommented and completed
	
2002-09-02 Juan Gomez <juang@us.ibm.com>
	NeilBrown <neilb@cse.unsw.edu.au>

	statd to have " -P directory" arg to use that directory instead
	of /var/lib/nfs.  This is useful for fail-over clusters.
	
	* utils/statd/statd.h: define SM_DIR etc as var, not const.
	* utils/statd/statd.c: define "-P" option to set SM_*
	appropriately.
	* utils/statd/monitor.c: sprintf to cope with SM_DIR not being
	a constant any more.
	* utils/statd/notify.c: ditto.
	* utils/statd/statd.man: document -P option.
	
2002-08-26  Chip Salzenberg  <chip@pobox.com>

	* utils/nfsd/nfsd.man: Fix typo.
	* debian/changelog: Version 1.0.1-1.

2002-05-29 NeilBrown <neilb@cse.unsw.edu.au>

	* let parseopts know if /etc/exports was being read or not, 
	and have it only print "no sync or async" warning in that case.
	
2002-05-06 Tom McNeal <trmcneal@attbi.com>
	NeilBrown <neilb@cse.unsw.edu.au>

	* utils/nfsstat/nfsstat.c: Handle differing format for
	   /proc/net/rpc/nfsd between pre and post 2.4.0
	
2002-04-09  NeilBrown <neilb@cse.unsw.edu.au>
	James Pearson <james-p@moving-picture.com>

	* support/nfs/rmtab.c(fendrmtabent): sync changes to 
	storage before returning, as this is critical state

2002-04-08  Sean O'Connell <sean@ee.duke.edu>
	    H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs: New.

2002-04-08  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Updated.

	* nfs-utils.spec.in: Updated.
	* nfs-utils.spec: Regenerated.

	* utils/mountd/mountd.c (longopts): Fix a typo.

	* utils/mountd/mountd.man: Updated.

2002-04-07  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfslock.init (restart): Just do stop and start.

	* etc/redhat/nfs.init: Fix a typo.

2002-04-07  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "1.0.1".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

	* README: Updated for 1.0.1.

2002-04-07  Sean O'Connell <sean@ee.duke.edu>
	    H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Read /etc/sysconfig/nfsd for NFS tuning.

2002-02-28   Steven Whitehouse <steve@gw.chygwyn.com>
	      NeilBrown <neilb@cse.unsw.edu.au>

	Add support for fsid=nn export option so that device
	numbers don't go in filehandles.
	* support/export/nfsctl.c(expsetup): if exporting and NFSEXP_FSID
	is set, pass the fsid in-place of the device number
	* support/nfs/exports.c: parse and print fsid= option.
	Also check if efname has been set, and use "command line"
	instead in error messages.
	Also, use strtol instead of atoi for anon[ug]id= so that
	bad numbers cause errors.
	
2002-01-17   Adrian Drzewiecki <drze@MissionCriticalLinux.com>
	     NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/exports.c: remove NFSEXP_ASYNC as a default
	flag so that "sync" becomes the default.
	Check that either "sync" or "async" is given as an option
	and warn if neither are present
	* utils/exportfs/exports.man: change documentation for "sync"
	to be documentation for "async".
	* utils/exportfs/exportfs.man: note that "sync" is the default
	rather than "async"
	
	
2002-01-02  Chip Salzenberg  <chip@pobox.com>

	* support/export/nfsctl.c (expsetup): Don't export entries that
	specify id mappings not supported by the kernel.  No extant kernel
	supports any significant mapping, only 'identity' (i.e. none).
	When other mappings are supported, this code will need changing.
	* debian/changelog: Version 1.0-2.

2001-12-26  Chip Salzenberg  <chip@pobox.com>

	* nfs-utils.spec (Version): Set to "1.0".
	* configure.in (VERSION): Likewise.
	* configure: Regenerated.
	* README: Rewritten.
	* debian/changelog: Version 1.0-1.

	* utils/exportfs/exports.man: Emphasize the need for options to
	immediately follow client names.  Explain that wildcards don't
	usually work on addresses, but may work when reverse DNS fails.
	Comment out a leftover TP that was TPing our indentation.
	* utils/mountd/mountd.man, utils/rquotad/rquotad.man,
	utils/statd/statd.man: Remove refs to non-existent "hosts_allow(5)".
	* debian/changelog: Version 0.3.3-6.

2001-12-20  NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/client.c(client_lookup): If a host has multiple
	IP addresses, then we must always use the result of a
	gethostbyname, not that of gethostbyaddr for exporting
	
2001-12-20  NeilBrown <neilb@cse.unsw.edu.au>

	* support/export/client.c (client_lookup): use strcasecmp when
	comparing host names
	* support/nfs/export.c (getexportent): add fromkernel arg and use
	different defaults as kernels prior to 2.4.11 assume different
	defaults in /proc/fs/nfs/exports
	* support/include/nfslib.h, support/export/export.c,
	support/export/xtab.c:  support extra "fromkernel" arg for
	getexportent. 
	
2001-12-13  Chip Salzenberg  <chip@pobox.com>

	* debian/changelog: Version 0.3.3-5.

2001-11-26  TAKAI Kousuke <takai@vlsi.kuee.kyoto-u.ac.jp>

	* support/nfs/xio.c (xskip): Call `xungetc' instead of
        `ungetc' to keep x_line more properly.

2001-11-26  Chip Salzenberg  <chip@pobox.com>

	* utils/showmount/showmount.c (main): Don't assume that strings
	starting with digits are IP addresses.
	* utils/nfsd/nfsd.c (main): Close all fds and reopen 0,1,2 on
	/dev/null before nfssvc().  Use syslog to report nfssvc errors.
	* support/misc/tcpwrapper.c, utils/mountd/mountd.man,
	utils/rquotad/rquotad.man, utils/statd/statd.man: Fix comments and
	man pages: We check host names *and* addresses with tcpwrappers.
	* debian/changelog: Version 0.3.3-4.

2001-11-21  Chip Salzenberg  <chip@pobox.com>

	* support/nfs/clients.c (cfname): Added: current clients file name.
	(setnfsclntent): Set it.
	({get,end}nfsclntent, syntaxerr): Use it.
	* support/nfs/exports.c (efname): Added: current exports file name.
	(setnfsexportent): Set it.
	(endnfsexportent, parseopts, getexport, syntaxerr): Use it.
	(parseopts): Accept old-style "crossmnt" option, for old xtabs.
	* debian/changelog: Version 0.3.3-3.

2001-10-11  Chip Salzenberg  <chip@pobox.com>

	* utils/mountd/mountd.c (main): Close fds > 2 _before_ RPC init.
	* debian/changelog: Version 0.3.3-2.

2001-10-08  Chip Salzenberg  <chip@pobox.com>

	* utils/mountd/mountd.c (main): When daemonizing, close all fds > 2.
	* utils/Makefile.in: Remove old Makefile in target 'distclean'.
	* utils/mountd/mountd.man: Update paths to /var/lib.
	* debian/*: Version 0.3.3-1, with Debian-specific fixes.

2001-10-06  Preston Brown <pbrown@redhat.com>

	* utils/nfsstat/nfsstat.man: Updated.

2001-09-24  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.3.3".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

	* README: Updated for 0.3.3.

2001-09-20 NeilBrown <neilb@cse.unsw.edu.au>

	Arrange that "exportfs -au" never does DNS lookup:
	
	* support/export/client.c (client_lookup) : add "canonical"
	flag which says that the hostname is known to be canonical, so
	don't do a lookup

	* support/export/export.c (export_create) : add "canonical"
	flag to be passed down to client_lookup
	* support/export/export.c (export_lookup) : Likewise

	* support/export/xtab.c (xtab_read) : pass appropriate
	"canonical" flag to export_lookup and export_create:
	set if reading list of filesystems currently exports
	(is_export != 1). 

	* support/export/export.c (export_read) : pass 0 as 
	"canonical" flag to export_lookup and export_create
	* support/export/rmtab.s (rmtab_read) : Likewise

	* support/include/exportfs.h : redeclare various routines
	to have "canonical" flag

	* utils/exportfs/exportfs.c (main) : redo logic for 
	"-au" to read in what is currently exported, but never even 
	look at what "should" be exported.

	* utils/exportfs/exportfs.c (unexportall) : remove this
	routine. Functionality is completely included in
	exports_update

	* utils/exportfs/exportfs.c (exportfs) : set "canonical"
	flag to zero in calls to export_lookup and export_create.

	
2001-09-20 NeilBrown <neilb@cse.unsw.edu.au>
	    Anne Milicia <milicia@missioncriticallinux.com>

	* support/export/client.c (client_lookup) call gethostbyadd
	to make sure that we have a canonical hostname, even for
	dotted-quads
	* utils/exportfs/exportfs.c (exportfs) Likewise
	
2001-09-12 NeilBrown <neilb@cse.unsw.edu.au>

	* support/nfs/exports.c (putexportent): \octal quote any spaces
	etc in a path name
	* support/nfs/xio.c (xgettok): recognise double-quote and
	\octal quoting in path names
	* utils/exportfs/exports.man: document quoting conventions
	for path names
	
2001-09-12 NeilBrown <neilb@cse.unsw.edu.au>

	* utils/mountd/auth.c (auth_authenticate_internal): Reverse
	  change from 2000-08-02:  It causes problems if someone exports
	  to both a hostname and IP addresses.  nfs-utils must be
	  consistant about the canonical name that it chooses.

2001-08-17  Ragnar Kjrstad <nfs@ragnark.vestdata.no>
	    H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfslock.init (STATDARG): New. Pass it to rpc.statd.

	* utils/statd/statd.c (longopts): Add "name".
	(usage): Add "-n/--name".
	(main): Set MY_NAME with "-n/--name".

	* utils/statd/state.c (change_state): Set MY_NAME only if it
	is NULL.
	
	* utils/statd/statd.man: Updated for "-n/--name".

2001-07-26  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec (Release): Set to 8.

2001-07-25  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Check if rpc.rquotad exists before doing
	anything about it.

2001-06-27  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Run rpc.rquotad only if it exists.

2001-06-27  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/rquota_server.c: Don't call statfs () for
	the block size. Use BLOCK_SIZE instead.

2001-06-27  H.J. Lu <hjl@lucon.org>

	* config.mk.in (CC_FOR_BUILD): Renamed from BUILD_CC.
	(CFLAGS_FOR_BUILD): New. Don't use @CFLAGS@.

	* configure.in (enable_nfsv3): Set to yes by default.
	(--enable-rquotad): Added
	(AC_PROG_CXX): Removed.
	(AC_OUTPUT): Add utils/Makefile.
	(CC_FOR_BUILD): Renamed from BUILD_CC.
	* configure: Regenerated.

	* utils/Makefile: Removed.

	* utils/Makefile.in: New.

	* nfs-utils.spec.in (rquotad): New. Set to 0 to disable
	rquotad.
	(CC_FOR_BUILD): Renamed from BUILD_CC.
	* nfs-utils.spec: Regenerated.

2001-06-15  Chip Salzenberg  <chip@debian.org>

	* debian/changelog: Version 0.3.2-2.
	* debian/*.init: Minor fixes.

2001-06-07  Lon H. Hohberger <hohberger@missioncriticallinux.com>

	* etc/nodist/nfs-server: Fixed a bug where the script would
	disable mounts from NFSv3 clients if NFSv3 is present.

2001-06-05  H.J. Lu <hjl@lucon.org>

	* utils/mountd/mountd.c (longopts): Add "descriptors/o".
	(main): Support --descriptors/-o to set the limit of the number
	of open file descriptors.
	(usage): Updated.

	* utils/mountd/mountd.man: Updated for --descriptors/-o.

2001-06-04  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec (Release): Set to 6.

2001-05-28  H.J. Lu <hjl@lucon.org>

	* utils/lockd/lockd.c (main): chdir to NFS_STATEDIR.
	* utils/mountd/mountd.c (main): Likewise.
	* utils/nfsd/nfsd.c (main): Likewise.
	* utils/rquotad/rquota_svc.c (main): Likewise.

2001-05-06  Anne Milicia <milicia@missioncriticallinux.com>

	* support/export/client.c (client_check): Check IP address
	againet netgroup.

2001-05-06  Neil Brown <neilb@cse.unsw.edu.au>

	* support/export/client.c (client_gettype): Treat `*' as
	MCL_ANONYMOUS.

2001-04-22  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Fix a typo.
	* nfs-utils.spec: Regenerated.

2001-04-21  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Fix cross build.
	* nfs-utils.spec: Regenerated.
	(Release): Set to 5.

2001-04-18  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Support cross build.
	* nfs-utils.spec: Regenerated.
	(Release): Set to 4.

	* config.sub: New.
	* config.guess: New.

	* config.mk.in (BUILD_CC): New.
	(CC): Set to $(BUILD_CC) if BUILD is defined.
	(AR): Set to @AR@.
	(LD): Set to @LD@.
	(RANLIB): Set to @RANLIB@.

	* configure.in: Check BUILD_CC, RANLIB, AR and LD.
	* configure: Regenerated.

	* tools/rpcgen/Makefile (BUILD): Set to true.

2001-04-01  Chip Salzenberg  <chip@valinux.com>

	* tools/rpcgen/rpc_svcout.c (write_timeout_func): Remove
	redundant, and sometimes broken, declaration of svc_fdset;
	it may be a macro.
	* support/nfs/rpcmisc.c (closedown): Likewise.
	
2001-03-21  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec: Regenerated.
	(Release): Set to 3.

2001-03-21  Ion Badulescu  <ionut@cs.columbia.edu>

	* utils/statd/statd.c (main): make sure file descriptors 0-2
	are open to /dev/null.

2001-03-21  H.J. Lu <hjl@lucon.org>

	* support/nfs/rpcmisc.c: Restore the change made on 2001-03-10.
	* support/nfs/rpcmisc.c: Likewise.
	* utils/rquotad/rquota_svc.c: Likewise.
	* utils/rquotad/rquotad.man: Likewise.
	* utils/statd/Makefile: Likewise.
	* utils/statd/rmtcall.c: Likewise.
	* utils/statd/simulate.c: Likewise.
	* utils/statd/statd.c: Likewise.
	* utils/statd/statd.man: Likewise.

2001-03-11  H.J. Lu <hjl@lucon.org>

	* configure.in (RELEASE): New. Default to 1, set by
	--with-release=XXX. Substitute nfs-utils.spec.
	* nfs-utils.spec.in (Release): Set to @RELEASE@.
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

2001-03-11  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/rquotad.man: Fix a typo.

2001-03-11  H.J. Lu <hjl@lucon.org>

	* support/include/rpcmisc.h: Undo the change made on 2001-03-10.
	* support/nfs/rpcmisc.c: Likewise.
	* utils/rquotad/rquota_svc.c: Likewise.
	* utils/rquotad/rquotad.man: Likewise.
	* utils/statd/Makefile: Likewise.
	* utils/statd/rmtcall.c: Likewise.
	* utils/statd/simulate.c: Likewise.
	* utils/statd/statd.c: Likewise.
	* utils/statd/statd.man: Likewise.

2001-03-10  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.3.2".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

	* README: Updated for 0.3.2.

2001-03-10  Tavis Barr <tavis@boole.isetr.columbia.edu>

	* utils/rquotad/rquotad.man: Updated for -p.
	* utils/statd/statd.man: Likewise.

2001-03-10  Ion Badulescu  <ionut@cs.columbia.edu>

	* support/nfs/rpcmisc.c: export makesock()

	* support/include/rpcmisc.h (makesock): Declared.

	* utils/rquotad/rquota_svc.c: added longopts, added support for
	specifying the port to bind to on the command line.

	* utils/statd/statd.c: ditto, also specify port used for
	outgoing connections.
	(do_regist): Removed.

	* utils/statd/rmtcall.c (statd_get_socket): Renamed from
	get_socket. Make it extern.

	* utils/statd/simulate.c (daemon_simulator): Call rpc_init
	instead of do_regist.

	* utils/statd/Makefile (LIBS): link with our own libnfs

2001-03-09  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfslock.init: Changed chkconfig line to 60 86.
	* etc/nodist/nfs-client: Likewise.

2001-02-26  Chip Salzenberg  <chip@valinux.com>

	* debian/changelog: Version 0.3.1-1.
	* Mention upstream source and license in copyright file.
	* Add build-Depends for debhelper and libwrap0-dev.

2001-02-20  Lon Hohberger <hohberger@missioncriticallinux.com>

	* etc/nodist/nfs-server: Changed chkconfig line to 60 20
	* etc/nodist/nfs-client: Likewise.

2001-02-18  Lon Hohberger <hohberger@missioncriticallinux.com>

	* utils/statd/statd.man: Changed /usr/sbin/rpc.statd to
	/sbin/rpc.statd.

2001-02-17  Patrick J. LoPresti <patl@curl.com>

	* utils/statd/log.c (log_init): Use LOG_DAEMON instead of
	LOG_LOCAL5.

2001-02-14  H.J. Lu <hjl@lucon.org>

	* utils/statd/rmtcall.c: Include <time.h>.
	* utils/statd/svc_run.c: Likewise.

2001-02-14  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.3.1".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

	* README: Updated for 0.3.1.

2001-02-14  H.J. Lu <hjl@lucon.org>

	* support/nfs/rpcmisc.c: Include <time.h>.

2001-02-14  Chip Salzenberg  <chip@valinux.com>

	* debian/control: Change priority of nhfsstone package to 'extra'.

2001-02-12  Chip Salzenberg  <chip@valinux.com>

	* debian/changelog: Version 0.3-2.

2001-02-02  H.J. Lu <hjl@lucon.org>

	* support/include/rpcmisc.h (rpc_init): Remove bufsize.
	
	* support/nfs/rpcmisc.c (makesock): Remove socksz and comment
	out SO_SNDBUF/SO_RCVBUF.
	(rpc_init): Remove bufsize and remove socksz in calls to
	makesock ().

	* utils/mountd/mountd.c (main): Remove bufsize in calls to
	rpc_init ().

2001-01-28  Chip Salzenberg  <chip@valinux.com>

	* debian/changelog: Version 0.3-1.

2001-01-25  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.3".
	* configure: Regenerated.
	* nfs-utils.spec: Likewise.

	* README: Updated for 0.3.

2001-01-25  H.J. Lu <hjl@lucon.org>

	* utils/lockd/lockd.c (main): Ignore errno == EINVAL.

2001-01-20  Chip Salzenberg  <chip@valinux.com>

	* support/include/xio.h (xgetc): Declare to return int.
	* support/nfs/xio.c (xgetc): Return int.
	(xgettok, xskip, xskipcomment): Use int for value of xgetc.
	* utils/statd/statd.c (main): Use int for value of getopt.
	* debian/changelog: Version 0.2.1-5.
	
2000-12-10  Chip Salzenberg  <chip@valinux.com>

	* utils/statd/monitor.c (sm_mon_1_svc): Fix buggy check for
	program and procedure numbers of kernel lockd's callback.  Also,
	besides the old (and broken) procedure #24, allow #16 per Trond.

2000-12-03  Chip Salzenberg  <chip@valinux.com>

	* support/nfs/xio.c (xfopen): Initialize x_line to one, not zero.
	* debian/control: Let nhfsstone replace files in nfs-kernel-server.
	* debian/changelog: Version 0.2.1-4.

2000-11-27  Tobias Ringstrom <tori@tellus.mine.nu>

	* utils/mountd/auth.c (auth_authenticate): Log the bad path
	warning.

2000-11-24  Neil Brown <neilb@cse.unsw.edu.au>

        * support/nfs/exports.c (getexportent): Check for host name
	without option, or options without hostname, and print a warning,
	as this is most likely a typo.

2000-11-19  Chip Salzenberg  <chip@valinux.com>

	* debian/control: Add dependency on portmap.
	* debian/changelog: Version 0.2.1-3.

2000-11-10  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Don't use libtool.
	Add ChangeLog and COPYING to doc.
	* nfs-utils.spec: Rebuild.

2000-11-09  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init (start): Back out the last change.

2000-11-09  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init (start): Pass --no-tcp to mountd if
	TCP is not supported by kernel.

	* support/nfs/rpcmisc.c (rpc_init): Don't set _rpcfdtype to 0.

	* utils/mountd/mountd.c (longopts): Add "-n/--no-tcp".
	(main): Set to _rpcfdtype to SOCK_DGRAM for "-n/--no-tcp".

	* utils/mountd/mountd.man: Updated for "-n/--no-tcp".

2000-10-24  Lon Hohberger <hohberger@missioncriticallinux.com>

	* utils/statd/callback.c: Fix bug preventing callbacks to local lockd.
	* utils/statd/rmtcall.c: Add some IP address paranoia when doing
	callbacks to local lockd.

2000-10-18  Scott McDermott <mcdermot@questra.com>

	* utils/exportfs/exports.man: Updated for CIDR netmask.

2000-10-17  Scott McDermott <mcdermot@questra.com>

	* support/export/client.c (client_init): Support CIDR netmask
	in /etc/exports.

2000-10-11  H.J. Lu <hjl@lucon.org>

	* aclocal.m4 (AC_TCP_WRAPPER): Fix a typo.
	* configure: Rebuilt.

2000-10-06  Lon Hohberger <hohberger@missioncriticallinux.com>

	* utils/statd/statd.man: Change "/var/lib/nfs/sm/state" to
	"/var/lib/nfs/state".

2000-10-05  Lon Hohberger <hohberger@missioncriticallinux.com>

	* utils/statd/statd.h (run_mode): New global bitmask of runtime
	behaviors: fg/bg, logging, etc.
	* utils/statd/statd.c: New command line options: -V -h -? -d .
	* utils/statd/statd.man: Update for changes to statd.

	* utils/statd/log.h (log_init): Remove parameter of function; use
	global variable "name_p" instead.
	* utils/statd/log.c: Add support for logging to stderr.

	* utils/statd/notlist.c: Partially rewrite notify list handling
	functions.  Eliminate run-off-end-of-list bug when calling
	nlist_insert_timer.  Add lots of comments.
	
2000-09-27  H.J. Lu <hjl@lucon.org>

	* README: Updated for RedHat 7.0.

2000-09-27  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec: Rebuild.

2000-09-27  H.J. Lu <hjl@lucon.org>

	* README: Updated for 0.2.1.

2000-09-27  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Updated to use rpm macros and support
	RedHat 7.0.

2000-09-25  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.2.1".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-09-25  H.J. Lu <hjl@lucon.org>

	* utils/mountd/auth.c (auth_authenticate_internal): Make sure a
	non-NULL hostent is always returned.

2000-09-11  Ion Badulescu  <ionut@cs.columbia.edu>

	* etc/redhat/nfslock.init: don't kill lockd processes that do not
	have an executable (i.e. kernel threads)

2000-09-01  H.J. Lu <hjl@lucon.org>

	* README: Updated for 0.2.

2000-09-01  Jay Weber <jweber@valinux.com>

	* etc/redhat/nfs.init: Added ability for rpc.mountd to default to
	supporting version 3 of nfs if available, else it will fall back to
	version 2 support only.

2000-08-30  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.2".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-08-25  H.J. Lu <hjl@lucon.org>

	* support/misc/tcpwrapper.c (logit): Modify the log output.

2000-08-25  Ion Badulescu  <ionut@cs.columbia.edu>

	* utils/rquotad/rquotad.man, utils/statd/statd.man,
	utils/mountd/mountd.man: updated
        
	* utils/mountd/Makefile (LIBS): added -lmisc $(LIBWRAP) $(LIBNSL)
	* utils/rquotad/Makefile: fix comment

	* support/misc/tcpwrapper.c (logit): added comment about waiting
	for the children after fork()
	
	* utils/mountd/mountd.c (main): ignore SIGCHLD to prevent leaving
	zombies behind (from logit()'s fork)
	* utils/rquotad/rquota_svc.c (main): ditto
	* utils/statd/statd.c (main): ditto

	* utils/rquotad/rquota_svc.c (rquotaprog_1): pass RQUOTAPROG
	to check_default instead of 0, for prognum

	* utils/statd/statd.c (sm_prog_1_wrapper): pass SM_PROG
	to check_default instead of 0, for prognum

	* utils/mountd/mount_dispatch.c: Include "tcpwrapper.h" if
	HAVE_TCP_WRAPPER is defined.
	(mount_dispatch): Call check_default () if HAVE_TCP_WRAPPER is
	defined. Reject an RPC call if check_default () fails.

2000-08-25  H.J. Lu <hjl@lucon.org>

	* support/include/tcpwrapper.h: New for the tcp wrapper
	support.
	* support/misc/Makefile: Likewise.
	* support/misc/from_local.c: Likewise.
	* support/misc/tcpwrapper.c: Likewise.

	* aclocal.m4 (AC_TCP_WRAPPER): New.
	* configure.in: Use it. Substitute LIBWRAP.
	* configure: Rebuilt.

	* config.mk.in (LIBNSL): New.
	(LIBWRAP): Likewise.

	* support/Makefile (SUBDIRS): Add misc.

	* support/lib/Makefile (LIBS): Add libmisc.a.

	* utils/rquotad/Makefile (LIBS): Add
	
		-lmisc $(LIBWRAP) $(LIBNSL)

	* utils/statd/Makefile (LIBS): Likewise.

	* utils/rquotad/rquota_svc.c: Include "tcpwrapper.h" if
	HAVE_TCP_WRAPPER is defined.
	(rquotaprog_1): Call check_default () if HAVE_TCP_WRAPPER is
	defined. Reject an RPC call if check_default () fails.

	* utils/statd/statd.c: Include "tcpwrapper.h" if
	HAVE_TCP_WRAPPER is defined.
	(sm_prog_1_wrapper): New. A wrapper for sm_prog_1. Call
	check_default () before calling sm_prog_1 (). Define it as
	sm_prog_1_wrapper if HAVE_TCP_WRAPPER is defined.

2000-08-25  Chip Salzenberg  <chip@valinux.com>

	* debian/*: Complete Debian build support.
	* etc/debian/*: Remove.

2000-08-24  Neil Brown <neilb@cse.unsw.edu.au>

	* support/export/client.c(client_check): removed the "dot+1" as a
	  ypdomain argument to innetgr as this is entirely bogus.
	  It should always be NULL.
	
2000-08-23  Neil Brown <neilb@cse.unsw.edu.au>

	* support/export/xtab.c(xtab_read): introduce new mode for
	   reading xtab. i.e. a list of exports that might be known to the
	   kernel, or might not.  These are flagged as m_exported == -1
	* support/export/xtab.c(xtab_mount_read):  call xtab_read with new
	   value "2" for xtab, meaning don't trust this too much.
	* support/include/exportfs.h(struct mexport): changed m_exported
	   from one bit to an int so that it can hold new value
	* utils/exportfs/exportfs.c(exportfs_ipdate): add an export to the
	   kernel if it is uncertain whether the kernel knows (m_exported == -1)
	* utils/mountd/mountd.c(get_rootfh): similarly export to kernel if
	   status is uncertain

	* support/nfs/xio.c(xflock): added O_CREAT when getting
	   a write lock so that missing files aren't fatal.

	* etc/debian/nfs-common: new file from "potato"
	* etc/debian/nfs-kernel-server: new file from "potato" plus fixes.
	 
2000-08-09  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Run /usr/sbin/exportfs first during
	startup to ensure all existing clients work fine.

	* support/export/xtab.c (xtab_mount_read): Pass 1 instead of 0
	to xtab_read () for reading _PATH_XTAB.

2000-08-02  H.J. Lu <hjl@lucon.org>

	* utils/mountd/auth.c (auth_authenticate_internal): Try to
	avoid the reverse name lookup.

2000-07-04  H.J. Lu <hjl@lucon.org>

	* utils/statd/log.c: Include <stdlib.h> for exit ().

	* utils/statd/misc.c (xunlink): Add `{' and `}' to quiet the
	gcc warning.

2000-07-04  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.9.1".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

2000-07-04  Neil Brown  <neilb@cse.unsw.edu.au>

	* support/export/hostname.c (hostent_dup): Handle the NULL
	h_aliases field.

2000-07-03  H.J. Lu <hjl@lucon.org>

	* README: Update the util-linux requirement.

2000-07-03  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.9".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

2000-07-03  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Run /usr/sbin/exportfs last during
	stop to ensure all clients can still access the server
	before it is shutdown.

2000-06-30  Jeff Uphoff <juphoff@transmeta.com>

	* tools/rpcgen/rpc_svcout.c (write_msg_out): Generate syslog()
 	calls with format string.
	
2000-06-28  Chip Salzenberg  <chip@valinux.com>

	* utils/statd/log.c (log): Call syslog with format string.

2000-06-27  H.J. Lu <hjl@lucon.org>

	* utils/statd/statd.c (main): Use sysconf (_SC_OPEN_MAX)
	instead of OPEN_MAX.

2000-06-27  H.J. Lu <hjl@lucon.org>

	* README: Updated.

2000-06-27  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Run /usr/sbin/exportfs last during
	startup to ensure all existing clients are exported.

	* configure.in (VERSION): Set to "0.1.8.2".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-06-06  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.8.1".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-06-06  H.J. Lu <hjl@lucon.org>

	* utils/mountd/mountd.c (mount_dump_1_svc): Cast svc_getcaller
	to "struct sockaddr_in *" for glibc 2.2.
	(mount_umnt_1_svc): Likewise.
	(mount_umntall_1_svc): Likewise.
	(mount_export_1_svc): Likewise.
	(mount_exportall_1_svc): Likewise.
	(mount_pathconf_2_svc): Likewise.
	(get_rootfh): Likewise.

2000-06-04  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init: Fix a typo in comment.

2000-05-31  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.8".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

2000-05-31  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.7.5".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* support/include/nfslib.h (exportent): Add a new field,
	r_count, to count the number of mounts from a client.
	(getrmtabent): Take a new argument for position in file.
	(putrmtabent): Likewise.
	(fgetrmtabent): Likewise.
	(fputrmtabent): Likewise.
	* support/nfs/rmtab.c (getrmtabent): Handle the new argument
	for position in file.
	(fgetrmtabent): Likewise.
	(putrmtabent): Likewise.
	(fputrmtabent): Likewise.

	* support/nfs/rmtab.c (fgetrmtabent): Get value for the new
	field, r_count.

	* support/export/rmtab.c (rmtab_read): Pass NULL as the new
	argument to getrmtabent (), fgetrmtabent (), putrmtabent ()
	and fputrmtabent ().
	* utils/mountd/rmtab.c (mountlist_add): Likewise.
	(mountlist_del): Likewise.
	(mountlist_del_all): Likewise.
	(mountlist_list): Likewise.

	* utils/mountd/rmtab.c (mountlist_add): Increment "r_count"
	for the existing entry and initialize "r_count" to 1.
	(mountlist_del): Decrement "r_count".

2000-05-18  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.7.4".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-05-18  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfs.init (restart): Just do stop and start.

2000-05-09  Jay Weber <jweber@valinux.com>

	* utils/rquotad/hasquota.c: added support for ext3 recognition
	in rquotad.
	* utils/rquotad/mntent.h: Likewise.

2000-05-01  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.7.3".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-05-01  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/rquota_server.c (getquotainfo): Skip bad
	mounting poins in /etc/fstab.

2000-05-01  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.7.2".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-05-01  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/rquota_server.c (getquotainfo): Call stat ()
	to check for the mounting point.

2000-04-29  Chip Salzenberg  <chip@valinux.com>
	    Neil Brown  <neilb@cse.unsw.edu.au>

	* Really re-use RPC ports.
	  (Fixes earlier patch.  Sorry, Neil.)

2000-04-26  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.7.1".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

2000-04-26  H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfslock.init: Check if lockd exits before killing
	it.

2000-04-25  H.J. Lu <hjl@lucon.org>

	* README: Require util-linux-2.10f-mount-rpc.patch for mount.

2000-03-21 Michael Weiser <michael@weiser.saale-net.de>

	* support/nfs/exports.c (parsesquash): Correctly set the
	return pointer.

Tue Mar 21 11:38:48 EST 2000 NeilBrown <neilb@cse.unsw.edu.au>

	* support/include/nfs/nfs.h: Removed knowledge of internals of
	     kernel filehandles (which can change) and defined nfs_fh_size
	     which has variable size
	
	* support/nfs/getfh.c: defined getfh_size to use new syscall to
	     get variable sized file handles, and change getfh{,old} to
	     use nfs_fh_size	    
	
	* utils/mountd/mountd.c: use nfd_fh_size and call getfh_size for
	     NFSv3 file handles

	* tools/Makefile, tools/nlmtest/nlmtest.c
	     nlmtest.c depended on internel format of file handles, so now
	     doesn't work.

	
2000-03-12  Chip Salzenberg  <chip@valinux.com>
	    Neil Brown  <neilb@cse.unsw.edu.au>

	* support/nfs/rpcmisc.c (rpc_init): Share transports.

2000-03-13 H.J. Lu <hjl@lucon.org>

	* etc/redhat/nfsd.init: Updated.

	* etc/redhat/nfslock.init: Updated.

	* nfs-utils.spec.in: Updated.

	* configure.in (VERSION): Set to "0.1.7".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

Wed Mar  8 09:42:43 2000 Neil Brown <neilb@cse.unsw.edu.au>

	* utils/exportfs/exportfs.c (dump): Included printing of
	   nohide, no_subtree_check, and insecure_locks

2000-02-26  Chip Salzenberg  <chip@valinux.com>

	* config.mk.in (INSTALLSUID): Strip ("-s").
	(INSTALLSCRIPT): Define.
	* utils/nhfsstone/Makefile: Use it.

2000-02-26  Chip Salzenberg  <chip@valinux.com>

	* utils/lockd/lockd.man: Create.
	* utils/lockd/Makefile: Install it.
	* utils/nhfsstone/nhfs{run,nums,graph}.man: Create.
	* utils/nhfsstone/nhfsstone.man: Change suffix from ".1".
	* utils/nhfsstone/Makefile: Install the helper scripts and
	  all four man pages.
	* utils/exportfs/exports.man: Fix typo.

2000-02-26  Chip Salzenberg  <chip@valinux.com>

	* support/nfs/xio.c (xungetc): Decrement line number when
	character to unget is newline.  Make first parameter int, so
	it can distinguish EOF from \377.
	* support/include/xio.h (xungetc): Adjust prototype.

Fri Feb  4 23:42:23 2000 Neil Brown <neilb@cse.unsw.edu.au>

	* support/include/nfs/export.h: added NFSEXP_NOAUTHNLM
	* support/nfs/exports.c: added handling for NFSEXP_NOAUTHNLM
	* utils/exportfs/exports.man: added documentation for no_auth_nlm.

	This is for supporting a new option introduced in 2.3.42

Thu Feb  3 14:55:48 2000 H.J. Lu <hjl@lucon.org>

	* COPYING: Added. GPL.

Thu Feb 03 14:40:40 2000 Cristian Gafton <gafton@redhat.com>

	* utils/rquotad/rquota_server.c (getquotainfo): Call statfs ()
	to get the block size.

Tue Jan 25 11:04:17 2000 H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: Update ftp site.

Mon Jan 17 11:48:18 2000 H.J. Lu <hjl@lucon.org>

	* README: Update hostnames.

Tue Jan 11 10:06:22 2000 H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.6".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

Mon Jan 10 14:26:33 2000 H.J. Lu <hjl@lucon.org>

	* utils/mountd/auth.c (auth_authenticate_internal): Call
	xstrdup for hostname before passing it to gethostbyname.

	* utils/mountd/mountd.c (get_exportlist): Use xstrdup instead
	of strdup.

Sun Dec 19 09:35:01 1999  H.J. Lu <hjl@lucon.org>

	* README: Update the mailing list address.

Sun Dec 19 09:22:28 1999  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.5".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

Mon Dec 13 13:40:20 1999  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/hasquota.c (hasquota): Malloc one more char
	for '/'.

Mon Dec  6 09:42:45 1999  H.J. Lu <hjl@lucon.org>

	* configure.in (VERSION): Set to "0.1.4".
	* configure: Regenerated.
	* nfs-utils.spec: Updated.

	* README: Updated.

Mon Dec  6 09:28:07 1999  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec.in: New file.

	* config.mk.in (VERSION): Changed to "nfs-utils @VERSION@".

	* configure.in (nfs-utils.spec): Added to AC_OUTPUT.

1999-12-04  Chip Salzenberg  <chip@valinux.com>

	* config.mk.in: Use $(CC) as set by configure.

1999-12-04  Chip Salzenberg  <chip@valinux.com>

	* rules.mk: Call $(MAKE) with $(MFLAGS).

Mon Nov 29 11:17:35 1999  H.J. Lu <hjl@lucon.org>

	* tools/rpcgen/rpc_main.c (h_output): Generate IXDR_GET_INT32,
	IXDR_PUT_INT32, IXDR_GET_U_INT32 and IXDR_PUT_U_INT32.

Mon Nov 29 11:17:35 1999  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec (Version): Set to 0.1.3.

	* configure.in (VERSION): Set to "nfs-utils 0.1.3".
	* configure: Regenerated.

	* README: Updated.

Mon Nov 29 11:15:47 1999  H.J. Lu <hjl@lucon.org>

	* utils/rquotad/rquota_server.c (nfsmount_to_devname): Removed.
	(_PATH_DEV_DSK): Likewise.
	(getquotainfo): Match the mounting point from /etc/mtab
	instead of calling nfsmount_to_devname ().

1999-11-24  Chip Salzenberg  <chip@valinux.com>

	* utils/statd/monitor.c (sm_mon_1_svc): Accept lockd callbacks
	to the new port 24 as well as the historical port 100021.

Tue Nov 23 10:21:34 1999 Neil Brown <neilb@cse.unsw.edu.au>

	* etc/redhat/nfsd.init (stop): moved exportfs -ua after
	stopping nfsd to stop spurious ESTALE on server shutdown.
	
Tue Nov 23 10:13:39 1999  Neil Brown <neilb@cse.unsw.edu.au>

	* support/nfs/exports.c (parseopts): make copy of opt string
	before 'nul'ing out commas so that

	# exportfs -o option1,option2 hosta:/fs hostb:/fs

        applies both options to both exports.

Thu Oct 28 12:55:42 1999  H.J. Lu <hjl@lucon.org>

	* README: Fix a few typos.

	* tools/rpcgen/rpc_cout.c (print_header): Use int32_t instead
	of long.
	* tools/rpcgen/rpc_hout.c (pdefine): Likewise.
	* tools/rpcgen/rpc_main.c (c_initialize): Likewise.
	* tools/rpcgen/rpc_parse.c (get_type): Likewise.
	(unsigned_dec): Likewise.
	* tools/rpcgen/rpc_scan.c (symbols): Likewise.
	* tools/rpcgen/rpc_util.c (tokstrings): Likewise.

	* tools/rpcgen/rpc_cout.c (emit_single_in_line): Use INT32
	instead of LONG.
	* tools/rpcgen/rpc_parse.c (get_type): Likewise.
	(unsigned_dec): Likewise.
	* tools/rpcgen/rpc_scan.c (symbols): Likewise.
	* tools/rpcgen/rpc_scan.h (tok_kind): Likewise.
	* tools/rpcgen/rpc_util.c (tokstrings): Likewise.

Thu Oct 28 11:27:51 1999 Neil Brown <neilb@cse.unsw.edu.au>

        * support/include/nfs/export.h addedd NFSEXP_NOSUBTREECHECK
        * support/nfs/exports.c: added {no_,}subtree_check and changed
          crossmnt to nohide
        * utils/exportfs/exports.man: added no_subtree_check and nohide
          and removed irrelevant stuff from unfsd.
        * support/export/rmtab.c: rmtab_read didn't quite do the right
          thing if a pathname from rmtab was a subdirectory of an export-point

Tue Oct 26 17:22:40 1999  H.J. Lu <hjl@lucon.org>

	* README: Updated ftp site.

Mon Oct 25 18:12:45 1999  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec (Version): Set to 0.1.2.

	* configure.in (VERSION): Set to "nfs-utils 0.1.2".
	* configure: Regenerated.

	* README: Updated.

Mon Oct 25 18:11:21 1999  H.J. Lu <hjl@lucon.org>

	* utils/mountd/auth.c (auth_error): Add "no_forward_dns".
	(auth_authenticate_internal): Check for NULL return on forward
	DNS lookup.
	(auth_authenticate): Handle "no_forward_dns".

Thu Oct 21 16:22:06 1999  H.J. Lu <hjl@lucon.org>

	* Version 0.1.1 released.

	* nfs-utils.spec (Version): Set to 0.1.1.

	* configure.in (VERSION): Set to "nfs-utils 0.1.1".
	* configure: Regenerated.

	* README: Updated.

Mon Oct 18 17:43:29 1999  H.J. Lu <hjl@lucon.org>

	* nfs-utils.spec (Obsoletes): Fixed a typo, change knfsd-client
	to knfsd-clients.
	(Provides): Likewise.

Mon Oct 18 14:56:22 1999  H.J. Lu <hjl@lucon.org>

	* Initial version 0.1 released.

	* configure.in (VERSION): Set to "nfs-utils 0.1".
	* configure: Regenerated.

Mon Oct 18 14:54:57 1999  H.J. Lu <hjl@lucon.org>

	* utils/mountd/mountd.c (get_exportlist): Cleanup.

	* utils/exportfs/exportfs.c (unexport_all): Unexport from
	kernel only if the entry is exported to kernel.
	(unexportfs): Likewise.

Wed Sep 08 16:49:32 1999  Neil Brown <neilb@cse.unsw.edu.au>

1/ utils/mountd/rmtab.c::mountlist_list

     This routine stats the rmtab file to see if it has changed.  It
     if has, it cleans up it's old copy of the data. But it still
     always re-read the file, thus returning multiple copies of the
     data on consecutive calls without intervening changes.
     "Showmount -a" didn't show this as it appears to sort/unique the
     data, but 'strace showmount -a' showed that the size of the
     datagram that it received grew.

     I moved the getrmtabent loop inside the mtime test.

2/ utils/exportfs/exportfs.c
   
     Many routines used the m_path field of m_export instead of
     e_path.
     According to the comment in nfslib.h, m_path should only
     be used when processing a mount request (i.e. in mountd)
     where the mountpoint may be a subdirectory of the export point.

     I changed all occurances of m_path to e_path


3/ utils/exportfs/exportfs.c:main

      extra arguments are not meaningful with -a or -r, but
      exportfs accepted them and then ignored the -a/-r, expect that
      -r would still unexport everything first.

      I generate an error if there are extra args and f_all

4/ utils/exportfs/exportfs.c:main
     extract dump out as a special case.

5/ utils/exportfs/exportfs.c
     made f_reexport a local variable.


6/ utils/exportfs/exportfs.c:main,exportall

    support/export/rmtab.c
       only  mayexport on newly created entries, don't set xtabent at all

7/ support/include/nfslib.h

      add #define _PATH_PROC_EXPORTS to be /proc/fs/nds/exports

8/ support/export/xtab.c

      xtab_mount_read loads data from _PATH_PROC_EXPORTS if it exists,
      else from xtab


9/ support/export/xtab.c

      xtab_mount_read now sets m_exported, and NOT
	xtabent and mayexport

      removed the append arguement from xtab_write as it was
	never used.

      added is_export flag to xtab_write similar to xtab_read
	if is_export, only write entries with m_xtabent or m_addxtab
	if !is_export, only write entries with m_exported
     
10/ support/export/export.c::export_allowed_internal

      added test for exp->m_mayexport, as the export tree
	may have entries that are no longer allowed to be exported,
	and so shouldn't caused deduced exported by rmtab_read

11/ utils/exportfs/exportfs.c::main
	error checking of flags.

12/ utils/exportfs/exportfs.c

	total rewrite of export and unexport logic.
	We now:
	-  build an exportslist of valid exports, based on
	   current etab file  and arguments,
        -  read rmtab to instantiate relevant wild card entries
	-  read etab to find out what is currently exported
	-  synchronise intention with reality
	-  write out etab and xtab

13/  various
	discard the m_addxtab flag
	add m_changed flag so we know what to report in exportfs

14/ utils/mountd/auth.c:auth_authenticate

	the value returned by gethostbyaddr was trusted.

	It now follows this with a call to gethostbyname
	and checks that the address is in the list.

15/ support/export/nfsctl.c::cltsetup,expsetup

	force client names to lowercase as kernel is
	sensitive to case

16/ quietened a few compiler warnings

17/ support/export/client:client_lookup

     look for pre-existing client with same name before creating
	a new one.

18/ support/include/exportfs.h

     The ordering of the MCL_* enum was:
	ANONYMOUS, FQDN, SUBNETWORK, WILDCARD, NETGROUP

     I moved ANONYMOUS to the end.

     The ordering is significant when an export entry is being searched for to 
	match a given address.  There are two problems with ANONYMOUS being first.

	1/ if a directory is exported rw to a couple of hosts and ro to everyone else,
	   then the ro case will always be found first and the privileged hosts won't get
	   their privilege
	2/ When mountd gets a request to mount an ANONYMOUSly exported tree, it creates a FQDN
	   export entry for the specific host, and writes it to xtab.
	   When another request comes from the same host, the ANONYMOUS entry is found again, 
	   before the new FQDN entry, so it creates another FQDN entry and writes it to xtab
	   again.  If causes bloat in xtab.

      Putting ANONYMOUS at the end reflects it's nature as a catch-all

19/ utils/exportfs/exportfs.man
	many updates to the man page to reflect changes to the code

-----------------------



TODO:

- allow exportfs to modify rmtab file
- make sure kernel never gets two clients with same IP address
    - possible kernel should reject
    - needs to be some way to lookup client in kernel by IP address
- maybe get kernel to do case-insensitive comparisons on client names
- remove unused clients from kernel

- change etab to xtab and xtab to xtab.active

- timestamp and/or statd-stamp in rmtab for removing old entries.

Mon Oct 18 11:48:07 1999  H.J. Lu <hjl@lucon.org>

	* linux-nfs: New directory.
	* linux-nfs/ChangeLog: Moved from ..
	* linux-nfs/INSTALL: Likewise.
	* linux-nfs/KNOWNBUGS: Likewise.
	* linux-nfs/NEW: Likewise.
	* linux-nfs/README: Likewise.
	* linux-nfs/THANKS: Likewise.
	* linux-nfs/TODO: Likewise.

	* Starting from knfsd 1.4.7.
